datasheet for SR42UBWD by Tripp Lite

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: SR45UBSP1

45U SmartRack Premium Enclosure (includes doors and side panels) - Special shock pallet packaging.

Highlights

45U SmartRack enclosure with doors and side panels

Ships fully assembled on shock pallet with loading ramps

Standard 24" (600mm) width and 42" (1050mm) depth for optimizing floor space

4 interior vertical posts with unthreaded square hole openings

Massive front to rear ventilation capacity

3000 lb stationary / 2250 lb rolling load capacity

Locking, removable, reversible front and rear doors

Locking, removable side panels keyed alike with doors

Meets all enclosure requirements towards PCI DSS (Payment Card Industry

Data Security Standard) Compliance

Description

45U SmartRack Enclosure ships mounted on a special pallet that features additional reinforcement and shock-absorbing material. The pallet's protective cushion safeguards the enclosure and the precision components it contains during re-shipping. Reinforced pallets and reusable packaging provide the flexibility to fully configure rack enclosures in a centralized location and safely re-ship them to remote sites, saving significant service costs. They also allow the freedom to custom-configure enclosures with network and server hardware along with UPS systems, PDUs, KVM switches and a variety of other devices prior to final installation. At the desired location the SR45UBSP1 can be easily maneuvered with its preinstalled casters and can be secured by adjusting the preinstalled levelers.

The SR45UBSP1 houses 3000lbs of standard 19-inch rack equipment in 45U. Its front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.

Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.

With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR45UBUSP1 provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a wall. The SR45UBSP1 meets all requirements toward PCI DSS compliance.

The top panel of the SR45UBSP1 is vented to help remove warm air from the enclosure and draw in cool air by convection. the top panel includes ports for cable routing, and can be quickly removed without tools. The facilitate cable access, the SR45UBSP1 is open-bottom.

All components of the SR45UBSP1 are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.

The SR45UBSP1 comes with a 5-year product warranty. As part of the SmartRack family it is compatible with Tripp Lite's extensive range of rackmount accessories, enabling you to customize your solution to meet any requirements.

Package Includes

SR45UB Rack Enclosure

(4) side panels

(4) side panel locks

(2) door & side panel keys

(50) M6 screws

(50) M6 washers

(50) M6 cage nuts

Owner's Manual

Features

This special version of Tripp Lite's SR45UB SmartRack Enclosure ships mounted on a "shock pallet" that features additional reinforcement and shock-absorbing material for safe loading and re-shipping

Heavy-duty ramps (included) allow enclosure to be rolled on and off the pallet during configuration

Shipping Capacity: shock-pallet supports up to 1,250 lbs. (281 lbs. SmartRack Enclosure weight + up to 969 lbs. of additional equipment), enabling safe loading and re-shipping

Final Installation Capacity: SmartRack Enclosure supports up to 3,000 lbs. of equipment stationary and 2,250 lbs rolling.

Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters. (casters are removable)

Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.

Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).

Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws.

Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.

Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.

Maximum usable internal depth of 37 inches/94 cm (front to rear rail).

Front door is locking, reversible and removable.

Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer to a wall.

Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the front and rear doors.

Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 750mm or 29.5" to match standard data center floor tiles.

Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.

Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground.

Front and rear doors include quick-release ground wires.

Open bottom for cable access.

Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.

Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack.

Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance

Compatibility with airflow optimization accessories as well as cable management accessories.

Specifications

PHYSICAL

Installed whole system maximum rack depth (inches)

Installed whole system maximum rack depth (cm)

Rack Height

Shipping Dimensions

(HWD/in)

Shipping Dimensions

(HWD/cm)

Shipping weight (lbs)

Shipping weight (kg)

Unit Dimensions (in.)

