INSTEON 75790WH, 75790 wireless IP Camera Owner’s Manual
Hirdetés
Hirdetés
INSTEON® Wireless IP Camera
Owner’s Manual
Model No. 75790WH (White) / 75790 (Black)
Rev. 08.27.12
CONTENTS
INSTEON® Wireless IP Camera
insteon.com 1
INSTEON® Wireless IP Camera
1.0 WELCOME
INSTEON® Wireless IP Camera is a fully-integrated high-resolution digital video camera that’s easy to set up and remotely control. Featuring both wired and wireless network connectivity, two-way audio, pan/tilt functions, night vision and motion sensor, INSTEON Wireless IP Camera is a complete video monitoring solution in a discrete package, making it perfect for home security, business surveillance, baby monitoring, pet watching and much more.
Remotely set up, access, control and manage the camera from anywhere via the embedded web page
(supported by all versions of Internet Explorer, Safari, Firefox and Chrome) or home management software such as HouseLinc. Or, integrate it with the INSTEON SmartLinc Hub (sold separately) to use with the INSTEON iOS/Android smartphone and tablet app.
The camera transmits remote video on any IPV4 network; a high-quality video image can be transmitted at 30 FPS over LAN/WAN with MPEG hardware compression technology.
1.1 Features
• High-speed video processor
• 300 dpi high definition color CMOS sensor
• IR night vision with 26-foot range
• 300
°
pan and 120
°
tilt functions
• Microphone and speaker
• Motion sensor (supported by DDNS and UPnP)
• Email alerts
• Optimized MPEG video compression
• Multi-level user management and password control
• Embedded web server
• WiFi IEEE 802.11b/g/n with WEP/WPA/WPA2 encryption
• Still image snapshots
• HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP supported
1.2 What’s in the Box?
● INSTEON® Wireless IP Camera
● WiFi antenna
● DC power supply
● Quick Start Guides
● Setup CD (includes IP Camera Tool and Owner’s Manual)
● Network cable
● Optional mounting bracket insteon.com 2
1.3 Product views
1.3.1 Front View
INSTEON® Wireless IP Camera
1.3.2 Back View
insteon.com 3
INSTEON® Wireless IP Camera
1.3.3 Bottom View
The reset button is on the bottom of the camera. To reset the camera to factory default settings, make sure that power is supplied to the camera, then press and hold reset button for 15 seconds. After reset, your username and password will return to the factory default administrator username and password.
1.4 Before Camera Use
1.4.1 Software Installation
1) Put the CD in the CD drive of your computer, then open CD
2) Double click IPCamSetup.exe. Follow the onscreen instructions to install camera software.
3) Click Next to complete the software installation insteon.com 4
INSTEON® Wireless IP Camera
Upon installation completion, restart computer. The IP Camera Tool icon will appear on the desktop automatically.
NOTE: If you use Windows 7 and there is no icon on desktop after installation of the IP Camera Tool, check the camera software installation path. For example, if the path reads
C:\Windows\System32\IPCamera.exe, then edit the shortcut to C:\Windows\SysWOW64\IPCamera.exe.
CAUTION: Use only the power adapter attached with the product. Using an unauthorized power adapter may cause damage to your Camera. The IP Camera should be installed indoors only.
1.4.2 Camera Installation
NOTE: The IP Camera should only be installed indoors.
1) Screw in WiFi antenna and adjust it so it points straight up
2) Plug network cable into camera and into your router
3) Plug power adapter into the camera and then into the power outlet.
CAUTION: Make sure to only use the power adapter supplied with the camera. Using a non-approved power adapter may damage the camera.
4) Camera takes approximately 30 seconds to start up. It will display an IP address on IP Camera Tool.
When the camera is powered and the network cable is plugged in correctly, the small green network
LED will turn on and the small yellow LAN port LED will flash. Network light will blink and power light will turn on.
