Quick Installation Guide
DIR-620
Multifunction Wireless Router
Supporting WiMAX, 3G GSM/CDMA with Built-in Switch
DIR-620 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
• Wireless router DIR-620
• Power adapter
• Straight-through Ethernet cable (CAT 5E)
• CD-ROM with “User Manual” and “Quick Installation Guide”
• “Quick Installation Guide” (brochure)
If any of the items are missing, please contact your reseller.
!
Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Default Settings
IP address of wireless router 192.168.0.1
Username (login) admin
Password admin
Name of wireless network (SSID) DIR-620
2
DIR-620 Quick Installation Guide
System Requirements and Equipment
• A computer with any operating system that supports a web browser.
• A web browser to access the web-based interface of the router: Windows
Internet Explorer, Mozilla Firefox, or Opera.
• A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
!
!
• An 802.11b, g, or n Wi-Fi adapter to create a wireless network.
•
A USB modem to connect to the Internet 1 .
◦ A WiMAX USB modem to connect to the Internet via a WiMAX network.
Some WiMAX operators require subscribers to activate their WiMAX
USB modems prior to using them. Please, refer to connection guidelines provided by your operator when concluding the agreement or placed on its website.
◦ A 3G USB modem to connect to the Internet via a 3G GSM or
CDMA network.
Your USB modem should be equipped with an active identification card (SIM or R-UIM) of your operator.
It is recommended to disable the PIN code check on the identification card prior to connecting the USB modem to the router.
1 Contact your operator to get information on the service coverage and fees.
3
DIR-620
Supported USB Modems
GSM modems
• Huawei E150
• Huawei E1550
• Huawei E160G
• Huawei E169G
• Huawei E220
• ZTE MF626
• ZTE MF627.
CDMA modems
• Anydata ADU-500A
• Celot CT-650.
WiMAX modem
• Samsung SWC-U200.
Quick Installation Guide
4
DIR-620 Quick Installation Guide
CONNECTING TO PC (OS WINDOWS XP)
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
!
3. To connect via a WiMAX, 3G GSM or CDMA network: connect your
USB modem to the USB port 2 located on the front panel of the router.
If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router.
4. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
5. Turn on your PC and wait until your operating system is completely loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2 It is recommended to a USB extension cable to connect a USB modem to the router.
5
DIR-620 Quick Installation Guide
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu displayed.
3. In the Local Area Connection Properties window, on the General tab, in the This connection uses the following items section, select the Internet Protocol (TCP/IP) line. Click the Properties button.
6
DIR-620 Quick Installation Guide
4. Select the Obtain an IP address automatically radio button. Click the OK button.
Click the ОК button. Now your computer is configured to obtain an IP address automatically.
PC with Wi-Fi Adapter
1. To connect via a WiMAX, 3G GSM or CDMA network: connect your
USB modem to the USB port 3 located on the front panel of the router.
!
If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router.
2. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
3 It is recommended to a USB extension cable to connect a USB modem to the router.
7
DIR-620 Quick Installation Guide
3. Turn on your PC and wait until your operating system is completely loaded.
4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to your PC documents). If your PC is equipped with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. Select the icon of the wireless connection and make sure that your Wi-Fi adapter is on.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the needed wireless network (DIR-620) and click the Connect button.
After that the Wireless Network Connection Status window appears.
8
DIR-620 Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is specified: 192.168.0.1). Press the Enter key.
3. On the opened page, enter the username (login) and password for the administrator account (by default, the following username and password are specified: admin, admin). Then click the Enter button.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ ”) occurs upon connecting to the web-based interface of the router, make sure that you have properly connected the router to your computer.
9
DIR-620 Quick Installation Guide
Right after the first access to the web-based interface you are forwarded to the page for changing the administrator password specified by default.
Enter the new password in the Password and Confirmation fields. Then click the Save button.
!
Remember or write down the new password for the administrator account. In case of losing the new password, you can access the webbased interface of the router only after restoring the factory default settings via the hardware Reset button. This procedure wipes out all settings that you have configured for your router.
After successful registration the system statistics page opens. The page displays general information on the router and its software.
The web-based interface of the router is bilingual (English/Russian). Select a needed language from the menu displayed when the mouse pointer is over the
Language caption. You can change the language of the web-based interface in any menu item.
10
DIR-620 Quick Installation Guide
Configuring Connection to the Internet
!
You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection. Otherwise contact your ISP.
WiMAX WAN Connection
1. If your operator specified an identifier for the WiMAX network, proceed to the WiMAX / Information page, enter the required value in the SSID field and click the Connect button.
2. Go to the Net / Connections page and click the Add button.
3. In the Physical layer section, select the USB-WIMAX value from the
Physical interface drop-down list.
4. In the General settings section, specify a name for your connection
(any name for easier identification) in the Name field and select the
IPoE value from the Connection Type drop-down list.
5. For Static IP connection: fill in the IP Address, Netmask, Gateway
IP Address, and Primary DNS server fields.
6. For Dynamic IP connection: select the Obtain an IP address
automatically and Obtain DNS server addresses automatically checkboxes.
7. Click the Save button.
8. On the Net / Connections page, select the choice of the Default
gateway radio button corresponding to the new WiMAX WAN connection.
