- Computers & electronics
- Computer components
- Chassis components
- Blonder tongue
- DHDP-V 8VSB signal processor
- Specification
advertisement
DHDP Series
Digital HD Processor 1x 8VSB/QAM ► 1x IF ► 1x 8VSB
DHDP (Digital High-Definition Processor) is a two-module system consisting of one down-converter module and one up-converter module. The down-converter accepts one 8VSB (digital off-air) input in the 54-864 MHz range and delivers one output in IF (Intermediate Frequency) format. The up-converter accepts one IF input and delivers one output in 8VSB format.
Features
• Agile Broadcast (UHF, VHF) and CATV (Standard, HRC, and IRC) channel assignments in the 54-864 MHz range
• Compatible with Digital TV and High-Definition TV applications
• Compact design allows for deployment of six Combo modules in 2RU rack space
Ordering Information
DHDC-DV
DHDC-UV
DHDP-V
MIRC-12V
MIPS-12C
DHDP-50
6264A
6265A
6266B
7715
7722C
6260A
Digital TV & High-Definition TV Downconverter module
Digital TV & High-Definition TV Up-Converter module
Combo modules (6264A + 6265A)
Rack Chassis (holds up to 6 combo modules)
110VAC/60 Hz power supply (one per chassis)
Digital TV & High-Definition Integrated Unit (+50 dBmV Output)
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
DHDP Series
Digital HD Processor 1x 8VSB/QAM ► 1x IF ► 1x 8VSB
Specifications
DOWN-CONVERTER
Connectors
8VSB Input: “F” Female
IF Output: “F” Female
Input
Format: 8VSB (ATSC Digital Television A/53E)
Frequency Range: 54-864 MHz (VHF Ch. 2-13, UHF Ch. 14-69)
Operating Level Range: -20 to +25 dBmV
Installation Input Range: -15 to +20 dBmV (any undesired Ch. < +25 dBmV)
Max Undesired to
Desired Ch. Ratio: < +25 dBc
Max Adjacent to
Desired Ch. Ratio: < +15 dBc
Output
Format: IF (Intermediate Frequency)
Frequency: 44 MHz center
Output Level (AGC): +30 dBmV (-20 to +25 dBmV input)
Phase Noise: -90 dBc/Hz (@ 10 kHz offset)
UP-CONVERTER
Connectors
IF Input: “F” Female
RF Output: “F” Female
Input
Format: 8 VSB
Frequency: 44 MHz center (IF - Intermediate Frequency)
Input Level: +30 dBmV
Output
Format: CATV (Standard, IRC, HRC) and
Broadcast (VHF, UHF)
Frequency: 54-864 MHz
Frequency Tolerance: ±5 kHz
Output Level: +45 dBmV
Level Adjust Range: +33 to +47 dBmV
Channel Flatness: 1 dB
Spurious Output: -60 dB (50 to 1000 MHz)
C/N Ratio (In Channel-Digital): -60 dB (5.5 MHz bandwidth; +45 dBmV output)
Broadband Noise: -71 dBc (5.5 MHz BW, +45 dBmV output)
Phase Noise: -95 dBc (@ 10 kHz offset)
Impedance: 75 Ω
Return Loss: 12 dB
GENERAL
Dimensions (W x D x H)
Each Module: 1.15 x 7.5 x 3.5 inches (29 x 191 x 89 mm)
Power Supply: 4.6 x 7.5 x 3.5 inches (106 x 191 x 89 mm)
Rack Chassis: 19.0 x 12.0 x 3.5 inches (483 x 305 x 89 mm)
Power:
Power Dissipation:
MIPS-12C 110 VAC/60 Hz
Down-Converter: 3.2 W
Up-Converter: 5.30 W
Weight
Each Module: 0.8 lbs (0.36 kg)
Fully Loaded Chassis: 20 lbs (9 kg)
Operating Temperature: 32 to 122 °F (0 to 50 °C)
Storage Temperature: -13 to 158 °F (-25 to 70 °C)
Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensation
Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensation
MONITORING / INDICATORS
Down-Converter
Ch. Number: Front-panel; 2-Digit LED Display
Ch. Selection/Activation: Front-panel; Up/Down Push Buttons
Up-Converter
Ch. Number & RF Level: Front-panel; 2-Digit LED Display
+100 Ch. Indicator: Front-panel; LED, Red
Ch. Selection/Activation: Front-panel; Up/Down Push-Buttons
RF Level: Front-panel; Up/Down Push-Buttons
Specifications Subject To Change Without Notice Rev 04-12 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
advertisement