ANDES 5 ANDES 7i

ELLIPTICAL OWNER’S MANUAL

Read the ELLIPTICAL gUIdE before using this OWNER’S MANUAL.

2

IMPORTANT PRECAUTIONS

SAVE THESE INSTRUCTIONS

Read this ELLIPTICAL gUIdE before using the OWNER’S MANUAL. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions.

3

4

WARNING

TO REDUCE THE RISk Of bURNS, fIRE, ElECTRICAl SHOCk OR INjURy TO pERSONS:

• If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• When exercising, always maintain a comfortable pace. do not sprint above 80 RPMs on this machine. Incorrect or excessive exercise may damage your health.

• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

• do not turn pedal arms by hand.

• Make sure handlebars are secure before each use.

• Keep the topside of the foot support clean and dry.

• Care should be taken when mounting or dismounting the equipment. Before mounting or dismounting, move the pedal on the mounting or dismounting side to its lowest position and bring the machine to a complete stop.

• do not wear clothes that might catch on any part of the elliptical.

• Always wear athletic shoes while using this equipment.

• do not jump on the elliptical.

• At no time should more than one person be on the elliptical while in operation.

• This elliptical is intended for in-home use only. do not use this elliptical in any commercial, rental, school or institutional setting.

• Failure to comply will void the warranty.

• do not use elliptical in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply will void the warranty.

• This elliptical complies with the EN957-1/9 standard, class of elliptical: HA; braking system is adjustable.

• To prevent electrical shock, never drop or insert any object into any opening.

• Keep power cord away from heated surfaces. do not carry this unit by it’s supply cord or use the cord as a handle.

• disconnect all power before servicing or moving the equipment. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• do not use other attachments that are not recommended by the manufacturer. Attachments may cause injury.

• do not operate where aerosol (spray) products are being used or when oxygen is being administered.

• Use the elliptical only as described in the elliptical guide and owner’s manual.

• The equipment shall be installed on a stable base.

At NO time should children under the age of 13 be closer to the elliptical than 10 feet.

At NO time should children under the age of 13 use the elliptical.

Children over the age of 13 or disabled persons should not use the elliptical without adult supervision.

It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

GROUNDING INSTRUCTIONS

If an elliptical should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

WARNING

Connect this exercise product to a properly grounded outlet only.

Never operate product with a damaged cord or plug even if it is working properly. Never operate any product if it appears damaged, or has been immersed in water. Contact your Locad dealer for replacement or repair.

WARNING

Heart rate monitoring systems may be inaccurate. Over exercise may result in series injury or death.

If you feel faint, stop training immediately.

5

6

ASSEMBLY

WARNING

There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is next to the serial number.

ENTER YOUR SERIAL NUMBER ANd MOdEL NAME IN THE BOXES BELOW:

SERIAL NUMBER:

MOdEL NAME:

7

HANDlEbAR SET

ANDES 5

SHOWN

pUlSE GRIpS bOTTlE HOlDER

CONSOlE MAST bOOT pEDAl ARM fOOTpAD

GUIDE RAIl SET

8

CONSOlE

CONSOlE MAST

MAIN fRAME pOWER CORD SOCkET

STAbIlIZER TUbE

TRANSpORT WHEEl

ROllER WHEEl COVER

TOOlS INClUDED:

pRE ASSEMBLY

5 mm Allen Wrench (w/ Screw driver)

8 mm Allen Wrench

13/15 mm Flat Wrench

pARTS bOX INClUDED:

1 Main Frame

1 Left Handlebar

1 Right Handlebar

1 Back Console Mast Cover

1 Front Console Mast Cover

1 console Mast (with console)

1 Hardware Bag

2 Handlebar Cover

1 Owner’s Manual

1 Power Cord

UNpACkING

Unpack the product where you will be using it. Place the elliptical carton on a level flat surface. It is recommended that you place a protective covering on your floor. Never open box when it is on its side.

NOTE: during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

NEED HElp?

If you have questions or if there are any missing parts, contact your local dealer. Contact information may be located on the back panel of your manual or on the warranty card.

ANDES 5

9

ANDES 5

ASSEMBLY

STEp 1

1

B

A

2

A Remove the 4 pRE-INSTAllED WASHERS (A) and SCREWS (b) from the MAIN fRAME (2).

B Carefully pull CONSOlE CAblE from the

CONSOlE MAST (1) then attach to another

CONSOlE CAlbE on the MAIN fRAME (2).

C Attach CONSOlE MAST (1) to MAIN fRAME

(2) using 4 pRE-INSTAllED WASHERS (A), 4

SCREWS (b).

10

ASSEMBLY

STEp 2

1

C D

2

3

D

E

F G H pART

C d g

H

E

F

HARDWARE fOR pACkAGE 2

TypE DESCRIpTION

RINg Φ16.0xΦ26.2x11.5T

WASHER Φ16.0xΦ25.0x1.5T

WASHER

SPRINg WASHER

SCREW

COVER

Φ8.6xΦ26.0x2.0T

Φ8.2xΦ15.4x2.0T

M8X1.25PX20L

--

2

2

2

2

QTy

2

4

A Attach HANDlEbAR SET (3) onto CONSOlE

MAST (1) using 1 RING (C), 2 WASHERS (D),

1 WASEHR (E), 1 SpRING WASHER (f) and 1

SCREW (G), 1 COVER (H).

B Repeat step A on the other side.

C Attached CONSOlE MAST bOOT (4&5) to

MAIN fRAM (2).

ANDES 5

4

5

11

ANDES 5

ASSEMBLY

STEp 3

K

F

J

6

3

I pART

F

I

J

K

HARDWARE fOR pACkAGE 3

TypE DESCRIpTION

SPRINg WASHER Φ8.2xΦ15.4x2.0T

SCREW M8X1.25PX70L-12L

WASHER

NUT

Φ8.2xΦ20.0x1.5T

M8X1.25P

QTy

2

2

2

2

A Attach the pEDAl ARM (6) onto HANDlEbAR

SET (3) with 1 SCREW (I), 1 WASHER (j), 1

SpRING WASHER (f) and 1 NUT (k).

B Repeat step A on the opposite of the elliptical.

12

ANDES 5

ECB Magnetic Brake System

Overall dimension: 1740 x 690 x 1750 mm /

66” x 27” x 69”

Folding dimension: 1025 x 690 x 1750 mm /

40” x 27” x 69”

Max. User Weight: 136 kg / 300 lbs

Net Weight: 78.7 kg / 174 lbs gross Weight: 93.7 kg / 207 lbs

ANDES 7i

Induction Brake System

Overall Dimension :1740 x 690 x 1720 mm /

66” x 27” x 68”

Folding Dimension : 1025 x 690 x 1720 mm /

40” x 27” x 69”

Max. User Weight : 136 kg / 300 lbs

Net Weight : 82.5 kg / 182 lbs gross Weight : 97.5 kg / 215 lbs

ANDES 5

ASSEMBLY COMPLETE!

13

ANDES 5

ANDES 7i

FOLDING INSTRUCTION

FOLD UP INSTRUCTION

(1) To position the footpad wheel in the proper position. For ease of folding, position right or left footpad wheel located in the Ideal

Folding Area (see below picture 1).

(2) Rotate the pedal arm and place footpad wheel like picture 2 or picture 3.

(3) To grip the handle (picture 4).

(4) Pull up until guide rail set locks onto place.

HANDlE IDEAl fOlDING AREA

(picture 1)

(picture 4)

(picture 2)

14

(picture 3)

UNFOLDING INSTRUCTION

FOLD DOWN INSTRUCTION

(1) To grip the handle, push forward gently.

(2) Pull up on the handle to release.

(3) Pull back to fold down.

HANDlE

ANDES 5

ANDES 7i

15

MOVING The eLLIPTICaL

16

WaRNING!

Our ellipticals are heavy, use care and additional help if necessary when moving.

Failure to follow instructions could result in injury.

ELLIPTICAL OPERATION

This section explains how to use your elliptical’s console and programming.

