advertisement
◉
Touch to zoom
ISOPOD> Optimized for connecting analog personal audio sources to professional audio system inputs. Use to connect CD and MP3 players, computer sound card outputs, mini headphone audio outputs, etc. to professional equipment with balanced inputs suchas a mixing console. Signal is input via a 3.5mm (1/8') stereo TRS jack. Output is via left and right balanced XLRs. Designed for nominal -10 dB input sources with minimal loss from input to output. Features a STEREO / MONO" switch to combine stereo sources into a mono signal and a “20 dB PAD” switch for accommodating "hot" signal sources. A “GROUND LIFT” switch disconnects input ground from the outputs to help eliminate humand buzz. INPUT (3.5mm stereo TRS jack) Use to connect the audio outputs of computer sound cards, CD layers, mini headphone outputs, etc. The 3.5mm (1/8”) jack is a ip/ring/sleeve TE tip is connected to the Left channel, the ike is ques to the Right and the sleeve is common ground to both channels. GND/LIFT (Switch) This switch is usually left in the “GND” position , connected from Input to ma If hum occurs in ei when using the ISOPOD2, setting the switch to the “LIFT” position may help То reduce it. (This disconnects the ground between the input and the XLR outputs.) rounds are er channel STEREO / MONO (Switch) When placed in the “STEREO” BO Me signals are routed to their respective output. In the “MONO” position, the left_and right inputs are summed into a mono signal that is fed to both XLR outputs. PAD (Switch) Most signals will operate PP when set to the “OFF” position. The “PAD” position adds 20 dB ot attenuation to both the left and PS to reduce the possibility of distortion with “hot” signals. LOW-Z BALANCED OUTPUT (XLR jack X 2) Left and Right male XLRs, which provide balanced low impedance signals suitable for connection to balanced, low-Z equipment (mixing console, workstation, etc.) The output signal is a transformer balanced version of the input at almost the same level. Insertion loss is very low with the “PAD” off. www. whirlwindusa.com 92465102367 ISOPOD2 Made In USA This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase. Should warranty service be required, return the unit postage paid along with the original sales receipt to: Whirtwind Music Dist., Inc. 99 Ling Road Rochester NY 14612 Whirlwind will, at its option, repair or replace the unit. This warranty does not cover damage resulting from abuse, unauthorized modifications or use of the product in unintended applications. whirlwind www. whirlwindusa.com
advertisement