- No category
advertisement
Variable Speeds
V4000/ 2001
Quality Certificates
TABLE OF CONTENTS
Titan Beltbox Features
General Information
Construction Views
Pulleys
AGMA Service Factors
V Belt Dimensions
Options
Titan with In-Line Reducer
Nomenclature
Mounting Positions
Selections
Dimensions U - Flow
Dimensions Z - Flow
Titan with Shaft Mount Reducer
Nomenclature
Mounting Positions
Selections
Dimensions U - Flow
Dimensions Z - Flow
Titan with Bevel Reducer
Nomenclature
Mounting Positions
Selections
Dimensions U - Flow
Dimensions Z - Flow
B 1
B 2
B 4
B 6
B 32
B 38
C 1
C 1
C 1
C 1
C 1
C 1
D 1
D 2
D 4
D 6
D24
D32
A 2
A 3
A 4
A 7
A 8
A 12
A 12
I
TABLE OF CONTENTS
Titan with Worm Reducer
Nomenclature
Mounting Positions
Selections
Dimensions U - Flow
Dimensions Z - Flow
Nordisc Friction Drive Features
General Information
Construction Views
C- face Input
Nordisc with In - Line Reducer
Nomenclature
Mounting Positions
Selections
Dimensions
Nordisc with Shaft Mount Reducer
Nomenclature
Mounting Positions
Selections
Dimensions
F 2
F 3
F 5
F 6
G 1
G 2
G 4
G 6
G 25
H 1
H 2
H 4
H 6
H 21
E 1
E 2
E 4
E 6
E 16
E 22
II
TABLE OF CONTENTS
Nordisc with Bevel Reducer
Nomenclature
Mounting Positions
Selections
Dimensions
Nordisc with Worm Reducer
Nomenclature
Mounting Positions
Selections
Dimensions
Titan Parts List
Nordisc Parts List
Terms and Conditions of Sale
K 2
K 4
K 6
J 1
J 2
J 4
J 6
J 19
I 1
I 2
I 4
I 6
I 17
III
EXPLANATORY NOTES
TITAN TM ADJUSTABLE-SPEED DRIVES
• 275 % MOMENTARY OVERLOADCAPACITY
• WIDE SELECTION OF SPEED REDUCERS AND
MOUNTING CONFIGURATIONS
Bolt-on motor construction
Wide selection of motor types, enclosures and brakemotors
Corrosion resistant aluminium alloy construction
Convenient handwheel speed adjustments. Electric remote speed controls and indicators available.
Robust cast iron housing
Bolt up to NORDIndustrial
Tough Speed Reducers for durable performance
• In-Line
• Shaft Mounted
• Helical-Bevel
• Helical-Worm
Stainless Paint - USDA / FDA Accepted
Static conducting belt for hazardous duty applications.
Pulley made from high strength, light weight alloy „dufondal“.
Dufondal is extremely durable and resistant to „grooving“.
Belt case can be disassembled in just minutes without removing bearings or needing special tools.
PERFORMANCE SPECIFICATIONS
• 1/4 to 150 HP
• up to 8:1 adjustable speed range
• Output torques to 177.000 lb-in
• U-flow or Z-flow configurations
BUILT TO LAST
Titan adjustable speed drives are designed to provide long, trouble-free performance in the most demanding adjustable-speed applications.
ASSURED SPEED ADJUSTMENTS
Pulley discs are machined from the light weight alloy, „dufondal“, to resist „grooving“ by the belt during extended constant speed operation. Sliding pulley discs ride on a specially formulated bushing system to keep speed adjustments smooth.
UNICASE
TM
SPEED REDUCER
CONSTRUCTION EXTENDS SERVIC LIFE
Gearcases are SAE 30 grey cast iron with internal reinforcements for strength and rigidity. This unique design eliminates the oil leakage, oil contamination and gear set misalignment problems common to drives with bolt-on output covers or flanges.
LONG BEARING LIFE
Pulley assemblies are dynamically balanced to prevent excessive vIbration to extend bearing and key life. Speed reducer bearings are rated for a minimum 5.000 hour B-10 life per AGMA
Standard 2001.
FAST AND EASY TO MAINTAIN
Nord engineers have designed Titan drives to be maintenance friendly. The split belt case can be disassembled in just minutes for fast belt, pulley and bearing inspection. Plus, the Titan’s C-Face motor can be quickliy replaced by simply removing four bolts ... not by time-consuming disassembly of the entire motor.
APPLICATION MATCHED
Titan adjustable speed drives are available with a wide variety of options including: severe duty protection for wash down or outdoor duty, electric remote speed controls and indicators, a wide selection of motors, speed reducer and more.
A2 www.nord.com
EXPLANATORY NOTES
General
•
•
•
•
•
•
•
•
•
When operating conditions dictate variable output speeds, the NORDTitan Beltbox will supply infinite speed variations over a fixed speed range. Sizes up to 150
Hp are available with any NORDheavy duty Industrial Tough gearbox. Gearboxes with In-Line, Shaft Mount, Bevel and Worm construction are available with any of our easily customized options to solve your application problems. For customized Gearbox options consult our Master Catalog.
NORD’s Adjustable Speed Drive includes motor, beltbox and gearbox packaged in a compact arrangement completely assembled and ready to go from the factory. We offer 11 beltbox case sizes with matching motor and gearbox capability. The advantages of Titan Drives include
Easy to install
Output torque multiplication
Speed reduction from motor rpm
Infinitely adjustable speed range
Adaptable to many environmental conditions
Durable wear resistant pulleys
Easy belt replacement
Handles shock loads
Affordable cost
How does it work?
The motor runs at constant speed (nameplate rpm). Attached to the motor output shaft is an adjusting pulley. When the handwheel is rotated, this pulley changes the belt operating pitch diameter. In turn the driven pulley adjusts it’s operating pitch diameter always keeping the belt center distance fixed. Then power progresses through the gearbox for added speed reduction and torque multiplication. At maximum beltbox output rpm a speed increasing-torque decreasing pulley adjustment is delivered. When minimum beltbox output rpm is set by the handwheel, a speed reduction pulley combination increases the output torque.
Net result is typically a 5:1 speed turndown range and a 5:1 torque increase. Drives can be configured to either a U-flow (standard) or Z-flow arrangement depending upon application needs.
Beltbox Ratings
Size
R 100
TEFC version max. motor HP
2
R 150
R 196
R 210
R 250
R 280
R 300
R 350
R 375
R 400
R 500
15
20
30
40
3
5
10
60
75
150
TENV version max. motor HP
1.5
2
3
7.5
10
15
20
30
40
50
100 max. adjustment ratio
5.0
6.5
8.0
7.5
7.5
8.5
7.2
7.4
5.3
5.0
4.0
max. TORQUE @ min. RPM
(lb-in)
164 / 766
369 / 684
506 / 622
965 / 653
1448 / 653
2046 / 616
2816 / 672
3789 / 665
5902 / 641
7449 / 635
15047 / 614 min. TORQUE @ max. RPM
(lb-in)
33 / 3830
58 / 4385
63 / 4978
129 / 4892
193 / 4892
241 / 5224
392 / 4830
512 / 4929
1112 / 3401
1490 / 3173
3852 / 2454
Speed Adjustment
The speed is adjusted by loosening the lock nut handle and rotating the handwheel.
This adjustment should only be performed when the motor is rotating or damage to the belt and attached equipment may occur.
Speed range is preset by the factory and any speed adjustment within the range is acceptable. Further adjustment of the speed stops may cause damage.
Motor current draw
Selection pages show 460 Volt values. For 230 Volt motors multiply by 2. For 575 Volt multiply by 0.8.
Note that these are approximate current draw values.
For exact information, see motor nameplate.
www.nord.com
A3
EXPLANATORY NOTES
Standard NEMA
C - Face motors
Or
IEC metric
*
Simple Belt Exchange
*
Easy To Inspect
*
Little Maintenance
Static Conducting V - Belts
For Explosion Proof
Environments
U - FLOW
Pulley Material: High Wear
Resistant Alloy: ”Durfondal“
Easy Removal
Of Pulleys
Easy Removal
Of Beltcase Cover
Simple Removal
Of Belt / Pulleys
Very Low Inertia Pulleys,
Dynamically Balanced
Pulleys - Beltcase
Suitable For Washdown
Outdoor Duty
Accurate Cut Belts - Pressure Molded Cogs With High
Efficiency For Low & High Speed Setting, Operating At
Small Diameters With Minimum Noise Levels
Pulleys Mounted On Motor Shaft And Cast Iron
Input Housing Secured By Washer And Bolt
Handwheel
Locking
Mechanism bearing
Titan Has (2) Speed Stops
Preset By The Factory
A4
Gear Reducer Can Be:
*
Unicase - Inline Helical
*
Unicase - Clincher Helical
*
Unicase - Helical Worm
*
Unicase - Helical - Bevel spring
*
No Bearings Mounted
In Housing
*
Corroduty Alloy www.nord.com
EXPLANATORY NOTES
Z - FLOW
Pulley Material: High Wear
Resistant Alloy: “Durfondal“
Easy Removal
Of Pulleys
Gear Reducer Can Be:
*
Unicase - Inline Helical
*
Unicase - Clincher Helical
*
Unicase - Helical Worm
*
Unicase - Helical - Bevel www.nord.com
*
Simple Belt Exchange
*
Easy To Inspect
*
Little Maintenance
Static Conducting V - Belts
For Explosion Proof
Environments
Non-Ventilated Units Can Be Supplied,
Consult Factory
Very Low Inertia Pulleys,
Dynamically Balanced
Pulleys - Beltcase
Suitable For Washdown
Outdoor Duty
Accurate Cut Belts - Pressure Molded Cogs With High
Efficiency For Low & High Speed Setting, Operating At
Small Diameters With Minimum Noise Levels bearing
Pulleys Mounted On Motor Shaft And Cast Iron
Input Housing Secured By Washer And Bolt
Standard NEMA
C - Face motors
Or
IEC metric spring
*
No Bearings Mounted
In Housing
*
Corroduty Alloy
A5
EXPLANATORY NOTES
Motor HP is reduced
Constant HP range
HP
MIN SPEED
Horsepower performance as seen on the driven
Pulley shaft
1750 RPM MAX SPEED
T a2
1
TORQUE
2
T a1
3
4
5
Torque performance as seen on the driven
Pulley shaft
MIN SPEED n
22
1750 RPM MAX SPEED n
21
MIN WRAP
MAX WRAP
MIN SPEEDn 22
MAX WRAP
POS 1
POS 2
1750 RPM
1:1
POS 3 POS 4
MAX SPEEDn 21
MIN WRAP
POS 5
A belt drive is an excellent mechanical adjustable speed device for a variety of tough applications.
However it must be properly applied. A belt drive is not a constant torque or a constant horsepower device. It is a combination of both. Altough a belt drive is a torque multiplier, there are limitations on the amount of torque it can transfer from the driving pulley to the driven pulley. The torque development is limited by the amount of belt wrap around the pulley surfaces.
Belt wrap on pulleys
In the five positions illustrated above, the belt wrap on each pulley varies from minimum to maximum. The torque between a set of pulleys is multiplied by reducing the wrap diameter on the driving pulley and increasing it on the driven pulley. There is, however, a limitation on the maximum torque a set of pulleys can transfer, determind by the amount of wrap around the pulley surfaces. Demand for torque above the mximum torque rating at a given speed setting will result in belt and possibly pulley wear. This wear and tear on the pulleys and belt is caused by excessive belt slippage. It is therefore important to keep the belt wrap as large as possible by operating close to 1:1 pulley setting and keeping the speed range adjustment to a minimum. As long as the load torque is within the rating of the belt and pulley, the durability of the belt will be acceptable. It is also advantageous to use a gear reducer in front of a drive belt. The gear reducer acts as a torque multiplier and unloads the pulley / belt system, allowing the gear reducer to do the work.
Torque at the gearbox output shaft
Torque from the motor is multiplied by the pulley / belt system. The torque-speed curve shows the typical change in torque a belt drive can develop at various speed settings. This torque is multiplied by the gearbox ratio and is the torque available to perform the task required of the application.
Constant torque applications
Many applications such as conveyor, positive displacement pumps and lifts have load torque that does not change over the adjusted speed range. The load torque is constant despite the speed changes. In these applications sizing of the belt drive is usually performed by matching the load torque to the maximum speed n
21 and torque capability T a1
.
Variable torque applications
Some applications such as fans, centrifugal pumps and variable density mixers have increasing torque loads with corresponding increases in speed and result in increasing load horsepower. These drives should be selected based on the maximum speed n
21 and it’s corresponding torque capability T a1
.
Constant horsepower applications
When the torque load varies inversely with the speed in web tensioning, metal rolling, machine tools or similar applications the load horsepower is constant.
These are sized to match the low speed load torque and the high speed load torque with T gearbox service factor is maintained throughout the speed range.
a1 and T a2 respectively. Care must be taken to ensure the proper
A6 www.nord.com
EXPLANATORY NOTES
Snap Ring
Spring:
Do not remove without proper fixture / tools
U - FLOW
TM
TITAN PULLEYS
Bearing
Bearing
Key
Key
Adjusting Pulley (Driver)
Bearing is always mounted next to adjuster.
The pulleys are made of a very durable alloy -
„Durfondal“, a corroduty type of material. This pulley material has a high wear resistant properties, which reduces grooving to a minimum under rated conditions. These pulleys are suitable for washdown and outdoor operation.
The pulleys are virtually maintenance free. They require no disassembly for periodic lubrication. All sliding components are coated against fretting and corrosion, eliminating the nuisance of seizing up.
The key and keyways are maintenance free. The key, which is often subject to notching, is made of a very tough polymer. The generous long key with its long bearing surfaces stands up extremely well against notching action from shock loads or frequent starts / stops.
All these excellent features guarantee a maintenance
free operation.
Combine this with a high strength, high efficiency belt and the Titan
TM will be suitable for most applications.
Key
Key
Spring Pulley (Driven)
Spring is always mounted on the side opposite to the adjusting handwheel.
Z - FLOW
Snap Ring
Spring:
Do not remove without proper fixture / tools www.nord.com
A7
EXPLANATORY NOTES
AGMA GEARMOTOR LOAD CLASSIFICATIONS
The AGMA rated parallel (helical) gearmotors in the catalog are grouped by Service Classes I, II or III.
Class I : (Minimum 0.8 Service Factor)
A gearmotor can operate with steady loads not exceeding the normal rating and 8 - 10 hours of running time per day.
Class II : (Minimum 1.4 Service Factor) a) A gearmotor can operate with steady loads not exceeding the normal rating and 24 hours of running time per day.
or b) A gearmotor can operate with moderate shock loads not exceeding 1.25 x rated load torque and 8 - 10 hours of running time per day.
Class III : (Minimum 2.0 Service Factor) a) A gearmotor can operate with moderate shock loads which are a maximum 1.25 x rated load torque and 24 hours of running time per day.
b) A gearmotor can operate with heavy shock loads in excess 1.25 x rated load torque and 8 - 10 hours of running time per day.
The Nord Gear units in the catalog grouped by AGMA service classes are applied per AGMA service factor listings as shown by 6010 - E88 and 6034 - A87.
The high-speed gearing is finish ground to reduce noise levels to a minimum. The low-speed gears are skived per the latest finishing technology. In many cases the quality levels of the gearing exceeds AGMA quality levels 11-13.
AGMA GEAR REDUCER LOAD CLASSIFICATIONS
This chart is a guideline for the types of loads applied to the following:
Parallel (helical) reducers
Helical-Worm gearmotors and reducers
Helical-Bevel gearmotors and reducers
SERVICE IN HOURS
/ DAY
1/2 hours or less
2 hours intermittently
10 hours
24 hours
LOAD CLASSIFICATION OF THE MACHINERY DESIGN
UNIFORM
0.8
1.0
1.0
1.25
MODERATE SHOCK
0.8
1.0
1.25
1.5
HEAVY SHOCK
1.0
1.25
1.5
1.75
WHEN FREQUENT STOPS / STARTS ARE APPLIED
IN EXCESS OF 10 / HOUR
UNIFORM MODERATE SHOCK HEAVY SHOCK
0.8
1.0
1.25
1.5
1.0
1.25
1.5
1.75
1.25
1.5
1.75
2.0
A8 www.nord.com
AGMA GEAR MOTOR LOAD CLASSIFICATION
APPLICATION
AGITATORS
Pure Liquids
Liquids & Solids
Liquids —
Variable Density
Semi-Liquids —
Variable Density
BLOWERS
Centrifugal
Lobe
Vane
BREWING & DISTILLING
Bottling Machinery
Brew Kettles —
Continuous Duty
Cookers —
Continuous Duty
Mash Tubs
Continuous Duty
Scale Hopper
Frequent starts
CAN FILLING MACHINES
CANE KNIVES
CAR DUMPERS
CAR PULLERS —
Intermittent duty
CLARIFIERS
CLASSIFIERS
CLAY WORKING
MACHINERY
Brick Press
Briquette Machine
Clay working machinery
Pug Mill
COMPRESSORS
Centrifugal
Lobe
Reciprocating
Multi-cylinder
Single Cylinder
CONVEYORS—
UNIFORMLY LOADED
OR FED
Apron
Assembly
Belt
Bucket
Chain
Flight
Oven
Screw
CONVEYORS—
HEAVY DUTY NOT
UNIFORMLY FED
Apron
Assembly
Belt
CLASS OF SERVICE
3-10
HRS/DAY
I
II
II
II
I
II
I
I
—
—
—
II
I
II
III
I
I
II
III
III
II
II
I
II
II
III
I
I
I
I
I
I
I
I
II
II
II
10-24
HRS/DAY
II
II
II
II*
II
II
II
II
II
II
II
II
II
II
—
—
II
II
III*
III*
II
II
II
II
II*
III*
II
II
II
II
II
II
II
II
II
II
II
APPLICATION
Bucket
Chain
Flight
Live Roll (package)
Oven
Reciprocating
Screw
Shaker
CRANES & HOISTS
Main Hoists
Heavy Duty
Medium Duty
Reversing
Skip Hoists
Trolley Drive
Bridge Drive
CRUSHERS
Ore
Stone
DREDGES
Cable Reels
Conveyors
Cutter Head Drives
Jig Drives
Maneuvering Winches
Pumps
Screen Drive
Stackers
Utility Winches
ELEVATORS
Bucket-Uniform Load
Bucket-Heavy Load
Bucket-Continuous
Centrifugal Discharge
Escalators
Freight
Gravity Discharge
Man Lifts
Passengers
Service-Hand Lift
FANS
Centrifugal
Cooling Towers
Induced Draft
Forced Draft
Induced Draft
Large (Mine, etc.)
Large Industrial
Light (Small Diameter)
FEEDERS
Apron
Belt
Disc
Reciprocating
Screw
FOODINDUSTRY
Beet Slicer
CLASS OF SERVICE
3-10
HRS/DAY
II
I
II
II
II
III
II
III
III
II
II
II
II
II
III
III
II
II
III
III
II
II
III
II
II
I
II
I
I
I
II
I
III
II
II
II
II
*
II
I
II
II
I
*
*
III
II
II
10-24
HRS/DAY
III*
II
III*
II
II
II
II
II
III*
II
II
II
II*
II*
III*
III*
—
II
III*
III*
—
II
III*
II
—
II
II
II
II
II
II
II
*
*
—
II
II
*
II
II*
II*
II
II
II
II
III*
II
II
APPLICATION
Cereal Cooker
Dough Mixer
Meat Grinders
GENERATORS —
(Not Welding)
HAMMER MILLS
LAUNDRY WASHERS
Reversing
LAUNDRY TUMBLERS
LINE SHAFTS
Heavy Shock Load
Moderate Shock Load
Uniform Load
LUMBER INDUSTRY
Barkers —
Spindle Feed
Barkers-Main Drive
Carriage Drive
Conveyors-Burner
Conveyors-Main or
Heavy Duty
Conveyors-Main Log
Conveyors —
Merry-go-Round
Conveyors-Slab
Conveyors-Transfer
Conveyors-Waste
Chains-Floor
Chains-Green
Cut-Off Saws-Chain
Cut-Off Saws-Drag
Debarking Drums
Feeds-Edger
Feeds-Gang
Feed-Trimmer
Log Deck
Log Hauls-Well Type
Log Turning Devices
Planer Feed
Planer Tilting Hoist
Rolls-Live-Off
Brg.-Roll Cases
Sorting Table
Tipple Hoist
Transfers-Chain
Transfers-Craneway
Tray Drives
Veneer Lathe Drives
MACHINE TOOLS
Bending Roll
Notching Press —
Belt Driven
Plate Planer
Punch Press —
Gear Driven
Tapping Machines
CLASS OF SERVICE
3-10
HRS/DAY
III
II
II
III
II
II
III
*
II
II
III
II
III
II
II
II
II
II
II
III
II
III
II
III
III
III
II
II
III
II
II
II
II
II
*
II
*
I
II
II
I
I
III
III
III
10-24
HRS/DAY
* Refer to factory
Applications requiring frequent stops and starts, high inertia loads or oversized brakes or clutches (exceeding motor full load torque) should be referred to
NORDGEAR for rewiew.
II
II
II
II
III*
II
II
III*
II
II
III*
III
III*
III
III
III
III
III
III
III*
III
III*
III*
III
II
III*
III*
III*
III
III
III*
III
III
III
III
III
*
III
III*
*
III
II
*
III*
III
III* www.nord.com
A9
AGMA GEAR MOTOR LOAD CLASSIFICATION
Other Machine Tools
Main Drives
Auxillary Drives
METAL MILLS
Bridle Roll Drives
Draw Bench-Carriage
Draw Bench —
Main Drive
Forming Machines
Pinch Dryer &
Scrubber Rolls,
Reversing
Slitters
Table Conveyors
Non-Reversing
Reversing
Winding Reels-Strip
Wire Drawing &
Flattening Machine
Wire Winding
Machine
MILLS, ROTARY TYPE
Ball
Cement Kilns
Dryers & Coolers
Kilns
Pebble
Rod
Tumbling Barrels
MIXER
Concrete Mixers,
Continous
Concrete Mixers,
Intermittent
Constant Density
Variable Density
OIL INDUSTRY
Chillers
Oil Well Pumping
Parafin Filter Press
APPLICATION
Rotary Kilns
PAPER MILLS
Aerators
Agitators (Mixers)
Barker Auxilliaries,
Hydraulic
Barker, Mechanical
Barking Drum
Beater & Pulper
Bleacher
Calenders
Calenders-Super
Converting Machines, except Cutters,
Platters
CLASS OF SERVICE
3-10
HRS/DAY
10-24
HRS/DAY
II
I
III
III
III
III
II
II
—
—
II
II
III
II
II
III
III
III
II
I
I
*
*
II
II
*
II
II
*
II
—
—
—
—
—
—
—
—
II
II
III*
III*
III*
III*
*
II
III
III
III
III
II
III*
*
II
II
III*
III*
III*
II
—
II
II
II
*
II
II
*
II
III
III
III*
II*
II
II*
II
II
APPLICATION
Conveyors
Conveyors, Log
Couch
Cutters, Platers
Cylinders
Dryers
Felt Stretcher
Felt Whipper
Jordans
Presses
Pulp Machines, Reel
Stock Chests
Suction Roll
Washer & Thickeners
Winders
PRINTING PRESSES
PULLERS
Barge Haul
PUMPS
Centrifugal
Proportioning
Reciprocating
Single Acting 3 or
More Cylinders
Double Acting 2 or
More Cylinders
Single Acting 1 or
2 Cylinders
Double Acting
Single Acting
Rotary — Gear Type
— Lobe, Vane
RUBBER INDUSTRY
Mixer
Rubber Calender
Rubber Mill
(2 or more)
Sheeter
Tire Building Machines
Tire & Tube
Press Openers
Tubers & Strainers
SEWAGE DISPOSAL
EQUIPMENT
Aerators
Bar Screens
Chemical Feeders
Collectors, Circuline or Straightline
Dewatering Screens
Grit Collectors
Scum Breakers
Slow or Rapid Mixers
Sludge Collectors
Thickeners
CLASS OF SERVICE
3-10
HRS/DAY
—
—
—
—
—
—
—
—
—
—
I
—
—
—
—
—
10-24
HRS/DAY
II*
II
II
II*
II*
II
III*
II
II
III*
II*
III*
II
II*
II
II
III
I
II
II
II
I
I
*
*
III
II
II
II
*
*
II
III*
II
II*
II
II
*
*
II
II
III*
II*
II*
II*
*
*
II
APPLICATION
Vacuum Filters
SCREEN
Air Washing
Rotary —
Stone or Gravel
Traveling Water
Intake
SLAB PUSHERS
STEERING GEAR
STOKERS
TEXTILE INDUSTRY
Batchers
Calenders
Card Machines
Cloth Finishing
Machines,
(Washer, pads, tenters)
(Dryers, Calenders, etc.)
Dry Cans
Dryers
Dyeing Machinery
Knitting Machines
(looms, etc.)
Looms
Mangles
Nappers
Pads
Range Drives
Slashers
Soapers
Spinners
Tenter Frames
Washer
Winders (other than
(Batchers)
Yarn Preparatory
Machines (Cards,
Spinners, Slashers, etc.)
WINDLASS
I
I
II
I
I
II
II
I
*
II
*
*
II
II
II
II
II
II
II
II
II
CLASS OF SERVICE
3-10
HRS/DAY
II
10-24
HRS/DAY
II
I
II
II
II
II
II
II
II
II
II
II
*
I
I
*
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II*
II
II
II
II
II
II*
II
II
II
II
II
*
II
II
II
*
II
II
* Refer to factory
Applications requiring frequent stops and starts, high inertia loads or oversized brakes or clutches (exceeding motor full load torque) should be referred to
NORDGEAR for review.
A10 www.nord.com
AGMA GEAR REDUCER LOAD CLASSIFICATION
APPLICATION
NORMAL INDUSTRIAL
USAGE
Steady load not exceeding normal rating of motor or intermittent shock
Moderate shock
Heavy shock
AGITATORS
Pure Liquid
Variable density
BLOWERS
Centrifugal
Lobe
BREWING AND DISTILLING
Bottling machinery
Brew kettles, continous duty
Cookers, continous duty
Mash tubs, continous duty
Scale hooper (frequent starting)
CAR DUMPERS
CAR PULLERS
CLARIFIERS
CLASSIFIERS
CLAY WORKING
MACHINERY
Brick press
Briquette machine
Clay working machinery
Pug mill
COMPRESSORS
Centrifugal
Lobe
Reciprocating multi-cylinders
(within 3% cyclic variation)
Reciprocating, single cylinder
CONVEYORS
(Uniformly loaded or fed)
Flight, Oven, Screw
CONVEYORS
(Heavy duty or dual drive not uniformly fed)
Apron, Assembly, Belt
Bucket, Flight
Oven, Screw
Reciprocating, Shaker
CRANES & HOISTS
Main hoists - medium duty
- heavy duty
Skip hoists
Travel motion
Trolley motion
SERVICE
FACTOR
8 to 10 hour
Service
24 hours
Service
1.00
1.25
1.75
1.00
1.25
1.00
1.25
1.00
1.00
1.00
1.00
1.25
1.75
1.25
1.00
1.25
1.75
1.75
1.25
1.25
1.00
1.25
1.25
Refer to
1.00
1.25
1.25
1.25
1.75
1.25
1.25
1.25
1.25
1.50
1.75
1.75
1.50
1.50
1.50
factory
1.50
1.50
1.50
1.75
APPLICATION
1.25
1.50
Refer to factory
DREDGES
Cable reels, Conveyors
Cutter head drives
Jig drive, Screen drive
Stackers
Utility winches
ELEVATORS
(Conveyor type - same as conveyors)
1.25
1.50
1.25
1.50
1.75
1.50
1.25
1.50
1.25
1.50
1.25
FANS
Centrifugal
Cooling towers
Large (mine, etc.)
Light small diameter
FOOD INDUSTRY
Beet slicer
Cereal cookers
Dough mixer
Meat grinder
HOISTS - See Cranes
LAUNDRY WASHERS
LAUNDRY TUMBLERS
MACHINE TOOLS
Punch press ( gear connected to toad)
Notching press (belt driven)
Plate planers
Other machine tools main drives
Auxiliary drives (Feed
Traverse, etc.)
1.25
1.25
METALL MILLS
Draw bench carriage and main drives
Forming machines
Pinch, dryer and scrubber rolls (reversing)
Slitters
Small rolling mill, drives
Table conveyors (non reverse)
Table conveyors (reversing)
Wire drawing and flattening machines
1.75
Refer to
1.75
1.25
1.00
1.00
1.75
Refer to
MILLS (ROTARY TYPE)
Ball, dryer cooler
Cement kilns, pebble rod
Kilns
Tumbling barrels
1.25
1.75
MIXERS
Concrete mixers - continous
Concrete mixers - intermittent
Constant density
Variable density
1.25
Refer to
1.25
SERVICE
FACTOR
8 to 10 hours service
24 hours
Service
1.25
1.75
1.75
1.25
1.25
Refer to
Factory
1.00
Ref.to
1.25
1.00
1.25
1.00
1.25
1.25
1.50
1.75
1.75
1.50
1.50
Refer to
Factory
1.25
Factory
1.50
1.25
1.50
1.25
1.50
1.50
1.50
1.50
1.75
Factory
1.75
1.50
APPLICATION
SERVICE
FACTOR
8 to 10 hours
Service
24 hours
Service
LINE SHAFTS
Driving processing equipment
Other line shafts
1.25
1.00
PAPER MILL
Bleacher presses
Conveyors, suction roll
Winders
Agitators (mixers)
Dryer, felt stretcher
Stock chest calenders
Beater & pulper
Jordans
Couch, cylinders
RUBBER INDUSTRY
Mixer
Rubber calender
Rubber mill
Tire building machines
Tire and tube press openers
Tubers or strainers
PUMPS
Centrifugal
Gear and rotary - constant density fluid
Gear and rotary - variable density fluid
Proportioning pumps
Reciprocating with open discharge
Reciprocating - multicylinder, double acting
Reciprocating - single cylinder
Reversing duty
SEWAGE DISPOSAL
EQUIPMENT
Inside service
—
—
1.75
Refer to
Factory
—
1.00
1.00
2.00
1.25
1.00
SCREENS
Rotary - stone or gravel
Traveling water intake
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
Refer to
Factory
1.50
1.25
1.75
1.75
1.75
Refer to
Factory
1.50
1.25
1.25
2.00
1.50
2.00
1.50
Refer to
Factory
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.75
1.50
—
—
1.25
1.75
1.25
1.25
1.75
Factory
1.50
1.75
1.50
Factory
1.50
1.50
1.50
1.50
1.75
OIL INDUSTRY
Oil well pumping ( not over 150% peak torque)
Refineries
Chillers, rotary kiln
Paraffin filter press
TEXTILE INDUSTRY
Batchers, calenders
Card machine, dry cans
Dyeing machinery, mangles
Nappers, soapers
Spinner, tenter frames
1.00
1.25
1.00
1.75
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.25
1.75
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.25
1.75
Refer to factory
1.50
1.75
Refer to factory
The application service factors shown above are considered typical for most applications. Where loads are lighter than normal, where units are operated seasonally, or where unusual severe conditions exist, refer to factory.
www.nord.com
1.25
1.00
1.00
1.25
1.50
—
1.25
1.50
A11
EXPLANATORY NOTES
BELTBOX OPTIONS
The built-in adjusting pulleys are proven components, produced in large quantifies and operational in any position.
The adjusting pulleys are maintenance free, i.e. they have been equipped with rustproof guides. All other components have also been manufactured from corrosion-proof material and prepared for maintenance free operation.
Precise and strong guides ensure a long operation-life and smooth running. The built-in spring with its optimized characteristic complete belt adjusting range.
The pulleys have a low moment of inertia with surfaces of non-abrasive light-metal (important for reversing and inching operations).
Todays high capacity V-belts can be used to their full performance range. The symmetrical cross-section and constant axial pressure guarantees optimum power transmission with a high degree of efficiency, long working life and excellent running qualities.
As standard the V-belts are electrically conductive. They have a profiled inner- and outer-contour and are very flexible. Both sides are machined for smooth operation.
R 100 R 150
22,5x7x 578
28 °
28x7x754
28 °
V - BELT DIMENSIONS
(all dimensions mm)
R 250 R 280 R 300 R 196 R 210 R 350 R 375 R 400 R 500
33x9x906
28 °
37x10x950 47x12x1135 55x13x1270 51x16x1528 72x22x1500 83x23x1767 83x23x1842 83x26x2877
28 ° 28 ° 28 ° 28 ° 30 ° 32 ° 32 ° 32 °
ADJUSTING SPEED WITH MANUAL CONTROL
When adjusting speed the motor should be turned on.
If adjustments are made with the motor turned off, damage to the belt box and associated machinary can occur.
STANDARD HANDWHEEL
Type y n
D x
R 100 R 150 R 196 R 210 R 250 R 280 R 300 R 350 R 375 R 400 R 500
3.94
0.60
5.87
10.2
3.94
0.87
6.26
12.5
4.92
1.06
7.56
13.5
4.92
1.22
7.79
15.5
4.92
1.46
9.25
18.5
9.42
1.73
9.84
1.57
9.84
1.97
9.84
1.89
9.84
1.97
9.84
2.28
9.49
11.02
11.42
12.99
13.39
13.78
22.0
20.0
25.0
16.0
16.7
19.3
To cover the entire speed range, the number of full turns of the handwheel as listed in the tables are required (n).
Unless otherwise indicated the control will be mounted as shown.
A12
Technical design may be subject to change.
www.nord.com
EXPLANATORY NOTES
Angular control, type WST
Type R 100 R 150 R 196 R 210 R 250 R 280 R 300 R 350 R 375 R 400
D a b y n
3.94
4.45
4.02
3.94
5.32
4.02
4.92
5.39
4.33
4.92
5.39
4.33
6.30
6.14
4.53
6.30
6.14
4.53
7.87
9.84
5.91
7.87
9.84
5.91
7.87
9.84
5.91
5.59
6.42
6.50
6.50
7.28
7.28
11.42
11.42
11.42
10 15 18 21 25 29 13 17 16
To cover the entire speed range, the number of full turns of the handwheel as listed in the tables are required (n).
Unless otherwise indicated the control will be mounted as shown.
9.84
9.84
5.91
11.42
17
HANDWHEELS WITH SPEED INDICATING DIAL
The simplest and most economic solution is to factory install a dial into the handwheel. Dial handwheels can be used with horizontal spindles and spindles inclined by up to 60
É to the horizontal. These indicators count the rotations of the handwheel up to 18 turns. Factory sets to zero at the lowest possible speed.
As speed is increased, a count of the handwheel rotations is displayed for reference.
Type
D
R 100 R 150 R 196 R 210 R 250 R 280 R 300 R 350 R 375 R 400 R 500
3.15
4.92
4.92
4.92
6.30
6.30
9.84
9.84
9.84
9.84
9.84
ADJUSTING SPEED WITH ELECTROMECHANICAL REMOTE CONTROL EMFST
The drive leaves the factory set to the speeds indicated in the name plate and at minimum speed.
SPEEDUP
P.B.
SPEEDUP
L.S.
OL’S
S
TOP
F
STARTER AND
PUSH BUTTONS
NOT SUPPLIED
F
S
P.B.
BOTTOM
L.S.
S
S
S
SLOW
230 VAC 460 VAC
L1
L2
L3
F
F
F
FAST OL
OL
OL
MOTOR
T1 T2 T3 T1 T2 T3
L1 L2 L3 L4 L5 L6
Customer must supply starter, fuses and push buttoms. This version is a worm gear motor with limit switches and potentiometer.
www.nord.com
Type y Adjustment period min. to max. in seconds
R 100
R 150
R 196
R 210
R 250
R 280
R 300
R 350
3.39
3.39
3.90
3.90
4.84
4.84
4.84
4.84
23
28
25
30
13
18
23
26
Electrical remote control for R 375, R 400 and R 500 available on request !
Technical design may be subject to change.
A13
EXPLANATORY NOTES
REPLACEMENT OF-V-BELT
Easy V-belt replacement:
Unscrew the socket head screws and remove cover together with the entire speed control. Remove V-belt. Wrap the new V-belt around the open adjustable pulley and then slip it over the spring loaded pulley. The V-belt can be easily installed if the adjustable pulley is opened by installing a tapered wedge of soft pine between the spring pulleyhalves to keep them seperated. Every new V-belt may stretch sightly but after a few hours of operation the full range of adjustment is available.
REPLACEMENT OF PULLEYS
The spring loaded pulley and adjustable pulley are located securely their shafts by a screw (519), a thrust washer (518), and a snap ring (520). The thrust washer and the snap ring of the pulley can also be used for jacking off the pulley. Remove the screw, washer and snap ring and place a steel disc (l) against the end of the shaft to protect the tapped hole in the shaft.
Replace the thrust washer and install the snap ring. The thrust washer has an internal thread larger than the screw (519). Remove spring loaded pulley or adjustable pulley.
Before installing the new pulley, spray the shaft with a Molykote compound. Assemble the thrust washer and snap ring into the pulley bore and pull the pulley onto the shaft with the screw (519). Do not drive the pulley on with a hammer.
519 520 518 I II III
518
520
If the thrust washer (518) also rotates when removing the pulley, secure the thrust washer with a pin (II) inserted in the keyway.
Please ensure the spring loaded and adjustable pulleys are exactly mounted as shown on page A7. Assembling pulley the wrong way can damage the machinery.
Special care has to be taken with the Z-design.
Please note that the moving parts of the pulleys must always be situated on opposite (diagonal) sides.
NON CONTACTING SPEED INDICATOR
Type BLA - with analog indicator
Type BLD- with digital indicator
ELECTRO-MECHANICAL REMOTE CONTROL,
EMFST WITH REMOTE SPEED INDICATOR
Type FAA - with analog indicator
Type FAD- with digital indicator
BLD
FAA
Type BLA:
The speed indicator contains a built-in pulse sensor which converts the signals coming from the pulse generator into a direct current which is connected to the analog indicator.
Adjustment of the meter is possible by means of set screws on the back of the meter.
Type of Enclosure: IP 53 - Terminals IP 00
Scale marking: 0-100 %
Scale deflection: 90 É
Type FAA:
In addition to the electro-mechanical remote control the remote speed indicator is available, showing the speed setting in percent.
Type of enclosure: IP 21 - Terminals IP 00
Marking of Scale: 0-100 %
Scale deflection: 90 É
Type BLD:
The digital indicator has a 4 digit - 7 segment red LEDdisplay,
Type of enclosure: IP 50 - Terminals IP 00.
Type FAD:
The digital indicator has a 4
1
/
2 digit - 7 segment red LEDdisplay,
Type of enclosure: Casing IP 20, Terminals IP 00.
A14 www.nord.com
VARIABLE SPEED HELICAL GEAR UNITS www.nord.com
B1
VARIABLE SPEED HELICAL GEAR UNITS
NOMENCLATURE
GEAR TYPE
FOOT MOUNTED
SK 02 - SK 102
SK 63 - SK 103 =
=
FLANGE MOUNTED
SK 02 F - SK 102 F =
SK 63 F - SK 103 F =
Helical Gearboxes double reduction, foot mounted
Helical Gearboxes triple reduction, foot mounted
Helical Gearboxes double reduction, flange mounted
Helical Gearboxes triple reduction, flange mounted
HELICAL GEAR UNITS - OPTIONS see catalog 1000
VARIABLE SPEED TYPE
R 100 U
R 150 U
R 196 U
R 210 U
R 250 U
R 280 U Variable speed drives U design
R 300 U
R 350 U
R 375 U
R 400 U
R 500 U
R 100 Z
R 150 Z
R 196 Z
R 210 Z
R 250 Z
R 280 Z Variable speed drives Z design
R 300 Z
R 350 Z
R 375 Z
R 400 Z
R 500 Z
STANDARD TYPE
Variable speed helical geared motor
U - design (affix: U), with control gear type ZV
Variable speed helical geared motor
Z - design (affix: Z), with control gear type ZV
B2 www.nord.com
VARIABLE SPEED GEAR UNITS
NOMENCLATURE
SPEED CONTROLS MOTOR
WST
=
=
Speed control ZV
Angular control
EMFST = Electromechanical remote control
SPEED INDICATORS
BLA = Non contacting speed indicator, analogue
BLD = Non contacting speed indicator, digital
FAA = EMFST with remote speed indicator, analogue
FAD = EMFST with remote speed indicator, digital
C - face
1/3 - 30 HP
56 C - 286 TC
IEC
40 - 150 HP
200 L/4 - 315 S/4
MOTOR OPTIONS
BRE = with brake
DG = Incremental encoder
HL = Brake motor with hand release
R = Backstop
RG = Brake corrosion-protected
SR = Brake dust-proof
TF = Thermistor
TW = Thermal trip
WE = 2 nd motor shaft end
EXAMPLE FOR ORDERING:
SK 52 R 210 U - 213 TC www.nord.com
C face motor / three phase 7.5 HP
Variable speed gear type, design U
Helical Gear Motor, 2 reductions
B3
VARIABLE SPEED GEAR UNITS
MOUNTING POSITIONS
B 3 U (Z) B 6 U (Z)
SK 02
-
SK 52
SK 62
-
SK 103
Z
Z
U
U
Z
B 8 U (Z)
U
SK 63 - SK 103
SK 62 - SK 102
SK 63 - SK 103
U
SK 62 - SK 102
SK 63 - SK 103
Z
SK 62 - SK 102
B 5 U (Z)
SK 02
-
SK 52
Z
U Z
U
Z
B 7 U (Z)
U
Z
U
B 5 I U (Z)
Z
U
SK 62
-
SK 103
Z U
Z
Symbols: Vent plug
POSITION OF TERMINAL BOX AND CABLE ENTRY
Please specify position of terminal box and cable entry !
Normal design:
1/3 - 30 HP, Terminal Box at 3. Cable entry at I or III only.
40 - 150 HP, Terminal box at 1. Cable entry at I.
If other position are required, please specify exactly when ordering.
Drain plug
SK 62 - SK 102
SK 62 -
SK 102
Oil level
I 2
1
I
I
3
U Z
IV
III
II
I
U
B4 www.nord.com
VARIABLE SPEED GEAR UNITS
MOUNTING POSITIONS
V 1 U (Z)
Z
U
V 3 U (Z) V 5 U (Z)
Z U
V 6 U (Z)
SK 02
-
SK 52
U
Z
Z
U
SK 62
-
SK 103
Symbols:
U
Vent plug
Z
Drain plug
Z
U Z
U
U
Oil level
Z
B 3/2 U
I
1
1 I
In all mounting positions the variable speed drive may be mounted at an angle of 90
0
.
affix: */1 = right , */2 = left
I
1 I
1
I
1
B 3/1 U
B 5/2 U
B 3 U
1
I B 5 U
B 5/1 U www.nord.com
B5
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
395
353
312
280
352
298
261
233
209
186
170
151
142
126
104
91.2
81.4
64.6
419
339
268
223
208
173
142
120
635
513
406
337
315
597
535
473
423
341
285
45.1
39.8
38.1
33.6
29.2
27.4
23.0
20.4
18.6
16.8
14.2
355
297
260
202
162
143
134
119
112
100
77.0
62.0
54.9
48.7
0.33
47
53
60
67
110
124
132
149
181
205
231
288
53
63
72
81
90
101
45
55
70
84
90
109
132
156
416
471
495
560
632
692
800
914
992
1141
1308
140
158
167
187
242
301
342
388
53
63
72
93
115
130
0.50
47
53
60
67
83
100
45
55
70
84
90
9.5
10.6
12.0
13.4
36
41
46
58
22
25
26
30
10.6
12.6
14.3
16
18
20
8.9
11.1
14.0
17
18
22
26
31
9.5
10.6
12.0
13.4
17
20
8.9
11.1
14.0
17
18
83
94
99
112
126
138
160
183
198
228
262
48
60
68
78
28
32
33
37
10.6
12.6
14.4
19
23
26
2.3
2.8
2.9
3.5
1.5
1.9
1.5
1.9
2.5
2.9
3.2
4.0
1.0
1.0
1.0
1.1
1.4
1.6
1.0
1.4
1.9
2.3
2.4
3.2
3.6
3.6
1.0
1.0
1.2
1.5
1.6
1.5
1.9
1.9
2.3
2.8
2.8
2.5
2.8
2.9
3.2
3.1
3.7
4.3
4.2
5.0
5.5
5.7
1.2
1.3
1.2
1.3
1.6
2.0
2.2
2.3
1.0
1.0
1.0
1.0
1.0
1.1
1974
1770
1558
1398
1230
1310
1310
1159
1044
929
851
757
708
629
517
456
406
325
2000
1690
1345
1115
1035
863
712
600
2991
2673
2363
2115
1699
1425
2000
2328
2036
1690
1575
668
592
561
500
387
312
273
242
681
681
681
814
812
719
226
199
189
167
148
135
117
103
94.7
25.2
82.3
26.8
71.7
28.8
12.7
14.0
14.7
16.1
15.8
18.4
21.9
21.3
8.3
10.0
10.8
11.6
5.8
6.6
6.1
6.5
1.9
2.3
2.6
4.0
5.2
5.7
7.6
9.3
9.6
11.7
13.8
13.9
3.2
4.5
6.2
7.7
8.0
11.5
14.0
14.5
17.7
12.6
14.4
15.8
20.0
7.8
9.6
7.8
9.6
3.5
4.4
5.0
5.6
6.9
7.8
4.8
6.9
9.4
11.6
12.1
16.0
18.1
18.1
81.27
72.76
64.26
57.53
72.63
61.35
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
86.30
69.81
55.28
45.90
42.82
35.55
29.31
24.73
81.27
72.76
64.26
57.53
46.31
38.76
86.30
69.81
55.28
45.90
42.82
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
73.06
61.27
53.68
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
SK 32 - R100 Z - 56 C
SK 22 - R100 Z - 56 C
SK 12 - R100 U/Z - 56 C
SK 02 - R100 U/Z - 56 C
SK 32 - R100 Z - 56 C
SK 22 - R100 Z - 56 C
Weight approx.
[Lbs]
(460 V)
I
N
[A]
121 0.8
i
Regel
5.00
97
68
64
121
97
0.8
0.8
0.8
1.1
1.1
5.00
5.00
5.00
5.00
5.00
B6 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
0.75
47
53
60
67
83
100
117
127
142
167
186
207
388
416
471
495
560
632
692
800
914
992
1141
1308
130
140
158
167
187
242
301
342
53
63
72
93
115
45
55
70
0.50
109
132
156
110
124
132
149
181
205
231
53
63
72
81
90
101
288
360
400
451
491
530
22
26
31
58
72
80
90
98
106
22
25
26
30
36
41
46
10.6
12.6
14.3
16
18
20
112
126
138
160
78
83
94
99
183
198
228
262
37
48
60
68
26
28
32
33
10.6
12.6
14.4
19
23
25
28
33
37
41
9.5
10.6
12.0
13.4
17
20
23
8.9
11.1
14.0
261
216
182
258
229
214
190
157
138
123
535
451
396
352
317
281
98.2
78.8
70.8
62.8
57.5
54.0
73.5
68.1
60.2
57.5
50.4
45.1
40.7
35.4
31.0
28.3
24.8
22.1
537
450
395
306
246
218
203
180
170
151
118
94.7
83.2
335
301
255
228
206
894
803
709
635
511
427
365
956
770
610
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 22 - R100 Z - 56 C 2.1
2.4
2.4
1.0
1.3
1.0
1.3
1.7
1.9
2.1
1.0
1.0
1.0
1.0
1.0
1.0
2.6
2.9
3.3
3.4
3.9
3.8
1.5
1.7
1.9
1.9
2.1
2.0
2.5
2.8
2.8
3.3
3.6
3.7
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.4
1.0
1.0
1.0
1.0
1.0
2.7
3.3
3.5
4.3
4.8
1.0
1.2
1.3
1.6
1.8
1.8
1.8
1.0
1.0
1.0
35.55
29.31
24.73
72.63
61.35
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
10.70
9.65
8.56
7.85
7.28
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
73.06
61.27
53.68
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
81.27
72.76
64.26
57.53
46.31
38.76
33.05
30.43
27.24
23.12
20.70
18.67
86.30
69.81
55.28
10.6
12.0
11.9
5.1
6.4
5.1
6.4
8.4
9.5
10.4
2.3
2.9
3.3
3.7
4.5
5.2
13.2
14.7
16.5
17.2
19.7
19.0
10.7
10.2
12.4
14.2
7.7
8.4
9.3
9.7
14.0
16.6
18.2
18.4
4.3
5.4
6.5
7.1
3.7
3.8
4.4
4.1
1.3
1.5
1.7
2.7
3.5
13.5
16.4
17.7
21.7
24.0
5.1
6.2
6.4
7.8
9.2
9.2
9.2
2.1
3.0
4.1
1310
1080
912
1230
1310
1310
1310
1434
1407
1292
1151
1071
956
782
691
615
492
394
355
315
289
268
366
342
301
287
253
225
204
177
155
143
124
109
814
770
788
690
655
587
472
414
681
681
681
814
850
4487
4018
3549
3177
2558
2142
1823
1682
1505
1274
1142
1027
2000
2328
2522
SK 12 - R100 U/Z - 56 C
SK 02 - R100 U/Z - 56 C
SK 32 - R100 Z - 56 C
SK 22 - R100 Z - 56 C
Weight approx.
[Lbs]
(460 V)
I
N
97
[A]
1.1
i
Regel
5.00
68
64
121
97
1.1
1.1
1.6
1.6
5.00
5.00
5.00
5.00
www.nord.com
B7
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
1195
1071
947
846
681
570
592
458
369
327
304
269
255
227
176
142
125
110
103
90.3
85.8
76.1
67.3
61.1
53.1
46.9
42.5
37.2
32.7
118
106
94.7
86.7
80.5
71.7
63.7
54.0
49.6
47.8
44.3
387
344
321
286
235
207
185
148
801
677
594
528
475
423
506
473
392
323
273
185
162
135
120
0.75
84
90
109
132
156
230
263
316
354
360
400
451
491
530
591
666
782
859
893
969
110
124
132
149
181
205
231
288
53
63
72
81
90
101
187
242
301
342
388
416
471
495
72
93
115
130
140
158
167
560
632
692
800
914
992
1141
1308
1.00
47
53
60
67
83
100
78
83
94
99
37
48
60
68
14.4
19
23
26
28
32
33
112
126
138
160
183
198
228
262
9.5
10.6
12.0
13.4
17
20
106
118
133
156
72
80
90
98
172
179
194
36
41
46
58
22
25
26
30
10.6
12.6
14.3
16
18
20
31
46
53
63
17
18
22
26
71
5.2
5.6
6.2
6.5
2.9
3.6
4.4
4.8
1.2
1.8
2.3
2.5
2.5
2.9
2.7
9.2
11.0
12.1
12.4
7.1
6.8
8.3
9.5
3.8
4.6
4.8
5.9
6.9
6.9
9.8
11.0
11.4
13.1
12.7
15.3
16.5
18.7
20.7
19.4
22.4
5.6
6.3
6.9
8.7
3.4
4.2
3.4
4.2
1.5
1.9
2.2
2.5
3.0
3.4
8.0
13.6
15.6
20.5
5.1
5.3
7.0
8.0
22.8
4531
4859
4292
3841
3098
2593
655
637
620
593
549
512
452
430
681
814
850
814
770
788
690
380
336
307
266
233
214
187
163
590
533
473
433
402
360
319
272
248
238
219
1230
1310
1310
1310
1434
1451
1319
1460
1097
1212
1177
1035
920
739
2531
2363
1965
1620
1363
920
811
673
601
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.4
1.4
1.6
1.9
1.9
2.2
2.4
2.5
1.0
1.0
1.1
1.3
1.5
1.5
2.0
2.2
2.3
2.6
2.6
3.0
3.3
3.7
4.1
3.9
4.5
1.0
1.0
1.0
1.0
1.1
1.3
1.4
1.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.4
1.6
1.6
2.7
3.1
4.1
4.6
53.68
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
81.27
72.76
64.26
57.53
46.31
38.76
10.70
9.65
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
3.98
72.63
61.35
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
45.90
42.82
35.55
29.31
24.73
16.75
14.69
12.20
10.89
SK 22 - R100 Z - 56 C
SK 12 - R100 U/Z - 56 C
SK 02 - R100 U/Z - 56 C
SK 32 - R100 Z - 143 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
97 1.6
i
Regel
5.00
68
64
135
1.6
1.6
2.1
5.00
5.00
5.00
B8 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
1.00
117
127
142
167
186
207
132
149
181
205
231
288
360
400
90
101
110
124
53
63
72
81
451
491
530
591
666
782
859
893
969
187
242
301
342
388
416
471
495
93
115
130
140
158
167
560
632
692
132
156
230
263
316
354
455
45
55
70
84
90
109
26
31
46
53
63
71
91
8.9
11.1
14.0
17
18
22
23
25
28
33
37
41
46
58
72
80
26
30
36
41
18
20
22
25
10.6
12.6
14.3
16
90
98
106
118
133
156
172
179
194
78
83
94
99
37
48
60
68
19
23
26
28
32
33
112
126
138
1266
1027
813
675
630
523
431
364
246
216
180
160
125
486
448
401
340
304
274
429
381
313
276
246
197
158
142
1071
903
792
704
634
564
516
458
126
115
107
96.5
85.0
72.6
66.4
63.7
58.4
303
235
189
165
146
136
120
115
612
492
435
404
358
340
102
89.4
82.3
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 32 - R100 Z - 143 TC
1.3
1.3
2.3
2.6
3.4
3.8
4.0
1.0
1.0
1.0
1.0
1.0
1.2
1.5
2.2
2.7
2.9
3.6
4.0
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.9
2.2
2.1
2.5
2.7
3.1
3.4
3.2
3.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.1
1.4
33.05
30.43
27.24
23.12
20.70
18.67
86.30
69.81
55.28
45.90
42.82
35.55
29.31
24.73
16.75
14.69
12.20
10.89
8.48
29.15
25.92
21.28
18.79
16.73
13.39
10.70
9.65
72.63
61.35
53.84
47.87
43.09
38.31
35.07
31.19
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
3.98
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
6.0
6.0
10.3
11.7
15.3
17.1
18.4
1.6
2.3
3.1
3.8
4.0
5.3
6.9
10.1
12.3
13.3
16.2
18.0
5.2
6.5
7.4
8.2
2.6
3.2
4.2
4.7
2.3
2.6
2.6
3.2
1.1
1.5
1.7
1.9
8.6
9.8
9.6
11.4
12.4
13.9
15.5
14.6
17.0
3.9
4.2
4.6
4.8
2.2
2.7
3.3
3.6
1.3
1.7
1.9
1.9
2.2
2.0
5.3
5.1
6.1
2213
2036
1823
1549
1381
1248
2000
2328
2522
2584
2522
2372
1956
1655
1115
982
815
727
566
1097
1212
1310
1257
1115
894
715
645
1230
1310
1310
1310
1434
1451
1319
1460
572
525
487
436
387
329
300
289
266
655
637
620
593
566
575
547
521
814
850
814
770
788
690
460
408
373
SK 22 - R100 Z - 143 TC
SK 12 - R100 U/Z - 143 TC
SK 02 - R100 U/Z - 143 TC
Weight approx.
[Lbs]
(460 V)
I
N
135
[A]
2.1
i
Regel
5.00
110
82
77
2.1
2.1
2.1
5.00
5.00
5.00
www.nord.com
B9
VARIABLE SPEED HELICAL GEARED MOTORS
53
63
71
91
22
26
31
46
8.9
11.1
14.0
17
18
25
29
33
36
17
18
20
22
41
8.3
9.3
10.5
11.8
14.6
160
183
198
228
262
23
25
28
33
37
41
9.5
10.6
12.0
13.4
17
20
40
46
55
62
23
27
29
34
80
89
7.8
9.7
12.2
14.7
16
19
20
109
132
156
230
263
316
354
455
45
55
70
84
90
105
109
123
133
149
176
196
217
244
50
56
63
71
88
1.00
800
914
992
1141
1308
1.50
47
53
60
67
83
100
117
127
142
167
186
207
141
164
171
203
242
276
333
373
479
536
47
58
73
88
95
114
117
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
1903
1540
1221
1009
947
784
647
546
370
324
269
241
187
1708
1522
1345
1204
974
812
781
693
638
571
485
434
391
350
1797
1602
1416
1266
1018
855
729
672
601
510
457
412
70.8
62.0
57.5
49.6
43.4
604
519
497
420
351
308
256
228
178
158
1805
1460
1159
965
894
745
727
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 02 - R100 U/Z - 143 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
77 2.1
1.2
1.3
1.3
2.3
2.6
3.4
3.8
4.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.0
1.2
1.5
1.6
2.0
2.2
2.3
1.0
1.0
1.0
1.0
1.0
1.5
2.2
2.7
2.9
3.6
4.0
1.0
1.0
1.1
1.3
1.5
1.5
1.6
1.5
1.8
2.0
2.1
1.0
1.0
1.0
1.1
1.3
1.4
1.9
2.1
2.3
2.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
86.30
69.81
55.28
45.90
42.82
35.55
29.31
24.73
16.75
14.69
12.20
10.89
8.48
81.27
72.76
64.26
57.53
46.25
38.76
37.23
33.05
30.43
27.24
23.12
20.70
18.67
16.66
4.82
4.22
3.89
3.38
2.95
81.27
72.76
64.26
57.53
46.31
38.76
33.05
30.43
27.24
23.12
20.70
18.67
86.30
69.81
55.28
45.90
42.82
35.55
34.69
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
7.57
7.8
10.2
11.4
12.3
3.5
4.0
4.0
6.8
1.1
1.5
2.1
2.6
2.7
8.7
9.3
11.4
12.6
4.9
6.6
4.9
7.1
13.4
2.7
3.3
3.4
4.1
5.1
4.6
6.7
8.2
8.9
10.8
12.0
2.5
3.1
3.2
3.9
4.6
4.6
7.1
7.0
8.2
9.1
9.4
7.2
8.2
10.8
12.0
4.6
4.2
5.4
6.0
12.9
13.7
1.1
1.6
2.2
2.7
2.8
3.7
3.5
2000
2328
2522
2584
2522
2372
1956
1655
1115
982
815
727
566
4531
4956
4531
4956
4956
3947
4460
3363
3646
3266
2770
2478
2239
2000
4531
4859
4292
3841
3098
2593
2213
2036
1823
1549
1381
1248
322
282
260
226
197
2752
2177
2673
2398
2009
1761
1460
1310
1018
912
2000
2328
2522
2584
2522
2761
2522
SK 32 - R100 Z - 145 TC
SK 32 - R150 U/Z - 145 TC
SK 22 - R100 Z - 145 TC
SK 22 - R150 U/Z - 145 TC
135
150
110
126
3.0
3.0
3.0
3.0
i
Regel
5.00
5.00
6.00
5.00
6.00
B10 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
2.00
47
53
60
67
83
100
117
127
142
167
186
207
187
242
301
342
388
416
471
495
115
130
140
158
167
560
632
692
800
914
992
1141
1308
1.50
72
81
231
288
360
400
451
491
530
90
101
110
124
132
149
181
205
591
666
782
859
893
969
50
56
63
71
88
105
78
83
94
99
37
48
60
68
23
26
28
32
33
112
126
138
160
183
198
228
262
26
30
36
41
46
58
72
14.3
16
18
20
22
25
80
90
98
106
118
133
156
172
179
194
25
28
33
37
41
9.5
10.6
12.0
13.4
17
20
23
8.3
9.3
10.5
11.8
14.6
17
454
352
283
249
219
204
181
172
737
653
607
538
511
152
135
123
106
92.9
85.8
74.3
65.5
1186
1053
947
845
773
689
643
572
470
415
369
296
236
213
189
173
161
144
127
109
99.1
95.6
87.6
2390
2142
1894
1690
1363
1142
974
894
802
681
609
550
2274
2036
1797
1611
1292
1080
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 12 - R100 U/Z - 145 TC
Weight approx.
[Lbs]
(460 V)
I
N
82
[A]
3.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.2
1.1
1.4
1.6
1.5
1.8
2.0
2.1
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.0
1.0
1.0
1.0
1.0
1.0
1.8
1.9
2.2
2.1
2.5
2.7
3.1
3.4
3.2
3.7
2.2
2.7
2.9
3.6
4.0
1.0
1.0
1.1
1.3
1.5
1.5
1.5
1.0
1.0
1.0
1.0
1.0
1.0
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
10.70
9.65
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
3.98
81.27
72.76
64.26
57.53
46.31
38.76
33.05
30.43
27.24
23.12
20.70
18.67
81.27
72.76
64.26
57.53
46.25
38.76
2.6
2.8
3.1
3.2
1.4
1.8
2.2
2.4
1.2
1.2
1.3
1.5
1.4
4.7
5.5
6.1
6.2
3.5
3.4
4.1
4.8
1.7
2.1
2.8
3.2
3.5
4.4
4.9
1.1
1.2
1.5
1.7
1.7
2.1
7.6
8.3
9.3
10.4
5.5
5.7
6.5
6.4
9.7
11.3
5.1
6.2
6.6
8.1
9.0
1.9
2.3
2.4
2.9
3.5
3.5
3.5
2.0
2.4
2.5
3.1
3.8
3.7
655
637
620
593
566
575
547
521
850
814
770
788
690
460
408
373
322
282
260
226
197
1310
1310
1434
1451
1319
1460
1097
1212
1310
1257
1115
894
715
645
572
525
487
436
387
329
300
289
266
4531
4859
4292
3841
3098
2593
2213
2036
1823
1549
1381
1248
4531
4956
4531
4956
4956
3947
SK 02 - R100 U/Z - 145 TC
SK 32 - R100 Z - 145 TC
SK 32 - R150 U/Z - 145 TC
77
135
150
3.0
3.4
3.4
i
Regel
5.00
5.00
5.00
6.00
www.nord.com
B11
VARIABLE SPEED HELICAL GEARED MOTORS
23
27
29
34
40
46
55
9.7
12.2
14.7
16
19
20
62
80
89
46
53
63
71
91
11.1
14.0
17
18
22
26
31
29
33
36
41
18
20
22
25
90
98
106
118
46
58
72
80
26
30
36
41
18
20
22
25
133
156
172
179
194
32
37
48
2.00
109
123
133
149
176
196
217
244
231
288
360
400
451
491
530
591
90
101
110
124
132
149
181
205
666
782
859
893
969
158
187
242
141
164
171
203
242
276
333
58
73
88
95
114
117
373
479
536
230
263
316
354
455
55
70
84
90
109
132
156
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
1956
1549
1283
1195
991
974
805
691
664
560
468
411
341
304
237
212
2053
1628
1354
1257
1044
862
727
493
432
359
320
250
1044
920
850
761
646
579
522
466
492
394
315
284
252
231
214
192
1266
1124
1035
920
858
763
626
553
170
145
132
127
117
718
606
469
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 32 - R150 U/Z - 145 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
150 3.4
1.0
1.0
1.0
1.1
1.3
1.4
1.9
1.0
1.0
1.0
1.0
1.0
1.0
2.1
2.3
2.4
2.3
2.6
3.4
3.8
4.0
1.0
1.0
1.0
1.0
1.2
1.3
1.3
1.2
1.0
1.2
1.5
1.6
2.0
2.2
2.3
1.2
1.4
1.6
1.8
1.9
2.2
2.1
2.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.7
3.1
3.4
3.2
3.7
1.0
1.0
1.0
69.81
55.28
45.90
42.82
35.55
34.69
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
7.57
69.81
55.28
45.90
42.82
35.55
29.31
24.73
16.75
14.69
12.20
10.89
8.48
37.23
33.05
30.43
27.24
23.12
20.70
18.67
16.66
16.73
13.39
10.70
9.65
8.56
7.85
7.28
6.53
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
5.79
4.93
4.49
4.32
3.98
24.39
20.59
15.95
3.4
3.1
4.0
4.5
5.4
6.1
8.1
1.2
1.6
2.0
2.1
2.8
2.6
9.0
9.7
10.3
5.1
5.8
7.7
8.6
9.2
1.1
1.5
1.9
2.0
2.6
3.0
3.0
7.0
8.5
9.5
10.1
5.0
3.7
5.3
6.5
4.3
4.9
4.8
5.7
2.6
3.3
3.7
4.1
1.3
1.6
2.1
2.4
1.1
1.3
1.3
1.6
6.2
7.0
7.8
7.3
8.5
1.1
1.1
1.4
2328
2522
2584
2522
2761
2522
2752
2177
2673
2398
2009
1761
1460
1310
1018
912
2328
2522
2584
2522
2372
1956
1655
1115
982
815
727
566
4460
3363
3646
3266
2770
2478
2239
2000
1115
894
715
645
572
525
487
436
1434
1451
1319
1460
1097
1212
1310
1257
387
329
300
289
266
788
655
637
SK 22 - R100 Z - 145 TC
SK 22 - R150 U/Z - 145 TC
SK 12 - R100 U/Z - 145 TC
SK 02 - R100 U/Z - 145 TC
110
126
82
77
3.4
3.4
3.4
3.4
i
Regel
6.00
5.00
6.00
5.00
5.00
B12 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
47
52
57
68
75
83
101
106
9.8
12.2
13.8
17
20
25
28
34
42
47
58
2.00
301
342
388
416
471
495
560
632
692
800
914
992
1141
1308
3.00
10.9
13.5
15.0
19
22
28
31
38
38
47
52
65
39
48
54
67
80
98
68
75
91
95
42
47
51
61
100
7.8
8.6
9.5
11.4
12.6
13.8
17
18
4.2
4.6
5.7
7.0
7.9
9.7
1.6
2.0
2.3
2.8
3.4
5.1
6.3
6.3
7.8
8.7
10.8
1.8
2.3
2.6
3.2
3.7
4.6
112
126
138
160
183
198
228
262
60
68
78
83
94
99
6.4
8.0
9.0
11.2
13.3
16
7.0
7.8
8.5
10.2
11.3
12.5
15.0
16
17
3646
3292
2991
2496
2257
2053
1690
1611
17319
13974
12346
9956
8399
6779
6168
4974
4053
3602
2921
15611
12594
11124
8974
7576
6107
5558
4522
4487
3655
3248
2637
377
332
293
273
241
229
203
180
164
142
124
114
99.1
86.7
4044
3655
3319
2770
2505
2274
1876
1788
1708
4407
3567
3142
2540
2142
1735
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 02 - R100 U/Z - 145 TC
Weight approx.
[Lbs]
(460 V)
I
N
77
[A]
3.4
1.3
1.5
1.6
1.9
2.2
2.4
3.0
3.2
1.2
1.4
1.7
1.8
2.3
2.8
1.0
1.0
1.0
1.0
1.0
2.1
2.5
2.6
2.7
3.5
4.3
1.0
1.0
1.0
1.3
1.5
1.9
1.2
1.1
1.4
1.6
1.5
1.8
2.0
2.1
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.1
1.2
1.6
1.0
1.0
1.1
1.3
1.4
1.6
2.0
2.1
2.1
372.21
300.34
265.32
214.10
180.57
145.71
132.54
106.95
87.06
77.46
62.87
86.92
78.56
71.39
59.54
53.81
48.90
40.37
38.45
372.21
300.34
265.32
214.10
180.57
145.71
132.54
107.89
106.95
87.06
77.46
62.87
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
86.92
78.56
71.39
59.54
53.81
48.90
40.37
38.45
36.69
105.08
85.10
74.87
60.66
50.98
41.29
3.7
4.3
4.7
5.5
6.3
6.8
8.6
9.2
4.8
5.3
6.6
7.0
9.1
11.1
1.6
2.0
2.6
3.2
3.9
5.9
7.1
7.3
7.7
10.1
12.3
1.8
2.2
2.9
3.6
4.3
5.4
2.7
2.6
3.1
3.6
3.5
4.1
4.6
4.7
1.6
1.8
1.9
2.1
2.3
2.4
1.7
2.0
2.4
3.1
3.5
4.6
5.6
6.2
7.7
8.3
3.4
3.9
4.2
4.9
8.2
10425
9416
8558
7142
6452
5868
4841
4611
28320
28320
32214
32214
32391
26656
24249
19567
15930
14169
11505
28320
28320
31816
25674
21656
17470
15895
12939
12824
10443
9293
7540
460
408
373
322
282
260
226
197
620
593
566
575
547
521
13664
14125
13063
10894
9841
8947
7381
7036
6708
7549
7045
7549
7275
6115
4947
SK 63 - R150 Z - 145 TC
SK 63 - R196 U/Z - 182 TC
SK 52 - R150 Z - 145 TC
SK 52 - R196 U/Z - 182 TC
SK 42 - R150 Z - 145 TC
410
426
289
304
225
4.8
4.8
4.8
4.8
4.8
i
Regel
5.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
B13
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
99
104
117
131
146
55
62
80
89
29
34
40
46
12.2
14.7
16
19
20
23
27
22
26
32
36
20
22
25
29
33
36
41
42
45
47
58
8.3
9.3
10.5
11.8
14.6
17
18
21
24
25
28
5.8
7.2
8.1
10.1
12.0
14.8
17
20
19
22
23
26
27
28
31
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
991
840
703
616
512
457
356
318
2319
1920
1797
1487
1451
1204
1035
288
273
242
217
194
1310
1089
894
788
1389
1274
1142
974
868
783
698
3407
3053
2690
2416
1938
1628
1558
681
630
610
491
4885
3956
3487
2823
2372
1920
1637
1416
1363
1204
1151
1000
1478
1274
1230
1089
1035
1027
903
3.00
115
133
139
157
165
166
189
123
133
149
176
196
217
244
50
56
63
71
88
105
109
250
270
279
347
72
89
104
120
35
43
49
60
125
141
148
170
171
203
242
276
333
373
479
536
73
88
95
114
117
141
164
592
624
701
784
879
130
157
191
216
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Service factor Red. ratio
High f
B1
Low f
B2 i ges
5.4
6.0
6.4
6.9
2.7
3.0
3.6
4.1
1.1
1.3
1.4
1.9
1.7
2.3
2.1
7.8
7.4
7.8
6.5
6.8
1.1
1.1
1.5
1.7
6.6
7.1
8.0
10.1
2.4
3.6
4.3
4.6
5.7
6.3
6.7
1.3
1.6
1.7
2.1
2.6
2.4
3.3
3.2
4.2
5.5
5.3
1.5
1.8
2.2
2.8
6.6
7.4
6.8
9.4
6.0
5.9
7.3
8.2
7.6
7.4
10.4
2673
2398
2009
1761
1460
1310
1018
912
2522
2584
2522
2761
2522
2752
2177
823
781
695
621
554
1460
1212
1310
1310
3363
3646
3266
2770
2478
2239
2000
4531
4956
4531
4956
4956
3947
4460
1947
1805
1743
1407
7549
7045
7549
7983
7549
7549
6452
5576
5354
4735
4514
3929
4230
3655
3513
3106
2956
2929
2575
Type
55.28
45.90
42.82
35.55
34.69
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
7.57
6.86
6.51
5.79
5.18
4.62
31.19
25.92
21.28
18.79
81.27
72.76
64.26
57.53
46.25
38.76
37.23
33.05
30.43
27.24
23.12
20.70
18.67
16.66
16.25
15.03
14.55
11.71
35.25
30.46
29.29
25.88
24.67
24.41
21.50
105.08
85.10
74.87
60.66
50.98
41.29
35.25
30.46
29.29
25.88
24.67
21.50
1.0
1.1
1.3
1.4
1.9
2.1
2.3
2.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.7
2.6
2.7
2.3
2.4
1.0
1.0
1.0
1.0
1.0
1.2
1.5
1.6
2.0
2.2
2.3
1.0
1.0
1.0
1.0
1.0
1.0
1.2
2.3
2.5
2.8
3.5
1.0
1.0
1.0
1.0
1.0
1.1
1.4
1.4
1.7
1.9
1.7
2.4
2.1
2.1
2.6
2.9
2.7
2.6
3.6
SK 42 - R150 Z - 145 TC
SK 42 - R196 U/Z - 182 TC
SK 32 - R150 U/Z - 145 TC
SK 22 - R150 U/Z - 145 TC
SK 12 - R150 U/Z - 145 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
225 4.8
i
Regel
6.00
240
179
154
135
4.8
4.8
4.8
4.8
6.00
6.00
6.00
6.00
B14 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
3.00
243
303
904
940
1020
1198
1371
379
421
474
517
558
622
701
823
5.00
18
22
40
12.2
13.8
17
20
25
58
68
72
84
28
34
42
47
104
120
125
141
148
170
204
242
254
298
43
49
60
72
89
95
100
114
127
138
152
42
47
51
61
68
75
91
93
104
117
137
151
157
170
200
229
40
51
63
70
79
86
3.0
3.7
6.7
4.6
5.7
7.0
7.9
9.7
11.3
12.0
14.0
2.0
2.3
2.8
3.4
4.2
25
28
34
40
17
20
21
24
42
50
7.2
8.1
10.1
12.0
14.8
16
17
19
21
23
25
7.0
7.8
8.5
10.2
11.3
12.5
15.0
305
273
242
207
189
181
167
142
124
702
561
449
404
359
329
15939
12877
7089
23284
20567
16603
14001
11301
10275
8292
6753
6009
4876
4177
3929
3363
6602
5806
4699
3956
3204
2735
2363
2274
2009
1912
1664
1389
1168
1115
956
6744
6089
5531
4620
4168
3788
3133
2982
2841
2487
2239
2053
1867
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 12 - R150 U/Z - 145 TC
Weight approx.
[Lbs]
(460 V)
I
N
135
[A]
4.8
1283
1292
1159
1159
1027
938
873
783
695
591
538
518
477
406
355
37613
30373
16718
28320
32214
32214
32391
26656
24249
19567
15930
14169
11505
9841
9284
7947
7045
7549
7983
7549
7549
6452
5576
5354
4735
4514
3929
3275
2770
2628
2248
13664
14125
13063
10894
9841
8947
7381
7036
6708
5868
5275
4841
4407
3.4
4.0
4.3
4.9
5.4
5.1
5.9
6.6
7.1
1.8
2.3
2.6
2.9
3.0
3.4
3.0
3.9
6.7
6.7
7.8
8.3
9.7
3.2
3.9
4.2
5.4
1.2
1.6
1.9
2.3
2.9
4.1
5.6
6.2
6.6
3.3
3.2
4.0
4.4
6.9
7.6
1.1
1.3
1.7
1.9
2.5
4.9
4.9
5.0
7.5
6.7
7.8
2.0
2.3
2.5
3.0
3.4
3.7
4.6
1.2
1.4
1.5
1.7
1.9
1.8
2.1
2.3
2.5
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.6
2.8
1.4
1.7
1.8
2.3
2.8
3.3
3.5
4.1
1.0
1.0
1.0
1.0
1.2
1.4
1.4
1.7
1.9
1.7
2.4
2.6
2.8
2.9
3.2
1.0
1.0
1.0
1.0
1.1
2.1
2.1
2.1
3.2
2.8
3.3
1.0
1.0
1.1
1.3
1.4
1.6
2.0
16.73
13.39
10.70
9.65
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
3.98
3.39
2.96
205.61
166.03
91.38
300.34
265.32
214.10
180.57
145.71
132.54
106.95
87.06
77.46
62.87
53.82
50.73
43.43
85.10
74.87
60.66
50.98
41.29
35.25
30.46
29.29
25.88
24.67
21.50
17.92
15.12
14.38
12.28
86.92
78.56
71.39
59.54
53.81
48.90
40.37
38.45
36.69
32.09
28.85
26.46
24.07
SK 73 - R196 Z - 184 TC
SK 63 - R196 U/Z - 184 TC
SK 52 - R196 U/Z - 184 TC
SK 42 - R196 U/Z - 184 TC
620
441
320
256
7.6
7.6
7.6
7.6
i
Regel
6.00
6.00
6.00
6.00
6.00
www.nord.com
B15
VARIABLE SPEED HELICAL GEARED MOTORS
42
50
56
72
81
89
94
21
25
26
30
36
105
118
132
154
173
219
41
42
52
62
29
33
37
38
20
22
23
26
10.6
13.2
16
18
101
107
111
121
73
77
87
90
138
163
2.9
4.6
7.8
3.1
3.8
6.9
8.4
10.4
2.4
2.9
3.5
4.3
4.8
5.9
7.2
8.1
10.0
632
706
792
922
1037
1312
249
300
336
432
483
533
562
127
148
154
183
218
7.50
17
28
47
5.00
64
79
98
111
243
251
312
373
438
463
519
543
120
134
138
158
177
196
220
225
606
642
665
725
826
976
18
23
41
50
63
14.2
18
21
26
29
35
43
49
60
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
2230
1920
1841
1549
1301
1142
947
844
658
587
532
504
449
402
358
308
273
216
1602
1451
1292
1257
1168
1124
912
760
4460
3584
2885
2567
2363
2115
2062
1797
648
612
547
522
468
442
427
391
343
291
24391
15399
9080
23152
18700
10293
8434
6806
29878
24107
20337
16408
14921
12045
9806
8726
7080
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 32 - R196 U/Z - 184 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
207 7.6
1.0
1.2
1.4
1.5
1.6
1.8
1.7
1.0
1.0
1.0
1.0
1.0
1.8
1.5
1.6
1.7
1.8
2.0
1.3
1.4
1.5
1.5
1.6
1.8
2.3
2.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
3.3
3.3
1.6
3.9
3.8
4.5
3.9
4.6
5.1
5.9
1.3
1.7
3.5
1.0
1.1
1.8
2.2
2.9
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.5
1.8
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
7.57
6.86
6.51
5.79
5.18
4.62
3.97
3.53
2.79
20.70
18.67
16.66
16.25
15.03
14.55
11.71
9.80
57.53
46.25
37.23
33.05
30.43
27.24
26.57
23.12
8.36
7.90
7.05
6.74
6.04
5.70
5.50
5.05
4.43
3.75
216.61
136.78
80.62
205.61
166.03
91.38
74.87
60.46
265.32
214.10
180.57
145.71
132.54
106.95
87.06
77.46
62.87
2.2
2.9
3.2
3.5
3.7
4.2
4.0
1.2
1.1
1.5
1.6
1.9
4.2
3.5
3.7
4.0
4.2
4.7
3.8
4.3
5.4
6.6
3.1
3.4
3.6
3.6
1.9
2.3
1.9
2.5
1.1
1.4
1.8
1.3
8.9
10.6
9.3
10.9
7.8
7.8
3.9
9.3
11.9
13.9
3.2
4.2
8.8
2.0
2.7
4.6
5.6
7.3
1.1
1.3
1.6
2.0
2.2
2.7
2.9
3.8
4.6
2752
2177
2673
2522
2522
2522
2230
1991
1549
1381
1257
1195
1062
947
845
727
646
511
3788
3416
3044
2974
2752
2664
2142
1797
4956
4956
5186
3363
4531
4947
3859
4230
1531
1443
1292
1230
1106
1044
1009
920
811
686
61038
38542
22718
47171
46781
25745
21098
17036
32214
32214
32391
32745
32745
30134
24532
21824
17718
SK 22 - R196 U/Z - 184 TC
SK 83 - R210 Z - 213 TC
SK 73 - R210 Z - 213 TC
SK 63 - R210 Z - 213 TC
183
897
662
483
7.6
11
11
11 i
Regel
6.00
6.00
6.00
6.00
6.00
B16 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
7.50
70
74
87
105
122
144
153
176
211
250
263
308
371
445
62
74
92
107
124
129
146
98
103
116
118
131
143
157
174
193
212
270
281
43
48
53
63
70
77
227
233
251
260
323
386
452
478
102
124
139
142
163
183
202
536
561
626
663
687
748
853
1008
1335
54
64
75
80
38
39
42
43
17
21
23
24
27
30
34
89
93
104
111
115
125
142
168
223
44
51
62
74
26
29
35
42
10.4
12.4
15.0
18
21
22
24
22
24
26
29
16
17
19
20
32
35
45
47
7.2
8.0
8.8
10.6
11.7
12.9
11.7
12.4
14.5
17
20
24
1876
1832
1690
1637
1319
1106
938
894
4195
3425
3071
2991
2602
2328
2106
794
759
681
642
620
569
499
422
319
2779
2425
2018
1699
1620
1381
1151
956
6832
5744
4646
3974
3434
3301
2912
6062
5717
4894
4062
3478
2956
9788
8850
8036
6708
6062
5505
4328
4133
3664
3611
3248
2982
2708
2443
2204
2009
1575
1513
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 63 - R210 Z - 213 TC
1.0
1.0
1.1
1.2
1.5
1.8
2.1
2.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
2.5
2.5
2.9
2.6
3.0
3.3
3.8
4.3
1.1
1.5
1.7
1.8
1.9
2.1
2.6
3.2
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.4
1.4
1.1
1.4
2.1
1.8
2.1
2.2
1.0
1.0
1.0
1.0
1.0
1.0
2.6
2.8
4.2
3.8
2.2
2.3
2.7
3.2
3.6
3.8
37.23
30.43
27.24
26.57
23.12
20.70
18.67
16.66
16.25
15.03
14.55
11.71
9.80
8.36
7.90
7.05
6.74
6.04
5.70
5.50
5.05
4.43
3.75
2.96
60.66
50.98
41.29
35.25
30.46
29.29
25.88
24.67
21.50
17.92
15.12
14.38
12.28
10.20
8.50
53.82
50.73
43.43
36.11
30.91
26.28
86.92
78.56
71.39
59.54
53.81
48.90
38.45
36.69
32.56
32.09
28.85
26.46
24.07
21.68
19.60
17.81
14.00
13.45
3.8
4.6
5.4
5.3
2.5
2.5
2.7
3.0
1.2
1.3
1.6
1.3
1.7
2.1
2.3
2.7
6.4
6.1
7.3
6.4
7.5
8.2
9.6
10.8
4.7
5.2
6.5
8.0
2.8
3.9
4.3
4.5
1.2
1.3
1.7
2.2
2.2
2.7
3.1
6.4
7.0
10.5
9.5
5.2
4.6
5.4
5.6
3.4
3.4
2.9
3.4
1.4
1.6
1.7
2.0
2.3
2.6
5.4
5.7
6.7
8.0
9.1
9.6
4691
4531
4239
4098
3301
2761
2354
2230
5186
4531
4947
3859
4522
4947
4947
1982
1903
1699
1602
1549
1425
1248
1053
797
6947
6062
5053
4257
4053
3460
2876
2398
7983
7549
7983
8939
7549
8257
7292
15169
14293
12240
10178
8708
7407
13664
14125
14054
13682
14125
13779
10832
10337
9177
9045
8133
7452
6779
6107
5522
5018
3947
3788
SK 52 - R210 U/Z - 213 TC
SK 42 - R210 U/Z - 213 TC
SK 32 - R210 U/Z - 213 TC
Weight approx.
