DATALOGIC DX6400 MASTER/SLAVE, ETHERNET bar code reader QUICK REFERENCE GUIDE

PDF

Dokument

DX6400

QUICK REFERENCE GUIDE

DX6400-100-010 MASTER/SLAVE MODEL ...........................................................................................................1

DX6400-100-012 ETHERNET MODEL ....................................................................................................................9

COMMON FEATURES ..........................................................................................................................................15

NOTE

For further details on product installation, see the complete Reference Manual available on the configuration CD-ROM included with this product.

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on to

www.automation.datalogic.com and click on the links indicated for further information including:

• PRODUCTS

Search through the links to arrive at your product page where you can download specific Manuals and

Software & Utilities including:

- Genius™ a utility program, which allows device configuration using a PC. It provides RS232 interface configuration.

• SERVICES & SUPPORT

- Datalogic Services - Warranty Extensions and Maintenance Agreements

- Authorised Repair Centres

• CONTACT US

E-mail form and listing of Datalogic Subsidiaries

DX6400-100-010 MASTER/SLAVE MODEL

DX6400 MASTER/SLAVE MODEL

Figure A

Laser Beam Output Window

5 1

4 3 2

Figure B

Programming Keypad

TX Data LED (Green)

3 Phase On LED (Yellow)

Power On LED (Red)

LCD Display

Available Models:

DX6400 - 100 - 0XX

Figure C

Main/Aux. Interface 25-pin D-sub Male Connector

Lonworks 9-pin Male Connector

Lonworks 9-pin Female Connector

Decoder Model

10 = Master/Slave

12 = Ethernet

Technical Features:

ELECTRICAL FEATURES

Supply voltage

Power consumption

Communication Interfaces

Inputs

External Trigger 1,

3 auxiliary digital inputs

Outputs

3 software programmable digital outputs

15 to 30 Vdc

18 W typical

24 W Max. (including startup current)

Main (isolated)

RS232

RS485 full-duplex

Baud Rate

1200 to 115200

1200 to 115200 RS485 half-duplex

20 mA Current Loop

(INT-30 with C-BOX 100 only)

19200

Auxiliary

RS232

Other

1200 to 115200

(optocoupled NPN or PNP)

(optocoupled)

DX6400 MASTER/SLAVE MODEL

OPTICAL FEATURES

Light receiver

Wavelength

Safety class

Light source

Laser control

READING FEATURES

Scan rate

Maximum resolution

Max. reading distance

Max. reading width

Max. depth of field

USER INTERFACE

LCD Display

Avalanche photodiode

630 to 680 nm

Class 2 - EN60825-1; Class II - CDRH

Up to 2 semiconductor laser diodes

Security system to turn laser off in case of motor slow down up to 1500 scans/s (750 per leg)

(see reading diagram)

2 lines by 16 characters LCD

LED indicators Power ON (red)

Phase ON (yellow)

TX data (green)

SOFTWARE FEATURES

Readable Codes Interleaved 2/5

Code 39 Standard

Codabar

EAN128

Code 93 (standard and full ASCII)

EAN/UPC EAN/UPC (including Add-on 2 and Add-on 5)

Code selection

Headers and Terminators

Up to 10 codes during one reading phase

Transmitted messages can be personalized using up to 128-byte headers and 128-byte terminators

Operating modes

Configuration modes

Parameter storage

On Line

Automatic

Test

PackTrack

Genius™ utility program

Non-volatile internal FLASH

ENVIRONMENTAL FEATURES

Operating temperature

Storage temperature

Humidity

Ambient light immunity

Vibration resistance

IEC 68-2-6 test FC

2 hours on each axis

Shock resistance

IEC 68-2-27 test EA

3 shocks on each axis

Protection class

PHYSICAL FEATURES

Mechanical dimensions

Weight

0° to +40 °C (+32° to +104 °F)

-20° to +70 °C (-4° to +158 °F)

90% non condensing

10000 lux

14 mm @ 2 to 10 Hz

1.5 mm @ 13 to 55 Hz

2 g @ 70 to 200 Hz

30 g; 11 ms

IP64

225.9 x 149.8 x 116.8 mm (8.89 x 5.90 x 4.60 in)

2.1 kg. (4.62 lbs)

DX6400 MASTER/SLAVE MODEL

Accessories:

Name Description

CAB-6305

CAB-6310

CAB-6502

CAB-6505

C-BOX 100

C-BOX 300

C-BOX 310

C-BOX 400

C-BOX 410

FBK-6000

INT-30

PH-1

MEP-543

PG6002

BTK-6000

CAB-6001

CAB-6002

CAB-6005

CAB-6010

CAB-6011

CAB-6012

CAB-6015

CAB-6101

CAB-6102

CAB-6105

CAB-6112

CAB-6115

PG6001

PG6000

PWR-120

PWR-240

PWR-480

OEK-2

Bus terminator kit (5 pcs)

