ViewSonic VS12400 User guide

22-Inch Full-HD
LCD Display
- User Guide
- ሢ၊࿁࿳
Model No. : VS12400
ńŰůŵŦůŵŴ
Important Safety Instructions .................................................................................................................................................1
Declaration of RoHS Compliance ..........................................................................................................................................2
Copyright Information...............................................................................................................................................................3
Product Registration ..................................................................................................................................................................3
Antenna Installation Instructions ..........................................................................................................................................4
Cleaning the LCD TV...................................................................................................................................................................4
Overview of the LCD Display ...................................................................................5
Product components .................................................................................................................................................................5
Front view ......................................................................................................................................................................................6
Rear view .......................................................................................................................................................................................7
Remote Control ............................................................................................................................................................................8
Getting started ........................................................................................................... 10
Inserting the remote control batteries .............................................................................................................................10
Connecting power ...................................................................................................................................................................10
Cable Connections...................................................................................................................................................................11
Basic Operation .........................................................................................................................................................................14
Using the OSD Menu ............................................................................................... 16
Picture Adjustment ..................................................................................................................................................................17
Sound Adjustment ...................................................................................................................................................................19
TV Tuner Adjustment ..............................................................................................................................................................21
DTV OSD Functions .................................................................................................................................................................23
PC Setup ....................................................................................................................................................................................28
Setup Adjustment....................................................................................................................................................................29
Using a USB Source..................................................................................................................................................................31
Program Guide ........................................................................................................... 33
Other Information..................................................................................................... 34
Toubleshooting .........................................................................................................................................................................34
Customer Support ...................................................................................................................................................................35
Limited Warranty ......................................................................................................................................................................36
Important Safety Instructions
1.
Read these instructions completely before using the equipment.
2.
Keep these instructions in a safe place.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this equipment near water. Warning: 7RUHGXFHWKHULVNRI¿UHRUHOHFWULFVKRFN
do not expose this apparatus to rain or moisture.
&OHDQZLWKDVRIWGU\FORWK,IIXUWKHUFOHDQLQJLVUHTXLUHGVHH³&OHDQLQJWKH/&'79´LQ
this guide for further instructions.
'
R QRW EORFN DQ\ YHQWLODWLRQ RSHQLQJV ,QVWDOO WKH HTXLSPHQW LQ DFFRUGDQFH ZLWK WKH
manufacturer’s instructions.
'
RQRWLQVWDOOQHDUDQ\KHDWVRXUFHVVXFKDVUDGLDWRUVKHDWUHJLVWHUVVWRYHVRURWKHUGHYLFHV
LQFOXGLQJDPSOL¿HUVWKDWSURGXFHKHDW
9.
Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade and the third prong are provided for
\RXUVDIHW\,IWKHSOXJGRHVQRW¿WLQWR\RXURXWOHWFRQVXOWDQHOHFWULFLDQIRUUHSODFHPHQWRI
the outlet.
URWHFWWKHSRZHUFRUGIURPEHLQJWUHDGXSRQRUSLQFKHGSDUWLFXODUO\DWWKHSOXJDQGWKH
3
point where if emerges from the equipment. Be sure that the power outlet is located near the
equipment so that it is easily accessible.
2QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFL¿HGE\WKHPDQXIDFWXUHU
12.
8VHRQO\ZLWKDFDUWVWDQGWULSRGEUDFNHWRUWDEOHVSHFL¿HGE\WKHPDQXIDFWXUHU
RUVROGZLWKWKHDSSDUDWXV:KHQDFDUWLVXVHGXVHFDXWLRQZKHQPRYLQJWKHFDUW
apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
EHHQGDPDJHGLQDQ\ZD\VXFKDVLIWKHSRZHUVXSSO\FRUGRUSOXJLVGDPDJHGLIOLTXLG
LVVSLOOHGRQWRRUREMHFWVIDOOLQWRWKHXQLWLIWKHXQLWLVH[SRVHGWRUDLQRUPRLVWXUHRULIWKH
unit does not operate normally or has been dropped.
15. This product is only to perform the useful function of entertainment and visual display tasks
are excluded.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
(TXLSPHQW'LUHFWLYH(&:(((
The mark indicates the requirement NOT to dispose the equipment as unsorted
PXQLFLSDOZDVWHEXWXVHWKHUHWXUQDQGFROOHFWLRQV\VWHPVDFFRUGLQJWRORFDOODZ
,IWKHEDWWHULHVDFFXPXODWRUVDQGEXWWRQFHOOVLQFOXGHGZLWKWKLVHTXLSPHQWGLVSOD\WKHFKHPLFDO
V\PERO+J&GRU3EWKHQLWPHDQVWKDWWKHEDWWHU\KDVDKHDY\PHWDOFRQWHQWRIPRUHWKDQ
0HUFXU\RUPRUHWKDQ&DGPLXPRUPRUHWKDQ/HDG
ViewSonic
1
VT2230
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of
the European Parliament and the Council on restriction of the use of certain hazardous substances
LQ HOHFWULFDO DQG HOHFWURQLF HTXLSPHQW 5R+6 'LUHFWLYH DQG LV GHHPHG WR FRPSO\ ZLWK WKH
PD[LPXPFRQFHQWUDWLRQYDOXHVLVVXHGE\WKH(XURSHDQ7HFKQLFDO$GDSWDWLRQ&RPPLWWHH7$&
DVVKRZQEHORZ
Proposed Maximum
Concentration
Actual Concentration
/HDG3E
0.1%
< 0.1%
0HUFXU\+J
0.1%
< 0.1%
&DGPLXP&G
0.01%
< 0.01%
Hexavalent Chromium (Cr6+
0.1%
< 0.1%
3RO\EURPLQDWHGELSKHQ\OV3%%
0.1%
< 0.1%
3RO\EURPLQDWHGGLSKHQ\OHWKHUV3%'(
0.1%
< 0.1%
Substance
Certain components of products as stated above are exempted under the Annex of the RoHS
'LUHFWLYHVDVQRWHGEHORZ
([DPSOHVRIH[HPSWHGFRPSRQHQWVDUH
0HUFXU\LQFRPSDFWÀXRUHVFHQWODPSVQRWH[FHHGLQJPJSHUODPSDQGLQRWKHUODPSVQRW
VSHFL¿FDOO\PHQWLRQHGLQWKH$QQH[RI5R+6'LUHFWLYH
/HDGLQJODVVRIFDWKRGHUD\WXEHVHOHFWURQLFFRPSRQHQWVIOXRUHVFHQWWXEHVDQGHOHFWURQLF
FHUDPLFSDUWVHJSLH]RHOHFWURQLFGHYLFHV
/HDGLQKLJKWHPSHUDWXUHW\SHVROGHUVLHOHDGEDVHGDOOR\VFRQWDLQLQJE\ZHLJKWRUPRUH
OHDG
/HDG DV DQ DOORWWLQJ HOHPHQW LQ VWHHO FRQWDLQLQJ XS WR OHDG E\ ZHLJKW DOXPLQLXP
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
The “HD ready” Logo is a trademark of EICTA.
