Klipsch RSX-4 Bookshelf Speaker Spec sheet

4" Two-Way Satellite Loudspeaker

RSX-4

The RSX-4 is an ultracompact, video-shielded loudspeaker designed to reproduce the main or surround channels in a high-performance satellite/subwoofer system or to stand alone in any indoor application requiring very small speakers of the highest quality. Perfectly matched cosmetically and sonically to the other Reference Satellite models, its sound also blends well with that of full-size Klipsch loudspeakers, allowing maximum flexibility in system configuration. (RSX-4s are perfect for adding 6.1 or 7.1 surround-back capability to an existing 5.1-channel home theater setup, for example.) The speakers’ gracefully contoured, high-rigidity enclosure is small enough to fit wherever you need it to go. An integrated ball-joint pedestal stand with bottom keyholes makes it easy to place the

RSX-4 on any convenient surface (walls included) and direct its sound into the listening area.

High frequencies emanate from a 1-inch t i t a n i u m d o m e c o m p r e s s i o n d r i v e r tweeter. The round MicroTractrix ™ Horn molded into the front of the cast aluminum baffle raises the driver’s efficiency and controls its radiation pattern to minimize detail-blurring reflections from walls, floor, and ceiling.

Energized by a high-intensity neodymium magnet, the RSX-4’s 4-inch Cerametallic ™ cone woofer generates bass that is both clean and remarkably strong for a speaker of this size. Low-frequency response extends deep enough to mesh seamlessly with the crossovers built into A/V receivers, surround processors, and powered subwoofers. As in all

Reference Series loudspeakers, premium crossover components ensure optimum signal transfer.

By virtue of their size and performance,

RSX-4s can serve a multitude of functions.

Standing alone, they are a great choice for remote speakers in a multiroom audio installation or stereo speakers in a minimalist music system. And with a Klipsch powered subwoofer handling low bass, they can deliver rich, full-range stereo or surround sound in a typical-size room.

■

High sensitivity

■

MicroTractrix Horn tweeter for clean, detailed highs

■

Ball-joint pedestal stand with keyholes allows easy placement

■

Integrates well with all Klipsch powered subwoofers

■

Magnetically shielded drivers to prevent video interference

S P E C I F I C A T I O N S

BANDWIDTH

SENSITIVITY

NOMINAL IMPEDANCE

CROSSOVER FREQUENCY

POWER HANDLING

ENCLOSURE TYPE

DRIVE COMPONENTS

WEIGHT

HEIGHT

WIDTH

DEPTH

FINISH

MOUNTING

92Hz-20kHz ± 3dB

90dB @ 2.83 volts/1 meter

8 ohms compatible

2300Hz

50 watts (200 watts peak)

Bass-reflex via rear-firing port

Two way system using one 1'' (2.5cm) magnetically shielded, titanium dome compression driver tweeter with an integral round 90˚ MicroTractrix Horn and one 4''

(10.2cm) magnetically shielded, Cerametallic cone woofer

4.5 lbs. (2kg) including base

10.2" (26cm) including base

5.6" (14.2cm)

7.8" (19.8cm)

Black or Silver

Base swivels 360˚ for on-wall mounting via keyholes www.klipsch.com

1-800-KLIPSCH

All specifications are subject to change without notice. ©2004