25-pin scanner to C-BOX100 cable 1 m

25-pin scanner to C-BOX100 cable 2 m

25-pin scanner to C-BOX100 cable 5 m

25-pin scanner to C-BOX100 cable 10 m

26-pin scanner to C-BOX100 cable 1 m (Ethernet version)

26-pin scanner to C-BOX100 cable 2 m (Ethernet version)

26-pin scanner to C-BOX100 cable 5 m (Ethernet version)

9-pin scanner/scanner connection cable 1 m

9-pin scanner/scanner connection cable 2 m

9-pin scanner/scanner connection cable 5 m

9-pin scanner to scanner no power cable 2 m

9-pin scanner to scanner no power cable 5 m

25-pin power cable Fam 6k 5 m

25-pin power cable Fam 6k 10 m

Fam 6K-8K cross cable 2.5 m

Fam 6K-8K cross cable 5 m

Passive connection box

Profibus-DP connection box

Profibus-DP connection box with display

Devicenet connection box

Devicenet connection box with display

Fast bracket kit (2 pcs)

20 m.A. C.L. interface board for C-BOX 100

Photocell kit – PNP

Photocell kit - NPN

Single unit power supply (US)

Single unit power supply (UK)

Single unit power supply (EU)

J-box power unit 110/230 VAC 24 V 120 W

J-box power unit 110/230 VAC 24 V 240 W

J-box power unit 110/230 VAC 24 V 480 W

Optical encoder (10 m cable + spring)

OEK-1 Optical encoder kit + 10 m 93ACC1600

Electrical Connections:

The DX6400 reader provides a 25-pin male D-sub connector for connection to power supply, Host interface (Main and Aux), and input/output signals.

Two 9-pin connectors provide access to the scanner’s local Lonworks network used for both input and output connections to build a multi-sided or omni-station system.

93ACC1710

93A051190

93A051200

93A051210

93A051271

93A051221

93A051222

93A051223

93A051220

93A051230

93A051240

93A051224

93A051225

93ACC1768

93ACC1752

93A051288

93A051289

93ACC1510

93A301000

93A301030

93A301010

93A301040

93ACC1721

93A151022

93ACC1791

93ACC1728

93ACC1718

93ACC1719

93ACC1720

93ACC1530

93ACC1070

93ACC1080

93ACC1770

DX6400 MASTER/SLAVE MODEL

The details of the connector pins are indicated in the following table:

Pin Name

1 CHASSIS

20 RXAUX

21 TXAUX

8 OUT 1+

22 OUT 1-

25-pin D-Sub Connector Pinout

Function

Chassis - internally connected to GND

Cable shield connected to chassis

Receive data of auxiliary RS232 (referred to GND)

Transmit data of auxiliary RS232 (referred to GND)

Configurable digital output 1 – positive pin

Configurable digital output 1 – negative pin

12 OUT 2- Configurable digital output 2 – negative pin

1 13

18 EXT_TRIG/PS A External trigger (polarity insensitive) for PS

19 EXT_TRIG/PS B External trigger (polarity insensitive) for PS

6 IN2/ENC A

10 IN2/ENC B

Input signal 2 (polarity insensitive) for Encoder

14 IN3A

15 IN4A

24 IN_REF

9, 13 VS

23, 25 GND

Input signal 3 (polarity insensitive)

Input signal 4 (polarity insensitive)

Common reference of IN3 and IN4 (polarity insensitive)

Supply voltage – positive pin

Supply voltage – negative pin

14 25

25-pin male D-sub Connector

Pin RS232

2 TX

3 RX

4 RTS

5 CTS

7 GND_ISO

RS485 Full-Duplex RS485 Half-Duplex

20 mA C.L.

(INT-30 with C-BOX 100 only)

TX485+ RTX485+

TX485- RTX485-

GND_ISO GND_ISO

* Do not leave floating, see Reference Manual for connection details.