[Lbs]
(460 V)
I
N
483
[A]
11 i
Regel
6.00
362
298
249
11
11
11
6.00
6.00
6.00
www.nord.com
B17
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
2.9
4.6
7.8
3.1
3.8
6.9
8.4
10.4
8.1
10.0
11.7
12.4
14.5
17
20
24
3.5
4.3
4.8
5.8
5.9
7.2
19
20
22
24
26
29
32
8.0
8.8
10.6
11.7
12.9
16
17
35
45
47
42
44
51
62
74
24
26
29
35
15.0
18
21
22
23
27
30
34
38
39
42
43
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
32524
20541
12107
30869
24930
13718
11240
9080
27116
21877
19904
16196
16054
13071
11629
9443
8080
7620
6522
5425
4637
3947
11797
10717
8939
8080
7346
5770
5505
4885
4814
4328
3974
3611
3257
2947
2673
2106
2018
6204
5292
4575
4398
3885
3708
3230
2690
2274
2159
1841
1531
1274
4089
3469
3106
2805
2505
2443
2257
2186
10.0
17
28
47
87
105
122
144
49
60
70
74
21
26
29
35
35
43
18
23
41
50
63
116
118
131
143
157
174
193
48
53
63
70
77
98
103
212
270
281
250
263
308
371
445
92
107
124
129
146
153
176
211
139
163
183
202
227
233
251
260
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Service factor Red. ratio
High f
B1
Low f
B2 i ges
2.4
3.2
6.6
5.0
6.0
6.9
7.2
2.8
3.4
4.1
4.3
1.2
1.5
1.6
2.0
2.0
2.2
1.5
2.0
3.4
4.2
5.5
2.1
2.6
3.9
3.4
4.0
4.2
4.8
1.2
1.3
1.5
1.7
1.9
2.6
2.6
5.3
7.8
7.2
3.4
3.6
3.9
4.9
6.0
2.3
2.1
2.9
3.2
1.3
1.7
1.6
2.0
1.2
1.3
1.6
1.8
1.9
1.9
2.0
2.2
61038
38542
22718
47171
46781
25745
21098
17036
32391
32745
32745
30400
30134
24532
21824
17718
15169
14293
12240
10178
8708
7407
14125
14054
13682
14125
13779
10832
10337
9177
9045
8133
7452
6779
6107
5522
5018
3947
3788
7983
8939
7549
8257
7292
6947
6062
5053
4257
4053
3460
2876
2398
4947
4522
4947
4947
4691
4531
4239
4098
Type
216.61
136.78
80.62
205.61
166.03
91.38
74.87
60.46
180.57
145.71
132.54
107.89
106.95
87.06
77.46
62.87
53.82
50.73
43.43
36.11
30.91
26.28
78.56
71.39
59.54
53.81
48.90
38.45
36.69
32.56
32.09
28.85
26.46
24.07
21.68
19.60
17.81
14.00
13.45
41.29
35.25
30.46
29.29
25.88
24.67
21.50
17.92
15.12
14.38
12.28
10.20
8.50
27.24
23.12
20.70
18.67
16.66
16.25
15.03
14.55
1.3
1.7
3.5
1.5
1.8
2.2
2.3
2.7
3.2
3.6
3.8
1.0
1.0
1.0
1.1
1.1
1.2
1.0
1.1
1.8
2.2
2.9
1.1
1.4
2.1
1.8
2.1
2.2
2.6
1.0
1.0
1.0
1.0
1.0
1.4
1.4
2.8
4.2
3.8
1.8
1.9
2.1
2.6
3.2
1.0
1.0
1.0
1.1
1.2
1.1
1.5
1.7
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
SK 83 - R210 Z - 215 TC
SK 73 - R210 Z - 215 TC
SK 63 - R210 Z - 215 TC
SK 52 - R210 U/Z - 215 TC
SK 42 - R210 U/Z - 215 TC
SK 32 - R210 U/Z - 215 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
911 14 i
Regel
6.00
675
496
375
311
262
14
14
14
14
14
6.00
6.00
6.00
6.00
6.00
B18 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
23
30
38
41
50
63
72
83
100
17
23
28
36
47
54
61
10.0
323
386
452
478
536
561
626
663
687
748
853
1008
1335
15.0
20
31
35
40
105
122
144
172
60
70
74
87
182
218
29
35
35
43
49
39
47
59
68
21
28
29
35
78
94
3.4
5.1
5.8
6.7
2.9
3.8
4.6
6.1
7.8
9.0
10.2
3.8
5.1
6.3
6.9
8.4
10.4
12.1
13.8
17
104
111
115
125
142
168
223
54
64
75
80
89
93
17
20
24
29
10.0
11.7
12.4
14.5
30
36
4.8
5.8
5.9
7.2
8.1
3.6
4.7
4.8
5.9
6.5
7.9
9.8
11.3
13.0
16
42321
27709
24576
21019
48781
37090
30807
23426
18160
15824
13939
37391
28055
22629
20585
16859
13620
11762
10284
8478
1761
1469
1257
1186
1062
1009
903
856
826
758
666
563
425
29851
24302
24090
19612
17443
14160
12125
11425
9779
8133
6965
5921
4947
4682
3912
39807
29869
29833
24090
21913
17948
14496
12523
10947
9018
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 32 - R210 U/Z - 215 TC
Weight approx.
[Lbs]
(460 V)
I
N
262
[A]
14
75632
49533
43931
37577
78677
66295
55056
41861
32453
28276
24913
49826
49737
34400
36781
30134
24338
21028
18381
15151
3301
2761
2354
2230
1982
1903
1699
1602
1549
1425
1248
1053
797
32745
32303
32745
27833
31179
25311
21665
20417
17479
14532
12443
10576
8850
8363
6992
49826
49737
42595
34400
47171
47171
38860
33577
29347
24187
1.6
2.1
2.1
3.5
4.4
5.0
5.7
2.9
4.5
4.2
5.9
1.3
1.8
1.6
2.3
2.8
3.7
4.2
4.6
5.2
4.6
5.4
4.8
5.6
6.2
7.2
8.1
2.8
3.4
4.0
4.0
2.0
4.8
4.0
4.6
4.8
5.7
2.3
2.7
2.9
3.3
6.0
7.2
1.1
1.3
1.4
1.4
1.9
2.2
2.6
3.4
3.9
1.3
1.7
1.5
1.5
4.3
4.9
1.6
2.5
2.3
3.3
1.0
1.2
1.2
1.9
2.4
2.8
3.2
1.0
1.0
1.0
1.3
1.6
2.1
2.3
2.6
2.9
2.5
2.9
2.6
3.0
3.3
3.8
4.3
1.5
1.8
2.1
2.1
1.1
2.5
1.3
1.5
1.6
1.9
2.2
2.6
2.7
3.2
3.4
4.1
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.3
1.5
1.6
1.8
187.89
123.05
109.14
93.34
216.61
164.70
136.78
104.00
80.62
70.24
61.89
166.03
124.57
100.46
91.38
74.87
60.46
52.24
45.66
37.63
11.71
9.80
8.36
7.90
7.05
6.74
6.04
5.70
5.50
5.05
4.43
3.75
2.96
132.54
107.89
106.95
87.06
77.46
62.87
53.82
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
166.03
124.57
124.41
100.46
91.38
74.87
60.46
52.24
45.66
37.63
SK 93 - R250 Z - 254 TC
SK 83 - R250 Z - 254 TC
SK 73 - R250 U - 254 TC
SK 73 - R280 U/Z - 254 TC
SK 63 - R250 U - 254 TC
1508
1114
878
895
673
21
21
21
21
21 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
B19
VARIABLE SPEED HELICAL GEARED MOTORS
74
87
95
102
42
44
51
62
18
21
22
24
26
29
35
110
118
124
138
131
162
180
196
209
2.9
4.3
32
35
45
47
22
24
26
29
11.7
12.9
16
17
19
20
52
60
71
19
23
27
28
34
5.5
6.8
7.6
9.4
11.0
11.7
13.6
16
3.1
4.7
250
263
308
371
445
519
568
611
107
124
129
146
153
176
211
657
706
741
825
789
972
1080
1177
1251
20.0
17
26
19
28
15.0
33
41
46
56
115
135
162
171
66
70
82
98
204
131
143
157
174
193
212
270
281
70
77
98
103
116
118
310
357
428
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
3407
3239
2770
2301
1912
1637
1496
1398
7938
6859
6593
5832
5558
4841
4036
1292
1204
1151
1035
1080
876
789
723
681
66322
43639
12116
11009
8664
8266
7337
7230
6496
5956
5425
4885
4416
4009
3151
3027
2744
2381
1991
25869
20877
18576
15072
12903
12160
10416
8655
7407
6301
5266
4983
4168
61047
40161
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 63 - R280 U/Z - 254 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
690 21
6089
5788
4947
4106
3425
2929
2673
2496
8939
7549
9000
8939
7877
8655
7213
2319
2151
2053
1841
1929
1566
1407
1292
1212
133361
87748
14125
14054
14762
14054
10443
12328
11611
10655
9691
8726
7894
7169
5637
5416
4912
4257
3558
32303
27833
32745
32480
32745
32612
27913
23214
19868
16895
14125
13355
11169
166380
109475
4.0
4.5
4.3
5.1
2.3
2.4
2.6
3.3
1.1
1.1
1.4
1.5
1.4
1.9
2.1
6.0
7.1
7.3
7.6
4.9
5.2
5.7
6.2
7.8
3.1
4.7
3.2
3.5
5.2
4.8
2.6
2.3
2.7
2.8
1.2
1.3
1.7
1.7
1.4
1.7
5.5
6.3
7.2
4.3
4.5
5.4
5.7
6.8
2.5
2.7
3.1
3.8
1.2
1.4
1.8
2.2
3.4
5.1
1.3
1.3
1.5
1.8
2.2
2.5
2.4
2.8
1.0
1.0
1.0
1.0
1.0
1.1
1.2
2.7
2.9
3.2
3.5
3.3
4.0
4.1
4.2
4.4
1.5
2.3
1.5
1.3
1.5
1.6
1.8
2.0
2.9
2.7
1.0
1.0
1.0
1.0
1.0
1.0
3.1
3.6
4.0
1.6
1.7
2.0
2.1
2.5
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.2
1.9
35.25
30.46
29.29
25.88
24.67
21.50
17.92
15.12
14.38
12.28
10.20
8.50
7.28
6.65
6.19
5.75
5.35
5.10
4.58
4.79
3.89
3.50
3.21
3.02
207.47
136.51
53.81
48.90
38.45
36.69
32.56
32.09
28.85
26.46
24.07
21.68
19.60
17.81
14.00
13.45
12.20
10.58
8.83
107.89
87.06
77.46
62.87
53.82
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
207.47
136.51
SK 52 - R250 U/Z - 254 TC
SK 42 - R250 U/Z - 254 TC
SK 103 - R280 Z - 256 TC
551
487
2026
SK 103 - R300 U/Z - 256 TC 2086
21
21
27
27 i
Regel
6.00
6.00
6.00
6.00
6.00
B20 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
20.0
19
29
33
38
49
21
31
35
41
225
255
306
88
92
97
111
123
98
115
135
162
171
204
46
56
66
70
82
68
78
94
107
125
152
28
35
39
47
59
18
23
28
37
48
55
62
75
87
16
22
26
34
44
51
57
69
80
91
37
43
51
14.7
15.0
16
18
21
16
19
23
27
28
34
7.6
9.4
11.0
11.7
13.6
11.3
13.0
16
18
21
25
4.7
5.9
6.5
7.9
9.8
3.0
3.9
4.7
6.2
8.0
9.2
10.4
12.5
14.5
2.7
3.6
4.3
5.7
7.3
8.4
9.6
11.5
13.3
15.0
3.1
4.8
5.4
6.3
8.2
3.4
5.2
5.9
6.9
5053
4452
3708
12903
12293
11726
10257
9222
24762
20098
17204
16222
13886
11540
9885
8399
7027
6638
5549
39825
32117
29214
23939
19328
16700
14594
12027
10629
9054
7461
63729
48463
40241
30603
23718
20665
18213
15160
13054
69251
52649
43728
33249
25771
22452
19789
16470
14187
12496
60065
39338
34887
29842
23169
55286
36205
32108
27462
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 93 - R280 Z - 256 TC
2.6
3.0
3.7
1.0
1.0
1.0
1.0
1.0
1.4
1.6
1.7
2.0
2.1
2.5
1.0
1.0
1.0
1.0
1.2
1.5
1.6
1.8
2.1
2.4
2.9
1.0
1.0
1.0
1.0
1.3
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.9
2.2
1.0
1.0
1.0
1.2
1.5
1.8
2.0
2.4
2.8
3.2
1.0
1.6
1.5
2.1
2.5
1.0
1.3
1.2
1.7
15.80
13.92
11.59
40.37
38.45
36.69
32.09
28.85
77.46
62.87
53.82
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
124.57
100.46
91.38
74.87
60.46
52.24
45.66
37.63
33.24
28.32
23.34
216.61
164.70
136.78
104.00
80.62
70.24
61.89
51.51
44.38
216.61
164.70
136.78
104.00
80.62
70.24
61.89
51.51
44.38
39.08
187.89
123.05
109.14
93.34
72.47
187.89
123.05
109.14
93.34
5.3
6.1
7.3
1.1
1.2
1.2
1.2
1.8
2.8
3.2
3.4
4.0
4.3
5.1
1.3
1.6
1.9
2.0
2.3
2.9
3.3
3.7
4.2
4.9
5.9
1.2
1.1
1.6
2.0
2.6
1.2
1.6
1.6
2.7
3.4
3.8
4.4
5.2
6.0
1.1
1.5
1.5
2.4
3.1
3.5
4.0
4.8
5.5
6.4
2.1
3.1
2.9
4.2
5.1
2.2
3.4
3.2
4.5
10160
8947
7452
14496
14762
14054
12328
16868
32745
32480
32745
32612
27913
23214
19868
16895
14125
13355
11169
49737
34400
47171
47171
38860
33577
29347
24187
21364
18204
15001
78677
79031
65313
81243
64658
56330
49631
41312
35595
78677
79031
65313
66853
51826
45153
39781
33108
28524
25125
120776
79101
70154
60003
46586
123723
98678
87527
74853
SK 93 - R300 U/Z - 256 TC 1603
SK 83 - R280 Z - 256 TC
SK 83 - R300 U/Z - 256 TC 1208
SK 73 - R280 U/Z - 256 TC
SK 63 - R280 U/Z - 256 TC
SK 62 - R280 U/Z - 256 TC
SK 52 - R280 U/Z - 256 TC
Weight approx.
[Lbs]
(460 V)
I
N
1544
[A]
27 i
Regel
6.00
1149
913
708
739
587
27
27
27
27
27
27
27
6.00
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
B21
VARIABLE SPEED HELICAL GEARED MOTORS
3.1
4.7
7.9
3.4
5.2
5.9
6.9
8.9
10.4
11.9
92
102
106
128
56
67
77
81
33
42
44
48
22
25
27
30
145
161
174
17
19
23
28
31
36
5.2
7.0
8.6
10.6
12.3
14.1
8.3
10.2
11.9
12.7
14.8
18
3.9
4.7
6.2
8.0
9.2
10.4
12.5
14.5
16
20
23
26
103
116
136
165
187
214
31
42
52
64
74
84
50
61
72
76
89
107
87
99
119
138
158
23
28
37
48
55
62
75
21
31
35
41
53
63
72
20.0
134
147
164
181
553
613
634
770
870
967
1044
199
254
264
291
336
402
461
488
25.0
19
28
47
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
76305
50206
29940
69101
45259
40144
34329
26656
22665
19789
3381
2823
2460
2328
2053
1850
1788
1478
8461
7691
6930
6266
5691
4478
4301
3903
1301
1177
1089
45816
33612
27532
22240
19213
16797
13841
12222
10416
8585
7584
6620
60578
50303
38250
29648
25833
22762
18948
16319
14372
11956
10310
8983
28488
23125
19797
18656
15974
13284
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 52 - R280 U/Z - 256 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
587 27
166380
109475
65278
123723
98678
87527
74853
58118
49427
43144
6797
5673
4947
4673
4124
3726
3602
2965
13682
14549
13673
12602
11452
9000
8646
7841
2620
2363
2186
49737
47171
47171
48489
41896
36621
30179
26656
22709
18718
16541
14434
79031
65313
81243
64658
56330
49631
41312
35595
31338
26081
22479
19585
32745
32480
32745
32745
32568
28957
2.7
4.1
6.1
1.8
2.7
2.5
3.6
4.4
5.0
5.5
6.3
6.2
6.3
6.9
4.5
5.1
5.6
5.8
2.5
3.7
3.4
3.8
1.6
1.9
2.0
2.3
7.4
7.7
8.0
3.2
3.6
4.2
5.2
5.8
6.7
1.1
1.4
1.7
2.2
2.6
2.8
1.1
1.4
1.7
1.8
2.0
2.5
4.8
5.5
6.3
7.0
7.9
1.3
1.3
2.1
2.7
3.1
3.5
4.2
1.2
1.9
2.8
1.0
1.3
1.2
1.7
2.0
2.3
2.5
2.2
2.5
2.8
2.9
3.1
3.1
3.1
3.5
1.0
1.0
1.0
1.1
1.2
1.8
1.7
1.9
3.7
3.8
4.0
1.5
1.7
1.9
2.4
2.7
3.1
1.0
1.0
1.0
1.0
1.2
1.3
1.0
1.0
1.0
1.0
1.0
1.1
2.2
2.5
2.9
3.2
3.6
1.0
1.0
1.0
1.2
1.4
1.6
1.9
207.47
136.51
81.40
187.89
123.05
109.14
93.34
72.47
61.63
53.80
10.58
8.83
7.70
7.27
6.42
5.79
5.60
4.61
26.46
24.07
21.68
19.60
17.81
14.00
13.45
12.20
4.08
3.67
3.40
124.57
91.38
74.87
60.46
52.24
45.66
37.63
33.24
28.32
23.34
20.62
18.00
164.70
136.78
104.00
80.62
70.24
61.89
51.51
44.38
39.08
32.52
28.03
24.42
77.46
62.87
53.82
50.73
43.43
36.11
SK 103 - R300 Z - 284 TC
SK 93 - R300 Z - 284 TC
SK 83 - R300 U/Z - 284 TC
SK 73 - R300 U/Z - 284 TC
SK 63 - R300 U/Z - 284 TC
2137
1654
1259
1023
816
34
34
34
34
34 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
B22 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
25.0
125
147
175
186
222
244
277
333
366
99
119
138
158
55
62
75
87
23
28
37
48
21
31
35
41
53
63
72
42
52
64
74
84
103
116
136
165
187
214
276
287
316
365
437
501
531
601
134
146
160
178
197
217
689
837
945
30.0
19
28
47
3.1
4.7
7.9
3.4
5.2
5.9
6.9
8.9
10.4
11.9
73
83
88
100
46
48
53
61
22
24
27
30
33
36
115
139
158
23
28
31
36
7.0
8.6
10.6
12.3
14.1
17
19
16
20
23
26
3.9
4.7
6.2
8.0
9.2
10.4
12.5
14.5
21
24
29
31
37
41
46
55
61
91562
60251
35922
82925
54304
48171
41197
31984
27196
23745
10611
9735
8850
7974
7213
6549
5151
4947
4487
3894
3248
2832
2673
2363
2062
1699
1505
40329
33046
26683
23054
20151
16611
14673
12496
10301
9098
7947
72685
60366
45896
35577
31002
27311
22736
19585
17249
14355
12372
10779
11372
9664
8080
7638
6390
5814
5115
4266
3876
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 63 - R300 U/Z - 284 TC
Weight approx.
[Lbs]
(460 V)
I
N
816
[A]
34
166380
109475
65278
123723
98678
87527
74853
58118
49427
43144
16868
13682
14549
13673
14125
14054
11231
10788
9788
8487
7080
6177
5832
5151
4487
3699
3275
47171
47171
48489
41896
36621
30179
26656
22709
18718
16541
14434
79031
65313
81243
64658
56330
49631
41312
35595
31338
26081
22479
19585
24789
21072
17629
16656
13930
12673
11160
9293
8461
2.2
3.4
5.1
1.5
2.3
2.1
3.0
3.7
4.1
4.6
4.4
4.8
5.0
5.4
3.2
2.9
3.3
3.9
1.6
1.4
1.6
1.7
2.0
2.1
5.5
6.0
6.4
3.5
4.3
4.9
5.6
1.2
1.4
1.9
2.1
2.4
2.7
3.0
2.6
2.9
3.5
4.0
1.1
1.1
1.8
2.2
4.6
5.3
5.8
6.6
2.8
2.9
3.5
3.7
4.4
4.6
5.3
6.4
7.1
1.2
1.9
2.8
1.0
1.3
1.2
1.7
2.0
2.3
2.5
1.5
1.3
1.5
1.8
2.0
2.2
2.3
2.5
1.0
1.0
1.0
1.0
1.0
1.0
2.5
2.8
3.0
1.0
1.0
1.0
1.2
1.3
1.5
1.7
1.9
2.4
2.7
3.1
1.0
1.0
1.0
1.2
1.4
1.6
1.9
2.2
2.5
2.9
3.2
3.6
1.3
1.3
1.6
1.7
2.0
2.1
2.4
2.9
3.2
207.47
136.51
81.40
187.89
123.05
109.14
93.34
72.47
61.63
53.80
28.85
26.46
24.07
21.68
19.60
17.81
14.00
13.45
12.20
10.58
8.83
7.70
7.27
6.42
5.60
4.61
4.08
91.38
74.87
60.46
52.24
45.66
37.63
33.24
28.32
23.34
20.62
18.00
164.70
136.78
104.00
80.62
70.24
61.89
51.51
44.38
39.08
32.52
28.03
24.42
30.91
26.28
21.98
20.77
17.37
15.80
13.92
11.59
10.55
SK 62 - R300 U/Z - 284 TC
SK 52 - R300 U/Z - 284 TC
SK 103 - R300 Z - 286 TC
SK 93 - R300 Z - 286 TC
SK 83 - R300 U/Z - 286 TC
SK 73 - R300 U/Z - 286 TC
849
695
2159
1676
1281
1045
34
34
40
40
40
40 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
B23
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
88
100
115
139
53
61
73
83
158
33
36
46
48
22
24
27
30
3.1
4.7
7.9
9.2
10.6
41
46
55
61
18
21
24
29
10.2
11.9
12.7
14.8
31
37
17
20
23
26
31
6.2
8.0
9.2
10.4
12.5
14.5
3.4
5.2
5.9
6.9
8.9
10.5
12.0
21
39
45
30.0
61
72
76
89
107
125
147
175
186
222
244
277
333
366
99
119
138
159
184
37
48
55
63
75
87
21
31
35
41
53
63
72
124
234
271
40.0
19
28
48
55
64
316
365
437
501
531
601
689
837
945
134
146
160
178
197
217
276
287
Output speed
High n
21
[rpm]
Low n
22
[rpm]
5381
4673
3894
3398
3213
2832
2469
2036
1797
12735
11682
10620
9567
8646
7859
6177
5938
121652
80048
47728
41268
35595
27745
23753
22391
19169
15939
13638
11602
9700
9169
7664
6974
6142
5115
4655
110174
72154
63994
54728
42498
36135
31550
18328
60985
47277
41188
36294
30205
26019
22913
19072
16434
14319
12337
9708
8381
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 63 - R300 U/Z - 286 TC
Weight approx.
[Lbs]
(460 V)
I
N
[A]
838 40
9788
8487
7080
6177
5832
5151
4487
3699
3275
16868
13682
14549
13673
14125
14054
11231
10788
204966
196718
117298
101421
87482
32480
32745
32745
32568
28957
24789
21072
17629
16656
13930
12673
11160
9293
8461
123723
123458
102306
123900
104430
88810
77526
45029
81243
79473
79296
79650
74225
63950
56313
46861
40391
35188
30320
23860
20594
4.2
4.5
4.6
5.0
2.8
3.2
3.7
4.0
5.4
1.6
1.8
2.7
2.4
1.3
1.2
1.4
1.4
1.7
2.5
3.8
4.3
5.0
3.8
4.4
5.3
5.9
2.0
2.3
2.4
2.9
1.2
1.4
1.5
1.7
3.1
3.7
3.5
4.0
4.4
4.9
5.7
1.3
1.7
1.9
2.2
2.6
3.0
1.1
1.7
1.6
2.3
2.8
3.1
3.4
5.9
6.0
6.9
1.5
1.8
2.0
2.2
2.3
2.5
2.5
2.8
3.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.3
1.0
1.0
1.5
1.7
2.0
1.0
1.0
1.0
1.0
1.1
1.3
1.3
1.6
1.7
2.0
2.1
2.4
2.9
3.2
1.4
1.6
1.8
2.0
2.3
1.0
1.0
1.0
1.0
1.1
1.2
1.0
1.0
1.0
1.0
1.1
1.3
1.4
2.4
2.4
2.8
12.20
10.58
8.83
7.70
7.27
6.42
5.60
4.61
4.08
28.85
26.46
24.07
21.68
19.60
17.81
14.00
13.45
207.47
136.51
81.40
70.38
60.71
62.87
53.82
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
15.80
13.92
11.59
10.55
187.89
123.05
109.14
93.34
72.47
61.63
53.80
31.25
104.00
80.62
70.24
61.89
51.51
44.38
39.08
32.52
28.03
24.42
21.04
16.56
14.29
SK 62 - R300 U/Z - 286 TC
SK 52 - R300 U/Z - 286 TC
SK 103 - R350 Z - 200L/4
SK 93 - R350 Z - 200L/4
SK 83 - R350 U/Z - 200L/4
SK 82 - R350 U/Z - 200L/4
871
717
2220
1738
1343
1325
40
40
45
45
45
45 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
6.00
B24 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
38
45
52
60
68
25
29
31
37
12.7
14.9
18
21
89
100
115
140
53
61
73
84
158
30
33
36
46
48
41
46
56
61
73
85
102
122
141
3.0
4.5
5.5
7.6
8.8
10.2
11.7
13.7
21
24
23
28
31
36
8.6
10.7
12.3
14.1
17
19
5.0
8.5
40.0
52
64
74
85
103
116
137
166
188
215
50.0
14.9
23
58
68
105
122
28
38
44
51
317
366
438
503
532
603
691
840
949
179
197
217
276
288
245
278
334
367
441
512
610
732
849
76
89
107
125
147
176
186
223
230
270
309
357
409
25
43
Output speed
High n
21
[rpm]
Low n
22
[rpm]
9885
8399
7346
6354
5549
29745
25470
21178
18125
15408
12886
12178
10186
12709
11496
10443
8213
7885
7151
6204
5177
4514
4266
3761
3283
2699
2390
9266
8160
6797
6186
5151
4434
3726
3098
2673
190151
125112
103138
74606
64508
55640
48560
41471
27143
23187
43905
35453
30630
26771
22063
19488
16603
13682
12089
10558
112776
66419
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 73 - R350 U/Z - 200L/4
Weight approx.
[Lbs]
(460 V)
I
N
1107
[A]
45 i
Regel
6.00
24293
20647
18045
15620
13629
32745
32568
32657
31772
28320
28320
28320
25028
13673
14125
14054
16470
14434
15001
15116
12726
11098
10478
9248
8071
6646
5876
22771
20063
16700
15204
12656
10894
9151
7620
6576
204966
203550
204966
177788
153716
132600
115714
98828
64694
55259
47171
50003
49206
47525
44250
44250
40807
33630
29718
25939
123458
118590
1.8
2.2
2.3
2.8
1.1
1.3
1.5
1.8
3.6
4.3
4.9
6.5
7.5
3.1
3.4
3.4
3.8
2.1
2.4
2.8
3.0
4.0
1.1
1.2
1.3
2.0
1.8
2.9
3.3
4.0
4.4
5.2
6.2
4.6
5.4
6.9
1.1
1.6
2.0
2.4
2.7
3.2
3.6
4.3
6.5
7.6
1.1
1.4
1.6
1.8
2.0
2.3
2.7
3.2
3.7
4.2
1.1
1.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.5
1.7
2.0
2.6
3.1
1.0
1.0
1.1
1.2
1.3
1.4
1.4
1.5
1.6
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.8
2.1
2.5
1.9
2.2
2.8
1.0
1.0
1.0
1.0
1.2
1.3
1.5
1.8
2.7
3.2
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.7
1.0
1.0
16.86
14.33
12.52
10.84
9.46
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
21.68
19.60
17.81
14.00
13.45
12.20
10.58
8.83
7.70
7.27
6.42
5.60
4.61
4.08
15.80
13.92
11.59
10.55
8.78
7.56
6.35
5.29
4.56
207.47
136.51
112.53
81.40
70.38
60.71
52.98
45.25
29.62
25.30
74.87
60.46
52.24
45.66
37.63
33.24
28.32
23.34
20.62
18.00
123.05
72.47
SK 72 - R350 U/Z - 200L/4
SK 63 - R350 U/Z - 200L/4
SK 62 - R350 U/Z - 200L/4
SK 52 - R350 U/Z - 200L/4
SK 93 - R375 U/Z - 225S/4
1085
900
933
778
SK 103 - R375 U/Z - 225S/4 2604
2121
45
45
45
45
62
62
6.00
6.00
6.00
6.00
5.00
5.00
www.nord.com
B25
VARIABLE SPEED HELICAL GEARED MOTORS
96
111
128
150
37
43
49
57
65
76
89
13.6
16
19
22
27
30
34
92
98
113
117
136
153
158
166
188
34
39
44
53
59
71
82
10.0
11.5
13.3
16
20
23
27
38
43
50
37
43
52
60
7.7
8.8
10.0
12.0
14.0
16
19
22
25
29
50.0
50
58
66
78
99
114
135
184
216
247
286
327
378
445
482
553
638
751
68
82
93
109
133
150
172
460
488
565
585
679
764
792
832
938
171
196
222
267
293
353
409
188
216
250
70
79
95
110
38
44
50
60
127
147
187
217
261
300
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
41852
34488
30462
25957
21390
18895
16496
15452
13133
11478
9939
8673
7505
6372
5885
5133
4443
3779
16629
14479
12762
10620
9673
8045
6930
6168
5823
5027
4850
4177
3708
3584
3407
3027
56481
49312
42684
36241
28639
24789
21054
15098
13160
11355
73889
64375
56720
47206
40675
35816
29807
25692
22382
19284
15178
13098
10850
9470
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 93 - R375 U/Z - 225S/4
Weight approx.
[Lbs]
(460 V)
I
N
[A]
2121 62
47525
44250
44250
44250
44250
44250
39312
35869
31302
27347
23674
20665
17886
15178
14018
12231
10593
9000
27231
26585
27258
25311
23045
19178
16514
14700
13868
11965
11558
9956
8850
8540
8124
7204
112395
108413
101713
86358
68251
59083
50171
35975
31364
27063
79473
79296
79650
79031
78677
79650
71030
61224
53339
45958
36170
31214
25860
22559
2.3
2.7
3.1
4.2
4.8
5.5
6.0
4.2
4.9
5.8
6.3
1.1
1.3
1.5
1.7
2.1
2.3
2.7
4.4
4.5
5.0
5.3
4.1
2.9
4.3
3.4
5.8
1.6
1.8
2.1
2.6
2.8
3.3
4.0
2.0
2.2
2.5
3.0
3.8
4.4
5.1
6.2
7.2
8.3
3.8
4.4
5.8
6.4
1.9
2.2
2.5
2.8
1.1
1.2
1.4
1.7
3.2
3.7
1.0
1.1
1.3
1.7
2.0
2.3
2.5
1.7
2.0
2.4
2.6
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.7
1.2
1.8
1.4
1.8
1.9
2.1
2.2
2.4
1.0
1.0
1.0
1.1
1.2
1.4
1.7
1.0
1.0
1.1
1.3
1.6
1.8
2.2
2.6
3.0
3.5
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.5
1.6
1.9
2.4
2.7
45.66
37.63
33.24
28.32
23.34
20.62
18.00
16.86
14.33
12.52
10.84
9.46
8.19
6.95
6.42
5.60
4.85
4.12
18.14
15.80
13.92
11.59
10.55
8.78
7.56
6.73
6.35
5.48
5.29
4.56
4.05
3.91
3.72
3.30
61.63
53.80
46.57
39.54
31.25
27.05
22.97
16.47
14.36
12.39
80.62
70.24
61.89
51.51
44.38
39.08
32.52
28.03
24.42
21.04
16.56
14.29
11.84
10.33
SK 92 - R375 U/Z - 225S/4
SK 83 - R375 U/Z - 225S/4
SK 82 - R375 U/Z - 225S/4
SK 73 - R375 U/Z - 225S/4
SK 72 - R375 U/Z - 225S/4
SK 62 - R375 U/Z - 225S/4
2097
1727
1709
1491
1469
1316
62
62
62
62
62
62 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
5.00
B26 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
37
43
52
60
10.0
12.0
14.0
16
19
22
25
29
8.5
10.0
11.5
13.3
16
20
23
27
38
43
50
4.5
5.5
7.6
8.8
10.2
11.7
13.7
21
24
76
89
96
111
128
150
37
43
49
57
65
16
19
22
27
30
34
34
39
44
53
59
71
82
92
60.0
23
28
38
44
51
58
68
105
122
378
445
482
553
638
751
184
216
247
286
327
82
93
109
133
150
172
171
196
222
267
293
353
409
460
50
60
70
79
95
110
127
147
187
217
261
300
43
50
58
66
78
99
114
135
188
216
250
Output speed
High n
21
[rpm]
Low n
22
[rpm]
150131
123758
89527
77402
66773
58268
49764
32577
27824
68065
56649
48808
42984
35763
30825
26860
23143
18213
15718
13018
11363
79703
67782
59171
51215
43489
34373
29754
25267
18116
15797
13629
41383
36559
31143
25674
22683
19797
18541
15762
13771
11921
10408
9009
7646
7062
6160
5337
4531
19948
17381
15311
12744
11602
9655
8319
7399
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
Weight approx.
[Lbs]
(460 V)
I
N
SK 103 - R375 U/Z - 225M/4 2677
[A]
71 203550
204966
177788
153716
132600
115714
98828
64694
55259
79650
79031
78677
79650
71030
61224
53339
45958
36170
31214
25860
22559
118590
112395
108413
101713
86358
68251
59083
50171
35975
31364
27063
44250
44250
44250
44250
44250
39312
35869
31302
27347
23674
20665
17886
15178
14018
12231
10593
9000
27231
26585
27258
25311
23045
19178
16514
14700
3.2
3.7
4.9
5.3
1.2
1.4
1.6
1.9
2.1
2.3
2.6
3.1
1.5
1.7
1.8
2.1
2.5
3.1
3.6
4.3
5.2
6.0
6.9
1.4
1.7
2.0
2.3
2.7
3.0
3.6
5.4
6.4
4.6
5.0
3.5
4.1
4.8
5.2
1.9
2.3
2.6
3.5
4.0
1.1
1.2
1.4
1.7
2.0
2.2
1.4
1.5
1.8
2.1
2.4
2.8
3.3
3.4
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.5
1.6
1.9
2.4
2.7
1.0
1.0
1.0
1.1
1.3
1.6
1.8
2.2
2.6
3.0
3.5
1.0
1.0
1.0
1.2
1.3
1.5
1.8
2.7
3.2
2.3
2.5
1.7
2.0
2.4
2.6
1.0
1.1
1.3
1.7
2.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.1
1.2
1.4
1.7
1.7
61.89
51.51
44.38
39.08
32.52
28.03
24.42
21.04
16.56
14.29
11.84
10.33
72.47
61.63
53.80
46.57
39.54
31.25
27.05
22.97
16.47
14.36
12.39
136.51
112.53
81.40
70.38
60.71
52.98
45.25
29.62
25.30
37.63
33.24
28.32
23.34
20.62
18.00
16.86
14.33
12.52
10.84
9.46
8.19
6.95
6.42
5.60
4.85
4.12
18.14
15.80
13.92
11.59
10.55
8.78
7.56
6.73
SK 93 - R375 U/Z - 225M/4
SK 92 - R375 U/Z - 225M/4
SK 83 - R375 U/Z - 225M/4
SK 82 - R375 U/Z - 225M/4
SK 73 - R375 U/Z - 225M/4
SK 72 - R375 U/Z - 225M/4
SK 62 - R375 U/Z - 225M/4
2194
2170
1799
1782
1563
1541
1389
71
71
71
71
71
71
71 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
www.nord.com
B27
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
22
26
30
34
37
43
52
60
70
110
128
150
160
65
76
89
96
37
43
49
57
38
43
50
12.0
13.9
16
19
22
25
29
8.8
10.2
11.7
13.7
21
24
4.5
5.5
7.6
16
32
37
8.5
10.0
11.5
13.3
16
20
23
27
98
113
117
136
153
158
166
188
187
216
261
299
351
109
132
150
172
183
216
247
285
327
378
445
482
552
638
750
801
188
215
250
60
70
79
95
110
127
147
60.0
488
565
585
679
764
792
832
938
75.0
23
27
38
44
51
58
68
104
122
80
160
186
43
50
57
66
78
99
114
135
Output speed
High n
21
[rpm]
Low n
22
[rpm]
22798
19665
16293
14222
12142
38984
32126
28382
24771
23205
19727
17231
14921
13018
11275
9567
8832
7708
6673
5673
5310
22674
19762
17054
70897
61083
53790
44763
38577
33612
28957
187894
154884
112041
96872
83562
72924
62286
40772
34825
53419
26665
22886
99748
84827
74048
64101
54428
43011
37232
31612
6983
6027
5814
5018
4452
4301
4089
3629
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 62 - R375 U/Z - 225M/4
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1389 71
41869
36135
29940
26116
22302
44250
44250
44250
44250
35869
35869
31656
27408
23922
20709
17576
16231
14160
12266
10416
9762
41639
36312
31329
79031
78677
79650
75668
70871
61746
53197
203550
204966
181425
177000
153503
133954
114413
74889
63968
98129
48976
42046
118590
112395
108413
107970
99970
79013
68393
58074
13868
11965
11558
9956
8850
8540
8124
7204
1.1
1.4
1.6
1.8
2.6
3.0
3.9
4.3
4.8
3.2
3.7
4.0
2.8
1.5
1.8
2.1
2.8
3.3
3.9
4.2
4.3
4.1
4.8
5.5
1.1
1.3
1.5
1.7
1.9
2.1
2.4
1.1
1.3
1.6
1.8
2.1
2.4
2.8
4.3
5.1
2.7
5.6
6.7
1.2
1.3
1.5
1.7
2.0
2.5
2.9
3.4
3.7
4.1
4.4
4.8
2.4
3.6
2.9
3.7
1.4
1.6
2.1
2.3
2.6
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.5
1.7
2.0
2.2
1.5
1.8
2.1
2.3
2.3
2.3
2.6
3.0
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.0
1.0
1.0
1.0
1.2
1.3
1.5
2.4
2.8
1.4
3.0
3.7
1.0
1.0
1.0
1.0
1.1
1.4
1.6
1.9
1.2
1.8
1.4
1.8
1.9
2.1
2.2
2.4
16.56
14.29
11.84
10.33
8.82
28.32
23.34
20.62
18.00
16.86
14.33
12.52
10.84
9.46
8.19
6.95
6.42
5.60
4.85
4.12
3.86
16.47
14.36
12.39
51.51
44.38
39.08
32.52
28.03
24.42
21.04
136.51
112.53
81.40
70.38
60.71
52.98
45.25
29.62
25.30
38.81
19.37
16.63
72.47
61.63
53.80
46.57
39.54
31.25
27.05
22.97
6.35
5.48
5.29
4.56
4.05
3.91
3.72
3.30
SK 103 - R400 Z - 250M/4
SK 102 - R400 Z - 250M/4
SK 93 - R400 U/Z - 250M/4
SK 92 - R400 U/Z - 250M/4
SK 83 - R400 U/Z - 250M/4
SK 82 - R400 U/Z - 250M/4
SK 73 - R400 U/Z - 250M/4
SK 72 - R400 U/Z - 250M/4
3083
3063
2600
2575
2205
2187
1969
1947
85
85
85
85
85
85
85
85 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
B28 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
82
92
97
113
117
136
153
34
39
44
53
59
70
158
166
187
9.8
11.3
13.2
16
20
24
28
20
36
42
48
57
77
89
105
31
36
42
50
80
96
68
81
97
113
27
42
50
58
135
11.3
13.3
16
20
24
28
31
36
42
50
80
96
75.0
170
196
584
678
763
791
831
937
222
267
293
352
409
459
487
564
100.0
39
45
53
63
81
95
113
82
145
167
193
228
307
357
421
123
144
167
201
319
383
125.0
45
53
63
81
95
113
109
167
202
232
271
324
386
452
540
124
144
168
202
320
384
Output speed
High n
21
[rpm]
Low n
22
[rpm]
24966
21744
19160
15957
14523
12089
10408
9266
8744
7540
7284
6275
5576
5381
5124
4540
144051
125705
107368
89925
70278
60030
50277
45958
39462
33904
28187
17797
14806
69517
39082
34073
29400
24913
18461
15895
13479
52056
33904
28090
24515
20930
17532
14691
12549
10514
156689
133830
112094
87606
74827
62667
57286
49188
42268
35135
22178
18452
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 62 - R400 U/Z - 250M/4
Weight approx.
[Lbs]
(460 V)
I
N
1795
[A]
85 27231
26585
27258
27231
26674
22196
19116
17019
16054
13859
13372
11532
10239
9885
9408
8346
177000
177000
177000
177000
168318
143768
120413
110076
94500
81208
67508
42622
35462
95359
93598
81606
70411
59667
44215
38073
32276
64127
58242
63145
58702
50118
41993
35179
30063
25178
177000
177000
177000
167849
143370
120077
109767
94235
80978
67322
42498
35356
2.7
2.7
2.0
2.9
2.3
2.9
3.0
1.1
1.2
1.4
1.7
1.9
2.2
3.3
3.5
3.9
1.2
1.4
1.6
2.0
2.5
2.9
3.5
1.4
2.4
2.8
3.2
3.6
2.9
3.9
4.7
3.2
3.9
4.3
5.0
5.6
6.9
1.1
1.3
1.6
2.0
2.4
2.8
2.8
3.2
2.6
3.4
1.2
1.7
2.2
2.5
3.7
2.6
3.1
3.5
4.0
4.5
5.5
1.4
1.5
1.1
1.6
1.2
1.6
1.6
1.0
1.0
1.0
1.0
1.0
1.2
1.8
1.9
2.1
1.0
1.0
1.0
1.0
1.1
1.2
1.5
1.0
1.0
1.2
1.3
1.5
1.2
1.6
2.0
1.4
1.6
1.8
2.1
2.3
2.9
1.0
1.0
1.0
1.1
1.2
1.5
1.0
1.0
1.0
1.0
1.2
1.3
1.1
1.4
1.5
1.4
1.6
1.8
2.1
2.3
2.9
18.14
15.80
13.92
11.59
10.55
8.78
7.56
6.73
6.35
5.48
5.29
4.56
4.05
3.91
3.72
3.30
60.71
52.98
45.25
37.90
29.62
25.30
21.19
19.37
16.63
14.29
11.88
7.50
6.24
29.30
16.47
14.36
12.39
10.50
7.78
6.70
5.68
21.94
14.29
11.84
10.33
8.82
7.39
6.19
5.29
4.43
52.98
45.25
37.90
29.62
25.30
21.19
19.37
16.63
14.29
11.88
7.50
6.24
SK 103 - R500 U/Z - 280S/4 4152
SK 102 - R500 U/Z - 280S/4 4132
SK 92 - R500 U/Z - 280S/4
SK 82 - R500 U/Z - 280S/4
3645
3257
SK 103 - R500 U/Z - 280M/4 4262
SK 102 - R500 U/Z - 280M/4 4242
111
111
111
111
145
145 i
Regel
5.00
4.00
4.00
4.00
4.00
4.00
4.00
www.nord.com
B29
VARIABLE SPEED HELICAL GEARED MOTORS
P n
[HP]
36
42
48
57
77
89
106
31
36
42
50
80
96
81
97
113
135
42
51
58
68
42
51
58
68
81
97
113
135
13.3
16
20
24
28
57
77
89
106
20
36
42
48
125.0
82
146
167
194
228
308
358
422
150.0
53
63
81
95
113
168
203
232
272
325
387
453
541
146
167
194
228
308
358
422
124
144
168
202
320
384
168
203
232
272
325
387
453
541
Output speed
High n
21
[rpm]
Low n
22
[rpm]
68747
59021
50719
42161
26621
22143
58454
50967
43976
37267
27612
23780
20160
50719
42020
36666
31302
26231
21966
18771
15726
42268
35019
30550
26090
21860
18311
15647
13098
160592
134511
105120
89792
75207
86659
48710
42471
36648
31055
23010
19815
16797
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
SK 92 - R500 U/Z - 280M/4
Weight approx.
[Lbs]
(460 V)
I
N
[A]
3755 145
109767
94235
80978
67322
42498
35356
93332
81376
70207
59499
44091
37967
32187
58242
63145
58534
49976
41878
35073
29975
25107
58242
63145
58534
49976
41878
35073
29975
25107
177000
177000
167849
143370
120077
95359
93332
81376
70207
59499
44091
37967
32187
1.6
1.9
2.1
2.4
2.0
2.6
3.2
2.2
2.6
2.9
3.3
3.7
4.6
2.1
1.7
2.3
2.4
1.1
1.5
1.7
1.9
1.1
1.3
1.7
2.0
2.4
1.4
1.8
2.0
2.2
2.5
2.1
2.7
2.9
2.9
2.3
3.1
3.8
1.1
1.9
2.2
2.6
1.0
1.2
1.3
1.5
1.2
1.6
2.0
1.4
1.6
1.8
2.1
2.3
2.9
1.0
1.0
1.0
1.2
1.3
1.1
1.4
1.5
1.0
1.0
1.1
1.2
1.5
1.0
1.0
1.0
1.2
1.3
1.1
1.4
1.5
1.0
1.0
1.2
1.3
1.5
1.2
1.6
2.0
19.37
16.63
14.29
11.88
7.50
6.24
16.47
14.36
12.39
10.50
7.78
6.70
5.68
14.29
11.84
10.33
8.82
7.39
6.19
5.29
4.43
14.29
11.84
10.33
8.82
7.39
6.19
5.29
4.43
45.25
37.90
29.62
25.30
21.19
29.30
16.47
14.36
12.39
10.50
7.78
6.70
5.68
SK 82 - R500 U/Z - 280M/4
SK 92 - R500 U/Z - 315S/4
SK 82 - R500 U/Z - 315S/4
3367
SK 103 - R500 U/Z - 315S/4 4637
SK 103 - R500 U/Z - 315S/4 4637
SK 102 - R500 U/Z - 315S/4 4617
4130
3742
145
173
173
173
173
173 i
Regel
4.00
4.00
4.00
4.00
4.00
4.00
4.00
B30 www.nord.com
NOTES www.nord.com
B31
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FOOT MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A
AD
SK 02 - R 100 U - 56 C
- 143 TC
- 145 TC
5.12
5.12
SK 12 - R 100 U - 56 C
- 143 TC
- 145 TC
5.31
5.12
- R 150 U - 145 TC
SK 22 - R 150 U - 145 TC 7.28
- R 196 U - 184 TC
7.87
B
BA
BJ
5.28
1.97
1.58
5.47
3.23
2.52
6.89
3.30
D
E
F
3.39
4.33
2.36
4.02
4.13
2.44
4.92
6.30
G
H
J
0.47
0.35
0.98
0.59
0.35
1.19
0.71
0.43
N
O4
QA
1.62
6.02
7.09
2.28
6.69
8.23
2.95
8.86
C
19.33
DB2 EC
0.56
20.47 1.19
23.39 0.08
24.72
0.98
HF
5.98 12.91
5.98 13.54
8.19 16.70
8.19 17.60
LE
6.69
6.69
RA
9.33
9.33
8.74 10.43
8.74 10.43
ZA
3.46
3.46
4.17
4.17
AB
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
FP
7.20
7.20
7.20
7.20
7.20
7.20
L
9.30
10.30
11.30
9.30
10.30
11.30
7.20 11.30
26.89
0.20
9.84 19.80 10.16 12.60
5.04
5.90
8.50 14.00
U
0.750
1.000
7.20 11.30 1.250
UY
Key
0.83
3/16x3/16x1
1.11
1/4x1/4x1-5/8
1.36
V
1.50
2.13
2.75
1/4x1/4x2-1/4
2.71
3.15
1.38
9.80
SK 32 - R 150 U - 145 TC 8.27
8.43
6.10
0.79
3.49
26.79 2.16
8.19 18.78
8.74 10.43 4.17
5.30
7.20 11.30 1.625
1.79
3.25
- R 196 U - 184 TC 3.88
7.28
0.51 10.16 28.96 1.38
9.84 20.98 10.16 12.60 5.04
5.90
8.50 14.00
- R 210 U - 213 TC
- 215 TC
SK 42 - R 196 U - 182 TC
- 18 4 TC
- R 210 U - 213 TC
- 215 TC
7.87
8.46
9.84
3.21
9.41
5.08
4.13
4.72
6.89
6.89
4.72
1.57 11.87 29.59 0.98 10.63 21.53 10.31 13.23 5.51
0.98
0.51
1.57
3.74
11.81
13.78
31.26 2.17
9.84 21.77 10.16 12.60
31.89 1.77 10.63 22.32 10.31 13.23
5.04
5.51
7.40
7.40
5.90
5.90
7.40
7.40
10.30
10.30
8.50
8.50
10.30
10.30
15.60
16.70
12.30
14.00
15.60
16.70
3/8x3/8x2-1/2
1.875 2.09
3.50
1/2x1/2x2-3/4
- R 250 U - 254 TC
SK 52 - R 196 U - 182 TC
- 18 4 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
- R 280 U - 256 TC
- R 300 U - 284 TC
- 28 6 TC
- R 350 U - 200 L
10.24
9.84
11.14
5.18
4.39
8.35
8.66
5.91
1.38
0.71
1.77
4.24
13.27
15.81
34.29 0.79 12.44 25.35 12.36 15.59
33.29 3.63
9.84 23.23 10.16 12.60 5.04
33.92 3.23 10.63 23.78 10.31 13.23
36.32 2.25 12.44 26.81 12.36 15.59
37.23 1.26 14.09 29.02 13.58 16.50
40.26 0.20 16.30 33.31 16.81 19.53
6.34
5.51
6.34
7.01
9.70
5.90
5.90
7.40
7.40
9.70
9.70
8.27 12.70
12.70
13.30 18.20
8.50
8.50
10.30
10.30
13.30 18.20
13.30 20.00
15.20
15.20
12.30
14.00
15.60
16.70
20.30
21.80
40.26 0.20 16.30 33.31 16.81 19.53 8.27 12,05 15,67 27,09
2.250
2.47
4.00
1/2x1/2x3-1/4
B32
Technical design may be subject to change. DXF files available upon request.
www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FLANGE MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensons
Type
AJ AD1 BB
BD
BF
GA
O5
SA
QA C DB2 EC HF LE RA ZA AB FP L
U UY V
AK AH1
Key
SK 02 F - R 100 U - 56 C
- 143 TC
- 145 TC
5.12
4.331
5.12
1.50
0.14
6.30
0.35
0.39
6.14
3.50
7.09
19.33 0.67
5.98 13.02 6.69
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
0.750
0.83
1.50
3/16 x 3/16 x 1
SK 12 F - R 100 U - 56 C
- 143 TC
- 145 TC
- R 150 U - 145 TC
5.12
4.331
5.32
2.13
0.14
6.30
0.35
SK 22 F - R 150 U - 145 TC 6.50 7.28 0.14
7.87
0.39
6.85
4.17
8.23
20.47 1.34
23.39 0.23
5.98 13.69 6.69
8.19 16.85
9.33
8.74 10.43
3.46
4.17
5.30
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
7.20 11.30
1.000
1.11
2.13
1/4 x 1/4 x 1-5/8
0.55
0.47
8.86
9.80
- R 196 U - 184 TC 5.118 2.75 0.43 4.92
SK 32 F - R 150 U - 145 TC 8.46 8.27 0.16 0.63
- R 196 U - 184 TC
- R 210 U - 213 TC
- 215 TC
7.087 3.25
6.10
24.72 0.98
26.89 0.20
26.79 2.16
9.84 10.16 11.87 28.96 1.38
8.19 17.60
8.74 10.43
9.84 19.80 10.16 12.60
8.19 18.78 8.74 10.43
9.84 20.98 10.16 12.60
29.59 0.98 10.63 21.53 10.31 13.23
4.17
5.04
4.17
5.04
5.51
5.30
5.90
5.30
5.90
7.40
7.40
7.20 11.30 1.250
8.50 14.00
8.50 14.00
10.30
10.30
15.60
16.70
1.36
2.75
1/4 x 1/4 x 2-1/4
7.20 11.30 1.625
1.79
3.25
3/8 x 3/8 x 2-1/2
SK 42 F - R 196 U - 182 TC
- 18 4 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
SK 52 F - R 196 U - 182 TC
- 18 4 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
- R 280 U - 256 TC
- R 300 U - 284 TC
- 28 6 TC
- R 350 U - 200 L
8.46
8.47
7.087 3.50
10.43 10.24
9.055 4.00
0.16
9.84
0.55
0.16
11.81
0.55
0.63
11.81 13.78
6.89
0.79
13.27 15.81
8.35
31.26 2.17
33.29 3.63
9.84 21.77 10.16 12.60 5.04
31.89 1.77 10.63 22.32 10.31 13.23 5.51
34.29 0.79 12.44 25.35 12.36 15.59 6.34
9.84 23.23 10.16 12.60 5.04
33.92 3.23 10.63 23.78 10.31 13.23
5.51
36.32 2.25 12.44 26.81 12.36 15.59 6.34
37.23 1.26 14.09 29.02 13.58 16.50 7.01
5.90
5.90
7.40
7.40
9.70 13.30 18.20
5.90
5.90
7.40
7.40
9.70 13.30 18.20
9.70 13.30 18.20
40.26 0.20 16.30 33.31 16.81 19.53 8.27 12.70
12.70
8.50
8.50
10.30
10.30
8.50
8.50
10.30
10.30
15.20
15.20
12.30
14.00
15.60
16.70
12.30
14.00
15.60
16.70
20.30
21.80
40.26 0.20 16.30 33.31 16.81 19.53 8.27 12,05 15,67 27,09
1.875
2.09
3.50
1/2 x 1/2 x 2-3/4
2.250
2.47
4.00
1/2 x 1/2 x 3-1/4
SIZE
SK 02 F
SK 12 F
SK 22 F
SK 32 F
SK 42 F
SK 52 F
AJ
3.94 / 4.53
3.94 / 4.53
5.12
6.50
6.50
8.46
ADDITIONAL FLANGE SIZES AVAILABLE
AK BB BD
3.150 / 3.740
3.150 / 3.740
4.331
5.118
5.118
7.087
0.12 / 0.12
0.12 / 0.12
0.14
0.14
0.14
0.16
4.72 / 5.51
4.72 / 5.51
6.30
7.87
7.87
9.84
BF
0.28 / 0.35
0.28 / 0.35
0.35
0.43
0.43
0.55
Technical design may be subject to change. DXF files available upon request.
GA
0.39 / 0.39
0.39 / 0.39
0.39
0.47
0.55
0.63
www.nord.com
B33
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FOOT MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A BA D
E
F
G
H
J
N
O5
QA
C DB2 EC HF LE RA ZA AB FP L
U UY V
B BJ
Key
SK 63 - R 196 U - 182 TC
- 18 4 TC
- R 280 U - 254 TC
- 256 TC
- R 300 U - 284 TC
- 28 6 TC
12.99
13.58
6.34
9.84
10.24
5.43 11.61
1.77
0.87
5.24
15.75
35.51
42.48
5.12
9.84 24.72 10.16 12.60
1.69 16.30 34.80 16.81 19.53
5.04
2.76 18.03 39.45 2.76 14.09 30.51 13.58 16.50 7.01
5.90
5.90
9.70
9.70
8.27 12.70
12.70
8.50
8.50
13.30
13.30
15.20
15.20
12.30
14.00
18.20
20.00
20.30
21.80
2.500
2.77
5.00
5/8 x 5/8 x 4
- R 350 U - 200 L 42.48 1.69 16.30 34.80 16.81 19.53
8.27 12.05 15.67 27.09
SK 62 - R 280 U - 256 TC 12.99 6.34 9.84
1.77
5.24
42.25 2.76 14.09 30.51 13.58 16.50
7.01
9.70
13.30 20.00 2.500
2.77
5.00
- R 300 U - 284 TC
- 28 6 TC 13.58 5.43
- R 350 U - 200 L
10.24
11.61
0.87
2.76
15.75
19.06
45.28 1.69 16.30 34.80 16.81 19.53
8.27 12.70
12.70
15.20
15.20
20.30
21.80
45.28 1.69 16.30 34.80 16.81 19.53 8.27 12.05 15.67 27.09
5/8 x 5/8 x 4
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
51.42
51.42
0
0
19.69 40.39 20.71 22.44 9.45 12.05
19.69 40.39 20.71 22.44
12.05
15.67
15.67
27.09
27.09
9.45 16.93 20.47 31.10
SK 73 - R 280 U - 254 TC
- 256 TC
- R 300 U - 284 TC
- 28 6 TC
- R 350 U - 200 L
15.75
15.16
7.04 11.02
12.79
5.94 12.99
2.17
1.02
5.74
17.60
44.08 3.94 14.09 31.69 13.58 16.50 7.01
2.76 20.89 47.11
2.87 16.30 35.98 16.81 19.53
9.70
9.70
8.27 12.70
12.70
13.30
13.30
15.20
15.20
18.20
20.00
20.30
21.80
47.11 2.87 16.30 35.98 16.81 19.53 8.27 12.05 15.67 27.09
3.000
3.33
5.50
3/4x 3/4 x 4-1/2
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
53.25 1.18 19.69 41.57 20.71 22.44 9.45 12.05
12.05
15.67
15.67
27.09
27.09
53.25 1.18 19.69 41.57 20.71 22.44 9.45 16.93 20.47 31.10
SK 72 - R 350 U - 200 L
15.75
7.04 11.02
2.17
5.74
46.84
2.87 16.30 35.98 16.81 19.53
8.27 12.05 15.67 27.09 3.000
3.33
5.50
- R 375 U - 225 S
- 225 M 15.16
5.94
- R 400 U - 250 M
12.79
12.99
1.02
2.76
17.60
20.62
52.98 1.18 19.69 41.57 20.71 22.44 9.45 12.05
52.98
1.18 19.69 41.57 20.71 22.44
12.05
15.67
15.67
27.09
27.09
9.45 16.93 20.47 31.10
3/4x 3/4 x 4-1/2
B34
Technical design may be subject to change. DXF files available upon request.
www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FLANGE MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ AD BB
BD
BF
GA
O5
SA
QA C DB2 EC HF LE RA ZA AB FP L
U UY V
AK AH1
Key
SK 63 F - R 196 U - 182 TC
- 18 4 TC
- R 280 U - 254 TC
- 256 TC
- R 300 U - 284 TC
- 28 6 TC
- R 350 U - 200 L
10.43 12.99
9.055 5.00
- R 375 U - 225 S
- 225 M 9.843 5.50
- R 400 U - 250 M
0.16
11.81
0.55
13.78
0.71
0.95
15.55 19.76
9.65
15.75
10.83
37.24 4.92
9.84 24.53 10.16 12.60
5.04
41.18 2.56 14.09 30.31 13.58 16.50 7.01
5.90
5.90
9.70
9.70
44.21 1.50 16.30 34.61 16.81 19.53 8.27 12.70
55.54
12.70
13.30
13.30
18.20
20.00
44.21 1.50 16.30 34.61 16.81 19.53 8.27 12.05 15.67 27.09
23.18 55.54 0.98 19.69 41.38 20.71 22.44 9.45 12.05
12.05
8.50
8.50
15.20
15.20
15.67
15.67
12.30
14.00
20.30
21.80
27.09
27.09
0.98 19.69 41.38 20.71 22.44 9.45 16.93 20.47 31.10
2.500
2.77
5.00
5/8 x 5/8 x 4
SK 62 F - R 280 U - 256 TC 10.43 12.99 0.16 0.95
- R 300 U - 284 TC
- 28 6 TC 9.055 5.00
- R 350 U - 200 L
11.81
0.55
15.55
9.65
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 73 F - R 280 U - 254 TC
- 256 TC
- R 300 U - 284 TC
- 28 6 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 72 F - R 350 U - 200 L
11.81 15.75 0.20
9.843 5.50
13.78
15.75 23.45
0.71 10.83
11.81 15.75 0.20
0.95
0.95
43.98 2.56 14.09 3.031 13.58 16.50
20.79 47.01 1.50 16.30 34.61 16.81 19.53 8.27 12.70
47.01 1.50 16.30 34.61 16.81 19.53
12.70
15.20
15.20
8.27 12.05 15.67 27.09
53.15 -0.20 19.69 40.20 20.71 22.44 9.45 12.05
46.64 3.74 14.09 31.50 13.58 16.50 7.01
12.05
9.70
9.70
12.70
15.67
15.67
15.20
15.20
20.30
21.80
27.09
27.09
53.15 -0.20 19.69 40.20 20.71 22.44 9.45 16.93 20.47 31.10
49.67 2.68 16.30 35.79 16.81 19.53 8.27 12.70
49.67
55.81
55.81
7.01
9.70
2.68 16.30 35.79 16.81 19.53 8.27 12.05 15.67 27.09
0.98 19.69 41.38 20.71 22.44 9.45 12.05
12.05
13.30 20.00 2.500
13.30
13.30
15.67
15.67
18.20
20.00
20.30
21.80
27.09
27.09
0.98 19.69 41.38 20.71 22.44 9.45 16.93 20.47 31.10
5/8 x 5/8 x 4
3.000
3/4x 3/4 x 4-1/2
49.40 2.68 16.30 35.79 16.81 19.53 8.27 12.05 15.67 27.09 3.000
2.77
3.33
3.33
5.00
5.50
5.50
3/4x 3/4 x 4-1/2 www.nord.com
Technical design may be subject to change. DXF files available upon request.
B35
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FOOT MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A BA D
E
F
G
H
J
N
O5
QA
C DB2 EC HF LE RA ZA AB FP L
U UY V
B BJ
Key
SK 83 - R 300 U - 256 TC
- 28 4 TC
- 28 6 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 82 - R 350 U - 200 L
17.72
18.58
8.52
7.07
12.40
14.17
15.75
2.17
1.30
3.54
6.99
20.16
24.11
50.33 4.25
50.33 4.25
56.47 2.56
56.47 2.56
16.30 37.36 16.81 19.53 8.27
16.30 37.36 16.81 19.53
19.69 38.90 20.71 22.44
19.69 38.90 20.71 22.44
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
8.27 12.05 15.67 27.09
9.45 12.05
12.05
15.67
15.67
27.09
27.09
9.45 19.63 20.47 31.10
3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
17.72
18.58
8.52
7.07
12.40
14.17
15.75
2.17
1.30
3.54
6.99
20.16
24.11
52.93 4.25
16.30 37.36 16.81 19.53
8.27 12.05 15.67 27.09 3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
SK 82 - R 375 U - 225 S
- 225 M
- R 400 U - 250 M
- R 500 U - 280 S
- 28 0 M
- 315 S
17.72 8.52 12.40
14.17
2.17
1.30
6.99
20.16
56.47 2.56
18.58 7.07 15.75 3.54 24.74 56.47 2.56
19.69 42.95 20.71 22.44 9.45 12.05
12.05
19.69 42.95 20.71 22.44 9.45 19.63 20.47 31.10
59.62 - 0.79 19.69 60.79 35.20 25.24 11.81 17.91
17.91
20.28
15.67
15.67
22.64
22.64
25.39
27.09
27.09
34.06
34.06
38.19
3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
SK 93 - R 300 U - 256 TC 21.65 10.67 15.35 2.76 8.81 54.09 7.20 16.30 40.31 16.81 19.53 8.27 9.70 13.30 20.00 4.250 4.69 8.50
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
21.26 8.89
17.32
17.72
1.30
4.33
24.33
27.87
60.23 5.51
60.23 5.51
19.69 45.91 20.71 22.44 9.45 12.05
12.05
15.67
15.67
27.09
27.09
19.69 38.90 20.71 22.44 9.45 19.63 20.47 31.10
1 x 1 x 7-1/4
SK 92 - R 375 U - 225 S
- 225 M
- R 400 U - 250 M
21.65 10.67 15.35
17.32
2.76
1.30
8.81
24.33
60.15 5.51
21.26 8.89 17.72 4.33 28.42 60.15 5.51
19.69 45.91 20.71 22.44 9.45 12.05
12.05
15.67
15.67
27.09
27.09
19.69 45.91 20.71 22.44 9.45 16.93 20.47 31.10
4.250
4.69
8.50
1 x 1 x 7-1/4
- R 500 U - 280 S
- 28 0 M
- 315 S
63.30 2.17
19.69 63.74 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
SK 103 - R 300 U - 256 TC 23.62 12.76 17.72 3.15 10.39 61.06 9.57 16.30 42.68 16.81 19.53 8.27 9.70 13.30 20.00 5.250 5.80 10.0
- R 375 U - 225 S
- 225 M 24.61 10.39
18.90
19.88
1.77
4.72
27.80
32.24
63.97 7.87
19.69 48.27 20.71 22.44 9.45 12.05
12.05
15.67
15.67
27.09
27.09
1-1/4x1-1/4x8-3/8
- R 500 U - 280 S
- 28 0 M
- 315 S
SK 102 - R 500 U - 280 S
- 28 0 M
- 315 S
23.62
24.61
12.76
10.39
17.72
18.90
19.88
3.15
1.77
4.72
10.39
27.80
31.89
67.12 4.53
66.77 4.53
19.69 66.10 20.71 22.44
9.45 17.91
17.91
20.28
19.69 66.10 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
22.64
22.64
25.39
34.06
34.06
38.19
34.06
34.06
38.19
5.250
5.80 10.0
1-1/4x1-1/4x8-3/8
Technical design may be subject to change. DXF files available upon request.
B36 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FLANGE MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ
AK
AD
AH1
BB
BD
BF
GA
O5
SA
QA
SK 83 F - R 300 U - 256 TC
- 28 4 TC
- 28 6 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 82 F - R 350 U - 200 L
15.75
13.780
17.72
6.75
0.20
17.72
0.71
1.02
19.92
12.17
27.10
15.75
17.72
0.20
17.72
0.71
1.02
19.92
12.17
27.06
13.780
6.75
SK 82 F - R 375 U - 225 S
- 225 M
15.75 17.72 0.20
17.72
1.02
19.92 27.69
- R 400 U - 250 M 13.780 6.75 0.71 12.17
- R 500 U - 280 S
- 28 0 M
- 315 S
SK 93 F - R 300 U - 256
TC
15.75 21.65 0.20
1.10
C DB2 EC HF LE RA ZA
53.32 4.02 16.30 37.13 16.81 19.53 8.27
53.32
59.46
59.46
55.58
59.42
59.42
4.02 16.30 37.13 16.81 19.53
2.32 19.69 42.72 20.71 22.44
2.32 19.69 42.72 20.71 22.44
4.02 16.30 37.13 16.81 19.53
2.32 19.69 42.72 20.71 22.44
2.32 19.69 42.72 20.71 22.44
13.30
15.20
15.20
20.00
20.30
21.80
8.27 12.05 15.67 27.09
9.45 12.05
9.45 19.63 20.47 31.10
U
3.500
7/8 x 7/8 x 5-1/2
8.27 12.05 15.67 27.09 3.500
9.45 12.05
15.67
15.67
27.09
27.09
9.45 19.63 20.47 31.10
62.47 -1.02 19.69 60.55 35.20 25.24 11.81 17.91
56.89 6.97 16.30 40.08 16.81 19.53 8.27
AB
9.70
12.70
12.70
12.05
12.05
17.91
20.28
FP
15.67
15.67
22.64
22.64
25.39
L
27.09
27.09
34.06
34.06
38.19
7/8 x 7/8 x 5-1/2
3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
9.70 13.30 20.00 4.250
UY
Key
3.88
3.88
4.69
V
6.75
6.75
8.50
- R 375 U - 225 S
- 225 M 13.780 8.50
- R 400 U - 250 M
17.72
0.71
24.09
15.12
30.67 63.03 5.28 19.69 45.67 20.71 22.44 9.45 12.05
SK 92 F - R 375 U - 225 S
- 225 M
15.75 21.65 0.20
17.72
1.10
24.09 31.22
- R 400 U - 250 M 13.780 8.50 0.71 15.12
- R 500 U - 280 S
- 28 0 M
- 315 S
62.95
5.28 19.69 45.67 20.71 22.44
62.95 5.28 19.69 45.67 20.71 22.44
12.05
9.45 12.05
12.05
9.45 16.93 20.47 31.10
66.10 1.93 19.69 63.50 35.20 25.24 11.81 17.91
17.91
20.28
15.67
15.67
25.39
27.09
27.09
63.03 5.28 19.69 45.67 20.71 22.44 9.45 19.63 20.47 31.10
15.67
15.67
22.64
22.64
27.09
27.09
34.06
34.06
38.19
SK 103 F - R 300 U - 256
TC
19.68 23.62 0.20
- R 375 U - 225 S
- 225 M 17.717 10.00
21.65
0.71
1.26
27.48
17.40
- R 500 U - 280 S
- 28 0 M
- 315 S
SK 102 F - R 500 U - 280 S
- 28 0 M
- 315 S
19.68
17.717
23.62
10.00
0.20
21.65
0.71
1.26
27.48
17.40
35.59 67.32 7.56 19.69 47.95 20.71 22.44
35.24
64.41
70.47
70.12
9.25 16.30 42.36 16.81 19.53 8.27
4.21 19.69 65.79 20.71 22.44
9.45 12.05
12.05
9.45 17.91
17.91
20.28
4.21 19.69 65.79 35.20 25.24 11.81 17.91
17.91
20.28
15.67
15.67
22.64
22.64
25.39
22.64
22.64
25.39
27.09
27.09
34.06
34.06
38.19
34.06
34.06
38.19
1 x 1 x 7-1/4
4.250
4.69
8.50
1 x 1 x 7-1/4
9.70 13.30 20.00 5.250
5.80 10.0
1-1/4x 1-1/4 x 8-3/8
5.250
5.80 10.0
1-1/4x 1-1/4 x 8-3/8
Technical design may be subject to change. DXF files available upon request.
www.nord.com
B37
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FOOT MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A B
BA
BJ
D
E
F
G
H
J
N
O4
QA
C DB2 EC HF LE RA ZA AB FP L
U UY V
AD
Key
SK 02 - R 100 Z - 56 C
- 143 TC
- 145 TC
SK 12 - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 22 - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 196 Z - 184 TC
SK 32 - R 100 Z - 56 C
- 143 TC
- 145 TC
5.12
5.12
5.31
5.12
7.28
7.87
8.27
7.87
5.28
1.97
1.58
5.47
3.23
2.52
6.89
3.30
2.71
8.43
3.88
3.21
3.39
4.33
2.36
4.02
4.13
2.44
4.92
6.30
3.15
6.10
7.28
4.72
0.47
0.35
0.98
0.59
0.35
1.19
0.71
0.43
1.38
0.79
0.51
1.57
1.62
6.02
7.09
2.28
6.69
8.23
2.95
8.86
9.80
3.49
10.16
11.87
22.77
23.77
24.77
23.91
24.91
25.91
27.05
28.05
29.05
29.12
30.12
31.12
0.56
1.19
28.43 0.08
2.09
29.76 0.98
33.33 0.20
3.27
5.98 12.91
5.98 13.54
8.19 16.70
5.98 14.44
8.19 17.60
5.98 15.62
6.69
6.69
6.69
6.69
9.33
9.33
8.74 10.43
9.33
8.74 10.43
9.84 19.80 10.16 12.60
9.33
3.46
3.46
4.17
3.46
4.17
5.04
3.46
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.90
5.30
5.30
5.30
7.20
7.20
7.20
7.20
7.20
7.20
9.30
10.30
11.30
9.30
10.30
11.30
7.20 11.30
7.20
7.20
7.20
7.20 11.30
8.50 14.00
7.20
7.20
7.20
9.30
10.30
11.30
9.30
10.30
11.30
0.750
3/16x1/16x1
1.000
1/4x1/4x1-5/8
1.250
1/4x1/4x2-1/4
1.625
0.83
1.11
1.36 2.75
1.79
1.50
2.13
3.25
- R 150 Z - 145 TC
- R 196 Z - 184 TC
31.83 2.16
35.40
1.38
8.19 18.78
8.74 10.43
9.84 20.98 10.16 12.60
4.17
5.04
5.30
5.90
7.20 11.30
8.50 14.00
3/8x3/8x2-1/2
- R 210 Z - 213 TC
- 215 TC
37.47
38.57
0.98 10.63 21.53 10.31 13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
SK 42 - R 150 Z - 145 TC 8.46
9.41
6.89
0.98
3.74
34.14 2.95
8.19 19.57
8.74 10.43 4.17
5.30
7.20 11.30 1.875 2.09
3.50
- R 196 Z - 182 TC
- 18 4 TC 9.84
5.08
4.13
6.89
4.72
0.51
1.57
11.81
13.78
36.00
37.70
2.17
9.84 21.77 10.16 12.60 5.04
5.90
5.90
8.50
8.50
12.30
14.00
1/2x1/2x2-3/4
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
39.77
40.87
1.77 10.63 22.32 10.31 13.23 5.51
43.24 0.79 12.44 25.35 12.36 15.59
6.34
7.40
7.40
9.70
10.30
10.30
15.60
16.70
13.30 18.20
SK 52 - R 150 Z - 145 TC 10.24 11.14 8.35
1.38
4.24
36.17
4.41
8.19 21.03
8.74 10.43
4.17
5.30
7.20 11.30 2.250
2.47
4.00
- R 196 Z - 182 TC
- 18 4 TC 9.84
5.18
4.39
8.66
5.91
0.71
1.77
13.27
15.81
38.03
39.73
3.63
9.84 23.23 10.16 12.60
5.04
5.90
5.90
8.50
8.50
12.30
14.00
1/2x1/2x3-1/4
- R 210 Z - 213 TC
- 215 TC
41.80
42.90
3.23 10.63 23.78 10.31 13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 28 6 TC
- R 350 Z - 200 L
45.27
47.74
49.30
50.80
56.09
2.25 12.44 26.81 12.36 15.59
1.26 14.09 29.02 13.58 16.50
0.20 16.30 33.31 16.81 19.53
0.20 16.30 33.31 16.81 19.53
6.34
7.01
9.70
9.70
8.27 12.70
12.70
13.30 18.20
13.30 20.00
15.20
15.20
20.30
21.80
8.27 12.05 15.67 27.09
Technical design may be subject to change. DXF files available upon request.
B38 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FLANGE MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions
Type
AJ
AK
AD1
AH1
BB
BD
BF
GA
O5
SA
SK 02 F - R 100 Z - 56 C
- 143 TC
- 145 TC
SK 12 F - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 22 F - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 196 Z - 184 TC
SK 32 F - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 196 Z - 184 TC
5.12
4.331
5.12
4.331
6.50
5.118
8.46
7.087
5.12
1.50
5.32
2.13
7.28
2.75
8.27
3.25
0.14
6.30
0.35
0.14
6.30
0.35
0.14
7.87
0.43
0.16
9.84
0.55
0.39
6.14
3.50
0.39
6.85
4.17
0.47
8.86
4.92
0.63
10.16
6.10
- R 210 Z - 213 TC
- 215 TC
SK 42 F - R 150 Z - 145 TC 8.46
8.47
0.16
0.63
- R 196 Z - 182 TC
- 18 4 TC 7.087 3.50
9.84
0.55
11.81
6.89
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
SK 52 F - R 150 Z - 145 TC 10.43 10.24 0.16 0.79
- R 196 Z - 182 TC
- 18 4 TC 9.055 4.00
11.81
0.55
13.27
8.35
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 28 6 TC
- R 350 Z - 200 L
QA
7.09
8.23
9.80
11.87
C
22.77
23.77
24.77
23.91
24.91
25.91
DB2
0.67
Outline dimensions
EC HF
8.19 18.78
LE
5.98 13.02 6.69
5.98 15.62 6.69
RA
9.33
ZA
3.46
Motor dimensions
AB
5.30
5.30
5.30
FP
7.20
7.20
7.20
L
9.30
10.30
11.30
28.43
0.23
8.19 16.85 8.74 10.43 4.17
5.30
7.20 11.30
27.05
28.05
29.05
2.09
29.76 0.98
33.33 0.20
29.12
30.12
31.12
3.27
31.83 2.16
35.40 1.38
37.47
38.57
5.98 14.44 6.69
9.33
8.19 17.60 8.74 10.43
9.84 19.80 10.16 12.60
9.33
8.74 10.43
9.84 20.98 10.16 12.60
3.46
4.17
5.04
3.46
4.17
5.04
5.30
5.30
5.30
5.30
5.90
5.30
5.30
5.30
5.30
5.90
7.20
7.20
7.20
7.20 11.30
8.50 14.00
7.20
7.20
7.20
9.30
10.30
11.30
9.30
10.30
11.30
7.20 11.30
8.50 14.00
34.14 2.95
8.19 19.57 8.74 10.43
4.17
5.30
7.20 11.30 1.875
2.09
3.50
45.27
47.74
49.30
50.80
1.34
5.98 13.69
6.69
9.33
0.98 10.63 21.53 10.31 13.23
2.25 12.44 26.81 12.36 15.59
1.26 14.09 29.02 13.58 16.50
0.20 16.30 33.31 16.81 19.53
3.46
5.51
6.34
7.01
5.30
5.30
5.30
7.40
7.40
9.70 13.30 18.20
9.70 13.30 20.00
8.27 12.70
12.70
7.20
7.20
7.20
10.30
10.30
15.20
15.20
9.30
10.30
11.30
15.60
16.70
20.30
21.80
56.09
0.20 16.30 33.31 16.81 19.53
8.27 12.05 15.67 27.09
Shaft dimensions
U
0.750
UY
Key
0.83
V
1.50
3/16 x 3/16 x 1
1.000
1.11
2.13
1/4 x 1/4 x 1-5/8
1.250
1.36
2.75
1/4 x 1/4 x 2-1/4
1.625
1.79
3.25
3/8 x 3/8 x 2-1/2
13.78 36.00
37.70
2.17
9.84 21.77 10.16 12.60 5.04
5.90
5.90
8.50
8.50
12.30
14.00
1.77 10.63 22.32 10.31 13.23 5.51
7.40
7.40
10.30
10.30
15.60
16.70
1/2 x 1/2 x 2-3/4
39.77
40.87
43.24 0.79 12.44 25.35 12.36 15.59
6.34
9.70 13.30 18.20 2.250
2.47
4.00
36.17 4.41
8.19 21.03 8.74 10.43
4.17
5.30
7.20 11.30
15.81 38.03
39.73
41.80
42.90
3.63
9.84 23.23 10.16 12.60 5.04
3.23 10.63 23.78 10.31 13.23 5.51
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
1/2 x 1/2 x 3-1/4
Additional flange sizes available see page B33
Technical design may be subject to change. DXF files available upon request.
www.nord.com
B39
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FOOT MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A BA D
10.24
11.61
G
0.87
2.76
N
15.75
19.06
54.32
55.82
1.69 16.30 34.80 16.81 19.53 8.27 12.70
12.70
15.20
15.20
20.30
21.80
U UY
5/8 x 5/8 x 4
V
B BJ
E
F
H
J
O5
QA
C DB2 EC HF LE RA ZA AB FP L
Key
SK 63 - R 150 Z - 184 TC 12.99 6.34 9.84
1.77
5.24
39.39 5.91
8.19 22.52
8.74 10.43 4.17
5.90
8.50 12.30 2.500
2.77
5.00
- R 196 Z - 182 TC
- 18 4 TC 13.58 5.43
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
10.24
11.61
0.87
2.76
15.75
18.03
40.25
41.95
44.02
45.12
5.12
9.84 24.72 10.16 12.60 5.04
4.72 10.63 25.28 10.31 13.23 5.51
47.49 3.74 12.44 26.31 12.36 15.59 6.34
5.90
5.90
7.40
7.40
9.70
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
13.30 18.20
5/8 x 5/8 x 4
- R 280 Z - 254 TC
- 256 TC
- R 300 Z - 284 TC
- 28 6 TC
48.16
49.96
51.52
53.02
2.76 14.09 30.51 13.58 16.50
1.69 16.30 34.80 16.81 19.53
7.01
9.70
9.70
8.27 12.70
12.70
13.30
13.30
15.20
15.20
18.20
20.00
20.30
21.80
- R 350 Z - 200 L 58.58 1.69 16.30 34.80 16.81 19.53 8.27 12.05 15.67 27.09
SK 62 - R 280 Z - 256 TC 12.99 6.34 9.84
1.77
5.24
52.76 2.76 14.09 30.51 13.58 16.50 7.01
9.70
13.30 20.00 2.500
2.77
5.00
- R 300 Z - 284 TC
- 28 6 TC 13.58 5.43
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 280 Z - 254 TC
- 256 TC
61.11 1.69 16.30 34.80 16.81 19.53
65.52
65.52
- R 400 Z - 250 M 64.53
0 19.69 40.39 20.71 22.44
9.45 16.93 20.47 31.10
SK 73 - R 196 Z - 184 TC 15.75 7.04 11.02 2.17 5.74 44.81 6.30 9.84 25.91 10.16 12.60 5.04 5.90
8.50 14.00
- R 210 Z - 213 TC
- 215 TC 15.16 5.94
- R 250 Z - 254 TC
12.79
12.99
1.02
2.76
17.60
20.89
46.88
47.98
5.91 10.63 26.46 10.31 13.23
5.51
52.12 4.92 12.44 29.49 12.36 15.59 6.34
7.40
7.40
9.70
10.30
10.30
15.60
16.70
13.30 18.20
52.79
54.59
0 19.69 40.39 20.71 22.44
8.27 12.05 15.67 27.09
9.45 12.05
3.94 14.09 31.69 13.58 16.50 7.01
12.05
9.70
9.70
15.67
15.67
13.30
13.30
27.09
27.09
18.20
20.00
3.000
3.33
5.50
- R 300 Z - 284 TC
- 28 6 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
56.15
57.65
62.94 2.87 16.30 35.98 16.81 19.53 8.27 12.05 15.67 27.09
67.35
67.35
2.87 16.30 35.98 16.81 19.53 8.27 12.70
12.70
1.18 19.69 41.57 20.71 22.44 9.45 12.05
12.05
15.20
15.20
15.67
15.67
20.30
21.80
27.09
27.09
3/4x 3/4 x 4-1/2
- R 400 Z - 250 M 71.36
1.18 19.69 41.57 20.71 22.44
9.45 16.93 20.47 31.10
SK 72 - R 350 Z - 200 L 15.75
7.04 11.02
2.17
5.74
62.67
2.87 16.30 35.98 16.81 19.53
8.27 12.05 15.67 27.09 3.000
3.33
5.50
- R 375 Z - 225 S
- 225 M 15.16
5.94
- R 400 Z - 250 M
12.79
12.99
1.02
2.76
17.60
20.62
67.08
67.08
71.09
1.18 19.69 41.57 20.71 22.44
1.18 19.69 41.57 20.71 22.44
9.45 12.05
12.05
15.67
15.67
27.09
27.09
9.45 16.93 20.47 31.10
3/4x 3/4 x 4-1/2
Technical design may be subject to change. DXF files available upon request.
