Tectalk PRO -R1

PMR446 Radio

Instruction Manual

Thank you for purchasing this radio.

All our products are built to offer excellent value by combining advanced features, great design and manufacturing quality.

To ensure you are familiar with the operation and features of your radio, and in order to obtain the best performance, please read this manual carefully before operation.

CONTENTS

Caution ...................................................... 4

1 Radio Controls ........................................... 5

2 Equipment and Accessories Supplied ....... 6

3 Fitting the Battery pack .............................. 6

4 Battery Charging ....................................... 7

5 Radio Controls ........................................... 8

6 LCD Display ............................................... 9

7 Basic Radio Operation ............................. 10

8 Radio ID ................................................... 10

9 Function Mode - User Mode .................... 11

10 Function Mode - Advanced Mode ............ 12

11 Radio Features Explained ....................... 13

Volume level ......................................13

Channels .......................................... 13

Transmit Power Hi / low....................13

Privacy Codes ................................... 14

Scan Pause Timer ............................. 14

Hands Free (VOX) Mode................... 15

Busy Channel Lock Out (BCLO) ....... 15

Priority Channel................................. 16

Priority Channel Scan Time............... 16

Dual Watch ........................................ 16

Roger Beep ....................................... 17

Key Beep........................................... 17

Time Out Timer.................................. 18

Call Alert ............................................ 18

Clone ................................................. 18

Squelch Level.................................... 19

Monitor............................................... 19

Display & Keypad Backlight .............. 19

Channel Scan.................................... 19

Privacy Code Scan/Decode .............. 20

Battery Level ..................................... 20

Power Save ....................................... 21

Keypad Lock...................................... 21

12 Troubleshooting........................................ 21

13 CE Declaration ......................................... 21

14 Safety Requirements................................ 22

15 Technical Specifications ........................... 22

Caution

IMPORTANT - READ ALL INSTRUCTIONS carefully and completely before operating your radio and retain this manual for future reference.

NEVER connect the radio to a power source other than the supplied battery. This may damage your product.

NEVER operate your radio with the antenna less than 5cm from exposed parts of the body.

NEVER use the radio in or near a mining facility or other area which uses remotely triggered explosives or an area labelled "Blasting Area".

NEVER use or charge your radio in a potentially explosive atmosphere.

DO NOT place your radio in front of a vehicle airbag.

DO NOT operate your radio on board an aircraft.

DO NOT use your radio with a damaged antenna.

DO NOT attempt to modify your radio in any way.

ALWAYS charge your radio at normal room temperature.

ALWAYS switch off your radio where notices restrict the use of two-way radio or mobile telephones.

ALWAYS replace the accessory jack cover (if applicable) when the jack is not in use.

ONLY use

Albrecht or ALAN approved rechargeable batteries with the supplied charger.

AVOID exposing your radio to water. It

can widthstand spray water and some rain,but has no higher waterproof class.

AVOID storing or charging your radio in direct sunlight.

AVOID storing or using your radio where temperatures are below -20ºC or above +60ºC.

4

1. Radio Controls

1

2

3

4

5

6

7

8

13

14

15

9

10

11

12

16

5

2. Equipment and Accessories Supplied

1. TX-1446 radio (with fixed antenna) 1 unit

2. Li-Ion Battery pack (1000mAh) 1 unit

3. Charging Cradle

4. Power Adaptor

5. Instruction Manual

1 unit

1 unit

1 unit

3. Fitting the Battery pack

Fitting

1. Ensure that your radio is switched off.

2. Align the bottom of the battery pack with the securing slots at the back of the radio.

3. Press the top of the battery into the back of the radio until it

'clicks' home.

Removal

1. Ensure that your radio is switched off.

2. Press down on the battery release catch and separate the battery pack from the radio.

6

4. Battery Charging

To charge your radio, carefully follow these instructions:

1. Connect the power adaptor to the main power supply and connect the adaptor power plug to the charging cradle.

2. Disconnect any radio accessories and ensure the radio is switched off.

3. Insert the radio into the charging cradle until it 'clicks' home. The charger LED will glow red and charging will start. If the charger LED blinks red and green or the charger LED does not light, re-insert the radio into the charging cradle.

4. The battery charging time is typically 12 to 15 hours.

When the battery is fully charged the charger LED will turn green.