9-pin Lonworks Connector Pinout

Pin Name Function

1 CHASSIS

GND

6 VS_I/O

3 Ref_I/O

Cable shield internally connected by capacitor to chassis

Supply voltage – positive pin

Supply voltage – negative pin

Supply voltage of I/O circuit

Reference voltage of I/O circuit

5 1 1 5

Female

6 6

Male

9-pin Local Lonworks Connectors

5 SYS_I/O

7 LON A

8 LON B

Lonworks line (polarity insensitive)

Network Termination:

When building a local Lonworks system the network must be properly terminated by positioning a BTK-6000 terminator on the DX6400 master reader (BTK-6000 female side) and on the last slave reader (BTK-6000 male side). to Master to Slave

9-pin female 9-pin male

BTK-6000 Network Terminator

Connectivity:

CAB-600X

Point-to-Point Layout

C-BOX 100

DX6400

DX6400 MASTER/SLAVE MODEL

Local Host

P.S.*

PG6000

* P.S. (Presence Sensor) connected to External Trigger/PS input.

Pass Through Layout

P.S.* P.S.*

DX6400

DS4600A

P.S.*

CAB-600X

C-BOX 100

MAIN

AUX

Local Host

C-BOX 100

1 2

PWR-120

1 Main Serial Interface 2 Auxiliary Serial Interface

* P.S. (Presence Sensor) connected to External Trigger/PS input.

C-BOX 100

DS4600A

Gryphon

P.S.* P.S.*

Multiplexer Layout

P.S.*

DX6400 MASTER/SLAVE MODEL

DX6X00

CAB-600X

C-BOX 100

DS4600A

C-BOX 100

DS4600A

PWR-120

C-BOX 100

MX4000

#31 #1 #0

Local Host

1 RS485 HD Main Interface

* P.S. (Presence Sensor) connected to External Trigger/PS input.

RS232 Master/Slave Layout

DX6400

Master

CAB-600X

DS4600A

Slave 1

P.S.*

C-BOX 100

AUX

MAIN

C-BOX 100

DS4600A

Slave 2

C-BOX 100

PWR-120

1 Main Serial Interface 2

Auxiliary Serial Interface

* P.S. (Presence Sensor) connected to External Trigger/PS input.

Local Host

CAB-610X

DX6400 MASTER/SLAVE MODEL

Local Lonworks Network

CAB-60XX

BTK-6000 C-BOX 100**

Master

Slave 1

P.S.*

CAB-63XX

BTK-6000

PWR-120

Small Synchronized Network with 2 readers

* P.S. (Presence Sensor) connected to External Trigger/PS input.

** C-BOX 100 modified to accept scanner power.

*** Encoder connected to IN2/ENC input.

Local Lonworks Network

Slave 2 Slave1 Master

Encoder***

Local Host

CAB-610X

BTK-6000

CAB-60XX

C-BOX 100**

Host

PS*

Encoder***

CAB-63XX

BTK-6000

PWR-240

Slave 5

Slave 4 Slave 3

CAB-63XX

Small Synchronized Network with more than 2 Readers and Single Power Unit

* P.S. (Presence Sensor) connected to External Trigger/PS input.

** C-BOX 100 modified to accept scanner power. connected to IN2/ENC input.

Large Synchronized Network

DX6400 MASTER/SLAVE MODEL

P.S. (Presence Sensor) connected to External Trigger/PS input.

Encoder connected to ENC input.

Large Synchronized Network with DX6400 and DS6XXX Scanners

DX6400-100-012 ETHERNET MODEL

DX6400 ETHERNET MODEL

Figure A

Laser Beam Output Window

4 3 2

Figure B

Programming Keypad

TX Data LED (Green)

3 Phase On LED (Yellow)

4 Power On LED (R

5 LCD Display

Available Models:

DX6400 - 100 - 0XX

Figure C

RJ45 Modular Connector for Ethernet Interface

Lonworks 9-pin Female Connector

Main/Aux. Interface 26-pin D-Sub Male Connector

Decoder Model

10 = Master/Slave

12 = Ethernet

Technical Features:

ELECTRICAL FEATURES

Supply voltage

Power consumption

Communication Interfaces

15 to 30 Vdc

18 W typical

24 W Max. (including startup current)

Main (isolated) Baud Rate

RS232

RS485 full-duplex

RS485 half-duplex

20 mA Current Loop

(INT-30 with C-BOX 100 only)

1200 to 115200

19200

Auxiliary

RS232

Other

1200 to 115200

Model–Dependent Communication

Interfaces

Inputs

External Trigger 1,

3 auxiliary digital inputs

Outputs

3 software programmable digital outputs

Ethernet 10 or 100 Mb/s

(optocoupled NPN or PNP)

(optocoupled)

DX6400 ETHERNET MODEL

OPTICAL FEATURES

Light receiver

Wavelength

Safety class

Light source

Laser control

READING FEATURES

Scan rate

Maximum resolution

Max. reading distance

Max. reading width

Max. depth of field

USER INTERFACE

LCD Display

Avalanche photodiode

630 to 680 nm

Class 2 - EN60825-1; Class II - CDRH

Up to 2 semiconductor laser diodes

Security system to turn laser off in case of motor slow down up to 1500 scans/s (750 per leg)