ViewSonic
2
VT2230
Copyright Information
&RS\ULJKW‹9LHZ6RQLF&RUSRUDWLRQ$OOULJKWVUHVHUYHG
9LHZ6RQLFWKHWKUHHELUGVORJR2Q9LHZ9LHZ0DWFKDQG9LHZ0HWHUDUHUHJLVWHUHGWUDGHPDUNV
RI9LHZ6RQLF&RUSRUDWLRQ
'LVFODLPHU9LHZ6RQLF &RUSRUDWLRQ VKDOO QRW EH OLDEOH IRU WHFKQLFDO RU HGLWRULDO HUURUV RU
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
WKLVPDWHULDORUWKHSHUIRUPDQFHRUXVHRIWKLVSURGXFW
,QWKHLQWHUHVWRIFRQWLQXLQJSURGXFWLPSURYHPHQW9LHZ6RQLF&RUSRUDWLRQUHVHUYHVWKHULJKWWR
FKDQJHSURGXFWVSHFL¿FDWLRQVZLWKRXWQRWLFH,QIRUPDWLRQLQWKLVGRFXPHQWPD\FKDQJHZLWKRXW
notice.
1R SDUW RI WKLV GRFXPHQW PD\ EH FRSLHG UHSURGXFHG RU WUDQVPLWWHG E\ DQ\ PHDQV IRU DQ\
SXUSRVHZLWKRXWSULRUZULWWHQSHUPLVVLRQIURP9LHZ6RQLF&RUSRUDWLRQ
Product Registration
7RPHHW\RXUIXWXUHQHHGVDQGWRUHFHLYHDQ\DGGLWLRQDOSURGXFWLQIRUPDWLRQDVLWEHFRPHV
DYDLODEOHSOHDVHUHJLVWHU\RXUSURGXFWRQWKH,QWHUQHWDWZZZYLHZVRQLFFRP
For Your Records
Product Name:
VT2230-1NT
ViewSonic LCD Display
Model Number:
VS12400-1P
Document Number:
VT2230-1NT_UG_ENG Rev. 1A 11-12-08
Serial Number:
______________________________________
______________________________________
Purchase Date:
Product disposal at end of product life
9LHZ6RQLFLVFRQFHUQHGDERXWWKHSUHVHUYDWLRQRIRXUHQYLURQPHQW3OHDVHGLVSRVHRIWKLVSURGXFW
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with
environmental laws of your location.
ViewSonic
3
VT2230
Antenna Installation Instructions
1. Outdoor Antenna Grounding
,IDQRXWVLGHDQWHQQDRUFDEOHV\VWHPLVFRQQHFWHGWRWKHSURGXFWEHVXUHWKHDQWHQQDRUFDEOHV\VWHP
LVJURXQGHGVRDVWRSURYLGHVRPHSURWHFWLRQDJDLQVWYROWDJHVXUJHVDQGEXLOWXSVWDWLFFKDUJHV$UWLFOH
RI WKH 1DWLRQDO (OHFWULFDO &RGH$16,1)3$ SURYLGHV LQIRUPDWLRQ ZLWK UHJDUG WR SURSHU
JURXQGLQJRIWKHPDVWDQGVXSSRUWLQJVWUXFWXUHJURXQGLQJRIWKHOHDGLQZLUHWRDQDQWHQQDGLVFKDUJH
XQLWFRQQHFWLRQWRJURXQGLQJHOHFWURGHVDQGUHTXLUHPHQWVIRUWKHJURXQGLQJHOHFWURGH
2. Lightning
)RUDGGHGSURWHFWLRQIRUWKLVSURGXFWGXULQJDOLJKWQLQJVWRUPRUZKHQLWLVOHIWXQDWWHQGHGDQGXQXVHG
IRUORQJSHULRGVRIWLPHXQSOXJLWIURPWKHZDOORXWOHWDQGGLVFRQQHFWWKHDQWHQQDRUFDEOHV\VWHP
This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the
antenna or the power cord during a heavy storm lighting may strike while you are holding the cable
FRUGFDXVLQJVHULRXVLQMXU\WXUQRII\RXU/&'79DQGZDLWIRUWKHZHDWKHUWRLPSURYH
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
OLJKWRUSRZHUFLUFXLWVRUZKHUHLWFDQIDOOLQWRVXFKSRZHUOLQHVRUFLUFXLWV:KHQLQVWDOOLQJDQRXWVLGH
DQWHQQDV\VWHPH[WUHPHFDUHVKRXOGEHWDNHQWRNHHSIURPWRXFKLQJVXFKSRZHUOLQHVRUFLUFXLWVDV
contact with them might be fatal.