LED

Power Adaptor

- Input: 230VAC

- Output: 9 VDC

Charge Cradle

Adaptor Power

Plug

7

5. Radio Controls

1. Power On/Off/Volume control

Turn the knob clockwise to switch on and increase the volume and counter-clockwise to decrease the volume and switch off the radio. The radio will emit a confirmation tone when it switches on.

2. Push-To-Talk (PTT) button

Press and hold this button to speak (transmit) and release the button to hear (receive) messages. You can only communicate with other PMR446 radios when the channel and privacy code settings are the same as yours.

3. UP button

Pressing this button will increase the channel number. In some modes this button is used to adjust the function setting.

4. DOWN button

Pressing this button will decrease the channel number. In some modes this button is used to adjust the function setting.

5. MODE/VOX button

Press this button briefly to activate the function mode. Press the button again (repeatedly) to step through the function menu. Press and hold this button to activate or de-activate the VOX function.

6. SQUELCH/MONITOR button

Press this button briefly to activate and de-activate the squelch level mode. Press and hold this button to activate or de-activate the MONITOR function.

8

8

9

6

7

4

5

1

2

3

7. SCAN/TONE button

Press this button briefly to activate or de-activate the scan mode. Press and hold this button to activate or de-activate the current privacy code (CTCSS/DCS).

8. KEYPAD LOCK/PRIORITY CHANNEL button

Press this button briefly to activate or de-activate the priority channel mode. Press and hold this button to activate or de-activate the keypad lock.

6. LCD Display

1 2 3 4 5 6 7 8 9 10 11 12

18

19

17

Receiver Busy

Icon

Transmit Icon

Dual Watch Icon

VOX Icon

Key Lock Icon

DCS Icon

/ Display

Keytone Icon

Time Out Timer Icon

Monitor Icon

13

14

15

16

14

15

16

17

10

11

12

13

18

19

Scan Icon

Roger Beep Icon

Battery Icon

Priority Channel Icon

Hi Power Icon

BL Busy Lock Icon

Clone Icon

Information Display

Channel Display

CTCSS Icon / Display

9

7. Basic Radio Operation

The PMR446 service which this radio uses shares channels on a 'take turns' basis. This means that other users and groups may be using any channel and privacy code combination.

To communicate with other PMR446 radios, all units must be switched to the same channel (8 choices) and privacy code (50

CTCSS and 104 DCS choices). If the combination you have chosen is already in use please make an alternative selection.

1. Switch on your radio.

2. Check and if necessary change the channel and privacy code settings (see Function Mode).

3. To speak, hold the radio upright, about 10cm from your mouth and press the PTT. Speak slowly and clearly towards the radio. Release the PTT when you finish speaking.

You will hear messages from other radios that are within range and have the same channel and privacy code setting.

The appropriate icon will appear in the radio display when you receive or transmit a message.

8. Radio ID Editing

A n up to 3 digit Radio ID can be displayed when the radio is switched on.

You can customise this Radio ID to identify your radio.

To enter the Radio ID edit mode, switch on the radio whilst pressing the SCAN button and the MODE button.

1. Press the MODE button to select the first position.

2. Use the UP or DOWN button to change the character.

3. Press the MODE button to select the next letter.

4. Repeat steps 2 and 3 until the ID is complete.

5. Turn off the radio to finish editing.

10

9. Function Mode - User Mode

The user mode allows you to set-up and edit the basic functions

(see Radio Features Explained).

To access the consumer mode, press the MODE button briefly.

Each press of the MODE button steps the radio sequentially through the different functions. The radio display indicates the current function. The present setting and associated icon flash.

Use the UP or DOWN button to change the setting. Press the PTT or MODE button or wait for 5 seconds to store your choice. If your do not press any key for 5 seconds your radio will return to standby mode automatically.

NB. Squelch level adjustment works via the SQUELCH button.

Display Functions

Change Privacy Tone

Code (CTCSS)

Change Digital Privacy

Tone Code (DCS)

Select Hands Free Mode

(VOX)

Settings

1 to 50 , Off

1 to 104 , Off

1 to 5 , Off

Select Dual Watch Mode 1 to 8 , Off

Activate Roger Beep On , Off

Activate Key Beep

Change Call Alert Tone

Change Squelch Level

On , Off

1 to 5 , Off

1 to 15 , Auto ,

Off

11

10. Function Mode - Advanced Mode

The advanced mode allows you to program user preferences, activate features and use advanced functions (see Radio Features

Explained).