(see reading diagram)

2 lines by 16 characters LCD

LED indicators Power ON (red)

Phase ON (yellow)

TX data (green)

SOFTWARE FEATURES

Readable Codes Interleaved 2/5

Code 39 Standard

Codabar

EAN128

Code 93 (standard and full ASCII)

EAN/UPC EAN/UPC (including Add-on 2 and Add-on 5)

Code selection

Headers and Terminators

Up to 10 codes during one reading phase

Transmitted messages can be personalized using up to 128-byte headers and 128-byte terminators

Operating modes

Configuration modes

Parameter storage

On Line

Automatic

Test

PackTrack

Genius™ utility program

Non-volatile internal FLASH

ENVIRONMENTAL FEATURES

Operating temperature

Storage temperature

Humidity

Ambient light immunity

Vibration resistance

IEC 68-2-6 test FC

2 hours on each axis

Shock resistance

IEC 68-2-27 test EA

3 shocks on each axis

Protection class

PHYSICAL FEATURES

Mechanical dimensions

Weight

0° to +40 °C (+32° to +104 °F)

-20° to +70 °C (-4° to +158 °F)

90% non condensing

10000 lux

14 mm @ 2 to 10 Hz

1.5 mm @ 13 to 55 Hz

2 g @ 70 to 200 Hz

30 g; 11 ms

IP50

225.9 x 149.8 x 116.8 mm (8.89 x 5.90 x 4.60 in)

2.1 kg. (4.62 lbs)

DX6400 ETHERNET MODEL

Accessories:

Name Description

CAB-6305

CAB-6310

CAB-6502

CAB-6505

C-BOX 100

C-BOX 300

C-BOX 310

C-BOX 400

C-BOX 410

FBK-6000

INT-30

PH-1

MEP-543

PG6002

BTK-6000

CAB-6001

CAB-6002

CAB-6005

CAB-6010

CAB-6011

CAB-6012

CAB-6015

CAB-6101

CAB-6102

CAB-6105

CAB-6112

CAB-6115

PG6001

PG6000

PWR-120

PWR-240

PWR-480

OEK-2

Bus terminator kit (5 pcs)

25-pin scanner to C-BOX100 cable 1 m

25-pin scanner to C-BOX100 cable 2 m

25-pin scanner to C-BOX100 cable 5 m

25-pin scanner to C-BOX100 cable 10 m

26-pin scanner to C-BOX100 cable 1 m (Ethernet version)

26-pin scanner to C-BOX100 cable 2 m (Ethernet version)

26-pin scanner to C-BOX100 cable 5 m (Ethernet version)

9-pin scanner/scanner connection cable 1 m

9-pin scanner/scanner connection cable 2 m

9-pin scanner/scanner connection cable 5 m

9-pin scanner to scanner no power cable 2 m

9-pin scanner to scanner no power cable 5 m

25-pin power cable Fam 6k 5 m

25-pin power cable Fam 6k 10 m

Fam 6K-8K cross cable 2.5 m

Fam 6K-8K cross cable 5 m

Passive connection box

Profibus-DP connection box

Profibus-DP connection box with display

Devicenet connection box

Devicenet connection box with display

Fast bracket kit (2 pcs)

20 m.A. C.L. interface board for C-BOX 100

Photocell kit – PNP

Photocell kit - NPN

Single unit power supply (US)

Single unit power supply (UK)

Single unit power supply (EU)

J-box power unit 110/230 VAC 24 V 120 W

J-box power unit 110/230 VAC 24 V 240 W

J-box power unit 110/230 VAC 24 V 480 W

Optical encoder (10 m cable + spring)

OEK-1 Optical encoder kit + 10 m 93ACC1600

Electrical Connections:

The DX6400 Ethernet reader provides a 26-pin male D-sub connector for connection to power supply and input/output signals.

An Ethernet connector is used for connection to the remote Host (for ex. Remote PC connected via Internet), while a local Lonworks 9-pin female connector connects the Ethernet master to the first slave reader of the system.