The BASIC OPERATION section in the ELLIPTICAL gUIdE has instructions for the following:

•

lOCATION Of THE EllIpTICAl

•

pOWER/GROUNDING INSTRUCTIONS

•

fOOT pOSITIONING

•

MOVING THE EllIpTICAl

•

lEVElING THE EllIpTICAl

•

USING THE HEART RATE fUNCTION

•

pOWER/MANUAl INClINE OpERATION

17

ANDES 5

A

G

E

J

K

L

M

18

4 8 12 16 20

Energy

Saver

Energiesparmodus

I

F

C

D

H

B

ANDES 5 CONSOlE OpERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A) lCD DISplAy WINDOWS: Time, distance, Speed, RPM, Resistance Level, Heart Rate, Calories, Watts, HR Wheel,

Resistance Profile, Passport Connection.

b) ENERGy SAVER: to minimize energy consumption, your machine will enter energy saver mode automatically (after entering stand-by mode for 15 mins) and can be quickly woken up with a touch of a button.

C)

ARROW bUTTONS: used up and down arrow button to select program, set up your console or change resistance while exercising.

D) ENTER bUTTON: used to confirm setting of workout program or user profile.

E) START AND STOp bUTTON: press to begin exercising, pause your workout or resume exercising after pause. Hold for 3 seconds to reset the console.

f) CHANGE DISplAy / bACk bUTTON : used to scroll through display modes and workout feedbacks. Press to switch display column and change between profile display mode for resistance(upper bar displayed) or watt profile for your current workout watt (lower bar displayed). also used to navigate back to the user setup progress.

G) AUDIO IN jACk: use to connect with your cellphone or MP3 to play your workout music with integrated speaker.

H) RESISTANCE DIRECT bUTTON: use the direct button to chose your desired workout resistance.

I) SpEAkER: play music through speakers when connected to your media player.

j) SMART DEVICE AND READING RACk: holds your smart phone, tablet or reading materials.

k) pASSpORT: It will on screen when connect to Passport.

l) pASSpORT QUICk kEy: used to connect to Passport. Press and sync with Passport.

M) VOlUME bUTTON: used to turn up and turn down the volume.

ANDES 5

19

ANDES 7i

A

K

L

M

G

E

J

20

5 10 15 20 30

Energy

Saver

Energiesparmodus

I

F

C

D

H

B

ANDES 7

i

CONSOlE OpERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A) lCD DISplAy WINDOWS: Time, distance, Speed, RPM, Resistance Level, Heart Rate, Calories, Watts, HR Wheel,

Resistance Profile, Passport Connection.

b) ENERGy SAVER: to minimize energy consumption, your machine will enter energy saver mode automatically (after entering stand-by mode for 15 mins) and can be quickly woken up with a touch of a button.

C)

ARROW bUTTONS: used up and down arrow button to select program, set up your console or change resistance while exercising.

D) ENTER bUTTON: used to confirm setting of workout program or user profile.

E) START AND STOp bUTTON: press to begin exercising, pause your workout or resume exercising after pause. Hold for 3 seconds to reset the console.

f) CHANGE DISplAy / bACk bUTTON : used to scroll through display modes and workout feedbacks. Press to switch display column and change between profile display mode for resistance(upper bar displayed) or watt profile for your current workout watt (lower bar displayed). also used to navigate back to the user setup progress.

G) AUDIO IN jACk: use to connect with your cellphone or MP3 to play your workout music with integrated speaker.

H) RESISTANCE DIRECT bUTTON: use the direct button to chose your desired workout resistance.

I) SpEAkER: play music through speakers when connected to your media player.

j) SMART DEVICE AND READING RACk: holds your smart phone, tablet or reading materials.

k) pASSpORT: It will on screen when connect to Passport.

l) pASSpORT QUICk kEy: used to connect to Passport. Press and sync with Passport.

M) VOlUME bUTTON: used to turn up and turn down the volume.

ANDES 7i

21

ANDES 5

22

ANDES 5 DISplAy WINDOWS

•

TIME: Shown as minutes : seconds. View the time

•

RpM: Revolutions Per Minute.

•

DISTANCE: Shown as km. Indicates distance traveled or distance remaining during your workout.

•

SpEED: Shown as KM/H. Indicates how fast the wheels

•

WATTS: displays current user power output.

•

lEVEl: Shows the current level of resistance.

•

CAlORIES: Total calories burned during your workout.

•

HEART RATE: Shown as BPM (beats per minute). Used to monitor your heart rate.

•

MAXIMUM HEART RATE: Shows your maximum heart rate. The Change display button switches between your

MAXIMUM HEART RATE and your current HEART RATE.

The MAXIMUM HEART RATE is calculated as (220-age).

•

HEART RATE WHEEl: displays your current activity zone during your workout. With this Heart rate wheel you can be certain if your exercise level fits your workot goal.

WARM UP: 0-60% of maximum heart rate.

WEIGHT LOSS: 60-70% of maximum heart rate.

IMPROVE FITNESS: 70-80% of maximum heart rate.

IMPROVE PERFORMANCE: 80-90% of maximum heart rate.

MAxIMUM PERFORMANCE: 90-100% of maximum heart rate.

•

pASSpORT: Indicates when the machine is in Passport mode to sync with Passport.

ANDES 7i

ANDES 7

i

DISplAy WINDOWS

•

TIME: Shown as minutes : seconds. View the time

•

RpM: Revolutions Per Minute.

•

DISTANCE: Shown as km. Indicates distance traveled or distance remaining during your workout.

•

SpEED: Shown as KM/H. Indicates how fast the wheels are moving.

• WATTS: displays current user power output.

•

lEVEl: Shows the current level of resistance.

•

CAlORIES: Total calories burned during your workout.

•

HEART RATE: Shown as BPM (beats per minute). Used to monitor your heart rate.

•

MAXIMUM HEART RATE: Shows your maximum heart rate. The Change display button switches between your

MAXIMUM HEART RATE and your current HEART RATE.

The MAXIMUM HEART RATE is calculated as (220-age).

•

HEART RATE WHEEl: displays your current activity zone certain if your exercise level fits your workot goal.

WARM UP: 0-60% of maximum heart rate.

WEIGHT LOSS: 60-70% of maximum heart rate.

IMPROVE FITNESS: 70-80% of maximum heart rate.

IMPROVE PERFORMANCE: 80-90% of maximum heart rate.

MAxIMUM PERFORMANCE: 90-100% of maximum heart rate.

•

WATT SCAlE AND pROfIlE DISplAy: shows your current workout watt. ex. 50W dot will light up to show when reaching or selecting 25-50 watt. You may use change display key to switch back to workout profile display.

Note: Scale will only show up to 400w in Watts programs to reflect your target watt range of 25-400 watt.

•

pASSpORT: Indicates when the machine is in Passport mode to sync with Passport.

23

24

GETTING STARTED

QUICk START

1) Make sure the power is on.

2) Press START / STOP to start exercise in MANUAL mode.

3) Press to adjust resistance level during the workout.

START yOUR WORkOUT

1) Select guest / user1 / user2 / user3 / user4.

2) Select your weight.

3) Select your age.

4) Select your desired program.

5) Select your gender (required only under Fit-Test program).

6) Select the program settings, time, level, etc.

7) Press Start/Stop to start your workout.

Note: Console will save your setting for user 1 / 2 / 3 / 4 ready for next workout.

TO ClEAR SElECTION/RESET THE

CONSOlE

Hold START/STOP for 3 seconds.

fINISHING yOUR WORkOUT

When your workout is complete, the bike will stop and beep. You can unplug the machine or it will enter

Energy Saver Mode in 15 mins.

pROGRAM INfORMATION

Andes 5:10 programs (Manual, Intervals, game, Weight Loss, Rolling, Reverse Train, Random, Constant Watts, THR Zone, Custom )

Andes 7i:14 programs (Manual, Intervals, game, Fit Test, Weight Loss, Weight Loss Plus, Rolling, Reverse Train, Constant Watts,

Interval Watts, THR Zone, %THR, Strength Builder, Custom )

1) MANUAl: Allows you to adjust the resistance level to your preference, without a preset program. Adjust your resistance manually during your workout. User sets time and resistance using (up/down arrow) and ENTER.