B40 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FLANGE MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions
Type
AJ AD BB
BD
GA
O5
AK AH1 BF SA
SK 63 F - R 150 Z - 184 TC 10.43 12.99 0.16 0.95
- R 196 Z - 182 TC
- 18 4 TC 9.055 5.00
11.81
0.55
15.55
9.65
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 254 TC
- 256 TC
- R 300 Z - 284 TC
- 28 6 TC
- R 350 Z - 200 L
SK 62 F - R 280 Z - 256 TC 10.43 12.99 0.16 0.95
- R 300 Z - 284 TC
- 28 6 TC 9.055 5.00
- R 350 Z - 200 L
11.81
0.55
15.55
9.65
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 73 F - R 196 Z - 184 TC 11.81 15.75 0.20 0.95
- R 210 Z - 213 TC
- 215 TC 9.843 5.50
- R 250 Z - 254 TC
13.78
0.71
15.75
10.83
- R 280 Z - 254 TC
- 256 TC
- R 300 Z - 284 TC
- 28 6 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 72 F - R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M 9.843
5.50
- R 400 Z - 250 M
11.81 15.75
0.20
13.78
0.71
0.95
15.75
10.83
QA C
45.75
46.85
FP
10.30
10.30
L
15.60
16.70
49.22 3.74 12.44 28.11 12.36 15.59
6.34
9.70
13.30 18.20
49.89 2.56 14.09 30.31 13.58 16.50
7.01
9.70
53.25
54.75
60.31 1.50 16.30 34.61 16.81 19.53 8.27 12.05 15.67 27.09
67.25
67.25
-0.20 19.69 40.20 20.71 22.44 9.45 12.05
12.05
15.67
15.67
27.09
27.09
66.26 -0.20 19.69 40.20 20.71 22.44 9.45 16.93 20.47 31.10
55.35
57.15
57.71
60.21
65.50 2.68 16.30 35.79 16.81 19.53 8.27 12.05 15.67 27.09
69.91
69.91
DB2 EC HF LE RA
4.53 10.63 25.08 10.31 13.23
ZA
5.51
3.74 14.09 31.50 13.58 16.50 7.01
AB
7.40
7.40
9.70
1.50 16.30 34.61 16.81 19.53 8.27 12.70
12.70
9.70
9.70
2.68 16.30 35.79 16.81 19.53 8.27 12.70
12.70
0.98 19.69 41.38 20.71 22.44 9.45 12.05
12.05
13.30
13.30
15.20
15.20
13.30
13.30
15.20
15.20
15.67
15.67
18.20
20.00
20.30
21.80
18.20
20.00
20.30
21.80
27.09
27.09
73.92
0.98 19.69 41.38 20.71 22.44
9.45 16.93 20.47 31.10
U UY V
Key
41.12
5.71
8.19 22.32 8.74 10.43
4.17
5.90
8.50
14.00 2.500
2.77
5.00
19.76 41.98
43.68
4.92
9.84 24.53 10.16 12.60
5.04
5.90
5.90
8.50
8.50
12.30
14.00
54.49 2.56 14.09 30.31 13.58 16.50 7.01
9.70
13.30 20.00 2.500
2.77
5.00
20.79 56.05
57.55
1.50 16.30 34.61 16.81 19.53 8.27 12.70
12.70
15.20
15.20
20.30
21.80
62.84 1.50 16.30 34.61 16.81 19.53 8.27 12.05 15.67 27.09
5/8 x 5/8 x 4
47.37 6.10
Outline dimensions
9.84 25.71 10.16 12.60 5.04
Motor dimensions
5.90
8.50
Shaft dimensions
5/8 x 5/8 x 4
14.00 3.000
3.33
5.50
23.45 49.44
50.54
5.71 10.63 26.26 10.31 13.23 5.51
7.40
7.40
10.30
10.30
15.60
16.70
3/4x 3/4 x 4-1/2
54.68 4.72 12.44 29.29 12.36 15.59 6.34
9.70
13.30 18.20
65.23
2.68 16.30 35.79 16.81 19.53
8.27 12.05 15.67 27.09 3.000
3.33
5.50
23.18 69.94
69.94
0.98 19.69 41.38 20.71 22.44
9.45 12.05
12.05
15.67
15.67
27.09
27.09
73.65
0.98 19.69 41.38 20.71 22.44
9.45 16.93 20.47 31.10
3/4x 3/4 x 4-1/2
Technical design may be subject to change. DXF files available upon request.
www.nord.com
B41
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FOOT MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A BA D G N U UY V
B BJ
E
F
H
J
O5
QA
C DB2 EC HF LE RA ZA AB FP L
Key
SK 83 - R 210 Z - 213 TC
- 215 TC
17.72 8.52
12.40
14.17
21.7
1.30
6.69
20.16
50.10
51.20
7.28 10.63 27.83 10.31 13.23
5.51
9.70
9.70
10.30
10.30
15.60
16.70
3.500
3.88
6.75
- R 250 Z - 254 TC 18.58 7.07 15.75 3.54 24.11 55.34 6.30 12.44 30.87 12.36 15.59 6.34 9.70 13.30 18.20
7/8 x 7/8 x 5-1/2
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 28 4 TC
- 28 6 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 82 - R 350 Z - 200 L 17.72
18.58
8.52
7.07
12.40
14.17
15.75
2.17
1.30
3.54
6.99
20.16
24.11
57.81 5.31 14.09 33.07 13.58 16.50
59.07
59.37
60.87
70.57
70.57
68.76
4.25 16.30 37.36 16.81 19.53
66.16 4.25 16.30 37.36 16.81 19.53
2.56 19.69 42.95 20.71 22.44
74.58 2.56 19.69 42.95 20.71 22.44
4.25 16.30 37.36 16.81 19.53
7.01
8.27
9.70 13.30 20.00
9.70
12.70
12.70
9.45 12.05
12.05
13.30
15.20
15.20
15.67
15.67
20.00
20.30
21.80
8.27 12.05 15.67 27.09
27.09
27.09
9.45 19.63 20.47 31.10
8.27 12.05 15.67 27.09 3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
3.500
3.88
6.75
SK 82 - R 375 Z - 225 S
- 225 M
17.72 8.52
12.40
14.17
2.17
1.30
6.99
20.16
70.57
70.57
2.56 19.69 42.95 20.71 22.44
9.45 12.05
12.05
15.67
15.67
27.09
27.09
- R 400 Z - 250 M 18.58 7.07
15.75 3.54 24.74 74.58
2.56 19.69 42.95 20.71 22.44
9.45 19.63 20.47 31.10
- R 500 Z - 280 S
- 28 0 M
- 315 S
80.26
80.26
84.39
- 0.79 19.69 60.79 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
SK 93 - R 250 Z - 254 TC 21.65 10.67 15.35 2.76 8.81 59.10 9.25 12.44 33.82 12.36 15.59 6.34 9.70 13.30 18.20
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 28 4 TC
- 28 6 TC
21.26 8.89
17.32 1.30 24.33 61.57 8.27 14.09 36.02 13.58 16.50
17.72 4.33 27.87 62.83
63.13
64.63
7.20 16.30 40.31 16.81 19.53
7.01
8.27
9.70 13.30 20.00
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
7/8 x 7/8 x 5-1/2
4.250
4.69
8.50
1 x 1 x 7-1/4
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
69.92
74.33
74.33
7.20 16.30 40.31 16.81 19.53
5.51 19.69 45.91 20.71 22.44
78.34 5.51 19.69 38.90 20.71 22.44
8.27 12.05 15.67 27.09
9.45 12.05
12.05
15.67
15.67
27.09
27.09
9.45 19.63 20.47 31.10
SK 92 - R 375 Z - 225 S
- 225 M
21.65 10.67 15.35
17.32
2.76
1.30
8.81
24.33
74.25
74.25
5.51 19.69 45.91 20.71 22.44
9.45 12.05
12.05
15.67
15.67
27.09
27.09
- R 400 Z - 250 M
21.26
8.89
17.72
4.33 28.42 78.26
5.51 19.69 45.91 20.71 22.44
9.45 16.93 20.47 31.10
- R 500 Z - 280 S
- 28 0 M
- 315 S
83.94
83.94
88.07
2.17 19.69 63.74 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
4.250
4.69
8.50
1 x 1 x 7-1/4
Technical design may be subject to change. DXF files available upon request.
B42 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FLANGE MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ AD BB
BD
GA
O5 QA
AK AH1 BF SA
SK 83 F - R 210 Z - 213 TC
- 215 TC
15.75 17.72
0.20
17.72
1.02
19.92 27.10
- R 250 Z - 254 TC 13.780 6.75 0.71 12.17
77.13
77.13
77.05
77.05
81.06
86.74
86.74
90.87
5.28 19.69 45.67 20.71 22.44
5.28 19.69 45.67 20.71 22.44
5.28 19.69 45.67 20.71 22.44
ZA AB
9.45 12.05
12.05
9.45 12.05
12.05
9.45 16.93 20.47 31.10
1.93 19.69 63.50 35.20 25.24 11.81 17.91
17.91
20.28
FP
15.67
15.67
15.67
15.67
22.64
22.64
25.39
L
27.09
27.09
27.09
27.09
34.06
34.06
38.19
U UY
Key
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 28 4 TC
- 28 6 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 82 F - R 350 Z - 200 L
60.80
62.06
62.36
63.86
73.56
73.56
5.08 14.09 32.83 13.58 16.50 7.01
4.02 16.30 37.13 16.81 19.53
69.15 4.02 16.30 37.13 16.81 19.53
2.32 19.69 42.72 20.71 22.44
77.57 2.32 19.69 42.72 20.71 22.44
8.27
9.70 13.30 20.00
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
8.27 12.05 15.67 27.09
9.45 12.05
12.05
15.67
15.67
27.09
27.09
9.45 19.63 20.47 31.10
15.75
17.72
0.20
17.72
0.71
1.02
19.92
12.17
27.06
71.71 4.02 16.30 37.13 16.81 19.53
8.27 12.05 15.67 27.09 3.500
3.88
6.75
SK 82 F - R 375 Z - 225 S
- 225 M
13.780
6.75
15.75 17.72
0.20
17.72
1.02
19.92 27.69
- R 400 Z - 250 M 13.780 6.75 0.71 12.17
- R 500 Z - 280 S
- 28 0 M
- 315 S
SK 93 F - R 250 Z - 254 TC 15.75 21.65 0.20 1.10
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 28 4 TC
- 28 6 TC
13.780
8.50
0.71 15.12
73.52
73.52
77.53 2.32 19.69 42.72 20.71 22.44
83.21
83.21
87.34
61.90
2.32 19.69 42.72 20.71 22.44
9.45 12.05
9.45 19.63 20.47 31.10
-1.02 19.69 60.55 35.20 25.24 11.81 17.91
9.02 12.44 33.58 12.36 15.59 6.34
30.67 64.37 8.03 14.09 35.79 13.58 16.50 7.01
65.63
65.63
67.43
6.97 16.30 40.08 16.81 19.53 8.27
12.05
17.91
20.28
15.67
15.67
22.64
22.64
25.39
13.30
15.20
15.20
27.09
27.09
34.06
34.06
38.19
9.70 13.30 20.00
9.70
12.70
12.70
20.00
20.30
21.80
7/8 x 7/8 x 5-1/2
3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
9.70 13.30 18.20 4.250
4.69
8.50
1 x 1 x 7-1/4
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 92 F - R 375 Z - 225 S
- 225 M
15.75
21.65
0.20
17.72
1.10
24.09 31.22
- R 400 Z - 250 M 13.780 8.50 0.71 15.12
- R 500 Z - 280 S
- 28 0 M
- 315 S
C DB2 EC HF LE RA
53.09
54.19
7.05 10.63 27.60 10.31 13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
3.500
3.88
6.75
58.33
6.06 12.44 30.63 12.36 15.59 6.34
9.70 13.30 18.20
7/8 x 7/8 x 5-1/2
72.72 6.97 16.30 40.08 16.81 19.53
8.27 12.05 15.67 27.09
81.14 5.28 19.69 45.67 20.71 22.44 9.45 19.63 20.47 31.10
4.250
4.69
1 x 1 x 7-1/4
V
8.50
Technical design may be subject to change. DXF files available upon request.
www.nord.com
B43
VARIABLE SPEED HELICAL GEARED MOTORS
Z - DESIGN, FOOT MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A BA D G N U UY V
B BJ
E
F
H
J
O5
QA
C DB2 EC HF LE RA ZA AB FP L
Key
SK 103 - R 280 Z - 256 TC 23.62 12.76 17.72 3.15 10.39 65.94 10.63 14.09 38.39 13.58 16.50 7.01 9.70 13.30 20.00 5.250 5.80 10.0
- R 300 Z - 256 TC
- 28 4 TC
- 28 6 TC
24.61 10.39
18.90
19.88
1.77
4.72
27.80
32.24
69.08
70.10
71.60
9.57 16.30 42.68 16.81 19.53 8.27
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
1-1/4x 1-1/4x 8-3/8
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
76.89
78.07
78.07
9.57 16.30 42.68 16.81 19.53 8.27
7.87 19.69 48.27 20.71 22.44 9.45
82.08 7.87 19.69 48.27 20.71 22.44
9.45
12.05 15.67 27.09
12.05
12.05
15.67
15.67
27.09
27.09
16.93 20.47 31.10
- R 500 Z - 280 S
- 28 0 M
- 315 S
87.76
87.76
91.89
4.53 19.69 66.10 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
SK 102 - R 400 Z - 250 M 23.62 12.76 17.72 3.15
10.39 81.73 7.87 19.69 48.27 20.71 22.44 9.45
16.93 20.47 31.10 5.250
5.80 10.0
- R 500 U - 280 S
- 28 0 M
- 315 S
24.61 10.39
18.90
19.88
1.77
4.72
27.80
31.89
87.41
87.41
91.54
4.53 19.69 66.10 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
1-1/4x 1-1/4x 8-3/8
B44
Technical design may be subject to change. DXF files available upon request.
www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
U - DESIGN, FLANGE MOUNTED, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions
Type
AJ AD BB
BD
GA
O5
AK AH1 BF SA
SK 103 F - R 280 Z - 256 TC 19.68 23.62 0.20 1.26
- R 300 Z - 256 TC
- 28 4 TC
- 28 6 TC
17.717 10.00
21.65
0.71
27.48
17.40
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
- R 500 Z - 280 S
- 28 0 M
- 315 S
SK 102 F - R 400 Z - 250 M 19.68 23.62 0.20
1.26
- R 500 Z - 280 S
- 28 0 M
- 315 S
17.717 10.00
21.65
0.71
27.48
17.40
QA C
Motor dimensions
AB FP
69.29 10.31 14.09 38.07 13.58 16.50 7.01
9.70 13.30 20.00 5.250 5.80 10.0
35.59 73.15
73.45
74.95
80.24
81.42
81.42
85.43
91.11
91.11
95.24
7.56 19.69 47.95 20.71 22.44
4.21 19.69 65.79 20.71 22.44
4.21 19.69 65.79 35.20 25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
L
9.45 16.93 20.47 31.10
9.45 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
85.08 7.56 19.69 47.95 20.71 22.44
9.45 16.93 20.47 31.10
5.250 5.80 10.0
35.24 90.76
90.76
94.89
Outline dimensions
DB2 EC HF LE RA
9.25 16.30 42.36 16.81 19.53 8.27
9.25 16.30 42.36 16.81 19.53
7.56 19.69 47.95 20.71 22.44
ZA
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
8.27 12.05 15.67 27.09
9.45 12.05
12.05
15.67
15.67
27.09
27.09
34.06
34.06
38.19
Shaft dimensions
U UY
Key
V
1-1/4x 1-1/4 x 8-3/8
1-1/4x 1-1/4 x 8-3/8 www.nord.com
Technical design may be subject to change. DXF files available upon request.
B45
NOTES
B46 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEAR UNITS www.nord.com
C1
VARIABLE SPEED HELICAL SHAFT MOUNTING GEAR UNITS
NOMENCLATURE
SHAFT MOUNTED , HOLLOW SHAFT
SK 1282 A - SK 9282 A =
SK 6382 A - SK 9382 A =
GEAR TYPE
Helical Shaft Mounting Gearboxes, double reduction
Helical Shaft Mounting Gearboxes, triple reduction
SHAFT MOUNTED , SOLID SHAFT
SK 1282 V - SK 9282 V = Helical Shaft Mounting Gearboxes, double reduction
SK 6382 V - SK 9382 V = Helical Shaft Mounting Gearboxes, triple reduction
VARIABLE SPEED TYPE
R 100 U
R 150 U
R 196 U
R 210 U
R 250 U
R 280 U Variable speed drives U design
R 300 U
R 350 U
R 375 U
R 400 U
R 500 U
HELICAL SHAFT MOUNTED GEAR UNITS - OPTIONS
R 100 Z
R 150 Z
R 196 Z
R 210 Z
R 250 Z
R 280 Z Variable speed drives Z design
R 300 Z
R 350 Z
R 375 Z
R 400 Z
R 500 Z see catalog 1000
STANDARD TYPE
Variable speed helical shaft mounting geared motor
U - design (affix: U), with control gear type ZV
Variable speed helical shaft mounting geared motor
Z - design (affix: Z), with control gear type ZV
C2 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEAR UNITS
NOMENCLATURE
SPEED CONTROLS MOTOR
=
WST =
Speed control ZV
Angular control
EMFST= Electromechanical remote control
SPEED INDICATORS
BLA = Non contacting speed indicator, analogue
BLD = Non contacting speed indicator, digital
FAA = EMFST with remote speed indicator, analogue
FAD = EMFST with remote speed indicator, digital
C - face
1/3 - 30 HP
56 C - 286 TC
IEC
40 - 150 HP
200 L/4 - 315 S/4
MOTOR OPTIONS
BRE = with brake
DG = Incremental encoder
HL = Brake motor with hand release
R = Backstop
RG = Brake corrosion-protected
SR = Brake dust-proof
TF = Thermistor
TW = Thermal trip
WE = 2 nd motor shaft end
EXAMPLE FOR ORDERING:
SK 7382 A - R 210 U - 213 TC
C - face motor / three phase 7.5 HP
Variable speed gear type, design U
Helical Shaft Mounting Gear Motor, 3 reductions wwww.nord.com
C3
VARIABLE SPEED HELICAL SHAFT MOUNTING GEAR UNITS
MOUNTING POSITIONS
Z
Horizontal position
U
SK 1282 - SK 5282
SK 6282 - SK 9382
In all mounting positions the variable speed drive may be mounted at an angle of 90
0
.
affix: */1 = right , */2 = left
1
I
I
H 1/1 U
1
U
Z
Z U
H 1 U (Z)
SK 6282 - SK 9382
H 2 U (Z)
SK 6382 - SK 9382
U
SK 1282 - SK 5282
SK 6282 - SK 9382
SK 6282 - SK 9282
SK 1282 - SK 5282
SK 6382 - SK 9382
SK 1282 - SK 5282
Z
H 3 U (Z) H 4 U (Z)
1
H 1/2 U
I
H 1 U
POSITION OF TERMINAL BOX AND CABLE ENTRY
Please specify position of terminal box and cable entry !
Normal design:
1/3 - 30 HP, Terminal Box at 3. Cable entry at I or III only.
40 - 150 HP , Terminal Box at 1. Cable entry at I.
If other position are required, please specify exactly when ordering.
Vertical position
Z
U
IV
III
II
I I
1
I 2
I
3
U
Symbols:
H 5 U (Z)
Vent plug Drain plug
Z
Oil level
H 6 U (Z)
Rubber buffer
C4 www.nord.com
NOTES www.nord.com
C5
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
6.1
7.4
7.6
9.4
11.1
12.1
14.3
17
21
26
29
6.9
7.6
8.7
9.7
10.9
11.7
13.8
7.0
8.3
9.5
10.7
11.6
6.9
7.6
8.7
9.7
10.9
6.1
7.4
7.6
9.4
11.1
12.1
14.3
17
21
27
31
38
45
16
17
19
24
7.0
8.3
9.5
10.7
11.6
13.1
13.9
94
107
120
141
55
66
75
84
161
470
396
332
273
218
197
938
766
743
606
512
826
742
653
587
519
485
411
805
681
597
531
487
619
505
490
400
338
310
262
219
181
545
489
431
388
342
532
449
394
350
321
286
269
239
224
199
156
137
122
100
83.2
68.1
57.5
50.4
44.3
39.8
35.4
31.0
26.6
23.0
0.50
34
38
43
48
55
59
69
60
71
86
104
130
144
30
37
38
47
55
35
42
48
53
58
0.33
34
38
43
48
55
60
71
86
104
30
37
38
47
55
78
84
94
120
136
153
188
224
35
42
48
53
58
65
70
273
328
373
420
468
533
600
705
805
8.1
10.8
12.0
14.0
17.6
15.7
3.3
4.6
4.2
6.3
7.7
7.9
9.6
10.0
12.4
9.6
13.8
13.8
2.3
2.9
3.3
3.8
4.9
3089
3513
3089
3036
2567
2345
1982
1655
1372
1089
982
4124
3708
3266
2929
2593
2425
2053
1850
1965
1991
1991
2390
12.0
14.6
15.2
18.8
14.6
5.0
7.0
6.3
9.6
11.6
12.3
16.3
18.2
21.2
9.6
7.7
9.6
12.8
14.5
16.3
19.9
23.8
3.5
4.4
5.1
5.7
7.4
8.4
7.7
27.3
31.4
34.4
37.8
42.4
46.8
51.7
57.3
46.5
2726
2451
2151
1938
1717
3089
2522
2451
2000
1690
1549
1310
1097
903
1195
1124
1000
779
688
612
499
418
1850
1965
1974
1752
1611
1434
1345
342
286
251
223
200
176
156
133
116
1.0
1.4
1.3
1.9
2.3
2.5
3.3
3.6
4.2
2.4
2.9
3.0
3.8
2.9
1.9
1.5
1.9
2.6
2.9
3.3
4.0
4.7
1.0
1.0
1.0
1.1
1.5
1.7
1.5
5.4
6.3
6.9
7.5
8.5
9.4
10.3
11.5
9.2
1.6
2.2
2.4
2.8
3.5
3.1
1.0
1.0
1.0
1.3
1.5
1.6
1.9
2.0
2.5
1.9
2.8
2.8
1.0
1.0
1.0
1.0
1.0
112.23
100.88
88.74
79.76
70.56
127.51
104.07
100.98
82.42
69.67
63.83
53.96
45.11
37.18
109.50
92.48
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
7.24
6.43
5.47
4.79
SK 3282 - R100 Z - 56 C
SK 2282 - R100 Z - 56 C
SK 1282 - R100 U/Z - 56 C
112.23
100.88
88.74
79.76
70.56
65.89
55.79
127.51
104.07
100.98
82.42
69.67
63.83
53.96
45.11
37.18
29.65
26.83
109.50
92.48
81.17
72.17
66.23
SK 3282 - R100 Z - 56 C
SK 2282 - R100 Z - 56 C
SK 1282 - R100 U/Z - 56 C
Weight approx.
[Lbs]
(460 V)
I
N
[A] i
Regel
143
110
77
143
110
77
0.8
0.8
0.8
1.1
1.1
1.1
5.00
5.00
5.00
5.00
5.00
5.00
C6 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
21
26
29
31
32
35
42
6.1
7.4
7.6
9.4
11.1
12.1
14.3
17
6.9
7.6
8.7
9.7
10.9
11.7
13.8
16
18
20
24
27
31
38
45
16
17
19
24
55
66
7.0
8.3
9.5
10.7
11.6
13.1
13.9
0.75
34
38
43
48
55
59
69
80
92
102
121
78
84
94
120
136
153
188
224
273
328
35
42
48
53
58
65
70
104
130
144
154
161
176
208
55
60
71
86
30
37
38
47
0.50
65
224
273
328
373
420
468
533
600
705
805
120
136
153
188
70
78
84
94
84
94
107
120
141
161
45
55
66
75
24
27
31
38
13.1
13.9
16
17
19
433
407
362
340
302
236
208
186
151
127
104
86.7
76.1
67.3
60.2
53.1
46.9
39.8
35.4
9.3
11.7
10.4
13.9
11.7
15.8
21.0
5.1
5.4
7.2
8.0
2.2
3.1
2.8
4.2
6.4
9.2
9.2
9.2
5.3
6.4
6.6
8.3
14.0
17.5
18.5
6.4
7.2
8.8
10.4
4.2
3.4
4.2
5.6
11.9
13.9
1.5
1.9
2.2
2.5
3.3
3.7
3.4
2053
1637
1478
1381
1319
1212
1018
3089
3513
3089
3823
3841
3522
2974
2487
6195
5567
4894
4398
3894
3637
3080
2646
2319
2080
1761
2301
1735
1920
1770
1566
1389
1133
947
779
649
1850
1965
1991
1991
2390
2398
2080
411
327
296
275
265
242
204
1407
1151
1115
912
769
704
596
497
1239
1115
982
880
779
727
616
530
464
417
352
543
510
453
354
312
278
227
190
156
130
1212
1018
894
797
731
650
612
8.4
9.6
10.7
13.2
15.7
17.9
20.8
22.8
5.5
5.1
6.4
5.1
6.4
24.9
28.1
31.2
34.2
38.2
30.2
2168
2036
1814
1699
1513
1177
1044
929
757
633
519
433
381
337
303
266
236
201
176
1.7
1.9
2.1
2.6
3.1
3.6
4.2
4.6
1.1
1.0
1.3
1.0
1.3
5.0
5.6
6.2
6.8
7.6
6.1
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
7.24
6.43
5.47
4.79
SK 1282 - R100 U/Z - 56 C
1.9
2.3
2.1
2.8
2.3
3.2
4.2
1.0
1.0
1.0
1.0
1.0
1.1
1.4
1.6
1.1
1.3
1.3
1.7
1.3
1.8
1.8
1.8
2.8
3.5
3.7
1.0
1.0
1.0
1.1
1.3
1.4
1.8
2.1
2.4
2.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
127.51
104.07
100.98
82.42
69.67
63.83
53.96
45.11
37.18
29.65
26.83
24.97
23.96
21.90
18.51
112.23
100.88
88.74
79.76
70.56
65.89
55.79
48.04
42.02
37.77
31.93
109.50
92.48
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
SK 3282 - R100 Z - 56 C
SK 2282 - R100 Z - 56 C
SK 1282 - R100 U/Z - 56 C
Weight approx.
[Lbs]
(460 V)
I
N
[A] i
Regel
77
143
110
77
1.1
1.6
1.6
1.6
5.00
5.00
5.00
5.00
www.nord.com
C7
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
75
84
94
107
120
141
161
29
31
32
35
14.3
17
21
26
42
47
6.1
7.4
7.6
9.4
11.1
12.1
18
20
24
27
30
6.9
7.6
8.7
9.7
10.9
11.7
13.8
16
107
120
141
161
38
45
55
66
75
84
94
7.0
8.3
9.5
10.7
11.6
19
24
27
31
13.1
13.9
16
17
114
101
91.2
79.7
70.8
60.2
53.1
1876
1531
1487
1212
1027
938
794
664
547
436
395
367
352
322
273
243
1655
1487
1310
1177
1035
974
820
707
619
556
470
422
381
303
253
208
173
152
135
121
106
94.7
80.5
70.8
1611
1363
1195
1062
974
866
815
725
680
604
472
417
371
0.75
373
420
468
533
600
705
805
1.00
34
38
43
48
92
102
121
134
55
59
69
80
149
188
224
273
328
373
420
468
533
600
705
805
94
120
136
153
65
70
78
84
35
42
48
53
58
71
86
104
130
144
154
161
176
208
233
30
37
38
47
55
60
Weight approx.
[Lbs]
(460 V)
I
N
[A]
571
506
455
399
355
302
265
15.2
16.6
18.5
20.8
22.6
25.3
20.2
7.8
10.4
8.8
11.9
5.4
6.0
7.0
8.8
15.8
17.1
1.6
2.3
2.1
3.2
3.8
4.1
10.5
13.1
13.9
17.2
19.1
4.8
6.9
6.9
6.9
3.9
4.8
5.0
6.2
6.6
7.8
8.9
10.5
11.4
12.4
13.9
15.6
16.9
18.9
15.1
3.2
4.2
4.8
5.4
2.8
2.6
3.2
2.6
1.1
1.4
1.7
1.9
2.5
3089
3513
3089
3823
3921
3823
3602
3018
2487
1982
1797
1673
1602
1460
1239
1106
6522
6744
5930
5328
4717
4407
3726
3213
2805
2522
2133
1920
1726
1372
1151
947
786
691
613
550
484
430
366
320
1850
1965
1991
1991
2390
2398
2080
2301
1735
1920
1991
1894
1682
3.0
3.3
3.7
4.1
4.5
5.0
4.0
10.34
9.18
8.24
7.24
6.43
5.47
4.79
SK 1282 - R100 U/Z - 56 C 77
1.2
1.3
1.5
1.9
1.7
2.3
1.9
2.6
3.5
3.8
1.0
1.0
1.0
1.0
1.0
1.0
2.3
2.9
3.1
3.8
4.2
1.0
1.1
1.1
1.4
1.1
1.5
1.5
1.5
1.5
1.7
2.0
2.3
2.5
2.7
3.1
3.4
3.7
4.2
3.3
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.0
1.0
1.0
1.0
1.0
127.51
104.07
100.98
82.42
69.67
63.83
53.96
45.11
37.18
29.65
26.83
24.97
23.96
21.90
18.51
16.53
112.23
100.88
88.74
79.76
70.56
65.89
55.79
48.04
42.02
37.77
31.93
28.70
25.88
20.57
17.21
14.11
11.76
10.34
9.18
8.24
7.24
6.43
5.47
4.79
109.50
92.48
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
SK 3282 - R100 Z - 143 TC
SK 2282 - R100 Z - 143 TC
SK 1282 - R100 U/Z - 143 TC
157
123
90
1.6
2.1
2.1
2.1
i
Regel
5.00
5.00
5.00
5.00
C8 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
26
29
30
32
34
16
18
21
24
12.1
12.8
14.1
15.0
6.0
6.7
7.6
8.5
9.6
10.3
10.6
14.3
17
21
26
29
31
32
6.1
7.4
7.6
9.4
11.1
12.1
35
42
47
6.9
7.6
8.7
9.7
10.9
20
24
27
30
11.7
13.8
16
18
5.3
6.5
6.7
8.2
9.7
10.6
12.5
13.1
15.0
19
22
23
1168
1106
1009
938
881
792
669
602
2354
2115
1859
1673
1478
1381
1345
543
497
471
449
423
2814
2292
2230
1823
1540
1407
1195
991
820
654
592
551
528
483
409
365
2478
2230
1956
1761
1558
1451
1230
1062
929
834
704
634
571
2673
2186
2115
1726
1460
1336
1133
1089
920
766
655
621
1.50
34
102
121
134
149
59
69
80
92
38
43
48
55
97
107
127
141
73
77
85
91
36
40
46
51
58
62
63
157
171
181
190
201
71
86
104
130
144
154
161
30
37
38
47
55
60
176
208
233
93
111
130
137
58
64
75
79
32
39
40
49
7.4
9.2
9.7
12.1
4.9
6.8
4.8
7.0
2.8
3.4
3.5
4.3
3.4
4.9
5.4
13.4
14.3
13.9
14.2
17.2
3.6
4.0
4.7
5.8
5.2
6.9
5.8
1.1
1.5
1.4
2.1
2.5
2.7
7.9
10.5
11.4
8.7
9.3
11.5
12.7
4.6
4.6
4.6
7.0
2.6
3.2
3.3
4.1
3.2
2.7
2.9
3.8
3.5
1.2
1.6
1.5
2.2
4.7
5.4
6.0
6.2
5682
6354
4885
5381
5036
4531
3832
3443
6522
7142
6531
7275
4991
6708
7275
3106
2841
2690
2567
2416
3089
3513
3089
3823
3921
3823
3602
3018
2487
1982
1797
1673
1602
1460
1239
1106
6522
6744
5930
5328
4717
4407
3726
3213
2805
2522
2133
1920
1726
3089
3513
3089
3823
3921
3823
4275
3823
4301
4115
3744
3558
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.0
1.2
1.0
1.2
1.3
1.6
1.7
2.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.3
2.5
2.4
2.5
3.0
1.2
1.3
1.5
1.9
1.7
2.3
1.9
1.0
1.0
1.0
1.0
1.0
1.0
2.6
3.5
3.8
1.5
1.5
1.5
2.3
2.9
3.1
3.8
4.2
1.0
1.1
1.1
1.4
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.1
112.23
100.88
88.74
79.76
70.56
65.89
64.12
55.79
52.97
48.04
44.85
42.02
37.77
31.93
28.70
25.88
23.71
22.45
21.38
20.18
127.51
104.07
100.98
82.42
69.67
63.83
53.96
45.11
37.18
29.65
26.83
24.97
23.96
21.90
18.51
16.53
112.23
100.88
88.74
79.76
70.56
65.89
55.79
48.04
42.02
37.77
31.93
28.70
25.88
127.51
104.07
100.98
82.42
69.67
63.83
53.96
51.71
43.71
36.54
31.23
29.65
SK 3282 - R100 Z - 145 TC
SK 3282 - R150 U/Z - 145 TC
SK 2282 - R100 Z - 145 TC
SK 2282 - R150 U/Z - 145 TC
157
172
123
139
3.0
3.0
3.0
3.0
i
Regel
5.00
6.00
5.00
6.00
www.nord.com
C9
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
31
38
45
55
17
19
24
27
9.5
10.7
11.6
13.1
13.9
16
107
120
141
161
66
75
84
94
25
27
28
31
37
41
26
29
30
32
34
12.8
14.1
15.0
16
18
21
24
6.0
6.7
7.6
8.5
9.6
10.3
10.6
12.1
13.8
16
18
20
24
27
30
6.9
7.6
8.7
9.7
10.9
11.7
1788
1593
1460
1301
1221
1089
1018
903
708
625
557
454
380
312
259
228
203
181
160
142
120
105
563
524
503
459
389
347
1478
1345
1257
1177
1053
894
803
3142
2823
2478
2230
1974
1841
1797
1558
724
663
627
597
564
3301
2965
2611
2345
2080
1938
1637
1416
1239
1115
938
844
761
1.50
151
163
169
185
219
246
84
94
120
136
153
188
224
273
48
53
58
65
70
78
328
373
420
468
533
600
705
805
2.00
34
38
69
80
92
102
43
48
55
59
121
134
149
77
85
91
97
107
127
141
58
62
63
73
36
40
46
51
157
171
181
190
201
Weight approx.
[Lbs]
(460 V)
I
N
[A]
3.6
4.4
5.2
6.0
1.7
2.1
2.8
3.2
1.1
1.2
1.6
1.8
1.7
2.1
10.3
11.3
12.6
10.2
7.0
7.6
8.3
9.3
5.5
7.3
6.1
8.3
11.1
12.0
3089
2991
2876
2628
2221
1982
1991
1991
2390
2398
2080
2301
1735
1920
1991
1894
1682
1372
1151
947
786
691
613
550
484
430
366
320
10.0
10.7
10.4
10.7
12.9
5.1
3.6
5.2
5.5
6.9
7.3
9.1
2.5
3.6
4.0
3.6
2.1
2.5
2.6
3.3
3.5
3.5
5.3
6.5
7.0
8.6
9.6
2.0
2.4
2.5
3.1
2.4
3.5
6354
4885
5381
5036
4531
3832
3443
6522
7142
6531
7275
4991
6708
7275
5682
3106
2841
2690
2567
2416
6522
6744
5930
5328
4717
4407
3726
3213
2805
2522
2133
1920
1726
1.0
1.0
1.0
1.1
1.2
1.5
1.7
2.0
1.0
1.0
1.0
1.0
1.0
1.0
2.3
2.5
2.7
3.1
3.4
3.7
4.2
3.3
1.0
1.3
1.1
1.5
1.9
2.1
26.83
24.97
23.96
21.90
18.51
16.53
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
7.24
6.43
5.47
4.79
SK 2282 - R150 U/Z - 145 TC
SK 1282 - R100 U/Z - 145 TC
139
90
1.2
1.0
1.2
1.3
1.6
1.7
2.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.3
2.5
2.4
2.5
3.0
1.5
1.5
2.3
2.9
3.1
3.8
4.2
1.0
1.1
1.1
1.4
1.1
1.5
112.23
100.88
88.74
79.76
70.56
65.89
64.12
55.79
52.97
48.04
44.85
42.02
37.77
31.93
28.70
25.88
23.71
22.45
21.38
20.18
112.23
100.88
88.74
79.76
70.56
65.89
55.79
48.04
42.02
37.77
31.93
28.70
25.88
SK 3282 - R100 Z - 145 TC
SK 3282 - R150 U/Z - 145 TC
157
172
3.0
3.0
3.4
3.4
i
Regel
6.00
5.00
5.00
6.00
C10 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
23
25
27
28
13.1
15.0
19
22
6.5
6.7
8.2
9.7
10.6
12.5
31
37
41
31
32
35
42
17
21
26
29
47
7.4
9.4
11.1
12.1
14.3
94
107
120
141
161
31
38
45
55
66
75
84
17
19
24
27
11.6
13.1
13.9
16
2.7
3.0
3.2
3.9
4.2
1.2
1.5
1.7
2.1
2.5
2912
2823
2301
1947
1788
1505
1443
1221
1018
873
829
750
698
670
612
518
462
3062
2425
2053
1876
1584
1328
1097
873
789
735
705
644
544
487
742
605
506
415
346
304
270
1947
1735
1628
1451
1363
1212
947
834
242
213
189
161
141
23134
18665
16488
13302
11222
10558
9470
8903
7186
6708
2.00
37
154
161
176
208
233
86
104
130
144
47
55
60
71
79
93
111
130
137
151
163
169
39
40
49
58
64
75
185
219
246
153
188
224
273
328
373
420
84
94
120
136
58
65
70
78
468
533
600
705
805
3.00
7.4
9.1
10.3
12.8
15.0
16
18
19
24
25
4.6
4.1
5.5
4.6
2.7
3.5
4.0
4.5
1.2
1.1
1.7
2.0
2.1
2.8
6.2
8.3
9.0
5.2
4.4
5.9
7.9
3.0
3.5
4.4
3.9
8.6
1.1
1.6
1.9
2.0
2.7
2.7
3.3
3.9
4.5
5.2
5.7
6.2
1.3
1.6
2.1
2.4
1.2
1.4
1.3
1.6
7.0
7.8
8.5
9.5
7.6
3513
3089
3823
3921
3823
4275
3823
4301
4115
3744
3558
3089
2991
2876
2628
2221
1982
3513
3823
3921
3823
3602
3018
2487
1982
1797
1673
1602
1460
1239
1106
1682
1372
1151
947
786
691
613
2390
2398
2080
2301
1735
1920
1991
1894
550
484
430
366
320
45755
36905
47153
38046
32090
30187
27072
25461
20550
19169
3.8
3.8
4.6
6.9
7.6
2.0
2.0
3.2
3.8
4.6
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.0
1.0
1.0
1.1
1.1
1.0
1.3
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.9
2.1
1.3
1.5
1.9
1.7
2.3
1.9
2.6
3.5
3.8
1.0
1.0
1.0
1.0
1.2
1.2
1.5
1.7
2.0
2.3
2.5
2.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
3.1
3.4
3.7
4.2
3.3
1.3
1.3
1.6
2.4
2.7
1.0
1.0
1.1
1.3
1.6
104.07
100.98
82.42
69.67
63.83
53.96
51.71
43.71
36.54
31.23
29.65
26.83
24.97
23.96
21.90
18.51
16.53
104.07
82.42
69.67
63.83
53.96
45.11
37.18
29.65
26.83
24.97
23.96
21.90
18.51
16.53
66.23
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
7.24
6.43
5.47
4.79
SK 2282 - R100 Z - 145 TC
SK 2282 - R150 U/Z - 145 TC
SK 1282 - R100 U/Z - 145 TC
123
139
90
551.58
445.09
393.19
317.28
267.59
251.76
225.79
212.33
171.34
159.88
SK 6382 - R150 Z - 145 TC 505
3.4
3.4
3.4
4.8
i
Regel
5.00
6.00
5.00
6.00
www.nord.com
C11
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
4.4
6.1
7.5
9.0
11.0
13.0
15.0
16
17
18
19
21
11.8
12.9
14.5
14.9
17
18
4.6
6.1
6.6
7.5
8.9
10.9
2.9
3.6
6.6
8.1
8.3
10.2
1.1
1.4
1.6
1.9
2.3
2.4
2.7
5.0
6.8
7.4
8.3
9.9
12.1
3.9
5.5
6.7
8.1
9.9
11.7
13.5
14.0
15.0
16
17
19
5.3
5.9
7.3
9.0
9.2
5319
4814
3885
3151
3080
6514
4646
3797
3159
2584
2186
1885
1832
1708
1611
1522
1345
6239
4664
4275
3797
3195
2602
2398
2195
1947
1894
1646
1558
25656
20709
18293
14762
12452
11709
10505
9877
7974
4310
3496
3416
2779
5620
4204
3850
3425
2876
2345
7230
5151
4213
3505
2867
2425
2097
2027
1894
1779
1699
1487
3.00
32
35
44
54
55
78
90
93
100
106
112
127
26
37
45
54
66
71
77
87
90
103
109
27
37
40
45
53
65
17
21
40
49
50
61
6.6
8.2
9.3
11.5
13.7
14.5
16
30
41
44
50
59
73
84
90
96
101
114
24
33
40
49
59
70
81
Weight approx.
[Lbs]
(460 V)
I
N
[A]
7.6
10.8
13.7
16.9
16.0
6.6
5.8
7.4
6.4
8.9
7.4
11.4
1.7
2.4
3.4
3.5
5.1
9.5
8.3
13.0
10.0
13.0
11.6
3.0
4.3
4.4
4.3
7.1
8.3
4.2
6.2
12.3
15.2
14.4
17.5
1.8
1.8
2.8
3.4
4.2
3.4
3.4
3.4
4.7
4.9
4.7
7.9
9.2
6.7
5.8
8.1
6.7
10.3
1.5
2.1
3.1
3.1
4.6
5.9
5.2
15213
13762
11107
9018
8815
10965
10965
10859
9045
7390
6257
5399
5230
4885
4593
4363
3841
18992
18328
16797
14930
12558
10222
9416
8646
7673
7461
6487
6115
45755
36905
52038
49914
48949
39648
35577
38843
31347
16948
13753
13443
10912
16072
12018
11009
9788
8231
6699
10965
10965
13063
10974
11266
9549
8239
7983
7452
7009
6655
5859
2.3
2.0
2.6
2.2
3.1
2.6
4.0
1.0
1.0
1.2
1.2
1.8
2.4
2.1
3.3
2.5
3.3
2.9
1.0
1.1
1.1
1.1
1.8
2.1
1.1
1.6
3.1
3.9
3.7
4.5
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.2
1.7
1.7
1.7
2.8
3.2
2.7
3.8
4.8
5.9
5.6
1.7
1.5
2.1
1.7
2.6
1.0
1.0
1.0
1.0
1.2
1.5
1.3
126.87
114.79
92.63
75.18
73.50
155.40
110.78
90.52
75.39
61.60
52.20
45.05
43.65
40.74
38.31
36.40
32.04
134.03
100.19
91.81
81.61
68.63
55.90
51.49
47.27
41.94
40.80
35.46
33.43
551.58
445.09
393.19
317.28
267.59
251.76
225.79
212.33
171.34
92.63
75.18
73.50
59.66
134.03
100.19
91.81
81.61
68.63
55.90
155.40
110.78
90.52
75.39
61.60
52.20
45.05
43.65
40.74
38.31
36.40
32.04
SK 6382 - R150 Z - 145 TC
SK 6382 - R196 U/Z - 182 TC
SK 5282 - R150 Z - 145 TC
SK 5282 - R196 U/Z - 182 TC
SK 4282 - R150 Z - 145 TC
SK 4282 - R196 U/Z - 182 TC
505
520
326
342
247
262
4.8
4.8
4.8
4.8
4.8
4.8
i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
C12 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
4.2
5.5
6.0
6.5
3.1
2.7
3.7
3.1
1.8
2.3
2.7
3.0
1.1
1.3
1.4
1.9
6.9
7.4
7.8
6.4
6.9
4.0
4.3
4.9
5.5
2.3
2.7
3.1
3.7
1.1
1.1
1.5
1.7
1.9
5.9
6.6
5.3
2.4
3.5
3.7
4.6
2.4
2.7
2.4
3.4
1.4
1.7
1.8
2.2
1.7
4.9
6.0
6.7
7.2
7.0
7.1
8.6
3558
3089
2991
2876
2628
2221
1982
1584
3823
3921
3823
4275
3823
4301
4115
3744
1416
1221
1080
1000
894
2301
1920
1991
1991
1991
1991
1982
1690
1407
1239
1097
991
868
771
656
574
6522
7142
6531
7275
4991
6708
7275
5682
6354
4885
5381
5036
4531
3832
3443
3106
2841
2690
2567
2416
57
67
75
81
90
31
37
41
51
23
25
27
28
8.2
9.7
10.6
12.5
13.1
15.0
19
22
65
74
82
93
33
39
48
58
13.7
16
21
24
27
105
124
141
10.3
10.6
12.1
12.8
14.1
15.0
16
18
6.0
6.7
7.6
8.5
9.6
21
24
26
29
30
32
34
1.6
1.9
3.0
1239
1124
1044
1009
920
776
693
555
3460
2921
2673
2266
2168
1832
1531
1310
496
426
379
351
313
2062
1726
1345
1186
1053
863
721
592
493
434
385
345
304
270
229
201
4708
4230
3717
3345
2956
2761
2690
2336
2221
2018
1885
1761
1584
1336
1204
1089
991
938
894
846
137
151
163
169
185
219
246
307
79
93
111
130
49
58
64
75
344
400
450
485
543
197
236
288
345
393
442
493
561
82
99
127
143
161
631
742
848
3.00
36
85
91
97
107
127
141
157
171
62
63
73
77
40
46
51
58
181
190
201
5.00
9.5
11.5
18
29984
24683
15585
70738
58224
36772
3.7
4.7
6.1
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.1
1.0
1.3
1.1
1.5
1.9
2.1
2.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
2.4
2.6
2.7
2.3
2.4
1.0
1.0
1.1
1.3
1.4
1.5
1.7
1.9
1.0
1.0
1.0
1.0
1.0
2.1
2.3
1.9
1.0
1.0
1.0
1.2
1.0
1.2
1.3
1.6
1.0
1.0
1.0
1.0
1.0
1.7
2.1
2.3
2.5
2.4
2.5
3.0
29.65
26.83
24.97
23.96
21.90
18.51
16.53
13.23
82.42
69.67
63.83
53.96
51.71
43.71
36.54
31.23
11.81
10.15
9.03
8.37
7.48
49.25
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
7.24
6.43
5.47
4.79
112.23
100.88
88.74
79.76
70.56
65.89
64.12
55.79
52.97
48.04
44.85
42.02
37.77
31.93
28.70
25.88
23.71
22.45
21.38
20.18
SK 3282 - R150 U/Z - 145 TC
SK 2282 - R150 U/Z - 145 TC
SK 1282 - R150 U/Z - 145 TC
201
168
143
1.6
2.0
2.6
386.68
318.31
201.00
SK 8382 - R196 Z - 184 TC 972
4.8
4.8
4.8
7.6
i
Regel
6.00
6.00
6.00
6.00
www.nord.com
C13
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
13.6
14.5
16
19
21
24
26
27
7.6
9.3
9.5
10.9
11.5
12.7
5.5
6.7
8.1
9.9
11.7
17
19
23
27
13.5
14.0
15.0
16
28
11.8
12.9
14.5
14.9
17
18
4.6
6.1
6.6
7.5
8.9
10.9
2.9
3.6
3.8
4.8
5.3
6.6
8.1
8.3
10.2
1.1
1.4
1.6
1.9
2.3
2.4
2.7
1.8
2.2
2.8
4.1
4.9
26267
21213
16780
11673
9567
6186
5106
4974
4328
4106
3726
3478
3257
2929
2478
2221
2009
1841
1743
8593
7018
5850
4779
4044
3496
3381
3159
2974
2823
2487
2053
1735
1664
10390
7770
7115
6328
5319
4337
3991
3664
3248
3159
2752
2593
42763
34506
30488
24603
20744
19523
17505
16461
13284
12399
9841
8903
7186
5832
5699
4629
5.00
10.8
13.4
17
24
30
82
87
97
115
128
141
154
163
46
56
57
66
69
76
101
114
138
163
81
84
90
96
171
33
40
49
59
70
71
77
87
90
103
109
27
37
40
45
53
65
32
40
49
50
17
21
23
29
61
6.6
8.2
9.3
11.5
13.7
14.5
16
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.9
2.0
2.5
2.6
3.3
3.6
3.9
3.7
1.2
1.3
1.5
1.3
1.8
1.3
4.0
6.2
6.4
8.3
3.1
4.0
3.5
4.8
7.9
1.3
1.9
1.9
2.7
3.6
5.7
5.0
7.8
6.0
7.8
7.0
1.8
2.6
2.7
2.6
4.3
5.0
5.8
7.4
9.1
8.6
2.5
3.7
4.1
4.1
10.5
1.1
1.1
1.7
2.0
2.5
2.0
2.0
2.5
3.1
4.4
5.7
7.0
61977
50047
39595
27541
22568
7275
6708
7275
5682
7478
4885
6522
6514
6912
5841
5248
4735
4337
4106
10965
13063
10974
11266
9549
8239
7983
7452
7009
6655
5859
4832
4098
3921
18992
18328
16797
14930
12558
10222
9416
8646
7673
7461
6487
6115
45755
36905
52038
49914
48949
39648
35577
38843
31347
29249
23205
21001
16948
13753
13443
10912
1.0
1.0
1.1
1.1
1.4
1.5
1.6
1.6
1.0
1.0
1.0
1.0
1.0
1.0
1.3
1.7
1.5
2.1
1.7
2.6
2.7
3.5
3.3
1.0
1.0
1.0
1.2
1.5
2.4
2.1
3.3
2.5
3.3
2.9
1.0
1.1
1.1
1.1
1.8
2.1
1.1
1.6
1.7
1.7
2.5
3.1
3.9
3.7
4.5
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.1
1.3
1.9
2.4
3.0
338.79
273.57
216.43
150.57
123.37
79.76
65.89
64.12
55.79
52.97
48.04
44.85
42.02
37.77
31.93
28.70
25.88
23.71
22.45
110.78
90.52
75.39
61.60
52.20
45.05
43.65
40.74
38.31
36.40
32.04
26.43
22.39
21.45
134.03
100.19
91.81
81.61
68.63
55.90
51.49
47.27
41.94
40.80
35.46
33.43
551.58
445.09
393.19
317.28
267.59
251.76
225.79
212.33
171.34
159.88
126.87
114.79
92.63
75.18
73.50
59.66
SK 7382 - R196 U/Z - 184 TC
SK 6382 - R196 U/Z - 184 TC
SK 5282 - R196 U/Z - 184 TC
SK 4282 - R196 U/Z - 184 TC
SK 3282 - R196 U/Z - 184 TC
697
536
357
278
229
7.6
7.6
7.6
7.6
7.6
i
Regel
6.00
6.00
6.00
6.00
6.00
C14 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
5.0
5.5
6.8
8.4
8.6
10.6
12.3
14.8
1.6
2.0
2.4
2.5
2.8
3.0
3.7
3.9
1.9
2.3
2.9
4.2
5.1
5.9
3.6
1.6
2.0
3.1
4.4
5.0
5.3
73
82
95
107
135
46
52
60
68
25
28
33
37
13.5
14.0
17
20
21
23
24
62
73
91
107
29
30
37
43
54
38152
30807
24373
16957
13895
12001
14284
12930
10434
8469
8275
6717
5753
4779
44277
35727
30134
28347
25426
23913
19293
18001
19709
43542
35843
22638
16204
14116
13337
1859
1699
1434
1283
1027
912
787
700
3496
3390
2832
2425
2301
2080
1938
649
580
498
443
350
1655
1566
1292
1097
882
760
644
519
441
7.50
22
11.2
13.8
17
25
31
35
9.8
11.9
19
26
30
32
51
63
74
89
30
33
41
50
9.6
11.9
14.1
15.0
17
18
22
24
5.00
171
181
220
259
322
373
440
546
644
153
167
198
221
277
310
361
405
81
84
100
117
123
136
147
437
489
569
640
811
6.0
7.2
7.8
8.4
2.8
4.0
5.1
6.3
1.4
1.7
2.6
2.8
1.2
1.4
1.7
1.4
1.7
2.2
3.0
3.9
4.8
5.6
11.4
2.6
3.2
4.2
6.8
7.6
8.3
49321
108961
89695
56640
40551
35329
33382
66729
66729
60985
42427
34763
30037
35745
32347
26099
21187
20709
16815
14390
11965
52038
49914
52038
39648
35577
41330
48277
45047
3.5
3.7
4.0
4.2
1.7
2.2
3.0
3.2
1.1
1.3
1.5
1.6
1.7
1.5
2.0
3.5
3.7
4.0
4.2
4.7
9.8
9.2
10.3
11.1
3.9
4.6
5.8
6.9
8.2
3089
3823
3390
3027
2416
2159
1859
1655
3983
4301
4115
3938
3823
3089
3823
1531
1372
1177
1044
825
3912
3690
3053
2584
2080
1797
1522
1221
1035
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.1
1.6
2.0
2.5
2.4
2.9
3.1
3.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.2
1.6
1.9
2.2
4.6
1.0
1.3
1.7
2.7
3.1
3.3
1.0
1.0
1.3
1.4
1.5
1.6
1.7
1.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.6
1.7
1.8
2.0
1.6
2.0
2.4
2.9
3.5
4.1
3.9
4.4
4.7
45.11
43.71
36.54
31.23
29.65
26.83
24.97
23.96
21.90
18.51
16.53
13.23
11.81
10.15
9.03
8.37
7.48
6.43
5.72
4.51
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
SK 3282 - R196 U/Z - 184 TC
SK 2282 - R196 U/Z - 184 TC
229
196
175.05
386.68
318.31
201.00
143.91
125.38
118.47
338.79
273.57
216.43
150.57
123.37
106.59
393.19
317.28
267.59
251.76
225.79
212.33
171.34
159.88
126.87
114.79
92.63
75.18
73.50
59.66
51.07
42.46
SK 9382 - R210 Z - 213 TC 1680
SK 8382 - R210 U/Z - 213 TC 1014
SK 7382 - R210 U/Z - 213 TC
SK 6382 - R210 U/Z - 213 TC
739
578
7.6
7.6
11
11
11
11 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
C15
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
45
55
64
76
94
111
147
28
29
31
38
20
22
24
27
11.9
14.0
15.0
16
17
24
28
29
35
16
17
20
24
41
50
7.0
8.4
10.2
12.1
14.0
14.4
15.0
12.2
13.3
15.0
18
19
21
25
4.7
6.3
6.9
7.7
9.2
11.3
3.6
1.6
2.0
3.1
4.4
5.0
5.3
1.9
2.3
7.50
28
38
107
113
124
151
41
46
55
68
73
80
90
118
132
146
159
168
177
187
227
71
84
90
98
100
268
332
386
455
564
665
883
99
104
118
143
144
169
176
208
249
298
42
50
61
72
84
87
93
10.0
22
9.8
11.9
19
26
30
32
11.2
13.8
Weight approx.
[Lbs]
(460 V)
I
N
[A]
2.6
2.7
3.2
4.0
1.8
2.3
2.5
2.7
1.3
1.3
1.4
1.3
1.7
4.8
5.7
6.7
6.3
7.1
7.6
8.5
3.7
5.7
5.4
6.8
3.3
2.8
4.3
4.4
8.6
10.1
1.3
1.3
1.9
2.5
2.2
2.8
2.4
3.9
3.4
5.4
5.4
4.8
6.6
7.9
1.3
1.8
1.8
1.8
2.9
3.4
7478
6522
6514
5611
7275
6522
7275
7275
6673
6328
6027
5691
4699
3974
3204
2761
2345
1885
1602
1204
13063
10974
13063
14417
10956
12302
10974
10797
10257
9027
7452
7399
6310
6045
5124
4283
3575
18992
19833
18983
16178
19337
15753
14505
13319
11815
9992
9416
8593
7045
49321
108961
89695
56640
40551
35329
33382
66729
66729
8.6
1.9
2.4
3.2
5.1
5.7
6.2
1.3
1.6
5965
5053
4735
4345
4257
3593
3230
2912
2673
2531
2407
2274
1876
1593
1283
1106
938
755
640
482
10195
8487
6938
5876
5071
4912
4584
4310
4098
3611
2974
2956
2522
2416
2044
1708
1425
15089
11284
10337
9186
7726
6292
5797
5319
4726
3991
3761
3434
2814
26285
58056
47790
30179
21612
18824
17789
50870
41073
1.0
1.0
1.0
1.1
1.0
1.1
1.3
1.6
1.0
1.0
1.0
1.0
1.0
1.9
2.3
2.7
2.5
2.8
3.0
3.4
1.3
1.1
1.7
1.8
1.5
2.3
2.2
2.7
3.4
4.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.6
1.4
2.1
2.1
1.9
2.6
3.2
1.0
1.0
1.0
1.0
1.2
1.4
52.97
44.85
42.02
38.62
37.77
31.93
28.70
25.88
23.71
22.45
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
4.48
90.52
75.39
61.60
52.20
45.05
43.65
40.74
38.31
36.40
32.04
26.43
26.25
22.39
21.45
18.18
15.20
12.68
134.03
100.19
91.81
81.61
68.63
55.90
51.49
47.27
41.94
35.46
33.43
30.50
25.00
SK 5282 - R210 U/Z - 213 TC
SK 4282 - R210 U/Z - 213 TC
SK 3282 - R210 U/Z - 213 TC
399
320
271
4.6
1.0
1.3
1.7
2.7
3.1
3.3
1.0
1.0
175.05
386.68
318.31
201.00
143.91
125.38
118.47
338.79
273.57
SK 9382 - R210 Z - 215 TC 1693
SK 8382 - R210 U/Z - 215 TC 1028
SK 7382 - R210 U/Z - 215 TC 752
11
11
11
14
14
14 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
C16 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
10.0
17
25
31
35
104
118
143
169
176
208
249
298
61
72
84
87
93
99
90
107
113
124
151
38
41
46
55
68
73
80
14.1
18
22
24
30
33
41
50
51
63
74
89
177
187
227
268
332
386
455
564
665
883
100
118
132
146
159
168
15.0
10.7
13.0
2.9
4.2
5.1
5.9
2.4
3.0
3.7
3.9
5.0
5.5
6.8
8.4
8.6
10.6
12.3
14.8
29
35
41
50
17
20
24
28
10.2
12.1
14.0
14.4
15.0
16
6.3
6.9
7.7
9.2
11.3
12.2
13.3
15.0
18
19
21
25
55
64
76
94
29
31
38
45
111
147
17
20
22
24
27
28
1.8
2.2
32497
22612
18523
16001
40179
31878
25727
24001
19045
17240
13912
11284
11036
8956
7664
6372
9248
7841
6761
6558
6115
5753
5469
4814
3965
3363
3221
2726
2283
1903
15045
13788
12257
10301
8390
7735
7098
6301
5328
5018
4575
3752
5673
4797
4310
3885
3558
3372
3213
3027
2505
2115
1708
1469
1248
1009
853
643
79358
65596
2.1
3.0
3.8
4.7
1.3
1.3
1.9
2.1
4.5
5.4
5.9
6.3
2.3
3.0
3.6
4.2
4.1
5.1
6.5
7.6
2.1
3.2
3.3
4.3
1.4
1.8
1.6
2.1
1.8
2.5
4.0
4.0
3.6
4.9
5.9
1.3
1.4
1.3
2.2
2.6
2.9
2.6
4.3
5.1
4.7
5.3
2.0
2.4
3.0
3.6
5.7
6.3
1.3
1.4
1.7
1.9
2.0
1.9
60985
42427
34763
30037
52038
41330
48277
45047
35745
32347
26099
21187
20709
16815
14390
11965
13063
14417
10956
12302
10974
10797
10257
9027
7452
6310
6045
5124
4283
3575
19833
18983
16178
19337
15753
14505
13319
11815
9992
9416
8593
7045
7275
6522
7275
7275
6673
6328
6027
5691
4699
3974
3204
2761
2345
1885
1602
1204
141839
117236
2.8
3.2
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.2
1.6
1.9
2.2
1.0
1.0
1.0
1.1
1.1
1.6
2.0
2.5
2.4
2.9
3.1
3.4
1.1
1.7
1.8
2.3
2.2
2.7
3.4
4.0
1.0
1.0
1.0
1.1
1.0
1.3
2.1
2.1
1.9
2.6
3.2
1.0
1.0
1.0
1.2
1.4
1.6
1.4
1.1
1.3
1.6
1.9
2.3
2.7
2.5
2.8
3.0
3.4
1.0
1.0
1.0
1.0
1.1
1.0
216.43
150.57
123.37
106.59
267.59
212.33
171.34
159.88
126.87
114.79
92.63
75.18
73.50
59.66
51.07
42.46
61.60
52.20
45.05
43.65
40.74
38.31
36.40
32.04
26.43
22.39
21.45
18.18
15.20
12.68
100.19
91.81
81.61
68.63
55.90
51.49
47.27
41.94
35.46
33.43
30.50
25.00
37.77
31.93
28.70
25.88
23.71
22.45
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
4.48
SK 7382 - R210 U/Z - 215 TC
SK 6382 - R210 U/Z - 215 TC
SK 5282 - R210 U/Z - 215 TC
SK 4282 - R210 U/Z - 215 TC
SK 3282 - R210 U/Z - 215 TC
752
591
412
333
284
1.6
1.8
352.36
291.25
SK 9382 - R250 Z - 254 TC 1896
14
14
14
14
14
21 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
C17
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
2.3
2.9
3.1
3.9
4.2
5.1
5.9
6.8
8.0
9.2
4.1
4.7
5.0
5.7
6.5
1.5
1.9
2.0
2.4
2.9
3.2
3.9
3.1
3.6
4.4
4.6
1.6
2.0
2.1
2.6
3.1
3.4
4.1
4.4
5.0
5.3
6.1
6.9
9.2
11.3
12.2
13.3
15.0
18
19
21
25
10.6
12.3
14.8
17
20
22
3.7
3.9
5.0
5.5
6.8
8.4
8.6
90
107
113
124
151
55
68
73
80
63
74
89
104
122
132
22
24
30
33
41
50
51
13.8
17
18
23
25
31
35
41
48
55
9.2
11.2
12.1
14.7
18
19
23
25
28
30
34
39
15.0
18
22
26
28
9.8
11.9
12.9
16
30
32
37
42
19
20
25
26
Weight approx.
[Lbs]
(460 V)
I
N
[A]
61614
48746
46170
36524
33913
27789
24010
20983
17753
15337
92713
76322
70490
58029
48197
44516
36648
34506
30063
28409
24745
21806
46100
39427
32586
30603
87093
71694
66216
54507
45268
41816
34418
32409
28240
26683
23249
20479
15461
12594
11594
10647
9443
7983
7531
6868
5629
38586
36011
28577
25851
20859
16930
16550
13434
11505
9567
8186
6965
6469
1.1
1.5
1.4
1.5
2.0
2.4
2.8
3.2
3.7
4.2
3.2
3.6
3.9
4.3
4.9
1.2
1.5
1.6
2.0
2.0
2.5
3.2
3.8
4.1
4.6
5.2
2.1
2.7
3.4
3.4
1.3
1.6
1.7
2.1
4.2
5.7
6.5
7.3
2.7
2.7
2.4
3.3
4.0
1.5
1.7
2.0
1.7
3.6
3.9
4.2
4.9
5.8
6.3
1.3
1.4
1.4
2.0
2.5
3.1
3.0
66729
73455
66729
55490
60614
49657
42905
37506
31727
27417
112395
115050
112395
115935
95580
112218
98244
92509
80597
76154
66340
58454
82394
70464
58242
54702
112395
115050
112395
97421
80907
74738
61516
57932
50472
47693
41542
36604
22736
21470
20727
18143
16886
14275
13461
12275
10062
49295
51065
40533
46206
37285
30267
29586
24019
20559
17089
14629
12443
11558
1.0
1.0
1.0
1.0
1.1
1.3
1.6
1.8
2.1
2.3
1.2
1.3
1.4
1.6
1.8
1.0
1.0
1.0
1.0
1.0
1.0
1.2
2.4
3.2
3.6
4.1
1.0
1.0
1.0
1.2
1.2
1.5
1.9
1.9
2.1
2.3
2.6
2.9
1.0
1.0
1.1
1.0
1.5
1.5
1.3
1.8
2.2
2.0
2.2
2.4
2.8
3.2
3.5
1.0
1.0
1.0
1.1
1.4
1.8
1.7
273.57
216.43
204.99
162.17
150.57
123.37
106.59
93.18
78.81
68.10
386.68
318.31
294.01
242.02
201.00
185.66
152.83
143.91
125.38
118.47
103.21
90.94
204.68
175.05
144.69
135.90
386.68
318.31
294.01
242.02
201.00
185.66
152.83
143.91
125.38
118.47
103.21
90.94
68.63
55.90
51.49
47.27
41.94
35.46
33.43
30.50
25.00
171.34
159.88
126.87
114.79
92.63
75.18
73.50
59.66
51.07
42.46
36.34
30.91
28.72
SK 9382 - R250 Z - 254 TC
SK 8382 - R250 Z - 254 TC
1896
1230
SK 8382 - R280 U/Z - 254 TC 1248
SK 7382 - R250 U/Z - 254 TC
SK 6382 - R250 U/Z - 254 TC
SK 5282 - R250 U/Z - 254 TC
955
767
589
21
21
21
21
21
21 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
C18 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
3.9
4.1
4.7
5.0
5.7
6.5
7.8
9.1
10.3
12.4
1.9
2.0
2.4
2.9
3.2
1.8
2.2
3.1
3.7
4.4
4.7
5.6
6.4
7.7
1.7
2.0
2.9
3.4
4.1
4.4
5.1
5.9
7.1
20.0
10.1
12.2
17
20
25
26
31
35
43
11.2
12.1
14.7
18
19
34
39
47
54
23
25
28
30
62
74
10.9
13.2
19
22
27
28
33
38
46
15.0
186
200
215
104
118
143
169
176
208
249
298
72
84
87
93
99
348
409
454
530
624
696
756
804
112643
93111
65437
55959
46259
43445
36949
32249
26594
103678
85695
60224
51507
42569
39984
34002
29683
24479
101757
93996
77367
64260
59357
48861
46002
40082
37869
32993
29072
24196
20851
18364
15284
4584
4248
3965
11753
10142
9832
9177
8629
8195
7213
5956
5045
4832
4098
3425
2859
2443
2080
1876
1602
1363
1221
1124
1062
31
33
36
29
35
41
50
17
20
24
28
12.1
14.0
14.4
15.0
16
104
116
126
134
58
68
76
88
3.2
3.7
4.4
4.8
2.4
2.4
2.7
2.9
5.8
7.0
1.1
1.2
1.5
1.5
1.9
5.0
5.6
6.6
7.6
2.2
2.5
3.2
4.4
8.7
2.0
2.3
3.0
4.0
4.6
5.2
6.1
7.0
8.0
224790
187213
131573
112519
93005
87358
74287
64853
53472
224790
212400
164150
140388
116032
108988
92686
80907
66711
115050
112395
115935
95580
112218
98244
92509
80597
76154
66340
58454
48657
41922
36913
30727
5.3
4.8
5.9
2.7
3.4
4.3
5.1
1.4
2.1
2.2
2.9
1.2
1.1
1.4
1.2
1.7
7.5
7.5
7.6
7.8
5.9
7.0
5.3
6.3
8195
7602
7080
14417
10956
13567
10974
14408
11319
12894
10638
9009
8638
7319
6115
5106
4372
3717
3354
2867
2443
2186
2009
1894
3.0
2.7
3.3
1.0
1.2
1.2
1.6
1.5
1.9
2.4
2.8
1.0
1.0
1.0
1.0
1.0
3.3
3.9
3.0
3.5
4.2
4.2
4.3
4.4
Weight approx.
[Lbs]
(460 V)
I
N
[A]
20.36
18.88
17.59
52.20
45.05
43.65
40.74
38.31
36.40
32.04
26.43
22.39
21.45
18.18
15.20
12.68
10.85
9.23
8.33
7.13
6.06
5.43
5.00
4.70
SK 5282 - R250 U/Z - 254 TC
SK 4282 - R250 U/Z - 254 TC
589
509
1.2
1.2
1.3
1.4
1.6
1.8
2.2
2.4
2.9
3.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.6
1.8
2.1
2.4
2.8
3.2
1.0
1.1
1.5
2.0
2.3
2.6
3.0
3.5
4.0
318.31
294.01
242.02
201.00
185.66
152.83
143.91
125.38
118.47
103.21
90.94
75.69
65.22
57.43
47.80
352.36
291.25
204.68
175.05
144.69
135.90
115.57
100.89
83.19
352.36
291.25
204.68
175.05
144.69
135.90
115.57
100.89
83.19
SK 9382 - R280 Z - 256 TC 1932
SK 9382 - R300 U/Z - 256 TC 1991
SK 8382 - R280 U/Z - 256 TC 1266
21
21
27
27
27 i
Regel
6.00
6.00
6.00
6.00
6.00
www.nord.com
C19
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
20.0
16
22
24
29
33
38
45
52
60
67
76
96
155
190
100
106
116
142
174
188
202
231
64
69
75
85
87
273
331
375
408
495
561
622
671
60
70
84
98
31
38
47
48
115
124
145
25.0
10.9
13.2
19
22
27
28
33
38
46
59
16
19
Weight approx.
[Lbs]
(460 V)
I
N
[A]
36701
29612
24037
23497
19072
16328
13576
11620
9885
9177
7806
69189
51843
48135
39436
34073
29789
25196
21771
19028
17063
14912
11806
7337
5983
17868
16461
15116
13408
13045
11337
10691
9753
7992
6505
6036
5620
4921
4160
3425
3027
2779
2292
2027
1823
1690
129591
107120
75278
64384
53215
49985
42507
37108
30594
24001
89013
73924
5.2
6.4
7.9
8.0
9.9
11.6
13.9
16
19
21
24
7.5
8.7
9.9
11.1
12.7
16
2.7
3.6
3.9
4.8
5.6
6.3
26
32
29
31
34
38
17
18
19
24
10.6
11.5
12.5
14.1
14.5
83
93
104
112
46
55
63
68
1.8
2.2
3.1
3.7
4.4
4.7
5.6
6.4
7.7
9.9
2.7
3.2
2.6
2.8
3.0
3.5
1.4
1.8
2.2
2.1
4.1
4.4
5.3
2.6
2.9
3.3
3.7
4.2
5.0
1.1
1.1
1.4
1.7
2.0
2.2
5.5
6.5
3.7
3.4
4.2
4.0
1.9
1.7
2.3
2.8
1.2
1.4
1.2
1.9
1.5
8.3
9.2
8.4
8.7
5.6
5.5
6.0
6.8
52038
53100
48330
47250
38347
32825
27293
23355
19868
18461
15700
73455
55490
66729
66729
66729
59897
50657
43772
38259
34311
29993
23736
14753
12018
21470
22709
18143
25346
18983
21417
18036
19603
16072
13089
12133
11310
9885
8354
6885
6080
5593
4611
4071
3673
3398
224790
212400
164150
140388
116032
108988
92686
80907
66711
52330
115935
95580
5.3
6.1
6.9
8.9
1.7
2.0
2.6
3.5
4.0
4.5
1.3
1.3
1.0
1.0
1.1
1.0
1.3
1.4
1.5
1.7
2.0
2.2
2.6
1.3
1.5
1.6
1.8
2.1
2.5
1.0
1.0
1.0
1.0
1.0
1.1
2.7
3.3
1.0
1.0
1.2
1.4
1.9
1.7
2.1
2.0
1.0
1.0
1.0
1.0
1.0
2.8
2.7
3.0
3.4
4.1
4.6
4.2
4.3
114.79
92.63
75.18
73.50
59.66
51.07
42.46
36.34
30.91
28.72
24.42
216.43
162.17
150.57
123.37
106.59
93.18
78.81
68.10
59.52
53.38
46.66
36.92
22.95
18.70
55.90
51.49
47.27
41.94
40.80
35.46
33.43
30.50
25.00
20.36
18.88
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
5.71
5.29
SK 7382 - R280 U/Z - 256 TC
SK 6382 - R280 U/Z - 256 TC
SK 6282 - R280 U/Z - 256 TC
SK 5282 - R280 U/Z - 256 TC
990
803
836
624
1.0
1.0
1.2
1.6
1.8
2.1
2.4
2.8
3.2
4.1
1.0
1.0
352.36
291.25
204.68
175.05
144.69
135.90
115.57
100.89
83.19
65.25
242.02
201.00
SK 9382 - R300 U/Z - 284 TC 2042
SK 8382 - R300 U/Z - 284 TC 1376
27
27
27
27
34
34 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
C20 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
1.2
1.6
1.9
1.8
2.2
2.4
2.6
3.0
3.5
3.9
4.6
4.8
5.7
7.3
3.5
4.9
4.7
5.2
2.4
3.2
2.9
3.6
1.2
1.6
1.3
1.6
1.5
2.0
5.9
7.3
8.0
2.3
2.5
2.9
3.2
1.2
1.5
1.7
1.9
3.7
4.3
5.2
5.9
2.8
3.2
3.8
4.2
5.1
6.1
5.9
1.6
2.1
2.1
2.3
2.5
52038
53100
53100
49295
47843
40958
34055
29143
24789
23037
19585
18408
15001
11894
22709
25346
18983
21417
18036
22559
20045
16328
15142
14107
12337
10425
8593
7584
6974
5753
5080
66729
66729
66729
66729
63207
54613
47737
42807
37418
29612
24399
21559
112218
116820
110625
100554
95005
82774
72933
60702
52304
46055
38329
34958
18
21
22
26
5.6
6.9
8.6
8.7
10.8
12.6
15.0
28
34
43
42
49
60
68
26
32
34
37
12.5
15.0
16
18
19
21
74
90
102
4.3
5.2
6.0
6.9
8.2
9.4
10.8
12.0
13.8
17
21
24
6.2
7.1
8.5
9.9
11.2
13.4
14.7
3.5
4.2
4.5
5.1
5.4
1.8
2.2
3.1
3.7
42215
34064
27647
27028
21939
18780
15620
13364
11372
10567
8983
8443
6876
5452
18939
15426
15010
13045
12293
11222
9195
7487
6947
6469
5655
4779
3938
3478
3204
2637
2328
55374
45374
39206
34267
28984
25046
21895
19629
17160
13576
11186
9885
68287
56206
52932
46109
43569
37958
33444
27833
23984
21125
17576
16027
25.0
21
37
42
51
59
25
27
31
33
67
81
88
106
125
134
158
34
42
51
52
65
76
91
83
104
127
143
49
57
65
72
26
31
36
41
168
206
260
154
189
204
219
251
297
360
408
75
92
95
109
115
126
443
538
609
30.0
10.9
13.2
19
22
155512
128537
90332
77261
224790
212400
164150
140388
1.4
1.7
2.2
2.9
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.4
1.6
1.8
2.1
2.2
2.6
3.3
1.1
1.5
1.3
1.7
1.6
2.2
2.2
2.4
1.0
1.0
1.0
1.0
1.0
1.0
2.7
3.3
3.7
1.0
1.0
1.0
1.0
1.0
1.2
1.3
1.5
1.7
2.0
2.4
2.7
1.3
1.5
1.8
1.9
2.3
2.8
2.7
1.0
1.0
1.0
1.1
1.2
114.79
92.63
75.18
73.50
59.66
51.07
42.46
36.34
30.91
28.72
24.42
22.95
18.70
14.83
51.49
41.94
40.80
35.46
33.43
30.50
25.00
20.36
18.88
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
150.57
123.37
106.59
93.18
78.81
68.10
59.52
53.38
46.66
36.92
30.42
26.88
185.66
152.83
143.91
125.38
118.47
103.21
90.94
75.69
65.22
57.43
47.80
43.59
SK 8382 - R300 U/Z - 284 TC 1376
SK 7382 - R300 U/Z - 284 TC 1100
SK 6382 - R300 U/Z - 284 TC
SK 6282 - R300 U/Z - 284 TC
SK 5282 - R300 U/Z - 284 TC
911
946
732
1.0
1.0
1.2
1.6
352.36
291.25
204.68
175.05
SK 9382 - R300 U/Z - 286 TC 2064
34
34
34
34
34
40 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
C21
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
30.0
27
28
33
38
46
59
42
51
52
65
76
91
106
125
134
158
168
206
260
219
251
297
360
408
443
538
609
92
95
109
115
126
154
189
204
83
104
127
143
31
36
41
49
57
65
72
59
67
81
88
33
37
42
51
16
19
21
25
27
31
Weight approx.