The details of the connector pins are indicated in the following table:

93ACC1710

93A051190

93A051200

93A051210

93A051271

93A051221

93A051222

93A051223

93A051220

93A051230

93A051240

93A051224

93A051225

93ACC1768

93ACC1752

93A051288

93A051289

93ACC1510

93A301000

93A301030

93A301010

93A301040

93ACC1721

93A151022

93ACC1791

93ACC1728

93ACC1718

93ACC1719

93ACC1720

93ACC1530

93ACC1070

93ACC1080

93ACC1770

DX6400 ETHERNET MODEL

Pin Name

1 CHASSIS

RXAUX

TXAUX

OUT 1+

OUT 1-

26-pin D-Sub Connector Pinout

Function

Chassis - internally connected to GND

Cable shield connected to chassis

Receive data of auxiliary RS232 (referred to GND)

Transmit data of auxiliary RS232 (referred to GND)

Configurable digital output 1 – positive pin

Configurable digital output 1 – negative pin

12 OUT 2- Configurable digital output 2 – negative pin

19 26

EXT_TRIG/PS A External trigger (polarity insensitive) for PS

EXT_TRIG/PS B External trigger (polarity insensitive) for PS

IN2/ENC A

IN2/ENC B

Input signal 2 (polarity insensitive) for Encoder

IN3A

IN4A

24 IN_REF

9, 13 VS

23, 25, 26 GND

Input signal 3 (polarity insensitive)

Input signal 4 (polarity insensitive)

Common reference of IN3 and IN4 (polarity insensitive)

Supply voltage – positive pin

Supply voltage – negative pin

26-pin male D-sub Connector

Pin RS232 RS485 Full-Duplex RS485 Half-Duplex

20 mA C.L.

(INT-30 with C-BOX 100 only)

2 TX TX485+ RTX485+

3 RX *

4 RTS TX485- RTX485-

5 CTS *

7 GND_ISO GND_ISO GND_ISO

* Do not leave floating, see Reference Manual for connection details.

9-pin Lonworks Connector Pinout

Pin Name

1 CHASSIS

GND

VS_I/O

3 Ref_I/O

5 SYS_I/O

LON A

LON B

Function

Cable shield internally connected by capacitor to chassis

Supply voltage – positive pin

Supply voltage – negative pin

Supply voltage of I/O circuit

Reference voltage of I/O circuit

Lonworks line (polarity insensitive)

5 1

9 6

9-pin female Local Lonworks Connector

DS6400 HUB / SWITCH

RJ45 Modular Connector

TX+

TX-

1 8

3 3 RX+ n. c. n. c.

RX- n. c.

RJ45 Modular Connector n. c. 8 8 n. c. = not connected

Connectivity:

C-BOX 100

CAB-601X

Point-to-Point Layout

Fieldbus

Network

DX6400

DX6400 ETHERNET MODEL

Remote Host

P.S.*

PG6000

* P.S. (Presence Sensor) connected to External Trigger/PS input.

Pass Through Layout

Remote Host

P.S.* P.S.* P.S.*

Fieldbus

Network

DX6500

CAB-601X C-BOX 100

AUX

PWR-120

C-BOX 100

DS4600A

1 Main Serial Interface 2 Auxiliary Serial Interface

* P.S. (Presence Sensor) connected to External Trigger/PS input.

C-BOX 100

DS4600A

Gryphon

Slave 2*** Slave1***

Local Lonworks Network

Fieldbus

Network

Master

DX6400 ETHERNET MODEL

Remote Host

C-BOX 100**

CAB-610X CAB-610X CAB-60XX

CAB-610X

BTK-6000

PS*

Encoder****

CAB-610X CAB-610X

CAB-63XX

PWR-240

Slave 5*** Slave 4*** Slave 3***

CAB-63XX

Fieldbus Small Synchronized Network

P.S. (Presence Sensor) connected to External Trigger/PS input.

C-BOX 100 modified to accept scanner power.

*** The Slave scanners are Master/Slave models, which allow Lonworks network propagation.

**** Encoder connected to IN2/ENC input.

COMMON FEATURES

C-BOX 100 Pinout for DX6400:

The table below gives the pinout of the C-BOX 100 terminal block connectors. Use this pinout when the DX6400 reader is connected in a network by means of the C-BOX 100:

C-BOX 100 Terminal Block Connectors

1, 3, 5

2, 4, 6

7, 8

20, 40

31, 33

32, 34

Power

GND

EARTH GROUND

Reserved

Inputs

EXT TRIG/PS A (polarity insensitive) for PS

EXT TRIG/PS B (polarity insensitive) for PS

IN 2/ENC A (polarity insensitive) for Encoder

IN 2/ENC B (polarity insensitive) for Encoder

IN 3A (polarity insensitive)

IN 4A (polarity insensitive)

IN 3B/IN 4B Reference (polarity insensitive)

Outputs

OUT 3A (polarity insensitive)

OUT 3B (polarity insensitive)

Auxiliary Interface

38, 39 GND

Main Interface

RS232

RS485

Full-Duplex

RS485

Half-Duplex

11, 15

12, 16

TX232

RTS232

TX485+

TX485-

17 RX232 *

RTX485+

RTX485-

18 CTS232

10, 14, 19 SGND Main Isolated

SGND Main Isolated SGND Main Isolated

9, 13 RS485 Cable Shield RS485 Cable Shield

* Do not leave floating, see Reference Manual for connection details.