2) INTERVAlS: Improves your strength, speed, and endurance by raising and lowering the resistance levels throughout your workout to involve both your heart and muscles. Time based program with 16 levels to choose from. User sets time and level using (up/down arrows) and ENTER.

( Andes 5 )

INTeRVaLS

Warm Up Program Segments - Repeat Cool down

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

Seconds 60 60 60 60 30 60 30 60 60 30 30 60 60 30 30 60 60 60 60 60

Level 1

1

1

1

1

2

2

2

2

3

3

3

3

5

5

5

5

2 3 4 5

2 2 3 5

2 2 3 6

2 2 4 7

2 2 5 8

3 5 6 9

6

1

2

3

4

5

7

1

2

3

4

5

8

5

6

7

8

9

9

5

6

7

8

9

10 11 12 13 14 15 16 17 18 19 20

1 5 1 1

2 6 2 2

3 7 3 3

4 8 4 4

5 9 5 5

5 5 1 3

6 6 2 3

7

8

7

8

3

4

4

5

9 9 5 6

3 5 7 10 6 6 10 10 6 10 6 6 10 10 6 7

2 2 1

2 2 1

2 2 1

2 2 1

5 3 2

5 3 2

5 3 2

5 3 2

3 5 8 11 7 7 11 11 7 11 7 7 11 11 7 8

3 5 9 12 8 8 12 12 8 12 8 8 12 12 8 9

4 5 10 13 9 9 13 13 9 13 9 9 13 13 9 10 5 4 3

4 8 11 14 10 10 14 14 10 14 10 10 14 14 10 11 8 4 3

6 10 12 15 11 11 15 15 11 15 11 11 15 15 11 12 10 6 3

6 10 13 16 12 12 16 16 12 16 12 12 16 16 12 13 10 6 3

9 13 14 17 13 13 17 17 13 17 13 13 17 17 13 14 13 9 5

9 13 15 18 14 14 18 18 14 18 14 14 18 18 14 15 13 9 5

9 13 16 19 15 15 19 19 15 19 15 15 19 19 15 16 13 9 5

9 13 17 20 16 16 20 20 16 20 16 16 20 20 16 17 13 9 5

25

26

( Andes 7i )

INTeRVaLS

Warm Up Program Segments - Repeat Cool down

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

Seconds 60 60 60 60 30 60 30 60 60 30 30 60 60 30 30 60 60 60 60 60

Level 1 2

1 3

1 3

1 3

1 3

3 4

3 4

3 4

3 4

4 6

3 4 5 6

3 4 7 1

3 4 9 3

3 6 10 4

7

1

8

7

9

7

10 11 12 13 14 15 16 17 18 19 20

1

3 9 9 3

7 1 1 7

9 3 3 9

7 1 4 3

9 3 4 3

4 10 10 4 10 4 4 10 10 4 6 3

3 7 12 6

7 9 13 7

6 12 12 6 12 6 6 12 12 6 7 3

7 13 13 7 13 7 7 13 13 7 9 7

7 10 15 9 9 15 15 9 15 9 9 15 15 9 10 7

7 12 16 10 10 16 16 10 16 10 10 16 16 10 12 7

7 13 18 12 12 18 18 12 18 12 12 18 18 12 13 7

7 15 19 13 13 19 19 13 19 13 13 19 19 13 15 7 6 4

4 6 12 16 21 15 15 21 21 15 21 15 15 21 21 15 16 12 6 4

4 9 15 18 22 16 16 22 22 16 22 16 16 22 22 16 18 15 9 4

4 9 15 19 24 18 18 24 24 18 24 18 18 24 24 18 19 15 9 4

7 13 19 21 25 19 19 25 25 19 25 19 19 25 25 19 21 19 13 7

7 13 19 22 27 21 21 27 27 21 27 21 21 27 27 21 22 19 13 7

7 13 19 24 28 22 22 28 28 22 28 22 22 28 28 22 24 19 13 7

7 13 19 25 30 24 24 30 30 24 30 24 24 30 30 24 25 19 13 7

3 1

3 1

3 1

3 1

4 3

4 3

4 3

4 3

3) GAME: This warm up game simulates a Car Racing game. To control the car up and down, you pedal faster or slower. Try to avoid those barriers and keep on track. Your remaining chances will be shown on upper LCd with 10 dots and each time you hit a barrier one dot will be removed. You only have 11 chances to complete the circuit, so be careful.

program will change resistance automatically during test per an embedded chart. Try to keep your RPM until you can not go any further. Console will look up the table and give you your current physical condition estimation.

Protocol for Men

12

13

14

15

8

9

10

11

Stage

1

2

3

6

7

4

5

Time(min)

0 - 2

2 - 4

4 - 6

6 - 8

8 - 10

10 - 12

12 - 14

14 - 16

16 - 18

18 - 20

20 - 22

22- 24

24- 26

26 - 28

28 - 30

Intensity(Watts)

35

70

105

140

175

210

245

280

315

350

385

420

455

490

525

Protocol for Women

12

13

14

15

8

9

10

11

Stage

1

2

3

6

7

4

5

Time(min)

0 - 2

2 - 4

4 - 6

6 - 8

8 - 10

10 - 12

12 - 14

14 - 16

16 - 18

18 - 20

20 - 22

22- 24

24- 26

26 - 28

28 - 30

Intensity(Watts)

25

50

75

100

125

150

175

200

225

250

275

300

325

350

375

5) WEIGHT lOSS: Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat burning zone. Time based program with 16 levels to choose from. User sets time and level using (up/down arrows) and ENTER.

Please drink enough water while and after doing exercise to enhance the weight loss results.

( Andes 5 )

