Quick Installation Guide
Wireless N Range Extender
Hardware Connection
Extension Socket
LED Indicators
Names
WiFi
Extending
LAN
Status
On
Blink
On
Blink
Off
On
Blink
Off
Description
WiFi is on but no data transmitting exists
Successful wireless connection with data transmitting
Connection with upper AP has been completed
Connecting with upper AP
No connection with upper AP
Successfully connected with the LAN port and no data transmitting exists
Successfully connected with the LAN port with data transmitting
There is no device linked to the LAN port
Button and Port Description
Name Description
Power This button can turn on/off the device.
Press the button for about 10 seconds, the device will restore to factory default settings.
Rst/WPS
LAN
WPS push button for secured easy connection to a wireless network. Press the button for about 5 seconds, it is WPS working.
This port is used to connect to PC.
The default Network Name (SSID) of EX300 is TOTOLINK EX300 (No encryption). After repeater with other Router/AP successfully, the
SSID and password of the extender will change to the connected router/AP’s SSID and password. So before following operation, please make sure you have the SSID and password of the router/AP you need this extender to connect. Besides, TOTOLINK Extender can repeater with many other brands routers/APs.
Copyrights 2013 by TOTOLINK All rights reserved. Website: http://www.totolink.net
Information in this document is subject to change without prior notice.
2
-1
Establish Connection
Method One: Connected by button
Press the Rst/WPS button on EX300.
Press the Rst/WPS button on wireless router for about 5 seconds at the same time.
After 5 seconds, a secure connection will be established automatically.
Connect the LAN port to your computer’s network interface.
Plug the extender into a wall outlet.
Press the power ON/OFF button to start the device.
Rst/WPS
Button
WPS Button
Power
Method two: Connecting by Web Setting_Part A
First, please setup your PC.
● For Windows 2000 or Windows XP Operating System, please comply with following steps to set up.
Right-click “My Network
Places”, click “Properties”
Right-click “Local Area
Connection”, click “Properties”
Double-click “Internet Protocol
(TCP/IP)”
Configure the IP address manually:
IP Address: 192.168.1. x (x can be ranged from 1~253)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.254
Click OK.
2
-2
Establish Connection
Method two: Connecting by Web Setting_Part B
● For Windows Vista or Windows 7 Operating System, please comply with following steps to set up.
Click “Start— Control Panel— Network and Internet— Network Connection”, right-click “Local Area Connection”, and choose “Properties”.
Double-click “Internet Protocol
Version 4 (TCP/IPv4)”
Configure the IP address manually:
IP Address: 192.168.1. x (x can be ranged from 1~253)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.254
Click OK.
3
Wireless Network Connection
Right-click “My Network
Places”, click “Properties”
Confirm the wireless network SSID name, choose one that you would like to connect, then click “Connect”
Input the encrytion key and click “Connect”
Right-click “Wireless Network
Connection”, and click “View
Available Wireless Networks”
Have connected wireless network, you can access
Internet through wireless mode.
Second, please setup the extender.
Typing 192.168.1.254 in the address field of Web Browser.
Then press Enter key.
Click Setup Tool:
EX300
Click Extender Setup, choose Start to enable repeater function.
6
Select one SSID, click Select AP.
8
Enter the right Encryption key to connect. Then click Apply.
The Status line will show you whether connected successfully.
5
Click Search AP.
7 If the SSID you selected is encrypted, it will pop up below window reminding you to input the network key to connect. Click OK.
Enter User Name and Password. Both are admin in lower case letters.
For more information, please go to www.totolink.net
