2015 Mitsubishi Outlander

2015 OUTLANDER www.mitsubishicars.com

ACAD-P08000 (6/14)

Dieline -DO NOT PRINT!

2015 OUTLANDER

Owner’s Handbook

PLEASE PLACE COPIES OF THE FOLLOWING ITEMS IN THE POCKET BELOW:

1. Pre-Delivery Inspection Form (Customer Copy)

2. Triple Diamond Delivery Checklist (Customer Copy)

3. Salesperson or Key Dealership Contact’s Business Card

Handbook Owner’s

2015 OUTLANDER

2015 OUTLANDER

.com

6/14)

www.mitsubishicars

ACAD-P08000 (

Dieline -DO NOT PRINT!

Thank you for buying a Mitsubishi Outlander. There’s no doubt you’ve already realized how well your car drives on the open road. What you may not know is all the great features that help your car perform the way it does. In the pages ahead we’re going to run through the basics and prepare you for the road.

We’d also love to hear from you about your overall Mitsubishi experience. If you haven’t already, please log on to

www.MitsubishiSSIsurvey.com and tell us how we did. This will help

us make sure your next visit is that much better.

We hope you will visit the Mitsubishi Owner’s site where we store the latest Mitsubishi news and special offers. Here you can also keep track of your car’s warranty and servicing needs, get Roadside Assistance Information and tap into other owner-centric details. Just log on to

www.Mitsubishicars.com/ownersonly.

Table of Contents

Driver’s View ..................... Page 2-3

Controls ............................ Page 4-5

Own the Road ................... Page 6

Switches ........................... Page 7

ECO Driving ...................... Page 8

Folding and Stowing the Second and Third

Row Seat .......................... Page 9

Technology ...................... Page 10

Audio System .................... Page 11

Display Audio System

(if equipped) ..................... Page 12-13

Bluetooth ® ........................ Page 14

FAQ’s ................................ Page 15-16

1

2

Driver’s View

1 Climate Controls ................................... Page 4

2 Headlights ........................................... Page 4

3 Side

4 Windshield Wiper Lever ........................ Page 5

5 Adaptive Cruise Control (if equipped) ... Page 6

6 AWC (All Wheel Control) Button ............ Page 6

7 Paddle Shifters (GT only) ..................... Page 6

8 Seat Heater Switch (if equipped) ......... Page 6

9 Lane Departure Warning (LDW) and

Forward Collision Mitigation (FCM)

(if equipped) ........................................ Page 7

10 Power Liftgate Main Switch

(if equipped) ........................................ Page 7

11 ECO Mode Switch ................................ Page 8

12 Multi Information Display (MID) ............ Page 10

13 Start/Stop Engine Switch

(if equipped with F.A.S.T.-key) .............. Page 10

14 Audio Remote Control Buttons ............. Page 11

15 Display Audio/Navigation

(if equipped) ........................................ Page 12-13

16 Bluetooth ® Controls .............................. Page 14

3 9

2 7

14

16

12

15

5

7

13

4

10

1

11

8

6

3

4

CONTROLS

Regular Headlights Automatic Headlights (if equipped)

AUTO

OFF

Headlights and other lights on.

Parking, tail, front and rear sidemarker lights, license plate and instrument panel lights on.

Headlights and other lights turn on and off automatically in accordance with outside light level.

All lights off

Pull lever toward driver to activate high beams.

Dual-Zone Automatic Climate Controls (if equipped)

A A

C D E

B F G H

A - Push to select the desired temperature

B - Push to select outside air (Indicator light off) or recirculated air (Indicator light on)

C - Push for air conditioning ON/OFF

D - Push to select the blower speed

E - Push to select the position of air flowing from the vents

F - Push to defog windshield.

G - When the AUTO switch is pushed, the settings are automatically controlled.

Passenger’s side temperature will be changed to the same temperature set as the driver’s side

H - Push to defog the rear windows.

Windshield Wipers

The wipers will operate once.

INT: Intermittent intervals can be adjusted by turning the knob A

AUTO: The wipers will be operated automatically by rain sensor

(if equipped).

Slow

Fast

Rear Window Wiper and Washer

Turn the knob B to operate the rear window wiper.

The wiper operates continuously for several seconds then operates intermittently at intervals of about 8 seconds.

Washer fluid is sprayed, the wiper will automatically operate 2 or 3 times.