Antenna
Ground clamp
Antenna discharge unit
Electric service equipment
Ground clamps
Grounding conductors
Power service grounding electrode system
Cleaning the LCD TV
‡ 0DNHVXUHWKH/&'79LVWXUQHGRII
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
:LSHWKHVFUHHQZLWKDFOHDQVRIWOLQWIUHHFORWK7KLVUHPRYHVGXVWDQGRWKHUSDUWLFOHV
,IVWLOOQRWFOHDQDSSO\DVPDOODPRXQWRIQRQDPPRQLDQRQDOFRKROEDVHGJODVVFOHDQHURQWRDFOHDQ
VRIWOLQWIUHHFORWKDQGZLSHWKHVFUHHQ
To clean the case:
8VHDVRIWGU\FORWK
,I VWLOO QRW FOHDQ DSSO\ D VPDOO DPRXQW RI D QRQDPPRQLD QRQDOFRKRO EDVHG PLOG QRQDEUDVLYH
GHWHUJHQWRQWRDFOHDQVRIWOLQWIUHHFORWKWKHQZLSHWKHVXUIDFH
Disclaimer
9LHZ6RQLFGRHVQRWUHFRPPHQGWKHXVHRIDQ\DPPRQLDRUDOFRKROEDVHGFOHDQHUVRQWKH/&'79VFUHHQ
RUFDVH6RPHFKHPLFDOFOHDQHUVKDYHEHHQUHSRUWHGWRGDPDJHWKHVFUHHQDQGRUFDVHRIWKH/&'79
9LHZ6RQLFZLOOQRWEHOLDEOHIRUGDPDJHUHVXOWLQJIURPXVHRIDQ\DPPRQLDRUDOFRKROEDVHGFOHDQHUV
ViewSonic
4
VT2230
Overview of the LCD Display
Congratulation in purchasing the LCD Color Display. This product has been designed to provide you
with a rich audio and video experience. This monitor enables you to watch broadcast or cable television
,channels, connect VCR, VCD or DVD player to watch your favorites movies, or connect a computer to
use the display as a monitor. The LCD Display is equipped with convenient control buttons located on the
front panel and a handy remote control to let you adjust the setting and customize the preferences through
an easy-to -use on screen menu system.
Enjoy the versatility of your LCD Display with its wide variety of features:
Color active matrix TFT LCD Display with remote control
Safe, sturdy construction
21.6 inches: Contrast ratio-1000: 1 and Brightness-300 cd/m2
5HVSRQVHWLPH7JPV7\S
Maximum display resolution: 1920 x 1080
Audio / Video support
• HDMI analog audio input
• &RPSRQHQW<&E&U<3E3UYLGHRLQSXW
• S-Video input
• AV input
• Composite video input
• Composite audio input
• YPbPr video input
• VGA input
• PC audio in
• USB input
2Q6FUHHQ'LVSOD\26'PHQXV\VWHP
Product components
The following section describes the various components of the LCD Display. Please take a few moments
to familiarize yourself with the product and control panel before using it .
When you unpack this LCD Display, please make sure the box contains the following items:
• LCD Color Display
• Power Cord
• 5HPRWH&RQWUROZLWK$$$EDWWHULHV
• User Manual
• Warranty Card
* If any of these items were missing or damaging, please contact service party for assistance.
ViewSonic
5
VT2230-NT
Front view
Power Indicator LED
1 SOURCE
Switch among the input source.
2 MENU
3UHVVWKHEXWWRQWRHQWHU2Q6FUHHQ'LVSOD\26'
3 VOL +/-
䔌ܹ⑤
䙌ஂ
Increase or decrease the volume.
1
2
䷇䞣
4 CH S/T
䷇䞣
3
Increase or decrease channel number.
䙌ৄ
䙌ৄ
4
Power indicator LED indicates if the LCD power is turned
on (blue) or in stand-by state (orange).
ViewSonic
6
VT2230-NT
Rear view
11
12
13
䔌ܹ⑤
䙌
䷇䞣
䷇䞣
䙌ৄ
䙌ৄ
1
NO
2
3
4 5
6
7 8 9 10
ITEM
FUNCTION
1
AC-IN
Connect to the AC outlet.
2
HDMI IN
Connect to the HDMI output of your PC or portable computer or
A/V device.
3
PC -IN
Connect to the VGA output of your PC or portable computer.
4
PC AUDIO IN
Connect to the audio output of your computer.
5
AUDIO OUT
Connect to the audio input jack of your Audio device.
6
COMPONENT IN
7
COMPONENT AUDIO IN
8
AV AUDIO IN
Connect to the A/V output jack of your A/V device.
9
S-VIDEO IN
Connect to the S-Video output jack of your S-Video device.
AV IN
Connect to the A/V output jack of your A/V device.
ANTENNA/TV MODULE
CONNECTORS
Connect to the ATV signal and DTV signal.
USB
Connect a USB source.
10
11
12
13
Connect to the component output jack of your component device.
ViewSonic
7
VT2230-NT
Remote Control
1 Ⴋྛ POWER
Turn power ON or OFF.
2 COLOR KEYS
1
Context sensitive OSD hotkeys.
3 SOURCE HOTKEYS
2
Press the hotkeys to select the input source.
Press DTV once for DTV source; press twice to enter
digital radio.
3
4 ঝ๖ FREEZE
Freeze the present image on the screen.
5 ӱඈ RETURN
Switch to the previous viewed channel.
6 ᚔ໠ EXIT
Exit OSD menus.
4
5
7 OSD MENU UP/FAST FORWARD
Move up in OSD menus/fast forward media.
6
7
8 OSD MENU RIGHT/SKIP FORWARD
Move right in OSD menus/skip to next media.
8
9 ጂᇯ ENTER/PLAY
9
Enter the selected OSD item/Play media.
10
10 ҬᓃġMENU
11
Press to enter current source OSD Menu.