11
DIR-620 Quick Installation Guide
3G WAN Connection
1. Go to the Net / Connections page and click the Add button.
2. In the General settings section, specify a name for your connection
(any name for easier identification) in the Name field and select the 3G value from the Connection Type drop-down list.
3. In the Physical layer section, select the USB value from the Physical
interface drop-down list.
4.
In the PPP Settings section, enter authorization data provided by your operator (the username (login) in the PPP Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required.
5. In the APN field, enter the access point name, and in the Dial number field, enter the number dialed to connect to the authorization server of the operator.
6. Click the Save button.
7. On the Net / Connections page, select the choice of the Default
gateway radio button corresponding to the new 3G WAN connection.
12
DIR-620 Quick Installation Guide
PPPoE or IPoE WAN Connection
1. Go to the Net / Connections page and select the WAN connection.
2. In the General settings section, select a needed value from the
Connection Type drop-down list.
3. In the Physical layer section, select the value corresponding to the
INTERNET port of the router (port 5) from the Physical interface drop-down list.
4. If your ISP uses MAC address binding, enter the address registered by your ISP upon concluding the agreement in the MAC field.
5. For Static IP connection (IPoE): fill in the IP Address, Netmask,
Gateway IP Address, and Primary DNS server field.
6. For Dynamic IP connection (IPoE): select the Obtain an IP address
automatically and Obtain DNS server addresses automatically checkboxes.
7. For PPPoE connection: enter authorization data provided by your ISP
(the username (login) in the PPP Username field and the password in the Password and Password confirmation fields), or select the
Without authorization checkbox if authorization is not required.
8. If needed, fill in other fields on the page in accordance with data provided by the ISP.
9. Click the Save button.
13
DIR-620 Quick Installation Guide
PPTP or L2TP WAN Connection
1. Go to the Net / Connections page and select the WAN connection.
2. In the General settings section, select the IPoE value from the
Connection Type drop-down list.
3. In the Physical layer section, select the value corresponding to the
INTERNET port of the router (port 5) from the Physical interface drop-down list.
4. If your ISP uses MAC address binding, enter the address registered by your ISP upon concluding the agreement in the MAC field.
5. For Static IP connection: fill in the IP Address, Netmask, Gateway
IP Address, and Primary DNS server fields.
6. For Dynamic IP connection: select the Obtain an IP address
automatically and Obtain DNS server addresses automatically checkboxes.
7. Click the Save button.
8. On the Net / Connection page, click the Add button.
9. In the General settings section, specify a name for your connection
(any name for easier identification) in the Name field and select a needed value (PPTP or L2TP) from the Connection Type drop-down list.
10. In the Physical layer section, select the WAN value from the Physical
interface drop-down list.
11. Fill in other fields on the page in accordance with data provided by the
ISP.
12. Click the Save button.
13. On the Net / Connections page, select the choice of the Default
gateway radio button corresponding to the new PPTP or L2TP WAN connection.
14
DIR-620 Quick Installation Guide
Configuring Local Area Network
1.
Go to the Net / Connections page and select the LAN connection. If needed, change the IP address and subnet mask for the LAN interface of the router in the IP Address and Netmask fields of the IP settings section. Then click the Save button.
2.
By default, the DHCP server of the router is enabled. On the DHCP
server tab you can change the parameters of the DHCP server. If you want to manually assign IP addresses to devices of your LAN, disable the
DHCP server (select the Disable value from the Mode drop-down list).
3.
After specifying the DHCP server settings, click the Save button.
15
DIR-620 Quick Installation Guide
Configuring Wireless Network
By default, the wireless network of the router is open (it requires no password to access it). To avoid unauthorized access to your wireless local area network, change the default settings of the router.
Example of Wireless Settings
1. Go to the Net / Wi-Fi page.
2. Go to the Security settings tab.
3. Select the WPA-PSK value from the Network Authentication dropdown list.
!
4. Enter a key (a password that will be used to access your wireless network) in the Encryption Key PSK field. Use digits and Latin characters.
5. Select the AES value from the WPA Encryption drop-down list.
6. Click the Change button.
If you perform initial configuration of the router via Wi-Fi connection, note that immediately after changing the wireless default settings you will need to reconfigure the wireless connection using the newly specified settings.
16
DIR-620 Quick Installation Guide
Saving Settings to Non-volatile Memory
In order to avoid losing the new settings upon hardware reboot (accidental or intentional power-off of the device), it is recommended to save the settings to the non-volatile memory of the router.
Click the Save&Reboot line in the top-page menu displayed when the mouse pointer is over the System caption.
Wait until the router is rebooted. Now you can use it to access the Internet or access the web-based interface of the router to configure additional parameters
(for detailed description of every page of the web-based interface, see the
“User Manual” document).
17
DIR-620 Quick Installation Guide
TECHNICAL SUPPORT
You can find software updates and user documentation on our website.
D-Link provides its customers with free support within the product's warranty period.
Customers can contact the technical support group by phone or by email/Internet.
FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK
OFFICES WORLDWIDE VISIT http://www.dlink.com/corporate/worldwideoffices/
18