2.0 SOFTWARE OPERATION
2.1 IP Camera Tool
When camera has been installed, open IP Camera Tool program on your computer. It will automatically begin searching for your camera over the LAN. insteon.com 5
INSTEON® Wireless IP Camera
There are three possible scenarios:
1) If no camera is found on the LAN: after about one minute of searching, the field will display “IP
Server not found” and automatically shut down IP Camera Tool program. Check if DHCP is enabled on your router, or disable MAC address filtering if on WiFi. Also, make sure that your firewall (if used) isn’t blocking access to the camera.
2) If cameras are found on the LAN: all of the cameras will be listed and the total number will be displayed in the result field (as shown above).
3) If cameras found on the LAN do not share the same subnet with the computer: a prompt will be displayed. Click right mouse button to choose “Network Configuration.” This will set the IP address of the camera to the same subnet as the LAN. You can also choose “Obtain IP from DHCP server” or “set a static IP for the camera.”
NOTE: If you could not find the camera’s IP on the IP Camera Tool, check that DHCP is enabled on your router, that your MAC address filter is disabled and that a firewall or antivirus software isn’t blocking the camera.
Setup Options
Right-click the IP camera to display six options: Basic Properties, Network Configuration, Upgrade
Firmware, Refresh Camera List, Flush Arp Buffer and About IP Camera Tool:
• Basic Properties: Find device information such as device ID, the system firmware version and web UI version
If there are several cameras on the list, then choose Basic Properties to check the device ID and find that camera’s specific IP address. For example, if device ID is 00606E8C5058, it will have the same MAC address as found on the sticker on the bottom/back of the camera.
Each camera has its own MAC address. Sometimes, if a camera’s IP address is not found on the IP
Camera Tool, the firewall may be blocking it. In that case, you can either add the MAC address to your router and give it a fixed IP, or add the MAC address as a trusted site. There are two MAC addresses: insteon.com 6
one is a wired MAC, and the other is a WiFi MAC.
INSTEON® Wireless IP Camera
• Network Configuration: Configure network parameters
• Obtain IP from DHCP server: If checked, camera will obtain its IP address from your DHCP server
• IP Address: Fill in the assigned IP address. Make sure you are using an address that is on the same subnet as your PC.
• Subnet Mask: Use the subnet mask that matches your LAN insteon.com 7
INSTEON® Wireless IP Camera
• Gateway: This is your internet gateway and usually the address of your router
• DNS Servers: Either use the DNS server address assigned by your ISP or one from a third party like
Google (8.8.8.8) or OpenDNS (x.x.x.x)
• HTTP Port: The default port is 80. You can set another port number, such as port 8005, 85, 8100, etc. for port forwarding.
• User: Default administrator user name is “admin”
• Password: There is no default password
NOTE: If the prompt “Subnet doesn’t match, dbclick to change!” appears, enable DHCP and choose obtain IP from DHCP server, or set camera’s IP address and gateway once again.
• Upgrade Firmware: for latest firmware updates, visit the Wireless IP Camera product page on
INSTEON.com
2.2 Camera Login
Access the camera through the IP Camera Tool, Internet Explorer (IE), Firefox, Chrome, Safari or the
INSTEON iOS/Android smartphone and tablet app (requires SmartLinc Hub, sold separately).
1) Double-click the camera’s IP address. Your default browser will be automatically open and display the camera login page. You can also access the camera by directly by typing in the camera’s IP address:
2) The default user is admin. Leave the password field blank.
3) There are two login modes depending on your browser: ActiveX (IE) and Server Push Mode (Safari,
Firefox, Chrome) insteon.com 8
INSTEON® Wireless IP Camera
Internet Explorer Setup:
Fill in the “admin” user name and click the first login button.
The first time you log into the UI, you will receive an ActiveX prompt (as shown above). Right click on the active prompt and choose Run Add-on. insteon.com 9
INSTEON® Wireless IP Camera
Select Run on the next prompt. You will return to the login screen.
Fill in the “admin” user name and click login again. You will see a live video feed. insteon.com 10
INSTEON® Wireless IP Camera
NOTE: If you cannot view live video after running ActiveX, change the port number to a number other than 80 and try again.
Make sure all firewall or antivirus software on your computer is not set to block your camera. If you are unable to run the ActiveX control, try disabling your firewall or antivirus program.
