T2 GSM Elderly Alarm System User Manual V1.0

T2 --- GSM Elderly Care Alarm System

6. How T2 works for elderly?

Push-to-Talk with families

Keep the origin design icons or stick a easy recognized photo on the buttons, just push these buttons then make a phone call with families

Push-to-Ask for help

Keep the origin design icons or stick a easy recognized photo on the buttons, just push these buttons then make a phone call with Doctor,Police station,Taxi/Cab service and neighbor/community service.

SOS alarm when under emergency situation

Make phone call

Push the SOS button for 3 seconds,T2 will send SOS alert SMS text and make a phone call to receivers for asking emergency help.

Other Wireless SOS button or fall detectors optional.

Press the keypad for make a phone call,just like a regular telephone set.

Press for answer the call in, press for end calls.

Press to erase the last number if made mistake.

24hours safety guard

When smoke,gas,CO or water flood detected,T2 will make audible alarm,send alert SMS text and call to the receivers/Call center/Firefighting or other CMS system.

Alarm clocks

T2 will make audible alarm and flash on LCD according to the timing setting.Alarm audio sounds 10 seconds and stop 2 seconds,repeat 5 times or stoped by end button .

Audio volume(1~5) can be adjust by and ,(the same volume for phone call,audible alarms).

Daily life care

T2 will send alert SMS text if no activities detected by PIR/Door sensors during the watchdog time period.

For example,install one door contact sensor on the main gate,setting time period at 16:00~18:00pm,if the main gate not opened during that time,T2 can send alert SMS to receivers.

Page 10 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

Bedtime/Get up care

Under the status, T2 will send notify SMS text of the

“bedtime” and “get up time” to the 1 st receiver.

For exampl e, install one curtain PIR sensor on Mom‟s bed room(door frame),setting the bedtime at

21:00~22:30, and get up time at 06:00~08:30,T2 will record the latest movement detection between

21:00~22:30,let‟s say at 22:10, then T2 will send notify SMS text “My bedtime: 22:10,good nite:)” to the

1 st

receiver at 22:30.

If Mom get up and the first time she walk through the door at 07:30am, T2 will send notify SMS text

“Good morning, I get up at 07:30” to the 1 st

receiver at 07:30.

If the PIR sensor didn‟t detect any movement on 21:00~23:00, and 06:00~08:30,T2 will send alert SMS text “I didn't go to sleep yet” at 22:31, and “I didn't get up yet.” at 08:31 to the 1 st

and 2 nd

receiver.

This unique function designed for take care elderly‟s health status on the evening and morning, in case of any unexpected situation, receviers can get notify SMS text and need to take care about

“are there anythin g OK”,”why mom still not get up” or “why she still not go to bed?” etc.

Stay/Away care

Press when away home, T2 will send notify SMS text

“I'm leaving home now.” to the 1 st

and 2 nd receiver,to let them know that elderly away home at that time.

T2 will send notify SMS text

“I'm at home now

.

” to the 1 st

and 2 nd

receiver when elderly back to home and pressed the button, to let them know that the elderly back home safety.

If the receiver get notify SMS text of “I'm leaving home now.” but didn‟t get SMS text of “I'm at home

now

.

” after few hours,for example:received the SMS text “I'm leaving home now.” at 16:00 but didn‟t received SMS text “I'm at home now

.

” till 22:00,then receivers should call to T2 or mobile numbers to check if elderly forgot press the Stay button or really didn‟t go back yet.

Temperature monitoring

T2 send alert SMS text to receivers when temperature higher/lower than threshold more than 10mins.

Other care

T2 will send alert SMS text to the 1 st

and 2 nd

receivers when AC/DC power lost (more than 30mins) and recovery, back up battery low power,wireless sensor‟s battery low power(if have).

Page 11 of 15 Ver 1.0