11 ᡗҰ DISPLAY
12
Press to display the information of input signal.
12 ॱ໔ +/- VOL+/-
13
Increase + or decreases - the volume.
14
13 ᓗॱ MUTE
15
Disable the audio output.
16
14 MEDIA CONTROL KEYS
Play/Pause/Stop/Rotate/Repeat current media.
ViewSonic
®
15 ॱਝ SOUND MODE
Select the desired Sound Mode.
16 ᆃ઎ SLEEP TIMER
Press repeatedly to set the sleep timer from 15 to 60 mins.
ViewSonic
8
VT2230-NT
17 ଉဴྛ SOURCE
Select the video source signal.
18 ኵԅᗤ NUMBER KEYS
17
Press the number keys to enter channel numbers.
19 ቶᒉᄍ WIDE
Switch the display mode between various wide modes.
20 OSD MENU LEFT/SKIP BACKWARD
Move left in OSD menus/skip to previous media
21 *8,'(21/<,1'7926'0(18
Enter the program guide of DTV OSD.
18
22 OSD MENU DOWN/REWIND
Move down in OSD menus/rewind media.
23 ᒵᓜ CHANNEL ST
Press the S or T keys to increase or decrease the
channel number.
24 ኇ჋ PICTURE MODE
19
Switch among four picture modes to change the picture
quality : USER, STANDARD, VIVID, SOFT.
25 ᚖᇭ MTS
20
Switch between monaural, stereo, and audio modes.
This function enable you to receive a second language or
unrelated audio.
21
22
23
24
25
ViewSonic
®
ViewSonic
9
VT2230-NT
Getting started
3OHDVHUHIHUWRWKHIROORZLQJVHFWLRQVIRUGHWDLOHGLQVWUXFWLRQVDERXWFRQQHFWLQJWKHDXGLRYLGHR$9
device of your LCD Display and view your favorite programmes or movies .These sections describe the
basic procedures required to set up your Display for easy and convenient viewing.
Inserting the remote control batteries
Insert the two AAA batteries provided into the remote control as described below:
1.
Pull the latch on the battery compartment cover on the rear of the remote control and remove the
cover.
2.
Insert the two supplied AAA batteries .Check the + and - ends of the batteries before inserting them
in the compartment.
3.
Replace the cover and make sure it snaps securely back into place.
(A)
(A)
(B)
1
(B)
2
3
• Do not mix old and new batteries or batteries of different types together.
• 'RQRWVKRUWFLUFXLWGLVDVVHPEOHKHDWRU¿UHEDWWHULHV
• Remove the batteries to avoid damage from possible battery leakage if you anticipate that the remote
control will not be used for an extended period of time.
• Please handle the remote control with care. Avoid dropping it ,getting it wet ,or placing it in direct
sunlight, near a heater or in an area of high humidity.
Connecting power
1.
Connect the supplied power cord to the AC IN jack on the rear of Display.
2.
&RQQHFWWKHRWKHUHQGRIWKHSRZHUFRUGWRDSRZHURXWOHW$&9+]
ViewSonic
10
VT2230-NT
Cable Connections
PC Connector
VGA
DVI
Supported Resolutions
Standard
Resolution
Hor.
Total
Hor.
Freq.
(KHz)
DOS
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
720x400@70Hz
640x480@60Hz
640x480@75Hz
800x600@60Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@75Hz
1280x1024@60Hz
[#+]5
900
800
840
1056
1056
1152
1344
1312
1688
2080
31.47
31.46
37.50
37.87
46.87
48.943
48.36
60.02
63.98
66.587
Hor.
Ver. Ver. Freq. Ver.
Priority Total
(Hz)
Priority
449
525
500
628
625
667
806
800
1066
1111
70.09
59.95
75.00
60.31
75.00
74.836
60.00
75.02
60.02
59.934
Pixel
Clock
(MHz)
28.32
25.17
31.50
40.00
49.50
57.283
65.00
78.75
108.00
138.50
(R) = Reduced Blinking mode (CV-RBT)
ViewSonic
11
VT2230-NT
Other Connections
1
1
2
2
3
4 5
HDMI
Connect to devices with HDMI output such as Blu-ray
players, DVD players, Cable boxes, VCR / VCD players, PCs, and portable PCs.
Audio cable
Connect to devices with audio output such as DVD recorders, VCRs, and Home theater audio equipment.
3
Component cable
Connect to devices such as DVD players, Digital TV
receivers, and Digital satellite receivers.
4
A/V connector
Connect to devices with A/V output such as VCRs,
VCD players, and DVD players.
5
S-video cable
Connect to devices with S-video output such as DVD
players, Digital cameras, and satellite receivers.
ViewSonic
12
VT2230-NT
Notes:
Refer to these notes before connecting any audio / video equipment to this Display:
• Refer to the manuals of your Display, stereo, or other equipment.
• Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only
after you have completed connecting everything. Never make or change connections when equipment
still connected to a power outlet.
• Connect DVD player directly to the Display. For example, do not connect DVD player to VCR and
then connect the VCR to your Display. This type of connection could distort both the picture and the
sound. Your VCR might have a copy protection system which could distorted the DVD image.
• Set the stereo system to the correct channel or source if your video equipment is also connected to a
stereo system.
• You only need one audio connection and one video connection between your Display and other audio/
YLGHRHTXLSPHQWVXFKDV'9'SOD\HU9&5&DPFRUGHU7KLVPHDQVLWLVSRVVLEOH\RXZLOOQRWXVH
all the jacks on the Display.
• If you plan to watch Display via your DVD player or VCR, connect a coaxial cable to the DVD
player’s or VCR’s TUNER IN jack then connect to the antenna jack on your LCD Display. This allows
you to watch channels on the Display normally when the DVD player or VCR is off.