Unit weight (lbs)

Unit weight (kg)

Unit Dimensions (cm)

37

94.0

45U

90.25 x 26 x 45

229.23 x 66.04 x 114.3

357

162

EXTERNAL DIMENSIONS: 83.75 x 23.63 x 43 (HWD)

307

139

212.725 x 60.02 x 109.22

Related Items

Optional Products

Related Model

B020-U08-19-IP

B021-000-17

B021-000-19

B040-008-19

B040-016-19

N252-012

N252-024

N252-048

SRBOLTDOWN

SRCABLEDUCTVRT

SRCABLEDUCT1U

SRCABLELADDER

SRCABLERINGVRT

SRCABLERING1U

SRCABLERING2U

Color

Style

Weight Capacity - Stationary

(lbs)

Weight Capacity - Rolling

(lbs)

Units per Pallet

Black

Floor Standing

3000

2250

1

Weight Capacity - Stationary

(kg)

Approvals

WARRANTY

Product Warranty Period

(Worldwide)

1360.8

Weight Capacity - Rolling (kg) 1020.6

SPECIAL FEATURES

Grounding lug

CERTIFICATIONS

Front and back rear door frames

Certifications UL60950; RoHS; CE

NOM (Mexico) Tested to NOM (Mexico)

EIA/ECA-310-E

5-year limited warranty

Description

Console KVM Switch - 8-Port NetDirector 1U Rackmount Console IP KVM Switch w/19"

LCD

Rackmount Console - 1U Rackmount Console with 17" LCD

Rackmount Console - 1U Rackmount Console with 19" LCD

NetController 19" VGA Console KVM Switch - 8 Port

NetController 19" VGA Console KVM Switch - 16 Port

12-Port Cat6 Patch Panel 568B, 1U

24-Port Cat6 Patch Panel 568B, 1U

48-Port Cat6 Patch Panel 568B

Bolt-Down Kit (Secures included stabilizing brackets or optional stabilizing plates to facility floor.)

6-ft. (1.8 m) Vertical Cable Manager (Double finger duct with cover; toolless mounting.)

1U Horizontal Cable Manager (Finger duct with cover.)

10-ft. x 1-ft. (3 m x 0.3 m) Cable Ladder (Includes 2 sections; requires SRCABLETRAY or SRLADDERATTACH)

6-ft. (1.8 m) Vertical Cable Manager (Flexible ring type; toolless mounting.)

1U Horizontal Cable Manager (Flexible ring type.)

2U Horizontal Cable Manager (Flexible ring type.)

Qty.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

SRCABLETRAY

SRCABLETRAYEXP

SRCAGENUTS

SRCOMBO

SRFANROOF

SRFAN3U

SRSHELF4PHD

SRSHELF4PKYBD

SRSHELF4PSL

SRSHELF4PSLHD

SRSTABILIZE

SRSWITCH

SRXFANROOF

SRXFAN3U

SR1UPANEL10

SR1UPANEL50

UPSHDEARKIT

SRFILTER

SRTHERMDUCT

SRCASTERHDKIT

Roof-Mounted Cable Trough (Provides cable routing and power/data cable segregation.)

Roof-Mounted Cable Trough Vertical Expansion (Requires SRCABLETRAY.)

Square Hole Hardware Kit (Includes 50 M6 screws and washers.)

Door Handles with Combination Lock (2-pack for front and rear doors; includes bypass key.)

Roof-Mounted Fan Panel, 120V (6 high-performance fans; 630 CFM; 5-15P plug; toolless mounting)

3U Fan Panel, 120V (3 high-performance fans; 210 CFM; 5-15P plug.)

Heavy-Duty Fixed Shelf (250 lb / 113 kg capacity; 26 in / 660 mm depth.)

Keyboard Shelf (25 lb / 11 kg capacity; 16-in. / 406 mm depth.)

Standard Sliding Shelf (50lb / 23 kg capacity; 28 1/4 in/ 660 mm depth.)

Heavy-Duty Sliding Shelf (200 lb / 91 kg capacity; 26 in / 660 mm depth.)

Anti-Tip Stabilizing Plate Kit (Provides extra stability for standalone enclosures.)

Magnetic Door Switch Kit for front and rear doors; requires ENVIROSENSE

Roof-Mounted Fan Panel, 208-240V (6 high-performance fans; 420 CFM; C14 inlet; toolless mounting.)

3U Fan Panel, 230V (3 high-performance fans; 315 CFM; C14 inlet.)

1U Blanking Panel Kit (10 pieces; toolless mounting.)

1U Blanking Panel Kit (50 pieces; toolless mounting.)

Heavy-Duty 2-post Front Mounting Ear Kit

Filter Kit for SmartRack Enclosures

SmartRack Thermal Duct Kit for SmartRack Enclosures

Heavy-Duty Rolling Caster Kit (includes 4 casters)

More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=5287 .

Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1