20 mA C.L.

(with INT-30 only) see INT-30 instructions

COMMON FEATURES

Mechanical Installation:

The DX6400 reader can be positioned and installed in the best way possible as a result of the Step-A-Head

TM feature. Thanks to the separation between Head and Base, you can modify the orientation of the decoder base, and therefore display-keypad and connector panels, while keeping the optic head in the correct reading position.

The reading head and the decoder base can be rotated independently from each other allowing the installation even in the most critical locations.

To rotate the head follow the given procedure:

Head Screws

1. detach the head from the base by unscrewing the four fixing screws;

2. rotate the head in the desired position;

3. loosen but don't remove the two screws on top of the head;

4. affix the head onto the base carefully aligning the four fixing screws and progressively tightening them about half-way;

5. completely tighten the two screws on top of the head;

Fixing

Screw (4)

6. completely tighten the four fixing screws. Step- A-Head™ Feature

The following diagrams give the overall dimensions of the reader standard model, oscillating mirror model and mounting bracket. They may be used for their installation:

115.9

[4.56]

125.3

[4.93]

225.9

[8.89]

[3.35]

16.5

[0.65]

18 0.7

82 3.2

20 0.7

Ø4

Ø0

N°

.16

N°

0.4

1.65

0.86

1.96

2.83

100

3.93

8.5 N°

2 SLO

LOTS

0.33

N°2 S

Ø8

Ø0

.33

4.5

N°

4 S

0.1

8 N

°4

35 1.

50 1.9

82 3.

4.9

106°

73.2

2.88

mm inch

0.15

DX6400 Overall Dimensions ST-237 Mounting Bracket Overall Dimensions

COMMON FEATURES

Mount the scanner using the ST-237 mounting bracket which assures an angle of 16°, as indicated in the figure below, in order to obtain an angle of 90° between the two scan lines. This guarantees an omni directional reading of the barcode, if the code label satisfies the ACR™ 4 conditions (see Scanner Reference Manual for details).

DX6400 Mounting Position

WARNING

When installing several scanners, take care to position them correctly so that no laser beam enters the reading window perpendicularly and at the same level of the output beam of the other scanners. This condition could occur more frequently for side mounted applications. If these precautions are not followed, it may occur that the laser of the blinded scanner starts blinking due to an internal circuit which temporarily turns the laser off when detecting a power anomaly. To resolve this problem, it is sufficient to slightly change the inclination and position of one of the two scanners involved.

FLASH™ Dynamic Focus:

The DX6400 has an innovative linear motor designed to control the focus position of the scanner via software.

This dynamic system, called FLASH™, is able to move the focus position rail to rail, from the minimum position to the maximum position.

The FLASH™ functionalities (i.e. the driving modes of the linear motor) are programmed via the Genius™ software tool and can operate in the following modes:

- Fixed mode: the focus is set to the desired position via software (expressed in cm);

- Continuous mode: the focus position is continuously running from a minimum position to a maximum position with a defined frequency;

- Triggered mode: the focus position can be set depending on the received external input (photocell, barrier, serial message, etc.);

- D-Flash™ mode: the focus position can be set depending on the measured distance between the scanner and the scanned object. This is the most innovative and flexible function that makes different software implementations possible. The D-Flash™ development has been based on the minimum distance detected.

Thus, it can apply to the widest variety of applications. Further developments of D-Flash™ will be provided according to the specific application needs.

COMMON FEATURES

Reading Conditions:

• ANSI Grade B minimum

• 600 scans/sec per leg

The following tables describe the requirements for standard applications.