• The function of your existing audio/video equipment, governing the connection mode between your
Display and existing audio/video equipment. Progressive Scan Component Video and Component
Video have the highest picture quality but it can only be used if the connected video equipment
supports Progressive Scan Component Video or component video. S-Video provides a high signal
TXDOLW\ &RPSRVLWH 9LGHR D \HOORZ 9LGHR MDFN SURYLGHV D JRRG YLGHR RXWSXW 3OHDVH IROORZ WKH
correct step to connect existing audio/video equipment.
ViewSonic
13
VT2230-NT
Basic Operation
䔌ܹ⑤
1
5
Turn the LCD Display ON
Press the POWER key to turn on or off the power of the LCD Display. The indicate light is blue
as power ON and orange as power OFF.
䙌ஂ
䷇䞣
2
3
䷇䞣
Press ᒵѮŸźRUᒵᓜŸźNH\WRLQFUHDVHRU
decrease the channel number.
䙌ৄ
3
2
䙌ৄ
Select Channel
Adjust Volume
Press ॱ໔NH\WRLQFUHDVHRUGHFUHDVH
the volume.
5
1
4
Press ᓗॱ key to disable the audio output.
5
5
Mute
Switch the input source
Press ᒯΣྛ or ଉဴྛ key to list input source.
Press ST key to choose the input source, select
and switch the wanted input source.
Press ጂᇯ PLAY to adjust.
5
Use the Source Hotkeys to select the input
source directly.
Press DTV once for DTV source, press twice to
enter digital radio.
2
3
4
ViewSonic
®
ViewSonic
14
VT2230-NT
6
MTS
Press ᚖᇭ key to switch monaural and stereo
modes. This function enable you to receive a
second language or unrelated audio.
7
WIDE
Press ቶᒉᄍ key repeatedly to switch the display modes: 16:9, 4:3, Full, Panorama, Crop,
Standard.
Only DTV and PC Modes support changes to
aspect ratio.
8
SLEEP TIMER
Press ᆃ઎ repeatedly to set the sleep timer from
15 to 60 mins.
9
Sound Mode
Press ॱਝ key repeatedly to select sound
mode.
7
10
Display
Press ᡗҰ key to display channel number (in
79PRGHDQGLQIRUPDWLRQRIRXSXWVLJQDO
10
6
8
9
ViewSonic
®
ViewSonic
15
VT2230-NT
Using the OSD Menu
7KH2Q6FUHHQ'LVSOD\26'PHQXV\VWHPSURYLGHVDTXLFNDQGVLPSOHPHWKRGWRDGMXVW/&''LVSOD\
base setting. OSD menu can be viewed using both the remote control and the control buttons on the
control panel.
1 Press ᒵ൐ key on the control panel or Ҭᓃ key on the remote control to view OSD menu.
2 Press ST key to select the function.
3 Press X key to enter the sub menu.
4 Press ST key to select the item and press WX to adjust.
5 Press key on the control panel or key on the remote control to exit OSD menu.
After change settings on the OSD menu, the new settings are confirmed automatically
when OSD picture vanish, even did not press the menu to exit the OSD system.
ViewSonic
16
VT2230-NT
Picture Adjustment
The Picture adjustment enable you to
adjust Brightness, Contrast, Sharpness,
Color, Hue, Color Temp, and Dynamic
Contrast.
1
2
3
Press ᒵ൐ key on the control panel or Ҭᓃ key on the
remote control to view OSD menu.
Press ST key to select [Picture] mode.
Press WXRUNH\WRVHOHFW3LFWXUH0RGHLWHP
Press WX or +/- key to select User, Standard, Vivid,
Soft.
In preset Picture Modes, it is allowed to adjust each subpicture-item setting. Press ST
key to select item and press WX key or +/- key to adjust setting.
ViewSonic
17
VT2230-NT
4
Press ᒵ൐ key on the control panel or Ҭᓃ key on
the remote control to exit OSD menu.
%ULJKWQHVV DGMXVWPHQW $GMXVW WKH
levels of light on your screen. It should
be used in conjunction with the contrast option.
&RQWUDVW DGMXVWPHQW $GMXVW WKH GLIference between the dark and light
level on your screen.
6KDUSQHVV DGMXVWPHQW $GMXVW WKH
sharpness level on your screen.
&RORU DGMXVWPHQW FKDQJH WKH GRPLnant color intensity on your screen.
Adjust this setting until the colors on
the screen look natural.
+XH DGMXVWPHQW &KDQJH WKH FRORU
balance. Adjust this setting so that colors on the screen are neither too green
or too magenta.
(No support in PC mode)
&RORU 7HPSHUDWXUH DGMXVWPHQW $Gjust the image color intensity:
Standard, Cool, Warm
'\QDPLF&RQWUDVWWXUQRQRIRIIDXWR
contrast adjustment.
1RVXSSRUWLQ3&PRGH
ViewSonic
18
VT2230-NT
Sound Adjustment
The Sound adjustment enable user to
adjust volume, treble, bass, balance,
speaker output and surround setting.
1
2
3
Press ᒵ൐ key on the control panel or Ҭᓃ key on the
remote control to view OSD menu.
Press ST key to select [Sound] mode.
Press WX or +/- key to enter sub-menu.
Press WXNH\WRVHOHFW6RXQG0RGH
In preset Audio Modes, it is allowed to adjust each subaudio-item setting. Press ST key to
select item and press WX key or +/- key to adjust setting.
ViewSonic
19
VT2230-NT
4
5
Press WX or +/- key to select Standard, Music,
Movie, Speech, User.
Press ᒵ൐ key on the control panel or Ҭᓃ key on
the remote control to exit OSD menu.
7UHEOH DGMXVWPHQW $GMXVW WKH KLJK
frequency content in audio output.
%DVVDGMXVWPHQW$GMXVWWKHORZIUHquency content in audio output.
%DODQFHDGMXVWPHQW%DODQFHWKHYROume of right and left speakers.