Safari, Firefox, Chrome and Other Browser Setup:
Fill in the “admin” user name and click the second login button.
You may be asked for your username and password again prior to login. After you enter your user name, you will see the camera’s device status.
Click Live Video to see the camera’s live video feed. insteon.com 11
INSTEON® Wireless IP Camera
2.3 Device Status
Internet Explorer:
If camera is connected properly, device status LED will be green. If LED is yellow, check that ActiveX is enabled, or change the port and try again.
If you want to view the device information, choose For Administrator, then click Device Info. insteon.com 12
INSTEON® Wireless IP Camera
Firefox, Chrome and Safari:
When you login to the UI, you will see Device Status which is the same as Device Info in Internet
Explorer.
2.4 For Visitor
Internet Explorer: insteon.com 13
INSTEON® Wireless IP Camera
Multi-device window: The firmware inside the camera can support a maximum of nine simultaneous cameras. Add cameras in multi-device settings.
OSD: Add a timestamp to the video with five character colors
Add timestamp on record: Add a timestamp to a prerecorded video
Alarm sound off: Mute alarm sound when motion has been detected
Audio buffer: Buffer audio for a set number of seconds
(folder): When you enable motion alarm, the camera will automatically record and store the file to a predefined folder. This icon controls the folder pop-up.
(headphones): Hear the sound captured by the camera’s built-in microphone. You may need to plug in headphones or enable computer speakers to hear the audio.
(microphone): Talk through your computer’s microphone which will transmit your voice to the camera’s speaker. You will be heard through the camera.
Record: Begin recording video. Click again to stop recording and save the .avi file to the folder you previously selected.
Firefox, Chrome and Safari:
You will see the picture above when you log into the camera as a visitor.
2.5 For Operator
Internet Explorer:
Click For Operator. The following screen will appear: insteon.com 14
INSTEON® Wireless IP Camera
If you click here, the camera will horizontally and vertically rotate and then stop at the center
Turn off IR light
Turn on IR light
Pre-determined location
(vertical arrow): Rotate camera up and down. Click to stop.
(horizontal arrow): Rotate camera left and right. Click to stop.
(eye): Turn on IR lights . Click to turn off IR.
Flip and Mirror: Camera will reverse image/video feed.
Mode: Select lighting mode: 50HZ, 60HZ and outdoor (Note: it is not recommended to use this item outdoors.)
Brightness and Contrast: Adjust video quality.
Preset: Create a pre-defined location setting with this control. Once you have edited your settings, click “set.” This location can now be retrieved by selecting the number assigned and clicking “go.”
Firefox, Chrome and Safari:
Click Live Video. The snapshot button is under For Operator. Other functions under Live Video include refresh video, refresh parameters, audio and close audio. insteon.com 15
INSTEON® Wireless IP Camera
Audio: Listen to the IP Camera’s built-in microphone. We recommend connecting headphones or speakers to your computer.
CloseAudio: Turn off camera audio.
NOTE: If you receive a message stating you require a plugin, install VLC Media Player before using this function. Download and install the plug-in from http://www.videolan.org
. insteon.com 16
During installation, select the Mozilla plug-in.
INSTEON® Wireless IP Camera
2.6 For Administrator
Internet Explorer:
Click For Administrator. The Device Status will appear with the device ID, firmware version and other information about the camera. insteon.com 17
Firefox, Chrome and Safari:
Click Device Management to enter the administrator settings page.
INSTEON® Wireless IP Camera
Device Info: This is similar to Device Status which will have the same information as IE.
Multi-Device Settings: Since this function is controlled by ActiveX, it is not available in Firefox or
Chrome.
Back: In Firefox or Chrome browser, you must click Live Video or Device Status to go back.
NOTE: The record and multi-device functions are controlled by ActiveX controller, so Firefox and
Chrome will not allow these functions.
3.0 CONFIGURE ADMINISTRATOR SETTINGS
3.1 Alias Settings
The default alias is anonymous. Set a name for your camera, then click Submit to save your change.
