advertisement
High Reliability Options
Dual Mirrored Hard Disk Drives
An optional 2 nd
hard disk drive can be fitted into TiMax that mirrors the first disk and in the event of a hard disk failure takes over.
Dual Power Supply and cooling fan
An optional 2 nd
power supply and cooling fan can be fitted into TiMax for high reliability applications. The 2 nd
power supply has its own power cord and fuse.
Bypass
An optional analogue Bypass feature can be fitted to TiMax that allows an additional set of 8 analogue inputs to be selectively routed to pre-programmed outputs outside the DSP signal path allowing for mission critical applications to have a fail safe facility.
The Bypass system does however use analogue buffers so will not pass audio in the event of total power failure.
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Quick Start
- 6 Hardware
- 7 System Block Diagram
- 8 Audio Inputs & Outputs
- 8 Analogue I/O interface
- 8 AES3 Digital I/O and Analogue Output interface (MIO)
- 9 MIO Board Installation & Configuration
- 10 Optional Networked and Multi-channel Audio Interface
- 11 TiMax II MADI Interface Configuration
- 13 TiMax II Cobranet Interface Configuration
- 14 Control Inputs & Outputs
- 14 Ethernet
- 14 Manual Network Configuration using fixed IP addresses
- 15 GPIO Input
- 16 GPIO Output
- 17 Front Panel Controls
- 17 Group Faders & Mute
- 17 Channel Meters & Mute
- 17 Select a Show
- 17 Select a Preset
- 17 IP Address
- 17 Setup & Information
- 18 Get out of Jail Free
- 19 High Reliability Options
- 19 Dual Mirrored Hard Disk Drives
- 19 Dual Power Supply and cooling fan
- 19 Bypass
- 20 Software controller
- 20 Overview
- 21 Password Protection
- 22 General Settings and Toolbar Controls
- 23 File management
- 24 Live Control
- 24 Input and output control buttons
- 25 Source Mix
- 26 Input Channel
- 27 Input Equaliser
- 28 Matrix
- 29 Output Channel
- 30 Output Equaliser
- 31 Group Masters
- 32 Programmed Control
- 32 Files
- 33 Show store and recall
- 33 Create New Show Online
- 33 Create New Show Offline
- 33 Open Selected Show on TiMax Disk
- 33 Open Show Online
- 33 Open Show Offline
- 33 Save Show
- 34 Save Show As
- 34 EQ Library
- 35 Routing Library
- 36 Preset store and recall
- 36 Recall Preset
- 36 New Preset
- 36 Update Preset
- 37 System Preset
- 38 Programming Fade in and Fade out Times
- 39 Sound File Playback Commands
- 40 Programming Time of Day Triggers
- 40 Setting Real Time Clock
- 40 MIDI triggers
- 41 Using Multiple Controllers
- 42 Things to do if things go wrong
- 43 S – Version software
- 43 Introduction
- 43 Overview
- 43 File Management
- 43 TimeLine Editor
- 44 Snapshots and TimeLine Cue Co-Existence
- 45 Loading Audio Files
- 47 TimeLine Toolbar
- 47 Common tools
- 47 Audio File Editing
- 48 Looping
- 49 Volume Profiling
- 49 Panning & Image Definitions
- 50 Dynamic Pans
- 50 Changing Pan Law and Timing
- 51 Mono/Stereo
- 51 Spatial Panning Window
- 51 Show Control Triggers
- 51 Midi Triggers
- 52 Clocks
- 52 Show Clock
- 52 Cue Clock
- 53 MTC Out
- 53 MTC In
- 53 Time Linked Cues
- 53 Auditioning
- 55 Appendix
- 55 Image Definition Setup by Measurement and Calculation
- 56 Appendix
- 56 TiMax Tracker hookup and setup
- 58 Appendix
- 58 Sound system design examples
- 58 General principles and concepts
- 60 Typical Signal Flow
- 61 End-on Proscenium Theatre
- 63 Musical Theatre in an Outdoor Arena
- 64 Millitary Tattoo or Pageant
- 65 The odd one
- 66 Appendix
- 66 XML Command set
- 67 Network Security for wireless remote control