[Lbs]
(460 V)
I
N
[A]
63862
59976
51003
44524
36719
28798
40878
33179
32435
26329
22541
18735
16036
13638
12673
10779
10124
8257
6549
7761
6788
5735
4726
4177
3841
3168
2797
18514
18010
15647
14753
13461
11036
8983
8337
54445
47047
41126
34781
30055
26267
23559
20594
16293
13425
11859
106811
88712
81942
67446
63516
55339
52286
45551
40135
33409
28780
25346
21098
19240
6.9
8.6
8.7
10.8
12.6
15.0
18
21
22
26
28
34
43
37
42
49
60
68
74
90
102
21
26
32
34
15.0
16
18
19
5.2
6.0
6.9
8.2
9.4
10.8
12.0
13.8
17
21
24
5.4
6.2
7.1
8.5
9.9
11.2
13.4
14.7
2.7
3.2
3.5
4.2
4.5
5.1
4.4
4.7
5.6
6.4
7.7
9.9
1.3
1.6
1.5
1.8
2.0
2.1
2.5
3.0
3.2
3.9
4.0
4.7
6.0
3.0
2.9
4.1
4.0
4.3
4.9
6.0
6.7
1.7
2.0
2.7
2.4
1.4
1.1
1.4
1.2
1.2
1.4
1.6
1.9
2.1
2.4
2.7
3.0
3.6
4.4
4.9
3.5
4.2
5.1
4.9
2.1
2.4
2.7
3.2
1.1
1.1
1.4
1.7
1.7
1.9
3.3
3.7
4.4
5.0
5.8
7.5
116032
108988
92686
80907
66711
52330
53100
53100
49295
47843
40958
34055
29143
24789
23037
19585
18408
15001
11894
14107
12337
10425
8593
7584
6974
5753
5080
25346
18983
21417
18036
22559
20045
16328
15142
66729
66729
66729
63207
54613
47737
42807
37418
29612
24399
21559
115935
95580
112218
116820
110625
100554
95005
82774
72933
60702
52304
46055
38329
34958
1.0
1.0
1.0
1.0
1.1
1.2
1.4
1.6
1.8
2.1
2.2
2.6
3.3
1.7
1.6
2.2
2.2
2.4
2.7
3.3
3.7
1.0
1.0
1.0
1.0
1.0
1.1
1.5
1.3
1.0
1.0
1.0
1.0
1.2
1.3
1.5
1.7
2.0
2.4
2.7
1.2
1.3
1.5
1.8
1.9
2.3
2.8
2.7
1.0
1.0
1.0
1.0
1.0
1.1
1.8
2.1
2.4
2.8
3.2
4.1
144.69
135.90
115.57
100.89
83.19
65.25
92.63
75.18
73.50
59.66
51.07
42.46
36.34
30.91
28.72
24.42
22.95
18.70
14.83
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
41.94
40.80
35.46
33.43
30.50
25.00
20.36
18.88
123.37
106.59
93.18
78.81
68.10
59.52
53.38
46.66
36.92
30.42
26.88
242.02
201.00
185.66
152.83
143.91
125.38
118.47
103.21
90.94
75.69
65.22
57.43
47.80
43.59
SK 9382 - R300 U/Z - 286 TC 2064
SK 8382 - R300 U/Z - 286 TC 1398
SK 7382 - R300 U/Z - 286 TC 1122
SK 6382 - R300 U/Z - 286 TC
SK 6282 - R300 U/Z - 286 TC
SK 5282 - R300 U/Z - 286 TC
933
968
754
40
40
40
40
40
40 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
C22 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
28
35
44
52
61
32
40
50
65
74
6.1
6.9
8.2
9.5
10.8
12.1
13.8
17
21
24
28
8.6
8.8
10.8
12.6
15.0
18
21
22
26
23
26
31
37
11.2
13.5
14.8
18
21
4.2
4.5
5.1
5.4
6.3
7.1
8.5
9.9
4.7
5.6
6.4
7.8
9.9
11.6
13.3
1.8
2.2
3.2
3.7
4.5
62499
54640
46215
39931
34904
31302
27364
21647
17842
15762
13293
11709
9549
7558
5814
5080
44082
43100
34984
29948
24895
21311
18125
16842
14319
89615
84385
73517
69464
60516
53321
44383
38241
33674
28028
25559
21036
18134
16611
14364
12390
10204
206612
170778
120015
102642
84845
79685
67764
59162
48781
38259
32541
28400
13461
10965
8700
7239
6239
40.0
11.0
13.3
19
22
27
28
33
38
47
59
70
80
73
83
105
127
144
171
36
42
49
57
65
194
238
300
390
447
51
53
65
76
91
107
125
135
159
67
81
89
108
125
38
43
51
59
25
27
31
33
137
158
183
222
169
207
261
313
364
2.0
2.3
2.7
3.3
3.7
4.4
1.1
1.2
1.4
1.6
1.8
4.4
6.0
6.9
6.5
7.4
1.2
1.1
1.4
1.5
1.6
1.9
2.2
2.4
2.9
3.2
3.8
3.7
5.1
5.9
1.8
2.0
2.4
2.6
1.3
1.3
1.5
1.6
5.3
6.5
7.6
8.4
3.0
3.6
4.6
5.4
6.1
2.8
3.3
3.8
4.4
5.6
6.5
7.5
1.1
1.2
1.6
2.2
2.5
66729
66729
65667
63720
62481
62658
62658
53206
43834
38736
32665
28780
23479
18576
14293
12479
116820
110625
107882
110183
107085
107085
107085
93987
82756
68880
62817
51702
44560
40825
35303
30453
25072
53100
49295
48675
44958
40268
40268
40268
40710
35188
224790
212400
194700
224790
208506
195842
166539
145388
119882
94031
79960
69800
33072
26948
21373
17797
15337
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.0
1.0
1.1
1.3
1.5
1.8
1.0
1.0
1.0
1.0
1.0
1.8
2.4
2.8
2.6
3.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.3
1.6
1.5
2.1
2.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
2.2
2.7
3.1
3.4
1.2
1.5
1.9
2.2
2.5
1.1
1.3
1.5
1.8
2.3
2.7
3.0
1.0
1.0
1.0
1.0
1.0
106.59
93.18
78.81
68.10
59.52
53.38
46.66
36.92
30.42
26.88
22.67
19.97
16.29
12.89
9.92
8.66
75.18
73.50
59.66
51.07
42.46
36.34
30.91
28.72
24.42
152.83
143.91
125.38
118.47
103.21
90.94
75.69
65.22
57.43
47.80
43.59
35.88
30.92
28.33
24.50
21.13
17.40
352.36
291.25
204.68
175.05
144.69
135.90
115.57
100.89
83.19
65.25
55.49
48.44
22.95
18.70
14.83
12.35
10.64
SK 9382 - R350 U/Z - 200L/4 2126
SK 8382 - R350 U/Z - 200L/4 1460
SK 8282 - R350 U/Z - 200L/4 1451
SK 7382 - R350 U/Z - 200L/4 1184
SK 7282 - R350 U/Z - 200L/4 1169
SK 6382 - R350 U/Z - 200L/4 994
SK 6282 - R350 U/Z - 200L/4 1030
45
45
45
45
45
45
45 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
C23
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
50.0
23
27
31
37
43
47
56
64
74
87
90
101
115
134
52
58
66
84
102
115
137
155
190
240
277
109
126
147
178
204
239
30
34
41
47
54
65
71
86
100
40.0
412
495
574
252
298
361
409
445
540
612
127
155
190
205
220
Weight approx.
[Lbs]
(460 V)
I
N
[A]
124555
105926
92465
76243
66163
59799
50861
44392
38427
32639
31506
28223
24647
21213
54551
48923
42763
33834
27878
24638
20780
18302
14930
11815
10231
94598
83349
69375
59773
52631
43808
39949
32887
28338
25966
22452
19364
15948
13912
11877
5505
4584
3956
17886
14656
11939
11071
10310
9018
7620
6284
5549
5098
4204
3708
18
20
23
27
4.6
5.4
6.1
7.4
8.6
9.5
11.2
12.8
14.8
17
31
38
48
55
10.4
11.6
13.3
17
20
23
27
22
25
29
36
41
48
9.5
10.8
13.0
14.2
17
20
6.0
6.8
8.2
69
83
96
42
50
60
68
74
90
102
21
26
32
34
37
13532
11266
9708
22559
22311
24276
20222
23488
19780
18735
15434
13629
12540
10328
9124
4.4
5.2
6.7
2.2
3.1
3.0
3.3
3.7
4.5
5.0
1.3
1.5
2.0
1.8
2.3
1.8
2.1
2.4
2.8
3.2
3.6
4.2
4.8
5.5
6.5
4.6
5.6
6.2
6.9
2.8
3.8
4.4
5.4
1.1
1.3
1.5
1.7
2.1
2.4
2.8
3.4
4.2
4.9
5.4
6.0
7.7
1.1
1.3
1.5
1.7
2.0
2.4
2.3
3.3
3.8
224790
224790
220356
181699
157672
142512
121201
105802
91580
77774
75092
67251
58729
50560
62481
62658
62658
58587
58587
58587
49516
43613
35577
28152
24373
107085
107085
107085
100005
107085
104403
93810
78367
67534
61879
53507
46153
38002
33152
28302
1.8
2.1
2.7
1.0
1.2
1.2
1.3
1.5
1.9
2.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.3
1.5
1.8
2.0
2.3
2.7
1.9
2.4
2.6
2.9
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.6
1.8
2.3
1.4
1.8
2.0
2.3
2.5
3.2
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.4
1.6
9.39
7.82
6.74
30.50
25.00
20.36
18.88
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
SK 6282 - R350 U/Z - 200L/4 1030
SK 5282 - R350 U/Z - 200L/4 816
135.90
115.57
100.89
83.19
72.19
65.25
55.49
48.44
41.93
35.61
34.38
30.79
26.89
23.15
59.52
53.38
46.66
36.92
30.42
26.88
22.67
19.97
16.29
12.89
11.16
103.21
90.94
75.69
65.22
57.43
47.80
43.59
35.88
30.92
28.33
24.50
21.13
17.40
15.18
12.96
SK 9382 - R375 U/Z - 225S/4 2509
SK 9282 - R375 U/Z - 225S/4 2498
SK 8382 - R375 U/Z - 225S/4 1843
SK 8282 - R375 U/Z - 225S/4 1835
SK 7382 - R375 U/Z - 225S/4 1568
SK 7282 - R375 U/Z - 225S/4 1552
45
45
62
62
62
62
62
62 i
Regel
6.00
6.00
5.00
5.00
5.00
5.00
5.00
5.00
C24 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
18
20
23
27
6.8
8.2
9.5
10.8
13.0
14.2
17
20
4.6
5.4
6.1
7.4
8.6
9.5
11.2
12.8
14.8
17
11.6
13.3
17
20
23
27
22
25
29
36
41
48
31
38
48
60.0
23
27
56
64
74
87
31
37
43
47
58
66
84
102
115
137
109
126
147
178
204
239
155
190
240
90
101
115
134
34
41
47
54
65
71
86
100
50.0
312
327
357
413
487
518
291
330
396
459
517
536
563
634
104
119
135
166
209
251
103
107
113
127
58
66
79
92
21
24
27
33
42
50
62
65
71
83
97
104
9089
8691
7938
6868
5832
5478
27400
23877
21036
17142
13594
11319
9753
8602
7169
6177
5487
5301
5045
4469
1.1
1.3
1.4
1.7
2.0
2.0
2.7
3.1
3.8
4.7
5.1
5.7
1.5
1.8
2.0
2.3
2.7
3.0
3.5
4.0
4.6
5.4
1.1
1.2
1.4
1.8
2.0
2.3
2.8
3.5
4.0
4.5
5.0
6.4
2.3
3.2
3.7
75092
67251
58729
50560
107085
107085
100005
107085
104403
93810
78367
67534
224790
224790
220356
181699
157672
142512
121201
105802
91580
77774
61879
53507
46153
38002
33152
28302
62658
62658
58587
58587
58587
49516
43613
35577
28152
37816
33860
29577
25461
100014
83243
71729
63162
52569
47940
39462
34011
149468
127104
110961
91491
79393
71765
61030
53277
46117
39161
31161
26948
23240
19134
16691
14257
58711
51321
40604
33453
29559
24930
21966
17912
14178
3.9
3.9
4.0
4.3
3.9
2.8
3.3
4.3
1.5
1.7
1.9
2.3
2.9
3.4
4.2
6.4
4.7
5.8
6.8
7.0
21665
20709
18912
16355
13895
13063
40152
40117
40135
39179
32391
26975
23240
20505
17081
14718
13080
12620
12009
10655
1.6
1.2
1.4
1.8
1.6
1.6
1.7
1.8
1.0
1.0
1.0
1.0
1.2
1.4
1.7
2.7
2.0
2.4
2.8
2.9
Weight approx.
[Lbs]
(460 V)
I
N
[A]
29.90
26.05
22.95
18.70
14.83
12.35
10.64
9.39
7.82
6.74
5.99
5.78
5.50
4.88
9.92
9.48
8.66
7.49
6.36
5.98
SK 7282 - R375 U/Z - 225S/4 1552
SK 6282 - R375 U/Z - 225S/4 1413
1.9
2.4
2.6
2.9
1.0
1.0
1.0
1.0
1.0
1.0
1.4
1.6
1.0
1.0
1.0
1.2
1.3
1.5
1.8
2.0
2.3
2.7
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.8
2.0
2.3
2.5
3.2
1.2
1.6
1.8
34.38
30.79
26.89
23.15
90.94
75.69
65.22
57.43
47.80
43.59
35.88
30.92
135.90
115.57
100.89
83.19
72.19
65.25
55.49
48.44
41.93
35.61
28.33
24.50
21.13
17.40
15.18
12.96
53.38
46.66
36.92
30.42
26.88
22.67
19.97
16.29
12.89
SK 9382 - R375 U/Z - 225M/4 2582
SK 9282 - R375 U/Z - 225M/4 2571
SK 8382 - R375 U/Z - 225M/4 1916
SK 8282 - R375 U/Z - 225M/4 1907
SK 7382 - R375 U/Z - 225M/4 1641
SK 7282 - R375 U/Z - 225M/4 1625
62
62
71
71
71
71
71
71 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
www.nord.com
C25
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
109
126
146
178
204
239
320
374
47
54
65
71
86
100
84
102
115
136
75.0
23
47
56
64
74
27
31
37
43
87
90
100
115
134
154
60.0
277
312
327
357
413
487
518
251
291
330
396
459
517
536
563
634
104
119
135
166
209
Weight approx.
[Lbs]
(460 V)
I
N
[A]
89766
79048
65791
59994
49383
42560
38993
33719
29081
23948
20895
17842
13310
11372
187054
159070
138865
114501
99359
89810
76376
66676
57711
49011
47321
42383
37011
31860
27709
50817
41869
37002
31205
12275
10912
10425
9523
8239
6992
6576
32887
28647
25240
20567
16311
13585
11700
10328
8602
7416
6584
6354
6053
5363
17
20
23
27
22
25
29
36
41
48
64
75
9.5
10.8
12.9
14.2
17
20
18
20
23
27
31
9.5
11.1
12.8
14.7
17
4.6
5.4
6.1
7.4
8.6
92
103
107
113
50
58
66
79
127
21
24
27
33
42
55
62
65
71
83
97
104
2.3
2.8
3.2
3.6
4.0
5.1
4.3
5.7
1.1
1.4
1.6
1.6
2.2
2.5
1.2
1.4
1.6
1.9
2.4
2.8
3.2
3.7
4.3
1.2
1.4
1.6
1.9
2.1
3.0
3.7
4.1
4.6
5.1
100005
107085
107085
93810
90721
78181
71632
61950
53427
43993
38382
32772
24453
20886
224790
224790
224790
210338
182522
164982
140299
122475
106014
90040
86925
77853
67986
58534
50896
58587
58587
58587
57321
3.6
3.2
3.3
3.3
2.9
3.3
2.4
2.8
3.6
1.2
1.4
1.6
1.9
2.4
4.5
3.5
5.3
3.9
4.8
5.6
5.8
24373
21665
20709
18912
16355
13895
13063
40152
40117
40135
39179
32391
26975
23240
20505
17081
14718
13080
12620
12009
10655
1.2
1.5
1.8
2.0
2.2
2.8
2.4
3.1
1.0
1.0
1.0
1.0
1.2
1.4
1.3
1.5
1.7
2.0
2.4
1.0
1.0
1.0
1.0
1.2
1.7
2.0
2.2
2.5
2.8
1.0
1.0
1.0
1.0
1.4
1.6
1.2
1.4
1.8
1.6
1.6
1.7
1.8
1.0
1.0
1.0
1.0
1.2
2.3
1.7
2.7
2.0
2.4
2.8
2.9
11.16
9.92
9.48
8.66
7.49
6.36
5.98
29.90
26.05
22.95
18.70
14.83
12.35
10.64
9.39
7.82
6.74
5.99
5.78
5.50
4.88
SK 7282 - R375 U/Z - 225M/4 1625
SK 6282 - R375 U/Z - 225M/4 1486
65.22
57.43
47.80
43.59
35.88
30.92
28.33
24.50
21.13
17.40
15.18
12.96
9.67
8.26
135.90
115.57
100.89
83.19
72.19
65.25
55.49
48.44
41.93
35.61
34.38
30.79
26.89
23.15
20.13
36.92
30.42
26.88
22.67
SK 9382 - R400 U/Z - 250M/4 2988
SK 9282 - R400 U/Z - 250M/4 2977
SK 8382 - R400 U/Z - 250M/4 2322
SK 8282 - R400 U/Z - 250M/4 2313
SK 7382 - R400 U/Z - 250M/4 2046
71
71
85
85
85
85
85 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
5.00
C26 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
100.0
78
89
103
119
138
163
199
235
277
339
74
113
137
158
185
220
247
290
346
75.0
155
190
240
277
312
326
357
413
486
517
329
395
459
516
535
562
634
119
135
165
208
250
291
125.0
78
89
104
119
138
163
200
236
278
340
114
138
158
185
221
248
19
22
26
30
35
41
50
59
69
85
46
55
62
72
19
28
34
39
86
66
79
92
103
107
112
127
24
27
33
42
50
58
65
71
83
97
103
31
38
48
55
62
28
34
39
46
55
62
35
41
50
59
19
22
26
30
69
85
73057
63800
54932
47763
41117
34878
28497
24152
20497
16753
76499
50135
41285
36020
30754
25771
22948
19603
16417
35851
31586
25736
20408
17001
14647
12921
10762
9275
8248
7956
7567
6717
27488
22426
17744
15364
13656
13045
11921
10310
8753
8231
91067
79526
68464
59534
51250
43480
35524
30108
25550
20877
62490
51463
44896
38329
32117
28603
2.2
2.4
2.6
3.0
3.3
3.7
4.3
4.0
4.8
5.3
3.0
3.5
2.5
3.3
1.2
1.9
2.1
2.3
3.7
158681
152220
131555
114395
98483
83535
68251
57852
49100
40117
91562
93969
85818
83898
73650
61711
54950
46940
39321
1.9
2.2
2.9
2.6
2.6
2.7
2.8
1.1
1.3
1.5
1.9
2.3
2.6
4.2
3.1
3.9
4.5
4.6
1.9
2.6
2.9
3.6
2.8
40117
40135
39179
37497
31223
26904
23745
19771
17045
15142
14611
13903
12337
50489
41188
32595
28214
25081
23966
21895
18939
16080
15116
158681
152220
131184
114068
98200
83296
68057
57684
48958
40011
93969
85818
83898
73437
61543
54799
1.5
1.7
1.9
2.4
2.8
2.0
2.7
3.0
3.4
3.2
1.7
1.9
2.1
2.4
3.9
4.3
1.0
1.0
1.1
1.2
1.4
1.6
1.8
1.7
2.0
2.2
1.0
1.0
1.0
1.0
1.2
1.5
1.1
1.4
1.5
1.0
1.2
1.6
1.4
1.4
1.5
1.5
1.0
1.0
1.0
1.1
1.2
1.4
2.3
1.7
2.1
2.4
2.5
1.0
1.4
1.6
2.0
1.5
1.0
1.0
1.0
1.2
1.5
1.1
1.0
1.0
1.1
1.2
1.4
1.6
1.8
1.7
2.0
2.2
Weight approx.
[Lbs]
(460 V)
I
N
[A]
26.05
22.95
18.70
14.83
12.35
10.64
9.39
7.82
6.74
5.99
5.78
5.50
4.88
19.97
16.29
12.89
11.16
9.92
9.48
8.66
7.49
6.36
5.98
SK 7282 - R400 U/Z - 250M/4 2031
SK 6282 - R400 U/Z - 250M/4 1892
30.79
26.89
23.15
20.13
17.33
14.70
12.01
10.18
8.64
7.06
32.24
21.13
17.40
15.18
12.96
10.86
9.67
8.26
6.92
SK 9282 - R500 U/Z - 280S/4 4046
SK 8282 - R500 U/Z - 280S/4 3382
30.79
26.89
23.15
20.13
17.33
14.70
12.01
10.18
8.64
7.06
21.13
17.40
15.18
12.96
10.86
9.67
SK 9282 - R500 U/Z - 280M/4 4156
SK 8282 - R500 U/Z - 280M/4 3493
85
85
111
111
145
145 i
Regel
5.00
5.00
4.00
4.00
4.00
4.00
www.nord.com
C27
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
125.0
290
347
150.0
78
89
104
119
138
163
200
236
278
340
114
138
158
185
221
248
290
347
73
87
41
50
59
69
85
19
22
26
30
35
28
34
39
46
55
62
73
87
24426
20470
109271
95430
82163
71446
61508
52171
42622
36126
30665
25054
74995
61755
53879
45993
38542
34320
29311
24559
46808
39214
2.6
2.9
158681
152220
131184
114068
98200
83296
68057
57684
48958
40011
93969
85818
83898
73437
61543
54799
46808
39214
2.5
2.9
2.6
3.2
3.6
1.5
1.6
1.8
2.0
2.2
1.3
1.4
1.6
2.0
2.4
1.7
2.2
2.4
1.4
1.5
1.6
1.8
1.7
2.0
2.2
1.0
1.0
1.1
1.2
1.4
1.0
1.0
1.0
1.2
1.5
1.1
1.4
1.5
Weight approx.
[Lbs]
(460 V)
I
N
[A]
8.26
6.92
SK 8282 - R500 U/Z - 280M/4 3493
30.79
26.89
23.15
20.13
17.33
14.70
12.01
10.18
8.64
7.06
21.13
17.40
15.18
12.96
10.86
9.67
8.26
6.92
SK 9282 - R500 U/Z - 315S/4 4531
SK 8282 - R500 U/Z - 315S/4 3868
145
173
173 i
Regel
4.00
4.00
4.00
C28 www.nord.com
NOTES www.nord.com
C29
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
U -DESIGN, WITH SOLID SHAFT, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AD
SK 1282 V - R 100 U - 56 C
- 143 TC
- 145 TC
DB
4.53
4.80
- R 150 U - 145 TC
SK 2282 V - R 150 U - 145 TC 4.96
8.31
7.48
DF
D1
GE
6.50
6.22
1.34
GF
H2
N
0.55
0.43
2.90
0.63
0.55
O
QA
SA
10.98
7.20
3.03
13.27
7.91
C
22.36
22.83
EC
8.19
8.19
HF
20.51
22.01
LE
8.74
8.74
RA
10.43
10.43
ZA
4.17
4.17
AB
19.44
5.98
17.36
6.69
9.33
3.46
5.30
5.30
5.30
5.30
5.30
FP L
U UY V
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
1.250
Key
1.36
2.75
1/4x1/4x2-1/4
7.20
11.30
1.375
1.51
2.75
SK 4282 V
- R 196 U - 184 TC 5.79
1.50
2.95
- R 196 U - 184 TC
- R 210 U - 213 TC
- 215 TC
- R 196 U - 182 TC
- 184 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
SK 5282 V - R 196 U - 182 TC
- 184 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
7.01
7.13
8.11
8.47
9.88
8.90
0.55
1.54
11.06
10.04
1.89
13.42
12.05
2.09
3.74
0.87
0.87
4.28
1.10
0.87
5.30
3.54
SK 3282 V - R 150 U - 145 TC 6.38
9.84
0.71
15.24
24.36
8.19
23.90
8.74
10.43
4.17
5.30
9.44
4.21
27.16
10.63
26.65 10.31 13.23
5.51
7.40
17.87
11.44
25.00
26.53
28.92
9.84
9.84
9.84
24.21 10.16 12.60
26.10 10.16 12.60
27.83 10.16 12.60
5.04
5.04
5.04
5.90
5.90
7.40
5.90
5.90
4.84
29.55
10.63
28.39 10.31 13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
31.95
12.44
31.42 12.36 15.59
6.34
9.70
13.30
18.20
20.75
12.99
30.47
9.84
30.51 10.16 12.60
5.04
5.90
5.90
8.50
8.50
12.30
14.00
5.75
31.10
10.63
31.06 10.31 13.23
5.51
7.40
7.40
8.50
14.00
5/16x5/16x2-1/8
7.20
11.30
1.875
2.09
3.50
8.50
14.00
1/2x1/2x2-3/4
10.30
10.30
15.60
16.70
8.50
8.50
12.30
14.00
2.250
2.47
4.00
1/2x1/2x3-1/4
10.30
10.30
15.60
16.70
33.50
12.44
34.09 12.36 15.59
6.34
9.70
13.30
18.20
2.500
2.77
5/8x5/8x4
5.00
- R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
34.41
14.09
36.30 13.58 16.50
7.01
9.70
13.30
20.00
37.44
16.30
40.59 16.81 19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
37.44
16.30
40.59 16.81 19.53
8.27
12.05
15.67
27.09
C30
Technical design may be subject to change. DXF files available upon request.
www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
U -DESIGN, WITH HOLLOW SHAFT, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 1282 A
SK 2282 A
SK 3282 A
SK 5282 A
- R 100 U - 56 C
- 143 TC
- 145 TC
- R 150 U - 145 TC
- R 150 U - 145 TC
- R 196 U - 184 TC
- R 150 U - 145 TC
- R 196 U - 184 TC
- R 210 U - 213 TC
- 215 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
- R 196 U - 182 TC
- 184 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
AD
4.53
4.96
6.38
SK 4282 A - R 196 U - 182 TC
- 184 TC 7.13
8.47
DB
DF
D1
4.80
6.50
6.22
5.79
8.31
7.48
GE
GF
H2
1.34
0.55
0.43
1.50
0.63
0.55
O
QA
SA
10.98
4.45
3.03
13.27
5.16
3.54
C EC HF LE RA ZA AB
22.25
9.84
24.21 10.16 12.60
5.04
5.90
7.01
1.54
15.24
20.86
8.19
23.90
8.74
10.43
4.17
5.30
9.84
8.90
8.11
11.06
10.04
9.88
13.42
0.71
0.55
1.89
0.87
0.87
2.09
1.10
12.05
0.87
5.94
4.21
17.87
7.44
16.69
5.98
17.36
6.69
9.33
3.46
5.30
19.61
20.08
23.03
23.66
24.92
8.19
8.19
9.84
10.63
9.84
20.51
22.01
8.74
8.74
10.43
10.43
26.10 10.16 12.60
26.65 10.31 13.23
27.83 10.16 12.60
4.17
4.17
5.04
5.51
5.04
5.30
5.30
5.30
5.30
5.90
7.40
7.40
5.90
5.90
FP
7.20
7.20
7.20
L
9.30
10.30
11.30
7.20
11.30
ADH
DH
LH
UH
UYH
Key
1.57
X
X1
4.80
0.12
1.77
1.188
1.31
0.16
1/4x1/4x3-1/4
7.20
11.30
5.47
1.97
8.50
14.00
1.97
1.438
1.61
0.31
0.20
3/8x3/8x3-1/4
7.20
11.30
6.85
2.28
0.24
8.50
14.00
2.17
1.625
0.24
10.30
10.30
8.50
8.50
15.60
16.70
12.30
14.00
7.68
2.76
1.73
3/8x1/4x4
2.56
2.062
2.23
0.28
0.28
4.84
25.55
10.63
28.39 10.31 13.23
5.51
7.40
7.40
20.75
7.99
10.30
10.30
15.60
16.70
27.95
12.44
31.42 12.36 15.59
6.34
9.70
13.30
18.20
25.47
9.84
30.51 10.16 12.60
5.04
5.90
5.90
8.50
8.50
12.30
14.00
5.75
26.10
10.63
31.06 10.31 13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
28.50
12.44
34.09 12.36 15.59
6.34
9.70
13.30
18.20
1/2x3/8x5-1/4
9.06
3.35
2.95
2.438
2.71
5/8x5/8x7
0.30
0.30
- R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
29.41
14.09
36.30 13.58 16.50
7.01
9.70
13.30
20.00
32.44
16.30
40.59 16.81 19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
32.44
16.30
40.59 16.81 19.53
8.27
12.05
15.67
27.09
www.nord.com
Technical design may be subject to change. DXF files available upon request.
C31
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
U -DESIGN, WITH SOLID SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AD DF
D1
GE DB
10.75
14.06
13.78
GF
H2
N
1.38
1.02
11.06
2.78
5.83
O
QA
SA
22.79
15.78
C EC HF LE RA ZA AB
33.26
9.84
32.71 10.16
12.60
5.04
5.90
5.90
FP
8.50
8.50
L
12.30
14.00
6.77
33.89
10.63
33.26 10.31
13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
36.29
12.44
36.29 12.36
15.59
6.34
9.70
13.30
18.20
U UY V
Key
3.000
3.33
5.50
SK 6382 V - R 196 U - 182 TC
- 184 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
3/4 x 3/4 x 4-1/2
- R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC 11.06
13.78
2.78
1.02
5.83
16.80
6.77
37.20
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00
- R 300 U - 284 TC
- 286 TC
40.23
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
- R 350 U - 200 L 40.23
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
SK 6282 V - R 280 U - 256 TC 10.75
14.06
1.38
22.79
39.99
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00
3.000
3.33
5.50
43.02
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
3/4 x 3/4 x 4-1/2
- R 350 U - 200 L
- R 210 U - 213 TC
- 215 TC 12.44
16.14
2.76
1.02
6.99
18.76
7.76
43.02
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
- R 375 U - 225 S
- 225 M
49.16
19.69
48.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
- R 400 U - 250 M 49.16
19.69
48.38 20.71
22.44
9.45
16.93
20.47
31.10
SK 7382 V - R 196 U - 184 TC 11.73
15.71
1.38
25.12
36.24
9.84
35.08 10.16
12.60
5.04
5.90
8.50
14.00
3.500
3.88
6.75
36.87
10.63
35.63 10.31
13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
7/8 x 7/8 x 5-1/2
- R 250 U - 254 TC 41.04
12.44
38.66 12.36
15.59
6.34
9.70
13.30
18.20
41.95
14.09
40.87 13.58
16.50
7.01
9.70
13.30
20.00
- R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
44.98
16.30
45.16 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
44.98
16.30
45.16 16.81
19.53
8.27
12.05
15.67
27.09
- R 375 U - 225 S
- 225 M
51.12
19.69
50.75 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
- R 400 U - 250 M
SK 7282 V - R 350 U - 200 L 11.73
- R 375 U - 225 S
- 225 M 12.44
15.71
16.14
2.76
1.38
1.02
6.99
25.44
18.48
7.76
51.12
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
44.70
50.84
16.30
19.69
45.16 16.81
50.75 20.71
19.53
22.44
8.27
9.45
12.05
12.05
12.05
15.67
15.67
15.67
27.09
27.09
27.09
3.500
3.88
6.75
7/8 x 7/8 x 5-1/2
- R 400 U - 250 M 50.84
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
Technical design may be subject to change. DXF files available upon request.
C32 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
U -DESIGN, WITH HOLLOW SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AD
DB
SK 6382 A - R 196 U - 182 TC
- 184 TC 10.75
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
- R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
SK 6282 A - R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
DF
D1
GE
11.06
14.06
GF
H2
2.78
1.38
13.78
1.02
O
QA
SA
C
22.79
10.28
27.76
9.84
32.71 10.16
12.60
5.04
5.90
5.90
6.77
28.39
10.63
33.26 10.31
13.23
5.51
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
30.79
12.44
36.29 12.36
15.59
6.34
9.70
13.30
18.20
37.52
EC
16.30
HF LE
42.79 16.81
RA
19.53
ZA
8.27
AB
12.05
43.66
19.69
48.38 20.71
22.44
9.45
12.05
12.05
FP
15.67
15.67
15.67
L
27.09
27.09
27.09
43.66
19.69
48.38 20.71
22.44
9.45
16.93
20.47
31.10
ADH
DH
11.42
3.94
LH
UH
UYH
Key
3.54
2.750
3.03
5/8 x 5/8 x 8
31.70
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00
34.73
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
34.73
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
11.06
2.78
22.79
34.49
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00 11.42
3.54
10.75
14.06
13.78
1.38
1.02
11.30
6.77
37.52
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
3.94
2.750
3.03
5/8 x 5/8 x 8
X
X1
0.33
0.33
0.33
0.33
- R 400 U - 250 M
SK 7382 A - R 196 U - 184 TC
- R 210 U - 213 TC
- 215 TC
- R 250 U - 254 TC
- R 280 U - 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 7282 A - R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
12.44
11.73
15.71
16.14
2.76
1.38
1.02
25.12
12.01
7.76
29.49
30.12
34.29
35.20
14.09
40.87 13.58
16.50
7.01
9.70
13.30
20.00
38.23
16.30
45.16 16.81
19.53
8.27
12.70
12.70
38.23
9.84
10.63
12.44
16.30
35.08 10.16
35.63 10.31
38.66 12.36
45.16 16.81
12.60
13.23
15.59
19.53
5.04
5.51
6.34
8.27
5.90
7.40
7.40
9.70
12.05
44.37
19.69
50.75 20.71
22.44
9.45
12.05
12.05
8.50
10.30
10.30
13.30
15.20
15.20
15.67
15.67
15.67
14.00 12.20
15.60
16.70
18.20
20.30
21.80
27.09
27.09
27.09
4.33
3.94
3.188
3.40
0.24
0.24
3/4 x 1/2 x 9-1/2
44.37
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
12.44
2.76
25.44
37.95
16.30
45.16 16.81
19.53
8.27
12.05
15.67
27.09 12.20
3.94
11.73
15.71
16.14
1.38
1.02
11.73
7.76
44.09
19.69
50.75 20.71
22.44
9.45
12.05
12.05
44.09
19.69
50.75 20.71
22.44
9.45
16.93
15.67
15.67
20.47
27.09
27.09
31.10
4.33
3.188
3.40
0.24
0.24
3/4 x 1/2 x 9-1/2
Technical design may be subject to change. DXF files available upon request.
www.nord.com
C33
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
U -DESIGN, WITH SOLID SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 8382 V
SK 8282 V
- R 210 U - 213 TC
- 215 TC
- R 280 U - 254 TC
- 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
- R 350 U - 200 L
SK 8282 V - R 375 U - 225 S
- 225 M
- R 400 U - 250 M
- R 500 U - 280 S
- 280 M
- 315 S
SK 9382 V - R 300 U - 256 TC
- 284 TC
- 286 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 9282 V - R 375 U - 225 S
- 225 M
- R 400 U - 250 M
- R 500 U - 280 S
- 280 M
- 315 S
AD DF
D1
GE DB
13.86
18.31
18.50
GF
H2
N
1.97
1.22
14.17
3.27
8.78
O
QA
SA
28.74
22.08
C EC HF LE RA ZA AB
40.19
10.63
37.87 10.31
13.23
5.51
7.40
7.40
8.66
45.27
14.09
43.50 13.58
16.50
7.01
9.70
9.70
48.30
16.30
47.79 16.81
19.53
8.27
12.70
12.70
FP
10.30
10.30
13.30
13.30
15.20
15.20
L
15.60
16.70
18.20
20.00
20.30
21.80
48.30
16.30
47.79 16.81
19.53
8.27
12.05
15.67
27.09
54.44
19.69
53.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
54.44
19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
U
4.250
UY
Key
4.69
8.50
1 x 1 x 7-1/4
V
13.86
18.31
18.50
3.27
14.17
13.86
18.31
18.50
1.97
1.22
8.78
1.97
1.22
14.17
3.27
8.78
16.14
18,27
22.99
24.02
3,70
2.17
1.22
10,23
28.74
22.08
8.66
28.74
22.71
50.90
16.30
47.79 16.81
19.53
8.27
12.05
54.44
19.69
53.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
15.67
27.09
27.09
27.09
8.66
54.44
19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
57.59
19.69
71.22 35.20
25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
36.97
24.72
11,61
50.94
16.30
54.84 16.81
19.53
8.27
9,70
12.70
12.70
13,30
15.20
15.20
20,00
20.30
21.80
50.94
16.30
54.84 16.81
19.53
8.27
12.05
15.67
27.09
57.08
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
4.250
4.69
8.50
1 x 1 x 7-1/4
4.250
4.69
8.50
1 x 1 x 7-1/4
5.250
5.80
9.84
1-1/4 x 1-1/4 x 8-3/8
16.14
22.99
24.02
2.17
1.22
36.97
24.72
57.08
19.69
60.43 20.71
22.44
9.45
19.63
20.47
31.10
57.04
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
18.27
3.70
10.23
11.61
57.04
19.69
60.43 20.71
22.44
9.45
16.93
20.47
31.10
60.19
19.69
78.27 35.20
25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
5.250
5.80
9.84
1-1/4 x 1-1/4 x 8-3/8
Technical design may be subject to change. DXF files available upon request.
C34 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
U -DESIGN, WITH HOLLOW SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 8382 A - R 210 U - 213 TC
- 215 TC 13.86
- R 280 U - 254 TC
- 256 TC
- R 300 U - 284 TC
- 286 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 8282 A - R 350 U - 200 L
13.86
SK 8282 A - R 375 U - 225 S
- 225 M
- R 400 U - 250 M
- R 500 U - 280 S
- 280 M
- 315 S
SK 9382 A - R 300 U - 256 TC
- 284 TC
- 286 TC
- R 350 U - 200 L
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
SK 9282 A - R 375 U - 225 S
- 225 M
- R 400 U - 250 M
- R 500 U - 280 S
- 280 M
- 315 S
AD
13.86
16.14
16.14
DB
DF
D1
14.17
18.31
14.17
18.31
18.50
GE
GF
H2
3.27
1.97
18.50
1.22
3.27
1.97
1.22
14.17
18.31
3.27
1.97
18.50
1.22
O
QA
SA
C EC HF LE RA ZA AB
28.74
13.58
31.69
10.63
37.87 10.31
13.23
5.51
7.40
7.40
8.66
36.77
14.09
43.50 13.58
16.50
7.01
9.70
9.70
39.80
16.30
47.79 16.81
19.53
8.27
12.70
12.70
FP
10.30
10.30
13.30
13.0
15.20
15.20
L
15.60
16.70
18.20
20.00
20.30
21.80
ADH
DH
14.41
5.12
LH
UH
UYH
Key
4.65
4.062
4.25
1 x 1/2 x 12
X
X1
0.28
0.28
39.80
16.30
47.79 16.81
19.53
8.27
12.05
15.67
27.09
45.94
19.69
53.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
28.74
13.58
8.66
28.74
14.21
45.94
19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
42.40
16.30
47.79 16.81
19.53
8.27
12.05
15.67
27.09 14.41
5.12
4.65
4.062
4.25
1 x 1/2 x 12
0.28
0.28
45.94
19.69
53.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
8.66
45.94
19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
14.41
5.12
4.65
4.062
4.25
0.28
0.28
18.27
22.99
24,02
3.70
2.17
1,22
36.97
14.88
11,61
49.09
19.69
71.22 35.20
25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
41.10
16.30
54.84 16.81
19.53
8.27
9,70
12.70
12.70
13,30
15.20
15.20
20,00
20.30
21.80
41.10
16.30
54.84 16.81
19.53
8.27
12.05
15.67
27.09
47.24
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
47.24
19.69
60.43 20.71
22.44
9.45
19.63
20.47
31.10
18.27
22.99
3.70
2.17
36.97
15.47
47.20
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
24.02
1.22
11.61
47.20
19.69
60.43 20.71
22.44
9.45
16.93
20.47
31.10
50.35
19.69
78.27 35.20
25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
6.30
1 x 1/2 x 12
16.93
6.30
16.93
6.50
4.750
5,11
1-1/4 x 7/8 x 14
6.50
4.750
5.11
0.39
0.39
0.39
0.39
1-1/4 x 7/8 x 14
Technical design may be subject to change. DXF files available upon request.
www.nord.com
C35
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
Z -DESIGN, WITH SOLID SHAFT, DOUBLE REDUCTION
Gear reducer dimensions
Type
SK 1282 V - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 2282 V - R 100 Z - 56 C
- 143 TC
- 145 TC
AD
DB
4.53
4.80
4.96
5.79
DF
D1
GE
6.50
6.22
1.34
8.31
7.48
1.50
0.63
0.55
2.95
- R 150 Z - 145 TC
- R 196 Z - 184 TC
SK 3282 V - R 100 Z - 56 C
- 143 TC
- 145 TC
6.38
9.84
8.90
9.84
8.90
- R 150 Z - 145 TC 7.01
1.54
3.74
- R 196 Z - 184 TC
GF
H2
N
0.55
0.43
2.90
Outline dimensions Motor dimensions
O
QA
SA
10.98
7.20
3.03
13.27
7.91
3.54
C EC HF LE RA ZA AB
22.88
23.88
24.88
5.98
17.36
6.69
9.33
3.46
5.30
5.30
5.30
27.40
8.19
20.51
8.74
10.43
4.17
5.30
23.59
24.59
25.59
5.98
18.86
6.69
9.33
3.46
5.30
5.30
5.30
27.87
8.19
22.01
8.74
10.43
4.17
5.30
15.24
9.44
31.44
9.84
24.21 10.16 12.60
5.04
5.90
26.69
27.69
28.69
5.98
20.75
6.69
9.33
3.46
5.30
5.30
5.30
4.21
29.40
8.19
23.90
8.74
10.43
4.17
5.30
32.97
9.84
26.10 10.16 12.60
5.04
5.90
FP L
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
8.50
14.00
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
8.50
14.00
SK 4282 V
- R 210 Z - 213 TC
- 215 TC
- R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
SK 5282 V - R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
7.13
11.06
10.04
0.87
0.87
8.11
1.89
4.28
8.47
13.42
12.05
1.10
0.87
9.88
2.09
5.30
Shaft dimensions
U
1.250
1/4x1/4x2-1/4
1.375
V
2.75
5/16x5/16x2-1/8
1.875
UY
Key
1.36
1.51
2.09
3.50
1/2x1/2x2-3/4
35.04
36.14
10.63
26.65 10.31 13.23
5.51
7.40
7.40
31.80
8.19
25.63
8.74
10.43
4.17
5.30
10.30
10.30
15.60
16.70
7.20
11.30
2.250
2.47
17.87
11.44
33.66
35.36
4.84
37.43
38.53
9.84
10.63
27.83 10.16 12.60
28.39 10.31 13.23
5.04
5.51
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
40.90
12.44
31.42 12.36 15.59
6.34
9.70
13.30
18.20
4.00
1/2x1/2x3-1/4
20.75
12.99
33.35
35.21
36.91
5.75
38.98
40.08
8.19
9.84
10.63
28.31
8.74
10.43
30.51 10.16 12.60
31.06 10.31 13.23
4.17
5.04
5.51
5.30
5.90
5.90
7.40
7.40
7.20
11.30
2.500
2.77
8.50
8.50
12.30
14.00
10.30
10.30
15.60
16.70
42.45
12.44
34.09 12.36 15.59
6.34
9.70
13.30
18.20
5/8x5/8x4
44.92
46.48
47.98
14.09
16.30
36.30 13.58 16.50
40.59 16.81 19.53
7.01
8.27
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
53.27
16.30
40.59 16.81 19.53
8.27
12.05
15.67
27.09
2.75
5.00
Technical design may be subject to change. DXF files available upon request.
C36 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
Z -DESIGN, WITH HOLLOW SHAFT, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 1282 A - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 2282 A - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 196 Z - 184 TC
SK 3282 A - R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC
SK 4282 A - R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
SK 5282 A - R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
AD
4.53
4.96
DB
DF
D1
4.80
6.50
6.22
5.79
8.31
7.48
GE
GF
H2
1.34
0.55
0.43
1.50
0.63
0.55
O
QA
SA
10.98
4.45
3.03
13.27
5.16
3.54
C EC HF LE RA ZA AB
20.13
21.13
22.13
5.98
17.36
6.69
9.33
3.46
5.30
5.30
5.30
24.65
8.19
20.51
8.74
10.43
4.17
5.30
20.84
21.84
22.84
5.98
18.86
6.69
9.33
3.46
5.30
5.30
5.30
FP L
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
7.20
7.20
7.20
9.30
10.30
11.30
ADH
DH
LH
UH
UYH
Key
1.57
X
X1
4.80
0.12
1.77
1.188
1.31
0.16
1/4x1/4x3-1/4
5.47
1.97
1.97
1.438
1.61
0.31
0.20
6.38
7.01
9.84
8.90
1.54
0.71
0.55
15.24
5.94
4.21
25.12
28.69
23.19
24.19
25.19
8.19
9.84
5.98
22.01
24.21 10.16 12.60
20.75
8.74
6.69
10.43
9.33
4.17
5.04
3.46
5.30
5.90
5.30
5.30
5.30
25.90
8.19
23.90
8.74
10.43
4.17
5.30
29.47
9.84
26.10 10.16 12.60
5.04
5.90
31.54
32.64
10.63
26.65 10.31 13.23
5.51
7.40
7.40
8.11
1.89
17.87
27.80
8.19
25.63
8.74
10.43
4.17
5.30
7.13
11.06
10.04
0.87
0.87
7.44
4.84
7.20
11.30
8.50
14.00
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
8.50
10.30
10.30
14.00
15.60
16.70
3/8x3/8x3-1/4
6.85
2.17
2.28
1.625
1.73
3/8x1/4x4
7.20
11.30
7.68
2.56
29.66
31.36
33.43
34.53
9.84
10.63
27.83 10.16 12.60
28.39 10.31 13.23
5.04
5.51
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
36.90
12.44
31.42 12.36 15.59
6.34
9.70
13.30
18.20
2.76
2.062
2.23
0.24
0.24
0.28
0.28
1/2x3/8x5-1/4
9.88
2.09
20.75
28.35
8.19
28.31
8.74
10.43
4.17
5.30
8.47
13.42
12.05
1.10
0.87
7.99
5.75
30.21
31.91
9.84
30.51 10.16 12.60
5.04
5.90
5.90
7.20
11.30
9.06
2.95
8.50
8.50
12.30
14.00
3.35
2.438
2.71
33.98
35.08
10.63
31.06 10.31 13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
37.45
12.44
34.09 12.36 15.59
6.34
9.70
13.30
18.20
39.92
14.09
36.30 13.58 16.50
7.01
9.70
13.30
20.00
41.48
42.98
16.30
40.59 16.81 19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
48.27
16.30
40.59 16.81 19.53
8.27
12.05
15.67
27.09
5/8x5/8x7
0.30
0.30
Technical design may be subject to change. DXF files available upon request.
www.nord.com
C37
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
Z -DESIGN, WITH SOLID SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 6382 V - R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC 11.06
- R 210 Z - 213 TC
- 215 TC
AD DF
D1
GE
GF
H2
N
O
QA
SA
C EC HF LE RA ZA AB FP L
U UY
DB Key
10.75
14.06
1.38
22.79
36.14
8.19
30.51
8.74
10.43
4.17
5.30
7.20
11.30 3.000
3.33
13.78
2.78
1.02
5.83
15.78
6.77
38.00
39.70
41.77
42.87
9.84
10.63
32.71 10.16
33.26 10.31
12.60
13.23
5.04
5.51
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
V
5.50
3/4 x 3/4 x 4-1/2
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
45.24
12.44
36.29 12.36
15.59
6.34
9.70
13.30
18.20
47.71
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00
49.27
50.77
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
56.06
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
SK 6282 V - R 280 Z - 256 TC 10.75
14.06
1.38
22.79
50.50
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00
3.000
3.33
5.50
- R 300 Z - 284 TC
- 286 TC 11.06
13.78
2.78
1.02
5.83
16.80
6.77
52.06
53.56
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
3/4 x 3/4 x 4-1/2
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
58.85
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
63.26
63.26
19.69
48.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
67.27
19.69
48.38 20.71
22.44
9.45
16.93
20.47
31.10
SK 7382 V - R 196 Z - 184 TC 11.73
15.71
1.38
25.12
42.68
9.84
35.08 10.16
12.60
5.04
5.90
8.50
14.00
3.500
3.88
6.75
16.14
2.76
1.02
6.99
18.76
7.76
7/8 x 7/8 x 5-1/2
- R 210 Z - 213 TC
- 215 TC 12.44
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
44.75
45.85
10.63
35.63 10.31
13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
49.99
12.44
38.66 12.36
15.59
6.34
9.70
13.30
18.20
52.46
14.09
40.87 13.58
16.50
7.01
9.70
13.30
20.00
54.02
55.52
16.30
45.16 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
60.81
16.30
45.16 16.81
19.53
8.27
12.05
15.67
27.09
65.22
65.22
19.69
50.75 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
69.23
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
SK 7282 V
- R 400 Z - 250 M
- R 350 Z - 200 L 11.73
15.71
1.38
25.44
60.53
16.30
45.16 16.81
19.53
8.27
12.05
15.67
27.09
3.500
3.88
6.75
- R 375 Z - 225 S
- 225 M 12.44
16.14
2.76
1.02
6.99
18.48
7.76
64.94
64.94
19.69
50.75 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
7/8 x 7/8 x 5-1/2
- R 400 Z - 250 M 68.95
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
Technical design may be subject to change. DXF files available upon request.
C38 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
Z -DESIGN, WITH HOLLOW SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 6382 A - R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
SK 6282 A - R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 7382 A - R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 7282 A - R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
AD
DB
DF
D1
GE
GF
H2
O
QA
SA
C EC HF LE RA ZA AB FP L
ADH
DH
LH
UH
UYH
Key
11.06
2.78
22.79
30.64
8.19
30.51
8.74
10.43
4.17
5.30
7.20
11.30 11.42
3.54
10.75
14.06
13.78
1.38
1.02
10.28
6.77
32.50
34.20
36.27
37.37
9.84
10.63
32.71 10.16
33.26 10.31
12.60
13.23
5.04
5.51
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
3.94 2.750
3.03
5/8 x 5/8 x 8
X
X1
0.33
0.33
39.74
12.44
36.29 12.36
15.59
6.34
9.70
13.30
18.20
42.21
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00
43.77
45.27
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
50.56
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
11.06
2.78
22.79
45.00
14.09
38.50 13.58
16.50
7.01
9.70
13.30
20.00 11.42
3.54
10.75
14.06
13.78
1.38
1.02
11.30
6.77
46.56
48.06
16.30
42.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
53.35
16.30
42.79 16.81
19.53
8.27
12.05
15.67
27.09
57.76
57.76
19.69
48.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
3.94
2.750
3.03
5/8 x 5/8 x 8
0.33
0.33
61.77
19.69
48.38 20.71
22.44
9.45
16.93
20.47
31.10
12.44
2.76
25.12
35.93
9.84
35.08 10.16
12.60
5.04
5.90
8.50
14.00 12.20
3.94
11.73
15.71
16.14
1.38
1.02
12.01
7.76
38.00
39.10
10.63
35.63 10.31
13.23
5.51
7.40
7.40
10.30
10.30
15.60
16.70
43.24
12.44
38.66 12.36
15.59
6.34
9.70
13.30
18.20
45.71
14.09
40.87 13.58
16.50
7.01
9.70
13.30
20.00
4.33
3.188
3.40
0.24
0.24
3/4 x 1/2 x 9-1/2
47.27
48.77
16.30
45.16 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
54.06
16.30
45.16 16.81
19.53
8.27
12.05
15.67
27.09
11.73
58.47
58.47
19.69
50.75 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
62.48
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
12.44
2.76
25.44
53.78
16.30
45.16 16.81
19.53
8.27
12.05
15.67
27.09 12.20
3.94
15.71
16.14
1.38
1.02
11.73
7.76
58.19
58.19
19.69
50.75 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
62.20
19.69
50.75 20.71
22.44
9.45
16.93
20.47
31.10
0.24
4.33
3.188
3.40
0.24
3/4 x 1/2 x 9-1/2
Technical design may be subject to change. DXF files available upon request.
www.nord.com
C39
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
Z -DESIGN, WITH SOLID SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AD DF
D1
GE
GF
H2
N
O
QA
SA
C EC HF LE RA ZA AB FP L
U UY V
DB Key
13.86
18.31
1.97
27.74
46.00
9.84
37.71 10.16
12.60
5.04
5.90
8.50
14.00 4.250
4.69
8.50
SK 8382 V - R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC 14.17
- R 250 Z - 254 TC
18.50
3.27
1.22
8.78
22.08
8.66
48.07
49.17
53.31
10.63
12.44
37.87 10.31
42.28 12.36
13.23
15.59
5.51
6.34
7.40
7.40
9.70
10.30
10.30
13.30
15.60
16.70
18.20
1 x 1 x 7-1/4
- R 280 Z - 254 TC
- 256 TC
53.98
55.78
14.09
43.50 13.58
16.50
7.01
9.70
9.70
13.30
13.30
18.20
20.00
- R 300 Z - 284 TC
- 286 TC
57.34
58.84
16.30
47.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
64.13
68.54
68.54
72.55
16.30
19.69
19.69
47.79 16.81
53.38 20.71
53.38 20.71
19.53
22.44
22.44
8.27
9.45
9.45
12.05
12.05
12.05
19.63
15.67
15.67
15.67
20.47
27.09
27.09
27.09
31.10
SK 8282 V - R 350 Z - 200 L
SK 8282 V - R 375 Z - 225 S
- 225 M
- R 500 Z - 280 S
- 280 M
- 315 S
13,86
14,17
.31
18.50
3.27
13.86
18.31
18.50
1.97
1.22
8.78
1.97
1.22
28.74
22.08
8.66
28.74
22.71
6.73
68.54
68.54
16.30
47.79 16.81
19.53
8.27
12.05
19.69
53.38 20.71
22.44
9.45
12.05
12.05
15.67
15.67
15.67
27.09
27.09
27.09
4.250
4.69
8.50
1 x 1 x 7-1/4
4.250
4.69
8.50
- R 400 Z - 250 M 14.17
3.27
8.78
8.66
72.55
19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
16.14
22.99
24.02
2.17
1.22
36.97
24.72
78.23
78.23
82.36
50.71
51.81
19.69
10.63
71.22 35.20
45.31 10.31
25.24 11.81 17.91
13.23
5.51
17.91
20.28
7.40
7.40
22.64
22.64
25.39
10.30
10.30
34.06
34.06
38.19
15.60
16.70
1 x 1 x 7-1/4
SK 9382 V - R 210 Z - 213 TC
- 215 TC
5.250
5.80
9.84
- R 250 Z - 254 TC 18.27
3.70
10.23
11.61
55.95
12.44
48.34 12.36
15.59
6.34
9.70
13.30
18.20
- R 280 Z - 256 TC 58.42
14.09
50.55 13.58
16.50
7.01
9.70
13.30
20.00
1-1/4 x 1-1/4 x 8-3/8
- R 300 Z - 256 TC
- 284 TC
- 286 TC
59.68
59.68
61.48
16.30
54.84 16.81
19.53
8.27
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 9282 V - R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
- R 500 Z - 280 S
- 280 M
- 315 S
66.77
16.30
54.84 16.81
19.53
8.27
12.05
15.67
27.09
71.18
71.18
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
75.19
19.69
60.43 20.71
22.44
9.45
19.63
20.47
31.10
16.14
22.99
24.02
2.17
1.22
36.97
24.72
71.14
71.14
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
18.27
3.70
10.23
11.61
75.15
19.69
60.43 20.71
22.44
9.45
16.93
20.47
31.10
80.83
80.83
84.96
19.69
78.27 35.20
25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
5.250
5.80
9.84
1-1/4 x 1-1/4 x 8-3/8
Technical design may be subject to change. DXF files available upon request.
C40 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
Z -DESIGN, WITH HOLLOW SHAFT, DOUBLE AND TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 8382 A - R 196 Z - 184 TC
AD
- R 210 Z - 213 TC
- 215 TC 13.86
- R 250 Z - 254 TC
- R 280 Z - 254 TC
- 256 TC
- R 300 Z - 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 8282 A - R 350 Z - 200 L
13.86
SK 8282 A - R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
13.86
- R 500 Z - 280 S
- 280 M
- 315 S
SK 9382 A - R 210 Z - 213 TC
- 215 TC 16.14
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
SK 9282 A - R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
- R 500 Z - 280 S
- 280 M
- 315 S
16.14
DB
DF
D1
14.17
18.31
18.50
GE
GF
H2
3.27
1.97
1.22
14.17
18.31
18.50
14.17
18.31
3.27
1.97
1.22
3.27
1.97
18.50
1.22
O
QA
SA
28.74
13.58
C
37,50
39,57
40,67
EC
9,84
HF LE
37,71 10,16
RA
12,60
ZA
5,04
AB
5,90
10.63
37.87 10.31
13.23
5.51
7.40
7.40
FP L
ADH
DH
LH
UH
UYH
Key
8,50 14,00 14,41 4,65
10.30
10.30
15.60
16.70
44,81 12,44 42,28 12,36 15,59 6,34 9,70 13,30 18,20
8.66
45,48
47,28
14.09
43.50 13.58
16.50
7.01
9.70
9.70
13.30
13.0
18.20
20.00
5.12 4.062
4,25
1 x 1/2 x 12
X
X1
0,28
0.28
28.74
13.58
8.66
28.74
14.21
48,84
50,34
16.30
47.79 16.81
19.53
8.27
12.70
12.70
15.20
15.20
20.30
21.80
55,63 16.30
47.79 16.81
19.53
8.27
12.05
15.67
27.09
60,04
60,04
19.69
53.38 20.71
22.44
9.45
12.05
12.05
Technical design may be subject to change. DXF files available upon request.
15.67
15.67
27.09
27.09
64,05 19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
58,23
60,04
60,04
16.30
19.69
47.79 16.81
53.38 20.71
19.53
22.44
8.27
9.45
12.05
12.05
12.05
15.67
15.67
15.67
27.09 14.41
27.09
27.09
8.66
64.05
19.69
53.38 20.71
22.44
9.45
19.63
20.47
31.10
18.27
22.99
3.70
2.17
36.97
14.88
69.73
69.73
73.86
40.87
41.97
19.69
71.22 35.20
25.24 11.81 17.91
17.91
20.28
10.63
45.31 10.31
13.23
5.51
7.40
7.40
22.64
22.64
25.39
10.30
10.30
34.06
34.06
38.19
15.60
16.70
24.02
1.22
11.61
46.11
12.44
48.34 12.36
15.59
6.34
9.70
13.30
18.20
48.58
14.09
50.55 13.58
16.50
7.01
9.70
13.30
20.00
49.84
50.14
51.64
16.30
54.84 16.81
19.53
8.27
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
56.93
16.30
54.84 16.81
19.53
8.27
12.05
15.67
27.09
61.34
61.34
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
65.35
19.69
60.43 20.71
22.44
9.45
19.63
20.47
31.10
18.27
22.99
3.70
2.17
36.97
15.47
61.30
61.30
19.69
60.43 20.71
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
24.02
1.22
11.61
65.31
19.69
60.43 20.71
22.44
9.45
16.93
20.47
31.10
70.99
70.99
75.12
19.69
78.27 35.20
25.24 11.81 17.91
17.91
20.28
22.64
22.64
25.39
34.06
34.06
38.19
5.12
1 x 1/2 x 12
16.93
6.30
16.93
6.30
4.65
4.062
4.25
6.50
4.750
5.11
1-1/4 x 7/8 x 14
6.50
4.750
5.11
0.28
0.28
0.39
0.39
0.39
0.39
1-1/4 x 7/8 x 14 www.nord.com
C41
NOTES
C42 www.nord.com
VARIABLE SPEED HELICAL BEVEL GEARED MOTORS www.nord.com
D1
VARIABLE SPEED HELICAL BEVEL GEARED MOTORS
MOUTING POSITIONS
GEAR TYPE
FOOT MOUNTED EXECUTION, SOLID SHAFT
SK 9012 - SK 9092 = Helical Bevel Gearboxes, triple reduction
SHAFT MOUNTED EXECUTION, HOLLOW SHAFT
SK 9012 AZ - SK 9092 AZ = Helical Bevel Gearboxes, triple reduction
FLANGE MOUNTED EXECUTION, SOLID SHAFT, FLANGE B5
SK 9012 VF - SK 9092 VF = Helical Bevel Gearboxes, triple reduction
HELICAL-BEVEL GEAR UNITS - OPTIONS see catalog 1000
VARIABLE SPEED TYPE
R 080 U
R 100 U
R 150 U
R 196 U
R 210 U
R 250 U
R 280 U Variable speed drives U design
R 300 U
R 350 U
R 375 U
R 400 U
R 500 U
R 080 Z
R 100 Z
R 150 Z
R 196 Z
R 210 Z
R 250 Z
R 280 Z Variable speed drives Z design
R 300 Z
R 350 Z
R 375 Z
R 400 Z
R 500 Z
STANDARD TYPE
Variable speed helical bevel geared motor
U - design (affix: U), with control gear type ZV
D2
Variable speed helical bevel geared motor
Z - design (affix: Z), with control gear type ZV www.nord.com
VARIABLE SPEED HELICAL BEVEL GEARED MOTORS
MOUTING POSITIONS
SPEED CONTROLS MOTOR
=
WST =
EMFST=
Speed control ZV C - face
1/3 - 30 HP
56 C - 286 TC
Angular control
Electromechanical remote control
IEC
40 - 150 HP
200 L/4 - 315 S/4
SPEED INDICATORS
BLA = Non contacting speed indicator, analogue
BLD = Non contacting speed indicator, digital
FAA = EMFST with remote speed indicator, analogue
FAD = EMFST with remote speed indicator, digital
MOTOR OPTIONS
BRE = with brake SR = Brake dust-proof
DG = Incremental encoder
HL = Brake motor with hand release TW = Thermal trip
R = Backstop WE = 2 nd motor shaft end
RG = Brake corrosion-protected
TF = Thermistor
EXAMPLE FOR ORDERING:
SK 9086 AF - R 300 Z - 286 TC
C - face motor / three phase 30 HP
Variable speed gear type, design Z
Helical Bevel Gear Motor, 3 reductions www.nord.com
D3
D4
Z
VARIABLE SPEED HELICAL BEVEL GEARED MOTORS
MOUTING POSITIONS
FOOT MOUNTED
Z
U
U
U
B 3 U (Z)
Z
B 6 I U (Z)
Symbols:
Vent plug
U Z
Z
B 6 U (Z) B 3 I U (Z)
Z
B 8 U (Z)
U
U Z
V 5 U (Z)
U
Z
B 8 I U (Z) B 6 II U (Z)
Drain plug Oil level
POSITION OF TERMINAL BOX AND CABLE ENTRY
Please specify position of terminal box and cable entry !
Normal design: 1/3 - 30 HP , Terminal box at 3 , Cable entry at I or III only.
40 - 150 HP , Terminal box at 1 , Cable entry at I.
If other position are required, please specify exactly when ordering.
2
I
III I
IV
II
1 3
I I
B A
U Z
V 5 I U (Z)
Mounting surface
U
In all mounting positions the variable speed drive may be mounted at an angle of 90
0
.
affix: */1 = right , */2 = left
B 3 U
1
B 3/2 U
I
I
1
1
I B 3/1 U www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
25
28
31
37
6.2
7.0
7.9
9.0
10.1
12.3
14.0
16
19
22
2.3
2.7
3.1
3.7
4.2
4.6
5.5
44
50
63
71
84
95
2.0
2.8
3.5
3.9
5.0
5.5
6.9
7.7
9.7
11.5
2.2
2.6
3.0
3.5
3.8
4.4
5.2
5.9
2.2
2.6
3.0
3.5
3.8
4.4
5.2
5.9
6.9
7.7
9.1
2.0
2.8
3.5
3.9
5.0
5.5
0.33
11.0
13.0
15.0
17
19
22
26
29
61
70
79
93
111
123
140
157
185
31
35
40
45
50
11.6
13.7
16
19
21
23
27
221
252
315
356
418
477
9.9
13.8
17
20
25
28
35
39
49
58
0.50
11.0
13.0
15.0
17
19
22
26
29
35
39
46
9.9
13.8
17
20
25
28
1708
1443
1239
1080
982
857
722
638
599
533
473
418
372
304
268
238
202
169
153
135
119
101
1611
1363
1195
1000
885
809
683
85.0
74.3
59.3
53.1
45.1
38.9
1903
1354
1071
956
754
678
541
484
386
325
2584
2186
1876
1646
1487
1301
1097
965
818
735
621
2876
2053
1628
1443
1142
1027
10620
10921
9399
8213
7434
6487
5469
4832
4089
3673
3106
5310
6372
6372
5310
5310
5142
4.1
5.3
6.1
7.0
7.7
8.8
10.5
11.0
14.1
14.5
18.5
1.8
3.1
3.9
3.7
4.7
5.2
11.6
13.2
14.9
17.5
20.9
23.1
26.3
29.6
30.7
5.9
6.6
7.5
8.5
9.5
2.2
2.6
3.0
3.5
4.0
4.4
5.2
36.5
38.1
29.9
31.7
35.3
36.4
7.0
7.8
9.8
13.2
16.5
2.8
4.7
6.0
5.6
19.6
6.2
8.0
9.3
10.7
11.7
13.4
15.9
16.6
3000
2664
2363
2089
1859
1522
1336
1186
1009
845
764
671
596
506
3540
3540
3540
3540
3540
3540
3416
424
372
296
264
224
196
5310
6372
5363
4761
3770
3390
2708
2416
1929
1628
8523
7204
6204
5416
4903
4283
3611
3186
2.3
2.6
3.0
3.5
4.2
1.2
1.3
1.5
1.7
1.9
4.6
5.3
5.9
6.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
7.3
7.6
6.0
6.4
7.1
7.2
1.0
1.0
1.2
1.1
1.4
1.6
2.0
2.6
3.3
3.9
1.2
1.6
1.9
2.1
2.3
2.7
3.2
3.3
1.0
1.1
1.2
1.4
1.5
1.8
2.1
2.2
2.8
2.9
3.7
1.0
1.0
1.0
1.0
1.0
1.0
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
332.37
280.71
246.37
205.93
183.10
166.59
140.70
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
391.20
278.98
220.93
196.08
155.28
139.72
111.47
99.63
79.49
66.93
SK 9032 - R100 Z - 56 C
SK 9022 - R100 Z - 56 C
SK 9012 - R100 Z - 56 C
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
391.20
278.98
220.93
196.08
155.28
139.72
SK 9032 - R100 Z - 56 C
SK 9022 - R100 Z - 56 C
Weight approx.
[Lbs]
(460 V)
I
N
[A] i
Regel
183 0.8
5.00
130 0.8
5.00
112 0.8
5.00
183 1.1
5.00
130 1.1
5.00
D6 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
7.0
7.9
9.0
10.1
12.3
14.0
16
19
22
25
2.3
2.7
3.1
3.7
4.2
4.6
5.5
6.2
28
31
37
44
50
63
71
84
95
6.9
7.7
9.7
11.5
13.1
14.7
15.0
11.5
13.1
14.7
15.0
17
19
24
2.0
2.8
3.5
3.9
5.0
5.5
6.9
7.7
9.7
2.2
2.6
3.0
3.5
3.8
4.4
5.2
5.9
6.9
7.7
9.1
10.1
0.75
11.0
13.0
15.0
17
19
22
26
29
35
39
46
51
58
66
74
77
86
96
122
9.9
13.8
17
20
25
28
35
39
49
0.50
35
39
49
58
66
74
77
70
79
93
111
123
35
40
45
50
61
11.6
13.7
16
19
21
23
27
31
140
157
185
221
252
315
356
418
477
820
733
585
492
432
386
367
808
716
633
563
461
406
360
306
256
231
2443
2062
1814
1513
1345
1221
1035
912
204
181
153
128
112
90.3
79.7
68.1
59.3
738
648
579
551
497
443
349
4319
3080
2434
2159
1717
1540
1230
1097
877
3876
3275
2823
2460
2230
1947
1646
1451
1230
1097
929
841
8.6
9.8
11.0
11.6
12.8
14.4
18.3
1.2
2.1
2.6
2.5
3.1
3.4
4.3
5.8
7.3
2.7
3.5
4.1
9.4
9.7
12.4
13.7
4.7
5.2
5.9
7.0
7.3
3690
3239
2894
2752
2487
2213
1743
5310
6372
6372
5310
5310
5310
5310
5496
4390
10620
11505
11505
11505
11151
9735
8213
7248
6133
5505
4664
4204
8.7
9.8
11.6
13.8
15.3
4.4
4.9
5.6
6.3
7.7
1.4
1.7
2.0
2.3
2.6
2.9
3.4
3.9
17.4
19.6
20.2
24.1
25.2
19.6
21.1
23.4
23.9
6.5
8.7
10.9
12.9
14.8
16.5
17.3
3540
3540
3159
2814
2310
2027
1797
1531
1283
1159
3540
3540
3540
3540
3540
3540
3540
3540
1018
903
767
642
563
450
399
340
297
4098
3664
2921
2460
2159
1929
1841
1.7
2.0
2.3
2.8
3.1
1.0
1.0
1.1
1.3
1.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
3.5
3.9
4.0
4.8
5.0
3.9
4.2
4.7
4.8
1.3
1.7
2.2
2.6
3.0
3.3
3.5
111.47
99.63
79.49
66.93
58.70
52.42
49.94
332.37
280.71
246.37
205.93
183.10
166.59
140.70
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9022 - R100 Z - 56 C
SK 9012 - R100 Z - 56 C
1.7
2.0
2.2
2.3
2.6
2.9
3.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.5
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.5
1.9
1.9
2.5
2.7
391.20
278.98
220.93
196.08
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
31.62
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
SK 9032 - R100 Z - 56 C
SK 9022 - R100 Z - 56 C
Weight approx.
[Lbs]
(460 V)
I
N
[A] i
Regel
130 1.1
5.00
112 1.1
5.00
183 1.6
5.00
130 1.6
5.00
www.nord.com
D7
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
19
24
26
29
11.5
13.1
14.7
15.0
17
2.8
3.5
3.9
5.0
5.5
6.9
7.7
9.7
7.7
9.1
10.1
13.0
16
2.2
2.6
3.0
3.5
3.8
4.4
5.2
5.9
6.9
3.7
4.2
4.6
5.5
63
71
84
95
16
19
22
25
28
31
37
44
50
7.9
9.0
10.1
12.3
14.0
2.7
3.1
3.7
4.2
4.6
5.5
6.2
7.0
1.00
11.0
13.0
15.0
17
39
46
51
65
81
19
22
26
29
35
96
122
131
147
58
66
74
77
86
13.8
17
20
25
28
35
39
49
19
21
23
27
0.75
13.7
16
19
79
93
111
123
140
157
185
221
252
315
356
418
477
40
45
50
61
70
21
23
27
31
35
Weight approx.
[Lbs]
982
864
771
735
663
589
466
433
387
4106
3248
2885
2283
2053
1637
1469
1168
5160
4372
3761
3283
2974
2593
2186
1929
1637
1469
1239
1124
873
704
3027
2690
2451
2071
1071
947
844
692
609
540
459
384
347
305
271
230
193
169
3098
2717
2274
2018
1841
1549
1363
1212
135
119
102
89.4
10.8
13.7
14.7
16.5
6.5
7.4
8.3
8.7
9.6
1.6
2.0
1.8
2.3
2.6
3.2
4.3
5.5
7.2
9.3
10.2
13.2
16.3
3.9
4.4
5.3
5.5
7.0
2.1
2.6
3.1
3.5
1.2
1.3
1.4
1.7
4469
3921
3505
3336
3009
2682
2115
1965
1752
6372
6372
5310
5310
5310
5310
6372
5310
10620
11505
11505
11505
11505
11505
9947
8779
7425
6673
5646
5089
3965
3195
3540
3540
3540
3540
6.6
7.7
9.2
10.2
11.6
13.1
13.5
16.1
16.8
3.3
3.7
4.2
5.1
5.8
13.2
14.1
15.7
15.8
1.1
1.3
1.6
1.8
1.9
2.3
2.6
2.9
3540
3540
3540
3460
3044
2699
2301
1920
1735
1522
1354
1151
965
844
3540
3540
3540
3540
3540
3540
3540
3540
674
598
509
446
1.3
1.5
1.8
2.0
2.3
1.0
1.0
1.0
1.0
1.2
2.6
2.7
3.2
3.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.6
2.8
3.1
3.2
280.71
246.37
205.93
183.10
166.59
140.70
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9012 - R100 Z - 56 C
1.4
1.6
1.8
1.9
2.1
2.4
3.0
3.2
3.6
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.5
1.6
2.0
2.3
2.9
3.6
1.0
1.0
1.0
1.0
278.98
220.93
196.08
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
31.62
29.42
26.27
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
59.38
47.87
205.93
183.10
166.59
140.70
SK 9032 - R100 Z - 143 TC
SK 9022 - R100 Z - 143 TC
SK 9012 - R100 Z - 143 TC
112
196
143
126
(460 V)
I
N
[A]
1.6
2.1
2.1
2.1
i
Regel
5.00
5.00
5.00
5.00
D8 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
13.1
14.7
15.0
17
19
24
26
29
3.5
3.9
5.0
5.5
6.9
7.7
9.7
11.5
6.1
6.8
8.5
10.1
11.5
2.4
3.1
3.5
4.4
4.8
7.7
9.1
10.1
13.0
16
2.2
2.6
3.0
3.5
3.8
4.4
5.2
5.9
6.9
16
19
22
25
28
31
37
44
50
63
71
84
95
6.2
7.0
7.9
9.0
10.1
12.3
14.0
1292
1159
1106
991
884
697
650
580
4876
4328
3425
3080
2460
2195
1752
1478
5850
4629
4115
3257
2929
2336
2089
1664
1407
1230
7744
6549
5637
4929
4460
3894
3283
2903
2451
2204
1867
1682
1310
1053
720
612
512
463
407
361
307
257
225
1814
1620
1434
1266
1124
920
812
180
159
135
119
1.50
11.0
13.0
15.0
17
39
46
51
65
81
19
22
26
29
35
66
74
77
86
96
122
131
147
17
20
25
28
35
39
49
58
14.6
18
21
26
29
36
41
51
61
69
1.00
31
35
79
93
111
123
140
157
185
221
252
40
45
50
61
70
315
356
418
477
Weight approx.
[Lbs]
(460 V)
I
N
[A]
4.9
5.5
5.8
6.4
7.2
9.1
9.8
11.0
1.3
1.2
1.6
1.7
2.2
2.9
3.6
4.3
1.1
1.4
1.3
1.6
1.8
2.3
3.1
3.8
4.5
5.2
4.8
6.2
6.8
8.8
10.9
2.6
3.0
3.5
3.7
4.7
1.4
1.8
2.0
2.3
3921
3505
3336
3009
2682
2115
1965
1752
6372
5310
5310
5310
5310
6372
5310
4469
6372
6372
5310
5310
5310
5310
6372
6372
6372
6372
10620
11505
11505
11505
11505
11505
9947
8779
7425
6673
5646
5089
3965
3195
9.8
10.1
12.1
12.6
4.9
5.8
6.9
7.6
8.7
9.9
10.6
11.8
11.9
2.0
2.2
2.5
2.8
3.1
3.8
4.4
3275
2788
2328
2097
1850
1637
1398
1168
1027
3540
3540
3540
3540
3540
3540
3540
818
725
617
541
1.1
1.3
1.5
1.7
1.9
2.2
2.2
2.7
2.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.2
2.3
2.6
2.6
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9012 - R100 Z - 143 TC 126
1.6
1.8
1.9
2.1
2.4
3.0
3.2
3.6
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.5
1.6
2.0
2.3
2.9
3.6
220.93
196.08
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
31.62
29.42
26.27
278.98
220.93
196.08
155.28
139.72
111.47
99.63
79.49
66.93
58.70
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
59.38
47.87
SK 9032 - R100 Z - 145 TC
SK 9022 - R100 Z - 145 TC
196
143
SK 9022 - R150 U/Z - 145 TC 168
2.1
3.0
3.0
3.0
i
Regel
5.00
5.00
5.00
6.00
www.nord.com
D9
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
37
44
50
63
71
84
95
22
25
28
31
10.1
12.3
14.0
16
19
5.5
6.2
7.0
7.9
9.0
12.9
13.5
15.0
17
21
23
26
13.1
14.7
15.0
17
19
24
26
29
5.0
5.5
6.9
7.7
9.7
11.5
4.4
4.8
6.1
6.8
8.5
2.6
3.0
3.5
3.8
4.4
5.2
5.9
6.9
7.7
9.1
10.1
13.0
16
460
385
337
270
240
204
179
3106
2726
2425
2151
1894
1690
1381
1221
1080
920
768
694
610
542
1097
1044
947
840
663
617
550
4567
4115
3283
2929
2336
1974
1726
1540
1469
1328
1177
929
866
773
4345
3903
3115
2788
2221
8735
7523
6567
5947
5195
4381
3867
3275
2938
2487
2239
1743
1407
1.50
77
81
90
101
128
138
155
185
221
252
315
356
418
477
111
123
140
157
50
61
70
79
93
27
31
35
40
45
2.00
13.0
15.0
17
19
22
26
29
35
39
46
51
65
81
66
74
77
86
96
122
131
147
25
28
35
39
49
58
26
29
36
41
51
Weight approx.
[Lbs]
3.7
4.1
4.3
4.8
5.4
6.9
7.4
8.2
1.2
1.3
1.6
2.2
2.7
3.2
1.2
1.4
1.7
2.3
2.9
1.3
1.5
1.8
1.9
2.2
2.6
2.7
3.5
3.6
4.6
5.1
6.6
8.2
5310
5310
5310
6372
5310
4469
3921
3505
3336
3009
2682
2115
1965
1752
5310
5310
5310
6372
6372
11505
11505
11505
11505
11505
9947
8779
7425
6673
5646
5089
3965
3195
6.7
8.0
8.4
6.6
7.0
7.8
7.9
2.1
2.6
2.9
3.3
3.8
4.6
5.1
5.8
6.5
1.1
1.3
1.5
1.6
1.9
5.8
6.1
6.7
7.6
9.6
10.3
11.6
1398
1168
1027
818
725
617
541
3540
3540
3540
3540
3540
3540
3540
3540
3275
2788
2328
2097
1850
1637
6284
5691
5399
4806
3788
3531
3151
2.2
2.7
2.8
2.2
2.3
2.6
2.6
1.0
1.0
1.0
1.1
1.3
1.0
1.0
1.0
1.0
1.0
1.5
1.7
1.9
2.2
1.0
1.1
1.2
1.3
1.7
1.8
2.0
1.6
1.8
1.9
2.1
2.4
3.0
3.2
3.6
1.0
1.0
1.0
1.0
1.2
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.5
1.6
2.0
2.3
2.9
3.6
52.42
49.94
45.05
40.07
31.62
29.42
26.27
140.70
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9022 - R150 U/Z - 145 TC 168
SK 9012 - R100 Z - 145 TC 126
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
31.62
29.42
26.27
155.28
139.72
111.47
99.63
79.49
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
59.38
47.87
SK 9032 - R100 Z - 145 TC
SK 9022 - R100 Z - 145 TC
196
143
SK 9022 - R150 U/Z - 145 TC 168
(460 V)
I
N
[A]
3.0
3.0
3.4
3.4
3.4
i
Regel
6.00
5.00
5.00
5.00
6.00
D10 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
7.3
8.1
9.1
10.1
12.5
1.8
2.1
2.5
3.0
3.5
4.4
5.1
5.9
6.2
1.9
2.3
2.7
3.4
3.9
4.7
5.6
6.8
7.6
2.6
3.0
3.3
3.8
4.5
5.1
6.1
6.8
8.0
31
37
44
50
63
16
19
22
25
28
71
84
95
7.0
7.9
9.0
10.1
12.3
14.0
10.1
11.5
12.9
13.5
15.0
17
21
23
26
15691
13443
11186
9585
8124
6522
5602
4806
4549
3894
3522
3106
2797
2274
14594
12186
10496
8354
7195
6045
5053
4186
3708
10717
9363
8469
7399
6239
5514
4664
4186
3540
3230
2867
2531
2248
1850
1620
1443
1221
1027
929
813
722
614
513
450
360
319
272
238
1867
1637
1469
1398
1257
1124
884
822
735
3.00
11.7
14.0
16
20
24
28
34
41
46
10.9
12.7
15.0
18
21
26
30
35
37
44
48
55
61
75
16
18
20
23
27
31
37
41
48
2.00
61
69
77
81
90
101
128
138
155
79
93
111
123
140
157
185
221
252
315
356
418
477
35
40
45
50
61
70
Weight approx.
[Lbs]
(460 V)
I
N
[A]
4.9
5.0
6.0
6.3
4.9
2.5
2.9
3.4
3.8
4.4
5.3
5.9
5.9
1.1
1.2
1.4
1.6
1.9
2.2
3.4
3.9
4.3
4.6
5.1
5.7
7.2
7.8
8.7
3540
3540
3540
3540
3540
3540
3275
2788
2328
2097
1850
1637
1398
1168
1027
818
725
617
541
6372
6372
6284
5691
5399
4806
3788
3531
3151
2.6
3.3
3.5
4.4
4.3
1.2
1.6
1.7
2.2
5.5
6.0
6.8
7.6
8.6
4.9
5.3
7.4
7.2
10.0
2.2
3.1
3.4
4.4
1.1
1.2
1.4
1.6
1.8
1.9
2.5
2.5
3.2
19470
21240
19470
21240
21240
18647
16027
13735
13001
11142
10080
8885
8000
6496
31860
34860
30019
23877
20567
17293
14452
11965
10611
11505
11505
11505
11505
11505
10620
11505
10620
10133
2.2
2.2
2.7
2.8
2.2
1.1
1.3
1.5
1.7
1.9
2.3
2.6
2.6
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.7
1.8
2.0
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
66.93
58.70
52.42
49.94
45.05
40.07
31.62
29.42
26.27
SK 9022 - R150 U/Z - 145 TC 168
SK 9012 - R100 Z - 145 TC 126
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.5
1.5
1.9
2.1
2.4
2.7
3.0
1.0
1.1
1.2
1.6
1.7
1.8
2.6
2.5
3.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
374.09
320.56
266.67
228.51
193.82
155.52
133.66
114.53
108.44
92.92
84.04
74.08
66.71
54.15
347.96
290.70
250.34
199.13
171.48
144.22
120.48
99.81
88.50
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
SK 9052 - R150 Z - 145 TC
SK 9042 - R150 Z - 145 TC
SK 9032 - R150 Z - 145 TC
523
357
240
3.4
3.4
4.8
4.8
4.8
i
Regel
6.00
5.00
6.00
6.00
6.00
D11
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
32
39
44
55
62
73
84
16
19
22
24
28
8.8
10.8
12.3
13.8
42
46
54
61
77
23
26
30
34
6.1
6.8
8.5
10.1
11.5
12.9
13.5
15.0
17
21
20
21
23
25
3.0
3.5
4.6
5.5
6.1
7.2
8.0
10.3
12.3
12.7
14.8
17
8.9
11.4
13.6
14.1
16
19
22
24
25
875
732
642
512
455
387
339
3213
2628
2310
2053
1743
1460
1319
1159
1027
4673
4177
3336
2805
2460
2195
2097
1885
1682
1328
1230
1097
947
842
683
611
525
466
368
9399
8213
6115
5168
4646
3929
3540
2761
2310
2230
1920
1673
1416
1319
1239
1115
3195
2487
2080
2009
1726
1513
1274
1186
1115
195
233
265
332
374
440
502
97
117
129
147
165
53
65
74
83
77
81
90
101
128
138
155
180
202
36
41
51
61
69
249
279
325
365
462
3.00
53
68
82
85
99
113
133
143
153
18
21
28
74
76
89
102
33
37
43
48
62
120
129
138
153
Weight approx.
