Product Data Sheet

4 Point Relay Card

AX-RL4

The AX-RL4, 4 Point Relay Card, is an optional PBUS

(RS485 network) peripheral module that provides four individually programmable relay outputs from an

Axis AX Series Intelligent Fire Alarm Control Panel. Up to sixteen (16) AX-RL4 cards can be connected to a single Axis AX Series Intelligent Fire Alarm Control Panel providing a maximum of 64 relay outputs. Each output of the AX-RL4 is fully fi eld programmable using the

Advanced powerful ‘DynamiX’ cause and effect rules of its PC-NeT fi eld confi guration program.

The AX-RL4, 4 Point Relay Card, can be installed in two different confi gurations; one AX-RL4 can be mounted within the Axis AX Series Intelligent Fire Alarm Control

Panel enclosure (if mounting location is available) or two (2) AX-RL4 cards can be mounted in a separate enclosure.

Each AX-RL4 card has on-board LEDs for the indication of individual relay activation, PBUS (RS-485 network) communications and microprocessor heartbeat.

Unique Features:

• Field Programmable Relay Card

• 16 Cards per Axis AX Series FACP Peripheral Bus

• Powerful DynamiX Cause & Effect Programming

• 120 VAC @ 5 Amp Rating

Features:

• Dedicated Power Supply Monitoring Input

• 64 Relays per Axis AX Series FACP Peripheral Bus

• Removable Field Wiring Terminal Blocks

Listings and Approvals:

• ETL ANSI/UL 864 Listed: 3118002NYM-001B

• CSFM Approved: 7165-1713:0101

• NYCFD COA #6080

900-014 Rev. 1.2 Page 1 of 2

www.advancedco.com

AX-RL4 (4 Point Relay Card) Wiring AX-RL4 installed in Optional AX-009 Enclosure

USB

RS232 PBUS

B A B A O/C OUT

AUX DC

OUT

0V V + 0V V +

A B

OUT

A

IN

B P S U

FLT

24V 0V

N/C N /O COM N/C N /O COM N/C N /O COM N/C N /O COM

RLY

#1

RLY

#2

RLY

#3

RLY

#4

Ordering Information

AX-RL4 4 Point Relay Card

AXM-009* Optional Listed Enclosure (supports 2 AX-RL4’s)

* For gray enclosure, add the suffi x “G” to the part number.

AX-RL4 Relay Card Specifi cations

Operating Voltage 15-30 VDC (from base card or Listed power supply)

Operating Current

Quiescent

Alarm

Output Ratings

LED Indicators

End-of-Lines

22 mA

100 mA (all 4 relays active)

5A @ 30 VDC/120 VAC

Relay Output Active

PBUS Communications (RX/TX)

Processor Heartbeat

10KΩ - Fault Remote Power Supply

150KΩ - PBUS EOL Built on Board

Environment Indoor, Dry

Operating Temperature 32-120 0 F (0-48 0 C)

Humidity

Weight (AX-RL4)

Optional Enclosure

Dimension

10-95% (non-condensing)

3 oz

8.58” x 11.81” x 1.77”

Advanced Fire Systems Inc

100 South Street, Hopkinton, MA 01748

Tel: (508)

Fax: (508)

Email: [email protected]

Web: www.advancedco.com

As our policy is one of constant product improvement the right is therefore reserved to modify product specifi cations without prior notice.

900-014 Rev. 1.2 Page 2 of 2

www.advancedco.com