advertisement
STOPWATCH
● Two stopwatch displays are available for lap time and split time measurement.
* If the measurement is started or stopped in one display, the other display also starts or stops accordingly. Therefore, you can switch between the LAP TIME and SPLIT TIME displays during the measurement to check the measured times.
[LAP TIME display]
“LAP” mark
Lap time
A
LAP
B
C
1/100
Split No.
1/100
Accumulated elapsed time
D
[SPLIT TIME display]
“SPLIT” mark
Split time
A
B
C
SPLIT 1/100
1/100
D
Lap No.
STOPWATCH display indicator
11
✰ “Lap time” is the time that has elapsed from the start of one stage of an activity to that of the next stage.
“Split time” is the time that has elapsed from the start of an activity to any given stage.
LAP TIME
START
SPLIT TIME
12
STOPWATCH OPERATION
• The stopwatch can measure up to 10 hours in 1/100 second increments.
• Before using the stopwatch, be sure to reset the digits to “00”.
When the stopwatch is stopped, press Button A.
When it is counting, press Button C to stop the measurement and then press
Button A.
A
LAP
D
C
1/100
1/100
1 Standard measurement
D
Press to show the LAP TIME or SPLIT TIME display.
C
START
C
STOP
A
RESET
2 Accumulated elapsed time measurement
D
Press to show the LAP TIME or SPLIT TIME display.
C
START
C
STOP
C
RESTART
○ ○
C
STOP
A
RESET
* Restart and stop of the stopwatch can be repeated by pressing Button C.
13
14
3 Lap time measurement
D
“LAP” mark
Press to show the LAP TIME display.
C
START
A
LAP 1
LAP 1/100 LAP
1/100
1/100
1/100
Lap No.
LAP
A
RESET
1/100
1/100
LAP
A
LAP 2
Lap time
1/100
1/100
Accumulated elapsed time
LAP
C
FINISH
1/100
○ ○ ○ ○
Lap time measurement can be repeated by pressing Button A.
1/100
STOP
Final lap time
4 Split time measurement
D
Press to show the SPLIT TIME display.
C A
“SPLIT” mark
START SPLIT 1
SPLIT 1/100 SPLIT 1/100
1/100 1/100
Split No.
A
SPLIT
RESET
1/100
1/100
A
SPLIT 2
SPLIT
Split time
1/100
1/100
Accumulated elapsed time
C
LAP SPLIT
FINISH
1/100
○ ○ ○ ○
Split time measurement can be repeated by pressing Button A.
1/100
STOP
Total time
15
NOTE
Even while the stopwatch is counting, you can switch from the STOPWATCH display to another by pressing Button D. It continues counting properly up to 10 hours, and the
STOPWATCH display indicator flashes to indicate that the stopwatch is counting.
16
HOW TO USE THE MEMORY FUNCTION
• Up to 30 sets of lap times and split times can be stored and recalled either during or after the measurement.
Memory recall after measurement
A
B
C
LAP
1/100
Lap/split No.
Lap time
1/100
“RECALL” mark
SPLIT
RECALL
Split time
STOP
B
▼
C
OR
A
▼
B
Press in the LAP TIME or SPLIT TIME display to activate the memory recall function.
With each press, the stored data are recalled successively from the oldest to the newest.
With each press, the stored data are recalled successively from the newest to the oldest.
After all the stored data have been recalled, press to return to the LAP TIME or SPLIT TIME display.
* The oldest measurem e n t s t o r e d i n m e m o r y w i l l b e displayed first.
* The stored data can be recalled quickly if the respective buttons are kept pressed.
Memory recall during measurement
A
LAP
Lap/split No.
B
“RECALL” mark
SPLIT
RECALL
1/100
C
1/100
STOP
Lap time
Split time
17
18
B
▼
C
OR
A
▼
B
Press in the LAP TIME or SPLIT TIME display to activate the memory recall function.
With each press, the stored data are recalled successively from the oldest to the newest.
With each press, the stored data are recalled successively from the newest to the oldest.
* The newest measurem e n t s t o r e d i n m e m o r y w i l l b e displayed first.
* The stored data can be recalled quickly if the respective buttons are kept pressed.
After all the stored data have been recalled, press to return to the LAP TIME or SPLIT TIME display.
NOTES
1 If the stopwatch is left untouched in the MEMORY RECALL display with the
STOPWATCH display indicator flashing, it will automatically return to the measurement in progress in 30 seconds.
2 Even if the stopwatch is reset to “00”, stored data are not erased and can be recalled until a new measurement is started in the LAP TIME or SPLIT TIME display.
The “STOP” mark is not shown during memory recall if the stopwatch has been reset to “00”.
3 The display will return to the ALARM if Button D is pressed while using the memory recall function.
advertisement
Related manuals
advertisement