[Lbs]
3.5
4.2
4.4
3.5
3.7
4.1
4.2
2.0
2.4
2.7
3.1
3.4
1.1
1.3
1.5
1.7
7.8
8.4
9.1
9.9
11.5
2.9
3.0
3.4
3.8
4.8
5.2
5.8
6.7
7.6
1.1
1.5
1.9
2.3
2.6
1.2
1.4
1.7
2.2
2.3
2.9
3.2
4.2
5.0
5.2
5.1
5.3
6.2
8.1
7.1
9.5
3.6
4.6
5.5
5.7
5.6
5.8
6.9
9.0
7.9
2505
2089
1832
1469
1301
1106
974
3540
3540
3540
3540
3540
3540
3540
3319
2938
5310
6372
6372
6372
6372
6284
5691
5399
4806
3788
3531
3151
2708
2407
1956
1743
1505
1336
1053
11505
11505
10620
11505
10620
11505
11505
10859
9071
8753
7540
6584
5567
5186
4859
4390
9133
7124
5947
5744
4938
4319
3655
3398
3186
1.2
1.5
1.5
1.2
1.3
1.4
1.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.0
1.1
1.2
1.3
1.7
1.0
1.0
1.0
1.0
1.0
1.8
2.0
2.4
2.6
2.7
2.9
3.2
3.4
4.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.3
1.3
1.3
1.6
2.0
1.8
2.4
1.3
1.6
1.9
2.0
2.0
2.0
2.4
3.1
2.8
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
31.62
29.42
26.27
22.58
20.08
16.30
14.56
12.51
11.13
8.78
202.06
176.49
131.42
111.17
99.85
84.47
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
SK 9032 - R150 Z - 145 TC
SK 9012 - R150 Z - 145 TC
240
SK 9032 - R196 U/Z - 182 TC 254
SK 9022 - R150 U/Z - 145 TC 196
179
(460 V)
I
N
[A]
4.8
4.8
4.8
4.8
i
Regel
6.00
6.00
6.00
6.00
D12 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
2.6
3.2
5.2
5.8
8.2
9.1
11.3
13.2
16
18
2.7
3.1
3.9
4.6
5.3
5.6
6.6
7.3
6.1
6.9
8.4
9.7
11.1
1.8
2.1
2.4
3.1
3.6
4.2
5.1
25
30
34
40
48
14.8
17
20
21
23
57
75
5.5
6.1
7.2
8.0
10.3
12.3
12.7
2.7
3.3
5.4
6.0
7.3
8.3
9.5
2.2
2.5
3.2
18072
14682
9062
8098
17718
15027
12063
10363
8877
8408
7204
6514
5744
5168
4195
3593
3044
2593
26984
22541
19408
15443
13293
11186
9346
7735
6859
5620
4859
4248
3195
2788
2363
2204
2062
1859
1602
1398
1186
982
832
629
8620
7744
6549
5903
4602
3850
3708
26249
21320
13160
11771
9770
8514
7496
32736
28187
22426
5.00
16
19
31
35
49
55
68
79
93
109
16
19
24
27
32
34
39
44
10.5
12.6
14.6
18
21
25
30
37
41
50
58
67
89
102
120
129
138
153
177
203
240
289
341
451
33
37
43
48
62
74
76
7.50
16
20
32
36
44
50
57
13.0
15.0
19.0
Weight approx.
[Lbs]
(460 V)
I
N
[A]
3.7
4.1
4.6
5.2
5.8
6.8
1.2
1.4
1.8
1.9
2.4
2.3
2.9
3.3
1.2
1.6
1.8
2.4
2.7
2.8
4.0
3.9
5.4
6.6
7.7
8.8
3.5
4.3
5.4
7.9
5.7
5.5
5.7
6.7
7.2
3.0
3.2
3.7
4.8
4.3
8.0
7.0
1.3
1.4
1.8
1.9
2.5
3.0
3.1
42639
34639
21373
19116
21240
21240
21240
19470
20948
19470
17001
15372
13549
12204
9903
8478
7195
6115
31860
37170
35400
36427
31364
26382
22037
18258
16187
13266
11461
10018
11505
10620
11505
11505
10859
9071
8753
7540
6584
5567
5186
4859
4390
3779
3301
2788
2319
1965
1487
63720
53357
32922
29444
24444
21293
18771
37170
35400
37170
2.4
3.0
3.7
5.4
6.5
7.5
8.5
1.1
1.3
1.7
1.5
1.8
2.3
3.3
1.6
1.7
2.0
2.2
2.5
2.9
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.0
1.0
1.0
1.0
1.1
1.2
1.7
1.6
2.3
2.8
3.2
3.7
2.4
2.3
2.4
2.9
3.1
1.3
1.3
1.6
2.0
1.8
3.4
3.0
1.0
1.0
1.0
1.0
1.1
1.3
1.3
1.0
1.2
1.5
2.2
2.6
3.0
3.4
1.0
1.0
1.0
233.08
189.35
116.83
104.49
228.51
193.82
155.52
133.66
114.53
108.44
92.92
84.04
74.08
66.71
54.15
46.35
39.32
33.44
347.96
290.70
250.34
199.13
171.48
144.22
120.48
99.81
88.50
72.51
62.65
54.77
111.17
99.85
84.47
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
SK 9062 - R196 Z - 184 TC
SK 9052 - R196 Z - 184 TC
SK 9042 - R196 Z - 184 TC
862
553
388
SK 9032 - R196 U/Z - 184 TC 269
233.08
189.35
116.83
104.49
86.75
75.58
66.60
290.70
250.34
199.13
SK 9062 - R210 Z - 213 TC
SK 9052 - R210 Z - 213 TC
904
595
7.6
7.6
7.6
7.6
11
11 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
D13
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
32
38
40
47
13.6
16
19
23
27
4.1
4.7
5.5
5.8
6.8
7.5
8.5
9.4
11.6
3.7
4.4
5.2
6.3
7.1
8.7
10.1
11.5
14.0
16
17
20
24
26
31
35
41
50
59
78
7.5
8.3
10.6
12.7
13.2
15.0
18
21
22
2.7
3.3
5.4
6.0
7.3
8.3
9.5
3.2
3.7
4.4
5.2
6.3
7.1
5222
4425
3770
3053
2620
2221
1885
1761
1513
17514
15054
12894
12213
10461
9461
8346
7514
6098
19311
16240
13567
11240
9965
8169
7053
6168
5080
4372
4089
3540
2991
2699
2328
2036
1717
1425
1212
912
9514
8576
6691
5584
5390
4637
4053
3425
3195
34993
28426
17541
15691
13027
11346
10001
29895
25745
21656
18089
14983
13284
7.50
22
26
31
84
97
104
120
38
43
52
60
69
142
158
183
209
248
298
352
466
92
105
124
133
45
50
64
76
79
82
96
113
139
163
192
225
241
282
24
28
33
35
41
45
51
57
70
10.0
16
20
32
36
44
50
57
19
22
26
31
38
43
Weight approx.
[Lbs]
7.0
7.7
7.3
8.2
3.6
4.0
4.7
5.8
6.1
1.2
1.3
1.6
1.6
2.0
2.2
2.5
2.8
3.2
1.8
2.0
2.7
7.3
7.7
9.1
10.5
2.7
3.7
4.6
5.3
6.0
3.0
3.9
3.8
3.9
4.6
5.0
5.5
4.9
1.2
1.3
1.7
2.1
2.1
2.1
2.2
2.6
3.3
13063
11080
9425
7646
6549
5558
4726
4416
3779
21240
19470
21240
19470
21240
21240
20877
18797
15257
35400
31860
33949
28125
24939
20435
17656
15434
12717
10947
10239
8850
7478
6761
5814
5080
4301
3575
3027
2283
11505
11505
11505
11505
11505
9735
8850
8585
7992
63720
53357
32922
29444
24444
21293
18771
37170
35400
31860
33949
28125
24939
1.8
2.2
2.8
4.1
4.9
5.6
6.4
1.2
1.4
1.5
2.1
2.0
2.8
1.4
1.6
1.9
2.3
2.4
2.8
3.1
2.9
3.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.0
1.0
1.1
1.1
1.5
1.8
2.1
2.4
2.9
3.1
3.6
4.2
1.2
1.6
1.5
1.6
1.9
2.0
2.2
1.9
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.3
46.35
39.32
33.44
27.14
23.23
19.71
16.76
15.66
13.40
155.52
133.66
114.53
108.44
92.92
84.04
74.08
66.71
54.15
171.48
144.22
120.48
99.81
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
84.47
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
SK 9052 - R210 Z - 213 TC
SK 9042 - R210 Z - 213 TC
SK 9032 - R210 Z - 213 TC
1.0
1.2
1.5
2.2
2.6
3.0
3.4
1.0
1.0
1.0
1.1
1.1
1.5
233.08
189.35
116.83
104.49
86.75
75.58
66.60
199.13
171.48
144.22
120.48
99.81
88.50
SK 9062 - R210 Z - 215 TC
SK 9052 - R210 Z - 215 TC
595
430
311
917
609
(460 V)
I
N
[A]
11
11
11
14
14 i
Regel
6.00
6.00
6.00
6.00
6.00
D14 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
35
41
50
59
78
10.6
22
24
26
31
12.7
13.2
15.0
18
21
16
19
23
27
32
38
40
47
5.5
5.8
6.8
7.5
8.5
9.4
11.6
13.6
8.7
10.1
11.5
14.0
16
17
20
14.0
16
17
20
23
28
5.2
6.3
7.1
8.7
10.1
11.5
2.7
3.3
3.6
4.4
5.4
6.0
7.3
8.3
9.5
11.4
10886
9408
8222
6779
5832
5460
4717
8912
7452
7186
6186
5407
4575
4257
3983
3602
3098
2708
2292
1903
1611
1221
5903
5018
4071
3487
2956
2513
2354
2009
17196
16284
13948
12620
11124
10018
8133
6956
27134
22479
19930
16328
14107
12337
10169
8753
8186
7071
6186
5098
52498
42648
39914
32426
26311
23532
19541
17019
15001
12479
10.0
64
76
79
92
105
124
133
142
158
183
209
248
298
352
466
96
113
139
163
192
225
241
282
33
35
41
45
51
57
70
82
52
60
69
84
97
104
120
15.0
84
97
104
120
138
167
31
38
43
52
60
69
16
20
21
26
32
36
44
50
57
68
Weight approx.
[Lbs]
(460 V)
I
N
[A]
1.3
1.5
1.6
1.6
1.6
1.9
2.5
2.2
2.9
2.9
2.9
3.5
3.7
4.1
3.6
3.0
3.5
4.3
4.6
5.2
5.8
5.5
6.2
1.2
1.2
1.5
1.7
1.9
2.1
2.4
2.7
3.4
4.0
4.5
5.5
5.8
6.8
7.9
20435
17656
15434
12717
10947
10239
8850
11505
11505
11505
9735
8850
8585
7992
7478
6761
5814
5080
4301
3575
3027
2283
11080
9425
7646
6549
5558
4726
4416
3779
21240
19470
21240
21240
20877
18797
15257
13063
3.7
3.8
4.5
5.3
5.7
6.6
1.4
1.3
1.9
2.3
2.6
3.0
1.2
1.5
1.6
2.0
1.8
2.7
3.3
3.7
4.2
5.1
37170
30090
35621
29187
25223
22045
18169
15647
14629
12638
11054
9107
63720
63720
63720
57950
47029
42064
34922
30426
26807
22311
1.0
1.0
1.0
1.0
1.0
1.0
1.3
1.2
1.6
1.5
1.6
1.9
2.0
2.2
1.9
1.6
1.9
2.3
2.4
2.8
3.1
2.9
3.3
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.4
1.8
2.1
2.4
2.9
3.1
3.6
4.2
72.51
62.65
54.77
45.13
38.86
36.34
31.40
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
114.53
108.44
92.92
84.04
74.08
66.71
54.15
46.35
39.32
33.44
27.14
23.23
19.71
16.76
15.66
13.40
SK 9052 - R210 Z - 215 TC
SK 9042 - R210 Z - 215 TC
SK 9032 - R210 Z - 215 TC
609
443
324
2.0
2.1
2.5
2.9
3.2
3.7
1.0
1.0
1.0
1.3
1.5
1.7
1.0
1.0
1.0
1.1
1.0
1.5
1.8
2.1
2.4
2.9
120.48
99.81
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
233.08
189.35
177.22
143.97
116.83
104.49
86.75
75.58
66.60
55.42
SK 9062 - R250 Z - 254 TC
SK 9052 - R250 Z - 254 TC
1120
785
14
14
14
21
21 i
Regel
6.00
6.00
6.00
6.00
6.00
www.nord.com
D15
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
2.2
2.6
4.3
5.2
5.5
6.7
7.8
9.0
2.0
2.4
4.0
4.8
5.1
6.2
7.1
8.3
9.5
2.6
3.0
5.1
6.5
2.8
3.3
5.5
3.1
3.3
4.1
5.1
5.7
6.8
7.8
8.9
10.7
13.1
15.0
18
21
3.4
3.6
4.5
5.5
27
32
38
40
47
55
62
67
71
7.5
8.5
9.4
11.6
13.6
16
19
23
15.0
163
192
225
241
282
332
370
402
428
45
51
57
70
82
96
113
139
20.0
15.0
18
30
39
17
20
33
79
91
106
128
34
41
47
53
64
19
20
25
30
20
22
27
33
13.0
16
26
31
33
40
47
54
12.0
14.5
24
29
30
37
43
50
57
Weight approx.
[Lbs]
87323
71889
43772
36028
34267
28205
24382
21036
94881
78110
47560
39152
37232
30648
26497
22860
19948
73729
62030
37241
28931
67862
57091
34276
60534
56658
46029
37347
33400
27736
24161
21293
17718
14390
12408
10673
8877
55711
52144
42356
34373
5230
4443
3779
3531
3018
2567
2301
2115
1991
18930
16682
15027
12195
10443
8859
7531
6115
9354
7938
6744
6301
5390
4593
4106
3779
3558
21240
21240
21240
19470
18585
15824
13461
10921
3.0
3.5
3.9
3.6
4.1
4.5
4.2
4.6
4.9
1.1
1.3
1.4
1.6
1.8
2.0
2.4
2.9
1.2
1.5
2.4
2.9
3.0
3.8
4.4
5.0
2.8
3.5
4.0
4.6
5.3
1.1
1.4
2.2
2.7
2.2
2.3
4.3
5.5
2.3
2.5
4.6
1.9
2.3
2.6
3.0
3.6
1.1
1.1
1.4
1.3
4.2
4.6
6.0
7.2
1.1
1.2
1.5
1.4
148255
124732
74889
58171
159300
144078
93429
103545
106200
95624
78721
74853
61623
53277
45958
40108
103545
106200
103545
98208
93385
76880
66464
57339
63720
63720
63720
48675
63720
55764
48587
42807
35621
28940
24939
21461
17859
63720
63720
63720
48675
1.7
2.0
2.2
2.0
2.3
2.5
2.4
2.6
2.7
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.6
1.0
1.0
1.0
1.1
1.1
1.4
1.6
1.9
1.0
1.0
1.1
1.3
1.4
1.7
2.0
2.3
2.6
1.1
1.2
2.1
2.7
1.0
1.0
1.7
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.8
2.1
2.3
3.0
3.6
1.0
1.0
1.0
1.0
23.23
19.71
16.76
15.66
13.40
11.40
10.21
9.39
8.83
84.04
74.08
66.71
54.15
46.35
39.32
33.44
27.14
SK 9042 - R250 Z - 254 TC 620
230.64
194.04
116.50
90.50
230.64
194.04
116.50
296.80
244.32
148.76
122.46
116.45
95.86
82.88
71.50
62.39
296.80
244.32
148.76
122.46
116.45
95.86
82.88
71.50
189.35
177.22
143.97
116.83
104.49
86.75
75.58
66.60
55.42
45.02
38.80
33.38
27.78
189.35
177.22
143.97
116.83
SK 9086 - R280 Z - 256 TC
SK 9086 - R300 Z - 256 TC
SK 9082 - R280 Z - 256 TC
SK 9082 - R300 Z - 256 TC
SK 9062 - R280 Z - 256 TC
2280
2340
1729
1788
1155
SK 9062 - R300 U/Z - 256 TC 1215
(460 V)
I
N
[A]
21
27
27
27
27
27
27 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
6.00
D16 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
34
36
44
50
55
16
19
22
26
30
60
6.7
8.2
9.4
10.8
13.1
15.0
6.2
7.4
8.5
9.7
11.6
14.3
17
19
23
20
23
28
33
37
39
48
54
7.3
8.9
10.3
11.7
14.2
17
18
2.6
4.3
5.2
5.5
6.7
7.8
9.0
15.0
18
4.5
5.5
6.2
7.4
2.8
3.3
5.5
7.1
8.2
9.5
20.0
98
113
129
157
182
206
217
264
299
331
358
40
49
57
65
79
91
37
44
51
58
70
86
99
116
139
123
141
171
198
224
236
287
325
44
53
62
70
85
99
106
25.0
16
26
31
33
40
47
54
93
108
27
33
37
44
17
20
33
43
49
57
Weight approx.
[Lbs]
(460 V)
I
N
[A]
28293
23178
20028
17505
14426
12425
11620
10036
8779
7230
6230
5505
5222
4301
3797
3425
3177
30745
25523
22240
19594
16302
13248
11417
9824
8177
26037
21337
18435
16116
13275
11434
10691
9239
8080
6655
5735
5062
4806
3956
3496
84827
71366
42843
33285
28771
24824
89854
54711
45038
42825
35258
30479
26293
15275
13178
52950
42967
38427
31904
5.5
4.9
5.6
5.8
6.2
3.2
3.7
4.0
4.7
5.1
6.4
1.3
1.6
1.9
2.1
2.6
2.7
2.1
2.5
2.9
3.3
3.9
4.5
5.0
6.5
7.8
4.0
4.4
5.1
5.6
5.9
5.3
6.0
6.3
1.4
1.7
2.0
2.3
2.8
2.9
3.5
37170
37170
37170
35205
29010
24984
23355
20187
17647
14541
12523
11063
10496
8646
7638
6885
6381
63720
63720
60614
53410
44445
36108
31117
26771
22275
37170
37170
37170
37170
36197
31161
29143
25178
22010
18143
15620
13806
13098
10788
9531
1.2
1.9
2.4
2.4
3.0
3.5
4.0
7.0
8.1
1.2
1.1
1.7
2.0
1.9
2.0
3.7
4.8
5.5
6.4
159300
144078
93429
72579
62747
54135
106200
103545
98208
93385
76880
66464
57339
33311
28736
63720
48675
63720
63720
2.7
2.4
2.8
2.9
3.1
1.6
1.8
2.0
2.3
2.5
3.2
1.0
1.0
1.0
1.1
1.3
1.3
1.0
1.0
1.1
1.2
1.4
1.7
1.8
2.4
2.9
1.5
1.6
1.9
2.0
2.2
2.0
2.2
2.3
1.0
1.0
1.0
1.0
1.0
1.1
1.3
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
10.71
9.93
104.49
86.75
75.58
66.60
55.42
45.02
38.80
33.38
27.78
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
SK 9062 - R300 U - 256 TC
SK 9052 - R280 Z - 256 TC
1215
820
SK 9052 - R300 U/Z - 256 TC 878
1.0
1.0
1.1
1.1
1.4
1.6
1.9
3.2
3.7
1.0
1.0
1.0
1.0
1.0
1.0
1.7
2.2
2.5
2.9
230.64
194.04
116.50
90.50
78.24
67.50
244.32
148.76
122.46
116.45
95.86
82.88
71.50
41.54
35.83
143.97
116.83
104.49
86.75
SK 9086 - R300 Z - 284 TC
SK 9082 - R300 Z - 284 TC
2390
1839
SK 9062 - R300 U/Z - 284 TC 1266
27
27
27
34
34
34 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
www.nord.com
D17
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
30.0
37
44
51
58
70
86
99
116
139
161
171
26
31
33
40
47
54
93
108
53
62
70
85
99
106
123
141
171
198
17
20
33
43
49
57
25.0
44
53
62
70
85
99
106
123
141
171
198
224
236
287
325
51
58
70
86
99
116
139
161
171
Weight approx.
[Lbs]
101793
85641
51419
39940
34533
29789
46117
38285
33356
29391
24461
19868
17125
14735
12257
10567
9965
65658
54047
51392
42303
36577
31559
18337
15815
32002
27647
24169
19921
17151
16036
13859
12116
9983
8593
32550
26665
23045
20143
16594
14293
13364
11549
10098
8319
7169
6328
6009
4947
4372
27798
24497
20382
16558
14266
12275
10213
8806
8301
6.2
7.4
8.5
9.7
11.6
14.3
17
19
23
27
28
4.3
5.2
5.5
6.7
7.8
9.0
15.0
18
8.9
20
23
28
33
10.3
11.7
14.2
17
18
2.8
3.3
5.5
7.1
8.2
9.5
7.3
8.9
10.3
11.7
14.2
17
18
20
23
28
33
37
39
48
54
8.5
9.7
11.6
14.3
17
19
23
27
28
1.4
1.7
1.9
2.2
2.6
3.0
3.3
4.3
5.2
6.0
6.4
1.6
2.0
2.0
2.5
2.9
3.4
5.8
6.7
1.2
1.3
1.5
1.9
2.0
2.3
2.7
2.9
3.4
3.7
1.6
1.7
3.1
4.0
4.6
5.3
159300
144078
93429
72579
62747
54135
103545
98208
93385
76880
66464
57339
33311
28736
63720
63720
60614
53410
44445
36108
31117
26771
22275
19196
18098
37170
37170
37170
36197
31161
29143
25178
22010
18143
15620
1.1
1.4
1.6
1.8
2.2
2.4
2.8
3.2
3.5
4.0
4.4
4.8
4.3
4.8
5.1
2.3
2.6
3.1
3.6
4.0
5.2
6.2
7.2
7.7
37170
37170
37170
37170
36197
31161
29143
25178
22010
18143
15620
13806
13098
10788
9531
60614
53410
44445
36108
31117
26771
22275
19196
18098
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.6
1.9
2.0
2.2
2.0
2.2
2.3
1.1
1.2
1.4
1.7
1.8
2.4
2.9
3.3
3.5
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
75.58
66.60
55.42
45.02
38.80
33.38
27.78
23.94
22.57
SK 9062 - R300 U/Z - 284 TC 1266
SK 9052 - R300 U/Z - 284 TC 928
1.0
1.0
1.1
1.2
1.4
1.7
1.8
2.4
2.9
3.3
3.5
1.0
1.1
1.1
1.4
1.6
1.9
3.2
3.7
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.6
1.9
2.0
1.0
1.0
1.7
2.2
2.5
2.9
230.64
194.04
116.50
90.50
78.24
67.50
148.76
122.46
116.45
95.86
82.88
71.50
41.54
35.83
104.49
86.75
75.58
66.60
55.42
45.02
38.80
33.38
27.78
23.94
22.57
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
SK 9086 - R300 Z - 286 TC
SK 9082 - R300 Z - 286 TC
2412
1861
SK 9062 - R300 U/Z - 286 TC 1288
SK 9052 - R300 U/Z - 286 TC 950
(460 V)
I
N
[A]
34
34
40
40
40
40 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
D18 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
30.0
224
236
287
325
40.0
13.0
15.0
32
38
42
26
32
33
40
47
54
93
108
17
20
33
43
49
57
139
162
172
199
251
291
45
51
58
70
86
100
116
71
86
100
107
123
141
171
199
225
237
288
326
50.0
26
30
34
39
45
53
Weight approx.
[Lbs]
(460 V)
I
N
[A]
7593
7204
5938
5239
174451
148592
70499
59976
53711
135246
113784
68313
53065
45878
39577
87226
71809
68287
56206
48595
41922
24355
21010
50870
44321
39055
32497
26400
22753
19576
16293
14036
13231
11408
9045
7797
32117
26462
22789
21311
18408
16098
13266
11425
10089
9576
7885
6965
110191
93739
83951
73322
63118
53764
37
39
48
54
4.3
5.3
5.5
6.7
7.8
9.0
16
18
2.8
3.3
5.5
7.1
8.2
9.6
23
27
29
33
42
49
7.4
8.5
9.7
11.6
14.3
17
19
11.8
14.3
17
18
21
24
29
33
37
40
48
54
2.2
2.5
5.4
6.3
7.0
5.1
6.1
6.8
7.7
9.0
10.6
13806
13098
10788
9531
4.0
3.6
4.0
4.2
1.2
1.5
1.5
1.9
2.2
2.5
4.4
5.1
1.2
1.3
2.3
3.0
3.5
4.0
3.9
4.5
4.8
5.6
5.2
5.7
1.3
1.4
1.6
2.0
2.3
2.5
3.3
1.2
1.4
1.5
1.7
2.0
2.2
2.5
2.8
3.0
2.7
3.0
3.2
1.3
1.5
3.3
3.8
4.3
230100
230100
173256
147388
131998
159300
144078
159300
130414
112749
97270
103545
106200
103545
106200
106200
103032
59861
51631
63720
63720
63720
63720
60180
55914
48100
40029
34497
32524
28028
22231
19151
37170
37170
33630
37170
37170
35400
32595
28072
24798
23532
19382
17116
230100
223392
200063
174726
150423
128121
2.1
2.5
2.7
3.1
3.6
3.8
2.2
2.0
2.2
2.3
1.0
1.0
1.0
1.0
1.0
1.0
1.8
2.1
1.0
1.0
1.0
1.2
1.4
1.6
1.6
1.8
2.0
2.3
2.1
2.3
1.0
1.0
1.0
1.0
1.0
1.0
1.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.1
1.2
1.3
1.0
1.0
1.3
1.6
1.7
17.21
16.33
13.45
11.88
SK 9052 - R300 U/Z - 286 TC 950
297.51
253.40
120.23
102.28
91.60
230.64
194.04
116.50
90.50
78.24
67.50
148.76
122.46
116.45
95.86
82.88
71.50
41.54
35.83
86.75
75.58
66.60
55.42
45.02
38.80
33.38
27.78
23.94
22.57
19.45
15.43
13.29
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
SK 9092 - R350 Z - 200L/4
SK 9086 - R350 Z - 200L/4
SK 9082 - R350 Z - 200L/4
SK 9062 - R350 Z - 200L/4
3828
2474
1923
1349
SK 9052 - R350 U/Z - 200L/4 1012
1.0
1.0
1.2
1.3
1.5
1.6
120.23
102.28
91.60
80.00
68.87
58.66
SK 9092 - R375 Z - 225S/4 4115
40
45
45
45
45
45
62 i
Regel
6.00
6.00
6.00
6.00
6.00
6.00
5.00
www.nord.com
D19
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
50.0
79
91
201
233
262
272
285
321
56
69
80
93
111
129
137
159
32
37
43
50
58
75
86
99
116
157
180
211
34
40
46
53
62
105
123
60.0
34
40
46
53
62
105
123
26
30
34
39
45
53
79
91
37
43
50
58
75
86
99
Weight approx.
[Lbs]
35834
31302
82942
71712
61862
53985
46100
27054
23107
50790
41259
35559
30594
25461
21939
20682
17824
14142
12178
10841
10452
9947
8823
87854
75960
65534
57180
48834
38073
32842
28656
24479
18081
15780
13470
132228
112492
100740
87987
75747
64517
43002
37559
99536
86049
74234
64782
55321
32471
27727
91155
78641
68614
58596
45684
39409
34391
16
18
40
47
52
54
57
64
11.2
13.8
16
19
22
26
27
32
20
23
31
36
42
6.5
7.5
8.7
9.9
11.6
14.9
17
6.8
7.9
9.2
10.5
12.3
21
25
6.8
7.9
9.2
10.5
12.3
21
25
5.1
6.1
6.8
7.7
9.0
10.6
16
18
7.5
8.7
9.9
11.6
14.9
17
20
6.4
7.4
3.3
3.6
3.9
4.1
4.3
4.5
1.3
1.5
1.6
2.1
2.5
2.9
3.1
3.6
1.2
1.4
1.6
1.9
2.2
2.8
3.2
3.7
4.3
4.7
5.2
5.8
1.9
2.2
2.6
3.0
3.5
5.9
6.9
85403
74588
159300
159300
147432
128644
109864
64472
55065
63720
60180
56640
63720
60676
52286
49295
42480
33701
29028
25842
24895
23700
21036
106200
106200
106200
106200
106200
90730
78261
68295
58339
43091
37613
32108
1.6
1.9
2.1
2.5
2.9
4.9
5.7
1.7
2.0
2.3
2.6
3.0
3.2
5.4
6.1
1.2
1.4
1.5
1.8
2.3
2.7
3.1
230100
223392
200063
174726
150423
128121
85403
74588
159300
159300
147432
128644
109864
64472
55065
106200
106200
106200
106200
90730
78261
68295
2.7
3.1
1.4
1.5
1.6
1.7
1.8
1.9
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.5
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
1.0
1.0
1.1
1.2
1.4
2.5
2.9
1.0
1.0
1.1
1.2
1.4
2.5
2.9
1.0
1.0
1.2
1.3
1.5
1.6
2.7
3.1
1.0
1.0
1.0
1.0
1.2
1.4
1.6
39.10
34.15
90.50
78.24
67.50
58.90
50.30
29.52
25.21
55.42
45.02
38.80
33.38
27.78
23.94
22.57
19.45
15.43
13.29
11.83
11.40
10.85
9.63
95.86
82.88
71.50
62.39
53.28
41.54
35.83
31.27
26.71
19.73
17.22
14.70
SK 9092 - R375 Z - 225S/4
SK 9086 - R375 Z - 225S/4
4115
2858
SK 9082 - R375 U/Z - 225S/4 2306
SK 9062 - R375 U/Z - 225S/4 1733
120.23
102.28
91.60
80.00
68.87
58.66
39.10
34.15
90.50
78.24
67.50
58.90
50.30
29.52
25.21
82.88
71.50
62.39
53.28
41.54
35.83
31.27
SK 9092 - R375 Z - 225M/4
SK 9086 - R375 Z - 225M/4
4187
2930
SK 9082 - R375 U/Z - 225M/4 2379
(460 V)
I
N
[A]
62
62
62
62
71
71
71 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
5.00
D20 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
75.0
26
30
34
39
45
53
79
91
34
40
46
52
61
105
123
210
80
93
111
129
137
159
200
233
261
271
285
321
43
50
58
74
86
99
116
157
180
210
60.0
116
157
180
211
69
80
93
111
129
137
159
201
233
262
272
285
321
100.0
26
30
Weight approx.
[Lbs]
(460 V)
I
N
[A]
165486
140777
126077
110112
94792
80739
53817
47002
124564
107687
92907
81075
69234
40630
34701
20231
53401
45940
38241
32949
31064
26771
21240
18293
16284
15691
14930
13257
98412
85872
73331
57180
49321
43038
36763
27161
23700
20231
29373
21700
18939
16169
49516
42675
36710
30550
26329
24824
21390
16974
14620
13010
12540
11930
10593
217338
189815
5.1
6.0
6.8
7.7
9.0
10.5
16
18
6.8
7.9
9.2
10.5
12.3
21
25
42
16
19
22
26
27
32
40
47
52
54
57
64
8.6
9.9
11.6
14.9
17
20
23
31
36
42
23
31
36
42
13.8
16
19
22
26
27
32
40
47
52
54
57
64
6.5
7.5
58339
43091
37613
32108
60180
56640
63720
60676
52286
49295
42480
33701
29028
25842
24895
23700
21036
1.2
1.3
1.7
2.1
2.4
2.6
3.0
2.8
3.0
3.3
3.4
3.6
3.8
3.6
3.9
4.3
4:8
1.4
1.6
1.8
2.1
2.4
2.5
4.3
4.9
1.3
1.5
1.7
2.0
2.3
3.9
4.6
5.5
1.1
1.4
1.7
1.9
2.1
2.4
2.2
2.4
2.6
2.7
2.8
3.0
1.1
1.2
1.4
1.9
2.2
2.5
2.9
3.1
3.4
3.8
230100
230100
230100
202276
174133
148317
98863
86349
159300
159300
159300
148928
127183
74641
63738
37170
56640
63720
63720
60534
57065
49179
39011
33603
29913
28824
27435
24346
106200
106200
106200
105032
90597
79066
67534
49887
43542
37170
230100
230100
1.1
1.2
1.0
1.0
1.0
1.1
1.3
1.4
2.3
2.7
1.0
1.0
1.0
1.1
1.3
2.1
2.5
3.0
1.0
1.0
1.0
1.1
1.1
1.3
1.2
1.3
1.4
1.5
1.5
1.6
1.0
1.0
1.0
1.0
1.2
1.3
1.6
1.7
1.9
2.1
1.8
2.0
2.2
2:4
1.0
1.0
1.0
1.1
1.2
1.3
1.5
1.4
1.5
1.6
1.7
1.8
1.9
1.0
1.0
26.71
19.73
17.22
14:70
45.02
38.80
33.38
27.78
23.94
22.57
19.45
15.43
13.29
11.83
11.40
10.85
9.63
SK 9082 - R375 U/Z - 225M/4 2379
SK 9062 - R375 U/Z - 225M/4 1806
120.23
102.28
91.60
80.00
68.87
58.66
39.10
34.15
90.50
78.24
67.50
58.90
50.30
29.52
25.21
14.70
38.80
33.38
27.78
23.94
22.57
19.45
15.43
13.29
11.83
11.40
10.85
9.63
71.50
62.39
53.28
41.54
35.83
31.27
26.71
19.73
17.22
14.70
SK 9092 - R400 Z - 250M/4
SK 9086 - R400 Z - 250M/4
4593
3336
SK 9082 - R400 U/Z - 250M/4 2785
SK 9062 - R400 U/Z - 250M/4 2212
91.60
80.00
SK 9092 - R500 U/Z - 280S/4 5662
71
71
85
85
85
85
111 i
Regel
5.00
5.00
5.00
5.00
5.00
5.00
4.00
www.nord.com
D21
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output Torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red.ratio
High f
B1
Low f
B2 i ges
Type
125.0
35
41
48
59
61
70
82
96
118
139
170
77
90
107
122
139
163
195
48
57
68
81
95
114
135
163
195
150.0
48
59
100.0
35
41
48
59
61
70
82
96
117
139
170
41
113
135
163
194
48
57
67
81
95
67
76
90
107
121
139
163
194
Weight approx.
[Lbs]
(460 V)
I
N
[A]
148769
124599
104819
87305
74561
62463
52551
43480
36409
92483
78995
66163
58348
50932
43480
36409
203683
173487
147140
120227
115643
100996
86597
73765
60277
51047
41701
176566
144273
139750
119351
99961
84093
70039
59817
50109
42161
34878
29205
163406
139184
118041
96447
92775
81031
69473
59180
48356
40949
33453
85013
74198
63375
53073
46817
40860
34878
29205
19
22
27
30
35
41
49
11.9
14.2
17
20
24
28
34
41
49
8.7
10.2
12.1
14.7
15.0
18
20
24
29
35
43
12.1
14.7
10.2
28
34
41
49
11.9
14.2
17
20
24
8.7
10.2
12.0
14.7
15.0
18
20
24
29
35
42
30
35
41
49
17
19
22
27
1.1
1.3
1.6
1.4
1.6
1.8
2.0
1.1
1.3
1.4
1.8
2.1
2.6
2.9
2.5
2.9
2.0
2.3
2.7
3.1
3.5
3.0
3.5
1.1
1.2
1.3
1.5
159300
159300
141600
159300
142857
119679
100695
83296
69756
106200
106200
106200
84075
81420
77880
69756
230100
203550
197355
185850
221569
193514
165920
141326
115484
97810
79898
197355
185850
1.1
1.3
1.1
1.3
1.6
1.7
2.3
2.7
3.2
3.6
3.2
3.6
1.4
1.5
1.7
1.9
2.5
2.8
3.3
3.9
4.3
3.7
4.3
1.8
2.0
2.2
2.5
1.2
1.4
1.7
2.0
159300
159300
159300
141600
159300
143264
120015
100979
83535
69950
230100
203550
197355
185850
222188
194063
166389
141724
115811
98085
80128
106200
106200
106200
106200
84075
81420
77880
69950
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.3
1.5
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.8
1.6
1.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.3
1.5
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.6
1.8
1.6
1.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
58.90
50.30
42.13
35.44
29.52
25.21
21.12
17.77
14.70
12.31
68.87
58.66
49.75
40.65
39.10
34.15
29.28
24.94
20.38
17.26
14.10
35.83
31.27
26.71
22.37
19.73
17.22
14.70
12.31
SK 9092 - R500 U/Z - 280S/4 5662
SK 9086 - R500 U/Z - 280S/4 4406
SK 9082 - R500 U/Z - 280S/4 3854
50.30
42.13
35.44
29.52
25.21
21.12
17.77
14.70
12.31
31.27
26.71
22.37
19.73
17.22
14.70
12.31
68.87
58.66
49.75
40.65
39.10
34.15
29.28
24.94
20.38
17.26
14.10
SK 9092 - R500 U/Z - 280M/4 5773
SK 9086 - R500 U/Z - 280M/4 4516
SK 9082 - R500 U/Z - 280M/4 3965
49.75
40.65
SK 9092 - R500 U/Z - 315S/4 6148
111
111
111
145
145
145
173 i
Regel
4.00
4.00
4.00
4.00
4.00
4.00
4.00
D22 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
150.0
61
70
82
96
118
139
170
114
135
163
195
57
68
81
95
90
107
122
139
163
195
138768
121201
103917
88518
72331
61260
50038
149521
125776
104766
89474
74960
63065
52171
43692
94792
79393
70021
61118
52171
43692
28
34
41
49
14.2
17
20
24
22
27
30
35
41
49
15.0
18
20
24
29
35
43
1.1
1.1
1.5
1.8
2.1
2.4
2.1
2.4
1.1
1.3
1.2
1.3
1.5
1.7
1.7
1.9
2.2
2.6
2.9
2.5
2.9
221569
193514
165920
141326
115484
97810
79898
159300
141600
159300
142857
119679
100695
83296
69756
106200
106200
84075
81420
77880
69756
1.0
1.0
1.0
1.1
1.3
1.5
1.3
1.5
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.2
1.4
1.6
1.8
1.6
1.8
Weight approx.
[Lbs]
(460 V)
I
N
[A]
39.10
34.15
29.28
24.94
20.38
17.26
14.10
42.13
35.44
29.52
25.21
21.12
17.77
14.70
12.31
26.71
22.37
19.73
17.22
14.70
12.31
SK 9092 - R500 U/Z - 315S/4 6148
SK 9086 - R500 U/Z - 315S/4 4891
SK 9082 - R500 U/Z - 315S/4 4339
173
173
173 i
Regel
4.00
4.00
4.00
www.nord.com
D23
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, FOOT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
SK 9012
Type
- R 150 U - 145 TC
- R 500 U - 280 S
- 280 M
- 315 S
19.68
9.96
2.05 15.75
4.33
1.54
4.72
24.13
20.47
15.55
17.72
14.76
13.78
16.46
12.99
4.53
2.36
1.77
5.91
4.72
3.46
8.58
27.76
8.86
59.49
2.87
19.69
43.27
20.71
59.49
2.87
19.69
62.64 -0.48
19.69
43.27
20.71
61.10
35.20
AB FP L
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
16.93 17.44 31.10
22.44
9.45
25.24
11.81
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
U UY V
5.30
7.20
11.30
Key
1.250
1.36
2.36
1/4 x 1/4 x 2
SK 9022 7.48
3.58
0.55
5.12
1.97
0.55
2.28
9.29
- R 150 U - 145 TC 7.40
6.54
SK 9032
6.77
5.51
4.72
6.34
5.51
1.18
1.18
0.95
2.36
1.97
1.50
2.95
11.42
3.94
9.06
4.47
0.94
7.48
2.56
0.71
2.36
11.61
- R 196 U - 182 TC
- 184 TC
9.57
7.68
7.99
7.09
7.68
7.72
6.50
1.57
0.79
0.99
2.76
2.36
1.77
3.78
12.56
4.41
SK 9052 12.99
6.73
1.61 11.02
3.35
1.02
3.54
16.73
- R 300 U - 256 TC
- 284 TC
- 286 TC
- R 350 U - 200 L
14.17
11.22
11.53
10.43
9.45
11.46
9.45
2.95
1.38
1.50
3.94
3.94
2.76
5.75
26.57
1.02
8.19
17.64
8.74
10.43
4.17
5.30
7.20
11.30
1.375
1.51
2.76
5/16 x 5/16 x 2-1/4
1.750
1.92
3.54
18.11
6.30
29.65
42.56
1.43
9.84
0.67
16.30
42.56
0.67
16.30
21.02
10.16
33.78
16.81
3378
16.81
12.60
5.04
19.53
8.27
19.53
8.27
5.90
5.90
8.50
8.50
12.30
14.00
3/8 x 3/8 x 2-3/4
2.875
3.20
5.51
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05 15.35 27.09
3/4 x 3/4 x 3-1/2
SK 9062 15.35
8.35
2.00 12.20
4.13
1.30
4.33
19.69
- R 300 U - 256 TC 16.53
- R 375 U - 225 S
- 225 M
12.99
13.78
12.40
11.02
13.66
10.63
3.74
2.17
1.65
4.33
4.33
2.76
6.97
21.65
7.87
- R 400 U - 250 M
47.87
54.02
2.25
16.30
0.56
19.69
54.02
0.56
19.69
35.37
16.81
40.96
20.71
40.96
20.71
19.53
8.27
22.44
9.45
22.44
9.45
9.70
13.30 20.00
12.05
12.05
15.67
15.67
27.09
27.09
16.93 17.44 31.10
3.625
4.01
6.69
7/8 x 7/8 x 4-5/8
SK 9082
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
A
AA
B
BA
BC
D
DB
E
EA
EB
F
FA
FB
FC
G
H
J
JA
JB
JC
N
O
QA
QB
6.77
2.95
0.39
5.12
1.46
0.43
1.38
7.64
6.50
5.51
5.59
4.41
5.12
5.32
4.72
1.38
0.59
0.63
1.77
1.58
1.10
2.52
9.37
2.80
C D B2
EC
24.53
0.08
8.19
HF
LE
RA
ZA
16.69
8.74
10.43
4.17
4.375
4.82
8.27
1 x 1 x 5-3/4
Technical design may be subject to change. DXF files available upon request.
D24 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, FOOT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 9086
- R 500 U - 280 S
- 280 M
- 315 S
A
AA
B
BA
BC
D
DB
E
EA
EB
F
FA
FB
FC
G
H
J
JA
JB
JC
N
O
QA
QB
20.47
9.72
3.50
18.90
4.72
1.54
5.51
27.95
24.41
19.68
19.69
17.72
14.96
17.99
16.54
5.51
2.56
1.97
5.91
5.91
3.94
8.62
28.78
9.84
C D B2
EC
HF
LE
RA
ZA
AB
63.66
1.03
19.69
62.60
35.20
25.24
11.81
17.91
17.91
20.28
FP L
21.65
21.65
24.41
34.06
34.06
38.19
U UY V
Key
4.750
5.30
8.27
1-1/4x1-1/4x6-1/4
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A
AA
B
BA
BC
D
DB
E
EA
EB
EC
ED
F
FA
FB
FC
G
H
J
JA
JB
JC
JD
JE
JF
N
O
QA
QB
26.38 12.40 3.94 10.63 18.90 2.76
5.12
3.74
5.51 35.20
SK 9092
- R 500 U - 280 S
- 280 M
- 315 S
25.98
22.44
23.23
19.69
21.26
21.85
10.63
10.63
7.87
4.53
1.97
1.30
3.94
4.72
3.94
3.94
10.24
32.09 12.40
C
DB2
EC
HF
LE
RA
ZA
70.08
2.56
19.69
64.13
35.20
25.24
11.81
AB FP L
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
U UY V
Key
5.500
6.06
9.84
1-1/4x1-1/4x5-3/4
Technical design may be subject to change. DXF files available upon request.
www.nord.com
D25
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
SK 9052 VF with
AJ = 15.75 (8 holes)
SK 9012 VF thru SK 9052 VF with AJ £ 13.78 (4 holes)
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AH DB O QB C D B2 HF RA
SK 9012 VF
- R 150 U - 145 TC
SK 9082 VF
- R 375 U - 225 S
- R 400 U
- 225 M
- 250 M
- R 500 U - 280 S
- 280 M
- 315 S
AK
6.50
BD GA
0.14
0.43
5.118
7.87
0.47
BC EA Q SA
0.87
0.39
7.76
3.23
5.67
5.32
9.80
4.41
24.96
8.19
SK 9022 VF
- R 150 U - 145 TC
8.47
7.087
0.16
9.84
0.55
0.63
1.06
0.55
9.57
4.02
6.46
6.34
11.50
5.63
26.65
8.19
1.81
0.94
11.81
4.96
SK 9032 VF
- R 196 U - 182 TC
- 184 TC
8.47
0.16
0.55
7.087
or
10.43
9.055
9.84
0.16
11.81
0.63
0.55
0.79
13.78
0.20
0.71
7.87
7.72
13.11
7.09
30.20
9.84
SK 9052 VF
- R 300 U - 256 TC
- 284 TC
- 286 TC
- R 350 U - 200 L
11.811
or
15.75
15.75
0.20
0.79
8x0.71
13.780 17.72
0.87
3.50
1.61
16.81
7.28
11.42
11.42 19.09
10.32
43.54
16.30
43.54
16.30
SK 9062 VF 15.75
0.20
0.71
4.65
2.00
20.00
8.58
- R 300 U - 256 TC 13.780 17.72
0.87
13.78
13.58 22.36
12.40
48.58
16.30
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
54.72
19.69
54.72
19.69
19.69
0.20
0.71
6.42
2.05
24.33
9.45
17.717 21.65
1.10
17.72
16.54 28.35
14.76
60.08
19.69
60.08
19.69
63.23
19.69
EC
0.08
8.19
1.14
8.19
1.43
9.84
0.56
16.30
33.78
16.81
19.53
8.27
0.56
16.30
2.25
16.30
0.56
19.69
0.56
19.69
2.87
19.69
2.87
19.69
-0.48
19.69
LE
16.69
8.74
17.64
8.74
21.02
10.16
33.78
16.81
35.37
16.81
40.96
20.71
40.96
20.71
43.27
20.71
43.27
20.71
61.10
35.20
ZA
10.43
4.17
10.43
4.17
12.60
5.04
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
22.44
9.45
22.44
9.45
25.24
11.81
AB
5.30
9.70
17.91
17.91
20.28
FP
7.20
13.30
21.65
21.65
24.41
L
11.30
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
20.00
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
34.06
34.06
38.19
U UY
Key
1.250
1.36
2.36
1/4 x 1/4 x 2
1.375
1.51
2.76
5.30
7.20
11.30
5/16 x 5/16 x 2-1/4
1.750
1.92
3.54
5.90
5.90
8.50
8.50
12.30
14.00
3/8 x 3/8 x 2-3/4
2.875
3.20
3/4 x 3/4 x 3-1/2
3.625
4.01
7/8 x 7/8 x 4-5/8
4.375
4.82
1 x 1 x 5-3/4
V
5.51
6.69
8.27
Technical design may be subject to change. DXF files available upon request.
D26 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 9086 VF
- R 500 U - 280 S
- 280 M
- 315 S
SK 9092 VF
- R 500 U - 280 S
- 280 M
- 315 S
AJ BB BF AH DB O QB C D B2 HF RA
AB
AK BD GA BC EA Q SA EC LE ZA
23.62
0.24
0.87
5.71
3.50
28.34
10.43
64.25
1.03 62.60 25.24
21.654
25.98
1.26
19.13
18.11
29.37
17.72
19.69 35.20 11.81
17.91
17.91
20.28
23.62
0.24
0.87
7.36
3.94
32.09
12.20
69.88
2.56 64.13 25.24
21.654
25.98
1.26
23.23
21.85
35.00
19.68
19.69 35.20 11.81
17.91
17.91
20.28
FP
21.65
21.65
24.41
34.06
34.06
38.19
21.65
21.65
24.41
L
34.06
34.06
38.19
U UY
Key
4.750
5.30
1-1/4x1-1/4x6-1/4
5.500
6.06
V
8.27
9.84
1-1/4x1-1/4x5-3/4 www.nord.com
Technical design may be subject to change. DXF files available upon request.
D27
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AM DB Q SA C DB2 HF RA
SK 9012 AZ
- R 150 U - 145 TC
- R 300 U - 256 TC
- 284 TC
- 286 TC
- R 350 U - 200 L
AK BD BC O QB WG EC
4.53
0.12
7xM8 0.12
0.39
9.80
4.41
3.740
5.51
5.67
7.76
3.23
2.68
24.96
8.19
SK 9022 AZ 5.12
0.16
7xM8 0.16
0.55
11.50
5.63
- R 150 U - 145 TC
SK 9032 AZ
4.331
6.30
6.46
9.57
4.02
3.23
26.65
8.19
6.50
0.12
7xM10 0.20
0.94
13.11
7.09
- R 196 U - 182 TC
- 184 TC
5.118
7.87
7.87
11.81
4.96
3.82
30.20
9.84
SK 9052 AZ 10.43
0.16
7xM12 0.20
1.61
19.09
10.31
9.055
11.81
11.42
16.81
7.28
5.55
43.54
16.30
43.54
16.30
EC
0.08
8.19
1.14
8.19
1.43
9.84
0.56
16.30
33.78
16.81
19.53
8.27
0.56
16.30
LE
16.69
8.74
17.64
8.74
21.02
10.16
33.78
16.81
ZA
10.43
4.17
10.43
4.17
12.60
5.04
19.53
8.27
AB
5.30
5.30
5.90
5.90
ADH LH UYH
FP L
DH UH
5.83
1.97
1.52
7.20
11.30
1.97
1.375
5/16 x 5/16 x 4-1/4
7.09
2.36
1.67
7.20
11.30
2.17 1.500
3/8 x 3/8 x 5
8.27
2.76
2.22
8.50
8.50
12.30
14.00
2.76
2.000
1/2 x 1/2 x 5-1/2
11.81
3.94
3.04
3.94
2.750
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
5/8 x 5/8 x 8
D28
Technical design may be subject to change. DXF files available upon request.
www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 9062 AZ
- R 300 U - 256 TC
- R 375 U - 225 S
- R 400 U
- 225 M
- R 400 U - 250 M
SK 9082 AZ
- R 375 U - 225 S
- 225 M
- 250 M
- R 500 U - 280 S
SK 9086 AZ
- 280 M
- 315 S
- R 500 U - 280 S
- 280 M
- 315 S
AJ
AK
BB
BD
BF AM
BC
DB
O
Q
QB
SA
WG
11.81
0.20
7xM16 0.20
2.00
22.36
12.40
9.843
13.78
13.78
20.00
8.58
6.50
13.78
0.28
7xM16 0.32
2.05
28.35
14.76
11.811
15.75
17.72
24.33
9.45
7.68
C
48.58
D B2
EC
2.25
16.30
54.72
0.56
19.69
54.72
0.56
19.69
60.08
2.87
19.69
60.08
2.87
19.69
HF
LE
35.37
16.81
40.96
20.71
40.96
20.71
43.27
20.71
43.27
20.71
RA
ZA
19.53
8.27
22.44
9.45
22.44
9.45
22.44
9.45
22.44
9.45
AB
9.70
12.05
12.05
16.93
17.44
31.10
12.05
12.05
16.93
17.44
31.10
63.23 -0.48
19.69
61.10
35.20
25.24
11.81
17.91
17.91
20.28
15.75
0.28
7xM20 0.32
3.50
29.37
17.72
64.25
1.03 62.60 25.24
13.780
17.72
19.13
28.35
10.43
9.25
19.69 35.20 11.81
17.91
17.91
20.28
FP
13.30
15.67
15.67
15.67
15.67
21.65
21.65
24.41
21.65
21.65
24.41
L
20.00
27.09
27.09
27.09
27.09
34.06
34.06
38.19
34.06
34.06
38.19
ADH
DH
13.78
4.72
3.58
4.33
3/4 x 3/4 x 9
16.54
5.51
5.51
4.000
4.44
1 x 1 x 14-1/2
19.69
6.30
LH
UH
3.250
6.30
4.750
UYH
5.30
1-1/4 x 1-1/4 x 12 www.nord.com
Technical design may be subject to change. DXF files available upon request.
D29
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AM BC DS O Q SA C D B2 HF RA
AB
SK 9092 AZ
- R 500 U - 280 S
- 280 M
- 315 S
AK BD AS DB HS QB WG EC LE ZA
15.75
0.28 7xM20 0.40 23.23 12.99 32.09 35.00 19.68 69.88
2.56 64.13 25.24
13.780 17.72
4.33
3.94
3.39
12.20 11.34
19.69 35.20 11.81 17.91
17.91
20.28
FP L
21.65
21.65
24.41
34.06
34.06
38.19
ADH LB LH
UH UF
27.95
3.94 3.39
5.500
7.87
Shrink disc
D30
Technical design may be subject to change. DXF files available upon request.
www.nord.com
NOTES www.nord.com
D31
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FOOT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 9012
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 9022
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 9032
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
SK 9042
A
AA
B
6.77
6.50
5.51
7.48
7.40
6.54
9.06
9.57
7.68
BA
BC
D
2.95
5.59
4.41
DB
E
EA
0.39
5.12
5.32
EB
F
FA
5.12
4.72
1.38
FB
FC
G
1.46
0.59
0.63
10.23
5.91
1.42
8.66
3.03
- R 150 Z - 145 TC 11.42
- R 196 Z - 184 TC
8.66
9.84
8.35
7.09
9.45
7.09
2.17
1.18
1.26
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
3.58
0.55
5.12
1.97
6.77
5.51
4.72
6.34
5.51
1.18
1.18
0.95
4.47
0.94
7.48
2.56
7.99
7.09
7.68
7.72
6.50
1.57
0.79
0.99
H
J
JA
JB
JC
N
O
QA
QB
C D B2
EC
HF
LE
RA
ZA
0.43
1.38
7.64
1.77
1.58
1.10
2.52
9.37
2.80
0.55
2.28
9.29
2.36
1.97
1.50
2.95
11.42
3.94
27.10
28.10
29.10
2.13
5.98
31.61
1.02
8.19
14.49
6.69
17.64
8.74
9.33
3.46
10.43
4.17
0.71
2.36
11.61
2.76
2.36
1.77
3.78
12.56
4.41
29.81
30.81
31.81
32.52
34.39
36.09
38.16
39.26
3.32
5.98
2.21
8.19
1.43
9.84
1.03
10.63
15.67
6.69
18.82
8.74
21.02
10.16
21.57
10.31
9.33
3.46
10.43
4.17
12.60
5.04
13.23
5.51
0.87
2.76
13.66
3.15
2.76
1.97
4.92
14.92
5.20
25.05
26.05
27.05
1.19
5.98
29.57
0.08
8.19
13.54
6.69
16.69
8.74
9.33
3.46
10.43
4.17
35.28
2.29
8.19
38.84
2.21
9.84
40.91
42.01
1.81
10.63
19.61
8.74
21.81
10.16
22.36
10.31
44.38
0.83
12.44
25.39
12.36
10.43
4.17
12.60
5.04
13.23
5.51
15.59
6.34
AB FP L
U
UY
V
Key
1.250
5.30
7.20
9.30
1.36
5.30
5.30
7.20
7.20
10.30
11.30
2.36
5.30
7.20
11.30
1/4 x 1/4 x 2
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
5.30
7.20
11.30
1.375
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
1.51
2.76
5.30
7.20
11.30
5/16 x 5/16 x
2-1/4
1.750
1.92
3.54
5.90
5.90
7.40
7.40
5.30
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
7.20
8.50
10.30
10.30
11.30
14.00
15.60
16.70
9.70
13.30
18.20
3/8 x 3/8 x
2-3/4
2.375
2.65
4.72
5/8 x 5/8 x
3-1/4
Technical design may be subject to change. DXF files available upon request.
D32 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FOOT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions
Type
A
AA
B
BA
BC
D
DB
E
EA
EB
F
FA
FB
FC
G
SK 9052
- R 150 Z - 145 TC
12.99
6.73
1.61
11.02
3.35
14.17
11.22
11.53
10.43
9.45
11.46
9.45
2.95
1.38
1.50
- R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
SK 9062
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
15.35
8.35
2.00
12.20
4.13
- R 196 Z - 184 TC 16.53
12.99
13.78
12.40
11.02
13.66
10.63
3.74
2.17
1.65
Outline dimensions Motor dimensions Shaft dimensions
H
J
JA
JB
JC
N
O
QA
QB
1.02
3.54
16.73
3.94
3.94
2.76
5.75
18.11
6.30
1.30
4.33
19.69
4.33
4.33
2.76
6.97
21.65
7.87
C D B2
EC
HF
LE
RA
ZA
AB FP L
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
U
UY
V
Key
2.875
3.20
5.51
38.47
4.88
8.19
42.03
4.10
9.84
44.10
45.20
3.70
10.63
21.50
8.74
23.70
10.16
24.25
10.31
47.57
2.72
12.44
50.04
1.73
14.09
51.30
51.60
53.10
0.67
16.30
27.28
12.36
29.49
13.58
33.78
16.81
58.39
0.67
16.30
33.78
16.81
10.43
4.17
12.60
5.04
13.23
5.51
15.59
6.34
16.50
7.01
19.53
8.27
19.53
8.27
5.30
5.90
7.40
7.40
9.70
7.20
8.50
10.30
10.30
13.30
11.30
14.00
15.60
16.70
9.70
13.30
18.20
3/4 x 3/4 x
20.00
3-1/2
45.57
47.65
48.75
5.68
9.84
5.28
10.63
52.89
4.30
12.44
55.35
3.31
14.09
56.61
56.91
58.41
2.25
16.30
63.70
2.25
16.30
68.11
68.11
0.56
19.69
35.37
16.81
40.96
20.71
25.29
10.16
25.84
10.31
28.87
12.36
31.07
13.58
35.37
16.81
72.12
0.56
19.69
40.96
20.71
12.60
5.04
13.23
5.51
15.59
6.34
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
5.90
7.40
7.40
8.50
10.30
10.30
14.00
15.60
16.70
9.70
13.30
18.20
3.625
4.01
6.69
9.70
13.30
20.00
7/8 x 7/8 x
4-5/8
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
Technical design may be subject to change. DXF files available upon request.
www.nord.com
D33
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FOOT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions
Type
SK 9082 19.68
9.96
2.05
15.75
4.33
- R 280 Z - 256 TC 20.47
15.55
17.72
14.76
13.78
16.46
12.99
4.53
2.36
1.77
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
A
AA
B
BA
BC
D
DB
E
EA
EB
F
FA
FB
FC
G
Outline dimensions Motor dimensions Shaft dimensions
H
J
JA
JB
JC
N
O
QA
QB
1.54
4.72
24.13
5.91
4.72
3.46
8.58
27.76
8.86
C D B2
EC
HF
LE
RA
ZA
61.46
5.62
14.09
65.31
65.61
67.11
4.56
16.30
72.40
4.56
16.30
73.59
73.59
2.87
19.69
33.39
13.58
37.68
16.81
37.68
16.81
43.27
20.71
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
AB FP L
U
UY
V
Key
4.375
9.70
13.30
20.00
4.82
8.27
9.70
13.30
20.00
12.70
12.70
15.20
15.20
20.30
21.80
12.05
15.35
27.09
1 x 1 x 5-3/4
12.05
12.05
15.67
15.67
27.09
27.09
- R 400 Z - 250 M
- R 500 Z - 280 S
- 280 M
- 315 S
SK 9086 20.47
9.72
3.50
18.90
4.72
- R 280 Z - 256 TC 24.41
- R 300 Z - 256 TC
- 284 TC
- 286 TC
19.68
19.69
17.72
14.96
17.99
16.54
5.51
2.56
1.97
- R 350 Z - 200 L
- R 375 Z - 225 S
- R 400 Z
- 225 M
- 250 M
- R 500 U - 280 S
- 280 M
- 315 S
77.60
2.87
19.69
83.27
83.27
87.40
-0.48
19.69
43.27
20.71
61.10
35.20
22.44
9.45
25.24
11.81
16.93
17.44
31.10
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
1.54
5.51
27.95
5.91
5.91
3.94
8.62
28.78
9.84
62.48
7.13
14.09
66.34
66.34
68.14
6.07
16.30
73.43
6.07
16.30
34.88
13.58
39.17
16.81
39.17
16.81
16.50
7.01
19.53
8.27
19.53
8.27
9.70
13.30
20.00
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
74.61
74.61
4.38
19.69
78.62
4.38
19.69
84.30
84.30
88.43
1.03
19.69
44.76
20.71
44.76
20.71
62.60
35.20
22.44
9.45
22.44
9.45
25.24
11.81
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
4.750
5.30
8.27
1-1/4 x
1-1/4x
6-1/4
Technical design may be subject to change. DXF files available upon request.
D34 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FOOT MOUNTED, TRIPLE REDUCTION
Type
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
A
AA
B
BA
BC
D
DB
E
EA
EB
EC
ED
F
FA
FB
FC
G
H
J
JA
JB
JC
JD
JE
JF
N
O
QA
QB
C D B2
EC
SK 9092
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
- R 500 Z - 280 S
- 280 M
- 315 S
26.38 12.40 3.94 10.63 18.90 2.76
5.12
3.74
5.51 35.20
25.98
22.44
23.23
19.69
21.26
21.85
10.63
10.63
7.87
4.53
1.97
1.30
3.94
4.72
3.94
3.94
10.24
32.09 12.40
81.03
81.03
5.91
19.69
85.04
5.91
19.69
90.71
90.71
94.84
2.56
19.69
HF
LE
RA
ZA
AB FP L
U
UY
V
Key
5.500
6.06
9.84
46.30
20.71
46.30
20.71
64.13
35.20
22.44
9.45
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
16.93 17.44 31.10
25.24
11.81
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
1-1/4x1-1/4x
5-3/4 www.nord.com
Technical design may be subject to change. DXF files available upon request.
D35
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
- R 196 Z - 182 TC
SK 9042 VF
- 184 TC
- R 210 Z - 213 TC
- 215 TC
11.81
0.20
0.71
- R 150 Z - 145 TC 9.843
13.78
0.79
- R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
Gear reducer dimensions
Type
AJ
AK
BB
BD
BF
GA
SK 9012 VF
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
6.50
0.14
5.118
7.87
SK 9022 VF
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
8.47
0.16
7.087
9.84
0.43
0.47
0.55
0.63
SK 9032 VF
- R 100 Z - 56 C
- 143 TC
- 145 TC
8.47
7.087
or
10.43
0.16
9.84
0.16
0.55
0.63
0.55
- R 150 Z - 145 TC 9.055
11.81
0.79
AH
BC
0.87
5.67
1.06
6.46
1.81
7.87
2.95
9.84
DB
EA
O
Q
QB
SA
C
Outline dimensions
D B2
EC
HF
LE
RA
ZA
0.39
5.32
7.76
9.80
0.55
9.57
6.34
11.50
0.94
11.81
7.72
13.11
1.42
14.06
9.45
15.79
3.23
4.41
25.48
26.48
27.48
1.19
5.98
30.00
0.08
8.19
4.02
5.63
27.17
28.17
29.17
2.25
5.98
31.69
1.14
8.19
4.96
13.54
6.69
16.69
8.74
14.61
6.69
17.76
8.74
7.09
30.36
31.36
32.36
33.07
34.94
36.64
38.71
39.81
3.32
5.98
2.21
8.19
1.43
9.84
1.03
10.63
15.67
6.69
18.82
8.74
21.02
10.16
21.57
10.31
6.06
8.54
36.14
3.18
8.19
39.71
2.40
9.84
41.78
42.88
2.00
10.63
19.80
8.74
22.01
10.16
22.56
10.31
45.25
1.02
12.44
25.59
12.36
9.33
3.46
10.43
4.17
9.33
3.46
10.43
4.17
9.33
3.46
10.43
4.17
12.60
5.04
13.23
5.51
10.43
4.17
12.60
5.04
13.23
5.51
15.59
6.34
Motor dimensions Shaft dimensions
AB
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
FP L
U
UY
V
Key
1.250
7.20
9.30
1.36
7.20
7.20
10.30
11.30
2.36
7.20
11.30
1/4 x 1/4 x 2
7.20
7.20
7.20
9.30
10.30
11.30
7.20
11.30
1.375
7.20
7.20
7.20
9.30
10.30
11.30
1.51
2.76
7.20
11.30
5/16 x 5/16 x
2-1/4
1.750
1.92
3.54
5.30
5.30
5.30
5.30
5.90
5.90
7.40
7.40
5.30
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
3/8 x 3/8 x
2-3/4
7.20
11.30
2.375
2.65
4.72
8.50
14.00
5.90
7.40
7.40
10.30
10.30
15.60
16.70
9.70
13.30
18.20
5/8 x 5/8 x
3-1/4
Technical design may be subject to change. DXF files available upon request.
D36 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
SK 9052 with
AJ = 13.78
(4 holes)
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 9052 VF 13.78
0.20
- R 150 Z - 145 TC 11.811
or
0.71
15.75
0.79
- R 196 Z - 184 TC 15.75
13.780
0.20
17.72
0.71
0.87
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
AJ
AK
BB
BD
BF
GA
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
SK 9062 VF 15.75
0.20
0.71
- R 196 Z - 184 TC 13.780
17.72
0.87
AH
BC
DB
EA
O
Q
QB
SA
C D B2
EC
HF
LE
RA
ZA
3.50
1.61
16.81
7.28
11.42
11.42
19.09
10.32
39.45
4.77
8.19
43.02
3.99
9.84
45.09
46.19
3.59
10.63
21.38
8.74
23.58
10.16
24.13
10.31
48.55
2.61
12.44
51.02
1.62
14.09
52.28
52.58
54.08
0.56
16.30
27.17
12.36
29.37
13.58
33.66
16.81
59.37
0.56
16.30
4.65
2.00
20.00
8.58
13.78
13.58
22.36
12.40
46.28
5.68
9.84
33.66
16.81
25.29
10.16
48.36
49.46
5.28
10.63
53.59
4.30
12.44
56.06
3.31
14.09
25.84
10.31
28.87
12.36
31.07
13.58
35.37
16.81
57.32
57.62
59.12
2.25
16.30
64.41
2.25
16.30
68.82
68.82
0.56
19.69
35.37
16.81
40.96
20.71
72.83
0.56
19.69
40.96
20.71
10.43
4.17
12.60
5.04
13.23
5.51
15.59
6.34
16.50
7.01
19.53
8.27
19.53
8.27
12.60
5.04
13.23
5.51
15.59
6.34
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
AB
5.30
5.90
7.40
7.40
9.70
13.30
18.20
3/4 x 3/4 x
9.70
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
5.90
7.40
7.40
FP
7.20
8.50
10.30
10.30
13.30
8.50
10.30
10.30
L
11.30
14.00
15.60
16.70
20.00
14.00
15.60
16.70
9.70
13.30
18.20
U
UY
V
Key
2.875
3.20
5.51
3-1/2
3.625
4.01
6.69
9.70
13.30
20.00
7/8 x 7/8 x
4-5/8
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
Technical design may be subject to change. DXF files available upon request.
www.nord.com
D37
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
- R 375 Z - 225 S
- R 400 Z
- 225 M
- 250 M
- R 500 Z - 280 S
- 280 M
- 315 S
SK 9086 VF 23.62
0.24
0.87
- R 280 Z - 256 TC 21.654
25.98
1.26
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- R 400 Z
- 225 M
- 250 M
- R 500 U - 280 S
- 280 M
- 315 S
Gear reducer dimensions
Type
AJ
AK
BB
BD
BF
GA
SK 9082 VF 19.69
0.20
- R 280 Z - 256 TC 17.717
0.71
21.65
1.10
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
AH
BC
DB
EA
O
Q
QB
SA
C
Outline dimensions
D B2
EC
HF
LE
RA
ZA
6.42
2.05
24.33
9.45
17.72
16.54
28.35
14.76
62.05
5.62
14.09
65.91
66.21
67.71
4.56
16.30
73.00
74.18
74.18
4.56
16.30
2.87
19.69
33.39
13.58
37.68
16.81
37.68
16.81
43.27
20.71
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
Motor dimensions Shaft dimensions
AB FP L
U
UY
V
Key
4.375
9.70
13.30
20.00
4.82
8.27
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
1 x 1 x 5-3/4
12.05
12.05
15.67
15.67
27.09
27.09
78.19
2.87
19.69
83.86
83.86
87.99
-0.48
19.69
43.27
20.71
61.10
35.20
5.71
3.50
28.34
10.43
19.13
18.11
29.37
17.72
63.07
7.13
14.09
66.93
67.23
68.73
6.07
16.30
34.88
13.58
39.17
16.81
74.02
6.07
16.30
75.20
75.20
84.89
84.89
89.02
4.38
19.69
79.21
4.38
19.69
1.03
19.69
39.17
16.81
44.76
20.71
44.76
20.71
62.60
35.20
22.44
9.45
25.24
11.81
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
25.24
11.81
16.93
17.44
31.10
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
4.750
9.70
13.30
20.00
5.30
8.27
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
1-1/4 x 1-1/4x
6-1/4
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
Technical design may be subject to change. DXF files available upon request.
D38 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
Type
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
AJ
AK
BB
BD
SK 9092 VF
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
23.62
0.24
21.654
25.98
- R 500 Z - 280 S
- 280 M
- 315 S
BF
GA
AH
BC
DB
EA
O
Q
QB
SA
C D B2
EC
HF
LE
RA
ZA
0.87
7.36
3.94
32.09
12.20
1.26
23.23
21.85
35.00
19.68
80.83
80.83
5.91
19.69
84.84
5.91
19.69
90.52
90.52
94.65
2.56
19.69
46.30
20.71
46.30
20.71
64.13
35.20
22.44
9.45
22.44
9.45
25.24
11.81
AB FP L
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
U
UY
V
Key
5.500
6.06
9.84
1-1/4x1-1/4x
5-3/4 www.nord.com
Technical design may be subject to change. DXF files available upon request.
D39
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AM DB Q SA C D B2 HF RA
SK 9012 AZ
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 9022 AZ
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
AK
4.53
BD
0.12
3.740
5.51
7 x M8
BC
0.12
5.67
O
0.39
7.76
QB
9.80
3.23
WG
4.41
2.68
25.48
26.48
27.48
EC
1.19
5.98
30.00
0.08
8.19
5.12
0.16
7 x M8 0.16
0.55
11.50
5.63
4.331
6.30
6.46
9.57
4.02
3.23
27.17
28.17
29.17
2.25
5.98
31.69
1.14
8.19
6.50
0.12
7xM10 0.20
0.94
13.11
7.09
LE
13.54
6.69
16.69
8.74
14.61
6.69
17.76
8.74
SK 9032 AZ
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
- R 210 Z - 213 TC
- 215 TC
5.118
7.87
7.87
11.81
4.96
3.82
30.36
31.36
32.36
3.32
5.98
33.07
2.21
8.19
34.94
36.64
1.43
9.84
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
SK 9042 AZ 8.47
0.28
7xM12 0.20
1.42
15.78
8.54
- R 150 Z - 145 TC 7.087
9.84
- R 196 Z - 184 TC
38.71
39.81
1.03
10.63
9.84
14.06
6.06
4.25
36.14
3.18
8.19
39.71
2.40
9.84
41.78
42.88
2.00
10.63
- R 250 Z - 254 TC 45.25
1.02
12.44
15.67
6.69
18.82
8.74
21.02
10.16
21.57
10.31
19.80
8.74
22.01
10.16
22.56
10.31
25.59
12.36
ZA
9.33
3.46
10.43
4.17
9.33
3.46
10.43
4.17
9.33
3.46
10.43
4.17
12.60
5.04
13.23
5.51
10.43
4.17
12.60
5.04
13.23
5.51
15.59
6.34
ADH LH UYH
AB FP L
DH UH
5.83
1.97
1.52
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
1.97
1.375
5.30
7.20
11.30
5/16 x 5/16 x 4-1/4
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
5.30
7.20
11.30
7.09
2.36
1.67
2.17
1.500
3/8 x 3/8 x 5
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
5.30
7.20
11.30
8.27
2.76
2.22
2.76
2.000
1/2 x 1/2 x 5-1/2
5.90
5.90
8.50
8.50
12.30
14.00
7.40
7.40
10.30
10.30
15.60
16.70
9.45
3.15
2.55
5.30
7.20
11.30
3.15
2.375
5.90
8.50
14.00
7.40
7.40
10.30
10.30
15.60
16.70
9.70
13.30 18.20
5/8 x 7/16 x 6-1/2
Technical design may be subject to change. DXF files available upon request.
D40 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
SK 9052 AZ ........
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AM DB Q SA C D B2 HF RA
SK 9052 AZ
- R 150 Z - 145 TC
- R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
AK BD
10.43
0.16
7xM12 0.20
1.61
19.09
10.31
9.055
11.81
BC
11.42
O
16.81
QB
7.28
WG
5.55
39.45
43.02
3.99
45.09
46.19
EC
4.77
8.19
9.84
3.59
10.63
48.55
2.61
12.44
LE
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
52.28
52.58
54.08
0.56
16.30
59.37
0.56
16.30
SK 9062 AZ
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
11.81
0.20
7xM16 0.20
2.00
22.36
12.40
- R 196 Z - 184 TC 9.843
13.78
13.78
20.00
8.58
6.50
46.28
48.36
49.46
5.68
9.84
5.28
10.63
53.59
4.30
12.44
- R 280 Z - 256 TC
51.02
1.62
14.09
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
56.06
3.31
14.09
57.32
57.62
59.12
2.25
16.30
64.41
2.25
16.30
68.82
68.82
0.56
19.69
- R 400 Z - 250 M 72.83
0.56
19.69
33.66
16.81
25.29
10.16
25.84
10.31
28.87
12.36
31.07
13.58
35.37
16.81
35.37
16.81
40.96
20.71
40.96
20.71
21.38
8.74
23.58
10.16
24.13
10.31
27.17
12.36
29.37
13.58
33.66
16.81
ZA
10.43
4.17
12.60
5.04
13.23
5.51
15.59
6.34
16.50
7.01
19.53
8.27
19.53
8.27
12.60
5.04
13.23
5.51
15.59
6.34
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
AB
5.90
7.40
7.40
9.70
13.30 18.20
9.70
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35 27.09
5.90
7.40
7.40
9.70
13.30 18.20
9.70
FP
8.50
10.30
10.30
8.50
10.30
10.30
L
14.00
15.60
16.70
13.30 20.00
14.00
15.60
16.70
13.30 20.00
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35 27.09
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44 31.10
ADH
DH
11.81
4.33
LH
UH
3.94
5.30
7.20
11.30
3.94
2.750
UYH
3.04
5/8 x 5/8 x 8
13.78
4.72
3.58
3.250
3/4 x 3/4 x 9
Technical design may be subject to change. DXF files available upon request.
www.nord.com
D41
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AM DB Q SA C D B2 HF RA
SK 9082 AZ
- R 280 Z - 256 TC
- R 300 Z - 256 TC
- R 400 Z
- 284 TC
- 286 TC
- R 350 Z - 200 L
- R 375 Z - 225 S
- 225 M
- 250 M
AK BD BC O QB WG EC
13.78
0.28
7xM16 0.32
2.05
28.35
14.76
11.811
15.75
17.72
24.33
9.45
7.68
62.05
5.62
14.09
65.91
66.21
67.71
4.56
16.30
73.00
4.56
16.30
74.18
74.18
2.87
19.69
78.19
2.87
19.69
83.86
83.86
87.99
-0.48
19.69
LE
33.39
13.58
37.68
16.81
- R 500 Z - 280 S
- 280 M
- 315 S
SK 9086 AZ
- R 280 Z - 256 TC 13.780
17.72
- R 300 Z - 256 TC
- 284 TC
- 286 TC
- R 350 Z - 200 L
15.75
0.28
7xM20 0.32
3.50
29.37
17.72
19.13
28.35
10.43
9.25
63.07
66.93
67.23
68.73
74.02
7.13
14.09
6.07
16.30
6.07
16.30
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
- R 500 U - 280 S
- 280 M
- 315 S
75.20
75.20
84.89
84.89
89.02
4.38
19.69
79.21
4.38
19.69
1.03
19.69
34.88
13.58
39.17
16.81
39.17
16.81
44.76
20.71
44.76
20.71
62.60
35.20
37.68
16.81
43.27
20.71
43.27
20.71
61.10
35.20
ZA
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
25.24
11.81
16.50
7.01
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
25.24
11.81
AB
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35 27.09
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44 31.10
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35 27.09
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44 31.10
17.91
17.91
20.28
FP
21.65
21.65
24.41
L
34.06
34.06
38.19
ADH
DH
16.54
LH
UH
5.51
9.70
13.30 20.00
5.51
4.000
UYH
4.44
1 x 1 x 14-1/2
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
19.69
6.30
5.30
9.70
13.30 20.00
6.30
4.750
1-1/4 x 1-1/4 x 12
Technical design may be subject to change. DXF files available upon request.
D42 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
Z -DESIGN, SHAFT MOUNTED, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 9092 AZS
- R 375 Z - 225 S
- 225 M
- R 400 Z - 250 M
- R 500 Z - 280 S
- 280 M
- 315 S
AJ
AK
BB
BD
BF
AM
AS
BC
DB
DS
HS
O Q
QB
SA
WG
C
15.75
0.28
0.40 23.23 12.99 32.09 35.00 19.68
13.780
17.72
7xM20
4.33
3.94
3.39
12.20 11.34 80.83
80.83
D B2
EC
HF
LE
5.91
19.69
46.30
20.71
84.84
5.91
19.69
90.52
90.52
94.65
2.56
19.69
46.30
20.71
64.13
35.20
RA ADH LB LH
AB FP L
ZA
22.44
9.45
12.05
12.05
15.67
15.67
27.09
27.09
16.93 17.44 31.10
22.44
9.45
25.24
11.81
17.91
17.91
20.28
21.65
21.65
24.41
34.06
34.06
38.19
UH UF
27.95
3.94
3.39
5.500
7.87
Shrink disc www.nord.com
Technical design may be subject to change. DXF files available upon request.
D43
NOTES
D44 www.nord.com
VARIABLE SPEED WORM GEAR UNITS www.nord.com
E1
VARIABLE SPEED WORM GEAR UNITS
NOMENCLATURE
VARIABLE SPEED TYPE GEAR TYPE
FOOT MOUNTED EXECUTION
SK 02040 - SK 42125 = Worm Gearboxes, double reduction
FLANGE MOUNTED EXECUTION
SK 02040 F - SK 42125 F = Worm Gearboxes, double reduction
SHAFT MOUNTED EXECUTION
SK 02040 A - SK 42125 A = Worm Gearboxes, double reduction
WORM GEAR UNITS - OPTIONS see catalog 1000
R 100 U
R 150 U
R 196 U
R 210 U Variable speed drives U design
R 250 U
R 280 U
R 100 Z
R 150 Z
R 196 Z
R 210 Z Variable speed drives Z design
R 250 Z
R 280 Z
STANDARD TYPE
Variable speed worm geared motor
U - design (affix: U), with control gear type ZV
E2
Variable speed worm geared motor
Z - design (affix: Z), with control gear type ZV www.nord.com
VARIABLE SPEED WORM GEAR UNITS
SPEED CONTROLS
= Speed control ZV
WST = Angular control
EMFST= Electromechanical remote control
MOTOR
C - face
1/3 - 20 HP
56 C - 256 TC
NOMENCLATURE
MOTOR OPTIONS
BRE = with brake SR = Brake dust-proof
DG = Incremental encoder
HL = Brake motor with hand release TW = Thermal trip
R = Backstop WE = 2 nd motor shaft end
RG = Brake corrosion-protected
TF = Thermistor
SPEED INDICATORS
BLA = Non contacting speed indicator, analogue
BLD = Non contacting speed indicator, digital
FAA = EMFST with remote speed indicator, analogue
FAD = EMFST with remote speed indicator, digital
EXAMPLE FOR ORDERING
SK 32100 F - R 196 U - 184 TC
C-face motor / three phase 5 HP
Varialble speed gear type, design U
Flange mounted
Helical Worm Gear Motor, 2 reductions www.nord.com
E3
E4
U
VARIABLE SPEED WORM GEAR UNITS
Z
MOUNTING POSITIONS
FOOT MOUNTED
U
Z
U
B 3 U (Z)
Z
B 6 I U (Z)
Symbols: Vent plug
U
B 3 I U (Z)
Z
Z
B 6 U (Z)
U
U
Z
B 8 U (Z)
Z
U
B 6 II U (Z)
Drain plug
Z
B 8 I U (Z)
Oil level
POSITION OF TERMINAL BOX AND CABLE ENTRY
Please specify position of terminal box and cable entry!
Normal design: Cable entry at 3, terminal box at I or III only.
If other position are required, please specify exactly when ordering.