12

13

14

15

16

8

9

10

11

6

7

4

5

Level

1

2

3

Warm Up

WeIGhT LOSS

Program Segments - Repeat Cool down

Seconds 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

1 2 3 4

1

1

1

1

2

2

2

2

2

2

2

3

3

3

2

2

2

2

5

5

5

3

3

4

5

6

7

8

5 6 7 8

3 3 4 4

4 4 5 5

5 5 6 6

6 6 7 7

7 7 8 8

9

5

6 6 6 6

7

8

9

10 11 12 13 14 15 16 17 18 19 20

5

7

8

9

5

7

8

9

5

7

8

9

4 4 3 3

5 5 4 4

6 6 5 5

7 7 6 6

8 8 7 7

8 8 9 9 10 10 10 10 9 9 8 8

9 9 10 10 11 11 11 11 10 10 9 9

3 2 2 1

3 2 2 1

4 2 2 1

5 2 2 1

6 5 3 2

7 5 3 2

8 5 3 2

2 3 5 9 10 10 11 11 12 12 12 12 11 11 10 10 9 5 3 2

3 4 5 10 11 11 12 12 13 13 13 13 12 12 11 11 10 5 4 3

3 4 8 11 12 12 13 13 14 14 14 14 13 13 12 12 11 8 4 3

3 6 10 12 13 13 14 14 15 15 15 15 14 14 13 13 12 10 6 3

3 6 10 13 14 14 15 15 16 16 16 16 15 15 14 14 13 10 6 3

5 9 13 14 15 15 16 16 17 17 17 17 16 16 15 15 14 13 9 5

5 9 13 15 16 16 17 17 18 18 18 18 17 17 16 16 15 13 9 5

5 9 13 16 17 17 18 18 19 19 19 19 18 18 17 17 16 13 9 5

5 9 13 17 18 18 19 19 20 20 20 20 19 19 18 18 17 13 9 5

27

28

Warm Up

WeIGhT LOSS

Program Segments - Repeat Cool down

Seconds 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

12

13

14

15

16

8

9

10

11

6

7

4

5

Level

1

2

3

1

1

1

1

1

3

3

3

3

4

4

4

4

7

7

7

2

3

3

3

3

4

4

4

4

6

6

9

9

3

3

3

3

3

7

7

7

7

7

4 5 6 7

4 4 4 6

4

6

6

7

6

7

7

9

8

6

9

7

10 11 12 13 14 15 16 17 18 19 20

7 7

7 9 9 9

7 6 6 4

9 7 7 6

9 10 10 10 10 9 9 7

7 9 9 10 10 12 12 12 12 10 10 9

4

6

7

9

4

4

6

7

9 10 10 12 12 13 13 13 13 12 12 10 10 9 7 4

10 12 12 13 13 15 15 15 15 13 13 12 12 10

12 13 13 15 15 16 16 16 16 15 15 13 13 12

13 15 15 16 16 18 18 18 18 16 16 15 15 13

15 16 16 18 18 19 19 19 19 18 18 16 16 15

3

3

3

3

7

7

7

7

12 16 18 18 19 19 21 21 21 21 19 19 18 18 16 12

15 18 19 19 21 21 22 22 22 22 21 21 19 19 18 15

15 19 21 21 22 22 24 24 24 24 22 22 21 21 19 15

3

3

3

3

4

4

4

6

6

9

9

13 19 21 22 22 24 24 25 25 25 25 24 24 22 22 21 19 13

13 19 22 24 24 25 25 27 27 27 27 25 25 24 24 22 19 13

13 19 24 25 25 27 27 28 28 28 28 27 27 25 25 24 19 13

3

3

3

3

1

1

1

1

4

4

4

4

7

7

7

7 13 19 25 27 27 28 28 30 30 30 30 28 28 27 27 25 19 13 7

( Andes 7i )

6) WEIGHT lOSS plUS (ANDES 7i ONly): Promotes weight loss by increasing and decreasing the resistance, while keeping you in your fat burning zone. Time based program with 15 levels to choose from and greater intensity than the weight loss program. User sets time and level using (up/down arrows) and ENTER.Please drink enough water while and after doing exercise to enhance the weight loss results.

Warm Up

WeIGhT LOSS PLUS

Program Segments - Repeat Cool down

Seconds 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

12

13

14

15

8

9

10

11

6

7

4

5

Level

1

2

3

1 2 3

1 3 3

3 4 4

3 4 6

3 6 6

4 6 7

4 7 9

4 5 6 7

4

4

6

7 10 9 10 12 12 9 10 13 13 12 10 9 7 6 6

9

9

6

7

9

4

6

7

6

7

9

8

7

9

7

10 10

10 11 12 13 14 15 16 17 18 19 20

4

7

6

9

9 9 7 6

9 9 6 7 10 10 9 7

12 12 10 9

4 4 3 3

6 4 4 4

7 6 6 4

12 10 12 13 13 10 12 15 15 13 12 10

13 12 13 15 15 12 13 16 16 15 13 12

9

9

7

9

6

7

6 9 10 10 15 13 15 16 16 13 15 18 18 16 15 13 10 10 9

6 9 10 12 16 15 16 18 18 15 16 19 19 18 16 15 12 10 9

6 10 12 13 18 16 18 19 19 16 18 21 21 19 18 16 13 12 10 6

7 10 13 13 19 18 19 21 21 18 19 22 22 21 19 18 13 13 10 7

7 12 13 15 21 19 21 22 22 19 21 24 24 22 21 19 15 13 12 7

9 13 15 16 22 21 22 24 24 21 22 25 25 24 22 21 16 15 13 9

9 13 16 18 24 22 24 25 25 22 24 27 27 25 24 22 18 16 13 9

6

6

4

4

3

3

1

3

9 15 16 18 25 24 25 27 27 24 25 28 28 27 25 24 18 16 15 9

10 15 18 19 27 25 27 28 28 25 27 30 30 28 27 25 19 18 15 10

7) ROllING: Maintains weight by gradually raising and lowering the resistance level to gradually raise and lower your heart rate.

( Andes 5 )

Warm up

Rolling

Program Segments - Repeat Cool down

Seconds 60 60 60 60 30 30 30 30 30 30 30 30 30 30 60 60 60 60

8

9

10

11

12

13

14

Level

1

2

3

6

7

4

5

1

1

1

2

2

3

3

4

4

4

4

4

4

4

4

2 3 4 5

1 2 2 1

2 2 3 2

2 3 3 3

3 3 4 4

4 4 4 5

5 4 5 6

5 5 5 7

5 5 5 8

5 5 5 9

6 7 8 9 10 11 12 13 14 15 16 17 18

2 3 4 3

3 4 5 4

4 5 6 7

5 6 7 8

2 1 2 3

3 2 1 2

8

9

7

8

6

7

5

6

6 7 8 9 10 9 8 7

7 8 9 10 10 10 9 8

7 8 8 9

2 1 1 1

3 2 1 1

4 2 1 1

5 3 1 1

6 3 3 2

7 4 3 2

9 10 10 9 8 4 3 2

8 9 9 10 10 11 11 10 9 4 3 2

9 10 10 11 11 12 12 11 10 5 4 3

5 6 6 10 10 11 11 12 12 13 13 12 11 6 5 4

5 7 7 11 11 12 12 13 13 14 14 13 12 6 5 4

5 8 8 12 12 13 13 14 14 15 15 14 13 7 6 5

5 9 9 13 13 14 14 15 15 16 16 15 14 7 6 5

5 9 9 14 14 15 15 16 16 17 17 16 15 8 7 6

1

1

1

1

1

1

1

1

1

1

1

1

1

1

( Andes 7i )

Warm up

Rolling

Program Segments - Repeat Cool down

Seconds 60 60 60 60 30 30 30 30 30 30 30 30 30 30 60 60 60 60

8

9

10

11

12

13

14

Level

1

2

3

6

7

4

5

1

1

1

3

3

4

4

6

6

6

6

6

6

6

6

2

1

3

3

4

6

7

7

7

7

7

7

7

7

7

3

3

3

4

4

6

6

7

7

7

9

4

3

4

4

6

6

7

7

7

7

9

5

1

3

4

6

7

9

6 7 8 9 10 11 12 13 14 15 16 17 18

3 4 6 4

4 6 7 6

3 1 3 4

4 3 1 3

6 7 9 10 12 10 9 7

7 9 10 12 13 12 10 9

3 1 1 1

4

6

7

9 10 12 13 15 13 12 10 9 4 4 3

10 12 13 15 15 15 13 12 10

10 10 12 12 13 13 15 15 13 12

12 12 13 13 15 15 16 16 15 13

13 13 15 15 16 16 18 18 16 15

15 15 16 16 18 18 19 19 18 16

10 10 16 16 18 18 19 19 21 21 19 18

3

3

4

6

6

6

7

9

9

12 12 18 18 19 19 21 21 22 22 21 19 10

13 13 19 19 21 21 22 22 24 24 22 21 10

1

1

1

4

4

4

6

7

7

9

9

13 13 21 21 22 22 24 24 25 25 24 22 12 10

1

1

1

3

3

3

4

6

6

7

7

9

1

1

1

1

1

1

1

1

1

1

1

1

1

1

29

30

8) REVERSE TRAIN: Special training program to build your muscle. This program will gradually increases resistance level and prompt you to pedal at a Forward (F), or Reverse (R) to help you reach your fitness goal.