3.2 Date and Time Settings
Choose the time zone for your country. You can choose Sync with NTP Server or Sync with PC Time. If your time zone uses Daylight Saving Time, enable it here. insteon.com 18
INSTEON® Wireless IP Camera
Figure 3.2c
3.3 User Settings
Set permissions for a visitor, operator and administrator, then click Submit. The camera will reboot. insteon.com 19
INSTEON® Wireless IP Camera
Here you can set the record file path and the alarm record file path for the camera. Record Path will store the file of a manual recording. Alarm record path will store the file of the recording when it is activated by motion (you must set motion alarm first).
Click Browse to choose the path. The default path for both is C:\Documents and Settings\All
Users\Documents.
NOTE: If you are using Windows 7 or Vista, you cannot change the record path. Set it following the instructions:
Windows 7 or Vista's security level is higher than Windows XP/2000. For "set record path" function, add the Device IP address to the IE's “Trusted sites”: IEToolsInternet OptionsSecurityTrusted sitesSitesAdd
3.4 Multi-Device Settings
IP Camera Tool can support up to nine cameras simultaneously.
3.4.1 Add Cameras in LAN
In Multi-Device Settings, you can see all of the devices that were found on the LAN. The first device listed is the default. You can add more cameras in the list for monitoring.
To add an additional camera to monitor, click the selected camera in LAN device list; the alias, host, and HTTP port boxes will automatically be filled in. Enter the correct username and password, then click Add. After all cameras have been added, choose Submit.
insteon.com 20
INSTEON® Wireless IP Camera
To test, choose For Visitor and then click the button that corresponds with however many cameras you added. You will see the simultaneous live feeds from all the cameras. insteon.com 21
INSTEON® Wireless IP Camera
3.4.2 Add Cameras in WAN
If you want to view all cameras remotely, you will need to add them to use DDNS domain name. First, make sure all the cameras you added can be accessed over the Internet. (See Set DDNS settings in the
Quick Start Guide.)
Log into the first camera using a DDNS domain name and port. insteon.com 22
INSTEON® Wireless IP Camera
If you have several cameras, you can use the same DDNS domain name; you only need to set a different port number for each camera.
Click Multi-Device Settings. Choose the additional camera and fill in its name, DDNS domain name and port number. Enter user name and password, then choose Add.
NOTE: Fill in the second camera’s DDNS domain name for its host, not its LAN IP.
Add more cameras the same way. Click Submit to save. insteon.com 23
INSTEON® Wireless IP Camera
Go back to video window. You will see all of the cameras accessible through the Internet. When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via the Internet. insteon.com 24
INSTEON® Wireless IP Camera
3.5 Basic Network Settings
Set a static IP for the camera by choosing Basic Network Settings and selecting an address within your
LAN.
Follow the same procedure to access these settings in the IP Camera Tool.
3.6 Wireless LAN Settings
See Set Wireless LAN Settings in Quick Start Guide. insteon.com 25
INSTEON® Wireless IP Camera
3.7 ADSL Settings
When directly connected to the Internet through ADSL, you can enter the ADSL username and password obtained from your ISP.
3.8 UPnP Settings
Check Using UPnP to MAP Port, then click Submit.
The camera’s software will be configured to port forwarding. We recommend you manually configure port forwarding on your router.
3.9 DDNS Service Settings
DDNS allows users with Dynamic IP addresses to remotely access the camera from external connections. See Set DDNS Service Settings in the Quick Start Guide.
3.10 Mail Service Settings
If you want the camera to send email notifications when motion has been detected, configure Mail
Service Settings. insteon.com 26
INSTEON® Wireless IP Camera
Make sure your sender address supports SMTP. Four recipients can be added to receive images. Use the correct SMTP port for your server; some SMTP servers require a specific port such as 587 or 465, so check with your ISP. Transport Layer Security usually is None, but check with your ISP to be sure. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465,
25 or 587. Click Submit.
Click Test to see if SMTP has been successfully configured.
.
If one of the following errors occurs, check the information you entered, then click Test again:
1) Cannot connect to the server
2) Network Error. Please try later.
3) Server Error
4) Incorrect user or password
5) Sender denied by server. This may be because the server needed to authenticate the user, so check it and try again. insteon.com 27
INSTEON® Wireless IP Camera
6) Receiver is denied by server. This may be due to the anti-spam privacy of the server.