To access the advanced mode, turn on the radio whilst pressing and holding the SQUELCH button and SCAN button.

Each press of the MODE button steps the radio sequentially though the different functions. The radio display indicates the current function. The present setting and associated icon flash.

Use the UP or DOWN button to change the setting. Press the PTT or MODE button or wait for 5 seconds to store your choice. If you do not press any key for 5 seconds your radio will return to standby mode automatically. If the radio is turned off and turn on again without pressing any buttons, the radio will return to the user mode.

Display Functions

Change Privacy Tone

Code (CTCSS)

Change Digital Privacy

Tone Code (DCS)

Settings

1 to 50 , Off

1 to 104 , Off

Select Scan Stay Timer

1 , 2 , 3 , 5 , 10 ,

15 , 20 , 30 ,45 ,

60 , Off

Select Hands Free Mode

(VOX)

1 to 5 , Off

Select Busy Channel Lock out Mode (Main Channel)

Carrier , Correct tone,

Different tone , Off

Select Priority Channel 1 to 8

Select Priority Scan Time 1 to 5 , Off

12

Select Dual Watch Mode 1 to 8 , Off

Activate Roger Beep On , Off

Activate Key Beep

Time-Out-Timer Settings

Change Call Alert Tone

Clone parameters

Change Squelch Level

On , Off

15 , 30 , 45 , 60 ,

90 , 120 , 180 ,

240 , Off

1 to 5 , Off

Send , Receive ,

Off

1 to 15 , Auto ,

Off

11. Radio Features Explained

Volume Level

To adjust the volume level, use the POWER On/Off/VOLUME control. To increase the volume turn this control clockwise, to decrease the volume turn this control counter-clockwise.

Channels

This radio operates on any one of the 8 PMR446 licence free channels.

To communicate with other PMR446 radios, all units must be switched to the same channel and privacy code. To change the radio channel, press the UP or DOWN button when the radio is in stand-by mode.

Transmit Power: To reduce TX power, keep PTT pressed and toggle

with UP or Down between Hi power mode and low power mode.

13

Privacy Codes (CTCSS and DCS Tone Codes)

This radio is fitted with 50 Analogue Privacy codes (also known as

CTCSS, sub-codes or sub-channels) and 104 Digital Privacy codes

(also known as DCS codes).

Only one type of Privacy code can be used on each channel.

Selecting a Digital Privacy code will override any Analogue Privacy code settings. If the other unit(s) do not have privacy codes ensure your units privacy codes (analogue and digital) are set to 'Off'.

Please note that privacy codes do not prevent other radio users from hearing your conversation. They simply allow you to ignore messages that are using a different privacy code.

Selecting an Analogue Privacy Code

To change the Analogue Privacy Code, press the MODE button until the CTCSS icon and privacy code number flash. Use the UP or DOWN button to select the desired code. Press the PTT or

MODE button or wait for 5 seconds to store your choice. The

CTCSS icon will appear when an Analogue Privacy Code is selected.

Selecting a Digital Privacy Code

To change the Digital Privacy Code, press the MODE button until the DCS icon and privacy code number flash. Use the UP or

DOWN button to select the desired code. Press the PTT or MODE button or wait for 5 seconds to store your choice. The DCS icon will appear when a Digital Privacy Code is selected.

Scan Pause Timer (Advanced mode only)

The Scan Pause Timer allows you to select the period of time that your radio will dwell on an active channel when the scan mode is activated.

Timer values from 1 second to 60 seconds and Off can be selected.

If the timer value is 'Off', the radio will remain on the scanned channel until the signal disappears.

To change the Scan Pause Time, press the FUNCTION button until

SC is shown in the display. Use the UP or DOWN button to select the desired setting. Press the PTT or MODE button or wait for 5 seconds to store your choice.

14

Hands Free (VOX) Mode

When Hands Free (VOX) Mode is selected the radio will automatically transmit when the microphone detects your voice (or other noise). It can be used with the internal microphone or a suitable audio accessory (available separately). To avoid accidental operation and reduce the effect of background noise, there are 5 microphone sensitivity settings.