$9&WXUQ$XWR9ROXPH&RQWURO2Q
or Off
ViewSonic
20
VT2230-NT
TV Tuner Adjustment
• The Tuner Adjustment enable user to
adjust the setting of tuner function.
• Tuner Adjustment only can be
operated in TV mode.
1
2
3
4
ViewSonic
Press ᒵ൐ key on the control panel or Ҭᓃ key on the
remote control to view OSD menu.
Press ST key to select [Channel] mode.
Press WX or +/- key to enter sub-menu.
Press STNH\WRVHOHFW&KDQQHO
Press WX key to search Channels manually.
Press STNH\WRVHOHFW&$79$LUDQGSUHVVX to set
the channel signal system for Air or Cable.
21
VT2230-NT
5
6
7
ViewSonic
Press STNH\WRVHOHFW$XWR6HDUFKLWHPDQGSUHVV
X to start scaning channels.
Press STNH\WRVHOHFW6NLSLWHPDQGSUHVVX to skip
channels where no signal is detected.
Press ᒵ൐ key on the control panel or Ҭᓃ key on
the remote control to exit OSD menu.
22
VT2230-NT
DTV OSD Functions
7KH'7926'2Q6FUHHQ'LVSOD\PHQXSUHVHQWXVHUDFRQVLVWHQWORRNDQGIHHOWKURXJKRXW8VHUFDQ
adjust the DTV channel system setting in this menu.
First time enter DTV OSD, the DTV channel system will be automatically search all
channels.
Press ᒵ൐ key on the control panel or Ҭᓃ key on the remote control to view OSD menu.
Press ST key to select [DTV] mode then press WX or +/- key to enter sub-menu (make sure the input
VRXUFHLVLQ'79PRGH
DTV OSD MENU includes these main options:
•
•
•
•
•
Channel Management
Auto Search
Manual Search
Time
Version
ViewSonic
23
VT2230-NT
DTV Channel Management
1
2
3
Press STNH\WRVHOHFW&KDQQHO0DQDJHPHQW
Press X key to enter the Channel Manager submenu.
Press STNH\WRVHOHFW&KDQQHO2UJDQL]HU
Press X to enter the Channel Organizer screen.
Select a channel using ST keys and use the colored
buttons on the remote control to organize the listed
channels:
• Press [Red] to set the selected channel as a Favorite.
• Press [Green] to Delete the selected channel.
• Press [Yellow] to Skip the selected channel.
• Press [Blue] to enter a password to lock the selected
channel.
Press STNH\WRVHOHFW&KDQQHO6RUWLQJ
Press X to enter the Channel Sorting screen.
Press WXST and [PLAY] to set your preferences for
sorting channels using the three Options provided:
• Sort by Status—All, Free, or Scrambled.
• Sort Alphabetically— All, A to Z, or Z to A.
Select All to display all available channels.
ViewSonic
24
VT2230-NT
4
Press STNH\WRVHOHFW&KDQQHO*URXSLQJ
Press X to enter the Channel Grouping screen.
Select a channel using ST keys and add the channel
to groups by pressing the corresponding numeric key
on the remote.
For example, select channel 02 and press [2] on the
remote to add channel 02 to the News group.
3UHVV>3/$<@WRFRQ¿UPWKHJURXSLQJ
5
Press STNH\WRVHOHFW'HOHWH$OO79&KDQQHOVRU
'HOHWH$OO5DGLR&KDQQHOV
Press XWRHQWHUDFRQ¿UPDWLRQPHVVDJHVFUHHQ
3UHVV>3/$<@WRFRQ¿UPWKH'HOHWLRQ
6
ViewSonic
Press ᒵ൐ key on the control panel or Ҭᓃ key on
the remote control to exit OSD menu.
25
VT2230-NT
DTV Functions
1
2
3
ViewSonic
Press STNH\WRVHOHFW$XWR6HDUFKLWHPDQGSUHVV
X to start scaning channels.
Discovered TV and Radio channels are displayed in the
corresponding panels.
Press STNH\WRVHOHFW0DQXDO6HDUFK
Press X key to enter the Manual Search screen.
Press WX to select a channel to scan. The signal
strength and quality are displayed at the bottom of the
screen.
Press [PLAY] to add the selected channel to the channel list.
Press STNH\WRVHOHFW7LPH
Press X key to enter the Time screen.
26
VT2230-NT
Press WX to select Auto or Manual:
Auto—automatically adjusts the date and time.
Manual—enter the date and time manually using the
Calender screen.
4
• Press [Red] to set the Year.
• Press [Green] to set the Month.
• Press [Yellow] to set the Day.
3UHVV>3/$<@WRFRQ¿UP
Enter the Time using STWX and press [PLAY] to
FRQ¿UP
Press STNH\WRVHOHFW9HUVLRQ
7KH 9HUVLRQ ¿HOG LV GLVSOD\ RQO\ \RX FDQQRW PDNH
changes to the Version displayed.
5
ViewSonic
Press ᒵ൐ key on the control panel or Ҭᓃ key on
the remote control to exit OSD menu.
27
VT2230-NT
PC Setup
The PC Setup adjustment enable you
to adjust PC mode settings: Auto Adjust, H Position, V Position, Phase, and
Clock (make sure the input source is in
3&PRGH
1
2
3
4
Press ᒵ൐ key on the control panel or Ҭᓃ key on the
remote control to view OSD menu.
Press ST key to select [PC Setup] mode.
Press WX or +/- key to enter sub-menu.
Press STNH\WRVHOHFW$XWR$GMXVW
Press X key to auto adjust screen to the best position.
Press ST key to select PC Setup parameters.
Press WX key to adjust screen to the best position:
•
•
•
•
ViewSonic
H Position—adjust the horizontal position of the screen.
V Position—adjust the vertical position of the screen.
Phase—adjust phase for the display.
Clock—adjust the clock frequency of display.
