KB 150023
How to create a Citrix Web Interface client
manually in IDENTIKEY Authentication Server?
Creation date: 16/12/2009
Document type: How To
Last Review: 10/12/12
Revision number: 2
Security status: EXTERNAL
Summary
When you install the Citrix Web Interface, the installation will try to create the client
component on the authentication server. The current versions of the Citrix Web
Interface cannot create the client component on the IDENTIKEY Authentication Server.
You can install the filter without creating the client component and install the client
component manually.
details.
When you install the Citrix Web Interface with an IDENTIKEY Authentication Server,
there may be a problem creating the client component on the IDENTIKEY
Authentication Server during the installation of the Citrix Web Interface.
If this happens, you can install the Citrix Web Interface without creating the client
component record on the IDENTIKEY Authentication Server, and create the client
component manually in IDENTIKEY Authentication Server afterwards.
Applies to: IDENTIKEY Authentication Server 3.1
KB 150023 12/10/2012
© 2010 VASCO Data Security. All rights reserved.
Page 1 of 6
Problem Solution.
•
Install the Citrix Web Interface without creating the component record on
IDENTIKEY Authentication Server:
•
Manually create a Citrix Web Interface client component in IDENTIKEY
Authentication Server:
In the IDENTIKEY Authentication Server Web Administration, choose CLIENTS –
Register:
Select Client Type from list:
Applies to: IDENTIKEY Authentication Server 3.1
KB 150023 12/10/2012
© 2010 VASCO Data Security. All rights reserved.
Page 2 of 6
Select Citrix Web Interface from the drop-down list:
Fill in the IP address of the machine where the Citrix Web Interface has been
installed.
Select the Policy ID to be used.
Do not change the Protocol ID, This must be SEAL
Click the CREATE button
Then click on the link “click here to manage Citrix Web Interface”
Applies to: IDENTIKEY Authentication Server 3.1
KB 150023 12/10/2012
© 2010 VASCO Data Security. All rights reserved.
Page 3 of 6
Click on the License TAB
Click on the button GET LICENSE KEY.
Follow the instructions on the VASCO website to create a license.
Download the created license.dat file to a folder accessible from the IDENTIKEY
Authentication Server.
Click on the button LOAD LICENSE KEY.
Applies to: IDENTIKEY Authentication Server 3.1
KB 150023 12/10/2012
© 2010 VASCO Data Security. All rights reserved.
Page 4 of 6
Browse to the folder where you downloaded the license.dat file and click on the
UPLOAD button
Now you will see the component is licensed.
Click on the button FINISH.
Now the Citrix Web Interface client component is installed.
The filter will connect using SEAL. The default TCP port is 20003.
Applies to: IDENTIKEY Authentication Server 3.1
KB 150023 12/10/2012
© 2010 VASCO Data Security. All rights reserved.
Page 5 of 6
Applies to: IDENTIKEY Authentication Server 3.1
KB 150023 12/10/2012
© 2010 VASCO Data Security. All rights reserved.
Page 6 of 6
">
