Introduction

Chapter 4 Input/Output Instructions (MSG, GSV, SSV, IOT)

Specify CIP Generic messages

Reset electronic fuses on a digital output module

A CIP Generic message performs a specific action on an I/O module.

If You Want To

Perform a pulse test on a digital output module

In This Property

Message Type

Service Type

Source

Destination

Message Type

Service Type

Source

Reset latched diagnostics on a digital input module

Destination

Message Type

Service Type

Source

Reset latched diagnostics on a digital output module

Message Type

Service Type

Source

Type Or Select

CIP Generic

Pulse Test

tag_name of type INT [5]

This array contains:

tag_name[0]

tag_name[1]

tag_name[2]

tag_name[3] bit mask of points to test (test only one point at a time) reserved, leave 0 pulse width (hundreds of

μ secs, usually 20) zero cross delay for ControlLogix I/O

(hundreds of

μ secs, usually 40) verify delay tag_name[4] leave blank

CIP Generic

Reset Electronic Fuse

tag name of type DINT

This tag represents a bit mask of the points to reset fuses on.

leave blank

CIP Generic

Reset Latched Diagnostics (I)

tag_name of type DINT

This tag represents a bit mask of the points to reset diagnostics on.

CIP Generic

Reset Latched Diagnostics (O)

tag_name of type DINT

This tag represents a bit mask of the points to reset diagnostics on.

162

Publication 1756-RM003K-EN-P - July 2008

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com