- No category
advertisement
3. OPERATION
3.1 OVERVIEW
The OCU DP module is controlled as part of the
TSU 100 using the same methods as described in the user's manual.
3.2 FRONT PANEL
I
NDICATORS
/B
UTTONS
Please refer to the description of the TSU 100 front panel indicators and buttons in the user's manual.
3.3 MENU STRUCTURE
The OCU DP menus appear as a subset of and operate the same as menus for the TSU 100. The menus are accessed by selecting 1.1 OCU DP under the PORT menu items.
Figure 3
shows the TSU 100 Main Menu with the
PORT selections shaded.
The
TSU 100 User's Manual's appendix TSU 100
Menu Tree is a complete menu diagram.
10
MAIN MENU
1)STATUS
2)CONFIG
1)NETWORK (NI)
2)UNIT
3)MAP XCHNG
4)MAP IN USE
5)DS0 MAP A
6)DS0 MAP B
7)PORT CONFIG
3)UTIL
4)TEST
1)NETWORK TESTS
2)RUN SELFTEST
3)PORT TEST
Figure 3. TSU 100 Main Menu
1)NI PERF REPORTS
2)PORTS STATUS
3)ACTIVE ALARMS
4)VIEW HISTORY
1)ENTER PASSCODE
2)TIME/DATE
3)FACT RESTORE
4)REINIT UNIT
5)UNIT ID
6)SOFTWARE REV
7)PORT UTILITY
61200.068L1-1C November 1996
advertisement
Related manuals
advertisement
Table of contents
- 14 3. Operation
- 14 3.1 Overview
- 14 3.2 Front Panel
- 14 Indicators/Buttons
- 14 3.3 Menu Structure
- 14 Figure 3. TSU 100 Main Menu
- 15 OCU DP Menus Are All Submenus
- 15 2)PORTS Status, Submenu of 1)Status
- 16 7)PORT CONFIG, Submenu of 2)CONFIG
- 18 3)FACTORY RESTORE, Submenu of 3)UTIL
- 18 7)PORT UTILITY, Submenu of 3)UTIL
- 19 2)RUN SELF TEST, Submenu of 4)TEST
- 19 3)PORT Test, Submenu of 4)TEST
- 20 Figure 4. Diagram of Loopbacks
- 22 Appendix I OCU DP Failure Messages
- 22 Failure Messages At Power-Up
- 22 OCU DP Alarm Messages