File Menu
Load data
Load data option
Save setting
Save data
Transfer data to Excel
This option loads a data file (.dso), with a setting file (.ini) together.
This option select of A1, A2, A3, A4 or D0 ~ D11 channel to be load.
This option saves the current settings to a setting file (.ini).
This option saves a data file (.dso), every time saves all (A1, A2,
A3, A4, D0-D11) data depend on Depth setting.
This option will convert data to Microsoft Excel by Decimal,
Hexdecimal, Ascii or unit(v).
Load setting This option loads a previously Setting file (.ini).
Load Default Setting Reset all parameters to factory defaults.
Auto. Load Setting
Turns on or turns off the Autoload option. When this option is on, all settings will be loaded when start the program.
Print Screen
Print FFT
Print Timing View
Exit
This option allows you to print Screen (Hard copy).
This option allows you to print FFT form.
This option allows you to print Main Screen Form.
Use this command to end your session. You can also use the
Close command on the application Control menu.
9