CONTROLS (continued)

Side Mirror Adjustment

A

The outside rearview mirrors can be adjusted when the ignition switch is in the

“ON” or “ACC” position or the operation mode is put in ON or ACC.

Move the lever (A) to the same side as the mirror you wish to adjust.

5

Adjust switch

6

OWN THE ROAD

Paddle Shifters (GT only)

– :SHIFT DOWN + :SHIFTUP

Simply upshift or downshift with a tap of your fingers – without moving your hands from the steering wheel.

You can return to the “D” operation by pulling the +

(SHIFT UP) side paddle shifter rearwards (toward the driver) and holding for over 2 seconds.

Drive Mode Selector (if equipped)

The drive mode can be switched by pressing the drive mode button while the ignition switch is in the ON position.

Pressing the button will change the drive mode in order to:

AWC ECO, NORMAL, SNOW, LOCK

Seat Heater Switch (if equipped)

Position - Action

(HI)

(NEUTRAL) - Heater off

(LO)

- For quick heating

- To keep the seat warm

Adaptive Cruise Control (if equipped)

A

B

D

C

A - CANCEL: To deactivate the ACC or cruise control

B - RES +: To increase the set speed or resume control after cancelling the

ACC or cruise control function.

C - SET-: To set the desired speed and to reduce the set speed.

D - ON / OFF: To turn cruise control ON or OFF

E - ACC Distance Switch - Used to set or change the following distance between your vehicle and the vehicle in front of you.

To set a cruising speed

1. Press E D and the “ACC” (if equipped) or “CRUISE” indicators will appear in the multi information display.

2. Accelerate or decelerate to your desired speed (above 25 mph). Press C and remove your

To accelerate or decelerate speed

foot from the accelerator pedal.

Push up B to increase set cruising speed.

Push down C to decrease set cruising speed.

To cancel the cruising speed Press A or press brake pedal, or press D .

Active Stability Control (ASC) Off Switch

You can deactivate the system by pressing down the “ASC OFF” switch for

3 seconds or longer.

When the ASC is deactivated, the display/indicator will turn on. To reactivate the ASC, momentarily press the “ASC OFF” switch; the display/ indicator is turned off.

SWITCHES

Lane Departure Warning (LDW) Switch (if equipped)

7

When you press the LDW switch, the “LDW” indicator on the information screen of the multi information display turns OFF and the LDW system is inactive.

Press the switch again, the system will activate.

Power Liftgate Main Switch (if equipped)

When the power liftgate main switch (located in the lower center dash area) is ACTIVE, the power liftgate can be operated using either the power liftgate switch on the F.A.S.T.-key, the driver’s side power liftgate switch or the open/close switches on the power liftgate.

Forward Collision Mitigation (FCM) Switch (if equipped)

Power Liftgate Switch (if equipped)

The power liftgate can be opened by pressing the Power Liftgate Switch.

Every time the operation mode is turned to “ON”, the FCM will automatically be turned on.

To turn off the FCM, press and hold the FCM switch. A buzzer will sound and the “FCM OFF” message and indicator will appear in the multi information display.

To change the warning distance mode, briefly press the FCM switch.

8

ECO DRIVING

ECO indicator

This indicator will be displayed when fuel efficient driving is achieved.

ECO Drive Assist

ECO drive level

Multi information display switch

ECO Score

ECO drive level

Low

Low High

This function displays how fuelefficiently you are driving under different driving conditions.

To show, press the multi information display switch.

High

ECO score indicates the points you have scored on fuel-efficient driving by the number of leaves.

To show, press the multi information display switch.

ECO mode switch

ECO mode is an eco-driving support system which automatically controls the engine, air conditioning system,

4WD system (if equipped) and

S-AWC (if equipped) to improve fuel efficiency.

To activate, press the ECO mode switch.

Momentary fuel consumption display

While driving, the momentary fuel consumption is shown with a bar graph.

The “



” mark in the momentary fuel gauge shows the average fuel consumption.

When the momentary fuel consumption surpasses the average fuel consumption, the momentary fuel consumption is displayed with a green bar graph.

Maintaining your fuel consumption above the average fuel consumption point will help increase your mileage per gallon.

To show, press the multi information display switch.

Tire Pressure Monitoring System (TPMS)

The Tire Pressure Monitoring System light illuminates when one or more of your tires is significantly under inflated. Please note that changes in the outside temperature may decrease tire pressure causing the

TPMS light to turn on. If the TPMS light remains illuminated, check your tire pressure.