To select the VOX sensitivity level, press the MODE button until the

VOX icon and current setting flashes. Use the UP or DOWN button to change the sensitivity level (5 is the most sensitive). Press the

PTT or MODE button or wait for 5 seconds to store your choice.

To activate the VOX mode press and hold the MODE button until the VOX icon appears. To de-activate VOX mode, press and hold the MODE button until the VOX icon disappears. VOX mode can only be activated if a sensitivity level has been selected.

Busy Channel Lock Out (BL) Mode (Advanced mode only)

Busy Channel Lock Out prevents you from transmitting when another signal is present. Three modes are available: a. Carrier only (CA)

This will prevent your radio from transmitting when a signal is present on the same channel, regardless of the privacy code.

b. Correct Tone (CT)

This will prevent your radio from transmitting when a signal is present on the same channel, using the same privacy code as your current setting.

c. Different Tone (DT)

This will prevent your radio from transmitting when a signal is present on the same channel, using a different privacy code setting.

To activate and select the BL mode, press the MODE button until the BL icon and current setting flashes. Use the UP or

DOWN button to change the setting. Press the PTT or MODE button or wait for 5 seconds to store your choice. A setting of 'Off' will de-activate this mode.

The BL icon will appear when BL mode is active.

15

Priority Channel Mode (Advanced mode only)

A 'Quick Access' Priority Channel is available by briefly pressing the

KEYPAD LOCK button. This can be used as a reserve or secondary channel.

To program a Priority Channel, press the MODE button until the

Priority Channel icon and current channel setting flashes. Use the

UP or DOWN button to change the channel setting. Press the PTT or MODE button or wait for 5 seconds to store your choice.

The Priority Channel icon will appear when the Priority Channel is selected.

Priority Channel Scan Time

When the Priority Channel is selected, pressing the SCAN button toggles the Priority Channel scan.

Priority Channel scan is similar to channel scanning, however the priority channel is scanned in addition to the other channels. You can select how often the priority channel is checked according to your needs.

To select the Priority Channel Scan Time, press the MODE button until the Priority Channel Scan Time icon and current setting flashes. Use the UP or DOWN button to change the priority channel scan time. Set the scan time to '1' for most frequent and '5' for least frequent. Press the PTT or MODE button or wait for 5 seconds to store your choice.

Each number represents a half second, so a setting of '4' will result in the priority channel being checked every 2 seconds. A setting of

'1' will cause the radio to scan the priority channel alternately with the other channels, e.g. channel 1, priority channel, channel 2, priority channel etc.

Dual Watch Mode

Dual Watch mode allows you to monitor two channels; a primary channel and the dual watch channel. When a signal is received on either channel the unit will pause for 5 seconds before resuming the dual watch.

16

To activate the dual watch mode, first select a radio channel (see

Channels) as the primary channel. To select the dual watch channel press the MODE button until the Dual Watch Icon and current setting flashes. Use the UP or DOWN button to select the desired dual watch channel. Press the PTT or MODE button or wait for 5 seconds to store your choice and activate the dual watch.

The radio display will alternate between the primary and dual watch channels and the dual watch icon will appear.

To deactivate the dual watch press the SCAN button.

If you press the PTT button whilst receiving a signal in Dual Watch

Mode the radio will transmit on the currently displayed channel. If you press the PTT button when no signal is present the radio will transmit on the primary channel.

Roger Beep

The Roger Beep is a short tone that is automatically added to the end of your transmissions to tell other users that you have finished speaking. You can activate or deactivate the Roger Beep as required.

To change the Roger Beep setting, press the MODE button until the

Roger Beep icon and current setting flashes. Use the UP or DOWN button to change the setting. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice.

The Roger Beep icon will appear when Roger Beep is active.

Key Beep

If the Key Beep is activated, your radio will emit a confirmation tone whenever you use the keypad. You can activate or deactivate the

Key Beep as required.

To change the Key Beep setting, press the MODE button until the

Key Beep icon appears. Use the UP or DOWN button to change the setting. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice.

The Key Beep icon will appear when Key Beep is active.

17

Time Out Timer (TOT) setting (Advanced mode only)

This timer is used to limit the transmit time of your radio. By selecting a timer setting, your radio will automatically release the

PTT when the selected time limit is reached.