( Andes 5 )

( Andes 7i )

Time

12

13

14

15

16

8

9

10

11

6

7

4

5

Level

1

2

3

Time

12

13

14

15

16

8

9

10

11

6

7

4

5

Level

1

2

3

Reverse Train

60 60 60 60 90 45 90 30 45 90 30 45 90 30 45 90 60 60 60 60

Warm up

1 2 3 4

F R F R

5 6 7 8

F R F R F R F R Cool down

9 10 11 12 13 14 15 16 17 18 19 20

1

1

1

1

1

1

1

1

1

1

1

1

2

2

2

2

1

1

1

1

3

3

3

3

2

2

2

3

3

4

4

5

3

4

5

6

7

8

9

10

2

3

4

5

6

7

8

9

3

4

5

6

7

8

9

10

1

2

3

4

5

6

7

8

2 3 1 2

3 4 2 3

4 5 3 4

5 6 4 5

3 1 2 3

4 2 3 4

5 3 4 5

6 4 5 6

2 1 1 1

2 1 1 1

2 1 1 1

3 1 1 1

6 7 5 6

7 8 6 7

7 5 6 7

8 6 7 8

3 3 2 1

4 3 2 1

8 9 7 8 9 7 8 9 4 3 2 1

9 10 8 9 10 8 9 10 5 3 2 1

1 1 1 2 11 10 11 9 10 11 9 10 11 9 10 11 2 1 1 1

1 1 1 2 12 11 12 10 11 12 10 11 12 10 11 12 2 1 1 1

2 2 2 3 13 12 13 11 12 13 11 12 13 11 12 13 2 1 1 1

3 3 3 4 14 13 14 12 13 14 12 13 14 12 13 14 3 1 1 1

3 4 4 5 15 14 15 13 14 15 13 14 15 13 14 15 3 3 2 1

3 4 5 6 16 15 16 14 15 16 14 15 16 14 15 16 4 3 2 1

3 5 6 7 17 16 17 15 16 17 15 16 17 15 16 17 4 3 2 1

4 6 7 8 18 17 18 16 17 18 16 17 18 16 17 18 5 3 2 1

Reverse Train

60 60 60 60 90 45 90 30 45 90 30 45 90 30 45 90 60 60 60 60

Warm up

1 2 3 4

F R F R

5 6 7 8

F R F R F R F R Cool down

9 10 11 12 13 14 15 16 17 18 19 20

1 1 1 3

1 1 1 3

1 1 1 3

1 1 1 4

4 3 4 1

6 4 6 3

7 6 7 4

9 7 9 6

3 4 1 3

4 6 3 4

6 7 4 6

7 9 6 7

4 1 3 4

6 3 4 6

7 4 6 7

9 6 7 9

3 1 1 1

3 1 1 1

3 1 1 1

4 1 1 1

1 3 4 4 10 9 10 7 9 10 7 9 10 7 9 10 4 4 3 1

1 3 4 6 12 10 12 9 10 12 9 10 12 9 10 12 6 4 3 1

1 3 4 6 13 12 13 10 12 13 10 12 13 10 12 13 6 4 3 1

1 3 4 7 15 13 15 12 13 15 12 13 15 12 13 15 7 4 3 1

1 1 1 3 16 15 16 13 15 16 13 15 16 13 15 16 3 1 1 1

1 1 1 3 18 16 18 15 16 18 15 16 18 15 16 18 3 1 1 1

3 3 3 4 19 18 19 16 18 19 16 18 19 16 18 19 3 1 1 1

4 4 4 6 21 19 21 18 19 21 18 19 21 18 19 21 4 1 1 1

4 6 6 7 22 21 22 19 21 22 19 21 22 19 21 22 4 4 3 1

4 6 7 9 24 22 24 21 22 24 21 22 24 21 22 24 6 4 3 1

4 7 9 10 25 24 25 22 24 25 22 24 25 22 24 25 6 4 3 1

6 9 10 12 27 25 27 24 25 27 24 25 27 24 25 27 7 4 3 1

9) RANDOM (ANDES 5 ONly): Special designed chart based program that will simulate resistance being changed randomly.

Warm up

Random

Program Segments Cool down

Seconds 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

8

9

10

11

12

13

14

6

7

4

5

Level

1

2

3

1

1

1

2

2

3

3

4

4

4

4

4

4

4

4

2

1

2

2

3

4

5

5

5

5

5

5

5

5

5

3 4 5 6

2 2 1 3

2 3 2 4

3 3 3 5

3 4 4 6

4

4 5 6 8 10 7 9 12 7 8 11 6

5

5

5

6

7

8

9

9

4

5

5

5

6

7

8

9

9

5

7

8

9

7

9

7

5

6 3 5 8

7

8

9 6 8 11 6 7 10 5

11

10 12

8

2

4

5

8

9

9

4

6

7

10 11 12 13 14 15 16 17 18

7

9

10

10 13

11 14

2 3 6 1

3 4 7 2

4 5 8 3

5

8

9

6

9

9

12

10 13

11 13 10 12 15 10 11 14

4

7

8

9

10 12 14 11 13 16 11 12 15 10

11 13 15 12 14 17 12 14 16 11

12 14 16 13 15 18 13 14 17 12

13 15 17 14 16 19 14 15 18 13

14 16 18 15 17 20 15 16 19 14

1

2

2

3

3

4

4

4

5

5

6

6

7

7

1

1

1

1

3

3

3

3

4

4

5

5

6

6

1

1

1

1

2

2

2

2

3

3

4

4

5

5

1

1

1

1

1

1

1

1

1

1

1

1

1

1

10) CONSTANT WATTS: This workout automatically adjusts the resistance to keep you within a set Watts range and maintains your desired level of exercise intensity.

1) Select Constant Watts program using and press ENTER.

2) Set time using and press ENTER.

3) Select desired watts using and press ENTER.

4) Press START to begin the program.

11) INTERVAl WATT pROGRAM (ANDES 7i ONly): Allows you to choose a high WATTs value and a low WATTs value. The interval program will switch between High and Low WATTs values, making for a very intense and effective workout.

1) Select Constant Watts program using and press enter.

2) Set time using and press enter .

3) Select your desired low watts target and press enter .

4) Select your desired high watts target and press enter .

5) Press START to begin the program.

31

32

12) THR ZONE: Simulate the intensity of your favorite sport as the program resistance automatically adjusts to maintain a set

Target Heart Rate range. (Suggest to use chest belt with this program. You may purchase chest belt separately from your dealer)

1) Select THR Zone program using and press ENTER.

2) Select TIME using and press ENTER.

3) The HEART RATE window will flash showing the default target heart rate of 80 beats per minute. Select your target heart rate (from heart rate training chart) using and press ENTER.

4) Press START to begin.

HEART RATE TRAINING

The first step in knowing the right intensity for your training is to find out your maximum heart rate (max HR = 220 – your age). The age-based method provides an average statistical prediction of your max HR and is a good method for the majority of people, especially those new to heart rate training. The most precise and accurate way of determining your individual max HR is to have it clinically tested by a cardiologist or exercise physiologist through the use of a maximal stress test. If you are over the age of 40, overweight, have been sedentary for several years, or have a history of heart disease in your family, clinical testing is recommended. This chart gives examples of the heart rate range for a 30 year old exercising at 5 different heart rate zones. For example, a 30-year-old’s max HR is 220 – 30 = 190 bpm and

90% max HR is 190 × 0.9 = 171 bpm.

Target Heart

Rate Zone

VERY HARd

90

–

100%

HARd

80

–

90%

MOdERATE

70

–

80%

LIgHT

60

–

70%

VERY LIgHT

50

–

60%

Workout duration

2

<

5 min

–

10 min

Example THR

Zone (age 30)

171

152

–

–

190

171 bpm bpm

10

–

40 min

133

–

152 bpm

40

–

80 min

114

–

133 bpm

20

–

40 min

104

–

114 bpm

Your

THR Zone

Recommended For

Fit persons and for athletic training

Shorter workouts

Moderately long workouts

Longer and frequently repeated shorter exercises

Weight management and active recovery

13) % THR (ANDES 7i ONly): Benefits weight loss by maintaining an optimum exercise level to burn fat, while adjusting the resistance to keep you in your target heart rate zone. First set up your personal data (your machine will automatically calculate your maximum workout heart rate) and select the percentage you wish to workout base on your maximum heart rate. (Suggest to use chest belt with this program. You may purchase chest belt separately from your dealer)

Note: The heart rate program is base on your heart rate target. Resistance will change automatically according to your pedaling speed and make sure you keep your workout in your target heart rate. Please do not pedal too slow or too fast.

If you are out of the target zone LCd will show arrow sign beside RPM column to tell you to adjust your speed. Upper arrow for speed up your RPM and arrow down for slowing down your workout.

14) STRENGTH bUIlDER (ANDES 7i ONly): Help you gradually increase your muscle strength with a preset workout program. Time based program with 20 levels to choose from. User sets time and level using (up/down arrows) and ENTER.

