advertisement
Operations
Switching ON/OFF
ON OFF
2 sec
Device is turned
OFF.
i
If no key is pressed for 180 sec, the device switches off automatically.
Clear
1x
Undo last action.
2x
Leave actual function, go to default operation mode.
EN
Message Codes
If the info icon appears with a number, observe the instructions in section "Message Codes".
Example:
Multifunctional endpiece
i
The orientation of the endpiece is automatically detected and the zero point is accordingly adjusted.
Permament / Minimum-Maximum measuring
min.
max.
1 2
2 sec
Used to measure room diagonals (maximum values) or horizontal distance (minimum values)
Leica DISTO TM D510 792312c
The minimum and maximum distance measured is displayed (min, max.). The last value measured is displayed in the main line.
3
8.532 m
Stops permanent / minimummaximum measuring.
5
Operations
Add / Subtract
1
2x
7.332 m
2
The next measurement is added to the previous one.
The next measurement is sub-
tracted from the previous one.
3
Pointfinder (Viewscreen)
1x
1 2
4x
4x
2x
2x
1x
1x
7.332 m
12.847 m
4
3
20.179 m
EN i
This process can be repeated as required. The same process can be used for adding or subtracting areas or volumes.
1x
4
Exit pointfinder
(viewscreen).
i
This is a great help for outdoor measuring. The integrated pointfinder (viewscreen) shows the target on the display.
The device measures in the middle of the cross hair, even if the laser dot is not visible.
Parallax errors occur when the pointfinder camera is used on close targets, with the effect that the laser appears displaced in the crosshair. In this case rely on the real laser dot.
Leica DISTO TM D510 792312c
6
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Instrument Set-up
- 3 Introduction
- 3 Overview
- 4 Basic measuring screen
- 4 Selection screen
- 5 Pointfinder (Viewscreen)
- 5 Insert batteries
- 6 Operations
- 6 Switching ON/OFF
- 6 Clear
- 6 Message Codes
- 6 Multifunctional endpiece
- 6 Permament / Minimum-Maximum measuring
- 7 Add / Subtract
- 7 Pointfinder (Viewscreen)
- 8 Settings
- 8 Overview
- 8 Tilt units
- 9 Distance units
- 9 Beep ON/OFF
- 9 Digital level ON/OFF
- 10 De-/Activate keylock
- 10 Switch on with keylock
- 10 De-/Activate Bluetooth® Smart
- 11 Calibration of tilt sensor (Tilt Calibration)
- 12 Personalized favorites
- 12 Illumination
- 13 Offset
- 13 Reset
- 14 Functions
- 14 Overview
- 14 Timer
- 14 Calculator
- 15 Adjusting measuring reference/tripod
- 16 Memory
- 16 Measuring single distance
- 16 Smart Horizontal Mode
- 17 Inclination tracking
- 17 Area
- 18 Volume
- 19 Triangular area
- 19 Long range mode
- 20 Height-profile measurement
- 21 Sloped objects
- 22 Height tracking
- 23 Trapezium
- 24 Stake out
- 25 Pythagoras (2-point)
- 26 Pythagoras (3-point)
- 27 Technical Data
- 28 Message Codes
- 28 Care
- 28 Warranty
- 28 Safety Instructions
- 28 Areas of responsibility
- 29 Permitted use
- 29 Prohibited use
- 29 Hazards in use
- 29 Limits of use
- 29 Disposal
- 30 Electromagnetic Compatibility (EMC)
- 30 Use of the product with Bluetooth®
- 30 Laser classification
- 30 Labelling