Standard Commercial Treadmill Owner`s Manual

C O M M E R C I A L P R O D U C T S D I V I S I O N

Diagram 16

C932i display and keypad.

Center display

PRECOR scrolling banner appears here.

SELECT key

RESET key

Keypad keys

PROGRAMMING TIPS

Certain aspects of the C932i are hidden and can only be accessed using special key presses. To avoid unauthorized use, certain rules apply. See Diagram 16. Tips to consider while programming or viewing diagnostic information are shown below:

• Always start at the scrolling PRECOR banner.

• The advanced programming and diagnostic mode is accessed by pressing the

RESET key (or the red STOP button) while the PRECOR banner is displayed.

A second key press must occur within 1/2 second after pressing RESET (or the red STOP button) or the display returns to the PRECOR banner. The third and subsequent key presses must occur within four seconds of the previous key press or the PRECOR banner returns and you will need to begin again.

Display key functions within the Club Custom Mode

▼▲ lets you scroll through the various selections that appear.

The longer the key is held down, the faster the numbers scroll past.

RESET

exits Club Custom mode and displays the PRECOR banner.

SELECT saves the information being displayed and moves to the next aspect of the program.

red STOP advances to the next aspect button of the program without storing the information that appears on the display.

QUICKSTART disabled.

• Exit the programming or diagnostic mode by pressing RESET. Note that the display remains blank for one second and any additional key presses are ignored during that second.

page 22