7) Message is denied by server. This may be due to the anti-spam privacy of the server.
8) Server does not support the authentication mode used by the device
Report Internet IP by Mail: If selected, you will receive emails which contain internet IP information, such as when the camera is powered or the Internet IP has changed. Make sure the port is mapped to the router correctly.
Example of a Gmail Setup
3.12 FTP Service Settings
If you want to upload images to your FTP server, you can set FTP Service Settings. insteon.com 28
INSTEON® Wireless IP Camera
FTP server: Set up FTP Server to work with your camera (see topmost image). If you have a FTP server that can be accessed on the internet (see above image).
FTP Port: Usually port 21
FTP Upload Folder: Make sure the folder in which you plan to store images exists and is erasable. The camera will not automatically create a folder.
FTP Mode: Supports standard (POST) mode and passive (PASV) mode
Upload Image Now: Uploads images when you enable the checkbox
Upload Interval: Refers to the time between the current image and the next image
Enable Set Filename: Set a name for the uploaded image when you enable the checkbox. If you select it, the uploaded image will be named after the filename you set. The next image will cover the last image and the FTP upload folder will only have one uploaded image named after the filename you set. insteon.com 29
INSTEON® Wireless IP Camera
Filename: Fill in a name for the uploaded image file. This name is different from the alarm image. You cannot change the name of the alarm image.
Click Submit, then click Test. The following screen will appear if successful:
The following errors may occur:
1) Cannot connect to the server. Check that the FTP server is correct.
2) Network error; try later.
3) Server error
4) Incorrect username or password. Check username and password.
5) Cannot access the folder. Verify the folder exists and your account is authorized.
6) Error in PASV mode. Verify the server supports PASV mode.
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT.
8) Cannot upload file. Verify your account. Check parameters. The saved image name will be similar to
00606E8C1930(sarah)_0_20100728114350_25.jpg; check that your FTP server supports this file name format.
3.13 Alarm Service Settings
If you enable Motion Detect Armed, you will receive email alerts and still images when motion is detected. insteon.com 30
INSTEON® Wireless IP Camera
Select it
If the number is bigger and the sensibility is higher
This will reduce false alarms such as light changes.
If motion is detected after you enable Motion Detect Armed, the Alarm Status will update to Motion
Detect Alarm.
There are five alarm indicators:
1) Button turns red when motion is detected:
2) A beep will sound
3) The camera will automatically record for one minute after motion is detected and save the recording to your preset folder
4) The camera will send an email when motion is activated. If you want to receive images when motion is detected, set Mail Service Settings first. Then set motion alarm: insteon.com 31
INSTEON® Wireless IP Camera
Select this option
If you want the camera to send a motion detection email only during a specific time frame, use
Scheduler to set the time range for motion alarm.
5) Upload images via FTP server when motion is detected. Set FTP Service Settings first and then set motion alarm:
Select this option
You can set an interval for uploading images
There are two alarm options:
1) Alarm will activate any time motion is detected. If you wish to set this option, leave Scheduler unchecked. All time boxes will turn blue. Click Submit. insteon.com 32
INSTEON® Wireless IP Camera
2) Set a daily alarm schedule. Activate the camera alarm by selecting the time range in Scheduler.
Click any hour between 00 and 23 in the Set row to highlight the row and activate a daily motion-detect alarm for that hour. In the example below, the camera will sound an alarm if motion is detected between 6 a.m. and 7 a.m. every day.
Deselect a highlighted hour by clicking the corresponding number in the Clear row.
If you want to set a motion-detect alarm for a specific day and time, click the box of the specified time/day. Click the box again to deselect. insteon.com 33
INSTEON® Wireless IP Camera
If you want the camera alarm activated most of the time, click Set All to highlight all boxes, then click the times you want the alarm deactivated. Click Submit.
3.14 Pan/Tilt Settings
The standard pan/tilt (PT) speed is 3, but is easily adjusted from 1 to 10 (the higher the number, the slower the PT speed).
You can also set your camera’s patrol speeds, or the speed at which it pans horizontally/vertically.
