advertisement
◉
Touch to zoom
E Z I/O 4 pt. 24VDC In/ 4 pt. 110VAC Out Module TM Module Specifications AC/DC Power Supply Specs Re-Order from OmegamationTM Voltage Range Number of Inputs 4 (sink/source) Input Voltage Range 10-28 VDC Peak Voltage 40 VDC Input Current 1.92 mA @ 12 VDC 4.0 mA @ 24 VDC Maximum Input Current 5 mA @ 28 VDC Input Impedance 5.6k @ 10-28 VDC ON Voltage Level > 10 VDC OFF Voltage Level < 2 VDC Min. ON Current 1.5 mA DC Input Specs Min. OFF Current OFF to ON Response AC Output Specs EZIO-4DCI4ACO 1-888-55-66342 1-888-55-OMEGA omegamation.com Terminal Block 300 Volt/10 Amp/ 14AWG UL Rating Pinout Information Pin No. 0.2 mA 2-4 ms, typical 3 ms EZIO-4DCI4ACO 1 Input(1) 2 Input(2) 3 Input(3) 4 Input(4) 5 GND 6 Output(1) ON to OFF Response 2-4 ms, typical 3 ms Status Indicators Red LED for each output Commons 1 point Fuse No Fuse Base Power Required (3.3V) Typical 7.5 mA (all inputs on) 7 Output(2) 8 Output(3) Optical Isolation 2500 Volt 9 Output(4) Wires 1 of 14 AWG, 2 of 18 AWG, 4 of 22 AWG 10 AC_Common Number of Output Points 4 11 Not Connected Number of Commons 1 Output Voltage Range 20-132 VAC Peak Voltage 180 Volt ON Voltage Drop 1.2 V @ 1A Maximum Current 1.2 A @ 25°C, 0.8A @ 50°C for each output Maximum Leakage Current 1mA @ 132 VAC Maximum Inrush Current 38Amps for 16.6ms Minimum Load 15mA OFF to ON Response max 1/2 cycle ON to OFF Response max 1/2 cycle Fuse No fuse Base Power Required (3.3V) 35mA for all 4 on Optical Isolation 2500 Volt Wires 1 of 14 AWG, 2 of 18 AWG, 4 of 22 AWG Internal External
advertisement