If the warning light illuminates, take the necessary measures referring to the owner’s manual.

Folding the second row seats

1. Slide the seat all the way to the rear by pulling up on the sliding lever located under the bottom of the seat and pushing to the back.

2. Pull up on the front edge of the bottom seat cushion and raise it up.

Then lift the back side of the bottom seat cushion up and flip it over toward the front side as you rotate the bottom seat cushion into the foot well area.

3. Once the seat cushion is flipped forward, slide the lever (A) which is now visible, forward into the “seat flat” position to lock the seats down.

A

4. Remove the headrests by pushing the button on the headrest post and then lifting up on the headrest simultaneously. Place the headrest out of the way. (The middle headrest can remain in the lowest position).

5. Now pull the lever on the top of the backrest (B) and lower the seat forward so it lays flat.

6. Grab the headrest and face it forward. Find the slit on the bottom rear of the headrest and place it on the metal hook located on the middle part of the folded seat cushion (C). Place your other hand on the back of the headrest and gently push it down until you hear and or feel it lock into place.

C

B

FOLDING AND STOWING THE SECOND AND THIRD ROW SEAT

Unfolding the second row seats

1. Remove Headrests from storage hook on folded seat cushion.

2. Raise the seatback until it locks into place.

3. Make sure the seat belt buckles are up (D) (Figure 3) and gently lift the seat cushion and fold it back into position making sure the hook (E) slides below the seatback bottom. Press down on the seat cushion to lock into place.

4. Replace headrests.

Figure 3

E

D

9

Folding the third row seat

1. Remove the head restraints.

2. Pull up the strap (A), then fold the seatback forward.

3. To return, pull the strap (B), then raise the seatback until it locks securely into place.

A

B

10

TECHNOLOGY

Keyless Entry System

F.A.S.T.-Key

Multi Information Display Switch

1. LOCK ( ) button

2. UNLOCK ( ) button

3. Power liftgate button

(if equipped)

4. PANIC button

5. Operation indicator light

Normal Key

If the F.A.S.T.-key battery is not operating properly

Insert the F.A.S.T.-key into the key slot in the instrument panel.

Starting the engine and changing the operation mode should be now possible. Remove the F.A.S.T.-key from the key slot after starting the engine or changing the operation mode.

A

While carrying the F.A.S.T.-key, press the driver’s or front passenger’s door lock/unlock switch A .

Each time the multi information display switch is operated, the buzzer sounds and the multi information display changes between information such as warnings, trip odometer, average and momentary fuel consumption, distance range, etc.

Start/Stop Engine Switch (if equipped with F.A.S.T.-key)

While carrying the F.A.S.T.-key within the operating range, the Start/Stop button can be used to start the engine.

• Move the selector lever in “P” position and hold the brake pedal down firmly, push the Start/Stop button.

• To stop the engine, stop the vehicle completely and move the selector lever in “P” then press the Start/Stop button.

* If you have to bring the engine to an emergency stop while driving, press and hold the Start/Stop button for 3 seconds or more, or press it quickly 3 times or more.

• If you press the Start/Stop button without depressing the brake pedal, you can change the operation mode in the order of OFF, ACC, ON, OFF.

• If the engine cannot be started or the operation mode cannot be changed, check the position of the F.A.S.T.-key or the battery performance of the F.A.S.T.-key.

AUDIO SYSTEM

11

USB and iPod Input





D





B

C

A 



To enter frequencies into the memory (AM/FM/SAT)

1. Press A to turn on the audio system.

2. Press B to select the desired band (AM/FM/SAT).

3. Press C to Seek Station

4. Hold down one of the Memory select buttons D (1-6) until it beeps in order to save that station to memory.



Audio Remote

Control Button

SEEK

Change station or track

VOLUME

UP

VOLUME

Down

MODE

Change the audio source

NOTE: Please refer to your Owner’s Manual for more detailed information on how to use your audio system.

1. Park your vehicle in a safe place and turn the ignition switch to

LOCK position.

2. Connect the cable  (cable is not included with the vehicle) to the

USB memory device

3. Open the cover

 or the Dock connector  to the iPod  .

 in the floor console box. Connect the cable  to the USB input terminal  .