To change or select the TOT time, press the MODE button until the

TOT icon appears. Use the UP or DOWN button to change the setting. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice.

The TOT icon will appear when Key Beep is active.

Call Alert

To alert other users to your message and gain their attention you can send a Call Alert melody by pressing the PTT button twice in quick succession.

There are five different call alert tones and off.

To change the Call Alert melody, press the FUNCTION button until

'CA' appears. Use the UP or DOWN button to change the setting.

Press the PTT or FUNCTION button or wait for 5 seconds to store your choice.

Clone (Advanced mode only)

Th of your radio (except the Radio ID) can be transferred to or from another T ectalk PRO. To perform this function you will require a TCC-1000 Cloning cable (available separately).

1. Place the two radios side by side and connect the Cloning cable.

2. Switch on the unit whose settings are to be copied (the master unit). Press the MODE button until 'CL' appears. Use the UP or

DOWN buttons and select 'OUT'. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice.

3. Switch on the unit whose settings are to be changed (the slave unit). Press the MODE button until 'CL' appears. Use the UP or

DOWN buttons and select 'IN'. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice. The radios LED will turn green to indicate that it is ready to receive data.

18

4. Press the PTT button of the master radio while the slave radio

LED is green. The LED of the slave radio will go off. The master radio and slave radio will emit a confirmation beep.

5. If the clone fails the slave radio sends an error beep and the LED remains green. Repeat step 4 until a confirmation beep is heard.

If repeated clone attempts fail, repeat the whole procedure from step 1.

If the clone procedure was successful switch off both radios and disconnect the cloning cable. Switch on the slave radio to use the copied data.

Squelch Level Adjustment

This function allows you to adjust the squelch level of your radio.

To change the squelch level, press the Squelch/Mon button briefly.

The current squelch setting will flash. Use the UP or DOWN button to change the setting. Press the PTT button or wait for 5 seconds to store your choice.

There are 15 squelch levels. Level 1 is the most sensitive (open) and level 15 is the least sensitive (closed). Auto is the optimum factory setting and 'Off' is fully open, with constant static noise.

Monitor

The Monitor function is used to briefly check for activity on the current channel, regardless of privacy code settings. It is the same as setting the squelch level to 'Off'.

19

To activate or deactivate the Monitor press the SQUELCH button for about 2 seconds. The Monitor icon will appear when the Monitor is active. It is normal to hear background static noise.

Display & Keypad Backlight

The display and keypad backlight will illuminate for 5 seconds whenever any buttons (except for the PTT button) are pressed.

Channel Scan

The Channel Scan can be used to find or detect users on other radio channels.

To activate/deactivate the channel scan, press the SCAN button briefly. The Scan icon will appear when the channel scan is active.

Scanning will only stop when you deactivate the scan function.

The radio will scan through the 8 channels. If your radio detects a valid signal the scan will pause according to your Scan Pause Timer settings.

If you press the PTT button when your radio detects a signal, the radio will transmit on the same channel. Scanning will resume after approximately 15 seconds. Press the UP or DOWN button to resume scanning immediately.

If you press the PTT button during scanning, the radio will return to your original channel. Scanning will resume after approximately 15 seconds.

Privacy Code (CTCSS/DCS) Scan and Decode

Privacy Code Scan is used to determine which Privacy Code is in use on the current channel.

To activate the privacy code scan press the MODE button until the privacy code number flashes, then press the SCAN button briefly.

The Scan icon will blink when the privacy code scan is active.

The radio will scan through the 50 CTCSS and 104 DCS codes. If your radio detects a valid signal the scan will pause for 5 seconds.

If you press the PTT button when your radio detects a signal, the radio will transmit on the same privacy code and the privacy code will be automatically selected.

20

If you press the PTT button during scanning, the radio will return to your original privacy code. Scanning will resume when the PTT button is released.

To stop scanning, press the SCAN button again or press the MODE button to step to the next menu setting.

To increase battery life use the scan modes sparingly.

Battery Level

The Battery icon indicates when the battery level is low and the battery needs recharging. If necessary, refer to the instructions to recharge the battery.

Power Save

To conserve battery power the radio will automatically enter Power

Save mode after a short period of inactivity. There is no user setting for Power Save.

Key Lock

To toggle the key lock, press and hold the KEYPAD LOCK button.