28
VT2230-NT
Setup Adjustment
• The setup Adjustment enable you to
adjust OSD Language, OSD Time,
Aspect, Background, and Backlight.
• User can reset all OSD setting in this
option.
1
2
3
4
ViewSonic
Press ᒵ൐ key on the control panel or Ҭᓃ key on the
remote control to view OSD menu.
Press ST key to select [Setup] mode.
Press WX or +/- key to enter sub-menu.
Press STNH\WRVHOHFW/DQJXDJH
Press WX key to select English or Traditional Chinese.
Press STNH\WRVHOHFW5HVHW
Press X key to Restore to the factory original setting.
6HOHFW<HVDQGSUHVV>3/$<@WRFRQ¿UP
29
VT2230-NT
Aspect Ratio
Auto—automatically selects the best
aspect ratio for the input source.
16:9—A wide-screen aspect ratio for
video.
4:3
6WDQGDUG79VFUHHQSURSRUWLRQDOly four units wide for every three units
high, no matter the size of the screen.
5
Press STNH\WRVHOHFW$VSHFW
Press WX key or +/- to switch image size:
16:9, 4:3, Full, Panorama, Crop, or Standard.
6
Press STNH\WRVHOHFW%DFNJURXQG
Press WX key to turn on the optional blue background.
Only TV Mode supports the Background
function.
Panorama
Non-linear stretch right and left.
7
Press STNH\WRVHOHFW%DFNOLJKW
Press WX key to increase or decrease the brightness of
the backlight.
Crop
Vertically expanded, linearly 13%.
ViewSonic
30
VT2230-NT
Using a USB Source
,QVHUWD86%NH\FRQWDLQLQJYDOLG¿OHIRUPDWVLQWRWKHVORWRQWKHGLVSOD\DQGSUHVVᒯΣྛ on the control
SDQHORU>86%@RQWKHUHPRWHFRQWUROWRVHOHFW86%VRXUFH
Supported File Formats
PHOTO
VIDEO
AUDIO
Device
File System
ViewSonic
JPEG
File types: *.JPG
&RPSDWLEOH)LOH)RUPDW-3(*%DVHOLQH
Maximum Resolution: 4992 x 3328 pixels
BMP
File types: *.BMP
Compatible File Format: MS Windows V3.1/4/8/24 uncompressed
Bitmap
Maximum Resolution: 1440 x 1024 pixels
GIF
Not supported
MPEG-1
File Type: *.MPG & *.DAT
Compatible File Format: Video is MPEG-1 and MPEG-2; Audio is
MPEG-2
MP3, layer 1, 2 and 3
MPEG-2 MP@ML ; File type: *.VOB
MPEG-4
File Type: *.AVI
Compatible File Format: Video is MPEG-4; Audio is MP3, Xvid
VLPSOHSUR¿OHW\SHRQO\DQGLY[VLPSOHSUR¿OHW\SHRQO\9LGHR
UHVROXWLRQ S6' ISV 176& S 6' ISV 3$/
Doesn’t support DivX , M-JPEG
MP3
File types: *.MP3 32 kbit/s, 44.1 KHz; 40 kbit/s, 44.1 KHz;
48 kbit/s, 44.1 KHz; 56 kbit/s, 44.1 KHz; 64 kbit/s, 44.1 KHz;
80 kbit/s, 44.1 KHz; 96 kbit/s, 44.1 KHz; 112 kbit/s, 44.1 KHz;
128 kbit/s, 44.1 KHz; 192 kbit/s, 44.1 KHz; 224 kbit/s, 44.1 KHz;
256 kbit/s, 44.1 KHz; 320 kbit/s, 44.1 KHz
WAV
File types: *.WAV
WMA, AC3
Not supported
Other
Photo + Background Music mode not supported
USB host 2.0 is compatible with USB 1.1
'RHVQ¶WVXSSRUW86%FDUGUHDGHU86%+XE86%27*2Q7KH*R
6XSSRUW)$7)$7¿OHV\VWHP
Can be divided up to four partition
0D[LPXP¿OHVL]HLVUHVWULFWHGWR*%LQWKH)$7DQG)$7¿OHV\VWHP
0D[LPXPSDUWLWLRQVL]HLVUHVWULFWHGWR*%LQWKH)$7¿OHV\VWHP
0D[LPXPSDUWLWLRQVL]HLVUHVWULFWHGWR*%LQWKH)$7¿OHV\VWHP
31
VT2230-NT
Select a media type using the colored buttons on the remote control:
• 3UHVV>5HG@WRSOD\0RYLH¿OHV
• Press [Green] to SOD\0XVLF¿OHV
• Press [Yellow] to view 3KRWR¿OHV
Although all media formats are shown in all media modes, only media associated with the
selected mode can be played. For example, Music files such as .MP3s cannot be played in
Movie mode.
Press the STNH\VWRPRYHEHWZHHQIROGHUVDQG¿OHVRQWKHFXUUHQWVFUHHQDQGWX to select items.
Press X to play the selected media.
ViewSonic
32
VT2230-NT
Program Guide
Press [GUIDE] key on the remote control and wait for few seconds, LCD Display will
show the program guide subpage.
The Program Guide can be devided into 6 parts:
'DWHDQGWLPH6KRZWKHFXUUHQWGDWHDQGWLPHE\GD\PRQWK\HDU''00<<<<
2. Time range: EPG can show program list within 2 hour range. Current program will be shown in the
¿UVWEORFN
3. Channel menu: Shows all channel name .
4. Program List: Descend the manifestation program name in time zone according to the program
length.
5. Program time and name: Display the program time and full name.
6. Program account: This block will present more detail information if any.
The following keys are relevant to the operation:
STWX keys: browse the programs
ጂᇯ/PLAY key: select and change the program
S ᒵᓜ T key: page up or down
ViewSonic
33
VT2230-NT
Other Information
Toubleshooting
No power
• Make sure the Display and the power cord are connected correctly.