Time

12

13

14

15

8

9

10

11

16

17

18

19

20

6

7

4

5

Level

1

2

3

Strength Builder

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

Warm up

1 2 3 4

F R F R

5 6 7 8

F R F R F R F R Cool down

9 10 11 12 13 14 15 16 17 18 19 20

1 1 3 3

1 1 3 3

1 1 3 3

1 3 3 4

1 4 1 4

3 4 3 6

4 4 3 4

6 6 3 6

1 4 1 4

3 4 3 6

4 3 4 4

6 3 6 6

1 4 1 4

3 4 3 6

3 4 4 3

3 6 6 3

3 3 1 1

3 3 1 1

3 3 1 1

4 3 3 1

3 4 4 4

3 4 6 6

4 7 4 7

6 9 6 9

4 7 4 7

6 9 6 9

4 7 4 7

6 9 6 9

4 4 4 3

6 6 4 3

4 6 7 9 9 12 7 12 9 10 7 12 9 10 7 12 9 7 6 4

4 6 7 9 12 12 9 12 12 9 12 12 9 12 12 9 9 7 6 4

6 9 10 10 12 15 12 15 12 15 12 15 12 15 12 15 10 10 9 6

6 9 10 10 15 15 12 15 15 12 15 15 12 15 15 12 10 10 9 6

6 10 12 13 15 18 15 18 15 18 15 18 15 18 15 18 13 12 10 6

6 10 12 13 18 18 15 18 18 15 18 18 15 18 18 15 13 12 10 6

7 12 13 15 18 21 18 21 18 21 18 21 18 21 18 21 15 13 12 7

7 12 13 15 21 21 18 21 21 18 21 21 18 21 21 18 15 13 12 7

9 13 16 18 21 24 21 24 21 24 21 24 21 24 21 24 18 16 13 9

9 13 16 18 24 24 21 24 24 21 24 24 21 24 24 21 18 16 13 9

9 15 16 18 25 25 22 25 25 22 25 25 22 25 25 22 18 16 15 9

10 15 18 19 27 27 24 27 27 24 27 27 24 27 27 24 19 18 15 10

10 16 19 21 28 28 25 28 28 25 28 28 25 28 28 25 21 19 16 10

12 18 21 22 30 30 25 30 30 25 30 30 25 30 30 25 22 21 18 12

33

34

15) CUSTOM: Customized workout, time defaults to 15 minutes.

1) First enter the program setting and profile display will guide you through all the workout column.

2) Use upper and lower arrow to change the resistance and press enter to confirm. Console will display your current segment number and guide you through segment 1 to segment 15.

3) After finish all setting press START to begin.

4) Program resets if press ENTER is held for 5 seconds.

USING yOUR MEDIA plAyER

1) Connect the included AUdIO AdAPTOR CABLE to the AUdIO IN JACK on the console and the headphone jack on your media player.

2) Use your media player buttons to adjust song settings.

3) Remove the AUdIO AdAPTOR CABLE when not in use.

SyNCING WITH pASSpORT

1) Using the arrow key on the passport remote control to scroll to the setup icon and press the Select.

2) Follow the on-screen prompt to press and hold the PASSPORT QUICK KEY buttons on the equipment’s console for 3-5 seconds.

3) Once your sync is successful, the display on the console will show PASSPORT icon.

4) The message displayed on-screen will notify you if the sync was successful or failed.

ENERGy SAVER MODE

This machine is equipped with Energy Saver mode. When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after 15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on the console.

35

36

ANDES 5 EXplODED VIEW

9

11

G14

G06

Z05

Z06

Z04

Z04

Z08

14

7

3

Q10

J10

J03

J04x2

AJ1

Q09

Z09

R15

R16

J07

J05

Q04

Q01

Z10

Z06

Z02

J08

Q07

Q04

P06

Q06x3

P07x3

P08

Q04

P04

Q05x6

P10

B32

B42

B43

R06

B38x4

B37x4

Q05x2

P17

B42

13

P03

B30B31 P02

B29

B24

B35

B28

B36

B26

B43x2

B45x2

B41

B40

1

B43

V02

B28

B35

B36

B26

P11

S03x4

S01 B41

V04

B51

B52

B24

S02

Q08

R12

R08

R07

R18

R09

B39

Q08

B36x2

B26x2

Q04

Q04

R17

Q08

Q07

B41

Q02

R18

Q04

J04

R12

R09

R07

Q04x2

R08

J08J09

AJ1

P21

Z08

J05

J07

Q07

J07

J06

R16

R15

J04

J03

Z04

10

G14

4

Z02

Z06Z10

Z04

Z07Z06

Z05

G06

8

Z09

B41

2

12

B40

B41

B42

B43

B52

B51

B45

B35

B24

B26

B28

B29

B30

B31

B32

B39

8

9

4

7

B36

1

2

3

10

ANDES 5 pARTS lIST

NO.

dESCRIPTION

BEARINg;dRY;PAP 2015;SHUN dE;SHUN dE

AdJUSTABLE LEVELER

TRANSPORTS WHEEL ;PC;BLACK;FC16;

PULL PIN;EP247

CLIP CC S-12 EXTERNAL

SPRING;CMP;Φ1.2xΦ14.5x17.0Lx8.5N;SWP;WZN

AIR STICK;SLOW-dROP;75Kg;MAX(331)MIN(213

COVER;STABILIZER TUBE;FRONT;HIPS,PH-88;

COVER;STABILIZER TUBE;MId;HIPS,PH-88;E

SCREW;BH;Φ4x15L;SM;PH;BZN;POT

SCREW;BH;M8X1.25PX30L;HS;CRMO;

NUT;NLK;M8X1.25P;BZN;

SCREW;SPECIAL;M8x10L/Φ10x41L;MACHINE THR

WASHER;FLT;Φ12.0xΦ25.0x1.5T;TFN;

WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO

SCREW;BH;M8X1.25PX45L;HS;BZN;

NUT;HEx;3/8-16UNC-4T;SS41;BLACK ANNODIZE

CONSOLE MAST SET;SEMI-ASSY;S-EP580;

FRAME SET;SEMI-ASSY;BACK;S-EP580;

PEdAL ARM SET;SEMI-ASSY;S-EP580;

PEdAL ARM SET;RIgHT;S-EP580;

ARM REST SET;SEMI-ASSY;LEFT dOWN;S-EP580;

ARM REST SET;SEMI-ASSY;RIgHT dOWN;S-EP580;

ARM REST SET;SEMI-ASSY;LEFT UP;S-EP580

ARM REST SET;SEMI-ASSY;RIgHT UP;S-EP580

QTY

2

4

1

4

1

1

2

2

2

1

2

4

1

1

1

1

1

1

1

1

1

1

4

1

1

NO.

J08

J09

J10

Q01

Q02

Q10

Q09

Q04

11

12

AJ1

J03

J05

J06

J07

J04

P02

P11

P03

P04

Q05

Q06

Q07

Q08

P06 dESCRIPTION

LINK ARM SET;SEMI-ASSY;LEFT;S-EP580;

LINK ARM SET;SEMI-ASSY;RIgHT;S-EP580;

CRANK SET;WELdINg;EP543-1US;

COVER;CRANK;HIPS;Q520-7-3;EP580-2KM;

SCREW;SH;M10x60L-22L;HS;BED;G12.9;

NUT;M10X1.5P;g10;BLACK ANNOdIZEd;

WASHER;FLAT;Φx10.2xΦx15.0x1.5T;BL ZN;R

SCREW;BH;M5X0.8PX8L;CT;PH;BZN;

SCREW;BH;Φ4x15L;SM;PH;BZN;POT

COVER;CRANK;INNER;HIPS;Q520-7-3;EP580-2

WASHER;WW;Φ17.2xΦ22.5x0.5T;65MN

SIdE COVER-EXREAWORK;LEFT;SCREEN PRINT;

SIdE COVER-EXREAWORK;RIgHT;SCREEN PRINT

COVER;CONSOEL MAST;BACK;HIPS;Q520-7-3;E

COVER;CONSOEL MAST;FRONT;HIPS;Q520-7-3;

SCREW;BH;Φ4x15L;SM;PH;WZN;POT

CLIP;STANdARd;WUSN-4039;

BRACKET SIdE COVER

SCREW;TRHW;Φx4x15L;TC;PH;BED;POT;GRE

FIX PILLAR;PP;TM81

WIRE;SENSOR;700MM;CYLINdRICAL MAgNETI

CONSOLE WIRE;UP1;280MM;CKM254301-8P

SCREW;BH;Φ4x10L;TC;PH;BAN;POT

POWER WIRE;DC;600MM(DC+CKM 25430101-2P)

TIE STRAP AdHESIVE;

QTY

2

1

2

2

1

1

1

9

2

2

1

1

2

2

4

6

1

1

1

1

4

2

8

3

1

37

38

NO.