2/5 Inteleaved

Code Resolution (mm)

Minimum Code Height for Omnidirectional Reading (mm)

0.5 1 1.5 2 2.5 3

0.38

0.50

0.60

1.00

14 16 18 20 22 24

18 19 21 23 25 27

21 22 24 26 28 30

34 35 36 37 39 41

Table 1

Code 39

Code Resolution (mm)

Minimum Code Height for Omnidirectional Reading (mm)

0.5 1 1.5 2 2.5 3

0.38

0.50

0.60

1.00

12 13 15 17 19 21

15 16 17 19 21 24

18 19 20 21 23 26

28 29 30 31 32 34

Table 2

Code 128 – Ean 128

Code Resolution (mm)

Minimum Code Height for Omnidirectional Reading (mm)

0.5 1 1.5 2 2.5 3

0.38

0.50

0.60

1.00

10 12 14 16 18 20

12 13 16 18 20 22

14 15 17 19 21 24

22 23 24 26 28 30

Table 3

Codabar

Code Resolution (mm)

Minimum Code Height for Omnidirectional Reading (mm)

0.5 1 1.5 2 2.5 3

0.38

0.50

0.60

1.00

16 18 20 22 24 26

20 22 24 26 28 30

23 25 27 29 31 34

36 38 40 42 44 47

Table 4

EAN 8-13, UPC-A

Code Resolution (mm)

Minimum Code Height for Omnidirectional Reading (mm)

0.5 1 1.5 2 2.5 3

0.38

0.50

0.60

1.00

11 12 13 15 17 19

13 14 15 16 18 20

15 16 17 18 19 22

24 25 26 27 28 29

Table 5

COMMON FEATURES

Reading Diagrams:

DX6400-100-0XX – Resolution: 0.38 mm/15 mils

0 -20 -30

-40

0 -40 -50 -60 -70 -80

-40 -50 -60 -70

-90 -100 -110 -120 -130 -140 -150 -160 -170 -180 (cm) z

-10

-30

-20

-10

0 0

10 x 20

(in) (cm)

Note: x = 0 and z = 0 correspond to the edge of the DX6400 scanner as shown in the figure above.

CONDITIONS

Code = Interleaved 2/5 or Code 39

PCS = 0.90

DX6400-100-0XX – Resolution: 0.50 mm/20 mils

0 -20 -30

-40

0 -40 -50 -60 -70 -80

-40 -50 -60 -70 (in)

-90 -100 -110 -120 -130 -140 -150 -160 -170 -180 (cm) z x

-10

-30

-20

-10

0 0

(in) (cm)

Note: x = 0 and z = 0 correspond to the edge of the DX6400 scanner as shown in the figure above.

CONDITIONS

Code = Interleaved 2/5 or Code 39

PCS = 0.90

COMMON FEATURES

User Interface:

1 5

RS232 PC-side connections

1 13

6 9

9-pin male connector

14 25

25-pin male connector

Pin Name Name

2 RX RX

3 TX TX

5 GND GND

7 RTS RTS

8 CTS CTS

How To Build A Simple Interface Test Cable:

The following wiring diagram shows a simple test cable including power, external (push-button) trigger and PC

RS232 COM port connections.

25-pin D-sub female 9-pin D-sub female

DX6400

21 TXAUX

20 RXAUX

23 GND

13 VS

25 GND

9 VS

18 EXT TRIG A

19 EXT TRIG B

Power Supply

VS (15 – 30 VDC)

Power GND

GND

Trigger

Compliance:

Laser Safety

Figure A

Laser Safety Label

2 Identification Label

Figure B

Warning and Device Class Label

COMMON FEATURES

The scanner is classified as a Class 2 laser product according to EN 60825-1 regulations and as a Class II laser product according to CDRH regulations.

Disconnect the power supply when opening the device during maintenance or installation to avoid exposure to hazardous laser light.

There is a safety device which allows the laser to be switched on only if the motor is rotating above the threshold for its correct scanning speed.

The laser beam can be switched off through a software command (see also the Genius™ Help On-Line).

AVOID EXPOSURE – LASER LIGHT

IS EMITTED FROM THIS APERTURE

Laser Safety Label

CAUTION-CLASS 3B

LASER LIGHT

WHEN OPEN

AVOID EXPOSURE

TO BEAM

LASER LIGHT – DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

MAX. OUTPUT RADIATION 1 mW

EMITTED WAVE LENGTH 630 ~ 680 nm

EN60825-1:2001

DATALOGIC S.p.A. Via Candini, 2

40012 LIPPO DI CALDERARA DI RENO (BO) ITALY

MANUFACTURED VOLT Amp.

JANUARY 2005 15-30 DC 1.5-0.7

MODEL No. N2468

SERIAL No.

This product conforms to the applicable requirements of 21CFR 1040 at the date of manufacture.

Warning and Device Class Label Device Identification Label

The laser diode used in this device is classified as a Class 3B laser product according to EN 60825-1 regulations and as a Class IIIb laser product according to CDRH regulations. Any violation of the optic parts in particular can cause radiation up to the maximum level of the laser diode (35 mW at 630 ~ 680 nm).

Power Supply

- This product is intended to be installed by Qualified Personnel only.