• Check if you pressed POWER on the remote control unit. If the indicator in the front panel is red, press
POWER in the remote control or the front control panel.
No picture
• Connect to local CATV system equipment, and make sure the signal is unlocked.
• Make sure the Display and the Audio/Video signal input devices are connected correctly.
• In PC/HDMI Mode, after 15 seconds no signal input that screen will auto off.
Strange color, light color, or color misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting.
No sound
• Make sure the Mute function is not operated.
• :KHQVLJQDOSDVVHGE\WKH+'0,GLVWULEXWLRQDPSOL¿HUWKDWPD\UHVXOWLQWKLVVLWXDWLRQ
Remote control unit does not operate
•
•
•
•
•
&KHFNLIWKHEDWWHULHVDUHLQVHUWHGZLWKWKHSRODULW\FRUUHFWO\DOLJQHG
Check if the batteries are discharged. Please replace with new batteries.
0DNHVXUHWKDW\RXGRQRWXVHWKHUHPRWHFRQWUROXQGHUVWURQJRUÀXRUHVFHQWOLJKWLQJ
&KHFNLIWKHUHLVDÀXRUHVFHQWOLJKWLOOXPLQDWHGQHDUWKHUHPRWHFRQWUROVHQVRU
The path of the remote control beam may be blocked; please make sure the path is clear and that
remote control is aimed at the remote control sensor in the Display.
Power is cut off suddenly
• Check if the off timer or sleep timer are set.
• The unit’s internal temperature has increased. Remove any objects blocking the vents and clean them
to remove dust.
Picture is cut off /with side bar screen
• Check if the image position is correct.
• Check if the screen mode adjustments such as picture size are made correctly.
LCD Display does not operate
([WHUQDO LQÀXHQFHV VXFK DV OLJKWQLQJ RU VWDWLF HOHFWULFLW\ PD\ FDXVH LPSURSHU RSHUDWLRQ ,Q WKLV FDVH
RSHUDWHWKHXQLWDIWHU¿UVWWXUQLQJRQWKHSRZHURUSOXJJLQJWKH$&FRUGDQGSOXJJLQJLWLQDJDLQDIWHU
to 2 minutes.
ViewSonic
34
VT2230-NT
Customer Support
For technical support or product service, see the table below or contact your reseller.
You will need the product serial number.
Country/
Website
Region
Taiwan
www.viewsonic.com.tw
T=Telephone
E-mail
F= Fax
T=886 2 2246 3456
F=886 2 2249 1751
[email protected]
Toll Free=0800 061 198
Hong Kong www.hk.viewsonic.com/support/ T= 852 3102 2900
ViewSonic
35
[email protected]
VT2230-NT
Limited Warranty
VIEWSONIC® LCD Display
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If
a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
9LHZ6RQLF/&'79VDUHZDUUDQWHGIRU\HDUIRUDOOSDUWVH[FOXGLQJWKHOLJKWVRXUFHDQG\HDUIRUODERUIURPWKHGDWHRIWKH¿UVW
customer purchase.
Who the warranty protects:
7KLVZDUUDQW\LVYDOLGRQO\IRUWKH¿UVWFRQVXPHUSXUFKDVHU
What the warranty does not cover:
$Q\SURGXFWRQZKLFKWKHVHULDOQXPEHUKDVEHHQGHIDFHGPRGL¿HGRUUHPRYHG
2. Damage, deterioration or malfunction resulting from:
D$FFLGHQWPLVXVHQHJOHFW¿UHZDWHUOLJKWQLQJRURWKHUDFWVRIQDWXUHXQDXWKRUL]HGSURGXFWPRGL¿FDWLRQRUIDLOXUHWRIROORZ
instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
H&DXVHVH[WHUQDOWRWKHSURGXFWVXFKDVHOHFWULFSRZHUÀXFWXDWLRQVRUIDLOXUH
I8VHRIVXSSOLHVRUSDUWVQRWPHHWLQJ9LHZ6RQLF¶VVSHFL¿FDWLRQV
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
4. Removal, installation, and set-up service charges.
5. When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
E:KHQWKHSURGXFWLVPRXQWHGRQWKHZDOOKROHVDQG¿[HGVFUHZVZLOOUHPDLQLQWKHZDOOERG\
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer Support
SDJH<RXZLOOQHHGWRSURYLGH\RXUSURGXFW¶VVHULDOQXPEHU
7RREWDLQZDUUDQWHGVHUYLFH\RXZLOOEHUHTXLUHGWRSURYLGHDWKHRULJLQDOGDWHGVDOHVVOLSE\RXUQDPHF\RXUDGGUHVV
GDGHVFULSWLRQRIWKHSUREOHPDQGHWKHVHULDOQXPEHURIWKHSURGXFW
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of
PHUFKDQWDELOLW\DQG¿WQHVVIRUDSDUWLFXODUSXUSRVH
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss
RIWLPHORVVRISUR¿WVORVVRIEXVLQHVVRSSRUWXQLW\ORVVRIJRRGZLOOLQWHUIHUHQFHZLWKEXVLQHVVUHODWLRQVKLSVRURWKHUFRPPHUFLDO
loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
7KLVZDUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWVZKLFKYDU\IURPVWDWHWRVWDWH6RPHVWDWHVGRQRWDOORZ
limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations
and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local
ViewSonic dealer.
7KHZDUUDQW\SHULRGIRUWKLVSURGXFWLQPDLQODQG&KLQD+RQJ.RQJ0DFDRDQG7DLZDQ([FOXGHGLVVXEMHFWWRWKHWHUPVDQGFRQGLtions of the Maintenance Guarantee Card.
For users in Europe and Russia, full details of warranty providedcan be found in www.viewsoniceurope.com under Support/Warranty
Information.
ViewSonic
36
VT2230-NT
">