R06

R07

R08

R09

R12

R17

R18

R15

R16

14

V02

V04

B37

B38

P07

P08

P10

P05

S01

S02

S03

13

Z09

Z02 dESCRIPTION

CABLE TIE;NYLON;BLACK;160L

CABLE TIE;NYLON;300L;WHITE

PLATE POWER SOCKET

SCREW;BUTTON HEAD;Φ4x10L;SHEET METAL THR

ECB SET;INTERNAL;ERP 0.5W;

STEEL ROPE;ECB; 160L;L1+L2=65

SCREW;BH;Φ4x12L;TC;PH;BAN;POT dRIVE SET;SEMI-ASSY;S-EP580;

KEY;ROUND;DUAL-END;6x6x14L;

SNAP RINg;EXTERNAL;CST;BAN;S-25;

FIX PLATE;EYE BOLT;SPC;1.3T;AB01

NUT;LCK;AN05 M25X1.5P;SS41;BOX;

KEY;ROUND;SIGNAL-END;6x6x20L;

FLYWHEEL;8.0Kg EP537-1US;

WASHER;FLAT;Φ12.5xΦ20.0x2.0T;

SCREW;BH;M6x1.0Px15L;MT;HS;G8.8;BAN;BP;

WASHER;FLAT;Φx6.2xΦx30.0x1.5T;BL ZN;RO

CONSOLE SET;SEMI-ASSY;S-EP580;

BAR COdE LABEL;EP580-2KM

SAFETY LABEL;CE;EP580-2KM

WASHER;FLAT;Φx12.0xΦx23.0x2.5T;BLACK ZI

SCREW;SH;M10X1.5PX20L;HS;BZN;

WRENCH;HEX;L-TYPE;#8MMX147L;

SCREW;BH;M8X70L-12L;HS;g8.8;BZN;BP;

NUT;NLK;M8X1.25P;BZN;

QTY

2

2

1

2

2

1

2

2

1

4

3

1

1

1

4

1

1

2

4

4

1

1

2

1

2

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

NO.

Z06

Z07

Z10

Z04

Z05

Z08

P21

P17 dESCRIPTION

WASHER;SPRING LOCK;Φx8.2xΦx15.4x2.0T;BL

WASHER;FLAT;Φx8.6xΦx26.0x2.0T;BL ZN;RO

WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO

WASHER;FLT;Φ16.0xΦ25.0x1.5T;

SCREW;BH;M8X20L;HS;BZN;BP;g8.8;

RING;RUBBER;Ψ26.2xΨ16.20x11.50

WRENCH;HEX L-TYPE;5MM 52X140L;BLACK OX

WRENCHOPEN-TYPE#13#15**dISC USE 005382-Z

AdAPTER;EUROPE;100-240V/50HZ;12V/2A;HOR

AdAPTER;HK/KW/gB;100-240V/50HZ;12V/2A;H

SWITCH POWER (NZL);100-240V/50HZ 12V/2A

AdAPTER;SOUTHAFRICA;100-240V/50HZ;12V/2A

AdAPTER;INdIA;100-240V/50HZ;12V/2A;2.0M;

AdAPTER;ISREL;100-240V/50HZ;12V/2A;2.0M;

AdAPTER;SWITZERLANd;100-240V/50HZ;12V/2A

AdAPTER;ARgENTINA;100-240V/50HZ;12V/2A;2

AdAPTER;CHINA;100-240V/50HZ;12V/2A;2.0M;

AdAPTER;UL;100-240V;12V/2A;2.0M;

POWER ADAPTOR;BRAZIL;100-240V/60HZ

ADAPTOR SET;CL;IN,100-240V/50-60HZ;12V/2

AdAPTER;HK/KW/gB;100-240V/50HZ;12V/2A;H

MULII_PURPOSE AdAPTER;WA-12A;10-12A;CL

ADAPTER;TW/JP;100-240V/50-60HZ;12V/2A;2.

WIRELESS RECEIVER SET

QTY

2

2

1

1

1

2

4

4

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

ANDES 7

i

EXplODED VIEW

11

9

P11

P04

G14

G06

Z05

Z07

Z04

P21

Z04

Z08

P14

CKM

15

CKM

7

J04x2

3

J10

J07

J06

Q03

J03

AJ1

Q04

Z09

R15

R16

J07

J05

Q05

Q01

Z10

Z06

Z02

Q05

Q09

Q05

P10

R06

J08

Q08

1

R07

R12R09

14

P04

B38x4

B37x4

Q06x2

Q06x6

P17

P06

P07x3

P08

Q07x3

B42

B30B31

P02

B29

B32

B42

B43

B24

B35

B28

P15

P09x2

CKM

P13

V04

B41

B39

Q05

B43

B51

B36x2

B52

B26x2

B24

Q09

Q05

B36

B26

B43x2

B45x2

B28

B35

B36

B26

Q09

B41

Q02

Q08

B41

B40

R07

P12

Q05

J04

R12

P18

Q05x2

R09

J08J09

AJ1

P19

Z08

Z04

J05

J07

J04

J10

Q08

J06

J07

R16

R15

J04

J03

10

G14

4

Z02

Z06Z10

B41

8

Z05

Z09

G06

12

2

39

40

B26

B24

B30

B29

B31

B35

B36

B51

B32

B41

B42

B43

B45

B39

B40

B28

7

8

3

4

B52

1

P01

2

9

ANDES 7

i

pARTS lIST

NO.

dESCRIPTION

AIR STICK;SLOW-dROP;75Kg;MAX(331)MIN(213

SCREW;BH;Φ4x15L;SM;PH;BZN;POT

SCREW;BH;M8X1.25PX30L;HS;CRMO;

NUT;NLK;M8X1.25P;BZN;

WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO

COVER;STABILIZER TUBE;FRONT;HIPS,PH-88;

COVER;STABILIZER TUBE;MId;HIPS,PH-88;E

TRANSPORTS WHEEL ;PC;BLACK;FC16;

AdJUSTABLE LEVELER

BEARINg;dRY;PAP 2015;SHUN dE;SHUN dE

CLIP CC S-12 EXTERNAL

PULL PIN;EP247

SPRING;CMP;Φ1.2xΦ14.5x17.0Lx8.5N;SWP;WZN

SCREW;BH;M8X1.25PX45L;HS;BZN;

NUT;HEx;3/8-16UNC-4T;SS41;BLACK ANNODIZE

WASHER;FLT;Φ12.0xΦ25.0x1.5T;TFN;

SCREW;SPECIAL;M8x10L/Φ10x41L;MACHINE THR

CONSOLE MAST SET;SEMI-ASSY;S-EP581;

WIRE;CONSOLE;DOWN1200MM(CKM254301-8P+SM-

FRAME SET;SEMI-ASSY;BACK;S-EP581;

PEdAL ARM SET;SEMI-ASSY;LEFT;S-EP581;

PEdAL ARM SET;SEMI-ASSY;RIgHR;S-EP581;

ARM REST SET;SEMI-ASSY;LEFT dOWN;S-EP581;

ARM REST SET;SEMI-ASSY;RIgHT dOWN;S-EP581;

ARM REST SET;SEMI-ASSY;LEFT UP;S-EP581

QTY

1

1

4

2

1

2

4

1

1

1

1

1

2

4

1

4

2

1

1

2

1

1

1

1

NO.