I
2
III
I
IV
I
II
1
I
3
B A
U
V 5 U (Z)
Z
V 5 I U (Z)
Mounting surface
U
In all mounting positions the variable speed drive may be mounted at an angle of 90
0
.
B 3 U
1
I
B 3/2 U I 1
1 I
B 3/1 U www.nord.com
FLANGE MOUNTED
VARIABLE SPEED WORM GEAR UNITS
MOUNTING POSITIONS
U
Z
U
Z
B 5 U (Z)
Z
U
B 5 II U (Z)
B 5 I U (Z)
U Z
Symbols:
SHAFT MOUNTED
Vent plug
U
V 1 U (Z)
Drain plug
Z
H 1 U (Z)
Z
Z
B 5 III U (Z)
Oil level
Z
V 3 U (Z)
U
U
Mounting surface
Z
H 2 U (Z)
U
U www.nord.com
U
U
H 3 U (Z)
Z
H 5 U (Z)
Z
H 4 U (Z)
Z
H 6 U (Z)
U
E5
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
8.3
9.6
11.8
13.4
15.0
19
22
25
3.3
4.0
4.5
5.2
5.9
6.7
28
32
40
46
52
59
66
4.2
4.8
5.3
6.5
7.4
8.4
10.0
11.3
1.2
1.5
1.7
1.9
2.9
3.5
3.9
12.7
15.0
18
20
22
27
31
35
24
27
35
39
16
17
18
21
6.7
7.7
7.8
8.9
10.1
11.4
12.9
14.9
45
51
58
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. Ratio
High f
B1
Low f
B2 i ges
Type
1195
1018
903
664
593
532
437
385
370
325
290
238
206
194
170
150
123
107
93.8
85.8
77.0
837
764
680
574
512
462
444
397
2443
2106
1876
1699
1381
1186
1035
354
294
261
232
220
181
161
142
279
212
235
205
183
162
126
121
499
533
439
390
349
308
357
244
105
93.8
83.2
0.50
6.2
7.3
8.3
63
77
88
99
37
42
50
56
9.3
14.6
17
20
21
24
27
33
111
135
153
173
76
94
109
125
42
48
59
67
17
20
23
26
30
34
142
161
199
229
262
293
332
82
86
92
105
119
135
176
197
50
57
64
74
34
38
39
44
226
257
291
1.0
1.0
1.0
1.0
1.0
1.2
1.4
1.3
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.7
2.0
2.2
2.4
2.1
2.3
1.0
1.0
1.0
1.2
1.3
1.4
1.3
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.8
2.0
2.1
2.1
2.4
2.7
2.9
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.7
1.9
3.1
3.5
3.8
4.3
1.9
2.1
2.7
2.9
1.1
1.3
1.4
1.5
1.6
1.7
4.7
5.1
5.8
6.2
6.6
6.7
7.0
3.3
3.4
3.9
4.2
2.5
2.6
2.8
3.1
1.1
1.3
1.4
1.5
1.7
1.9
2.2
4.5
5.0
5.4
5.7
6.2
6.9
7.4
7.9
2.5
2.7
3.1
4.4
2.5
1.8
2.1
2.4
1.4
1.5
2.0
1.7
1.1
1.2
1.2
1.3
4.8
5.1
5.4
1540
1522
1513
1407
1381
1363
1319
1283
1398
1372
1301
1071
938
912
801
706
579
503
444
412
368
2929
2885
2761
2310
2062
1867
1965
1761
3221
3195
3177
3151
2761
2744
2717
1566
1301
1159
1044
1018
842
740
665
858
655
735
717
708
690
581
568
761
797
752
735
726
708
876
673
504
443
390
231.41
194.18
170.10
147.90
130.05
114.75
92.82
80.58
65.25
57.38
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
626.79
529.38
464.61
413.10
264.24
223.17
195.86
183.60
162.18
144.33
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
115.05
100.65
99.45
86.97
76.44
67.47
59.83
51.87
46.79
44.85
42.08
36.80
32.34
28.55
21.95
19.56
17.10
15.03
13.27
SK 12063 - R100 Z - 56 C
SK 02050 - R100 U/Z - 56 C
SK 02040 - R100 U/Z - 56 C
Weight (460 V) approx.
I
N
[Lbs] [A] i
Regel
90 1.1
5.00
82
65
1.1
1.1
5.00
5.00
E6 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
76
87
103
116
152
175
1.4
1.1
1.6
1.2
1.4
1.6
1.7
1.8
2.1
2.9
3.8
4.1
4.4
4.5
2.5
2.9
3.2
3.4
4.7
5.3
5.7
6.1
1.8
2.0
2.1
2.4
1.1
1.2
1.3
1.4
5.2
5.7
6.1
6.8
3.8
4.1
4.6
4.9
7.3
7.7
8.3
2.2
2.3
2.6
2.8
3.0
3.4
3.6
1.1
1.3
1.4
1.7
1.7
1.9
2.1
876
673
858
655
735
717
708
690
655
788
1274
1221
1195
1062
868
753
666
618
1381
1363
1319
1283
1398
1372
1354
1310
551
446
388
342
1566
1522
1266
1106
1000
859
739
605
538
478
412
2699
2637
2505
2460
2354
1956
1743
2761
2744
2717
2929
2885
2841
2752
12.9
14.9
16
17
18
21
24
27
35
39
66
82
94
108
40
46
52
59
22
25
28
32
5.9
6.7
8.3
9.6
11.8
13.4
15.0
19
35
41
50
60
20
22
27
31
69
77
91
7.4
8.4
10.0
11.3
12.7
15.0
18
2.9
3.5
3.9
4.2
4.8
5.3
6.5
535
366
419
317
353
309
274
242
189
181
310
290
255
225
184
160
142
129
894
797
656
578
554
488
435
357
115
93.8
81.4
70.8
348
331
272
242
214
182
155
128
112
100
85.0
769
693
666
596
530
440
392
2071
1770
1558
1257
1142
1018
862
0.50
378
437
514
582
758
877
64
74
82
86
92
105
119
135
176
197
109
125
142
161
199
229
262
293
332
410
472
541
59
67
76
94
30
34
42
48
0.75
14.6
17
20
63
77
88
99
111
135
153
37
42
50
56
21
24
27
33
173
203
248
302
344
387
455
64.6
55.8
49.6
43.4
33.6
29.2
304
266
235
210
161
141
6.2
6.7
5.4
5.9
6.6
7.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.5
1.6
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.6
1.8
2.1
2.3
1.4
1.4
1.6
1.8
1.9
2.2
2.0
2.4
2.6
2.9
3.2
1.0
1.0
1.0
1.0
1.0
1.2
1.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.3
2.6
1.9
2.1
2.5
2.8
10.20
8.82
7.51
6.63
5.09
4.40
SK 02040 - R100 U/Z - 56 C
59.83
51.87
46.79
44.85
42.08
36.80
32.34
28.55
21.95
19.56
130.05
114.75
92.82
80.58
65.25
57.38
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
264.24
223.17
195.86
183.60
162.18
144.33
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
SK 12063 - R100 Z - 56 C
SK 02050 - R100 U/Z - 56 C
SK 02040 - R100 U/Z - 56 C
Weight (460 V) approx.
I
N
[Lbs] [A] i
Regel
65 1.1
5.00
90
82
65
1.6
1.6
1.6
5.00
5.00
5.00
www.nord.com
E7
VARIABLE SPEED WORM GEARED MOTORS
176
197
226
257
291
378
437
82
92
105
119
135
142
161
199
229
262
293
332
410
472
541
59
67
76
94
109
125
1.00
20
21
24
27
88
99
111
135
153
173
203
248
33
37
42
50
56
63
77
302
344
387
455
519
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
0.75
226
257
291
378
437
514
582
758
877
45
51
58
76
87
103
116
152
175
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. Ratio
High f
B1
Low f
B2 i ges
Type
158
141
125
96.5
84.1
73.5
65.5
49.6
43.4
755
664
586
456
399
352
314
242
212
3.2
3.4
3.6
4.1
4.4
3.6
3.9
4.5
4.7
1.0
1.1
1.3
1.5
1.7
1.3
1.4
1.7
1.8
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
SK 02040 - R100 U/Z - 56 C
35
39
45
51
58
76
87
16
18
21
24
27
52
59
66
82
28
32
40
46
94
108
11.8
13.4
15.0
19
22
25
11.3
12.7
15.0
18
20
22
27
3.9
4.2
4.8
5.3
6.5
7.4
8.4
10.0
60
69
77
91
31
35
41
50
104
252
242
212
188
165
129
112
558
471
412
366
323
739
650
581
476
413
387
340
300
246
213
189
173
154
125
108
94.7
795
707
587
523
464
442
362
2071
1673
1531
1363
1151
1027
920
885
322
286
243
206
171
150
134
113
99.1
1.5
2.2
2.4
2.5
2.7
3.1
3.3
1.2
1.1
1.2
1.3
1.3
3.3
3.3
3.5
4.0
2.4
2.6
2.9
3.1
4.3
4.6
1.4
1.5
1.6
1.8
1.9
2.2
2.1
2.3
2.5
2.7
2.9
3.1
3.5
1.5
1.6
1.7
2.0
1.1
1.2
1.3
1.4
5.1
5.5
5.8
6.2
3.7
3.9
4.3
4.6
6.7
655
788
770
752
710
552
483
858
735
717
708
690
1398
1372
1354
1310
1274
1221
1195
1177
1053
912
806
749
668
541
470
414
2460
2425
2345
2106
1903
1841
1531
2717
2929
2885
2841
2752
2699
2637
2505
1345
1212
1044
894
734
652
579
498
437
Weight (460 V) approx.
[Lbs]
65
1.0
1.0
1.0
1.0
1.0
1.3
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.3
1.2
1.3
1.5
1.7
1.9
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.1
1.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.6
1.8
1.7
2.0
2.2
2.4
2.7
2.9
46.79
42.08
36.80
32.34
28.55
21.95
19.56
17.10
15.03
13.27
10.20
8.82
65.25
57.38
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
195.86
183.60
162.18
144.33
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
SK 12063 - R100 Z - 143 TC
SK 02050 - R100 U/Z - 143 TC
SK 02040 - R100 U/Z - 143 TC
104
95
79
I
N
[A]
1.6
2.1
2.1
2.1
i
Regel
5.00
5.00
5.00
5.00
E8 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
103
116
152
175
2.3
2.5
2.6
2.8
1.7
1.8
1.9
2.1
1.1
1.1
1.3
1.4
1.5
3.1
3.4
3.6
3.8
4.2
4.4
2.7
2.9
3.2
3.5
1.9
2.1
2.4
2.5
3.7
4.0
4.3
4.6
1.5
1.5
1.7
1.8
1.1
1.1
1.2
1.4
2.2
2.2
2.3
2.7
2.8
3.1
1.2
1.3
1.4
1.6
1.7
1.9
2.1
1.5
1.6
1.7
1.8
2699
2637
2505
2460
2425
2345
2106
1903
1841
1531
1345
1212
1044
894
734
652
579
498
437
2301
2142
2080
2027
1982
1841
1540
1319
2814
2761
2699
2540
2505
2469
2398
2345
1159
1035
883
784
1310
1274
1221
1195
1177
1053
912
806
749
668
541
470
414
788
770
752
710
50
60
69
77
91
104
7.4
8.4
10.0
11.3
12.7
27
31
35
41
15.0
18
20
22
30
36
43
53
17
19
24
27
60
68
80
91
5.7
6.5
7.3
8.7
9.9
11.1
13.6
15.0
52
59
66
82
94
108
19
22
25
28
32
40
46
39
45
51
58
1540
1389
1336
1195
1062
881
784
696
662
543
483
428
365
309
257
226
200
170
150
669
629
516
458
407
350
294
243
1637
1460
1319
1266
1133
1018
847
745
214
190
162
142
282
258
231
187
162
142
714
620
581
511
450
368
320
363
317
282
249
1.00
514
582
758
877
262
293
332
410
472
541
94
109
125
142
161
199
229
197
226
257
291
104
116
142
161
182
214
261
318
362
408
479
546
59
67
81
93
34
39
44
52
1.50
37
135
153
173
203
248
302
344
77
88
99
111
42
50
56
63
387
455
519
98.2
86.7
66.4
58.4
427
381
293
256
2.7
3.0
3.3
3.5
1.0
1.1
1.4
1.5
1.0
1.1
1.2
1.1
1.3
1.5
1.6
1.8
1.0
1.0
1.0
1.0
1.0
1.7
2.0
2.2
2.4
2.7
2.9
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.3
1.4
1.6
1.7
1.3
1.2
1.3
1.5
1.7
1.9
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.0
1.0
1.0
1.0
Weight (460 V) approx.
[Lbs]
7.51
6.63
5.09
4.40
SK 02040 - R100 U/Z - 143 TC 79
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
19.56
17.10
15.03
13.27
SK 12063 - R100 Z - 145 TC
SK 12063 - R150 U/Z - 145 TC
SK 02050 - R100 U/Z - 145 TC
SK 02040 - R100 U/Z - 145 TC
104
128
95
79
I
N
[A]
2.1
3.0
3.0
3.0
3.0
i
Regel
5.00
5.00
6.00
5.00
5.00
www.nord.com
E9
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. Ratio
High f
B1
Low f
B2 i ges
Type
1.50
378
437
514
582
758
877
2.00
63
77
88
99
111
135
153
173
203
248
302
344
387
455
519
262
293
332
410
472
541
125
142
161
199
229
142
161
182
214
261
318
362
408
479
546
59
67
81
93
104
116
437
514
582
758
877
197
226
257
291
378
76
87
103
116
152
175
1.7
1.4
1.5
1.7
1.7
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.1
2.3
1.1
1.2
1.3
1.4
1.6
2.4
2.6
2.8
3.0
1.8
1.9
2.0
2.2
3.2
3.4
1.1
1.1
1.3
1.4
1.4
1.6
2.0
2.1
2.3
2.5
2.7
2.9
3.1
3.3
1.1
1.3
1.3
1.4
1.5
1.7
1.8
483
427
381
293
256
788
770
752
710
552
1221
1195
1177
1053
912
806
749
668
541
470
414
2505
2469
2398
2345
2301
2142
2080
2027
1982
1841
1540
1319
1159
1035
883
784
1212
1044
894
734
652
579
498
437
2425
2345
2106
1903
1841
1531
1345
87
103
116
152
175
39
45
51
58
76
52
59
66
82
94
108
25
28
32
40
46
43
53
60
68
24
27
30
36
80
91
9.9
11.1
13.6
15.0
17
19
35
41
50
60
69
77
91
104
12.7
15.0
18
20
22
27
31
223
196
173
134
117
483
423
376
332
258
377
345
308
250
216
189
773
681
601
491
427
1513
1363
1133
991
894
839
688
612
543
467
392
325
286
253
215
189
572
486
412
342
300
266
227
199
1416
1177
1044
929
883
724
643
194
167
148
130
100
87.6
552
483
427
381
293
256
2.1
2.2
1.8
2.0
2.2
2.3
1.4
1.0
1.1
1.4
1.5
1.0
1.0
1.0
1.0
1.3
1.3
1.2
1.3
1.5
1.7
1.9
1.0
1.0
1.0
1.1
1.2
1.0
1.0
1.0
1.0
1.0
1.1
1.3
1.4
1.6
1.7
1.0
1.0
1.0
1.0
1.0
1.0
1.6
1.8
1.7
2.0
2.2
2.4
2.7
2.9
1.0
1.0
1.1
1.2
1.1
1.3
1.5
1.3
1.4
1.0
1.1
1.4
1.5
10.20
8.82
7.51
6.63
5.09
4.40
SK 02040 - R100 U/Z - 145 TC
Weight (460 V) approx.
[Lbs]
79
19.56
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
SK 12063 - R100 Z - 145 TC
SK 12063 - R150 U/Z - 145 TC
SK 02050 - R100 U/Z - 145 TC
SK 02040 - R100 U/Z - 145 TC
104
128
95
79
I
N
[A]
3.0
3.4
3.4
3.4
3.4
i
Regel
5.00
5.00
6.00
5.00
5.00
E10 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
6.5
8.5
9.4
12.1
14.2
16
18
20
2.5
3.3
3.7
4.7
5.9
39
46
57
67
25
30
32
36
89
35
42
48
54
21
24
27
31
8.6
10.2
11.6
13.0
15.0
18
63
71
90
36
40
44
51
63
20
22
28
33
10.5
13.4
16
18
2.8
3.7
4.1
5.2
6.5
7.2
9.5
19
24
27
7638
6062
5540
4443
3629
3637
2797
2549
2009
1770
1602
1389
1257
1018
870
812
740
657
577
466
394
301
2682
2283
2027
1814
1575
1398
1177
1044
929
802
713
617
541
482
415
369
295
2301
1814
1602
1443
1248
1133
929
784
6992
5540
5000
4000
3275
3275
2549
740
667
592
520
419
1257
1035
920
15.0
20
22
28
35
85
95
107
122
39
51
57
73
151
178
193
214
236
274
340
402
532
127
145
162
189
212
254
290
325
51
61
70
78
91
107
378
425
538
3.00
17
22
25
118
135
167
198
214
237
262
304
378
63
81
95
105
31
39
43
57
116
142
161
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
1.0
1.1
1.2
1.4
1.4
1.5
1.9
1.9
1.0
1.0
1.0
1.0
1.0
2.2
2.4
1.5
1.6
2.9
2.2
2.7
3.1
3.9
1.4
1.6
1.7
1.9
2.0
1.7
1.7
1.8
1.0
1.0
1.0
1.1
1.2
1.2
1.9
2.0
2.1
1.7
2.1
2.1
2.3
2.7
2.7
3.2
3.6
1.0
1.0
1.1
1.3
1.4
1.3
1.6
2.3
2.5
4.3
3.3
4.0
1.0
1.0
1.0
3.1
3.2
3.2
3.7
1.9
2.3
2.4
2.7
1.1
1.2
1.3
1.5
1.6
4.9
5.6
6.2
6.7
4.1
4.3
4.7
4.9
7.4
2.8
3.1
3.3
3.5
2.2
2.3
2.5
2.6
1.3
1.4
1.5
1.6
1.7
2.0
3.8
4.0
4.4
3.4
3.9
4.2
4.5
2.5
2.8
3.2
3.4
1.1
1.3
1.4
1.5
1.7
2.1
2.4
4.9
5.2
5.1
5.9
6.5
1.1
1.2
1.3
12355
11930
11753
11284
10824
10673
9558
8620
6903
6345
5726
4832
4514
3682
3159
3018
2726
2443
2151
1752
1478
1133
5292
5160
5027
4558
3965
3637
3098
2717
2460
2142
1903
1664
1460
1301
1133
1009
805
12195
11753
10912
8815
7354
8133
6266
5726
4584
4160
3797
3213
3000
2443
2097
1982
1805
1602
1407
1151
2142
2080
2027
Weight (460 V) approx.
[Lbs]
241.50
183.50
165.50
129.00
104.00
94.19
71.57
64.55
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
15.52
13.34
10.75
9.10
7.19
78.91
66.44
58.27
52.03
44.72
37.91
31.92
27.99
25.00
21.49
19.11
15.98
14.01
12.51
10.75
9.56
7.55
241.50
183.50
165.50
129.00
104.00
94.19
71.57
64.55
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
15.52
13.34
10.75
34.89
28.61
25.15
SK 32100 - R150 Z - 145 TC
SK 32100 - R196 U/Z - 182 TC
SK 12080 - R150 U/Z - 145 TC
SK 12063 - R150 U/Z - 145 TC
236
249
179
157
I
N
[A]
4.8
4.8
4.8
4.8
i
Regel
6.00
6.00
6.00
6.00
www.nord.com
E11
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. Ratio
High f
B1
Low f
B2 i ges
Type
5.2
6.1
7.0
7.9
8.8
10.8
12.7
2.5
3.0
3.3
3.8
4.2
28
32
38
42
14.9
17
19
24
36
39
46
57
20
25
30
32
67
89
6.5
8.5
9.4
12.1
14.2
16
18
3.00
182
214
261
318
362
408
479
546
5.00
14.8
53
65
76
89
104
115
142
166
195
230
251
31
36
42
48
18
20
23
25
122
151
178
193
214
236
274
340
402
532
39
51
57
73
85
95
107
30
36
43
53
60
68
80
91
1.6
1.7
2.1
2.2
2.3
2.5
2.7
1.1
1.2
1.3
1.4
1.4
4.6
4.9
5.3
5.4
2.9
3.7
3.9
4.2
3.0
2.9
3.4
3.7
2.2
2.5
2.6
2.8
4.0
4.4
1.2
1.4
1.4
1.6
1.8
1.9
1.9
23718
21028
19019
17054
15620
13328
11594
11815
10558
9505
7921
6868
5921
5425
4885
4018
3478
2991
2593
2345
10673
9558
8620
6903
6345
5726
4832
4514
3682
3159
3018
2726
2443
2151
1752
1478
1133
14018
11726
10602
9470
8646
7107
6160
5823
5133
4673
3841
3283
2797
2496
2248
1841
1575
1345
1159
1035
2097
1690
1451
1354
1230
1097
965
775
656
502
6062
4664
4257
3354
2956
2664
2319
814
701
588
487
428
380
323
283
1982
1841
1540
1319
1159
1035
883
784
1.3
1.4
1.6
1.7
1.9
2.0
2.1
2.3
1.6
1.8
1.7
1.8
2.0
2.3
2.6
1.0
1.1
1.2
1.3
1.4
2.9
2.0
2.7
3.3
3.8
4.3
2.7
5.4
1.9
2.2
2.4
1.5
1.6
2.9
2.2
2.7
3.1
3.9
1.0
1.1
1.2
1.4
1.4
1.5
1.9
1.0
1.0
1.0
1.1
1.3
1.4
1.6
1.7
Weight (460 V) approx.
[Lbs]
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
SK 12063 - R150 U/Z - 145 TC 157
247.69
201.63
182.36
160.74
144.76
117.50
100.58
87.30
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
18.80
15.92
14.57
94.19
71.57
64.55
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
15.52
13.34
10.75
9.10
7.19
SK 42125 - R196 Z - 184 TC only available with footed housing
SK 32100 - R196 U/Z - 184 TC
368
265
I
N
[A]
4.8
7.6
7.6
i
Regel
6.00
6.00
6.00
7.50
32
38
43
49
107
119
146
171
55
67
78
92
201
237
259
18
20
24
28
34
40
43
5.4
6.3
7.2
8.2
9.1
11.2
13.1
15.0
10452
8947
8452
7540
6788
5576
4770
4106
3620
3257
2673
2292
1947
1682
1522
20523
18143
18204
16266
14647
12204
10585
9116
8363
7531
6186
5354
4611
3991
3611
2.5
2.6
2.9
3.1
3.3
3.6
3.6
1.6
1.7
1.9
2.0
1.1
1.1
1.4
1.5
1.3
1.8
2.1
2.4
2.8
1.8
3.5
1.0
1.1
1.1
1.2
1.3
1.5
1.7
1.9
117.50
100.58
87.30
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
18.80
15.92
14.57
SK 42125 - R210 Z - 213 TC only available with footed housing
410 11 6.00
E12 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
10.0
110
126
156
184
199
221
244
283
352
415
549
92
107
119
146
171
201
237
259
38
43
49
55
67
78
292
342
402
15.0
237
259
292
342
402
78
92
107
119
146
171
201
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
7.50
292
342
402
199
221
244
283
352
415
549
75
88
98
110
126
156
184
49
57
67
33
37
41
47
59
69
92
12.5
14.7
16
18
21
26
31
1372
1168
1000
1965
1788
1593
1398
1124
956
728
4876
4292
3867
3363
3053
2460
2106
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. ratio
High f
B1
Low f
B2 i ges
Type
3.9
4.2
4.5
1.9
2.0
2.0
2.3
2.5
2.7
3.0
1.1
1.2
1.3
1.3
1.5
1.7
1.8
3283
2805
2416
4646
4195
3761
3310
2699
2283
1743
9638
8868
8726
7540
6956
5673
4859
2.1
2.4
2.8
1.0
1.1
1.9
1.4
1.7
2.0
2.6
1.0
1.0
1.0
1.2
1.2
1.4
1.6
12.93
11.06
9.41
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
15.52
13.34
10.75
9.10
7.19
SK 42125 - R210 Z - 213 TC only available with footed housing
SK 32100 - R210 Z - 213 TC
Weight (460 V) approx.
I
N
[Lbs] [A] i
Regel
410
306
11
11
6.00
6.00
40
43
49
57
67
13.1
15.0
18
20
24
28
34
4381
4071
3283
2805
2620
2390
2124
1859
1505
1274
974
10142
11275
10054
9054
7434
6363
5469
4823
4345
3567
3053
2593
2248
2036
1823
1558
1328
33
37
41
47
18
21
26
31
59
69
92
28
34
40
43
15.0
18
20
24
6.3
7.2
8.2
9.1
11.2
13.1
49
57
67
8859
8098
7239
6522
5354
4584
3894
3372
3053
2735
2345
1991
1.4
1.5
1.5
1.7
1.0
1.1
1.2
1.3
1.9
2.0
2.2
2.3
2.5
2.7
2.7
1.5
1.9
2.0
2.2
1.0
1.1
1.1
1.2
1.3
1.4
3.0
3.2
3.4
7540
6956
5673
4859
4646
4195
3761
3310
2699
2283
1743
18143
18204
16266
14647
12204
10585
9116
8363
7531
6186
5354
4611
3991
3611
3283
2805
2416
15116
13018
10744
10762
8841
7655
6584
5699
5160
4682
4009
3443
1.8
1.8
2.0
2.1
2.2
1.0
1.0
1.2
1.3
1.4
1.5
1.6
1.2
2.4
1.5
1.7
2.0
1.2
1.3
1.0
1.2
1.5
1.7
2.0
1.2
1.2
1.4
1.6
1.0
1.1
1.9
1.4
1.7
2.0
2.6
1.9
1.3
1.8
2.1
2.4
2.8
1.8
3.5
1.1
1.1
1.2
1.3
1.5
1.7
2.1
2.4
2.8
34.32
30.11
24.27
20.54
18.97
17.11
15.52
13.34
10.75
9.10
7.19
100.58
87.30
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
18.80
15.92
14.57
12.93
11.06
9.41
SK 42125 - R210 Z - 215 TC only available with footed housing
SK 32100 - R210 Z - 215 TC
423
320
48.15
40.95
35.33
31.82
25.83
22.11
18.80
15.92
14.57
12.93
11.06
9.41
SK 42125 - R250 Z - 254 TC 600
14
14
21
6.00
6.00
6.00
www.nord.com
E13
VARIABLE SPEED WORM GEARED MOTORS
P n
[HP]
Output speed
High n
21
[rpm]
Low n
22
[rpm]
15.0
448
487
518
275
321
377
421
457
487
100
112
137
161
189
223
244
75
81
86
46
53
63
70
76
81
17
19
23
27
31
37
41
1788
1646
1558
7708
6938
5699
4876
4151
3584
3213
2912
2496
2124
1903
1752
1646
TITAN
TM
ADJUSTABLE SPEED BELT DRIVES
SELECTIONS
THREE PHASE
Output torque
High
T a1
[LB-IN.]
Low
T a2
[LB-IN.]
Service factor Red. Ratio
High f
B1
Low f
B2 i ges
Type
3089
2841
2699
10620
13204
13125
12222
10514
7000
8239
6876
6399
5505
4929
4540
4266
2.3
2.4
2.4
1.9
2.0
2.2
2.3
2.4
2.4
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.2
2.3
2.4
1.0
1.1
1.2
1.4
1.4
1.5
1.0
1.0
1.0
1.1
1.2
1.0
1.5
Weight (460 V) approx.
[Lbs]
35.33
31.82
25.83
22.11
18.80
15.92
14.57
12.93
11.06
9.41
8.43
7.76
7.29
8.43
7.76
7.29
SK 42125 - R250 Z - 254 TC
SK 42125 - R280 U/Z - 254 TC only available with footed housing
600
617
I
N
[A]
21
21 i
Regel
6.00
6.00
20.0
161
189
223
244
275
321
377
421
457
487
27
31
37
41
46
53
63
70
76
81
6505
5531
4788
4283
3885
3328
2832
2531
2328
2195
12222
10514
7000
8239
6876
6399
5505
4929
4540
4266
1.1
1.2
1.3
1.3
1.4
1.5
1.6
1.7
1.8
1.8
1.1
1.2
1.0
1.5
1.0
1.1
1.2
1.4
1.4
1.5
22.11
18.80
15.92
14.57
12.93
11.06
9.41
8.43
7.76
7.29
SK 42125 - R280 U/Z - 256 TC only available with footed housing
635 27 6.00
E14 www.nord.com
NOTES www.nord.com
E15
VARIABLE SPEED WORM GEARED MOTORS
U -DESIGN, FOOT MOUNTED OR FLANGE MOUNTED, DOUBLE REDUCTION
Type
SK 02040
- R 100 U - 56 C
- 143 TC
- 145 TC
Gear reducer dimensions Outline dimensions Motor dimensions
A
A1
AD
B
BA
B1
B2
D
DB
E
F
FA
FB
FC
F1
F2
G
G1
G2
H
J
J1
J2
J3
J4
J5
K
N
O
QA
4.33 3.41 3.94 3.54 1.10 3.15 0.39 0.79 0.79 2.48 6.65
4.72
3.94
2.16
3.94
3.15
0.02 2.48
1.57
0.90
3.15
0.39
0.39
0.35
1.06
0.79
0.94
0.79
1.69
5.36
C DB2
EC
18.58
0.30
5.98
HF
LE
RA
ZA
12.66
6.69
9.33
3.46
AB FP L
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
Shaft dimensions
U UY V
Key
0.750 0.83 1.57
3/16 x 3/16 x 1
Gear reducer dimensions Outline dimensions Motor dimensions
Type
AJ BB BF AD1 D B EF O2 SA C DB2 HF RA
AB
SK 02040 F
- R 100 U - 56 C
- 143 TC
- 145 TC
AK BD GA AH1 K1 QA1
3.94
0.12
0.26
4.53
0.02
2.24
5.63
3.23
3.150
Or
5.12
4.331
4.72
0.14
6.30
0.32
0.35
0.39
1.57
2.48
6.65
EC LE ZA
18.58
0.38
5.98
12.74
6.69
9.33
3.46
5.30
5.30
5.30
Shaft dimensions
FP L
7.20
7.20
7.20
9.30
10.30
11.30
U UY V
Key
0.750
0.83
1.57
3/16 x 3/16 x 1
Technical design may be subject to change. DXF files available upon request.
E16 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
U -DESIGN, SHAFT MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions
Type
SK 02040 A
- R 100 U - 56 C
- 143 TC
- 145 TC
AJ2 BD3 DB
BD2
2.95
BF2
2.91
EH
0.02
3.54
M6x10 2.36
K2
O2
2.48
5.63
Outline dimensions Motor dimensions
QA2 C D B2 HF RA
SA
6.65
EC
3.23
18.58 0.38
5.98
LE ZA
12.74
6.69
9.33
3.46
AB
5.30
5.30
5.30
FP L
7.20
7.20
7.20
9.30
10.30
11.30
ADH
Key
4.72
Shaft dimensions
DH UH UYH
1.38
0.750
3/16 x 3/16 x 1
0.84
www.nord.com
Technical design may be subject to change. DXF files available upon request.
E17
VARIABLE SPEED WORM GEARED MOTORS
U -DESIGN, FOOT MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
A B BE D E EB G H J1 K O C D B2 HF RA U UY V
QA
6.50
7.28
AB FP L
SK 02050
AD
4.80
4.68
BA
4.72
2.74
- R 100 U - 56 C
- 143 TC
- 145 TC
SK 12063 5.43
5.66
5.51
3.50
- R 150 U - 145 TC
B1
1.38
4.49
DB
3.94
0.30
F
3.94 1.38
3.15
1.38
5.51
4.41
0.51
4.33 1.77
3.94
G1
0.55
0.55
J
0.43
1.38
J2
1.38
1.34
N
2.95
2.28
0.63
0.63
0.43
1.58
1.58
1.42
3.15
2.95
7.40
7.87
19.52
EC
0.81
5.98
LE
13.17
6.69
ZA
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
Key
1.000 1.11 2.12
1/4 x 1/4 x 1-5/8
1.250 1.36 2.75
23.03 -0.04
8.19
16.57
8.74
10.43
4.17
5.30 7.20 11.30
1/4 x 1/4 x 2-1/4
1.375 1.51 2.75
SK 12080 6.30
6.30
7.01
3.74
1.58
6.69
5.51
0.75
5.12 2.36
5.12
0.79
0.79
0.55
1.58
1.58
1.58
3.94
2.99
8.98
9.49
- R 150 U - 145 TC
SK 32100 7.48
7.63
7.28
4.68
- R 196 U - 182 TC
- 184 TC
SK 42125 9.84
9.81
9.53
5.88
- R 280 U - 254 TC
- 256 TC
2.76
7.21
7.09
0.95
5.91 2.95
5.32
3.23
9.45
8.86
1.54
7.87 3.62
7.09
1.10
0.98
0.71
1.97
1.89
1.97
4.92
3.70
11.38
11.34
1.34
1.18
0.87
2.75
2.36
2.36
5.91
4.82
13.90
13.86
24.65
0.82
8.19
28.43
1.42
9.84
17.44
8.74
10.43
4.17
5.30 7.20 11.30
5/16x5/16 x2-1/8
1.875 2.09 3.50
21.02
10.16
12.60
5.04
5.90
5.90
8.50
8.50
12.30
14.00
35.28
0.23
14.09
27.99
13.58
16.50
7.01
9.70
9.70
13.30
13.30
18.20
20.00
1/2 x 1/2 x 2-3/4
2.375 2.65 4.50
5/8 x 5/8 x 3-1/2
E18
Technical design may be subject to change. DXF files available upon request.
www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
U -DESIGN, FLANGE MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 02050 F
SK 12080 F
- R 150 U - 145 TC
SK 32100 F
- R 196 U - 182 TC
- 184 TC
AK
5.12
4.331
BD
0.16
6.30
- R 100 U - 56 C
- 143 TC
- 145 TC
SK 12063 F 6.50
5.118
0.16
7.87
- R 150 U - 145 TC
AJ BB
6.50
5.118
0.16
7.87
8.47
7.087
0.16
9.84
BF
0.43
0.47
0.43
0.47
0.55
0.63
AJ1
4.53
3.740
6.50
5.118
8.47
7.087
BB1
GA
0.35
0.39
AK1
4.53
3.740
BD1
0.12
5.,20
0.12
5.51
0.16
7.56
0.16
9.37
BF1 AD1 DB K1 QA1 C D B2 HF RA U UY V
AB
21.10
10.16
12.60
5.04
5.90
5.90
FP L
M8x
13
AH1
5.47
2.12
EF
0.30
2.36
O
2.76
6.93
SA
7.09
3.94
28.31
EC
1.50
9.84
LE ZA
Key
1.000 1.11 2.12
19.33
0.81
5.98
13.17
6.69
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
1/4 x 1/4 x 1-5/8
1.250 1.36 2.75
M8x
13
M10x
16
M12x
20
6.53
2.75
7.24
2.75
9.09
3.50
0.51
2.64
0.75
2.95
2.95
7.84
3.98
9.88
0.95
3.62
4.80
12.24
7.72
4.76
9.53
5.75
22.88
0.31
8.19
16.93
8.74
10.43
4.17
5.30 7.20 11.30
1/4 x 1/4 x 2-1/4
1.375 1.51 2.75
11.22
7.17
24.69
1.06
8.19
17.68
8.74
10.43
4.17
5.30 7.20 11.30
5/16 x5/16 x2-1/8
1.875 2.09 3.50
8.50
8.50
12.30
14.00
1/2 x 1/2 x 2-3/4 www.nord.com
Technical design may be subject to change. DXF files available upon request.
E19
VARIABLE SPEED WORM GEARED MOTORS
U -DESIGN, SHAFT MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ2 BD2 EDD EH M QA2 C D B2 HF RA
AB FP L
SK 02050 A
AK2
4.53
3.740
BF2
5.20
M8x13
- R 100 U - 56 C
- 143 TC
- 145 TC
SK 12063 A 4.53
3.740
5.51
M8x13
- R 150 U - 145 TC
SK 12080 A
- R 150 U - 145 TC
SK 32100 A
- R 196 U - 182 TC
- 184 TC
K2
0.12 0.30 2.60
2.76
0.12 0.51 2.92
2.64
O
2.76
6.93
2.95
7.84
SA
7.09
3.94
7.72
4.76
EC
19.33
0.81
5.98
LE
13.17
6.69
ZA
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
22.88
0.31
8.19
16.93
8.74
10.43
4.17
5.30
7.20 11.30
6.50
5.118
7.56
M10x16
0.16 0.75 3.31
2.95
3.98
9.88
9.53
5.75
8.47
7.087
9.37
M12x20
0.16 0.95 3.98
3.62
4.80
12.24
11.22
7.17
24.69
1.06
8.19
17.68
8.74
10.43
4.17
5.30
7.20 11.30
28.31
1.50
9.84
21.10
10.16
12.60
5.04
5.90
5.90
8.50
8.50
12.30
14.00
ADH DH LH UH UYH
5.20 1.77 1.77 1.188
1/4 x 1/4 x 3-1/4
5.83 1.97 1.90 1.438
3/8 x 1/4 x 4
6.61 2.56 2.17 1.813
1/2 x 3/8 x 5-1/4
7.95 3.35 2.76 2.438
5/8 x 7/16 x 5-1/2
1.30
1.54
1.90
2.62
E20
Technical design may be subject to change. DXF files available upon request.
www.nord.com
NOTES www.nord.com
E21
VARIABLE SPEED WORM GEARED MOTORS
Z -DESIGN, FOOT MOUNTED OR FLANGE MOUNTED, DOUBLE REDUCTION
Type
SK 02040
- R 100 Z - 56 C
- 143 TC
- 145 TC
Gear reducer dimensions Outline dimensions Motor dimensions
A
A1
AD
B
BA
B1
B2
D
DB
E
F
FA
FB
FC
F1
F2
G
G1
G2
H
J
J1
J2
J3
J4
J5
K
N
O
QA
4.33 3.41 3.94 3.54 1.10 3.15 0.39 0.79 0.79 2.48 6.65
4.72
3.94
2.16
3.94
3.15
0.02 2.48
1.57
0.90
3.15
0.39
0.39
0.35
1.06
0.79
0.94
0.79
1.69
5.36
C
22.01
23.01
24.01
DB2
EC
0.30
5.98
HF
LE
12.66
6.69
RA
ZA
AB FP L
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
Shaft dimensions
U UY V
Key
0.750 0.83 1.57
3/16 x 3/16 x 1
Gear reducer dimensions Outline dimensions Motor dimensions
Type
AJ BB BF AD1 D B EF O2 SA C DB2 HF RA
AB
SK 02040 F
- R 100 Z - 56 C
- 143 TC
- 145 TC
AK BD GA AH1 K1 QA1
3.94
0.12
0.26
4.53
0.02
2.24
5.63
3.23
3.150
or
5.12
4.331
4.72
0.14
6.30
0.32
0.35
0.39
1.57
2.48
6.65
22.01
23.01
24.01
EC LE ZA
0.38
5.98
12.74
6.69
9.33
3.46
5.30
5.30
5.30
Shaft dimensions
U UY V
FP L
7.20
7.20
7.20
9.30
10.30
11.30
Key
0.750
0.83
1.57
3/16 x 3/16 x 1
Technical design may be subject to change. DXF files available upon request.
E22 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
Z -DESIGN, SHAFT MOUNTED, DOUBLE REDUCTION
Type
SK 02040 A
- R 100 U - 56 C
- 143 TC
- 145 TC
Gear reducer dimensions
AJ2 BD3 DB
BD2 BF2 EH
2.95
2.91
0.02
3.54
M6x10 2.36
K2
O2
2.48
5.63
Outline dimensions Motor dimensions
QA2 C D B2 HF RA
SA
6.65
3.23
22.01
23.01
24.01
EC LE
0.38
5.98
12.74
6.69
ZA
9.33
3.46
AB
5.30
5.30
5.30
FP L
7.20
7.20
7.20
9.30
10.30
11.30
ADH
Key
4.72
Shaft dimensions
DH UH UYH
1.38
0.750
3/16 x 3/16 x 1
0.84
www.nord.com
Technical design may be subject to change. DXF files available upon request.
E23
VARIABLE SPEED WORM GEARED MOTORS
Z -DESIGN, FOOT MOUNTED, DOUBLE REDUCTION
SK 02050
Type
- R 100 Z - 56 C
- 143 TC
- 145 TC
SK 12063
- R 100 Z - 56 C
- 143 TC
SK 12080
- 145 TC
- R 150 Z - 145 TC
- R 150 Z - 145 TC
SK 32100
- R 150 Z 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
SK 42125
- R 196 Z - 184 TC
- R 210 Z - 213 TC
- 215 TC
- R 250 Z - 254 TC
- R 280 Z - 254 TC
- 256 TC
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
A B BE D
AD
4.80
BA
4.72
B1
1.38
DB
3.94
4.68
2.74
4.49
0.30
5.43
5.51
1.38
4.41
5.66
3.50
5.51
0.51
6.30
7.01
1.58
5.51
6.30
3.74
6.69
0.75
7.48
7.28
2.76
7.09
7.63
4.68
7.21
0.95
9.84
9.53
3.23
8.86
9.81
5.88
9.45
1.54
E
EB
F
3.94
1.38
3.15
G
G1
0.55
H
J
0.43
0.55
1.38
J1 K
J2
1.38
N
2.95
1.34
2.28
O
QA
6.50
7.28
C D B2
EC
HF
LE
RA
ZA
AB FP L
U UY
Key
V
1.000 1.11 2.12
22.96
23.96
24.96
0.81
5.98
13.17
6.69
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
1/4 x 1/4 x 1-5/8
4.33
1.77
3.94
0.63
0.43
0.63
1.58
1.58
3.15
1.42
2.95
7.40
7.87
1.250 1.36 2.75
23.55
24.55
25.55
1.07
5.98
28.07 -0.04
8.19
13.43
6.69
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
16.57
8.74
10.43
4.17
5.30 7.20
11.30
1/4 x 1/4 x 2-1/4
5.12
2.36
5.12
0.79
0.55
0.79
1.58
1.58
3.94
1.58
2.99
8.98
9.49
1.375 1.51 2.75
29.69
0.82
8.19
17.44
8.74
10.43
4.17
5.30 7.20
11.30
5/16 x5/16 x2-1/8
1.875 2.09 3.50
5.91
2.95
5.32
1.10
0.71
0.98
1.97
1.89
4.92
11.38
1.97
3.70
11.34
7.87
3.62
7.09
1.34
0.87
1.18
2.75
2.36
5.91
13.90
2.36
4.82
13.86
31.30
2.20
8.19
33.17
34.87
1.42
9.84
36.94
38.04
1.02
10.63
18.82
8.74
21.02
10.16
21.57
10.31
10.43
4.17
12.60
5.04
13.23
5.51
5.30 7.20
11.30
1/2 x 1/2 x 2-3/4
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
2.375 2.65 4.50
37.78
2.60
9.84
39.85
40.95
2.20
10.63
43.32
1.22
12.44
43.99
45.79
0.23
14.09
22.20
10.16
12.60
5.04
5.90 8.50
14.00
5/8 x 5/8 x 3-1/2
22.76
10.31
25.79
12.36
27.99
13.58
13.23
5.51
15.59
6.34
16.50
7.01
7.40
7.40
9.70 13.30
18.20
9.70
9.70
10.30
10.30
13.30
13.30
15.60
16.70
18.20
20.00
Technical design may be subject to change. DXF files available upon request.
E24 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
Z -DESIGN, FLANGE MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AJ1 BB1 BF1 AD1 DB K1 QA1 C D B2 HF RA U UY V
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
SK 42125 F
BD
0.16
6.30
GA
0.35
0.39
AK1
4.53
3.740
BD1
0.12
5.20
0.43
0.47
4.53
3.740
0.12
5.51
AH1
5.47
2.12
EF
0.30
2.36
O
2.76
6.93
SA
7.09
3.94
22.77
23.77
24.77
0.81
5.98
AB FP L
SK 02050 F
AK
5.12
4.331
- R 100 Z - 56 C
- 143 TC
- 145 TC
SK 12063 F 6.50
5.118
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
SK 12080 F
- R 150 Z - 145 TC
SK 32100 F
- R 150 Z - 145 TC
- R 250 Z - 254 TC
- R 280 Z - 254 TC
- 256 TC
0.16
7.87
M8x
13
M8x
13
6.53
2.75
0.51
2.64
2.95
7.84
7.72
4.76
EC LE
13.17
6.69
ZA
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
Key
1.000 1.11 2.12
1/4 x 1/4 x 1-5/8
1.250 1.36 2.75
23.40
24.40
25.40
1.42
5.98
27.92 0.31
8.19
13.78
6.69
9.33
3.46
16.93
8.74
10.43
4.17
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
5.30 7.20
11.30
1/4 x 1/4 x 2-1/4
6.50
5.118
0.16
7.87
0.43
0.47
6.50
5.118
0.16
7.56
M10x
16
7.24
2.75
0.75
2.95
3.98
9.88
9.53
5.75
1.375 1.51 2.75
29.73 1.06
8.19
17.68
8.74
10.43
4.17
5.30 7.20
11.30
5/16 x5/16 x2-1/8
1.875 2.09 3.50
8.47
7.087
0.16
9.84
0.55
0.63
8.47
7.087
0.16
9.37
M12x
20
9.09
3.50
0.95
3.62
4.80
12.24
11.22
7.17
11.81
9.843
0.20
13.78
0.71
0.79
10.43
9.055
0.16
11.42
M12x
20
11.86
4.50
1.54
4.53
5.91
15.08
13.86
8.74
31.18 2.28
8.19
33.05
34.75
36.82
37.91
1.50
9.84
1.10
10.63
18.90
8.74
10.43
4.17
21.10
10.16
21.65
10.31
12.60
5.04
13.23
5.51
5.30 7.20
11.30
1/2 x 1/2 x 2-3/4
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
2.375 2.65 4.50
43.32 1.10
12.44
43.99
45.79
0.11
14.09
25.67
12.36
27.87
13.58
15.59
6.34
16.50
7.01
9.70 13.30 18.20
5/8 x 5/8 x 3-1/2
9.70
9.70
13.30
13.30
18.20
20.00
Technical design may be subject to change. DXF files available upon request.
www.nord.com
E25
VARIABLE SPEED WORM GEARED MOTORS
Z -DESIGN, SHAFT MOUNTED, DOUBLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ2 BD2 EDD EH M QA2 C D B2 HF RA
AB FP L
SK 02050 A
AK2
4.53
3.740
BF2
5.20
M8x13
- R 100 Z - 56 C
- 143 TC
- 145 TC
SK 12063 A 4.53
3.740
5.51
M8x13
- R 100 Z - 56 C
- 143 TC
- 145 TC
- R 150 Z - 145 TC
K2
0.12 0.30 2.60
2.76
0.12 0.51 2.92
2.64
O
2.76
6.93
2.95
7.84
SA
7.09
3.86
7.72
4.76
22.77
23.77
24.77
EC
0.81
5.98
LE
13.17
6.69
23.40
24.40
25.40
1.42
5.98
27.92
0.31
8.19
13.78
6.69
16.93
8.74
SK 12080 A 6.50
5.118
7.56
M10x16
0.16 0.75 3.31
2.95
3.98
9.88
9.53
5.75
- R 150 Z - 145 TC 29.73
1.06
8.19
17.68
8.74
SK 32100 A 8.47
7.087
9.37
M12x20
0.16 0.95 3.98
3.62
4.80
12.24
11.22
7.17
- R 150 Z - 145 TC
- R 196 Z - 182 TC
- 184 TC
- R 210 Z - 213 TC
- 215 TC
SK 42125 A 10.43
9.055
11.42
M12x20
0.16 1.54 4.92
4.53
- R 250 Z - 254 TC
5.91
15.08
13.86
8.74
- R 280 Z - 254 TC
- 256 TC
31.18
2.28
8.19
33.05
34.75
36.82
37.92
1.50
9.84
1.10
10.63
18.90
8.74
21.10
10.16
21.65
10.31
43.32
1.10
12.44
43.99
45.79
0.11
14.09
25.67
12.36
27.87
13.58
ZA
9.33
3.46
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
9.33
3.46
10.43
4.17
5.30
5.30
5.30
7.20
7.20
7.20
9.30
10.30
11.30
5.30 7.20
11.30
10.43
4.17
5.30 7.20
11.30
10.43
4.17
12.60
5.04
13.23
5.51
5.30 7.20
11.30
5.90
5.90
7.40
7.40
8.50
8.50
10.30
10.30
12.30
14.00
15.60
16.70
15.59
6.34
16.50
7.01
9.70 13.30 18.20
9.70
9.70
13.30
13.30
18.20
20.00
ADH DH LH UH UYH
Key
5.20
1.77 1.77 1.188
1.30
1/4 x 1/4 x 3-1/4
5.83
1.97 1.90 1.438
1.54
3/8 x 1/4 x 4
6.61
2.56 2.17 1.813
1.90
1/2 x 3/8 x 5-1/4
7.95
3.35 2.76 2.438
2.62
5/8 x 7/16 x 5-1/2
9.84
3.74 3.35 2.750
3.03
5/8 x 5/8 x 8
Technical design may be subject to change. DXF files available upon request.
E26 www.nord.com
NOTES www.nord.com
E27
NOTES
E28 www.nord.com
NOTES www.nord.com
E29
NOTES
E30 www.nord.com
FRICTION DRIVES www.nord.com
F1
EXPLANATORY NOTES
•
Perfomance Specifications
¼ to 7.5 HP
• Output torques to 48500 lb.in.
• 7:1 adjustable speed range.
Ease of Maintenance
Standard C - Face NEMA motor can be adapted to most electrical or environmental requirements. No lubrcation required. Only one component requires replacement.
Long Service Life
Gearcases are SAE 30 gray cast iron with internal reinforcements for strength and rigidity. This unique design eliminates the oil leakage, oil contamination and gear set misalignment problems common to drives with bolt-on output covers or flanges.
Features
1.
Motor mounting does not require drive disassembly - An exclusive Nord benefit
2.
Readily available from stock
3.
No installation adjustments
4.
Field adjustable speed stops
5.
Fast replacement of friction disc
Options
1.
Electric remote control
2.
Washdown service
3.
Dairy service with fixed tamper proof speed stops
4.
Electric remote control tachometer
5.
Flexible cable remote control
Application Matched
NorDISC adjustable speed drives are available with a wide variety of options including severe duty protection for washdown or outdoor duty, electric remote speed controls and indicators, a wide selection of motors, speed reducers and more.
F2 www.nord.com
EXPLANATORY NOTES
SELECTION PROCEDURES
General
When operating conditions dictate variable output speeds, the NORDISC
TM
Traction Drive will supply infinite speed variations over a fixed speed range. Sizes up to 7.5 HP are available with any NORDheavy duty Industrial Tough gearbox. Gearbox with In-Line, Shaft Mount, Bevel and Worm and are available with any of our easily customized options to solve your application problems. For customized gearbox options consult our Master Catalog.
NORDISC
TM
Traction Drives include motor, traction drive and gearbox packaged in a compact arrangement completely assembled and ready to go from the factory. We offer 4 case sizes with matching motor and gearbox capability. Advantages of NORDISC
TM
Drves include.
• Easy to install
• Output torque multiplication
• Speed reduction from motor rpm
• Infinitely adjustable speed range
• Adaptable to many environmental conditions
• Durable wear resistant discs
• Easy repair
• Affordable cost
NORDISC
TM
Traction Drive is an exellent mechanical adjustable speed device for a variety of applications. However it must be properly applied. A traction drive is not a constant torque or constant horsepower device. It is a combination of both. Altough the traction drive is a torque multiplier, there are limitations on the amount of torque it can transfer from the driving disc. An internal cam and spring mechanism automatically transmit only the required load torque minimizing wear on the friction disc.
How does it work ?
The motor runs at constant speed (nameplate rpm). Attached to the motor output shaft is the driving disc. The driven disc is angled by 2 degrees, localizing the friction contact on the disc pair. When the handwheel is rotated , the housing assembly moves up or down changing the driving disc operating pitch diameter. In turn the driven friction ring maintains contact with the driving disc. Torque then progresses through the gearbox for added speed reduction and torque multiplication. At maximum output rpm a speed increasing, torque decreasing adjustment is delivered. When minimum speed is set by the handwheel the output torque increases. Net result is a 7:1 speed turndown range with a 7:1 torque increase.
Efficiency
Drive efficiency is determind by the components in each drive package. Efficiency of the variable speed portion varies with speed and load.
When at full load efficiency is approximately 85 % at maximum speed. Speed reducer efficiency is 98.5 % for each reduction inside the gearbox. Worm reducers vary depending on the ratio. System efficiency is determind by multiplying the NORDISC
TM efficiency of 85 % by the efficiency of the speed reducer.
Output ratings for motor with traction drive (no gearbox)
Size
RV 10
RV 20
RV 30
RV 40 max. motor HP
0.75
1.50
3.00
7.50
max. adjustment ratio
7.0
7.0
7.0
5.0
max. TORQUE @ min RPM
(lb - in)
131
273
390
1415 min. TORQUE @ max RPM
(lb - in)
19
39
78
283
Adding a gearbox to motor + NORDISC
TM further reduces the speed (divide by the ratio) and multiplies torque (multiply by the ratio).
Speed Adjustment
This adjustment should only be performed when the motor is rotating or damage to the traction drive parts may occur.
Motor current draw
Selection pages show 460 Volt values. For 230 Volt motors multiply by 2. For 575 Volt multiply by 0.8.
Note that these are approximate current draw values.
For exact information, see motor nameplate.
www.nord.com
F3
F4
EXPLANATORY NOTES
SPEEDCONTROLS
Speed Adjustment
The speed is adjusted by rotating the plastic handle. This adjustment should only be performed when the motor is rotating or damage to internal parts may occur. Speed range is preset by the factory. Any speed adjustment within the range is acceptable.
Traction contact points
HIGH SPEED LOW SPEED
Friction disc
Driving disc
Motor shaft
Driving
Friction disc
Driving disc
R1
Motor shaft
R2
Driven
Outp ut
R2
R1
R2
Traction contact
Driven Output shaft
R2
R1
R1
Driving
Traction contact
In the two positions illustrated above, the traction contact points (pitch diameters) change. Torque is multiplied by the ratio of the respective pitch diameters of the driving and driven disc. It is also advantageous to use a gear reducer after the traction drive. The gear reducer acts as a torque multiplier and unloads the friction discs allowing the gear reducer to do the work.
Torque at the gearbox output shaft
Torque from the motor is multiplied by the traction drive. Then torque is multiplied by the gearbox ratio. This is the torque available to perform the task required of the application.
Constant torque applications
Many applications such as conveyor, positive displacement pumps and lifts have load torque that does not change over the adjusted speed range. The load torque is constant despite the speed changes. In these applications sizing of the belt drive is usually performed by matching the load torque to the maximum speed n
21 and torque capability T a1
.
Repair
The traction drive unit has components designed to wear out over time. The NORDISC simple construction allows quick and easy replacement of the motor and friction surfaces. To insure the same performance, the replacement motor must be the same power, design and style as the original.
www.nord.com
www.nord.com
Torque Compensator
EXPLANATORY NOTES
SPEEDINDICATORS
Speed Control Handwheel
Friction Disc
Driving Disc
Nema C - face Motor
Split cast iron housing
Brass nut
Adjustment stops
Stainless Steel Screw
Stainless Steel Gibs
F5
EXPLANATORY NOTES
FLEX C-INPUT ADAPTER
Flex C - Input Adapter
Available to allow motor replacement without disassembly of Traction Drive.
F6
Traction
Size
RV 10
RV 20
RV 20
RV 30
RV 40
Flex C
Adapter
C56C
Motor
Size
56C
C56C 56C
140TC 143TC
140TC 145TC
180TC 184TC
Motor
HP
0.25, 0.33,
0.50, 0.75
1
1.5
2.3
5
AJ1
5.88
5.88
5.88
5.88
7.25
AK1
4.500
4.500
4.500
4.500
8.500
BB1
0.20
0.20
0.20
0.20
0.25
BD1
6.50
6.50
6.50
6.50
9.00
BF1
0.43
0.43
0.43
0.43
0.56
CC
3.28
3.73
3.73
3.74
5.14
U1
0.625
0.625
0.875
0.875
1.125
UY1
0.71
0.71
0.96
0.96
1.24
Y1
0.188
0.188
0.188
0.188
0.250
Z
2.7
3
3
3.5
4.2
Nomenclature
SK 42 - RV 30 - 140 TC - 145 TC
C - face motor / 3 HP
Flex C - Input Adapter www.nord.com
VARIABLE SPEED HELICAL GEAR UNITS www.nord.com
G1
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
GEAR TYPE VARIABLE SPEED TYPE
FOOT MOUNTED
SK 02 - SK 62 =
SK 03 - SK 63 =
Helical Gearboxes double reduction, foot mounted
Helical Gearboxes triple reduction, foot mounted
RV 10
RV 20
RV 30
RV 40
Friction Drive Units
FLANGE MOUNTED
SK 02 F - SK 62 F =
SK 03 F - SK 63 F =
Helical Gearboxes double reduction, flange mounted
Helical Gearboxes triple reduction, flange mounted
RV 10 B
RV 20 B
RV 30 B
RV 40 B
Friction Drive Units, Corrosin resistant execution
HELICAL GEAR UNITS - OPTIONS see catalog 1000
FOOT MOUNTED
Variable speed helical geared motor with friction drive variable speed
G2
FLANGE MOUNTED
Variable speed helical geared motor with friction drive variable speed www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
SPEED CONTROLS
EMFST= Electromechanical remote control
MOTOR
C - face 0.25 - 7.50 HP
56 C - 213 TC
SPEEDINDICATORS
FAA= EMFST with remote speed indicator, analog
FAD = EMFST with remote speed indicator, digital
Washdown Duty
Energy Efficient
Single Phase
Stainless Steel
MOTOR OPTIONS
115 / 230 V
230 / 460 V
575 V
50 or 60 Hz
EXAMPLE FOR ORDERING:
SK 42 - RV 30 - 145 TC
C - face motor / three phase 1.50 HP
Variable speed type
Helical Gear Motor, double reduction www.nord.com
G3
VARIABLE SPEED HELICAL GEARED MOTORS
MOUNTING POSITIONS
SK 11 E - SK 51 E
Horizontal position
SK 02 - SK 52
SK 03 - SK 53
SK 63
B 3
B 6
B 7
B 8
B 5
B 5 I
G4
Symbols : Vent plug
Drain plug Oil level Mounting surface www.nord.com
V 1
V 3
V 5
V 6
VARIABLE SPEED HELICAL GEAR UNITS
MOUNTING POSITIONS
SK 11 E - SK 51 E
Vertical position
SK 02 - SK 52
SK 13 - SK 53
SK 63
POSITION OF TERMINAL BOX AND
CABLE ENTRY
Please specify position of terminal box and cable entry.
Normal design:
Terminal box at 3, cable entry at I or III only.
If other positions required, please specify exactly when ordering.
2
1
3
4
IV
III
I
II
In all mounting positions the variable speed drive may be mounted at an angle of 90 o or
180 o
.
