User`s manual FLIR Ex series

8

Operation

8.1

Charging the battery

8.1.1

Charging the battery using the FLIR power supply

Follow this procedure:

1. Connect the power supply to a wall outlet.

2. Connect the power supply cable to the USB connector on the camera.

NOTE

The charging time for a fully depleted battery is 2 hours.

8.1.2

Charging the battery using the FLIR stand-alone battery charger.

Follow this procedure:

1. Connect the stand-alone battery charger to a wall outlet.

2. Remove the battery from the camera.

3. Put the battery into the stand-alone battery charger.

NOTE

• The charging time for a fully depleted battery is 2 hours.

• The battery is being charged when the blue LED is flashing.

• The battery is fully charged when the blue LED is continuous.

8.1.3

Charging the battery using a USB cable

Follow this procedure:

1. Connect the camera to a computer using a USB cable.

NOTE

• To charge the camera, the computer must be turned on.

• Charging the camera using a USB cable connected to a computer takes considerably longer than using the FLIR power supply or the FLIR stand-alone battery charger.

8.2

Turning on and turning off the camera

• Push the button to turn on the camera.

• Push and hold the button for less than 5 seconds to put the camera in standby mode. The camera then automatically turns off after 48 hours.

• Push and hold the button for more than 10 seconds to turn off the camera.

#T559828; r. AD/23843/24541; en-US 14