AJ1

J03

J05

J06

J07

10

G06

11

12

J04

J08

J09

J10

Q01

Q08

Q09

Q03

Q04

Q02

Q05

Q06

Q07

P10

P06

P07 dESCRIPTION

ARM REST SET;SEMI-ASSY;RIgHT UP;S-EP581

COVER;HANd ARM;ABS/PA757K;Q520-7-3;EP580

LINK ARM SET;SEMI-ASSY;LEFT;S-EP581;

LINK ARM SET;SEMI-ASSY;RIgHT;S-EP581;

CRANK SET;WELdINg;EP543-1US;

COVER;CRANK;HIPS;Q520-7-3;EP580-2KM;

SCREW;SH;M10x60L-22L;HS;BED;G12.9;

NUT;M10X1.5P;g10;BLACK ANNOdIZEd;

WASHER;FLAT;Φx10.2xΦx15.0x1.5T;BL ZN;R

SCREW;BH;M5X0.8PX8L;CT;PH;BZN;

SCREW;BH;Φ4x15L;SM;PH;BZN;POT

COVER;CRANK;INNER;HIPS;Q520-7-3;EP580-2

WASHER;WW;Φ17.2xΦ22.5x0.5T;65MN

SIdE COVER-EXREAWORK;LEFT;SCREEN PRINT;

SIdE COVER-EXREAWORK;RIgHT;SCREEN PRINT

SCREW;BH;Φ4x15L;TC;PH;BAN;POT

CLIP;STANdARd;WUSN-4039;

BRACKET SIdE COVER

SCREW;TRHW;Φx4x15L;TC;PH;BED;POT;GRE

FIX PILLAR;PP;TM81

COVER;CONSOEL MAST;BACK;HIPS;Q520-7-3;EP580

COVER;CONSOEL MAST;FRONT;HIPS;Q520-7-3;EP580

PLATE POWER SOCKET

TIE STRAP AdHESIVE;

CABLE TIE;NYLON;BLACK;160L

QTY

2

2

2

2

4

1

1

1

2

2

2

1

6

2

1

1

4

2

1

1

8

3

1

9

3

NO.

P13

P18

P19

P20

P09

P14

13

R06

P05

P03

P08

P15

P02

P04

P11

P12

R16

14

15

V04

R07

R09

R12

R15

B37 dESCRIPTION

SCREW;BUTTON HEAD;Φ4x10L;SHEET METAL THR

SCREW;BH;Φ4x10L;TC;PH;BAN;POT

CABLE TIE;NYLON;300L;WHITE

CONSOLE WIRE;UP1;280MM;CKM254301-8P

WIRE;SENSOR;700MM;CYLINdRICAL MAgNETI

OVERCURRENT BREAKER;3A;125V/250V;CITY B

WIRE;POWER SOCKET SET;150 150 300;250

WIRE;ELECTROMAgNET PWR;400MM;EL-2Y VH

FILTER;POWER;3A;220V;BF1106C-3A-02;ERP

WIRE;CTRL BOARd PWR;BLACK;250LOCK700L

WIRE;CTRL BOARd PWR;WHITE;250LOCK700L

CONTROLLER;dIgITAL BRAKINg SYSTEM;EXTRA-

SCREW;BH;Φ4x15L;TC;PH;BAN;POT

SCREW;BH;Φ4x12L;SM;PH;YZN;POT dRIVE SET;SEMI-ASSY;S-EP581;

PULLEY;POLY-V;BOx;NYLON6+30%FIBER;J10Φx2

SCREW;EB;1/4-20UNCX55L;BZN;

NUT;NLK;1/4''-20UNC;BZN;

FIX PLATE;EYE BOLT;SPC;1.3T;AB01

SCREW;BH;M6x1.0Px15L;MT;HS;G8.8;BAN;BP;

WASHER;FLAT;Φx6.2xΦx30.0x1.5T;BL ZN;RO

FLYWHEEL SET;SA;EP257B;

CONSOLE SET;SEMI-ASSY;EP581-2KM;

SAFETY LABEL;CE;EP581-2KM

WASHER;FLAT;Φx12.0xΦx23.0x2.5T;BLACK ZI

QTY

1

1

1

1

4

1

1

1

4

1

1

1

1

1

1

1

1

2

1

2

2

2

2

4

Z09

Z02

Z06

Z07

Z10

Z04

Z05

Z08

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

P21

NO.

B38 dESCRIPTION

SCREW;SH;M10X1.5PX20L;HS;BZN;

WRENCH;HEX;L-TYPE;#8MMX147L;

SCREW;BH;M8X70L-12L;HS;g8.8;BZN;BP;

NUT;NLK;M8X1.25P;BZN;

WASHER;SPRING LOCK;Φx8.2xΦx15.4x2.0T;BL

WASHER;FLAT;Φx8.6xΦx26.0x2.0T;BL ZN;RO

WASHER;FLAT;Φx8.2xΦx20.0x1.5T;BL ZN;RO

WASHER;FLT;Φ16.0xΦ25.0x1.5T;

SCREW;BH;M8X20L;HS;BZN;BP;g8.8;

RING;RUBBER;Ψ26.2xΨ16.20x11.50

WRENCH;HEX L-TYPE;5MM 52X140L;BLACK OX

WRENCHOPEN-TYPE#13#15**dISC USE 005382-Z

EXTERNAL PWR;IN;1.5MM;2M;

EXTERNAL PWR;NEW ZEALANd;1.5MM;2M;

EXTERNAL PWR;EUROPE;1.5MM;2M;

EXTERNAL PWR;CHINA;1.5MM;2M

EXTERNAL PWR;HK/KW/gB;1.5MM;2M;

ExTERNAL PWR;US/CA/TH;16AWG;2M

EXTERNAL PWR WIRE SET;ISRAEL;1.5MM;2

EXTERNAL PWR;ARgENTINA;1.5MM;2M;

EXTERNAL PWR;SOUTH AFRICA;1.5MM;

EXTERNAL PWR;SWEdEN;2M;1.5MM

EXTERNAL PWR;BR;LENgTH:2M;1.5MM2

WIRE;EXTERNAL PWR;SET;CHILE USEd;JIS2 U

EXTERNAL PWR;1.5MM2;2M;THAILANd;

QTY

4

2

2

4

2

2

2

4

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

41

42

NO.

P17 dESCRIPTION

WIRELESS RECEIVER SET

QTY

1

D: Entsorgungshinweis

HORIZON Fitness - Produkte sind recyclebar. Führen Sie das gerät am Ende der Nutzungsdauer einer sachgerechten Entsorgung zu (örtliche Sammelstelle).

Gb: Waste Disposal

HORIZON Fitness products are recyclable. At the end if its useful life please dispose of this article correctly and safely (local refuse sites).

f: Remarque relative à la gestion des dèchets

HORIZON Fitness sont recyclables. A la fin sa durrèe d`utilisation, remettez I´appareil à un centre de gestion de dèchets correct (collecte locale).

Nl: Verwijderingsaanwijzing

HORIZON Fitness producten zijn recycleerbaar. Breng het apparaat aan het einde van de gebruiksduur naar een op recycling gespecialiseerd bedrijf (plaatselijk verzamelpunt).

E: Informaciones para la evacuaciòn

HORIZON Fitness son riciclables. Cuando se termina la vida ùtil de un aparato o una màquina, entrèguelos an una impresa local de eleiminaciòn de residuos para su reciclaje.

I: Indicazione sullo smaltimento

HORIZON Fitness sono reciclabill. Quando I`apparecchio non servirà più, portatelo in un apposito punto di raccolta della Vostra città (Punti di raccolta comunall).

pl: Wskazòwka dotyczàca usuwania odpadòw.

Producty firmy HORIZON Fitness podlegajà recyklingowi. Pod koniec okresu o`ywalnoÈcl pros`z oddac urzàdzenie do wlaÈciwego punkto usuwania odpadòw (lokalny punkt zbiorczy).

ELLIPTICAL OWNER’S MANUAL

Andes 5 & Andes 7i Owner’s Manual 073014’ Rev. 2.1 © 2014 Horizon Fitness