(affix: ./1 = right,
./2 = left,
./3 = below)
B 5
B 5/2 B 5/1
Mounting surface
B 5/3
Symbols : Vent plug
Drain plug Oil level www.nord.com
G5
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.25
70
75
84
103
116
131
163
41
46
51
57
62
11.2
13.7
17
20
26
32
106
137
171
194
220
236
267
281
318
359
393
454
41
53
65
74
80
90
95
6.8
8.3
10.0
12.2
14.4
18
22
25
28
34
3.3
3.7
4.2
5.2
6.5
8.8
10.6
13.1
16
20
25
10.0
10.7
12.0
14.7
17
19
23
5.8
6.5
7.2
8.1
8.9
1.6
2.0
2.4
2.9
3.7
4.6
45
51
56
65
31
34
38
40
15.0
20
24
28
5.8
7.5
9.3
10.5
11.3
12.8
13.5
1.0
1.2
1.4
1.7
2.1
2.5
3.1
3.5
4.0
4.8
0.5
0.5
0.6
0.7
0.9
1.3
1.5
1.9
2.3
2.8
3.5
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
7.3
5.9
7.3
9.7
11.0
12.1
15.2
3.8
4.3
5.2
5.9
5.9
1.2
1.5
1.6
1.9
2.4
3.3
8.9
9.7
10.7
11.2
5.0
6.3
7.6
8.3
12.2
11.8
14.2
16.3
2.0
3.1
4.0
4.3
4.4
5.1
4.7
1.2
1.5
2.0
2.4
2.7
3.2
3.9
4.5
5.1
6.7
1.2
1.2
1.5
1.8
2.5
3.1
3.8
4.7
6.3
6.8
8.0
1248
1018
844
693
544
435
199
186
165
135
119
106
85.0
343
305
274
244
224
131
102
81.4
71.7
63.7
59.3
52.2
49.6
342
265
213
189
175
156
148
44.3
38.9
35.4
31.0
2062
1673
1389
1142
965
791
641
564
497
413
4221
3726
3336
2682
2159
1584
1319
1062
854
715
562
Ratio Type i ges
195.78
159.36
132.45
108.72
85.47
68.40
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
53.68
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
323.70
262.24
217.73
179.50
151.44
124.17
100.60
88.45
78.05
64.80
662.81
585.41
524.08
421.32
339.15
248.17
207.10
166.49
134.02
112.18
88.18
SK 33 - RV 10 - 56C
SK 23 - RV 10 - 56C
SK 13 - RV 10 - 56C
SK 12 - RV 10 - 56C
SK 02 - RV 10 - 56C 0.7
1:7
66
(460V)
I
N
[A]
I regel
[LBS]
0.7
1:7
135
0.7
1:7
108
0.7
1:7
71
0.7
1:7
82
G6 www.nord.com
2.0
2.4
2.9
3.7
4.6
1.2
1.4
1.7
2.1
2.5
3.1
3.5
4.0
4.8
0.6
0.7
0.9
1.3
1.5
1.9
2.3
2.8
3.5
23
29
32
36
12.0
14.7
17
19
40
5.8
6.5
7.2
8.1
8.9
10.0
10.7
0.33
8.3
10.0
12.2
14.4
18
22
25
28
34
13.7
17
20
26
32
4.2
5.2
6.5
8.8
10.6
13.1
16
20
25
84
103
116
131
163
204
227
256
279
41
46
51
57
62
70
75
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.25
518
562
647
742
240
270
608
688
773
943
1073
1209
1421
1621
2188
74
80
92
106
34
39
87
98
110
134
153
172
203
231
312
VARIABLE SPEED HELICAL GEARED MOTORS
2248
1867
1540
1301
1062
864
759
670
557
1372
1133
929
734
587
4496
3620
2912
2133
1779
1425
1151
965
757
222
182
161
143
115
92.0
83.2
73.5
67.3
462
411
370
329
301
268
250
26.6
24.8
21.2
18.6
58.4
51.3
23.0
20.4
17.7
15.0
13.3
11.5
9.7
8.9
6.4
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
16.3
18.8
19.9
20.8
3.5
5.2
16.2
17.4
20.2
20.8
21.6
22.9
23.9
23.8
No
Gearbox
1.1
1.2
1.4
1.8
2.5
1.1
1.5
1.8
2.0
2.4
2.9
3.3
3.8
4.9
1.1
1.4
1.8
2.3
2.8
3.5
4.7
5.0
5.9
11.2
12.6
14.0
14.7
5.5
7.2
8.1
9.0
16.4
2.8
3.2
3.9
4.4
4.4
5.4
4.4
Ratio Type i ges
4.22
3.89
3.38
2.95
9.11
8.10
3.60
3.18
2.83
2.32
2.04
1.81
1.54
1.35
SK 02 - RV 10 - 56C
SK 11E - RV 10 - 56C
SK - RV 10 F - 56C
0.7
1:7
62
(460V)
I
N
[A]
I regel
[LBS]
0.7
1:7
66
0.7
1:7
49
0.7
1:7
137
262.24
217.73
179.50
151.44
124.17
100.60
88.45
78.05
64.80
159.36
132.45
108.72
85.47
68.40
524.08
421.32
339.15
248.17
207.10
166.49
134.02
112.18
88.18
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
10.70
9.65
8.56
7.85
SK 33 - RV 10 - 56C
SK 23 - RV 10 - 56C
SK 13 - RV 10 - 56C
SK 12 - RV 10 - 56C
0.8
1:7
110
0.8
1:7
73
0.8
1:7
84 www.nord.com
G7
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.33
240
270
608
688
773
943
1073
1209
1421
1621
2188
106
137
171
194
220
236
267
281
41
53
65
74
80
90
95
318
359
393
454
518
562
647
742
34
39
87
98
110
134
153
172
203
231
312
31
34
38
40
15.0
20
24
28
5.8
7.5
9.3
10.5
11.3
12.8
13.5
74
80
92
106
45
51
56
65
0.50
12.2
14.4
18
22
25
28
34
6.5
8.8
10.6
13.1
16
20
25
26
32
1.7
2.1
2.5
3.1
3.5
4.0
4.8
0.9
1.3
1.5
1.9
2.3
2.8
3.5
3.7
4.6
VARIABLE SPEED HELICAL GEARED MOTORS
2336
1974
1620
1310
1151
1018
843
4416
3230
2690
2168
1743
1460
1151
1115
894
77.9
69.9
31.0
27.4
23.9
20.4
17.7
15.9
13.3
11.5
8.6
177
137
110
96.5
85.8
79.7
69.9
67.3
461
357
287
254
236
210
198
59.3
52.2
47.8
41.6
36.3
33.6
29.2
25.7
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
2.6
3.8
12.0
12.9
14.9
15.4
16.2
16.5
17.5
18.3
No
Gearbox
6.6
7.2
8.0
8.3
3.7
4.6
5.6
6.1
1.5
2.3
3.0
3.2
3.3
3.8
3.5
9.1
8.8
10.6
12.1
12.0
13.8
14.5
15.1
1.2
1.3
1.6
1.9
2.2
2.5
3.3
1.2
1.5
1.8
2.3
3.1
3.3
3.9
1.2
1.6
Ratio Type i ges
53.68
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
9.11
8.10
3.60
3.18
2.83
2.32
2.04
1.81
1.54
1.35
SK 02 - RV 10 - 56C
SK 11E - RV 10 - 56C
SK - RV 10 F - 56C
0.8
1:7
64
0.8
1:7
68
(460V)
I
N
[A]
I regel
[LBS]
0.8
1:7
51
1.1
1:7
137
339.15
248.17
207.10
166.49
134.02
112.18
88.18
179.50
151.44
124.17
100.60
88.45
78.05
64.80
85.47
68.40
SK 33 - RV 10 - 56C
SK 23 - RV 10 - 56C
SK 13 - RV 10 - 56C
1.1
1:7
110
1.1
1:7
G8 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.50
90
95
106
137
171
194
220
236
41
53
65
74
80
267
281
318
359
393
454
518
562
647
742
84
103
116
131
163
204
227
256
279
41
46
51
57
62
70
75
943
1073
1209
1421
1621
240
270
608
688
773
2188
5.8
7.5
9.3
10.5
11.3
24
28
31
34
12.8
13.5
15.0
20
56
65
74
80
38
40
45
51
92
106
23
29
32
36
12.0
14.7
17
19
40
5.8
6.5
7.2
8.1
8.9
10.0
10.7
134
153
172
203
231
34
39
87
98
110
312
0.75
3.0
3.6
4.0
4.4
5.6
0.4
0.5
0.6
0.6
0.8
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
3.7
4.0
4.4
4.8
2.5
2.3
2.4
3.1
1.0
1.5
2.0
2.1
2.1
7.0
8.0
7.9
9.2
5.2
5.5
6.0
5.8
9.6
10.2
7.4
8.3
9.3
9.7
3.6
4.7
5.4
5.9
10.8
1.9
2.1
2.6
2.9
2.9
3.6
2.9
10.4
10.8
11.0
11.4
11.9
1.7
2.5
7.9
8.5
9.6
No
Gearbox
318
301
268
207
166
147
129
120
681
541
435
385
358
106
102
89.4
79.7
72.6
62.8
54.9
50.4
44.3
38.1
337
277
244
218
174
139
126
112
102
700
623
560
498
457
405
380
119
105
46.9
41.6
37.2
30.1
26.6
23.9
20.4
17.7
13.0
14116
11877
10735
9753
7673
1.0
1.2
1.4
1.5
2.1
Ratio Type i ges
53.68
41.58
33.42
29.61
27.52
24.39
23.13
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
53.84
47.87
43.09
38.31
35.07
31.19
29.15
25.92
21.28
18.79
16.73
13.39
10.70
9.65
8.56
7.85
9.11
8.10
3.60
3.18
2.83
2.32
2.04
1.81
1.54
1.35
SK 12 - RV 10 - 56C
SK 02 - RV 10 - 56C
SK 11E - RV 10 - 56C
SK - RV 10 F - 56C
1.1
1:7
64
1.1
1:7
68
1.1
1:7
73
(460V)
I
N
[A]
I regel
[LBS]
728.20
607.30
548.89
498.82
392.20
SK 53 - RV 20 - 56C
1.1
1:7
51
1.6
1:7
291 www.nord.com
G9
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
70
82
95
106
47
56
59
66
27
30
34
38
117
135
146
150
187
22
25
28
34
10.6
13.1
16
20
25
31
38
45
53
17
20
23
27
10.7
12.0
12.9
15.0
6.1
7.3
7.9
8.3
9.5
10.0
21
23
27
33
37
5.8
7.4
8.9
9.3
11.8
12.3
16
17
19
21
21
27
10.0
11.7
13.5
15.0
6.7
8.0
8.4
9.4
3.8
4.3
4.9
5.4
3.1
3.5
4.0
4.8
1.5
1.9
2.3
2.8
3.5
2.4
2.9
3.3
3.9
1.5
1.7
1.8
2.2
4.4
5.4
6.4
7.6
0.9
1.0
1.1
1.2
1.3
1.4
2.9
3.3
3.9
4.8
5.3
0.8
1.1
1.3
1.3
1.7
1.8
2.2
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
7.4
7.4
7.2
7.2
5.5
5.2
7.1
5.2
2.8
3.5
3.6
4.4
7.4
7.9
7.4
7.9
7.9
1.3
1.5
1.7
2.2
1.2
1.5
2.1
2.2
2.6
3.5
4.3
4.8
5.7
2.2
2.5
2.8
3.4
6.5
7.0
7.0
7.0
1.3
1.6
1.6
1.7
2.0
2.2
7.2
7.4
7.4
7.2
7.4
2.0
3.0
3.2
3.2
4.1
4.3
6.4
4053
3257
2620
2195
1726
1593
1425
1257
1124
903
758
728
646
610
519
452
404
366
318
294
285
229
1965
1726
1522
1266
7036
5841
5452
5160
4522
4292
4000
3575
3319
2770
2531
2106
1859
1566
1372
1142
947
802
7319
5753
4806
4620
3629
3469
2726
2071
1867
1558
1274
1151
Ratio Type i ges
207.10
166.49
134.02
112.18
88.18
81.27
72.76
64.26
57.53
46.25
38.76
37.23
33.05
31.16
26.57
23.12
20.70
18.67
16.25
15.03
14.55
11.71
100.60
88.45
78.05
64.80
359.59
298.80
278.51
263.93
231.43
219.32
204.42
182.76
169.86
141.55
129.38
107.51
94.96
79.96
70.12
58.27
48.56
40.98
374.25
294.26
245.56
236.21
185.72
177.22
139.34
105.87
95.49
79.69
65.35
58.94
SK 53 - RV 20 - 56C
SK 43 - RV 20 - 56C
SK 33 - RV 10 - 56C
SK 32 - RV 20 - 56C
SK 23 - RV 10 - 56C
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
291
1.6
1:7
218
1.6
1:7
119
1.6
1:7
146
1.6
1:7
152
G10 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
270
608
688
773
943
1073
116
131
163
204
227
256
279
46
57
70
84
103
301
335
378
444
487
506
550
645
739
109
131
149
179
201
258
40
48
51
62
76
88
92
220
236
267
281
318
359
393
454
74
90
106
137
171
194
518
562
647
742
39
87
98
110
134
153
17
19
23
29
32
36
40
6.5
8.1
10.0
12.0
14.7
69
72
78
92
43
48
54
63
105
16
19
21
26
29
37
5.6
6.8
7.3
8.8
10.8
12.6
13.1
74
80
92
106
45
51
56
65
31
34
38
40
10.5
12.8
15.0
20
24
28
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
3.6
3.9
4.9
5.6
6.2
6.5
7.2
1.4
1.9
2.4
2.4
3.1
7.2
8.0
7.4
7.7
7.2
7.2
7.4
7.7
8.0
6.4
6.7
7.0
7.0
7.2
7.0
2.3
2.9
3.0
4.0
4.9
4.5
5.8
4.0
3.9
4.6
5.3
2.9
3.2
3.5
3.7
5.3
6.1
6.4
6.7
1.4
1.7
1.6
2.0
2.5
2.7
1.7
5.2
5.7
6.4
6.9
7.2
367
327
262
209
189
167
153
938
750
610
507
416
142
127
113
96.5
87.6
84.1
77.9
66.4
57.5
1080
894
837
696
563
484
465
392
327
288
239
213
165
195
181
160
152
135
119
109
94.7
579
477
403
312
250
220
82.3
76.1
66.4
57.5
158
70.8
62.0
55.8
45.1
39.8
Ratio Type i ges
47.87
38.31
31.19
25.92
21.28
18.79
16.73
13.39
10.70
9.65
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
3.98
3.39
2.96
55.28
45.90
42.82
35.55
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
29.61
24.39
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
8.10
3.60
3.18
2.83
2.32
2.04
SK 22 - RV 20 - 56C
SK 12 - RV 10 - 56C
SK 02 - RV 10 - 56C
SK 11E - RV 10 - 56C 1.6
1:7
73
1.6
1:7
77
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
128
1.6
1:7
82 www.nord.com
G11
3.3
3.9
4.4
5.4
1.8
2.2
2.4
2.9
6.4
7.6
1.0
1.1
1.2
1.3
1.4
1.5
1.7
1.9
2.3
2.8
3.5
3.3
3.9
4.8
5.3
1.7
1.8
2.2
2.9
0.6
0.8
0.8
1.1
1.3
1.3
9.4
10.0
11.7
13.5
15.0
17
19
19
3.8
4.3
4.9
5.4
6.7
8.0
8.4
1.00
23
27
31
38
12.9
15.0
17
20
45
53
7.3
7.9
8.3
9.5
10.0
10.7
12.0
23
27
33
37
11.8
12.3
16
21
4.4
5.6
5.8
7.4
8.9
9.3
13.1
16
20
25
106
117
131
135
66
70
82
95
27
30
34
38
47
56
59
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
1209
1421
1621
2188
172
203
231
312
VARIABLE SPEED HELICAL GEARED MOTORS
4434
3699
3381
2805
2478
2089
1832
1522
1266
1071
7797
7275
6894
6045
5726
5337
4770
13027
10239
9770
7682
6407
6168
4850
4629
3637
2761
2496
2080
1708
1540
4345
3496
2929
2301
863
813
694
604
541
488
435
424
2124
1903
1682
1505
1204
1009
974
3.6
4.3
4.9
5.2
2.1
2.5
2.6
3.2
5.2
5.2
1.2
1.2
1.3
1.5
1.6
1.7
1.9
1.1
1.5
1.7
2.0
5.6
5.6
5.4
5.6
3.0
3.2
4.8
5.4
1.1
1.6
1.5
2.3
2.4
2.4
5.4
5.6
5.4
6.0
3.9
5.6
5.6
5.4
2.1
2.6
2.7
3.3
4.1
3.9
5.3
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
35.4
30.1
26.6
19.6
f
BI
No
Gearbox
7.4
7.7
7.9
Ratio Type i ges
1.81
1.54
1.35
SK 11E - RV 10 - 56C
SK - RV 10 F - 56C
1.6
1:7
73
1.6
1:7
60
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
291
298.80
278.51
263.93
231.43
219.32
204.42
182.76
169.86
141.55
129.38
107.51
94.96
79.96
70.12
58.27
48.56
40.98
498.82
392.20
374.25
294.26
245.56
236.21
185.72
177.22
139.34
105.87
95.49
79.69
65.35
58.94
166.49
134.02
112.18
88.18
81.27
72.76
64.26
57.53
46.25
38.76
37.23
33.05
31.16
26.57
23.12
20.70
18.67
16.66
16.25
SK 53 - RV 20 - 56C
SK 43 - RV 20 - 56C
SK 33 - RV 20 - 56C
SK 32 - RV 20 - 56C
2.1
1:7
218
2.1
1:7
172
2.1
1:7
152
G12 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
146
150
187
25
28
34
109
131
149
179
201
258
40
48
51
62
76
88
92
204
227
256
279
301
335
378
444
103
116
131
163
46
57
70
84
487
506
550
645
739
220
236
267
281
318
359
393
454
74
90
106
137
171
194
518
562
647
742
21
21
27
3.5
4.0
4.8
16
19
21
26
29
37
5.6
6.8
7.3
8.8
10.8
12.6
13.1
69
72
78
92
105
43
48
54
63
29
32
36
40
6.5
8.1
10.0
12.0
14.7
17
19
23
74
80
92
106
45
51
56
65
31
34
38
40
10.5
12.8
15.0
20
24
28
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
5.6
6.0
6.0
1.1
1.2
1.6
4.8
5.0
5.2
5.2
5.4
5.2
1.7
2.2
2.3
3.0
3.7
3.4
4.3
5.4
5.4
5.6
5.8
4.1
4.6
4.8
5.4
2.4
2.7
2.9
3.7
1.0
1.5
1.8
1.8
5.4
6.0
5.6
5.8
6.0
3.0
2.9
3.5
4.0
2.2
2.4
2.6
2.7
4.0
4.6
4.8
5.0
1.1
1.2
1.2
1.5
1.9
2.0
392
380
305
2310
2036
1690
1443
1195
1115
929
752
646
620
523
437
383
319
284
221
280
252
224
205
190
171
151
128
1248
1000
814
677
556
490
437
350
117
112
104
88.5
77.0
260
242
214
204
180
159
145
126
773
637
537
417
335
294
110
102
88.5
77.0
Ratio Type i ges
15.03
14.55
11.71
88.45
78.05
64.80
55.28
45.90
42.82
35.55
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
10.70
9.65
8.56
7.85
7.28
6.53
5.79
4.93
47.87
38.31
31.19
25.92
21.28
18.79
16.73
13.39
4.49
4.32
3.98
3.39
2.96
29.61
24.39
20.59
15.95
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
SK 32 - RV 20 - 56C
SK 23 - RV 20 - 56C
SK 22 - RV 20 - 56C
SK 12 - RV 20 - 56C
SK 02 - RV 20 - 56C
2.1
1:7
152
2.1
1:7
146
2.1
1:7
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
104
2.1
1:7
108 www.nord.com
G13
3.9
4.4
5.4
6.4
7.6
2.2
2.4
2.9
3.3
1.4
1.5
1.7
1.8
2.8
3.5
1.8
2.2
2.9
3.3
1.1
1.3
1.3
1.7
3.9
4.8
5.3
19
21
21
27
8.0
8.4
9.4
10.0
11.7
13.5
15.0
17
3.8
4.3
4.9
5.4
6.7
1.50
27
31
38
45
53
10.0
10.7
12.0
12.9
15.0
17
20
23
20
25
7.4
8.9
9.3
11.8
12.3
16
21
23
27
33
37
82
95
106
117
56
59
66
70
135
146
150
187
27
30
34
38
47
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
270
608
688
773
943
1073
1209
1421
1621
2188
39
87
98
110
134
153
172
203
231
312
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
8576
8000
7151
6646
5540
5062
4204
3717
3124
2744
2283
1903
1602
4390
3452
11514
9602
9239
7266
6930
5452
4142
3735
3115
2558
2310
3177
2850
2513
2248
1805
1513
1460
1292
1221
1035
903
810
730
635
588
569
458
212
93.8
83.2
73.5
60.2
53.1
46.9
39.8
35.4
26.1
f
BI
No
Gearbox
1.3
4.0
4.3
4.9
5.2
5.4
5.6
5.8
5.9
2.9
3.3
3.5
3.5
3.5
1.7
1.8
2.2
2.4
1.1
1.1
1.3
1.4
1.1
1.3
2.1
3.2
3.6
3.7
1.5
1.6
1.6
2.0
3.7
3.6
3.7
3.7
3.6
3.6
3.7
2.6
3.6
2.6
3.7
4.0
3.7
4.0
4.0
1.4
1.7
1.8
2.2
2.7
Ratio Type i ges
8.10
3.60
3.18
2.83
2.32
2.04
1.81
1.54
1.35
SK 11E - RV 20 - 56C
SK - RV 20 F - 56C
219.32
204.42
182.76
169.86
141.55
129.38
107.51
94.96
79.96
70.12
58.27
48.56
40.98
112.18
88.18
294.26
245.56
236.21
185.72
177.22
139.34
105.87
95.49
79.69
65.35
58.94
SK 53 - RV 20 - 143TC
SK 43 - RV 20 - 143TC
SK 33 - RV 20 - 143TC
81.27
72.76
64.26
57.53
46.25
38.76
37.23
33.05
31.16
26.57
23.12
20.70
18.67
16.25
15.03
14.55
11.71
SK 32 - RV 20 - 143TC
3.0
1:7
223
3.0
1:7
176
3.0
1:7
2.1
1:7
86
3.0
1:7
295
2.1
1:7
99
(460V)
I
N
[A]
I regel
[LBS]
G14 www.nord.com
393
454
518
562
647
742
171
194
220
236
267
281
318
359
256
279
301
335
378
444
487
506
70
84
103
116
131
163
204
227
550
645
739
109
131
149
179
201
258
289
319
40
48
51
62
76
88
92
336
378
422
474
551
620
56
65
74
80
92
106
38
40
45
51
24
28
31
34
54
63
69
72
36
40
43
48
19
23
29
32
10.0
12.0
14.7
17
78
92
105
29
37
41
45
16
19
21
26
5.6
6.8
7.3
8.8
10.8
12.6
13.1
48
54
60
68
79
88
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.50
34 4.8
VARIABLE SPEED HELICAL GEARED MOTORS
218
189
165
152
132
115
502
441
389
363
320
305
270
239
335
307
285
256
227
193
175
169
1221
1018
833
735
654
524
419
378
156
133
116
783
655
574
477
426
332
296
268
2159
1797
1673
1389
1124
965
929
255
227
203
181
155
138
2.3
2.7
2.6
3.1
3.2
3.4
1.7
1.8
2.0
1.9
1.2
1.3
1.5
1.6
3.7
3.9
3.6
4.0
3.2
3.6
3.6
3.6
2.0
2.5
2.8
3.1
1.2
1.2
1.6
1.8
3.7
3.9
4.0
3.6
3.5
3.6
3.9
3.2
3.3
3.5
3.5
1.2
1.4
1.5
2.0
2.4
2.3
2.9
3.8
3.9
3.5
3.6
3.8
3.9
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
2531 f
BI
1.1
Ratio i ges
Type
64.80
SK 23 - RV 20 - 143TC 3.0
1:7
150
3.0
1:7
(460V)
I
N
[A]
I regel
[LBS]
12.82
11.27
9.95
9.28
8.19
7.80
6.89
6.10
5.57
4.82
4.22
3.89
3.38
2.95
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
31.19
25.92
21.28
18.79
16.73
13.39
10.70
9.65
3.98
3.39
2.96
55.28
45.90
42.82
35.55
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
7.57
6.86
6.51
5.79
5.18
4.62
3.97
3.53
SK 22 - RV 20 - 143TC
SK 12 - RV 20 - 143TC
SK 02 - RV 20 - 143TC 3.0
1:7
108
3.0
1:7
112 www.nord.com
G15
5.2
5.8
6.4
8.1
8.7
9.7
1.8
2.2
2.9
3.3
1.1
1.3
1.3
1.7
3.9
4.8
1.8
2.2
2.4
2.9
3.3
3.9
4.4
5.4
6.1
7.6
8.9
10.2
10.7
12.6
12.8
14.3
18
21
1.7
2.1
2.9
3.6
4.0
5.0
5.8
6.2
2.00
37
41
45
57
61
68
7.4
8.9
9.3
11.8
12.3
16
21
23
27
33
12.9
15.0
17
20
23
27
31
38
75
89
90
100
43
53
62
72
124
145
12.1
15.0
20
25
28
35
41
43
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.50
608
688
773
943
1073
1209
1421
1621
2188
87
98
110
134
153
172
203
231
312
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
15364
12824
12337
9700
9257
7275
5531
4983
4160
3416
3106
2805
2558
2009
1885
1673
8868
7390
6753
5611
4956
4177
3664
3044
2664
2159
1841
1593
1531
1292
1274
1142
920
789
9425
7611
5637
4549
4044
3283
2814
2646
141
125
111
91.2
79.7
70.8
60.2
53.1
39.1
f
BI
No
Gearbox
2.6
2.8
3.2
3.4
3.6
3.7
3.9
4.0
4.4
5.0
5.5
7.3
6.1
7.4
1.6
2.4
3.2
3.5
1.1
1.2
1.2
1.5
3.6
4.2
1.1
1.3
1.3
1.6
1.8
2.1
2.4
3.1
5.9
6.1
6.0
6.1
2.8
3.7
4.9
4.7
7.3
7.3
3.4
4.3
5.7
6.1
7.3
8.0
8.5
8.0
Ratio i ges
Type
3.60
3.18
2.83
2.32
2.04
1.81
1.54
1.35
SK 11E - RV 20 - 143TC
SK - RV 20 F - 143TC
(460V)
I
N
[A]
I regel
[LBS]
3.0
1:7
104
3.0
1:7
90
180.57
145.71
107.89
87.06
77.46
62.87
53.82
50.73
294.26
245.56
236.21
185.72
177.22
139.34
105.87
95.49
79.69
65.35
59.54
53.81
48.90
38.45
36.03
32.09
169.86
141.55
129.38
107.51
94.96
79.96
70.12
58.27
50.98
41.29
35.25
30.46
29.29
24.67
24.41
21.87
17.71
15.12
SK 63 - RV 30 - 145TC
SK 53 - RV 30 - 145TC
SK 52 - RV 30 - 145TC
SK 43 - RV 30 - 145TC
SK 42 - RV 30 - 145TC 3.4
1:7
229
3.4
1:7
262
3.4
1:7
293
3.4
1:7
335
3.4
1:7
415
G16 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
152
178
215
257
301
353
409
478
562
146
150
187
223
262
277
310
325
384
398
494
583
66
70
82
95
106
117
135
34
38
47
56
59
149
179
201
258
289
319
336
378
51
62
76
88
92
109
131
422
474
551
620
784
131
163
204
227
60
68
79
88
112
41
45
48
54
21
26
29
37
7.3
8.8
10.8
12.6
13.1
16
19
19
23
29
32
37
39
44
46
21
21
27
32
55
57
70
83
9.4
10.0
11.7
13.5
15.0
17
19
4.9
5.4
6.7
8.0
8.4
22
25
31
37
43
50
58
68
80
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
4.2
4.6
4.4
4.5
3.3
4.0
4.2
4.0
1.1
1.5
1.8
1.7
2.2
2.4
2.9
4.0
4.2
4.4
4.6
4.8
1.5
1.8
2.1
2.3
4.8
5.0
4.4
5.0
4.4
4.8
4.8
4.8
5.2
4.8
5.0
5.2
1.9
2.8
2.8
3.8
4.2
4.4
4.8
1.4
1.7
2.1
1.9
2.7
8.0
8.0
8.0
8.0
8.5
8.9
8.0
8.5
8.9
767
637
569
443
396
358
340
303
2239
1859
1505
1292
1239
1044
874
271
242
207
184
146
873
699
558
504
785
759
612
512
436
412
368
352
297
288
231
196
3354
3000
2416
2027
1947
1726
1628
1389
1204
1080
974
849
750
642
533
444
381
323
280
239
204
Ratio i ges
Type
42.82
35.55
28.80
24.73
23.74
20.03
16.75
14.69
12.20
10.89
8.48
7.57
6.86
6.51
5.79
5.18
4.62
3.97
3.53
2.79
16.73
13.39
10.70
9.65
15.03
14.55
11.71
9.80
8.36
7.90
7.05
6.74
5.70
5.50
4.43
3.75
64.26
57.53
46.25
38.76
37.23
33.05
31.16
26.57
23.12
20.70
18.67
16.25
14.38
12.28
10.20
8.50
7.28
6.19
5.35
4.58
3.89
SK 42 - RV 30 - 145TC
SK 32 - RV 30 - 145TC
SK 22 - RV 30 - 145TC
SK 12 - RV 30 - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
229
3.4
1:7
172
3.4
1:7
196
3.4
1:7
152 www.nord.com
G17
3.00
50
61
71
83
100
105
126
28
35
41
43
12.1
15.0
20
25
67
68
83
91
101
37
41
45
57
61
21
23
27
33
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
256
279
301
335
378
444
487
506
550
645
739
277
342
596
708
807
904
1052
1183
1499
2188
39
49
85
101
115
129
150
169
214
312
72
78
92
105
36
40
43
48
54
63
69
9.6
9.7
11.8
13.0
14.4
5.2
5.8
6.4
8.1
8.7
2.9
3.3
3.9
4.8
7.2
8.6
10.1
11.9
14.2
15.0
18
4.0
5.0
5.8
6.2
1.7
2.1
2.9
3.6
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
8284
7469
6230
5115
4655
4213
3823
3009
2823
2549
2513
2071
1867
1699
14125
11399
8443
6815
6062
4921
4213
3965
3398
2823
2416
2053
1717
1628
1363
412
335
192
161
142
127
109
96.5
76.1
52.2
447
410
381
341
303
258
235
226
208
177
155 f
BI
4.1
4.9
5.2
5.2
5.6
2.9
3.4
3.7
4.9
4.1
2.1
2.3
2.4
2.8
5.7
5.3
5.7
6.0
6.0
5.9
5.9
4.9
5.3
5.7
5.3
2.3
2.9
3.8
4.1
No
Gearbox
1.3
1.7
3.1
3.4
4.0
4.2
4.4
4.6
4.8
2.4
2.8
2.7
3.2
3.5
3.9
4.1
4.1
4.3
4.5
4.6
Ratio i ges
Type
8.56
7.85
7.28
6.53
5.79
4.93
4.49
4.32
3.98
3.39
2.96
7.90
6.40
3.67
3.09
2.71
2.42
2.08
1.85
1.46
SK 12 - RV 30 - 145TC
SK 21E - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
152
3.4
1:7
157
3.4
1:7
130
180.57
145.71
107.89
87.06
77.46
62.87
53.82
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
SK 63 - RV 30 - 145TC
105.87
95.49
79.69
65.35
59.54
53.81
48.90
38.45
36.03
32.56
32.09
26.46
23.92
21.68
SK 53 - RV 30 - 145TC
SK 52 - RV 30 - 145TC
4.8
1:7
415
4.8
1:7
335
4.8
1:7
293
G18 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
3.00
112
123
156
163
179
207
248
284
301
341
391
475
536
38
45
53
89
100
124
152
178
215
257
301
353
409
478
562
43
53
62
75
131
135
146
150
187
223
262
277
47
59
70
82
95
106
117
310
325
384
398
494
583
76
92
109
41
43
49
56
68
76
16
18
22
23
26
29
35
5.4
6.4
7.6
50
58
68
80
6.1
7.6
8.9
10.7
25
31
37
43
12.6
14.3
18
22
27
32
37
39
19
19
21
21
6.7
8.4
10.0
11.7
13.5
15.0
17
44
46
55
57
70
83
10.8
13.1
16
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
6.7
6.8
6.7
6.2
6.8
6.7
5.6
5.6
5.6
6.2
6.8
6.2
6.2
2.1
2.4
2.7
5.3
5.3
5.3
5.7
4.1
4.1
4.9
5.3
5.9
5.3
5.7
5.9
1.9
2.5
3.2
3.9
3.2
3.2
3.2
3.4
2.8
3.2
2.9
3.2
1.4
1.8
1.9
1.9
2.5
2.8
2.9
2.9
3.4
3.5
3.2
3.4
3.5
1.2
1.4
1.6
1531
1389
1097
1053
956
827
691
603
569
503
438
361
319
4558
3797
3204
3991
3230
2761
2292
1929
1708
1389
1124
965
798
665
570
484
419
358
304
1301
1274
1177
1142
920
766
654
618
3620
2912
2434
2080
1805
1620
1460
551
527
446
430
347
294
2257
1859
1566
Ratio i ges
Type
19.60
17.81
14.00
13.45
12.20
10.58
8.83
7.70
7.27
6.42
5.60
4.61
4.08
58.27
48.56
40.98
50.98
41.29
35.25
29.29
24.67
21.87
17.71
14.38
12.28
10.20
8.50
7.28
6.19
5.35
4.58
3.89
46.25
37.23
31.16
26.57
23.12
20.70
18.67
16.66
16.25
15.03
14.55
11.71
9.80
8.36
7.90
7.05
6.74
5.70
5.50
4.43
3.75
28.80
23.74
20.03
SK 52 - RV 30 - 145TC
SK 43 - RV 30 - 145TC
SK 42 - RV 30 - 145TC
SK 32 - RV 30 - 145TC
SK 22 - RV 30 - 145TC
4.8
1:7
262
4.8
1:7
229
(460V)
I
N
[A]
I regel
[LBS]
4.8
1:7
293
4.8
1:7
196
4.8
1:7
172 www.nord.com
G19
5.00
61
71
83
100
35
41
43
50
105
126
12.1
15.0
17
20
25
28
21
23
27
33
76
83
91
101
112
123
156
37
41
45
54
57
60
68
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
3.00
149
179
201
258
289
336
378
422
474
551
620
784
267
596
661
848
1052
1243
2188
60
68
79
88
112
21
26
29
37
41
48
54
38
85
94
121
150
177
312
7.0
8.1
8.6
10.1
12.1
14.2
17
20
21
25
2.4
3.0
3.3
4.1
5.0
5.7
4.1
4.6
5.5
6.7
15.0
17
18
20
22
25
31
7.4
8.1
9.0
10.8
11.4
11.9
13.6
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
1151
956
852
664
592
509
453
405
361
311
276
219
642
287
259
202
163
138
78.2
23488
18957
17240
14036
11328
10080
8177
7000
6602
5646
4699
3.4
3416
2859
2699
2257
13771
12425
10363
8505
3752
3443
3133
2823
2549
2319
1823
7744
7000
6363
5248
5000
4770
4177 f
BI
No
2.7
2.8
2.9
3.0
3.2
2.2
2.7
2.8
2.7
2.8
2.9
3.0
1.4
2.8
2.9
3.2
3.4
3.5
3.2
3.4
3.2
3.4
3.2
30.91
3.6
3.6
3.6
3.6
1.4
1.7
1.9
2.4
2.5
2.9
1.3
1.4
1.4
1.7
4.5
3.1
4.6
3.4
3.4
3.4
3.4
1.8
2.0
2.2
2.8
3.0
2.9
3.0
Ratio i ges
Type
14.69
12.20
10.89
8.48
7.57
6.51
5.79
5.18
4.62
3.97
3.53
2.79
8.20
3.67
3.31
2.58
2.08
1.76
SK 22 - RV 30 - 145TC
SK 31E - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
4.8
1:7
172
4.8
1:7
168
4.8
1:7
130
105.87
95.49
79.69
65.35
59.54
53.81
48.90
40.37
38.45
36.69
32.09
28.85
26.46
24.07
21.68
19.60
17.81
14.00
180.57
145.71
132.54
106.95
87.06
77.46
62.87
53.82
50.73
43.43
36.11
26.28
21.98
20.77
17.37
SK 63 - RV 40 - 184TC
SK 53 - RV 40 - 184TC
SK 52 - RV 40 - 184TC
7.6
1:5
492
7.6
1:5
412
7.6
1:5
370
G20 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
5.00
163
179
207
248
284
301
341
391
475
536
117
135
146
150
187
223
262
277
59
70
82
95
106
310
325
384
398
494
583
152
178
215
257
301
353
409
478
562
85
89
102
122
43
53
62
75
319
336
378
422
474
551
620
784
149
179
201
258
289
62
65
77
80
90
117
37
45
52
55
23
27
29
30
11.8
14.1
16
19
21
30
36
43
52
60
71
82
96
113
17
18
20
24
8.6
10.6
12.4
15.0
95
110
124
157
64
67
76
85
30
36
40
52
58
33
36
41
50
57
60
68
78
95
107
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
2.6
2.6
2.6
2.9
2.0
2.1
2.3
2.6
1.1
1.1
1.1
1.5
1.8
2.3
2.9
3.1
2.6
2.9
3.1
3.2
3.2
3.2
3.2
3.4
3.6
3.2
3.4
3.6
2.7
2.5
3.3
3.7
1.1
1.5
1.9
2.4
2.2
2.4
2.5
2.8
2.5
2.4
2.5
2.1
1.3
1.7
1.9
2.1
2.2
3.7
4.1
3.7
3.7
4.0
4.1
4.0
3.7
4.1
4.0
4841
4053
3460
3009
2690
2425
2115
1956
1894
1522
1274
1089
1027
920
877
742
715
576
488
1867
1602
1328
1106
947
805
696
596
506
6629
5372
4584
3814
3363
3213
2797
2328
1912
1584
1416
1106
982
894
847
753
673
601
517
459
363
1752
1584
1381
1151
1000
947
835
728
600
531
Ratio i ges
Type
37.23
31.16
26.57
23.12
20.70
18.67
16.25
15.03
14.55
11.71
9.80
8.36
7.90
7.05
6.74
5.70
5.50
4.43
3.75
14.38
12.28
10.20
8.50
7.28
6.19
5.35
4.58
3.89
50.98
41.29
35.25
29.29
25.88
24.67
21.50
17.92
14.69
12.20
10.89
8.48
7.57
6.86
6.51
5.79
5.18
4.62
3.97
3.53
2.79
13.45
12.20
10.58
8.83
7.70
7.27
6.42
5.60
4.61
4.08
SK 52 - RV 40 - 184TC
SK 42 - RV 40 - 184TC
SK 32 - RV 40 - 184TC
SK 22 - RV 40 - 184TC
(460V)
I
N
[A]
I regel
[LBS]
7.6
1:5
370
7.6
1.5
249
7.6
1.5
273
7.6
1:5
306 www.nord.com
G21
15.0
17
18
20
22
25
31
7.4
8.1
9.0
10.8
11.4
11.9
13.6
57
60
68
78
33
36
41
50
95
107
12.4
15.0
17
18
20
24
30
36
17
20
21
25
8.6
10.1
12.1
14.2
3.0
3.3
4.1
5.0
5.7
7.0
8.1
7.50
76
83
91
101
112
123
156
37
41
45
54
57
60
68
163
179
207
248
284
301
341
391
475
536
62
75
85
89
102
122
152
178
83
100
105
126
43
50
61
71
15.0
17
20
25
28
35
41
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
5.00
267
596
661
848
1052
1243
2188
53
119
132
170
211
249
438
VARIABLE SPEED HELICAL GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
11647
10523
9567
7894
7523
7177
6275
5646
5177
4708
4239
3832
3487
2735
2628
2390
2071
1726
1505
1425
1257
1097
903
798
6894
5726
5062
4823
4204
3505
2814
2398
28497
25922
21098
17027
15151
12293
10523
9921
8496
7062
6045
5142
4301
4062
3398
929
477
431
335
271
229
130 f
BI
No
Gearbox
1.0
2.0
2.2
2.6
2.9
3.1
3.0
2.1
3.1
2.3
2.3
2.2
2.3
1.2
1.3
1.5
1.8
2.0
2.0
2.0
2.7
2.7
2.7
2.5
2.5
2.7
2.5
2.5
2.7
2.7
1.3
1.6
1.8
1.6
2.2
2.5
2.1
2.1
2.4
2.4
2.4
2.4
2.1
2.3
2.1
2.3
1.1
1.3
1.5
1.6
1.9
2.1
2.3
Ratio i ges
Type
8.20
3.67
3.31
2.58
2.08
1.76
SK 31E - RV 40 - 184TC
SK - RV 40 F - 184TC
(460V)
I
N
[A]
I regel
[LBS]
7.6
1:5
245
7.6
1:5
207
59.54
53.81
48.90
40.37
38.45
36.69
32.09
28.85
26.46
24.07
21.68
19.60
17.81
14.00
13.45
12.20
10.58
8.83
7.70
7.27
6.42
5.60
4.61
4.08
35.25
29.29
25.88
24.67
21.50
17.92
14.38
12.28
145.71
132.54
107.89
87.06
77.46
62.87
53.82
50.73
43.43
36.11
30.91
26.28
21.98
20.77
17.37
SK 63 - RV 40 - 213TC
SK 52 - RV 40 - 213TC
SK 42 - RV 40 - 213TC 11
1:5
346
11
1:5
531
11
1:5
410
G22 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
7.50
215
257
301
353
409
478
562
596
661
848
1052
1243
378
422
474
551
620
784
179
201
258
289
319
336
262
277
310
325
384
398
494
583
106
117
135
146
150
187
223
2188
76
85
95
110
124
157
36
40
52
58
64
67
119
132
170
211
249
52
55
62
65
77
80
99
117
21
23
27
29
30
37
45
43
52
60
71
82
96
113
438
VARIABLE SPEED HELICAL GEARED MOTORS
2390
2133
1655
1478
1345
1274
1133
1009
903
776
690
546
1637
1549
1381
1319
1115
1080
866
734
4044
3655
3177
2938
2850
2292
1920
718
648
504
407
344
1991
1664
1425
1212
1044
894
761
196
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
No
Gearbox
1.7
1.4
1.5
1.6
1.7
1.9
1.2
1.3
1.4
1.5
1.7
1.6
1.4
1.4
1.7
1.9
2.1
1.7
1.9
1.5
1.9
2.1
1.7
1.9
2.1
1.2
1.4
1.4
1.5
1.7
1.7
1.7
2.1
2.1
2.3
2.4
2.1
2.3
2.4
Ratio i ges
Type
10.20
8.50
7.28
6.19
5.35
4.58
3.89
12.20
10.89
8.48
7.57
6.86
6.51
5.79
5.18
4.62
3.97
3.53
2.79
20.70
18.67
16.25
15.03
14.55
11.71
9.80
8.36
7.90
7.05
6.74
5.70
5.50
4.43
3.75
3.67
3.31
2.58
2.08
1.76
SK 42 - RV 40 - 213TC
SK 32 - RV 40 - 213TC
SK 22 - RV 40 - 213TC
SK 31E - RV 40 - 213TC
SK - RV 40 F - 213TC
(460V)
I
N
[A]
I regel
[LBS]
11
1:5
346
11
1:5
289
11
1:5
313
11
1:5
284
11
1:5
247 www.nord.com
G23
NOTES
G24 www.nord.com
VARIABLE SPEED MOTORS
FRICTION DRIVE UNITS
Type Fitting flange
SA2 N
Outline dimensions Motor Shaft dimensions
(mm)
Z2 * KB Z1 Z Z3 Z4 HF1 H EC Rmax AB BDM FP L U UY V
SK RV10 - 56 C
160 S 3.62 1.22 17.17 -1.38 3.23 15.95 2.64 10.08 9.21 3.15
4.72 1.38 5.30
4.13 7.20 9.30
14 16.0
30
SK RV20 - 56 C
- 143 TC
- 56 C
- 143 TC
160 S
250 S
SK RV30 - 145 TC
- 145 TC
- 145 TC
160 S
250 S
300 S
4.57 1.42 19.19
20.18
-0.89
-0.96
1.65 19.19
20.18
-0.89
-0.96
4.61 17.77
18.77
4.37 17.53
18.53
2.99 10.17
11.17
10.87 3.15
6.10 1.93 5.30
5.30
10.17
11.17
5.30
5.30
7.87 7.20
7.20
9.30
10.30
7.20
7.20
9.30
10.30
19 21.5
40
6.14 1.81 22.45
0 5.12 20.64 3.47 12.05 13.90 3.94
8.27 2.80 5.30
7.87 7.20 11.30
24 27.0
50
2.05 22.45
0 4.88 20.40
1.97 22.45
0 4.88 20.40
12.05
12.05
5.30
5.30
7.20 11.30
7.20 11.30
SK RV40 - 184 TC
- 213 TC
250 S and
300 S
8.03 2.62 28.07
29.67
0
-0.55
6.14 25.45
27.05
4.21 15.10
16.70
17.56 4.92 10.63 3.66 5.90
7.40
9.84 8.50
10.30
14.00
15.60
28 31.0
60
*KB= negative values are beyond SA2
Fitting flange
160 S
250 S
300 S
AD2
5.12
7.87
9.84
SA3
3.15
4.65
5.98
SA4
2.48
3.94
4.92
Mounting dimensions
AK2 GA2
4.331
0.47
7.087
9.055
0.63
0.79
AJ2
5.12
8.47
10.43
BB2
0.14
0.16
0.16
BF2
0.35
0.55
0.55
Technical design may be subject to change www.nord.com
G25
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
U -DESIGN, FLANGE MOUNTED, TRIPLE REDUCTION
SK 9052 VF with
AJ = 15.75 (8 holes)
SK 9012 VF thru SK 9052 VF with AJ £ 13.78 (4 holes)
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
AJ BB BF AH DB O QB C D B2 HF RA
SK 9012 VF
- R 150 U - 145 TC
SK 9082 VF
- R 375 U - 225 S
- R 400 U
- 225 M
- 250 M
- R 500 U - 280 S
- 280 M
- 315 S
AK
6.50
BD GA
0.14
0.43
5.118
7.87
0.47
BC EA Q SA
0.87
0.39
7.76
3.23
5.67
5.32
9.80
4.41
24.96
8.19
SK 9022 VF
- R 150 U - 145 TC
8.47
7.087
0.16
9.84
0.55
0.63
1.06
0.55
9.57
4.02
6.46
6.34
11.50
5.63
26.65
8.19
1.81
0.94
11.81
4.96
SK 9032 VF
- R 196 U - 182 TC
- 184 TC
8.47
0.16
0.55
7.087
or
10.43
9.055
9.84
0.16
11.81
0.63
0.55
0.79
13.78
0.20
0.71
7.87
7.72
13.11
7.09
30.20
9.84
SK 9052 VF
- R 300 U - 256 TC
- 284 TC
- 286 TC
- R 350 U - 200 L
11.811
or
15.75
15.75
0.20
0.79
8x0.71
13.780 17.72
0.87
3.50
1.61
16.81
7.28
11.42
11.42 19.09
10.32
43.54
16.30
43.54
16.30
SK 9062 VF 15.75
0.20
0.71
4.65
2.00
20.00
8.58
- R 300 U - 256 TC 13.780 17.72
0.87
13.78
13.58 22.36
12.40
48.58
16.30
- R 375 U - 225 S
- 225 M
- R 400 U - 250 M
54.72
19.69
54.72
19.69
19.69
0.20
0.71
6.42
2.05
24.33
9.45
17.717 21.65
1.10
17.72
16.54 28.35
14.76
60.08
19.69
60.08
19.69
63.23
19.69
EC
0.08
8.19
1.14
8.19
1.43
9.84
0.56
16.30
33.78
16.81
19.53
8.27
0.56
16.30
2.25
16.30
0.56
19.69
0.56
19.69
2.87
19.69
2.87
19.69
-0.48
19.69
LE
16.69
8.74
17.64
8.74
21.02
10.16
33.78
16.81
35.37
16.81
40.96
20.71
40.96
20.71
43.27
20.71
43.27
20.71
61.10
35.20
ZA
10.43
4.17
10.43
4.17
12.60
5.04
19.53
8.27
19.53
8.27
22.44
9.45
22.44
9.45
22.44
9.45
22.44
9.45
25.24
11.81
AB
5.30
9.70
17.91
17.91
20.28
FP
7.20
13.30
21.65
21.65
24.41
L
11.30
9.70
12.70
12.70
13.30
15.20
15.20
20.00
20.30
21.80
12.05
15.35
27.09
20.00
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
12.05
12.05
15.67
15.67
27.09
27.09
16.93
17.44
31.10
34.06
34.06
38.19
U UY
Key
1.250
1.36
2.36
1/4 x 1/4 x 2
1.375
1.51
2.76
5.30
7.20
11.30
5/16 x 5/16 x 2-1/4
1.750
1.92
3.54
5.90
5.90
8.50
8.50
12.30
14.00
3/8 x 3/8 x 2-3/4
2.875
3.20
3/4 x 3/4 x 3-1/2
3.625
4.01
7/8 x 7/8 x 4-5/8
4.375
4.82
1 x 1 x 5-3/4
V
5.51
6.69
8.27
Technical design may be subject to change. DXF files available upon request.
D26 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, SINGLE REDUCTION
Mounting dimensions
Outline dimensions Motor Shaft dimensions
Type
AJ
AK
BB
BD
BF AD1
GA AH1
C D B EC HF O5 QA R max SA SA1 Z AB FP L U UY
Key
V
SK 11EF - RV10 - 56 C
- RV20 - 56 C
- 143 TC
4.53
0.12 0.35 5.31 20.80 1.97
4.72 9.76
6.65 4.85
1.38 2.20
3.62 15.95 5.30 7.20 9.30 0.750 0.83
1.50
3.740 5.51 0.39 1.50 22.62
23.62
6.10 10.47
1.93
4.57 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
3/16 x 3/16 x 1
SK 21EF - RV30 - 145 TC 5.12
0.14 0.35 7.28 26.55 2.40
8.27 12.76 8.94 6.15
2.80 2.60
6.14 20.40 5.30 7.20 11.30 1.000 1.11
2.13
4.331 6.30 0.39 2.13
1/4 x 1/4 x 1-5/8
SK 31EF - RV30 - 145 TC 6.50
0.14 0.43 8.27 28.11 2.99
8.27 13.98 10.24 7.71
3.66 3.23
8.03 20.40 5.30 7.20 11.30 1.250 1.36
2.75
- RV40 - 184 TC
- 213 TC
5.118 7.87 0.47 2.75 33.16
34.76
10.63 15.75
8.03 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
1/4 x 1/4 x 2-1/4
SIZE
SK 11 EF ..
SK 12 EF ..
AJ
3.94
4.53
ADDITIONAL FLANGE SIZES AVAILABLE
AK BB BDBF
3.150
3.740
0.12
0.12
4.72
5.51
0.28
0.35
GA
0.39
0.39
Technical design may be subject to change.
www.nord.com
G27
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, DOUBLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
A E G J BA C D DB1 DB2 EC HF N O4 QA R max
Z AB FP L U UY V
SK 02 - RV10 - 56 C
B F H BJ
Key
5.12 4.33 0.47 0.98 1.97 23.04 3.39 3.62 0.23 4.72 8.98 1.62 6.02 7.09 1.38 15.95 5.30 7.20 9.30 0.750 0.83 1.50
SK 12
- RV 20 - 56 C
- RV10
- 143 TC 5.28 2.36 0.35
- 56 C
1.58 24.86
25.86
4.57 1.18 6.10 9.69
1.93 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
3/16 x 3/16 x 1
5.31 4.13 0.59 1.19 3.23 24.18 4.02 3.62
0 4.72 9.61 2.28 6.69 8.23 1.38 15.95 5.30 7.20 9.30 1.000 1.11 2.13
- RV20
- RV30
- 56 C
- 143 TC 5.47 2.44 0.35
- 145 TC
2.52 26.00
27.00
28.87
4.57 0.55 6.10 10.32
6.14 2.12 8.27 11.78
1.93 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
2.80 20.64 5.30 7.20 11.30
1/4 x 1/4 x 1-5/8
SK 22 - RV20 - 56 C
- 143 TC
7.28 6.30 0.71 1.38 3.30 27.33
28.33
4.92 4.57
0 6.10 11.22 2.95 8.86 9.80 1.93 17.53
5.30
18.53
5.30
7.20
7.20
9.30
10.30
1.250 1.36 2.75
- RV30 - 145 TC 6.89 3.15 0.43
30.20
6.14 1.72 8.27 12.68
2.80 20.40 5.30 7.20 11.30
- RV40
SK 32 - RV20 - 56 C
- 143 TC
- RV30
- 184 TC
- 213 TC
2.71 35.25
36.85
8.03 3.11 10.63 14.45
3.66 25.45
27.05
5.90
7.40
8.27 7.28 0.79 1.57 3.88 29.40
30.40
6.10 4.57
0 6.10 12.40 3.49 10.16 11.87 1.93 17.53
18.53
5.30
5.30
- 145 TC 8.43 4.72 0.51
32.27
6.14 0.04 8.27 13.86
8.50
10.30
14.00
15.60
1/4 x 1/4 x 2-1/4
7.20
7.20
9.30
10.30
2.80 20.40 5.30 7.20 11.30
1.625 1.79 3.25
- RV40 - 184 TC
- 213 TC
3.21 37.32
38.92
8.03 1.93 10.63 15.63
3.66 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
3/8 x 3/8 x 2-1/2
SK 42 - RV30 - 145 TC 8.46 6.89 0.98 1.57 5.08 34.18 6.89 6.14
0 8.27 14.65 3.74 11.81 13.78 2.80 20.40 5.30 7.20 11.301.875 2.09 3.50
- RV40 - 184 TC
- 213 TC 9.41 4.72 0.51
4.13
29.25
40.83
8.03 1.14 10.63 16.42
3.66 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
1/2 x 1/2 x 2-3/4
SK 52 - RV30 - 145 TC 10.24 8.66 1.38 1.77 5.18 36.21 8.35 6.14
0 8.27 16.11 4.24 13.27 15.81 2.80 20.40 5.30 7.20 11.302.250 2.47 4.00
- RV40 - 184 TC
- 213 TC 11.14 5.91 0.71
4.39
41.26
42.86
8.03
0 10.63 17.88
3.66 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
1/2 x 1/2 x 3-1/4
Technical design may be subject to change.
G28 www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, DOUBLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type AJ BB BF AD1 C EC HF O5 QA R max SA SA1 Z AB FP L U UY V
SK 02 F - RV10 - 53 C
AK
5.12
BD
0.14
GA
0.35
AH1
5.12 23.04 4.72
9.09 6.14
7.09
1.38
3.50
3.62 15.95 5.30
7.20
Key
9.30 0.750 0.83
1.50
- RV20 - 56 C
- 143 TC
SK 12 F - RV10 - 56 C
4.331
5.12
6.30
0.39
1.50
24.86
25.86
6.10
9.80
1.93
4.57 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
3/16 x 3/16 x 1
0.14
0.35
5.32 24.18 4.72
9.76 6.85
8.23
1.38
4.17
3.62 15.95 5.30
7.20
9.30 1.000 1.11
2.13
- RV20 - 56 C
- 143 TC 4.331
6.30
0.39
2.13
- RV30 - 145 TC
SK 22 F - RV20 - 56 C
- 143 TC
6.50
26.00
27.00
6.10 10.47
1.93
4.57 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
0.14
0.43
28.87 8.27 11.93
7.28 27.33
6.10 11.22 8.86
9.80
2.80
1.93
4.92
6.14 20.64 5.30
7.20 11.30
1/4 x 1/4 x 1-5/8
4.57 17.53
5.30
7.20
9.30
1.250 1.36
2.75
28.33
18.53
5.30
7.20
10.30
- RV30 - 145 TC
- RV40 - 184 TC
- 213 TC
SK 32 F - RV20 - 56 C
- 143 TC
5.118
8.46
7.87
0.16
0.47
0.55
30.20 8.27 12.68
2.75 35.25
36.85
8.27 29.40
30.40
10.63 14.45
2.80
3.66
6.10 12.40 10.16 11.87 1.93
6.10
6.14 20.40 5.30
7.20 11.30
8.03 25.45
27.05
4.57 17.53
18.53
5.90
7.40
5.30
5.30
8.50
10.30
7.20
7.20
14.00
15.60
1/4 x 1/4 x 2-1/4
9.30
11.30
1.625 1.79
3.25
32.27 8.27 13.86
2.80
6.14 20.40 5.30
7.20 11.30
- RV30 - 145 TC
- RV40 - 184 TC
- 213 TC
7.087
9.84
0.63
3.25 37.32
38.92
10.63 15.63
3.66
8.03 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
3/8 x 3/8 x 2-1/2
SK 42 F - RV30 - 145 TC
- RV40 - 184 TC
- 213 TC
8.46
7.087
0.16
0.55
8.47 34.18 8.27 14.65 11.81 13.78 2.80
6.89
6.14 20.40 5.30
7.20 11.30 1.875 2.09
3.50
9.84
0.63
3.50
39.25
40.83
10.63 16.42
3.66
8.03 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
1/2 x 1/2 x 2-3/4
SK 52 F - RV30 - 145 TC 10.43
0.16
0.55 10.24 36.21 8.27 16.11 13.27 15.81 2.80
8.35
6.14 20.40 5.30
7.20 11.30 2.250 2.47
4.00
- RV40 - 184 TC
- 213 TC 9.055
11.81
0.79
4.00
41.26
42.86
10.63 17.88
3.66
8.03 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
1/2 x 1/2 x 3-1/4 www.nord.com
SIZE
SK 02 F ..
SK 12 F ..
SK 22 F ..
SK 32 F ..
SK 42 F ..
SK 52 F ..
AJ
3.94 / 4.53
3.94 / 4.53
5.12
6.50
6.50
8.46
ADDITIONAL FLANGE SIZES AVAILABLE
AK
3.150 / 3.740
3.150 / 3.740
4.331
5.118
5.118
7.087
BB
0.12 / 0.12
0.12 / 0.12
0.14
0.14
0.14
0.16
BDBF
4.72 / 5.51
4.72 / 5.51
6.30
7.87
7.87
9.84
Technical design may be subject to change
0.28 / 0.35
0.28 / 0.35
0.35
0.43
0.43
0.55
GA
0.39 / 0.39
0.39 / 0.39
0.39
0.47
0.55
0.63
G29
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
A E G J BA C D DB1 DB2 HF N O4 QA R max
Z ZB AB FP L U UY V
SK 13 - RV10 - 56 C
B F H BJ DB Key
5.31 4.13 0.59 1.19 3.23 26.46 4.02 3.62 0.78 8.43 2.28 6.69 8.23 1.38 15.95 2.28 5.30 7.20 9.30 1.000 1.11 2.13
5.47 2.44 0.35
2.52
1.18
1/4 x 1/4 x 1-5/8
7.28 6.30 0.71 1.38 3.30 28.11 4.92 3.62 0.37 8.84 2.95 8.86 9.80 1.38 15.95 2.36 5.30 7.20 9.30 1.250 1.36 2.75
SK 23 - RV10 - 56 C
SK 33
- RV20 - 56 C
- 143 TC
- RV10 - 56 C
6.89 3.15 0.43
2.71
29.93
30.93 1.67
4.57 1.32 9.55
1.93 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
1/4 x 1/4 x 2-1/4
8.27 7.28 0.79 1.57 3.88 30.18 6.10 3.62
0 9.72 3.49 10.1611.87 1.38 15.95 2.36 5.30 7.20 9.30 1.625 1.79 3.25
- RV20 - 56 C
- 143 TC 8.43 4.72 0.51
3.21
32.00
33.00 1.97
4.57 0.44 10.43
1.93 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
3/8 x 3/8 x 2-1/2
SK 43 - RV20 - 56 C
- 143 TC
- RV30 - 145 TC
8.46 6.89 0.98 1.57 5.08 34.03
9.41 4.72 0.51
35.03
6.89 4.57 0.08 10.79 3.74 11.8113.78 1.93 17.53
18.53
4.13 36.90 2.40 6.14 1.65 12.25
2.80 20.40
2.72 5.30
5.30
7.20
7.20
9.30
10.30
1.875 2.09 3.50
5.30 7.20 11.30
1/2 x 1/2 x 2-3/4
SK 53 - RV20 - 56 C
- 143 TC
10.24 8.66 1.38 1.77 5.18 36.06
37.06
8.35 4.57
0 11.66 4.24 13.2715.81 1.93 17.53
18.53
2.72 5.30
5.30
7.20
7.20
9.30
10.30
2.250 2.47 4.00
- RV30 - 145 TC 11.14 5.91 0.71
- RV40 - 184 TC
4.39 38.93 2.99 6.14 0.78 13.12
43.98
8.03 2.67 14.89
2.80 20.40
3.66 25.45
5.30 7.20 11.30
5.30 8.50 14.00
1/2 x 1/2 x 3-1/4
G30
Technical design may be subject to change www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Mounting dimensions
Outline dimensions Motor Shaft dimensions
Type
AJ BB BF AD1 C D B HF O5 QA R max SA SA1 Z ZB AB FP L U UY V
SK 13 F - RV10 - 56 C
AK BD GA AH1 Key
5.12 0.14
0.35 3.23 26.46 1.18
8.03 6.85 8.23 1.38
4.17 3.62 15.94 2.28
5.30 7.20 9.30 1.000 1.11 2.13
4.331 6.30
0.39 2.52
1/4 x 1/4 x 1-5/8
SK 23 F - RV10 - 56 C
- RV20 - 56 C
- 143 TC
6.50 0.14
0.43 3.30 28.11 1.67
8.84 8.86 9.80 1.38
4.92 3.62 15.95 2.36
5.30 7.20 9.30 1.250 1.36 2.75
5.118 7.87
0.47 2.71
29.93
30.93
9.55
1.93
4.57 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
1/4 x 1/4 x 2-1/4
SK 33 F - RV10 - 56 C
- RV20 - 56 C
8.46 0.16
0.55 3.88 30.18 1.97
9.72 10.16 11.87 1.38
6.10 3.62 15.95 2.36
5.30 7.20 9.30 1.625 1.79 3.25
- 143 TC 7.087 9.84
0.63 3.21
32.00
33.00
10.43
1.93
4.57 17.77
18.77
5.30
5.30
7.20
7.20
9.30
10.30
3/8 x 3/8 x 2-1/2
SK 43 F - RV20 - 56 C
- 143 TC
- RV30 - 145 TC
SK 53 F - RV20 - 56 C
- 143 TC
8.46 0.16
0.55 5.08 34.03
35.03
7.087 9.84
10.43 0.16
0.63 4.13 36.90
0.55 5.18 36.06
37.06
2.40 10.79 11.81 13.78 1.93
12.25
2.80
2.99 11.66 13.27 15.81 1.93
6.89 4.57 17.53
18.53
6.14 20.40
8.35 4.57 17.53
18.53
2.72
5.30
5.30
7.20
7.20
9.30
10.30
1.875 2.09 3.50
5.30 7.20 11.30
1/2 x 1/2 x 2-3/4
2.72
5.30
5.30
7.20
7.20
9.30
10.30
2.250 2.47 4.00
- RV30 - 145 TC 9.055 11.81 0.79 4.39 38.93
- RV40 - 184 TC 43.98
13.12
14.89
2.80
3.66
6.14 20.40
8.03 25.45
5.30 7.20 11.30
5.90 8.50 14.00
1/2 x 1/2 x 3-1/4
SIZE
SK 13 F ..
SK 23 F ..
SK 33 F ..
SK 43 F ..
SK 53 F ..
AJ
3.94 / 4.53
5.12
6.50
6.50
8.46
ADDITIONAL FLANGE SIZES AVAILABLE
AK BB BDBF
3.150 / 3.740
0.12 / 0.12
4.72 / 5.51
0.28 / 0.35
4.331
5.118
5.118
7.087
0.14
0.14
0.14
0.16
6.30
7.87
7.87
9.84
0.35
0.43
0.43
0.55
GA
0.39 / 0.39
0.39
0.47
0.55
0.63
Technical design may be subject to change www.nord.com
G31
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Type
A
B
Mounting dimensions
J E
F
G
H
BA
BJ
C
Outline dimensions
DD HF N O4 QA R max Z
Motor
AB FP L
Shaft dimensions
U UY
Key
V
SK 63 - RV30 - 145 TC 12.99 10.24 1.77
2.76
6.34 38.43 9.84
6.14 17.60 5.24 15.75 18.03 2.80 20.40 5.30
7.20 11.30 2.500 2.77
5.00
- RV 40 - 184 TC
- 213 TC 13.58 11.61 0.87
5.43
43.48
45.08
8.03 19.37
3.66 25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
5/8 x 5/8 x 4
G32
Technical design may be subject to change.
www.nord.com
VARIABLE SPEED HELICAL GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Type
Mounting dimensions
AJ
AK
BB
BD
BF
GA
AD1
AH1
C HF
Outline dimensions
O5 QA R max SA SA1 Z AB
Motor
FP L
Shaft dimensions
U UY
Key
V
SK 63 F - RV30 - 145 TC 10.43
0.18
0.55
12.99 40.16 17.41 15.55 19.76
2.80
9.65
6.14
20.40
5.30
7.20 11.30 2.500
2.77
5.00
- RV40 - 184 TC
- 213 TC 9.055
11.81
0.95
5.00
45.21
46.81
19.18
3.66
8.03
25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
5/8 x 5/8 x 4
Technical design may be subject to change www.nord.com
G33
NOTES
G 34 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEAR UNITS www.nord.com
H1
VARIABLE SPEED HELICAL SHAFT MOUNTED GEAR UNITS
GEAR TYPE VARIABLE SPEED TYPE
SHAFT MOUNTING , HOLLOW SHAFT
SK 1282 A - SK 5282 A Helical Shaft Mounted Gearboxes, double reduction
SK 1382 A - SK 5382 A Helical Shaft Mounted Gearboxes, double reduction
RV 10
RV 20
RV 30
RV 40
Friction Drive Units
SHAFT MOUNTING , SOLID SHAFT
SK 1282 V - SK 5282 V Helical Shaft Mounted Gearboxes, double reduction
SK 1382 V - SK 5382 V Helical Shaft Mounted Gearboxes, double reduction
RV 10 B
RV 20 B
RV 30 B
RV 40 B
Friction Drive Units, corrosin resistant execution
HELICAL SHAFT MOUNTING GEAR UNITS - OPTIONS see catalog 1000
SHAFT MOUNTING WITH HOLLOW SHAFT
Variable speed helical shaft mounted gear motor with friction drive
H2
SHAFT MOUNTING WITH SOLID SHAFT
Variable speed helical shaft mounted gear motor with friction drive www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTED GEAR UNITS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
SPEED CONTROLS
EMFST= Electromechanical remote control
MOTOR
C - face 0.25 - 7.50 HP
56 C - 213 TC
SPEED INDICATORS
FAA= EMFST with remote speed indicator, analog
FAD = EMFST with remote speed indicator, digital
Washdown Duty
Energy Efficient
Single Phase
Stainless Steel
MOTOR OPTIONS
115 / 230 V
230 / 460 V
575 V
50 or 60 Hz
EXAMPLE FOR ORDERING:
SK 4282 - RV 30 - 145 TC
C - face motor / three phase 1.5 HP
Variable speed gear type
Helical Shaft Mounting Gear Motor, double reduction www.nord.com
H3
VARIABLE SPEED HELICAL SHAFT MOUNTED GEAR UNITS
MOUNTING POSITIONS
Horizontal position
H1
Vertical position
H2
Symbols:
H5
Vent plug Drain plug
H6
Oil level Rubber buffer
H3 H4
B5
B5 / 1
B5 / 2
B5 / 3
In all mounting positions the variable speed drive may be mounted at an angle of 90 o or 180 o
.
(affix: . /1 = right, . /2 = left, . /3 = below)
1
POSITION OF TERMINAL BOX AND CABLE ENTRY
Please specify position of terminal box and cable entry.
Normal design: Terminal box at 3, cable entry at I or III only.
If other positions required, please specify exactly when ordering.
2
II
III
IV
I
3
4
H4 www.nord.com
NOTES www.nord.com
H5
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.25
17
19
22
27
7.9
9.3
11.8
14.6
2.9
3.5
4.5
5.6
6.6
9.5
11.5
13.6
17
21
24
2.4
2.7
3.0
3.7
4.5
5.4
7.6
7.3
8.7
10.4
13.3
17
21
25
87
106
127
155
47
53
68
77
27
30
33
37
40
44
186
212
238
266
267
302
340
400
457
2188
2.4
2.7
3.2
3.8
1.1
1.3
1.7
2.1
0.4
0.5
0.6
0.8
0.9
1.4
1.6
1.9
2.5
3.0
3.5
0.3
0.4
0.4
0.5
0.6
0.8
1.1
1.0
1.2
1.5
1.9
2.4
3.0
3.5
6.8
7.6
9.7
11.0
12.4
15.0
18
22
3.8
4.3
4.7
5.3
5.6
6.3
38
43
49
57
27
30
34
38
65
312
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
T aI
[LB-IN]
3089
3823
3071
2487
2106
1761
1505
1177
956
840
742
627
524
5859
5151
4629
3726
3071
2602
1832
1469
1212
1027
809
663
571
1920
1602
1336
1044
821
670
560
295
262
204
181
161
131
110
90.3
517
460
422
375
353
314
75.2
65.5
58.4
52.2
52.2
46.0
40.7
34.5
30.1
6.4
4.6
5.2
6.9
7.7
2.4
2.7
3.2
4.0
1.0
1.0
1.2
1.5
2.0
5.0
6.3
6.8
8.0
9.2
9.2
1.2
1.3
1.6
2.0
2.5
2.7
4.0
1.2
1.5
1.6
1.9
2.4
3.6
4.3
5.9
7.3
9.7
11.0
12.4
15.2
18.1
20.6
3.9
4.3
5.7
6.4
5.9
7.3
21.1
22.2
22.8
21.3
24.4
22.1
23.0
24.0
24.8
No
Gearbox
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor f
BI
Ratio i ges
Type
763.41
623.10
482.56
390.93
330.45
276.27
236.11
185.11
149.96
131.86
116.35
98.35
82.22
919.00
808.42
726.61
584.13
482.56
408.58
287.14
230.83
190.69
161.46
126.93
104.05
89.60
300.93
251.67
209.87
163.93
128.82
105.11
87.94
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
8.21
7.24
6.43
5.47
4.79
22.5
SK 3382 - RV 10 - 56C
SK 2382 - RV 10 - 56C
SK 1382 - RV 10 - 56C
SK 1282 - RV 10 - 56C
SK - RV 10 F - 56C
0.7
1:7
79
0.7
1:7
88
(460V)
I
N
[A]
I regel
[LBS]
0.7
1:7
154
0.7
1:7
119
0.7
1:7
49
H6 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.33
68
77
87
106
127
155
186
212
40
44
47
53
27
30
33
37
238
266
267
302
340
400
457
2188
5.6
6.6
7.9
9.3
11.8
14.6
17
19
22
27
8.7
10.4
13.3
17
21
25
3.0
3.7
4.5
5.4
7.6
9.5
11.5
13.6
17
21
24
18
22
27
30
9.7
11.0
12.4
15.0
5.6
6.3
6.8
7.6
3.8
4.3
4.7
5.3
34
38
38
43
49
57
65
312
0.8
0.9
1.1
1.3
1.7
2.1
2.4
2.7
3.2
3.8
1.2
1.5
1.9
2.4
3.0
3.5
0.4
0.5
0.6
0.8
1.1
1.4
1.6
1.9
2.5
3.0
3.5
0.50
4.5
5.4
7.6
9.5
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
0.6
0.8
1.1
1.4
275
243
217
177
148
121
101
88.5
696
620
568
505
475
423
396
352
78.8
70.8
70.8
62.0
54.9
46.9
40.7
8.6
3354
2841
2372
2027
1593
1283
1133
1000
844
706
6239
5018
4142
3505
2469
1982
1637
1389
1089
894
769
2159
1805
1407
1106
903
755 f
BI
7.2
8.2
9.2
11.2
13.4
15.3
15.7
16.4
4.4
5.4
4.4
5.5
2.9
3.2
4.2
4.7
16.9
15.7
18.0
16.4
17.0
17.6
18.3
No
Gearbox
1.1
1.5
1.8
2.0
2.4
3.0
3.4
3.8
5.1
5.7
1.1
1.2
1.4
1.8
2.6
3.2
1.2
1.4
1.9
2.0
2.9
3.7
4.7
5.0
6.0
6.8
6.8
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
6275
5319
3735
3000
1.2
1.3
1.9
2.4
Ratio Type i ges
390.93
330.45
276.27
236.11
185.11
149.96
131.86
116.35
98.35
82.22
726.61
584.13
482.56
408.58
287.14
230.83
190.69
161.46
126.93
104.05
89.60
251.67
209.87
163.93
128.82
105.11
87.94
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
9.18
8.24
8.21
7.24
6.43
5.47
4.79
SK 3382 - RV 10 - 56C
SK 2382 - RV 10 - 56C
SK 1382 - RV 10 - 56C
SK 1282 - RV 10 - 56C
SK - RV 10 F - 56C
(460V)
I
N
[A]
I regel
[LBS]
0.8
1:7
157
0.8
1:7
121
482.56
408.58
287.14
230.83
SK 3382 - RV 10 - 56C
0.8
1:7
51
1.1
1:7
157
0.8
1:7
82
0.8
1:7
90 www.nord.com
H7
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.50
11.5
13.6
17
21
24
7.9
9.3
11.8
14.6
17
19
22
27
17
21
25
68
77
87
106
127
155
186
212
40
44
47
53
27
30
33
37
238
266
267
302
340
400
457
2188
2.4
3.0
3.5
18
22
27
30
9.7
11.0
12.4
15.0
5.6
6.3
6.8
7.6
3.8
4.3
4.7
5.3
34
38
38
43
49
57
65
312
1.1
1.3
1.7
2.1
2.4
2.7
3.2
3.8
1.6
1.9
2.5
3.0
3.5
0.75
8.1
8.8
10.8
12.8
14.2
16
3.1
3.8
4.2
5.1
6.0
6.6
1.2
1.3
1.5
1.8
2.0
2.2
0.4
0.5
0.6
0.7
0.9
0.9
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
1673
1372
1142
418
368
328
267
224
183
153
135
1053
938
862
766
720
641
601
535
119
107
107
93.8
84.1
70.8
62.0
13.0
2478
2097
1655
1354
1168
3593
3071
2407
1947
1717
1513
1283
1071
13691
11151
10275
8363
7071
6487
5283
4868
3965
3354
3009
2717 f
BI
8.9
10.1
10.4
10.8
4.8
5.4
6.1
7.5
2.9
3.6
2.9
3.6
1.9
2.1
2.8
3.1
11.2
10.4
11.9
10.8
11.1
11.7
12.0
No
Gearbox
1.2
1.7
2.1
1.2
1.3
1.6
2.0
2.2
2.5
3.4
3.8
3.1
3.3
3.9
4.5
4.5
4.4
4.6
6.4
6.4
7.2
7.4
1.6
2.1
2.2
3.2
3.3
3.5
Ratio i ges
Type
128.82
105.11
87.94
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
81.17
72.17
66.23
58.89
55.39
49.25
46.19
41.07
9.18
8.24
8.21
7.24
6.43
5.47
4.79
190.69
161.46
126.93
104.05
89.60
276.27
236.11
185.11
149.96
131.86
116.35
98.35
82.22
SK 3382 - RV 10 - 56C
SK 2382 - RV 10 - 56C
SK 1382 - RV 10 - 56C
SK 1282 - RV 10 - 56C
SK - RV 10 F - 56C
(460V)
I
N
[A]
I regel
[LBS]
1.1
1:7
157
1.1
1:7
121
1.1
1:7
90
1.1
1:7
82
1.1
1:7
51
1.6
1:7
329
700.03
570.18
525.20
427.79
361.69
331.48
269.99
248.70
202.57
171.27
153.92
138.82
SK 5382 - RV 20 - 56 C
H8 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
52
57
69
76
39
41
46
49
19
22
25
27
31
34
85
92
97
102
108
131
7.6
9.5
11.5
13.6
17
11.8
14.6
17
19
41
42
50
60
22
27
31
34
19
24
26
7.2
8.0
8.6
10.4
11.4
13.7
16
18
21
25
3.6
4.1
4.9
5.3
5.6
6.3
6.7
7.4
8.1
9.8
10.9
5.6
5.9
6.5
7.0
2.8
3.1
3.5
3.9
4.4
4.9
12.1
13.2
13.9
14.6
15.0
19
1.1
1.4
1.6
1.9
2.5
1.7
2.1
2.4
2.7
5.8
6.0
7.1
8.5
3.1
3.8
4.5
4.9
2.7
3.4
3.8
1.6
1.9
2.2
2.6
1.0
1.1
1.2
1.5
3.0
3.6
0.5
0.6
0.7
0.8
0.8
0.9
1.0
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
5620
4514
3726
3159
2487
2195
1974
1735
1558
1381
1257
1089
1035
938
877
822
756
625
561
506
464
439
418
395
326
3620
2929
2575
2274
1974
1611
1363
1248
1053
1009
855
715
2292
1797
1620
11850
10416
8708
8062
7646
6744
6390
5921
5328
4947
4133
3744
3133
2752
2319
2027
1699 f
BI
6.5
7.4
7.2
7.2
5.2
7.2
5.2
7.4
3.0
3.6
3.8
4.7
3.6
5.8
7.4
7.2
7.9
7.4
7.9
8.0
1.3
1.6
2.1
2.2
2.6
1.1
1.3
1.5
1.7
4.1
3.8
5.0
5.8
1.6
2.4
2.9
3.1
7.4
7.2
7.4
3.8
4.7
5.2
6.2
2.4
2.6
3.1
3.4
7.0
7.0
1.1
1.4
1.7
1.8
1.9
2.2
2.4
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
Ratio Type i ges
287.14
230.83
190.69
161.46
126.93
112.23
100.88
88.74
79.76
70.56
64.12
55.79
52.97
48.04
44.85
42.02
38.62
31.93
28.70
25.88
23.71
22.45
21.38
20.18
16.67
185.11
149.96
131.86
116.35
100.98
82.42
69.67
63.83
53.96
51.71
43.71
36.54
117.37
91.71
82.72
605.88
532.44
445.23
412.38
390.76
344.84
326.81
302.65
272.54
253.12
211.09
191.57
160.20
140.60
118.38
103.82
86.83
SK 5382 - RV 20 - 56 C
SK 4382 - RV 20 - 56 C
SK 3382 - RV 10 - 56C
SK 3282 - RV 20 - 56 C
SK 2382 - RV 10 - 56C
SK 2282 - RV 20 - 56 C
1.6
1:7
329
1.6
1:7
240
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
165
1.6
1:7
174
1.6
1:7
130
1.6
1:7
141 www.nord.com
H9
1.00
16
19
24
26
8.8
10.8
12.8
14.2
3.1
3.8
4.2
5.1
6.0
6.6
8.1
4.9
5.3
5.6
6.3
6.7
7.2
8.0
8.6
10.4
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
77
87
106
127
155
186
212
238
30
37
44
53
68
266
267
302
340
400
457
70
74
82
88
100
118
132
165
185
2188
22
27
30
34
11.0
12.4
15.0
18
4.3
5.3
6.3
7.6
9.7
38
38
43
49
57
65
10.0
10.5
11.6
12.5
14.2
17
19
24
26
312
2.2
2.7
3.4
3.8
1.3
1.5
1.8
2.0
0.4
0.5
0.60
0.7
0.9
0.9
1.2
0.7
0.8
0.8
0.9
1.0
1.0
1.1
1.2
1.5
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
1407
1151
965
804
627
554
493
403
336
276
230
203
180
161
160
142
126
107
93.8
611
580
525
489
428
362
323
258
231
19.6
18275
14886
13709
11169
9443
8655
7045
6496
5292
4469
4018
3629
3062
2398
2159
11620
10770
10204
9000
8531
7903
7115
6611
5514 f
BI
No
Gearbox
6.7
6.9
7.2
7.4
3.6
4.0
4.9
5.9
1.4
2.1
2.4
2.4
3.2
6.9
8.0
7.2
7.4
7.7
8.0
6.4
6.2
5.9
6.7
7.0
7.0
7.2
7.0
7.2
5.6
5.6
5.4
5.6
3.5
4.8
4.8
5.4
1.2
1.6
1.6
2.4
2.5
2.6
3.3
1.3
1.3
1.4
1.6
1.8
1.8
2.0
2.3
2.5
Ratio Type i ges
72.17
58.89
49.25
41.07
32.08
28.33
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
8.21
7.24
6.43
5.47
4.79
31.23
29.65
26.83
24.97
21.90
18.51
16.53
13.23
11.81
SK 2282 - RV 20 - 56 C
SK 1282 - RV 10 - 56C
SK - RV 10 F - 56C
1.6
1:7
90
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
141
1.6
1:7
60
2.1
1:7
329
700.03
570.18
525.20
427.79
361.69
331.48
269.99
248.70
202.57
171.27
153.92
138.82
117.37
91.71
82.72
445.23
412.38
390.76
344.84
326.81
302.65
272.54
253.12
211.09
SK 5382 - RV 20 - 56C
SK 4382 - RV 20 - 56C 2.1
1:7
240
H10 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
11.4
13.7
16
18
21
25
9.5
11.5
13.6
17
41
46
49
52
57
69
76
19
22
25
27
31
34
39
85
92
97
102
108
17
19
74
82
88
100
50
59
60
70
118
132
165
185
22
27
31
34
41
42
30
37
44
53
68
77
1.6
1.9
2.2
2.6
3.0
3.6
1.4
1.6
1.9
2.5
5.9
6.5
7.0
7.4
8.1
9.8
10.9
2.8
3.1
3.5
3.9
4.4
4.9
5.6
12.1
13.2
13.9
14.6
15.0
2.4
2.7
17
19
24
26
7.1
8.4
8.5
10.0
10.5
11.6
12.5
14.2
3.1
3.8
4.5
4.9
5.8
6.0
4.3
5.3
6.3
7.6
9.7
11.0
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
5000
4186
3673
3089
2708
2266
6027
4983
4213
3310
1381
1257
1168
1097
1009
834
750
2929
2637
2319
2080
1841
1673
1460
675
619
586
558
527
3443
3036
2637
2151
1823
1664
1407
1354
1142
974
956
815
774
700
652
572
483
432
345
308
1885
1540
1283
1071
837
740 f
BI
2.9
3.5
3.9
4.7
5.2
5.2
1.2
1.5
1.7
2.0
5.4
3.9
5.6
4.8
5.6
5.4
5.4
2.2
2.7
2.8
3.5
2.7
4.3
3.9
5.6
5.4
6.0
5.6
6.0
1.1
1.3
4.7
4.4
5.0
5.2
3.8
3.9
4.3
4.8
5.2
5.4
5.2
5.4
1.2
1.8
2.2
2.3
3.0
2.8
1.1
1.6
1.8
1.8
2.4
2.7
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
Ratio Type i ges
191.57
160.20
140.60
118.38
103.82
86.83
230.83
190.69
161.46
126.93
112.23
100.88
88.74
79.76
70.56
64.12
55.79
52.97
48.04
44.85
42.02
38.62
31.93
28.70
25.88
23.71
22.45
21.38
20.18
131.86
116.35
SK 4382 - RV 20 - 56C
SK 3382 - RV 20 - 56C
SK 3282 - RV 20 - 56C
SK 2382 - RV 20 - 56C
100.98
82.42
69.67
63.83
53.96
51.71
43.71
37.18
36.54
31.23
29.65
26.83
24.97
21.90
18.51
16.53
13.23
11.81
72.17
58.89
49.25
41.07
32.08
28.33
SK 2282 - RV 20 - 56C
SK 1282 - RV 20 - 56C
2.1
1:7
192
2.1
1:7
174
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
240
2.1
1:7
117
2.1
1:7
157
2.1
1:7
141 www.nord.com
H11
1.50
11.4
13.7
16
18
21
25
6.3
6.7
7.2
8.0
8.6
10.4
4.2
5.1
6.0
6.6
8.1
8.8
10.8
12.8
14.2
16
19
24
26
13.6
17
31
34
39
41
19
22
25
27
46
49
52
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
266
267
302
340
400
457
87
106
127
155
186
212
238
2188
38
38
43
49
57
65
12.4
15.0
18
22
27
30
34
312
1.6
1.9
2.2
2.6
3.0
3.6
0.9
1.0
1.0
1.1
1.2
1.5
2.0
2.2
2.7
3.4
3.8
1.2
1.3
1.5
1.8
0.6
0.7
0.9
0.9
1.9
2.5
4.4
4.9
5.6
5.9
2.8
3.1
3.5
3.9
6.5
7.0
7.4
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
13487
12788
11841
10664
9903
8257
7496
6266
5496
4629
4062
3398
20541
16735
14151
12965
10558
9726
7921
6699
6018
5434
4593
3584
3239
6319
4965
4390
3947
3469
3124
2761
2505
2186
2071
1876
1752
1646
215
214
189
168
142
125
658
537
450
368
307
270
240
26.1
f
BI
1.9
2.3
2.6
3.1
3.5
3.5
1.1
1.2
1.2
1.3
1.6
1.7
3.6
3.7
3.7
3.6
3.7
2.2
2.3
3.2
3.2
1.1
1.6
1.6
1.7
1.1
1.3
1.8
2.9
2.6
3.6
1.5
1.8
1.9
2.3
2.6
3.7
3.2
No
Gearbox
5.2
6.0
5.4
5.6
5.8
6.0
3.0
3.7
4.4
5.0
5.2
5.4
5.6
Ratio i ges
Type
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
8.21
7.24
6.43
5.47
4.79
SK 1282 - RV 20 - 56C
SK - RV 20 F - 56C 2.1
1:7
86
344.84
326.81
302.65
272.54
253.12
211.09
191.57
160.20
140.60
118.38
103.82
86.83
525.20
427.79
361.69
331.48
269.99
248.70
202.57
171.27
153.92
138.82
117.37
91.71
82.72
161.46
126.93
SK 5382 - RV 20 - 143TC
SK 4382 - RV 20 - 143TC
SK 3382 - RV 20 - 143TC
112.23
100.88
88.74
79.76
70.56
64.12
55.79
52.97
48.04
44.85
42.02
SK 3282 - RV 20 - 143TC
3.0
1:7
196
3.0
1:7
179
3.0
1:7
333
3.0
1:7
245
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
117
H12 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.50
186
212
238
266
267
302
340
400
457
87
106
127
155
44
53
68
77
2188
60
70
74
82
88
100
118
27
31
34
41
42
50
132
165
185
57
69
76
85
92
97
102
108
38
43
49
57
27
30
34
38
65
6.3
7.6
9.7
11.0
12.4
15.0
18
22
312
8.5
10.0
10.5
11.6
12.5
14.2
17
19
24
26
3.8
4.5
4.9
5.8
6.0
7.1
8.1
9.8
10.9
12.1
13.2
13.9
14.6
15.0
2.00
19
24
29
30
37
8.2
10.3
12.8
13.7
17
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
2.7
3.4
4.2
4.2
5.2
1.2
1.5
1.8
2.0
2.5
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
460
404
359
322
321
283
251
214
188
1929
1611
1257
1106
982
804
673
552
39.1
3221
2726
2496
2115
2027
1708
1434
1221
1159
1053
974
857
724
647
518
462
1513
1248
1124
1009
929
878
836
789
13974
11089
8947
8346
6629
5991
4841
3929
3841
3115 f
BI
No
Gearbox
4.0
3.6
3.7
3.9
3.5
3.6
3.7
3.5
4.0
2.0
2.5
2.9
3.4
1.2
1.2
1.6
1.8
2.9
3.2
3.1
2.9
3.4
3.5
3.5
1.2
1.4
1.5
2.0
1.9
2.5
3.6
3.5
3.6
3.7
3.6
3.6
3.7
3.6
4.0
3.7
4.0
7.3
7.3
8.0
7.3
8.0
3.5
3.6
4.7
5.8
6.0
Ratio i ges
Type
82.42
69.67
63.83
53.96
51.71
43.71
36.54
31.23
29.65
26.83
24.97
21.90
18.51
16.53
13.23
11.81
38.62
31.93
28.70
25.88
23.71
22.45
21.38
20.18
11.76
10.34
9.18
8.24
8.21
7.24
6.43
5.47
4.79
49.25
41.07
32.08
28.33
25.22
20.57
17.21
14.11
SK 3282 - RV 20 - 143TC
SK 2282 - RV 20 - 143TC
SK 1282 - RV 20 - 143TC
SK - RV 20 F - 143TC
(460V)
I
N
[A]
I regel
[LBS]
3.0
1:7
179
3.0
1:7
121
3.0
1:7
146
3.0
1:7
90
267.59
212.33
171.34
159.88
126.87
114.79
92.63
75.18
73.50
59.66
SK 6382 - RV 30 - 145TC 3.4
1:7
509 www.nord.com
H13
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
24
32
39
16
18
21
25
8.6
10.4
11.4
13.7
5.1
6.0
6.6
8.1
8.8
10.8
12.8
14.2
16
19
98
102
120
144
173
202
237
263
307
361
29
36
42
50
60
68
83
17
21
57
69
76
85
92
97
41
46
49
52
25
27
34
39
3.4
4.5
5.6
2.2
2.6
3.0
3.6
1.2
1.5
1.6
1.9
0.7
0.9
0.9
1.2
1.3
1.5
1.8
2.0
2.2
2.7
25
29
34
37
13.9
14.5
17
21
44
51
4.1
5.1
6.0
7.1
8.6
9.6
11.9
2.5
3.0
8.1
9.8
10.9
12.1
13.2
13.9
5.9
6.5
7.0
7.4
3.5
3.9
4.9
5.6
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
4797
3584
2921
13213
11018
10001
8363
7346
6177
5425
4531
22337
18886
17311
14098
12983
10576
8939
8036
7248
6124
1168
1124
947
794
662
566
482
435
373
317
3938
3213
2726
2283
1903
1690
1372
6487
5434
4637
4168
3345
2912
2770
2505
2345
2195
2018
1664
1496
1354
1239
1168
4.0
6.3
7.4
2.0
2.3
2.7
3.4
1.2
1.3
1.4
1.8
1.2
1.2
1.3
1.6
1.7
2.5
2.6
3.3
3.7
3.8
8.0
8.5
8.9
8.0
7.3
8.0
8.0
8.0
8.5
8.9
2.8
4.1
5.3
5.9
5.9
6.5
8.0
1.0
1.1
2.8
3.9
4.2
4.4
4.2
4.8
2.7
2.0
2.8
3.0
1.4
1.7
2.2
2.0
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
Ratio i ges
Type
91.81
68.63
55.90
253.12
211.09
191.57
160.20
140.60
118.38
103.82
86.83
427.79
361.69
331.48
269.99
248.70
202.57
171.27
153.92
138.82
117.37
75.39
61.60
52.20
43.65
36.40
32.34
26.25
22.39
21.45
18.18
15.20
12.68
10.85
9.23
8.33
7.13
6.06
126.93
104.05
SK 5382 - RV 30 - 145TC
SK 5282 - RV 30 - 145TC
SK 4382 - RV 30 - 145TC
SK 4282 - RV 30 - 145TC
SK 3382 - RV 30 - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
373
88.74
79.76
64.12
55.79
52.97
48.04
44.85
42.02
38.62
31.93
28.70
25.88
23.71
22.45
SK 3282 - RV 30 - 145TC
3.4
1:7
331
3.4
1:7
284
3.4
1:7
251
3.4
1:7
236
3.4
1:7
218
H14 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
102
108
131
155
192
223
263
327
385
70
74
82
88
100
118
132
34
41
42
50
60
165
185
216
242
261
293
340
383
485
238
266
267
302
340
400
457
87
106
127
155
186
212
2188
10.0
10.5
11.6
12.5
14.2
17
19
4.9
5.8
6.0
7.1
8.5
37
42
49
55
24
26
31
35
69
14.6
15.0
19
22
27
32
38
47
55
34
38
38
43
49
57
65
12.4
15.0
18
22
27
30
312
3.00
17
19
24
29
8.2
10.3
12.8
13.7
37
2.5
2.7
3.4
4.2
1.2
1.5
1.8
2.0
5.2
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
3336
2814
2699
2283
1912
1628
1549
1398
1301
1142
965
863
691
617
530
472
437
390
335
298
235
1115
1053
871
736
594
512
434
350
296
1319
1071
903
736
614
540
480
430
428
378
335
286
250
52.2
No
Gearbox
2.4
2.5
2.2
2.9
3.3
4.0
4.2
1.1
1.5
1.4
1.9
2.2
4.0
4.2
4.4
4.6
4.0
4.2
4.4
4.6
4.8
4.4
4.8
4.8
4.8
5.0
5.0
4.8
5.0
5.2
3.5
3.9
3.0
4.1
4.3
4.5
4.3
1.5
1.9
2.2
2.5
2.9
3.2
4.0
4.9
4.9
5.3
2.3
2.4
3.1
3.9
5.3
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
20930
16611
13408
12505
9930
8983
7248
5885
4664 f
BI
Ratio i ges
Type
63.83
53.96
51.71
43.71
36.54
31.23
29.65
26.83
24.97
21.90
18.51
16.53
13.23
11.81
10.15
9.03
8.37
7.48
6.43
5.72
4.51
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
25.22
20.57
17.21
14.11
11.76
10.34
9.18
8.24
8.21
7.24
6.43
5.47
4.79
SK 3282 - RV 30 - 145TC
SK 2282 - RV 30 - 145TC
SK 1282 - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
218
3.4
1:7
161
3.4
1:7
185
267.59
212.33
171.34
159.88
126.87
114.79
92.63
75.18
59.66
SK 6382 - RV 30 - 145TC
3.4
1:7
130
4.8
1:7
509 www.nord.com
H15
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
3.00
43
52
60
71
76
90
14.2
16
19
107
116
124
142
168
204
231
251
305
346
54
65
72
88
24
32
39
46
21
25
54
59
68
83
98
102
120
29
36
42
49
50
144
173
202
237
263
307
361
34
41
49
57
69
76
6.1
7.3
8.6
10.1
10.9
12.8
2.0
2.2
2.7
24
29
33
36
15.0
17
18
20
44
49
7.6
9.3
10.2
12.5
3.4
4.5
5.6
6.6
3.0
3.6
7.7
8.5
9.6
11.9
13.9
14.5
17
4.1
5.1
6.0
6.9
7.1
21
25
29
34
37
44
51
4.9
5.9
7.0
8.1
9.8
10.9
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
3991
3319
2841
2416
2248
1912
12045
10859
9186
1593
1478
1372
1204
1018
838
740
681
561
496
7186
5372
4372
3699
3195
2620
2390
1956
8124
6797
5894
4823
4080
3522
3416
3186
2876
2531
2053
1752
1682
1425
1186
991
849
722
651
558
474
5018
4142
3505
3018
2496
2248
5.7
5.3
5.7
5.9
5.7
5.9
2.2
2.5
2.5
6.2
6.8
6.7
6.2
5.6
6.2
6.0
6.2
6.8
6.7
5.2
5.6
5.2
5.6
2.6
4.2
4.9
4.9
1.8
2.3
3.4
4.1
4.3
5.3
4.9
5.3
5.3
1.9
2.7
3.5
3.1
4.0
5.3
5.3
5.7
5.9
5.3
5.7
5.9
1.4
1.8
1.9
1.9
2.6
2.8
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
Ratio i ges
Type
51.07
42.46
36.34
30.91
28.72
24.42
153.92
138.82
117.37
20.36
18.88
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
91.81
68.63
55.90
47.27
40.80
33.43
30.50
25.00
103.82
86.83
SK 6382 - RV 30 - 145TC
SK 5382 - RV 30 - 145TC
SK 5282 - RV 30 - 145TC
SK 4382 - RV 30 - 145TC
(460V)
I
N
[A]
I regel
[LBS]
4.8
1:7
509
4.8
1:7
373
4.8
1:7
331
4.8
1:7
284
4.8
1:7
251
75.39
61.60
52.20
45.05
43.65
40.74
36.81
32.34
26.25
22.39
21.45
18.18
15.20
12.68
10.85
9.23
8.33
7.13
6.06
64.12
52.97
44.85
38.62
31.93
28.70
SK 4282 - RV 30 - 145TC
SK 3282 - RV 30 - 145TC 4.8
1:7
218
H16 www.nord.com
5.00
14.2
16
19
24
32
39
42
52
60
71
76
24
29
37
43
90
8.2
10.3
12.8
13.7
17
19
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
3.00
118
132
165
185
216
242
261
50
60
70
82
91
100
293
340
383
485
192
223
263
327
385
85
92
97
102
108
131
155
2188
17
19
24
26
31
35
37
42
49
55
69
7.1
8.5
10.0
11.6
13.0
14.2
27
32
38
47
55
12.1
13.2
13.9
14.6
15.0
19
22
312
2.8
3.2
3.7
4.8
6.4
7.8
8.5
10.3
12.1
14.2
15.0
4.7
5.8
7.3
8.6
18.0
1.6
2.1
2.6
2.7
3.5
3.8
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
3416
2859
2443
2097
1876
1717
1451
1292
1035
920
794
706
655
585
503
448
353
2027
1859
1752
1673
1575
1301
1106
894
766
650
524
444
78.2
20028
18063
15266
11948
8930
7275
6699
34816
27621
22293
20798
16505
14930
12054
9779
7761
6646
5522
4726
4018
3735
3177 f
BI
No
Gearbox
2.7
2.8
2.7
2.8
2.9
3.0
2.7
2.8
2.9
3.0
3.2
1.3
1.4
1.6
1.5
1.6
2.2
3.3
3.4
3.2
3.4
3.5
2.9
2.8
3.2
2.9
3.2
3.2
3.2
1.3
1.5
1.5
1.6
2.5
3.0
3.4
3.2
3.4
3.6
3.4
2.9
3.2
3.2
3.4
3.6
1.4
1.4
1.9
2.3
2.4
2.9
Ratio i ges
Type
43.71
36.54
31.23
26.83
23.96
21.90
18.51
16.53
13.23
11.81
10.15
9.03
8.37
7.48
6.43
5.72
4.51
25.88
23.71
22.45
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
SK 3282 - RV 30 - 145TC
SK 2282 - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
4.8
1:7
218
4.8
1:7
185
4.8
1:7
130
267.59
212.33
171.34
159.88
126.87
114.79
92.63
75.18
59.66
51.07
42.46
36.34
30.91
28.72
24.42
153.92
138.82
117.37
91.81
68.63
55.90
51.49
SK 6382 - RV 40 - 184TC
SK 5382 - RV 40 - 184TC
SK 5282 - RV 40 - 184TC
7.6
1:5
450
7.6
1:5
408
7.6
1:5
587 www.nord.com
H17
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
5.00
124
142
168
204
231
251
305
346
46
52
62
72
88
107
116
21
25
102
120
144
173
59
68
82
98
29
36
42
49
50
54
57
202
237
263
307
361
85
92
97
102
108
131
155
192
223
263
327
385
41
49
57
69
76
46
50
61
69
25
28
34
41
9.3
10.4
12.4
14.4
18
22
23
4.2
5.0
40
47
53
61
72
20
24
29
35
11.8
13.7
16
20
5.8
7.1
8.4
9.7
10.0
10.8
11.4
22
26
31
38
17
18
20
20
45
53
65
77
8.3
9.8
11.3
13.7
15.0
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
2292
2000
1690
1389
1230
1133
929
824
6151
5460
4611
3965
3257
2646
2460
13505
11293
4788
4168
3478
2912
2788
2363
1974
1646
9806
8018
6788
5859
5682
5301
4983
1407
1204
1080
929
789
6894
5832
5027
4151
3735
3363
3089
2921
2779
2628
2168
1832
1478
1274
1080
872
739
4.0
3.7
4.1
4.0
3.6
3.7
3.7
4.1
2.9
4.6
4.6
3.1
3.4
3.4
3.7
1.1
1.4
3.2
3.2
3.2
3.2
2.5
3.7
3.7
2.9
1.1
1.6
2.1
1.9
2.4
2.1
2.9
3.4
3.6
3.2
3.4
3.6
2.6
2.6
2.6
2.9
2.2
2.2
2.2
2.3
2.9
2.6
2.9
3.1
1.1
1.1
1.1
1.6
1.9
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
Ratio i ges
Type
47.27
41.94
35.46
30.50
25.00
20.36
18.88
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
103.82
86.83
SK 5282 - RV 40 - 184TC
SK 4382 - RV 40 - 184TC
(460V)
I
N
[A]
I regel
[LBS]
7.6
1:5
408
7.6
1:5
362
7.6
1:5
329
75.39
61.60
52.20
45.05
43.65
40.74
38.31
36.81
32.04
26.72
22.39
21.45
18.18
15.20
12.68
10.85
9.23
8.33
7.13
6.06
52.97
44.85
38.62
31.93
28.70
25.88
23.71
22.45
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
SK 4282 - RV 40 - 184TC
SK 3282 - RV 40 - 184TC 7.6
1:5
295
H18 www.nord.com
7.50
12.8
13.7
17
19
24
29
37
43
52
60
71
76
90
107
116
124
142
52
62
72
88
24
32
39
42
46
168
204
231
251
305
346
102
120
144
173
57
68
82
98
36
42
49
50
54
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
5.00
165
185
216
242
261
293
340
383
485
2188
33
37
43
49
52
59
68
77
97
438
22
23
25
28
10.4
12.4
14.4
18
4.8
6.4
7.8
8.5
9.3
34
41
46
50
61
69
8.6
10.3
12.1
14.2
15.0
18
2.6
2.7
3.5
3.8
4.7
5.8
7.3
7.1
8.4
9.7
10.0
10.8
20
24
29
35
11.4
13.7
16
20
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
17957
13425
10930
10071
9248
8204
6938
5965
4885
3983
3690
3443
3009
2540
2097
1850
1699
1398
1239
33515
31267
24815
22452
18116
14700
11664
9992
8301
7107
6045
5620
4779
12045
10213
8815
8540
7965
7496
6266
5230
4381
4195
3558
2974
2478
1717
1540
1319
1177
1089
974
836
744
587
130 f
BI
No
Gearbox
2.1
2.2
2.4
2.5
2.1
2.2
2.4
2.5
2.8
2.3
2.5
2.4
2.5
3.1
3.1
2.1
2.3
1.1
1.7
2.0
2.3
2.0
2.5
2.7
2.7
2.5
2.7
2.7
2.3
2.1
2.3
2.4
2.3
2.4
1.5
1.6
1.6
1.9
1.9
2.1
2.1
2.1
2.1
2.1
2.1
1.9
2.5
2.5
1.9
1.1
1.4
1.2
1.6
1.4
Ratio i ges
Type
13.23
11.81
10.15
9.03
8.37
7.48
6.43
5.72
4.51
SK 2282 - RV 40 - 184TC
SK - RV 40 F - 184TC
(460V)
I
N
[A]
I regel
[LBS]
7.6
1:5
262
7.6
1:5
207
91.81
68.63
55.90
51.49
47.27
41.94
35.46
30.50
25.00
20.36
18.88
17.59
15.38
13.00
10.71
9.46
8.70
7.17
6.33
171.34
159.88
126.87
114.79
92.63
75.18
59.66
51.07
42.46
36.34
30.91
28.72
24.42
61.60
52.20
45.05
43.65
40.74
38.31
32.04
26.72
22.39
21.45
18.18
15.20
12.68
SK 6382 - RV 40 - 213 TC
SK 5282 - RV 40 - 213 TC
SK 4282 - RV 40 - 213 TC
11
1:5
626
11
1:5
448
11
1:5
368 www.nord.com
H19
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
7.50
202
237
263
307
361
261
293
340
383
485
118
132
165
185
216
242
102
108
131
155
76
85
92
97
192
223
263
327
385
2188
52
59
68
77
97
24
26
33
37
43
49
38
45
53
65
77
20
22
26
31
15
17
18
20
438
40
47
53
61
72
VARIABLE SPEED HELICAL SHAFT MOUNTED GEARED MOTORS
2124
1805
1628
1398
1186
3620
3230
2584
2310
1982
1770
1637
1460
1257
1115
882
5611
5062
4637
4390
4177
3947
3257
2761
2221
1920
1628
1310
1115
196
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
No
Gearbox
1.4
1.5
1.6
1.7
1.9
1.2
1.3
1.4
1.5
1.6
1.7
1.9
1.9
1.7
1.9
2.1
1.5
1.7
1.7
1.7
1.3
1.4
1.4
1.5
2.3
2.4
2.1
2.3
2.4
Ratio i ges
Type
10.85
9.23
8.33
7.13
6.06
SK 4282 - RV 40 - 213 TC
(460V)
I
N
[A]
I regel
[LBS]
11
1:5
368
18.51
16.53
13.23
11.81
10.15
9.03
8.37
7.48
6.43
5.72
4.51
28.70
25.88
23.71
22.45
21.38
20.18
16.67
14.11
11.38
9.80
8.31
6.70
5.68
SK 3282 - RV 40 - 213 TC
SK 2282 - RV 40 - 213 TC
SK - RV 40 F - 213TC
11
1:5
335
11
1:5
302
11
1:5
247
H20 www.nord.com
VARIABLE SPEED MOTORS
FRICTION DRIVE UNITS
Type Fitting flange
SA2 N
Outline dimensions Motor Shaft dimensions
(mm)
Z2 * KB Z1 Z Z3 Z4 HF1 H EC Rmax AB BDM FP L U UY V
SK RV10 - 56 C
160 S 3.62 1.22 17.17 -1.38 3.23 15.95 2.64 10.08 9.21 3.15
4.72 1.38 5.30
4.13 7.20 9.30
14 16.0
30
SK RV20 - 56 C
- 143 TC
- 56 C
- 143 TC
160 S
250 S
SK RV30 - 145 TC
- 145 TC
- 145 TC
160 S
250 S
300 S
4.57 1.42 19.19
20.18
-0.89
-0.96
1.65 19.19
20.18
-0.89
-0.96
4.61 17.77
18.77
4.37 17.53
18.53
2.99 10.17
11.17
10.87 3.15
6.10 1.93 5.30
5.30
10.17
11.17
5.30
5.30
7.87 7.20
7.20
9.30
10.30
7.20
7.20
9.30
10.30
19 21.5
40
6.14 1.81 22.45
0 5.12 20.64 3.47 12.05 13.90 3.94
8.27 2.80 5.30
7.87 7.20 11.30
24 27.0
50
2.05 22.45
0 4.88 20.40
1.97 22.45
0 4.88 20.40
12.05
12.05
5.30
5.30
7.20 11.30
7.20 11.30
SK RV40 - 184 TC
- 213 TC
250 S and
300 S
8.03 2.62 28.07
29.67
0
-0.55
6.14 25.45
27.05
4.21 15.10
16.70
17.56 4.92 10.63 3.66 5.90
7.40
9.84 8.50
10.30
14.00
15.60
28 31.0
60
*KB= negative values are beyond SA2
Fitting flange
160 S
250 S
300 S
AD2
5.12
7.87
9.84
SA3
3.15
4.65
5.98
SA4
2.48
3.94
4.92
Mounting dimensions
AK2 GA2
4.331
0.47
7.087
9.055
0.63
0.79
AJ2
5.12
8.47
10.43
BB2
0.14
0.16
0.16
BF2
0.35
0.55
0.55
Technical design may be subject to change www.nord.com
H21
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 1282 V - RV 10
- RV 20
- 56 C
- 56 C
- 143 TC
- RV 30 - 145 TC
SK 2282 V - RV 20 - 56 C
AD
DB
4.53
4.80
4.96
DF
D1
GE
GF
H2
N
O
QA
SA
C EC HF Rmax SA1 Z AB FP L U UY
Key
6.50
0.55
10.98
23.15
4.72
13.42
1.38
3.62
15.95
5.30
7.20
9.30
1.250
1.36
V
2.75
6.22
0.43
7.20
24.97
6.10
14.13
1.93
4.57
17.77
5.30
7.20
9.30
1.34
2.90
3.03
25.97
18.77
5.30
7.20
10.30
27.84
8.27
15.59
2.80
6.14
20.64
5.30
7.20
11.30
1/4 x 1/4 x 2-1/4
8.31
0.63
13.27
25.44
6.10
15.63
1.93
4.57
17.53
5.30
7.20
9.30
1.375
1.51
2.75
- RV 30
- RV 40
SK 3282 V - RV 20
- 143 TC
- 145 TC
- 184 TC
- 213 TC
- 56 C
5.79
6.38
7.48
0.55
7.91
26.44
18.53
5.30
7.20
10.30
1.50
2.95
3.54
28.31
8.27
17.09
2.80
6.14
20.40
5.30
7.20
11.30
33.36
10.63
18.86
3.66
8.03
25.45
5.90
8.50
14.00
34.96
27.05
7.40
10.30
15.60
5/16 x 5/16 x 2-1/8
9.84
0.71
15.24
26.97
6.10
17.52
1.93
4.57
17.53
5.30
7.20
9.30
1.875
2.09
3.50
8.90
0.55
9.44
27.97
18.53
5.30
7.20
10.30
- 143 TC
- RV 30 - 145 TC 7.01
1.54
3.74
4.21
29.84
8.27
18.98
2.80
6.14
20.40
5.30
7.20
11.30
- RV 40 - 184 TC 34.89
10.63
20.75
3.66
8.03
25.45
5.90
8.50
14.00
- 213 TC 36.49
27.05
7.40
10.30
15.60
1/2 x 1/2 x 2-3/4
SK 4282 V - RV 30 - 145 TC 7.13
11.06
0.87
17.87
31.84
8.27
20.71
2.80
6.14
20.40
5.30
7.20
11.30
2.250
2.47
4.00
- RV 40 - 184 TC 10.04
0.87
11.44
36.89
10.63
22.48
3.66
8.03
25.45
5.90
8.50
14.00
- 213 TC 8.11
1.89
4.28
4.84
38.49
27.05
7.40
10.30
15.60
1/2 x 1/2 x 3-1/4
SK 5282 V - RV 30 - 145 TC 8.47
13.42
1.10
20.75
33.39
8.27
23.39
2.80
6.14
20.40
5.30
7.20
11.30
2.500
2.77
5.00
- RV 40 - 184 TC
- 213 TC 9.88
12.05
0.87
12.99
38.44
10.63
25.16
3.66
8.03
25.45
5.90
8.50
14.00
2.09
5.30
5.75
40.04
27.05
7.40
10.30
15.60
5/8 x 5/8 x 4
SK 6382 V - RV 30 - 145 TC 10.75
14.06
1.38
22.79
36.18
8.27
25.59
2.80
6.14
20.40
5.30
7.20
11.30
3.000
3.33
5.50
- RV 40 - 184 TC 13.78
1.02
15.78
41.23
10.63
27.36
3.66
8.03
25.45
5.90
8.50
14.00
- 213 TC 11.06
2.78
5.83
6.77
42.83
27.05
7.40
10.30
15.60
3/4x 3/4 x 4-1/2
Technical design may be subject to change.