4. Turn the ignition switch to the “ACC” position. Turn on the audio system.

5. Press E several times to switch to the USB mode. The input mode changes as follows:

CD  USB  Bluetooth ®

6. Depending on your USB device, it may take longer for playback to start.

7. Once the device is selected, playback starts.

With Display Audio System, follow steps 1 through 4 above

5. Press MENU on the touch screen.

6. Touch USB.

7. Touch <Folder> then select a track and begin playback.

DISPLAY AUDIO SYSTEM (if equipped)

System Settings

System related settings, such as the operation sound and the time, can be made.

1. Press the MENU key. The top menu is displayed.

2. Touch Setting, and then System Setting.

The system setting screen is displayed.

Listening to the Radio

This explains how to listen to AM and FM radio broadcasts. HD Radio TM broadcast or analog broadcast can be received.

1. Press the MENU key. The top menu is displayed.

2. Touch AM or FM. The radio broadcast information screen is displayed.

This is a setting item displayed by touching

Settings name Settings value

Time

Adjustment

Time

Time Setting.

Settings content

Time Display

Settings

Date

Touch the corresponding ▲ or ▼ and change the date and time.

3. Touch TUNE to tune in a station. The station at the selected frequency is played.

This HD Radio receiver enables:

PSD

HD2/HD3

Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.

Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.

Digital Sound Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.

Time

The date and time display format can be set.

12h or 24h display can be set.

DISPLAY AUDIO SYSTEM (continued)

FM Radio Broadcast Information Screen (Display Audio System only)

1)

2)

6)

7)

3)

10)

11),12)

13)

14)

4)

5)

8)

9)

15)

16)

17)

1. Source plate - Displays the name of the currently selected source, preset channel number, reception frequency, and station name.

2. HD Radio TM indicator - Displayed during digital sound output.

3. Preset switch - Allows you to register your favorite broadcast stations.

Touch and hold the switch for the desired preset channel number until you hear the “beep”. This registers the broadcast station currently being received.

**→“Register Your Favorite Broadcast Stations”

4.



- Touching it displays the sub-menu. The Scan, Radio Setting, Sound Control settings can be made.

5. <TUNE> - Used to change the frequency. Touching and holding until you hear the “beep” starts automatic station selection (seek).

**→“Starting the Seek”

6. SSN - Displays the SSN (Short Station Name) that is currently being received. If there is a sub-channel, the received channel number/total number of sub-channels is displayed.

7. PTY - Displays the PTY (Program Type) being received.

8. Info - Switches to information display.

9. Station List - Displays a list of the stations that can be received.

**→“Search for Broadcast Stations from the Station List”

10. FM1, FM2 - Allows you to register your favorite 6 stations for each band.

11. Title - Displays the acquired title name.

12. Radio Text - During analog reception, “Title” changes to “Radio Text”, and the acquired radio text is displayed. The “artist” and “album” are not displayed.

13. Artist - Displays the acquired artist name.

14. Album - Displays the acquired album name.

15. Indicator - LIVE: Live event broadcasts are displayed as they are received.

RBDS: RBDS data is displayed as it is received.

16. Switch page - If the title, artist name, and album title cannot fit in one page, the display can be switched to Page 2 and beyond.

17. Preset - Switches to preset display.

**See Display Audio Owner’s Manual

13

14

BLUETOOTH ® OPERATION WITH DISPLAY AUDIO

Bluetooth ® Controls

For a list of compatible Bluetooth ® devices please go to http://www.mitsubishicars.com/owners

A B C

A

B

C

SPEECH button:

Change to voice recognition

PICK-UP button:

Answer an incoming call

HANG-UP button

End a call or voice recognition

Registering a Bluetooth® Device Using Display Audio

Register a Bluetooth ® device with this product.

1. Press the MENU key. The top menu is displayed.

2. Touch Setting, and then Bluetooth ® Setting.

3. Touch Register Device.

4. Enter the pass key displayed on the screen into the Bluetooth ® device.

Calling by Entering a Telephone Number

1. On the mobile phone screen, enter the telephone number.

2. Touch the “OFF HOOK” key.

“OFF HOOK” key

Making a Call from a Phonebook

1. Display the vehicle phonebook screen or the mobile phonebook screen.

**→ “Display the Phonebook”

2. Select and touch the person to call.

3. Touch the telephone number to call.

4. Touch Yes.

Incoming Calls

The audio guide sounds and the incoming call screen is displayed.