- All DX6400 Models:

This device is intended to be supplied by a UL Listed Power Unit marked “Class 2” or LPS power source which supplies power directly to the scanner via the 25/26-pin connector.

CE Compliance

Warning:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Patents

This product is covered by one or more of the following patents:

U.S. patents: 5,483,051; Re. 36,251; 6,049,406; 5,992,740; 6,347,740B1; 6,629,639B2; 6,394,352B1;

6,742,710B2; 7,161,685B1; 6,688,524B1; 6,443,360 B1; 7,195,162B2.

European patents: 652,530B1; 786,734B1; 789,315B1; 851,376B1; 1,363,228B1; 959,426B9; 1,300,798B1.

Additional patents pending.

DECLARATION OF CONFORMITY

Datalogic Automation S.r.l.

Via S. Vitalino 13

40012 - Lippo di Calderara

Bologna - Italy dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el

DX6400-XXX-XXX, Laser Scanner; e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos sono conformi alle Direttive del Consiglio Europeo sottoelencate: are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: der nachstehend angeführten Direktiven des Europäischen Rats: cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

89/336/EEC EMC Directive e et ses successifs amendements

2006/95/EC Low Voltage Directive

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.

On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.

Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

EN 55022 (Class A ITE), August 1994:

Amendment A1 (Class A ITE), October 2000:

L IMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE

CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT

EN 61000-6-2, October 2001: E LECTROMAGNETIC COMPATIBILITY (EMC)

P ART 6-2: G ENERIC S TANDARDS - I MMUNITY FOR INDUSTRIAL

ENVIRONMENTS

EN 60950-1, December 2001: I NFORMATION TECHNOLOGY EQUIPMENT – S AFETY –

P ART 1: G ENERAL R EQUIREMENTS

EN 60825-1, June 1994: S AFETY OF LASER PRODUCTS –

Amendments A11 (1996), A2 (2001): P ART 1: E QUIPMENT CLASSIFICATION , REQUIREMENTS AND USER ' S GUIDE

Lippo di Calderara, April 2nd, 2007 Lorenzo Girotti

Product & Process Quality Manager

821001213 (Rev. D)

Hallo! Ich bin ein KI-Chatbot, der speziell dafür ausgebildet wurde, Ihnen bei der Datalogic DX6400 MASTER/SLAVE Referenzhandbuch zu helfen. Ich habe das Dokument gründlich gelesen und kann Ihnen helfen, die benötigten Informationen zu finden oder den Inhalt klar und einfach zu erklären. Egal, ob Sie nach Anleitungen zu bestimmten Funktionen, Problemlösungen oder allgemeinen Nutzungshinweisen suchen, zögern Sie nicht, Ihre Fragen zu stellen. Je mehr Details Sie zu Ihren Anliegen oder Bedürfnissen bereitstellen, desto genauer und effektiver kann ich Ihnen helfen!

Assistent tippt

Assistent ist nicht an der Tastatur. Bitte versuchen Sie es später noch einmal.

Es sieht so aus, als ob Sie ein Dokument erreicht haben, das in mehreren Sprachen verfasst ist, einschließlich einer Sprache, die nicht Ihre Muttersprache ist. Sie können die folgenden Links verwenden, um Seiten ohne die von Ihnen bevorzugte Sprache vorübergehend auszublenden.

DX6400

QUICK REFERENCE GUIDE

CONTENTS

SERVICES AND SUPPORT

DX6400-100-010 MASTER/SLAVE MODEL

Available Models:

Technical Features:

Accessories:

Electrical Connections:

Network Termination:

Connectivity:

DX6400-100-012 ETHERNET MODEL

Available Models:

Technical Features:

Accessories:

Electrical Connections:

Connectivity:

COMMON FEATURES

C-BOX 100 Pinout for DX6400:

Mechanical Installation:

FLASH™ Dynamic Focus:

Reading Conditions:

Reading Diagrams:

User Interface:

How To Build A Simple Interface Test Cable:

Compliance:

DECLARATION OF CONFORMITY

Verwandt

Datalogic DX6400 Laser Scanner Reference Manual | AI Chat

Datalogic DX6400, DX6500 Reference Manual

Datalogic DX6400 Quick Reference Guide | AI Chat & PDF

Datalogic DX6400 Quick Reference Manual

DX6400 Reference Manual

DS6500 Barcode Reader Installation Guide

DS6400 Quick Reference Guide

Datalogic Matrix-1000 Quick Guide: AI Chat & PDF

DS6300 Barcode Scanner Quick Reference Guide

Datalogic Scanning Scanner DS6500 User manual

Datalogic DS6300 Reference Manual

Datalogic DS6300 Reference Manual