Patrol rounds horizontal: Set speed between 1 and 10 and click Submit, then go back to For
Operator. Click the Horizon patrol button; the camera will horizontally pan the set number of times, then stop automatically. In the example above, the camera will horizontally pan for 5 rounds and then stop automatically. Select Stop horizontal patrol to deactivate this setting. insteon.com 34
INSTEON® Wireless IP Camera
Patrol rounds vertical: Set speed between 1 and 10 and click Submit, then go back to For Operator.
Click the Vertical patrol button; the camera will vertically pan the set number of times, then stop automatically. In the example above, the camera will vertically pan for 4 rounds. Select Stop vertical patrol to deactivate this setting.
Note: Patrol rounds horizontal/vertical has no relation to the rotation rounds when the camera reboots.
3.15 Upgrade Device Firmware
For latest firmware updates, visit INSTEON.com.
3.16 Backup and Restore Settings
Click Submit to save all the parameters you have set. These parameters will be stored in a .bin that can be restored to load the previously set parameters.
3.17 Restore Factory Settings
All parameters will return to factory default settings. insteon.com 35
INSTEON® Wireless IP Camera
3.18 Reboot Device
Click Reboot Device to power cycle the camera. To manually reboot, unplug the camera and plug it back in.
3.19 Log
The log displays the users who have accessed the camera.
3.20 Back
This will take you back to the video window. insteon.com 36
INSTEON® Wireless IP Camera
4.0 APPENDIX
4.1 Frequently Asked Questions
Always confirm connectivity with your LAN and the internet prior to testing your camera.
4.1.1 I forgot my username and/or password.
Reset the administrator username and password by making sure the camera is powered on, then pressing and holding the camera reset button for 15 seconds. This will factory restore the username and password to “admin” with no password.
4.1.2 Why do I keep seeing “Subnet doesn’t match, dbclick to change”?
If IP Camera Tool shows this error, select Obtain IP from DHCP server. If this error still exists afterward, check your LAN connection and verify that the camera subnet and gateway are the same as your computer.
4.1.3 Why isn’t my video streaming or showing images?
The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you will not see the video image. There are two ways to resolve this problem:
1) Reinstall IP Camera Tool and ActiveX control
2) Download ActiveX controller and set IE’s security setting of IE: IEToolInternet
ProperSecurityCustom LevelActiveX control and Plug-ins. Enable the following:
• Download unsigned ActiveX controls
• Initialize and script ActiveX controls not marked as safe
• Run ActiveX controls and plug-ins insteon.com 37
INSTEON® Wireless IP Camera
If ActiveX is running but you still cannot see live video, a red cross is displayed in the center of the video and a yellow light appears in the device status, change the port number (do not use port number 80).
Note: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you still cannot see live video, try shutting down the firewall or anti-virus software and try again.
4.1.4 Why isn’t my camera accessible via the Internet?
1. ActiveX controller is not installed correctly
2. The port that the camera is using is blocked by a firewall or anti-virus software. Try changing the port number. insteon.com 38
INSTEON® Wireless IP Camera
3. Port forwarding is not successful (see How to Set DDN Service Settings in the Quick Start Guide).
4.1.5 IP Camera Tool can’t find my camera’s IP.
1. Verify that the network cable is securely fastened to the camera
2. Make sure DHCP is enabled and MAC address filter is disabled on your router
3, Make sure that a firewall or anti-virus software does not block the camera. You can add the camera as a trusted site through your firewall or anti-virus software.
4.1.6 Why has the UPnP failed?
The UPnP only contains port forwarding. Sometimes, port forwarding may fail automatically because of a firewall or anti-virus software. It may also be due to the router’s security settings. Manually configure port forwarding so the camera can be viewed on the internet.
4.1.7 Why can’t I find a desktop shortcut to IP Camera Tool?
If you use Windows 7 or Vista and the shortcut is missing after installing IP Camera Tool, check the program path. For example, if the path reads: C:\Windows\System32\IPCamera.exe, then change it to
C:\Windows\SysWOW64\IPCamera.exe. After this you should be able to use the shortcut without any problems.
