APOLLO user manual

ISIS user manual

Appendix F – TV out video option board

The TV out video option board provides the ability to encode the DVO output for S-Video and composite video outputs in a wide variety of broadcast quality NTSC and PAL video output modes. Configuration of the video output mode is made using graphics options from within the operating system graphics configuration, Windows XP, XP Embedded and some Linux OS are supported.

The option board also provides the same USB functionality as the USB 5/6 breakout and is mounted in the same location. The following connections refer to pinouts on the TV Out board.

BIOS Setup

To enable the operation of the TV Out Video Option board the BIOS setup option IGD –

Boot Type in the Advanced → Video (Intel IGD) Control Sub-Menu should be set to the

TV option.

J3 – Composite TV OUT

Connector: Kycon KLPX-0848A-2-Y

Pin Signal name

1 CVBS

2 VGND

1

2

138

Issue G

Appendix F – TV out video option board

J2 – S-Video

Connector: 4-pin Mini-DIN, Kycon KMDGX-4S-BS

Pin Signal name

3 Y - Intensity

(Luminance)

4 C – Colour

(Chrominance)

J4 – USB ports 5 and 6

10-way, 2.54mm (0.1") x 2.54mm (0.1") dual row header.

Mating connector: Harwin M20-1070500

Mating connector crimps: Harwin M20-1180022

Pin Signal name

1 VBUS (port 5)

3 D- (port 5)

5 D+ (port 5)

7 Ground

9 Key (no pin)

Pin Signal name

2 VBUS (port 6)

4 D- (port 6)

6 D+ (port 6)

8 Ground

10 Ground

For error free data transmission, cable certified for USB 2.0 operation should be used.

Issue G

139