The key lock icon appears when the lock is activated.

21

12. Troubleshooting

If you experience problems with your TX-1446 first check the battery power level as low batteries can cause problems such as poor transmission, weak reception and reduced sound quality.

Then check the manual and radio display to ensure that a function

(such as VOX or Lock) has not been activated by accident.

If these steps do not solve the problem reset your unit as follows:

1.

Switch off the radio.

2.

Press and hold the MODE button and PTT button together.

3.

Switch on the radio.

This will reset the radio to the factory settings and should resolve most problems.

In case of further difficulty please consult your dealer or visit our websites at www.ttikorea.co.kr or www.tti.uk.com.

13. CE Declaration

This PMR 446 radio Tectalk Pro-R1, marked with the CE symbol, is declared to comply with the essential requirements of the

European Radio and Telecommunication Terminal Directive R&TTE, the EMC Directive and the Low Voltage-Directive (LVD).

It corresponds to the relevant technical standards EN 300 296-2

EN 301 489-1, EN 301 489-05 and EN 60 950.

Please note that different versions of this radio may be available to cover other national requirements for countries outside of European regulations. Such radios may not be for use in Europe.

This radio can be used without license and charges in all EU countries + non EU countries Iceland, Liechenstein, Norway, Switzerland, San Marino.

Italian users must pay a one-time-fee after purchasing the radio.

Please see our latest Conformity Declaration updates in the internet under

www.hobbyradio.de This product is only for sale in other countries under the condition that the distributor can supply a user manual in the official country language.

22

14. Safety Requirements

For charging the rechargeable batteries, only a CE approved AC adaptor complying with the following specifications must be used :

INPUT : 230VAC 50Hz

OUTPUT : 9VDC 300mA

15. Technical Specifications

1) Operating Frequencies (frequency shown in MHz):

Channel

1

2

3

4

Frequency

446.00625

446.01875

446.03125

446.04375

Channel

5

6

7

8

Frequency

446.05625

446.06875

446.08125

446.09375

2) Channel Spacing: 12.5kHz

3) Power Source: 1 x Li-Ion battery

4) Privacy Codes (CTCSS Tone Codes) Table (in Hz):

6

7

8

9

10

Ch Freq.

Ch Freq.

1 67.0

11 97.4

4

5

2

3

71.9

74.4

77.0

79.7

12

13

14

15

100.0

103.5

107.2

110.9

82.5

85.4

88.5

91.5

94.8

16

17

18

19

20

114.8

118.8

123.0

127.3

131.8

26

27

28

29

30

22

23

24

25

Ch Freq.

21 136.5

141.3

146.2

151.4

156.7

162.2

167.9

173.8

179.9

186.2

36

37

38

39

40

32

33

34

35

Ch Freq.

31 192.8

203.5

210.7

218.1

225.7

233.6

241.8

250.3

69.4

159.8

46

47

48

49

50

42

43

44

45

Ch Freq.

41 165.5

171.3

177.3

183.5

189.9

196.6

199.5

206.5

229.1

254.1

23

5) Digital Privacy Codes Table (DCS Tone Codes):

No Code No Code

1 023 22 131

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

025

026

031

032

036

043

047

051

053

054

065

071

072

073

074

114

115

116

122

125

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

132

134

143

145

152

155

156

162

165

172

174

205

212

223

225

226

243

244

245

246

No Code

43

44

45

251

252

255

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

261

263

265

266

271

274

306

311

315

325

331

332

343

346

351

356

364

365

80

81

82

76

77

78

79

83

84

67

68

69

70

71

72

73

74

75

No Code

64

65

66

371

411

412

413

423

431

432

445

446

452

454

455

462

464

465

466

503

506

516

523

526

97

98

99

100

101

102

103

104

88

89

90

91

92

93

94

95

96

No Code

85

86

87

532

546

565

606

612

624

627

631

632

654

662

664

703

712

723

731

732

734

743

754

Alan Electronics GmbH -- Daimlerstr. 1 k -- D-63303 Dreieich / Germany

Repair enquiries & spare parts service: Tel: (+49) 6103 9481 22,

Fax: (+49) 6103 9481 60 or e-mail via [email protected]

Service-Download : www.hobbyradio.de Website: www.albrecht-online.de

24