**See Display Audio Owner’s Manual

When the connection is complete, a screen is displayed for selecting the Bluetooth ® device. For details, refer to the user manual for the

Bluetooth ® device.

FAQ’s

Q: Is my phone compatible with the factory Mitsubishi Bluetooth ® Hands Free System?

A: Check the list of compatible phones, www.mitsubishicars.com/owners to see if the phone is Bluetooth ® supported.

Q. Why doesn’t my device (USB, iPhone, Bluetooth ® Audio, etc.) play when connected?

A: You need to press the Mode button to select the appropriate device you want to use.

Q: How do I use Bluetooth ® Audio (if equipped)?

A: Please refer to your Owner’s Manual for instructions.

Q: Why does my Anti-Lock Braking System (ABS) make a noise?

A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front engine compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.

Q: Why does the Audio System take so long to upload my music from my audio music device?

A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depending on the amount of music you have on your device, this may take a few minutes.

Q: What are the different ways of playing music from my portable music player through the stereo system in my vehicle, when equipped with the FUSE Hands-free

Link System™?

A: There are two ways of playing music through your vehicle’s sound system.

• USB port - The FUSE system will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have the

FUSE system find and play the song in your device that you prefer without physically searching your device. This is done via voice commands.

• Bluetooth ® Streaming - Once your device is paired to the FUSE system, you can stream music from your device through the FUSE system to your vehicles sound system. No wires or cords. Your music stops and restarts at the same song when you exit and when you re-enter the vehicle. Voice commands are not available.

Q: Why can’t I control the music track selection via voice commands while Bluetooth ® streaming?

A: The Mitsubishi system uses AVRCP 1.3 (Audio/Video Remote Control Profile) which does support song information (title, artist, track, etc.). However, you must have a device that also supports AVRCP 1.3 to supply that information to the Mitsubishi system.

Q: My Outlander is equipped with “Micron Air Filtration”. Where is the filter located and does it need servicing?

A: The micron air filter is a small filter element which is located in the HVAC box just behind the lower glove box. The filter should be inspected frequently for debris. The filter works well at filtering incoming air however the filter will clog and lead to reduced outlet air volume if not serviced on a regular basis.

15

16

FAQ’s

Q: I am having trouble with my Power Liftgate working properly. Sometimes it works and sometimes it doesn’t. Am I doing something wrong?

A: First check the ACTIVE/OFF button located below the climate control unit and check to see that this button is set to ACTIVE. If so, then you will find that the system needs to have ALL the doors unlocked for the unit to work properly. If only the driver’s door is unlocked, the power liftgate button will not work.

Q: My Outlander has two 12V accessory outlets. What devices can be plugged into these outlets?

A: Both of these outlets are protected with 15 amp fuses. Always check the current draw rating of any device prior to use in the vehicle. If the device is rated above 12 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).

Q: How can I get the MPG stated on the window sticker?

A: Vehicle driving styles will greatly affect MPG. Avoid sudden abrupt starts from a stop and let the vehicle coast to the traffic light. Both of these styles will increase mileage and reduce brake lining wear.

• Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 65 mph.

• Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon.

Proper tire pressure also ensures optimum tire performance (including tire wear.)

Q: How does the Navigation System choose a certain route?

A: The system takes into account traffic conditions, road types, distance and road width to recommend the route.

Q: Why do my Rain Sensing Windshield Wipers operate on their own when it’s not raining?

A: • When the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers.

• The wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor or when the windshield is frosted over.

• To stop the wipers, place the lever in the OFF position.

Q: Why does my check engine light come on after I put gas in my car?

A: There are many reasons why your check engine light may illuminate. Before calling your dealership, make sure the fuel cap is fully engaged and you have heard three clicks when tightening it. After checking and hearing three clicks and the light is still on, contact your dealership.

Q: How do I use the emergency key when the F.A.S.T.-key battery or vehicle battery is run down?

A: If your Outlander is equipped with a One Touch Start button and the door does not open, take the key out from the fob and unlock the door manually. Put the key back into the fob and insert it into the slot provided below the Climate Control Switches. Starting the engine and changing the operation mode should now be possible. Remove the F.A.S.T.-key from the key slot after starting the engine or changing the operation mode.

2015 OUTLANDER www.mitsubishicars.com

ACAD-P08000 (6/14)

Dieline -DO NOT PRINT!

2015 OUTLANDER

Owner’s Handbook