4.1.8 Why can’t I change the record path?
If you use Windows 7 or Vista, you may be not able to change the record path due to your computer’s security settings. Instead, add the camera as a trusted IE site.
4.1.9 Why can’t I find the multi-device settings and record icons?
Record and multi-device functions are controlled by ActiveX. These functions are not available in
Firefox, Chrome and Safari. insteon.com 39
INSTEON® Wireless IP Camera
4.1.10 Why won’t my camera connect wirelessly?
If your camera cannot connect wirelessly after you enable the wireless settings, power cycle the camera by unplugging the power cable and plugging it back in. Make sure your wireless settings are correct and match your wireless router or access point.
4.1.11 Why can’t I see my other cameras in multi-device WAN?
If you want to view all the cameras on WAN, verify that each camera you added in the multi-device settings can be accessed using the DDNS name and port number. Make sure you use the DDNS domain name, not the camera’s LAN IP. See How to Add Cameras in WAN.
4.1.12 I only see a black screen or undefined characters when using remote login.
If you can remotely access the login page, this indicates that your DDNS settings are correct. If you are unable to see live video and/or undefined characters, this may be due to Internet speed issues or the camera using WiFi.
4.2 Default Parameters
Default network Parameters
IP address: DHCP
Subnet mask: 255.255.255.0
Gateway: DHCP
DDNS: Disabled
Default administrator username: admin
Default administrator password: no password
4.3 Port Forwarding Basics
A software port is a numbered connection that your network uses to provide or deny access to your home LAN (local area network) from a remote location. Port forwarding allows you to access your home LAN from any Internet connection.
IMPORTANT! Port forwarding setup varies based on the make and model of your router. These examples are provided to help you understand the port forwarding process , but see your router’s manual for device-specific port forwarding instructions. insteon.com 40
INSTEON® Wireless IP Camera
Netgear
1. Type your router’s address into an Internet browser. By default, this should be 192.168.0.1; the information should be provided in your router’s instructions or on the router itself.
2. You will be prompted to enter a username and a password. For Netgear devices, the default username is "admin" and the password is either "password" or "1234" (unless you have already changed them).
3. Open "Advanced" and click "Port Forwarding." The Ports window will open with information on existing HTTP and FTP ports (these are used to connect your router to the Internet).
4. Click the "Add Custom Service" button and enter a new service name, such as
INSTEONIPCamera1).
5. Enter the camera’s IP address (found in the IP Camera Tool device list) into the Server IP Address field.
6. You will need to specify a port range to have open for your camera. 8000-8999 is a good range to work with, but make sure the port you open does not conflict with any ports you may already have open (from your list of Services on the "Port Forwarding" page). To enter a single port (ex. port 8030), use the same port for the "Start Port" and "End Port."
7. Click "Apply" and logout from the router settings page.
8. After making sure you are not connected to your local wireless connection, open your smartphone’s Internet browser and enter your camera IP address followed immediately by a colon and the port you have opened (for example http://192.168.1.4:8030). You should see the camera login screen.
Linksys
1. Type your router’s address into an Internet browser address bar. By default this should be
192.168.1.1; the information should be provided in your router’s instructions or on the router itself.
2. You will be prompted to enter a username and a password. For Linksys devices, the default username is "admin" and the password is left blank unless you have changed them previously.
3. Once logged in, open "Applications and Gaming" on the left navigation and click on "Port
Range Forwarding". The Ports window will open with information on existing HTTP and FTP ports (these are used to connect your router to the Internet).
4. In the "Application" field enter a new Service Name, such as INSTEONIPCamera1. insteon.com 41
INSTEON® Wireless IP Camera
5. Enter the camera’s IP address (found in the IP Camera Tool device list) into the Server IP Address field.
6. In the "UPD/TCP" field select "Both."
9. You will need to specify a port range to have open for your camera. 8000-8999 is a good range to work with, but make sure the port you open does not conflict with any ports you may already have open (from your list of Services on the "Port Forwarding" page). To enter a single port (ex. port 8030), use the same port for "Start" and "End."
7. Click "Save Settings" and logout from the router settings page.
8. After making sure you are not connected to your local wireless connection, open your smartphone’s Internet browser and enter your camera IP address followed immediately by a colon and the port you have opened (for example http://192.168.1.4:8030). You should see the
D-Link camera login screen.
1. Type your router’s address into an Internet browser. By default, this should be 192.168.0.1; the information should be provided in your router’s instructions or on the router itself.
2. You will be prompted to enter a username and a password. For D-Link devices the default username is "admin" and the password is left blank unless you have changed them previously.
3. Once logged in, open "Advanced" and click on "Port Forwarding" in the left navigation. The
Ports window will open with information on existing HTTP and FTP ports (these are used to connect your router to the Internet).
4. In the "Name" field enter a new Name, such as INSTEONIPCamera1.
5. Enter the camera’s IP address (found in the IP Camera Tool device list) into the Server IP Address field.
6. In the "Traffic Type" drop-down menu select "Any."
7. You will need to specify a port range to have open for your camera. 8000-8999 is a good range to work with, but make sure the port you open does not conflict with any ports you may already have open (from your list of Services on the "Port Forwarding" page). To enter a single port (ex. port 8030), use the same port for "Start" and "End."
8. In the "Schedule" drop-down menu, select "Always."
9. Click "Save Settings" and logout from the router settings page. insteon.com 42
INSTEON® Wireless IP Camera
10. After making sure you are not connected to your local wireless connection, open your smartphone’s Internet browser and enter your camera IP address followed immediately by a colon and the port you have opened (for example http://192.168.1.4:8030). You should see the camera login screen.
4.4 Specifications
Image Sensor
Description
Image Sensor
INSTEON® Wireless IP Camera
High Definition Color CMOS Sensor
Display Resolution 640 x 480 Pixels(300k Pixels)
Lens f: 3.6 mm
Lens
Video
Mini. Illumination
Lens Type
0.5 Lux
Glass Lens
Image Compression MJPEG
Image Frame Rate 15fps(VGA),30fps(QVGA)
Resolution
Flip Mirror Images
640 x 480(VGA), 320 x 240(QVGA)
Vertical / Horizontal
Light Frequency
Video Parameters
50Hz, 60Hz or Outdoor
Brightness, Contrast
Communication Ethernet One 10/100Mbps RJ-45
Supported Protocol HTTP,FTP,TCP/IP,UDP,SMTP,DHCP,PPPoE,DDNS,UPnP,GPRS
Wireless Standard
Data Rate
IEEE 802.11b/g/n (n available on late 2012 models)
802.11b: 11Mbps(Max) 802.11g: 54Mbps(Max) 802.11n: 108Mbps(Max)
Wireless Security
Infrared Light
Dimension
WEP and WPA and WPA2 Encryption
11 IR LEDs, Night visibility up to 26 feet (8 meters)
110(L) x100(W) x108mm(H)
Power
Environment
Gross Weight
Net Weight
768g (Color Box Size:200X124X189mm)
418g (accessories included)
Power Supply DC 5V/2.0A (EU,US,AU adapter or other types optional)
Power Consumption 5.5 Watts (Max.)
Operate
Temperature
0° ~ 55°C (32°F ~ 131°F)
Operating Humidity 20% ~ 85% non-condensing
Storage Temper. -10°C ~ 60° (14°F ~ 140°F)
Storage Humidity
PC Requirements CPU
Memory Size
Display Card
0% ~ 90% non-condensing
2.0GHZ or above
256MB or above
64M or above
Supported OS
Browser
Microsoft Windows 2000/XP/Vista/Windows7-32bit/ Windows7 -64 bit
IE 6.0, IE7.0, IE8.0 Firefox2.0,Firefox3.0, Chrome, Safari or other standard browsers
Certification CE, FCC insteon.com 43
INSTEON® Wireless IP Camera
5.0 OBTAINING TECHNICAL SUPPORT
If you have tried these suggested solutions, reviewed this Owner’s Manual and still cannot resolve an issue you are having with INSTEON Wireless IP Camera, please call the INSTEON Support Line at
800-762-7845 or visit www.insteon.com/support. insteon.com 44
Letöltés
Hirdetés