H22 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
Type
SK 1282 A - RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
SK 2282 A - RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
- RV 40 - 184 TC
- 213 TC
SK 3282 A - RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
- RV 40 - 184 TC
4.53
4.96
6.38
DF
D1
GE
GF
H2
O
QA
SA
C EC HF Rmax SA1 Z AB FP L ADH
DH
LH
UH
UYH
Key
4.80
1.34
10.98
20.40
4.72
13.42
1.38
3.62
15.95
5.30
7.20
9.30
4.80
1.57
31.39
10.63
20.75
3.66
8.03
25.45
5.90
8.50
14.00
X
X1
0.12
6.50
0.55
4.45
22.22
6.10
14.13
1.93
4.57
17.77
5.30
7.20
9.30
1.77
1.188
0.16
6.22
0.43
3.03
23.22
25.09
8.27
15.59
2.80
6.14
18.77
20.64
5.30
5.30
7.20
7.20
10.30
11.30
1.31
1/4 x 1/4 x 3-1/4
5.79
1.50
13.27
22.69
6.10
15.63
1.93
4.57
17.53
5.30
7.20
9.30
5.47
1.97
0.31
8.31
0.63
5.16
23.69
18.53
5.30
7.20
10.30
1.97
1.438
0.20
7.48
0.55
3.54
25.56
8.27
17.09
2.80
6.14
20.40
5.30
7.20
11.30
30.61
10.63
18.86
3.66
8.03
25.45
5.90
8.50
14.00
1.61
32.21
27.05
7.40
10.30
15.60
3/8 x 3/8 x 3-1/4
7.01
1.54
15.24
23.47
6.10
17.52
1.93
4.57
17.53
5.30
7.20
9.30
6.85
2.28
0.24
9.84
0.71
5.94
24.47
18.53
5.30
7.20
10.30
2.17
1.625
0.24
8.90
0.55
4.21
26.34
8.27
18.98
2.80
6.14
20.40
5.30
7.20
11.30
1.73
- 213 TC 32.99
27.05
7.40
10.30
15.60
3/8 x 1/4 x 4
SK 4282 A - RV 30 - 145 TC
- RV 40 - 184 TC
- 213 TC
7.13
8.11
1.89
17.87
27.84
8.27
20.71
2.80
6.14
20.40
5.30
7.20
11.30
7.68
2.56
11.06
10.04
0.87
0.87
7.44
4.84
32.89
34.49
10.63
22.48
3.66
8.03
25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
2.76
2.062
0.28
0.28
2.23
1/2 x 3/8 x 5-1/4
SK 5282 A - RV 30 - 145 TC
- RV 40 - 184 TC
- 213 TC
8.47
9.88
2.09
20.75
28.39
8.27
23.39
2.80
6.14
20.40
5.30
7.20
11.30
9.06
2.95
13.42
12.05
1.10
0.87
7.99
5.75
33.44
35.04
10.63
25.16
3.66
8.03
25.45
27.05
5.90
7.40
8.50
10.30
14.00
15.60
3.35
2.438
2.71
5/8 x 5/8 x 7
SK 6382 A - RV 30 - 145 TC 10.75
11.06
2.78
22.79
30.68
8.27
23.39
2.80
6.14
20.40
5.30
7.20
11.30
11.42
3.54
0.30
0.30
0.33
- RV 40 - 184 TC
- 213 TC
14.06
1.38
10.28
35.73
10.63
25.16
3.66
8.03
25.45
5.90
8.50
14.00
3.94
2.750
0.33
13.78
1.02
6.77
37.33
27.05
7.40
10.30
15.60
3.03
5/8 x 5/8 x 8
Technical design may be subject to change.
www.nord.com
H23
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
SK 1382 V
SK 2382 V
Type
- RV 10 - 56 C
- RV 10 - 56 C
- RV 20 - 56 C
SK 3382 V - RV 10 - 56 C
- RV 20 - 56 C
AD
DB
DB1
4.53
4.80
1.18
4.96
5.79
1.67
6.38
7.01
DF
D1
GE
GF
H2
N
O
QA
SA
ZB C HF Rmax SA1 Z AB FP L U UY
Key
6.50
0.55
10.98
2.28
25.43
12.24
1.38
3.62
15.95
5.30
7.20
9.30
1.250
1.36
V
2.75
6.22
0.43
7.20
1.34
2.90
3.03
1/4 x 1/4 x 2-1/4
8.31
0.63
13.27
2.36
26.22
13.25
1.38
3.62
15.95
5.30
7.20
9.30
1.375
1.51
2.75
7.48
0.55
7.91
1.50
8.90
2.95
0.55
3.54
9.44
28.04
13.96
1.93
4.57
17.77
5.30
7.20
9.30
29.57
15.55
1.93
4.57
17.77
5.30
7.20
9.30
5/16 x 5/16 x 2-1/8
9.84
0.71
15.24
2.36
27.75
14.84
1.38
3.62
15.95
5.30
7.20
9.30
1.875
2.09
3.50
SK 4382 V
- 143 TC 1.97
- RV 30 - 145 TC
- RV 20 - 56 C
1.54
3.74
4.21
30.57
18.77
5.30
7.20
10.30
32.20
17.01
2.80
6.14
20.40
5.30
7.20
11.30
1/2 x 1/2 x 2-3/4
7.13
11.06
0.87
17.87
2.72
31.69
16.85
1.93
4.57
17.53
5.30
7.20
9.30
2.250
2.47
4.00
- 143 TC 8.11
10.04
0.87
11.44
32.69
18.53
5.30
7.20
10.30
- RV 30 - 145 TC 2.40
1.89
4.28
4.84
34.56
18.31
2.80
6.14
20.40
5.30
7.20
11.30
- RV 40 - 182 TC
- 184 TC
SK 5382 V - RV 20 - 56 C
- 143 TC 9.88
12.05
0.87
12.99
37.91
20.08
3.66
8.03
23.75
5.90
8.50
12.30
39.61
34.24
25.45
18.53
5.90
5.30
8.50
7.20
14.00
10.30
1/2 x 1/2 x 3-1/4
8.47
13.42
1.10
20.75
2.72
33.24
18.94
1.93
4.57
17.53
5.30
7.20
9.30
2.500
2.77
5.00
- RV 30 - 145 TC 2.99
- RV 40 - 184 TC
2.09
5.30
5.75
36.11
20.40
2.80
6.14
20.40
5.30
7.20
11.30
41.16
22.17
3.66
8.03
25.45
5.90
8.50
14.00
5/8 x 5/8 x 4
Technical design may be subject to change.
H24 www.nord.com
VARIABLE SPEED HELICAL SHAFT MOUNTING GEARED MOTORS
WITH FRICTION DRIVE, TRIPLE REDUCTION
Gear reducer dimensions Outline dimensions Motor dimensions Shaft dimensions
SK 1382 A
SK 2382 A
Type
- RV 10 - 56 C
- RV 10 - 56 C
- RV 20 - 56 C
AD
DB
DB1
DF
D1
GE
GF
H2
O
QA
SA
ZB
C
4.53
4.80
1.18
6.50
0.55
4.45
22.68
12.24
1.38
6.22
0.43
3.03
1.34
10.98
2.28
3.62
15.95
5.30
4.96
5.79
1.67
8.31
7.48
0.63
0.55
5.16
3.54
1.50
13.27
2.36
23.47
25.29
13.25
13.96
1.38
1.93
3.62
15.95
5.30
4.57
17.77
5.30
SK 3382 A - RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
SK 4382 A - RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
- RV 40 - 182 TC
-184 TC
SK 5382 A - RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
- RV 40 - 184 TC
6.38
7.01
1.97
9.84
0.71
5.94
24.25
14.84
1.38
8.90
0.55
4.21
26.07
15.55
1.93
1.54
15.24
2.36
27.07
28.70
17.01
2.80
7.13
11.06
0.87
7.44
27.69
16.85
1.93
8.11
10.04
0.87
2.40
1.89
17.87
4.84
2.72
28.69
30.56
18.31
2.80
33.91
20.08
3.66
8.47
13.42
1.10
35.61
7.99
28.24
18.94
1.93
9.88
12.05
0.87
2.99
2.09
20.75
5.75
2.72
29.24
31.11
20.40
2.80
36.16
22.17
3.66
HF Rmax SA1 Z AB
3.62
15.95
5.30
4.57
17.77
5.30
18.77
5.30
6.14
20.40
5.30
4.57
17.53
5.30
18.53
5.30
6.14
20.40
5.30
8.03
23.75
5.90
25.45
5.90
4.57
17.53
5.30
18.53
5.30
6.14
20.40
5.30
8.03
25.45
5.90
FP
7.20
7.20
7.20
L
9.30
9.30
9.30
ADH
DH
4.80
LH
UH
UYH
Key
1.57
X
X1
0.12
1.77
1.188
0.16
1.31
1/4 x 1/4 x 3-1/4
5.47
1.97
0.31
1.97
1.438
0.20
1.61
3/8 x 3/8 x 3-1/4
6.85
2.28
0.24
7.20
9.30
7.20
9.30
7.20
10.30
7.20
11.30
2.17
1.625
0.24
7.68
1.73
3/8 x 1/4 x 4
2.56
0.28
7.20
9.30
7.20
10.30
2.76
2.062
0.28
7.20
11.30
8.50
12.30
2.23
8.50
7.20
14.00
9.30
1/2 x 3/8 x 5-1/4
9.06
2.95
0.30
7.20
10.30
3.35
2.438
0.30
7.20
11.30
8.50
14.00
2.71
5/8 x 5/8 x 7
Technical design may be subject to change.
www.nord.com
H25
NOTES
H26 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEAR UNITS www.nord.com
I1
VARIABLE SPEED HELICAL-BEVEL GEAR UNITS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
GEAR TYPE VARIABLE SPEED TYPE
FOOT MOUNTED , SOLID SHAFT
SK 9012 - SK 9052 =
SK 9013 - SK 9053 =
SHAFT MOUNTED , HOLLOW SHAFT
Helical-Bevel Gearboxes, triple reduction
Helical-Bevel Gearboxes, quadruple reduction
RV 10
RV 20
RV 30
RV 40
Friction Drive Units
SK 9012 AZ - SK 9052 AZ =
SK 9013 AZ - SK 9053 AZ =
Helical-Bevel Gearboxes, triple reduction
Helical-Bevel Gearboxes, quadruple reduction
FLANGE MOUNTED , SOLID SHAFT, FLANGE B5
RV 10 B
RV 20 B
RV 30 B
RV 40 B
Friction Drive Units, corrosin resistant
SK 9012 VF - SK 9052 VF =
SK 9013 VF - SK 9053 VF =
Helical-Bevel Gearboxes, triple reduction
Helical-Bevel Gearboxes, quadruple reduction
HELICAL-BEVEL GEAR UNITS - OPTION see catalog 1000
FOOT MOUNTED, SOLID SHAFT
Variable Speed Helical-Bevel Geared Motor with friction drive variable speed
I2
SHAFT MOUNTED, HOLLOW SHAFT
Variable Speed Helical-Bevel Geared Motor with friction drive variable speed www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEAR UNITS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
SPEED CONTROLS
EMFST= Electromechanical remote control
MOTOR
C - face 0.25 - 7.50 HP
56 C - 213 TC
SPEED INDICATORS
FAA= EMFST with remote speed indicator, analog
FAD = EMFST with remote speed indicator, digital
Washdown Duty
Energy Efficient
Single Phase
Stainless Steel
MOTOR OPTIONS
115 / 230 V
230 / 460 V
575 V
50 or 60 Hz
EXAMPLE FOR ORDERING:
SK 9042 - RV 30 - 145 TC
C - face motor / three phase 1.5 HP
Variable speed gear type
Helical-Bevel Gear Motor, triple reduction www.nord.com
I3
B3
B6 I
VARIABLE SPEED HELICAL-BEVEL GEAR UNITS
MOUNTING POSITIONS
FOOT MOUNTED
B3 I
B6 II
B6
B8
B8 I V5 / V5 I
FLANGE MOUNTED
V6 / V6 I
B5 B5 I B5 II
I4
Symbols: Vent plug
B5 III
Drain plug
V1
Oil level
V3
Mounting surface www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEAR UNITS
MOUNTING POSITIONS
SHAFT MOUNTED
H1 H2
H3 H4
Symbols: Vent plug
H5
Drain plug
H6
Oil level
Mounting surface
In all mounting positions the variable speed drive may be mounted at an angle of 90 o or 180 o
.
(affix: ./1 = right, ./2 = left, ./3 = below)
B 5/2
B 5/3
B 5
B 5/1
II
III
IV
I
POSITION OF TERMINAL BOX AND
CABLE ENTRY
Please specify position of terminal box and cable entry.
Normal design:
Terminal box at 3, cable entry at I or III only.
If other positions required, please specify exactly when ordering.
2
1
3
4 www.nord.com
I5
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.25
9.9
14.1
16
20
22
28
1.9
3.1
6.4
7.3
9.5
5.0
6.8
7.8
10.3
12.3
15.0
29
35
40
45
53
63
70
8.9
10.6
11.9
18
20
22
25
79
89
105
125
143
179
202
237
270
2188
3.2
4.0
4.6
6.2
8.1
10.1
13.0
1.4
2.0
2.2
2.8
3.1
3.9
0.3
0.4
0.9
1.0
1.4
0.7
1.0
1.1
1.5
1.8
2.2
0.4
0.6
0.7
0.9
1.2
1.4
1.9
4.1
5.0
5.7
6.4
7.5
9.0
9.9
1.3
1.5
1.7
2.5
2.8
3.2
3.6
20
26
29
34
11.3
12.7
14.9
18
39
312
0.33
3.2
4.0
4.6
6.2
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
0.4
0.6
0.7
0.9
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
4.5
5.4
5.9
7.5
10.0
12.6
1.0
1.2
2.9
3.3
4.3
1.3
1.7
2.0
2.6
3.1
3.9
7.3
8.8
10.1
11.4
13.3
15.9
17.7
2.3
2.7
3.0
4.5
5.1
5.7
6.5
20.1
22.6
23.3
23.7
24.5
22.1
22.8
23.9
24.5
No
Gearbox
2.6
3.3
3.5
5.1
6.7
8.4
10.7
6372
4549
2177
1912
1469
1407
991
894
711
635
506
2797
2044
1797
1354
1133
903
4425
3443
3018
2257
1708
1372
1071
488
400
351
312
266
222
200
1566
1310
1168
787
699
620
548
176
157
133
112
97.4
77.9
69.0
58.4
51.3
6.4
Ratio Type i ges
694.00
540.95
473.10
353.52
268.61
215.59
168.05
1128.95
713.97
342.01
299.96
230.21
220.93
155.28
139.72
111.47
99.63
79.49
439.46
320.60
281.92
212.83
177.88
141.29
246.37
205.93
183.10
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9033 - RV 10 - 56C
SK 9023 - RV 10 - 56C
SK 9022 - RV 10 - 56C
SK 9013 - RV 10 - 56C
SK 9012 - RV 10 - 56C
SK - RV 10 F - 56C
(460V)
I
N
[A]
I regel
[LBS]
0.7
1:7
194
5956
4646
4062
3036
1.9
2.5
2.6
3.8
694.00
540.95
473.10
353.52
SK 9033 - RV 10 - 56C
0.7
1:7
49
0.8
1:7
196
0.7
1:7
115
0.7
1:7
126
0.7
1:7
143
0.7
1:7
132
I6 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.33
9.9
14.1
16
20
22
28
33
37
42
44
6.8
7.8
8.1
10.1
13.0
6.4
7.3
9.5
53
63
70
79
29
35
40
45
8.9
10.6
11.9
18
20
22
25
89
105
125
143
179
202
237
270
2188
1.4
2.0
2.2
2.8
3.1
3.9
4.7
5.3
6.0
6.2
1.0
1.1
1.2
1.4
1.9
0.9
1.0
1.4
7.5
9.0
9.9
11.3
4.1
5.0
5.7
6.4
1.3
1.5
1.7
2.5
2.8
3.2
3.6
26
29
34
39
12.7
14.9
18
20
312
0.50
3.2
4.0
4.6
6.2
8.1
10.1
13.0
6.4
7.3
9.5
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
0.4
0.6
0.7
0.9
1.2
1.4
1.9
0.9
1.0
1.4
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
1894
1336
1204
956
855
682
574
504
450
428
2752
2416
2310
1850
1443
2938
2575
1974
657
539
473
420
358
299
270
237
2115
1770
1575
1062
938
835
738
211
179
150
131
105
92.9
79.7
69.0
8.6
3.4
4.0
4.4
5.6
7.5
9.3
11.1
12.7
14.2
13.3
1.3
1.5
5.0
6.2
8.0
2.2
2.5
3.2
9.9
11.8
13.1
14.9
5.4
6.6
7.5
8.4
1.7
2.0
2.2
3.3
3.8
4.2
4.8
16.8
17.3
17.6
18.2
16.3
17.0
17.5
18.3
No
Gearbox
Ratio Type i ges
268.61
215.59
168.05
342.01
299.96
230.21
220.93
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
320.60
281.92
SK 9033 - RV 10 - 56C
SK 9023 - RV 10 - 56C
SK 9022 - RV 10 - 56C
SK 9013 - RV 10 - 56C
246.37
205.93
183.10
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9012 - RV 10 - 56C
SK - RV 10 F - 56C
0.8
1:7
135
0.8
1:7
196
0.8
1:7
146
(460V)
I
N
[A]
I regel
[LBS]
9027
7036
6151
4602
3496
2805
2186
4452
3903
2991
1.3
1.6
1.7
2.5
3.3
4.1
5.3
1.4
1.6
2.1
694.00
540.95
473.10
353.52
268.61
215.59
168.05
342.01
299.96
230.21
SK 9033 - RV 10 - 56C
SK 9023 - RV 10 - 56C
0.8
1:7
128
0.8
1:7
117
0.8
1:7
51
1.1
1:7
196
1.1
1:7
146 www.nord.com
I7
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.50
105
125
143
179
202
237
270
63
70
79
89
35
40
45
53
20
22
25
29
8.9
10.6
11.9
18
9.9
14.1
16
20
22
28
33
37
42
44
2188
9.0
9.9
11.3
12.7
5.0
5.7
6.4
7.5
2.8
3.2
3.6
4.1
1.3
1.5
1.7
2.5
14.9
18
20
26
29
34
39
1.4
2.0
2.2
2.8
3.1
3.9
4.7
5.3
6.0
6.2
312
0.75
4.0
5.5
6.4
8.0
9.6
13.1
4.6
1.6
1.8
2.3
3.1
3.8
5.2
6.2
8.2
9.5
13.2
0.6
0.8
0.9
1.1
1.4
1.9
0.7
0.2
0.3
0.3
0.4
0.6
0.7
0.9
1.2
1.4
1.9
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
10806
7788
6673
5319
4478
3275
9257
27462
23647
18293
13815
11390
8195
6850
5204
4496
3239
816
718
637
542
453
409
359
319
3204
2682
2381
1611
1425
1266
1115
991
272
227
199
159
141
120
105
2876
2018
1814
1451
1292
1035
871
764
682
650
13.0
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
7.8
8.7
9.9
11.1
4.3
4.9
5.6
6.5
2.5
2.8
3.2
3.6
1.1
1.3
1.5
2.2
11.4
11.6
12.0
10.8
11.2
11.6
12.0
No
Gearbox
2.2
2.6
2.9
3.7
4.9
6.2
7.3
8.3
9.3
8.8
Ratio Type i ges
246.37
205.93
183.10
123.48
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
220.93
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
SK 9022 - RV 10 - 56C
SK 9012 - RV 10 - 56C
SK - RV 10 F - 56C
2.0
2.5
3.2
4.0
4.7
6.5
1.1
1.4
1.5
2.0
2.7
3.3
3.9
5.4
7.1
7.2
7.2
1404.06
1209.13
935.38
706.53
582.18
419.22
350.22
266.11
229.93
165.63
552.33
397.98
341.02
271.87
228.91
167.32
473.10
SK 9053 - RV 20 - 56 C
SK 9043 - RV 20 - 56 C
SK 9033 - RV 10 - 56C
1.1
1:7
51
1.6
1:7
523
1.6
1:7
351
1.6
1:7
232
1.1
1:7
117
(460V)
I
N
[A]
I regel
[LBS]
1.1
1:7
135
I8 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
105
125
143
179
63
70
79
89
35
40
45
53
20
22
25
29
202
237
270
2188
37
42
44
49
55
74
83
9.9
14.1
16
20
22
28
33
17
20
22
26
29
37
44
6.2
7.4
8.6
9.8
10.8
12.4
14.7
9.0
9.9
11.3
12.7
14.9
18
20
26
29
34
39
5.0
5.7
6.4
7.5
2.8
3.2
3.6
4.1
312
5.3
6.0
6.2
6.9
7.8
10.6
11.9
1.4
2.0
2.2
2.8
3.1
3.9
4.7
2.4
2.8
3.1
3.7
4.1
5.3
6.3
0.9
1.1
1.2
1.4
1.5
1.8
2.1
1.00
1.8
2.3
3.1
3.8
5.2
6.2
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
0.3
0.3
0.4
0.5
0.7
0.9
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
No
Gearbox
7.6
7.7
8.0
7.2
5.2
5.8
6.5
7.4
2.9
3.3
3.7
4.3
1.6
1.9
2.1
2.4
7.4
7.7
8.0
5.5
6.2
5.8
7.2
8.0
7.2
7.4
1.5
1.7
1.9
2.4
3.3
4.1
4.9
4.1
5.3
5.4
7.0
7.4
8.0
7.4
1.5
2.0
2.3
2.6
2.9
3.3
4.0
681
615
541
480
408
342
299
239
2151
1903
1682
1496
1230
1080
956
814
212
181
158
19.6
1151
1027
974
881
784
575
514
4319
3036
2735
2177
1947
1558
1310
2567
2177
1956
1655
1487
1159
974
6868
5806
5000
4363
3956
3452
2912
Ratio Type i ges
220.93
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
29.42
26.27
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
59.38
49.61
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9032 - RV 20 - 56 C
SK 9022 - RV 10 - 56C
SK 9012 - RV 10 - 56C
SK - RV 10 F - 56C
31568
24417
18443
15195
10947
9142
1.1
1.5
2.0
2.4
2.9
4.1
1209.13
935.38
706.53
582.18
419.22
350.22
SK 9053 - RV 20 - 56C
1.6
1:7
86
2.1
1:7
523
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
214
1.6
1:7
143
1.6
1:7
126 www.nord.com
I9
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
8.2
9.5
13.2
4.0
5.5
6.4
8.0
9.6
13.1
70
79
89
105
40
45
53
63
20
22
25
29
35
125
143
179
202
237
270
2188
44
49
55
74
28
33
37
42
83
9.9
14.1
16
20
22
20
22
26
29
37
44
6.2
7.4
8.6
9.8
10.8
12.4
14.7
17
1.2
1.4
1.9
0.6
0.8
0.9
1.1
1.4
1.9
9.9
11.3
12.7
14.9
5.7
6.4
7.5
9.0
2.8
3.2
3.6
4.1
5.0
18
20
26
29
34
39
312
6.2
6.9
7.8
10.6
3.9
4.7
5.3
6.0
11.9
1.4
2.0
2.2
2.8
3.1
2.8
3.1
3.7
4.1
5.3
6.3
1.5
1.8
2.1
2.4
0.9
1.1
1.2
1.4
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
No
Gearbox
4.3
4.9
5.5
5.7
2.5
2.8
3.3
3.9
1.2
1.4
1.6
1.8
2.2
5.8
6.0
5.4
5.6
5.8
6.0
4.4
5.4
6.0
5.4
3.1
3.7
4.2
4.6
5.6
1.1
1.3
1.5
1.8
2.4
4.0
4.1
5.2
5.6
6.0
5.6
2.2
2.5
3.0
3.1
1.2
1.5
1.7
2.0
5.4
5.4
5.4
1.5
1.9
2.4
3.0
3.6
4.9
6947
6000
4328
14417
10390
8903
7098
5974
4372
2867
2540
2248
2000
1637
1443
1274
1089
912
821
722
641
545
456
399
319
283
241
212
26.1
5770
4053
3646
2912
2602
2071
1743
1531
1372
1301
1177
1044
768
686
9160
7753
6673
5823
5275
4611
3885
3434
2903
2611
2204
1991
1549
1292
Ratio Type i ges
266.11
229.93
165.63
552.33
397.98
341.02
271.87
228.91
167.32
220.93
155.28
139.72
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
29.42
26.27
350.99
296.91
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
59.38
49.61
109.79
97.36
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
SK 9053 - RV 20 - 56C
SK 9043 - RV 20 - 56C
SK 9032 - RV 20 - 56C
SK 9022 - RV 20 - 56C
SK 9012 - RV 20 - 56C
SK - RV 20 F - 56C
2.1
1:7
523
2.1
1:7
351
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
214
2.1
1:7
152
2.1
1:7
170
2.1
1:7
86
I10 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.50
5.5
6.4
8.0
9.6
13.1
17
20
22
26
29
37
44
8.6
9.8
10.8
12.4
14.7
3.1
3.8
5.2
6.2
8.2
9.5
13.2
20
22
28
33
37
42
44
49
55
74
83
70
79
89
105
125
143
179
202
237
270
25
29
35
40
45
53
63
2188
2.4
2.8
3.1
3.7
4.1
5.3
6.3
1.2
1.4
1.5
1.8
2.1
0.8
0.9
1.1
1.4
1.9
0.4
0.5
0.7
0.9
1.2
1.4
1.9
6.9
7.8
10.6
11.9
2.8
3.1
3.9
4.7
5.3
6.0
6.2
18
20
26
29
9.9
11.3
12.7
14.9
34
39
3.6
4.1
5.0
5.7
6.4
7.5
9.0
312
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
T aI
[LB-IN]
27639
22771
16399
13700
10408
8992
6478
15567
13337
10638
8956
6549
10001
8735
7903
6903
5823
5142
4345
3903
3301
2982
2319
1938
4363
3894
3106
2620
2292
2053
1956
1761
1566
1151
1027
1230
1080
956
816
682
598
479
425
361
317
3363
2991
2451
2159
1912
1628
1363
39.1
2.1
2.6
2.7
3.5
3.7
4.0
3.7
1.2
1.3
1.5
1.7
2.0
1.3
1.6
2.0
2.4
3.2
1.3
1.6
1.9
2.7
3.6
3.6
3.6
1.2
1.6
2.1
2.4
2.8
3.1
2.9
3.6
4.0
3.6
3.7
No
Gearbox
3.9
4.0
3.6
3.7
2.9
3.3
3.7
3.8
3.9
4.0
1.1
1.2
1.4
1.6
1.9
2.2
2.6
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor f
BI
Ratio i ges
Type
706.53
582.18
419.22
350.22
266.11
229.93
165.63
397.98
341.02
271.87
228.91
167.32
255.55
223.21
202.06
176.49
148.81
131.42
111.17
99.85
84.47
76.18
59.38
49.61
86.00
76.53
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
111.47
99.63
79.49
66.93
58.70
52.42
49.94
45.05
40.07
29.42
26.27
SK 9053 - RV 20 - 143TC
SK 9043 - RV 20 - 143TC
SK 9032 - RV 20 - 143TC
SK 9022 - RV 20 - 143TC
SK 9012 - RV 20 - 143TC
SK - RV 20 F - 143TC
(460V)
I
N
[A]
I regel
[LBS]
3.0
1:7
527
3.0
1:7
157
3.0
1:7
174
3.0
1:7
90
3.0
1:7
355
3.0
1:7
218 www.nord.com
I11
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
6.4
8.0
9.6
13.1
81
94
111
131
40
47
56
65
14.1
20
24
26
30
33
140
163
192
5.2
6.2
8.2
9.5
11.0
12.8
15.0
18
22
25
91
106
121
143
173
204
258
61
72
77
82
37
44
46
53
10.8
12.4
17
20
22
26
29
28
33
37
42
11.5
13.4
16
19
5.8
6.7
7.9
9.3
20
23
27
2.0
2.9
3.4
3.7
4.2
4.7
0.9
1.1
1.4
1.9
1.6
1.8
2.2
2.6
3.1
3.5
0.7
0.9
1.2
1.4
8.7
10.2
11.0
11.8
5.3
6.3
6.5
7.6
1.5
1.8
2.4
2.8
3.1
3.7
4.1
13.0
15.0
17
20
25
29
37
3.9
4.7
5.3
6.0
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
T aI
[LB-IN]
17806
14195
11956
8735
8124
5664
4850
4390
3867
3487
2823
2416
2053
1743
1416
1212
1027
875
818
700
596
21886
18284
13895
12009
10399
8956
7531
6292
5213
4620
10549
9213
6859
5806
5213
4407
3974
3098
2593
2496
2151
1876
1593
1478
1389
1257
1080
938
797
662
560
443
4151
3496
3062
2735
8.0
8.5
8.5
8.9
6.9
7.7
8.5
7.3
2.6
3.4
4.4
4.8
5.5
6.1
8.0
8.5
8.9
1.2
1.5
1.8
2.4
3.6
4.0
4.2
5.9
5.8
7.7
1.5
2.0
2.7
3.1
4.7
5.2
5.0
5.2
3.7
4.4
4.6
4.5
1.1
1.2
1.5
2.0
2.0
2.6
2.9
5.0
5.0
5.1
5.2
5.0
5.2
4.8
1.5
1.8
2.1
2.3
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor f
BI
Ratio i ges
Type
341.02
271.87
228.91
167.32
155.52
108.44
92.92
84.04
74.08
66.71
54.15
46.35
39.32
33.44
27.14
23.23
19.71
16.76
15.66
13.40
11.40
419.22
350.22
266.11
229.93
199.13
171.48
144.22
120.48
99.81
88.50
202.06
176.49
131.42
111.17
99.85
84.47
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
79.49
66.93
58.70
52.42
SK 9053 - RV 30 - 145TC
SK 9052 - RV 30 - 145TC
SK 9043 - RV 30 - 145TC
SK 9042 - RV 30 - 145TC
SK 9032 - RV 30 - 145TC
SK 9022 - RV 30 - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
567
3.4
1:7
258
3.4
1:7
362
3.4
1:7
527
3.4
1:7
395
3.4
1:7
214
I12 www.nord.com
3.00
8.2
9.5
70
80
97
112
40
48
56
60
127
134
163
184
22
25
30
35
11.0
12.8
15.0
18
14.1
20
24
26
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
79
89
105
125
143
179
202
237
270
35
40
45
53
63
70
134
150
175
197
249
49
55
69
74
83
97
109
2188
11.3
12.7
14.9
18
20
26
29
34
39
5.0
5.7
6.4
7.5
9.0
9.9
19
21
25
28
36
6.9
7.8
9.9
10.6
11.9
13.8
16
312
1.2
1.4
18
19
23
26
9.9
11.4
13.8
16
5.7
6.9
8.0
8.6
3.1
3.5
4.3
5.0
1.6
1.8
2.2
2.6
2.0
2.9
3.4
3.7
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
20815
17992
4283
3531
3044
2841
2460
2151
1770
1522
15576
13417
11284
9425
7806
6921
5673
4903
1345
1274
1053
929
12169
8487
7266
6576
3275
2885
2558
2177
1814
1646
1443
1283
1089
912
799
639
566
482
422
2354
2089
1655
1540
1372
1177
1044
851
760
653
581
458
52.2
f
BI
1.8
2.1
5.9
6.2
6.8
6.8
6.2
6.8
6.8
5.6
6.7
6.2
6.8
6.7
3.9
5.2
5.6
5.9
2.4
2.6
2.8
3.9
1.7
2.3
2.9
3.2
No
Gearbox
2.5
2.8
2.8
3.4
3.5
2.8
3.0
3.3
3.4
1.1
1.2
1.4
1.6
2.0
2.2
4.1
4.3
4.5
4.7
4.9
2.7
3.1
3.9
4.1
4.3
4.5
4.7
Ratio i ges
Type
62.74
55.17
48.95
41.65
34.81
31.45
27.65
24.53
20.87
17.45
15.30
12.23
10.85
9.23
8.09
45.05
40.07
31.62
29.42
26.27
22.58
20.08
16.30
14.56
12.51
11.13
8.78
SK 9022 - RV 30 - 145TC
SK 9012 - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
214
3.4
1:7
196
3.4
1:7
130
266.11
229.93
SK 9053 - RV 30 - 145TC
199.13
171.48
144.22
120.48
99.81
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
155.52
108.44
92.92
84.04
SK 9052 - RV 30 - 145TC
SK 9042 - RV 30 - 145TC
4.8
1:7
567
4.8
1:7
527
4.8
1:7
362 www.nord.com
I13
5.00
8.2
9.5
112
127
134
163
184
60
70
80
97
35
40
48
56
11.0
12.8
15.0
18
22
25
30
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
3.00
72
77
82
91
44
46
53
61
20
22
26
29
37
106
121
143
173
204
258
94
111
131
140
163
192
30
33
40
47
56
65
81
2188
10.2
11.0
11.8
13.0
6.3
6.5
7.6
8.7
2.8
3.1
3.7
4.1
5.3
15.0
17
20
25
29
37
13.4
16
19
20
23
27
4.2
4.7
5.8
6.7
7.9
9.3
11.5
312
1.6
1.9
22
25
27
33
37
7.0
8.0
9.7
11.3
12.1
13.9
16
19
2.2
2.6
3.0
3.6
4.4
4.9
6.0
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
34621
29913
25904
22311
18762
15673
12983
11514
9434
8151
7124
5868
5053
4726
4089
3575
2947
2531
2239
2124
1752
1549
8700
7815
6611
5956
4646
3885
3744
3221
2814
2381
2221
2080
1876
1620
1407
1195
991
840
664
5797
5222
4239
3629
3080
2620
2124
1814
1540
1310
1221
1044
894
78.2
f
BI
1.1
1.2
3.4
3.6
3.7
4.1
3.6
3.7
4.1
4.1
1.4
1.6
1.7
2.4
2.3
3.1
3.4
4.1
4.0
3.7
4.1
4.0
No
Gearbox
3.5
3.4
3.5
3.4
2.9
3.1
3.0
3.1
1.3
1.4
1.7
1.9
2.5
3.4
3.4
3.5
3.4
3.5
3.2
5.7
5.7
5.9
5.4
5.7
5.9
3.7
4.1
4.6
5.1
5.7
4.9
5.3
Ratio i ges
Type
111.17
99.85
84.47
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
74.08
66.71
54.15
46.35
39.32
33.44
27.14
23.23
19.71
16.76
15.66
13.40
11.40
SK 9042 - RV 30 - 145TC
SK 9032 - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
4.8
1:7
362
4.8
1:7
258
4.8
1:7
130
266.11
229.93
SK 9053 - RV 40 - 184TC
199.13
171.48
144.22
120.48
99.81
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
SK 9052 - RV 40 - 184TC
7.6
1:5
644
7.6
1:5
604
I14 www.nord.com
7.50
12.8
15.0
18
70
80
97
112
127
134
163
184
40
48
56
60
22
25
30
35
24
26
30
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
5.00
91
106
121
143
61
72
77
82
29
37
44
46
53
173
204
258
111
131
140
163
56
65
81
94
192
20
24
26
30
33
40
47
2188
5.7
7.4
8.8
9.1
10.6
18
21
24
29
12.2
14.4
15
16
35
41
52
22
26
28
33
11.1
13.1
16
19
38
4.0
4.7
5.2
5.9
6.6
8.1
9.4
438
25
27
33
37
8.0
9.7
11.3
12.1
13.9
16
19
22
2.6
3.0
3.6
4.4
4.9
6.0
7.0
4.7
5.2
5.9
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
9912
7726
6452
6230
5363
4682
3965
3690
3452
3124
2690
2345
1982
1646
1398
1106
14107
12089
10930
9638
8682
7045
6027
5115
4354
3531
3018
2567
2177
2036
1743
1487
130
33542
28205
23568
19523
17311
14178
12257
10709
8823
7602
7107
6142
5372
4425
3814
3363
3195
2628
2328
18178
16434
14487 f
BI
No
Gearbox
2.9
2.9
2.9
3.1
1.9
2.2
2.9
2.6
1.2
1.5
1.8
1.8
1.8
2.9
3.1
3.2
3.4
3.6
3.2
3.4
3.4
2.9
3.2
3.4
3.6
1.4
1.8
1.9
2.2
2.4
2.8
3.1
2.4
2.5
2.7
2.7
2.5
2.7
2.7
2.3
2.7
2.5
2.7
2.7
1.1
1.1
1.6
1.5
2.1
2.3
2.4
1.2
1.3
1.5
Ratio i ges
Type
76.18
59.38
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
108.44
92.92
84.04
74.08
66.71
54.15
46.35
39.32
33.44
27.14
23.23
19.71
16.76
15.66
13.40
11.40
SK 9042 - RV 40 - 184TC
SK 9032 - RV 40 - 184TC
SK - RV 40 F - 184TC
(460V)
I
N
[A]
I regel
[LBS]
7.6
1:5
439
7.6
1:5
335
7.6
1:5
207
171.48
144.22
120.48
99.81
88.50
72.51
62.65
54.77
45.13
38.86
36.34
31.40
27.45
22.62
19.48
17.21
16.33
13.45
11.88
92.92
84.04
74.08
SK 9052 - RV 40 - 213 TC
SK 9042 - RV 40 - 213 TC
11
1:5
644
11
1:5
478 www.nord.com
I15
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
7.50
82
91
106
121
143
173
204
258
44
46
53
61
72
77
111
131
140
163
192
33
40
47
56
65
81
94
2188
29
35
41
52
16
18
21
24
8.8
9.1
10.6
12.2
14.4
15.0
22
26
28
33
38
6.6
8.1
9.4
11.1
13.1
16
19
438
VARIABLE SPEED HELICAL-BEVEL MOUNTED GEARED MOTORS
9700
9363
8062
7036
5956
5549
5195
4691
4036
3531
2982
2478
2097
1655
13045
10593
9062
7691
6540
5310
4540
3859
3275
3062
2620
2230
196
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
No
Gearbox
2.1
1.9
2.1
2.1
1.7
1.9
1.9
1.9
1.2
1.2
1.2
1.3
1.5
1.9
2.3
2.4
2.1
2.3
2.4
1.6
1.8
2.1
2.3
1.9
2.1
2.3
Ratio i ges
Type
49.61
47.87
41.21
35.99
30.45
28.37
26.55
23.99
20.65
18.04
15.26
12.68
10.73
8.48
66.71
54.15
46.35
39.32
33.44
27.14
23.23
19.71
16.76
15.66
13.40
11.40
SK 9042 - RV 40 - 213 TC
SK 9032 - RV 40 - 213 TC
SK - RV 40 F - 213TC
11
1:5
375
1:5
375
(460V)
I
N
[A]
I regel
[LBS]
11
1:5
478
11
1:5
247
I16 www.nord.com
VARIABLE SPEED MOTORS
FRICTION DRIVE UNITS
Type
Outline dimensions Motor Shaft dimensions
Fitting flange
SA2 N Z2 * KB Z1 Z Z3 Z4 HF1 H EC Rmax AB BDM FP L U UY V
SK RV10 - 56 C 160 S 3.62 1.22 17.17 -1.38 3.23 15.95 2.64 10.08 9.21 3.15
4.72 1.38 5.30
4.13 7.20 9.30 0.55
0.63 1.18
SK RV20 - 56 C
- 143 TC
- 56 C
- 143 TC
SK RV30 - 145 TC
- 145 TC
- 145 TC
SK RV40 - 184 TC
- 213 TC
160 S
250 S
160 S
250 S
300 S
250 S and
300 S
4.57 1.42 19.19
20.18
-0.89
-0.96
1.65 19.18
20.18
-0.89
-0.96
4.61 17.77
18.77
4.37 17.53
18.53
2.99 10.17
11.17
10.87 3.15
6.10 1.93 5.30
5.30
10.17
11.17
5.30
5.30
7.87 7.20
7.20
9.30
10.30
0.75
0.85 1.58
7.20
7.20
9.30
10.30
6.14 1.81 22.45
0 5.12 20.64 3.47 12.05 13.90 3.94
8.27 2.80 5.30
7.87 7.20 11.30 0.95
1.06 1.97
2.05 22.45
0 4.88 20.40
1.97 22.45
0 4.88 20.40
12.05
12.05
5.30
5.30
7.20 11.30
7.20 11.30
8.03 2.62 28.07
29.67
0
-0.55
6.14 25.45
27.05
4.21 15.10
16.70
17.56 4.92 10.63 3.66 5.90
7.40
9.84 8.50
10.30
14.00
15.60
1.10
1.22 2.36
*KB= negative values are beyond SA2
Fitting flange
160 S
250 S
300 S
AD2
5.12
7.87
9.84
SA3
3.15
4.65
5.98
SA4
2.48
3.94
4.92
Mounting dimensions
AK2 GA2
4.331
0.47
7.087
9.055
0.63
0.79
AJ2
5.12
8.47
10.43
BB2
0.14
0.16
0.16
BF2
0.35
0.55
0.55
Technical design may be subject to change www.nord.com
I17
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
WITH FRICTION DRIVE, FOOT MOUNTED, TRIPLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
A
AA
B
E
EB
F
FA
FB
FC
G
H
J
JA
JB
JC
BA
BC
C D
DB
DB1 DB2 EA HF N
O
QA
QB
R max
WG Z AB FP L U UY
Key
V
SK 9012
- RV 10 - 56 C 6.77
5.12
1.38
0.63
1.58
2.95 25.32 4.41
3.62
0.39
5.32
9.61
2.52
9.37
1.38
2.80 15.95 5.30
7.20
9.30 1.250 1.36
2.36
- RV 20 - 56 C
- RV 30 - 145 TC
SK 9022
6.50
5.12
1.46
0.43
1.38
5.59 27.14 0.39
4.57 -0.55
- 143 TC 5.51
4.72
0.59
1.77
1.10
28.14
30.01
6.14 -2.12
- RV 10 - 56 C
10.32 7.64
11.78
2.80
1.93
2.80
17.77 5.30
7.20
9.30
18.77 5.30
7.20 10.30
20.64 5.30
7.20 11.30
1/4 x 1/4 x 1-5/8
7.48
4.72
1.18
0.95
1.97
3.58 27.37 5.51
3.62
1.34
6.34 10.55 2.95 11.42 1.38
3.39 15.95 5.30
7.20
9.30 1.375 1.51
2.76
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
7.40
6.54
5.12
5.51
1.97
1.18
0.55
2.36
2.28
1.50
6.77 29.19 0.55
30.19
32.06
4.57
0.39
6.14 -1.18
11.26 9.29
12.72
3.94
1.93
2.80
17.77 5.30
7.20
9.30
18.77 5.30
7.20 10.30
20.64 5.30
7.20 11.30
5/16 x 5/16 x 2-1/8
SK 9032
- RV 20 - 56 C
- 143 TC
9.06
5.91
1.57
0.99
2.36
4.47 30.09 7.09
4.57
1.57
7.72 12.45 3.78 12.56 1.93
3.94 17.53 5.30
7.20
9.30 1.750 1.92
3.54
9.57
7.48
2.56
0.71
2.36
- RV 30 - 145 TC 7.68
6.50
0.79
2.76
1.77
7.99 31.09 0.94
32.96
6.14
0 13.91
11.61 4.41
2.80
18.53 5.30
20.40 5.30
7.20 10.30
7.20 11.30
- RV 40 - 184 TC
- 213 TC
38.01
39.61
8.03 -1.89
15.68
3.66
25.45 5.90
8.50 14.00
27.05 7.40 10.30 15.60
3/8 x 3/8 x 2-1/2
SK 9042
- RV 30 - 145 TC 10.23 7.09
2.17
1.26
2.76
5.91 35.32 8.35
6.14
0.79
9.45 14.69 4.92 14.92 2.80
4.53 20.40 5.30
7.20 11.30 2.375 2.65
4.72
- RV 40 - 184 TC 11.42 8.66
- 213 TC 8.66
7.09
3.03
1.18
0.87
3.15
2.76
1.97
9.84 40.37 1.42
41.97
8.03
1.10
16.46 13.66 5.20
3.66
25.45 5.90
8.50 14.00
27.05 7.40 10.30 15.60
5/8 x 5/8 x 3-1/4
SK 9052
- RV 30 - 145 TC 12.99 9.45
2.95
1.50
3.94
6.73 38.51 10.43 6.14
2.68 11.46 16.58 5.75 18.11 2.80
5.71 20.40 5.30
7.20 11.30 2.875 3.20
5.51
- RV 40 - 184 TC 14.17 11.02 3.35
- 213 TC 11.22 9.45
1.38
1.02
3.94
3.54 11.53 43.56 1.61
2.76
45.16
8.03
0.79
18.35 16.73 6.30
3.66
25.45 5.90
8.50 14.00
27.05 7.40 10.30 15.60
3/4 x 3/4 x 3-1/2
Technical design may be subject to change.
I18 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
WITH FRICTION DRIVE, FLANGE MOUNTED, TRIPLE REDUCTION
SK 9012 VF thru SK 9052 VF with AJ
£ 13.78 (4 holes)
SK 9052 VF with AJ = 15.75
(8 holes)
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
AJ
AK
BB
BD
BF
GA
AH BC C DB EA HF QA
QB
R max
SA SA1 SA2 WG Z AB FP L U UY V
Key
SK 9012 VF
- RV 10 - 56 C 6.50
0.14
0.43
0.87
5.67 25.75 0.39
5.32
9.61
9.80
1.38
4.41
3.62
0.39
2.68
15.95 5.30
7.20
9.30 1.250 1.36
2.36
- RV 20 - 56 C
- 145 TC
- RV 30 - 145 TC
5.118
7.87
0.47
27.57
29.57
30.44
10.32 3.23
1.93
4.57
-0.55
17.77 5.30
7.20
9.30
19.77 5.30
7.20
11.30
20.64 5.30
7.20
11.30
11.78
2.80
6.14
-2.13
1/4 x 1/4 x 2
SK 9022 VF
- RV 10 - 56 C
- RV 20 - 56 C
- 145 TC
- RV 30 - 145 TC
8.47
0.16
0.55
1.06
6.46 27.45 0.55
6.34 10.67 11.50 1.38
5.63
3.62
1.46
3.23
15.95 5.30
7.20
9.30 1.375 1.51
2.76
7.087
9.84
0.63
29.27
31.27
32.14
11.38 4.02
12.84
1.93
2.80
4.57
6.14
0.51
-1.06
17.77 5.30
7.20
9.30
19.77 5.30
7.20
11.30
20.64 5.30
7.20
11.30
5/16 x 5/16 x 2-1/4
SK 9032 VF
- RV 20 - 56 C 8.47
0.16
0.55
- 145 TC 7.087
9.84
0.63
1.81
7.87 30.64 0.94
32.64
7.72 12.45 13.11 1.93
4.96
7.09
4.57
1.57
3.82
17.53 5.30
19.53 5.30
7.20
7.20
9.30 1.750 1.92
11.30
3.54
- RV 30 - 145 TC or
- RV 40 - 182 TC 10.43
0.16
0.55
- 184 TC 9.055 11.81 0.79
- 213 TC
33.51
36.86
38.56
40.16
13.91
15.68
2.80
3.66
6.14
8.03
0
-1.89
20.40 5.30
7.20
11.30
23.75 5.90
8.50
12.30
25.45 5.90
8.50
14.00
27.05 7.40 10.30 15.60
3/8 x 3/8 x 2-3/4
SK 9042 VF
- RV 30 - 145 TC 11.81
0.20
0.71
2.95
9.84 36.19 1.42
9.45 14.88 15.79 2.80
8.54
6.14
0.98
4.25
20.40 5.30
7.20
11.30 2.375 2.65
4.72
- RV 40 - 182 TC 9.843 13.78 0.79
39.54
16.65 6.06
3.66
8.03
-0.91
23.75 5.90
8.50
12.30
- 184 TC 41.24
25.45 5.90
8.50
14.00
- 213 TC 42.84
27.05 7.40 10.30 15.60
5/8 x 5/8 x 3-1/4
SK 9052 VF 13.78
0.20
0.71
- RV 30 - 145 TC 11.811 15.75 0.79
3.50 11.42 39.49 1.61 11.42 16.47 19.09 2.80 10.32 6.14
2.56
5.55
20.40 5.30
7.20
11.30 2.875 3.20
5.51
- RV 40 - 182 TC or 42.84
18.24 7.28
3.66
8.03
0.67
23.75 5.90
8.50
12.30
- 184 TC 15.75
0.20
0.71
- 213 TC 13.780 17.72 0.87
44.54
46.14
25.45 5.90
8.50
14.00
27.05 7.40 10.30 15.60
3/4 x 3/4 x 3-1/2
Technical design may be subject to change.
www.nord.com
I19
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
WITH FRICTION DRIVE, SHAFT MOUNTED, TRIPLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
AJ
AK
AM
BB
BD
BF
BC C DB HF QA
QB
R max
SA SA1 SA2 WG Z AB FP L ADH
DH
LH
UH
Key
UYH
SK 9012 AZ
- RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
4.53
0.12
5.51
5.67
25.75
0.39
9.61
9.80
1.38
4.41
3.62
0.39
2.68
15.95
5.30
7.20
9.30
5.83
1.97
1.52
3.740
0.12
7xM8 27.57
28.57
30.44
10.32
11.78
3.23
1.93
2.80
4.57
6.14
-0.55
-2.13
17.77
5.30
7.20
9.30
1.97
1.375
18.77
5.30
7.20
10.30
20.64
5.30
7.20
11.30
5/16 x 5/16 x 4-1/4
- RV 30 - 145 TC
SK 9022 AZ
- RV 10 - 56 C 5.12
0.16
6.30
6.46
27.45
0.55
10.67
11.50
1.38
5.63
3.62
1.46
3.23
15.95
5.30
7.20
9.30
7.09
2.36
1.67
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
4.331
0.16
7xM8 29.27
30.27
32.14
11.38
12.84
4.02
1.93
2.80
4.57
6.14
0.51
-1.06
17.77
5.30
7.20
9.30
2.17
1.500
18.77
5.30
7.20
10.30
20.64
5.30
7.20
11.30
3/8 x 3/8 x 5
SK 9032 AZ
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
6.50
0.20
7.87
7.87
30.64
0.94
12.45
13.11
1.93
7.09
4.57
1.57
3.82
17.53
5.30
7.20
9.30
8.27
2.76
2.22
5.118
0.12
7xM10 31.64
33.51
13.91
4.96
2.80
6.14
0
18.53
5.30
7.20
10.30
20.40
5.30
7.20
11.30
2.76
2.000
- RV 40 - 184 TC 38.56
15.68
3.66
8.03
-1.89
25.45
5.90
8.50
14.00
- 213 TC 40.16
27.05
7.40
10.30
15.60
1/2 x 1/2 x 5-1/2
SK 9042 AZ
- RV 30 - 145 TC 8.47
0.20
9.84
9.84
36.19
1.42
14.88
15.79
2.80
8.54
6.14
0.98
4.25
20.40
5.30
7.20
11.30
9.45
3.15
2.55
- RV 40 - 184 TC
- 213 TC
7.087
0.28
7xM12 41.24
42.84
16.65
6.06
3.66
8.03
-0.91
25.45
5.90
8.50
14.00
3.15
2.375
27.05
7.40
10.30
15.60
5/8 x 7/16 x 6-1/2
SK 9052 AZ
- RV 30 - 145 TC 10.43
0.20
11.81
11.42 39.49
1.61
16.47
19.09
2.80
10.32
6.14
2.56
5.55
20.40
5.30
7.20
11.30
11.81
3.94
3.04
- RV 40 - 184 TC
- 213 TC
9.055
0.16
7xM12 44.54
46.14
18.24
7.28
3.66
8.03
0.67
25.45
5.90
8.50
14.00
3.94
2.750
27.05
7.40
10.30
15.60
5/8 x 5/8 x 8
Technical design may be subject to change.
I20 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
WITH FRICTION DRIVE, FOOT MOUNTED, QUADRUPLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
A
AA
B
E
EB
F
FA
FB
FC
G
H
J
JA
JB
JC
BA
BC
C D
DB
DB1 DB2 EA HF N
O
QA
QB
R max
WG
ZB
Z AB FP L U UY
Key
V
SK 9013
- RV 10 - 56 C 6.77
5.12
1.38
0.63
1.58
2.95 27.60 4.41
3.62
0.79
5.32
8.42
2.52
9.37
1.38
2.80 15.95 5.30
7.20
9.30 1.250 1.36
2.36
6.50
5.12
1.46
0.43
1.38
5.59
1.58
7.64
2.80
2.28
5.51
4.72
0.59
1.77
1.10
1/4 x 1/4 x 2
SK 9023
- RV 10 - 56 C 7.48
4.72
1.18
0.95
1.97
3.58 29.65 5.51
3.62 -0.16 6.34
9.37
2.95 11.42 1.38
3.39 15.95 5.30
7.20
9.30 1.375 1.51
2.76
7.40
5.12
1.97
0.55
2.28
6.54
5.51
1.18
2.36
1.50
6.77
1.73
9.29
3.94
2.28
5/16 x 5/16 x 2-1/4
SK 9033
- RV 10 - 56 C 9.06
5.91
1.57
0.99
2.36
4.47 30.87 7.09
3.62 -0.55 7.72
9.77
3.78 12.56 1.38
3.94 15.95 5.30
7.20
9.30 1.750 1.92
3.54
9.57
7.48
2.56
0.71
2.36
7.99
2.91
11.61 4.41
2.36
7.68
6.50
0.79
2.76
1.77
3/8 x 3/8 x 2-3/4
SK 9043
- RV 20 - 56 C 10.23 7.09
2.17
1.26
2.76
5.91 35.17 8.35
4.57
0.04
9.45 10.83 4.92 14.92 1.93
4.53 17.53 5.30
7.20
9.30 2.375 2.65
4.72
- 143 TC 11.42 8.66
- RV 30 - 145 TC 8.66
7.09
3.03
1.18
0.87
3.15
2.76
1.97
9.84 36.17 3.82
38.04
6.14
1.61
12.29
13.66 5.20
2.80
2.72 18.53 5.30
7.20 10.30
20.40 5.30
7.20 11.30
5/8 x 5/8 x 3-1/4
SK 9053
- RV 20 - 56 C 12.99 9.45
2.95
1.50
3.94
6.73 38.36 10.43 4.57
1.26 11.46 12.12 5.75 18.11 1.93
5.71 17.53 5.30
7.20
9.30 2.875 3.20
5.51
- 143 TC 14.17 11.02 3.35
1.02
3.54 11.53 39.36 4.61
16.73 6.30
2.72 18.53 5.30
7.20 10.30
- RV 30 - 145 TC 11.22 9.45
1.38
3.94
2.76
- RV 40 - 184 TC
41.23
46.28
6.14
8.03
0.31
2.20
13.58
15.35
2.80
3.66
20.40 5.30
7.20 11.30
25.45 5.90
8.50 14.00
3/4 x 3/4 x 3-1/2
Technical design may be subject to change.
www.nord.com
I21
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
WITH FRICTION DRIVE, FLANGE MOUNTED, QUADRUPLE REDUCTION
SK 9013 VF thru SK 9053 VF with AJ
£ 13.78 (4 holes)
SK 9053 VF with AJ = 15.75
(8 holes)
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
AJ
AK
BB
BD
BF
GA
AH BC C DB EA HF QA
QB
R max
SA SA1 SA2 WG
ZB
Z AB FP L U UY V
Key
SK 9013 VF
- RV 10 - 56 C 6.50
0.14
0.43
0.87
5.67 28.03 1.58
5.32
8.42
9.80
1.38
4.41
3.62
0.79
2.68
15.95 5.30
7.20
9.30 1.250 1.36
2.36
5.118
7.87
0.47
3.23
2.28
1/4 x 1/4 x 1-5/8
SK 9023 VF
- RV 10 - 56 C 8.47
0.16
0.55
1.06
6.46 29.73 1.73
6.34
8.49
11.50 1.38
5.63
3.62
-0.28 3.23
15.95 5.30
7.20
9.30 1.375 1.51
2.76
0.87
9.84
0.63
4.02
2.28
5/16 x 5/16 x 2-1/8
SK 9033 VF
- RV 10 - 56 C 8.47
0.16
0.55
1.81
7.87 31.42 2.91
7.72
9.77
13.11 1.38
7.09
3.62
-0.55 3.82
15.95 5.30
7.20
9.30 1.750 1.92
3.54
7.087
9.84
0.63
4.96
2.36
or
10.43
0.16
0.55
9.055 11.81 0.79
3/8 x 3/8 x 2-1/2
SK 9043 VF
- RV 20 - 56 C 11.81
0.20
0.71
2.95
9.84 36.04 3.82
9.45 11.02 15.79 1.93
8.54
4.57
-0.15 4.25
17.53 5.30
7.20
9.30 2.375 2.65
4.72
- 143 TC
- RV 30 - 145 TC
9.843 13.78 0.79
37.04
38.91
12.48
6.06
2.80
6.14
1.42
2.72
18.53 5.30
7.20
10.30
20.40 5.30
7.20
11.30
5/8 x 5/8 x 3-1/4
SK 9053 VF
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
13.78
0.20
0.71
11.811 15.75 0.79
3.50 11.42 39.34 4.61 11.42 12.01 19.09 1.93 10.32 4.57
-1.14 5.55
17.53 5.30
7.20
9.30 2.875 3.20
5.51
or
15.75
0.20
0.71
- RV 40 - 184 TC 13.780 17.72 0.87
40.34
42.21
47.26
13.47
15.24
7.28
2.80
3.66
6.14
8.03
0.43
2.32
2.72
18.53 5.30
20.40 5.30
25.45 5.90
7.20
7.20
8.50
10.30
11.30
14.00
3/4 x 3/4 x 3-1/2
Technical design may be subject to change.
I22 www.nord.com
VARIABLE SPEED HELICAL-BEVEL GEARED MOTORS
WITH FRICTION DRIVE, SHAFT MOUNTED, QUADRUPLE REDUCTION
Mounting dimensions Outline dimensions Motor Shaft dimensions
Type
AJ
AK
AM
BB
BD
BF
BC C DB HF QA
QB
R max
SA SA1 SA2 WG
ZB
Z AB FP L ADH
DH
LH
UH
Key
UYH
SK 9013 AZ
- RV 10 - 56 C 4.53
0.12
5.51
5.67
28.03
1.58
8.42
9.80
1.38
4.41
3.62
0.79
2.68
15.95
5.30
7.20
9.30
5.83
1.97
1.52
3.740
0.12
7xM8 3.23
2.28
1.97
1.375
5/16 x 5/16 x 4-1/4
SK 9023 AZ
- RV 10 - 56 C 5.12
0.16
6.30
6.46
27.73
1.73
8.49
11.50
1.38
5.63
3.62
-0.28
3.23
15.95
5.30
7.20
9.30
7.09
2.36
1.67
4.331
0.16
7xM8 4.02
2.28
2.17
1.500
3/8 x 3/8 x 5
SK 9033 AZ
- RV 10 - 56 C 6.50
0.20
7.87
7.87
31.42
2.91
9.77
13.11
1.38
7.09
3.62
-0.55
3.82
15.95
5.30
7.20
9.30
8.27
2.76
2.22
5.118
0.12
7xM10 4.96
2.36
2.76
2.000
1/2 x 1/2 x 5-1/2
SK 9043 AZ
- RV 20 - 56 C 8.47
0.20
9.84
9.84
36.04
3.82
11.02
15.79
1.93
8.54
4.57
-0.15
4.25
17.53
5.30
7.20
9.30
9.45
3.15
2.55
- 143 TC
- RV 30 - 145 TC
7.087
0.28
7xM12 37.04
38.91
12.48
6.06
2.80
6.14
1.42
2.72
18.53
5.30
7.20
10.30
3.15
2.375
20.40
5.30
7.20
11.30
5/8 x 7/16 x 6-1/2
SK 9053 AZ
- RV 20 - 56 C 10.43
0.20
11.81
11.42 39.34
4.61
12.01
19.09
1.93
10.32
4.57
-1.14
5.55
17.53
5.30
7.20
9.30
11.81
3.94
3.04
- 143 TC 9.055
0.16
7xM12 40.34
7.28
2.72
18.53
5.30
7.20
10.30
3.94
2.750
- RV 30 - 145 TC
- RV 40 - 184 TC
42.21
47.26
13.47
15.24
2.80
3.66
6.14
8.03
0.43
2.32
20.40
25.45
5.30
5.90
7.20
8.50
11.30
14.00
5/8 x 5/8 x 8
Technical design may be subject to change.
www.nord.com
I23
NOTES
I24 www.nord.com
VARIABLE SPEED WORM GEAR UNITS www.nord.com
J1
VARIABLE SPEED WORM GEAR UNITS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
GEAR TYPE
FOOT MOUNTED , SOLID SHAFT
SK 02040 - SK 42125 =
SK 13050 - SK 43125 =
Worm Gearboxes, double reduction
Worm Gearboxes, triple reduction
FLANGE MOUNTED , SOLID SHAFT, FLANGE B5
SK 02040 F - SK 42125 F =
SK 13050 F - SK 43125 F =
SHAFT MOUNTED , HOLLOW SHAFT
Worm Gearboxes, double reduction
Worm Gearboxes, triple reduction
SK 02040 A - SK 42125 A =
SK 13050 A - SK 43125 A =
WORM GEAR UNITS - OPTIONS see catalog 1000
Worm Gearboxes, double reduction
Worm Gearboxes, triple reduction
VARIABLE SPEED TYPE
RV 10
RV 20
RV 30
RV 40
Friction Drive Units
RV 10 B
RV 20 B
RV 30 B
RV 40 B
Friction Drive Units, corrosin resistant
FOOT MOUNTED, WITH SOLID SHAFT
Variable speed worm gear motor with friction drive variable speed
J2
SHAFT MOUNTED, WITH HOLLOW SHAFT
Variable speed worm gear motor with friction drive variable speed www.nord.com
VARIABLE SPEED WORM GEAR UNITS
WITH FRICTION DRIVE UNIT
NOMENCLATURE
SPEED CONTROLS
EMFST = Electromechanical remote control
MOTOR
C - face 0.25 - 7.50 HP
56 C - 213 TC
SPEED INDICATORS
FAA = EMFST with remote speed indicator, analog
Washdown Duty
MOTOR OPTIONS
115 / 230 V
Energy Efficient
Single Phase
Stainless Steel
230 / 460 V
575 V
50 or 60 Hz
FAD = EMFST with remote speed indicator, digital
EXAMPLE FOR ORDERING:
SK 32100 - RV 30 - 145 TC
C - face motor / three phase 1.50 HP
Variable speed gear type
Worm Gear Motor, double reduction www.nord.com
J3
VARIABLE SPEED WORM GEAR UNITS
MOUNTING POSITION
FOOT MOUNTED
B3 B3 I
B6 I B6 II
B8 I V5
FLANGE MOUNTED
V5 I
B6
B8
B5 B5 I B5 II
J4
Symbols: Vent plug
B 5 III
Drain plug
V1
Oil level
V3
Mounting surface www.nord.com
H1
H3
VARIABLE SPEED WORM GEAR UNITS
SHAFT MOUNTED
MOUNTING POSITION
H2
H4
POSITION OF TERMINAL BOX AND
CABLE ENTRY
Please specify position of terminal box and cable entry.
Normal design:
Terminal box at 3, cable entry at I or III only.
2
3
1
4
II
III
IV
I
Symbols:
Vent plug
H5
Drain plug Oil level
H6
In all mounting positions the variable speed drive may be mounted at an angle of 90 o or 180 o
.
(affix: ./1 = right, ./2 = left, ./3 = below)
B 5/2
Mounting surface
B 5
B 5/1
B 5/3 www.nord.com
J5
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.25
1.1
1.8
2.3
2.7
3.1
3.5
4.0
4.5
5.4
6.4
7.3
8.2
1.0
1.3
1.5
1.9
3.3
4.2
4.7
6.0
7.3
8.5
4.2
9.3
11.7
13.9
16
2.3
3.0
3.6
4.1
4.6
5.7
6.4
12.9
14.8
17
19
24
27
34
38
32
36
44
50
18
21
24
28
4.7
5.3
11.2
11.9
13.5
15.0
0.4
0.5
0.6
0.6
0.2
0.3
0.3
0.4
0.8
0.9
1.0
1.2
0.1
0.2
0.2
0.3
0.5
0.6
0.7
0.9
1.0
1.2
0.3
0.4
0.5
0.6
0.7
0.6
1.3
1.7
2.0
2.3
0.8
0.9
1.8
2.1
2.4
2.7
3.4
3.9
4.8
5.4
4.6
5.1
6.3
7.1
2.6
3.0
3.4
4.0
0.7
0.8
1.6
1.7
1.9
2.2
VARIABLE SPEED WORM GEARED MOTORS
T aI
[LB-IN]
5903
3434
2744
2310
2027
1805
1593
1416
1673
1407
1230
1097
6310
4797
4319
3443
1938
1558
1398
1097
912
1080
1522
703
573
492
432
2690
2115
1770
1558
1381
1151
1027
715
452
397
358
289
257
279
245
1363
1212
812
550
496
442
369
325
294
326
288
260
213
190
3.3
3.7
4.2
4.2
1.2
2.0
2.5
2.9
3.7
4.2
4.2
4.2
2.2
2.9
3.2
4.1
7.1
8.8
9.7
12.2
14.6
11.1
4.4
9.2
11.1
12.8
14.4
1.2
1.6
1.9
2.1
2.4
1.4
1.5
2.2
3.3
3.8
4.1
5.0
5.6
5.4
6.1
8.3
9.3
10.2
8.3
9.4
10.3
12.3
13.6
2.4
2.7
3.5
5.8
6.3
7.1
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor f
BI
Ratio i ges
Type
2200.07
1671.69
1507.71
1175.19
660.60
519.31
468.37
365.07
299.28
257.63
2058.82
1198.81
956.44
805.28
706.25
630.68
542.07
482.13
403.20
339.48
297.73
265.87
520.20
234.60
187.17
157.59
138.21
938.20
737.53
604.62
531.64
471.70
385.56
341.70
170.10
147.90
130.05
114.75
92.82
80.58
65.25
57.38
464.61
413.10
195.86
183.60
162.18
144.33
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
SK 33100 - RV 10 - 56C
SK 13080 - RV 10 - 56C
SK 12080 - RV 10 - 56C
SK 13063 - RV 10 - 56C
SK 12063 - RV 10 - 56C
SK 02050 - RV 10 - 56C 0.7
1:7
84
(460V)
I
N
[A]
I regel
[LBS]
0.7
1:7
190
0.7
1:7
126
1:7
104
0.7
1:7
0.7
1:7
115
0.7
93
J6 www.nord.com
0.33
4.7
6.0
7.3
8.5
12.0
1.0
1.3
1.5
1.9
3.3
4.2
1.8
2.3
2.7
3.1
3.5
4.0
4.2
9.3
11.7
13.9
16
18
21
23
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.25
52
59
68
77
100
112
128
32
42
47
49
19
22
25
29
146
165
215
248
291
330
430
497
43
53
62
71
80
91
2188
7.4
8.5
9.6
10.9
14.2
16
18
4.6
6.0
6.7
7.0
2.7
3.1
3.6
4.1
42
47
61
71
21
24
31
35
6.2
7.6
8.8
10.1
11.5
13.0
312
0.7
0.9
1.0
1.2
1.7
0.1
0.2
0.2
0.3
0.5
0.6
0.3
0.3
0.4
0.4
0.5
0.6
0.6
1.3
1.7
2.0
2.3
2.5
2.9
3.3
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
8496
6461
5823
4637
2611
2097
1894
1469
1230
1460
1053
4629
3690
3115
2726
2434
2142
2053
947
771
663
581
530
455
413
180
158
138
124
94.7
97.4
85.0
352
304
266
239
211
165
229
142
74.3
66.4
51.3
44.3
39.8
35.4
27.4
23.9
216
177
154
154
135
119
6.4
f
BI
7.2
9.1
10.8
8.2
11.2
1.7
2.2
2.4
3.0
5.3
6.5
1.5
1.8
2.2
2.5
2.8
3.1
3.3
6.8
8.2
9.5
10.7
11.6
13.3
14.4
4.4
5.0
5.6
6.2
7.9
8.9
10.1
3.7
4.7
3.9
5.3
2.3
2.7
3.0
3.3
11.3
12.5
15.9
18.0
12.7
14.0
17.4
19.6
6.9
8.2
9.4
8.6
9.7
10.9
No
Gearbox
Ratio i ges
Type
50.63
40.95
35.55
30.94
27.21
24.01
115.05
99.45
86.97
76.44
67.47
51.87
46.79
44.85
42.08
36.80
32.34
28.55
21.95
19.56
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
SK 02050 - RV 10 - 56C
SK 02040 - RV 10 - 56C
SK - RV 10 F - 56C 0.7
1:7
49
2200.07
1671.69
1507.71
1175.19
660.60
519.31
468.37
365.07
299.28
257.63
182.66
1198.81
956.44
805.28
706.25
630.68
542.07
520.20
234.60
187.17
157.59
138.21
123.42
106.08
94.35
SK 33100 - RV 10 - 56C
SK 13080 - RV 10 - 56C
SK 12080 - RV 10 - 56C
0.8
1:7
192
0.8
1:7
128
0.8
1:7
117
0.7
1:7
68
0.7
1:7
84
(460V)
I
N
[A]
I regel
[LBS] www.nord.com
J7
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.33
56
63
76
87
98
32
36
44
50
18
21
24
28
4.7
5.3
11.2
11.9
13.5
15.0
10.5
12.0
28
33
38
42
3.6
4.1
4.6
91
113
130
149
34
38
43
53
62
71
80
12.9
14.8
17
19
24
27
19
22
25
29
32
42
47
49
52
4.8
5.4
6.2
7.6
8.8
10.1
11.5
13.0
16
19
21
1.8
2.1
2.4
2.7
3.4
3.9
2.7
3.1
3.6
4.1
4.6
6.0
6.7
7.0
7.4
8.0
8.9
10.9
12.4
14.0
4.6
5.1
6.3
7.1
2.6
3.0
3.4
4.0
0.7
0.8
1.6
1.7
1.9
2.2
1.5
1.7
4.0
4.7
5.4
6.0
0.5
0.6
0.7
VARIABLE SPEED WORM GEARED MOTORS
375
330
291
239
207
207
182
965
610
536
482
390
346
161
132
114
100
474
410
358
321
284
223
309
193
242
1832
1628
1089
741
668
595
497
438
396
439
388
350
287
256
227
227
189
166
150
1186
1027
454
388
340
308
2390
2097
1859
8.1
9.7
11.0
12.4
4.0
4.5
5.1
6.1
7.0
6.4
7.2
1.6
2.5
2.8
3.1
3.7
4.2
1.7
2.0
2.2
2.5
2.8
3.5
2.9
3.9
3.3
6.9
7.6
9.2
10.1
6.2
6.9
7.6
6.2
1.8
2.0
2.6
4.3
4.7
5.3
11.3
10.2
12.1
13.6
14.9
1.3
1.5
12.6
14.6
16.4
16.9
1.4
1.6
1.8
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
Ratio i ges
Type
78.91
66.44
58.27
52.03
604.62
531.64
471.70
464.61
413.10
195.86
183.60
162.18
144.33
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
209.25
181.66
SK 12080 - RV 10 - 56C
SK 13063 - RV 10 - 56C
SK 12063 - RV 10 - 56C
SK 13050 - RV 10 - 56C
170.10
147.90
130.05
114.75
92.82
80.58
65.25
57.38
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
115.05
99.45
86.97
76.44
67.47
51.87
46.79
44.85
42.08
SK 02050 - RV 10 - 56C
SK 02040 - RV 10 - 56C 0.8
1:7
70
(460V)
I
N
[A]
I regel
[LBS]
0.8
1:7
117
0.8
1:7
106
0.8
1:7
95
0.8
1:7
97
0.8
1:7
86
J8 www.nord.com
1.2
1.4
1.6
1.6
1.7
1.9
2.2
2.6
3.0
0.9
1.0
1.2
1.7
2.2
0.2
0.2
0.3
0.5
0.6
0.7
0.4
0.4
0.5
0.6
4.7
5.4
6.0
7.0
2.5
2.9
3.3
4.0
0.6
1.3
1.7
2.0
2.3
0.50
8.6
9.8
11.0
11.2
11.9
13.5
15.0
18
21
6.0
7.3
8.5
12.0
15.0
1.3
1.5
1.9
3.3
4.2
4.7
2.7
3.1
3.5
4.0
33
38
42
49
18
21
23
28
4.2
9.3
11.7
13.9
16
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.33
165
215
248
291
330
430
497
59
68
77
100
112
128
146
2188
24
31
35
42
47
61
71
8.5
9.6
10.9
14.2
16
18
21
312
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
2124
1894
1682
1655
1124
1009
903
754
663
9788
8823
7036
3956
3177
2867
2230
1867
2213
1593
1239
4717
4133
3690
3248
3115
1434
1168
1009
881
803
690
626
688
588
515
467
402
88.5
69.0
60.2
54.0
47.8
36.3
31.9
212
186
166
128
131
114
101
8.6
f
BI
1.3
1.5
1.7
1.7
2.8
3.1
3.5
4.1
4.6
6.0
7.1
5.4
7.4
9.3
1.4
1.6
2.0
3.5
4.3
4.7
1.4
1.6
1.8
2.0
9.6
10.8
11.2
11.6
7.6
8.7
9.5
8.3
2.1
4.5
5.4
6.2
7.0
9.4
11.8
13.2
9.3
10.4
13.2
14.7
3.7
4.2
4.6
5.9
6.6
7.5
8.3
No
Gearbox
Ratio i ges
Type
36.80
32.34
28.55
21.95
19.56
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
SK 02040 - RV 10 - 56C
SK - RV 10 F - 56C
0.8
1:7
70
(460V)
I
N
[A]
I regel
[LBS]
0.8
1:7
51
1.1
1:7
192
1671.69
1507.71
1175.19
660.60
519.31
468.37
365.07
299.28
257.63
182.66
142.38
805.28
706.25
630.68
542.07
520.20
234.60
187.17
157.59
138.21
123.42
106.08
94.35
78.91
66.44
58.27
52.03
44.72
254.89
224.12
198.86
195.86
183.60
162.18
144.33
118.32
104.04
SK 33100 - RV 10 - 56C
SK 13080 - RV 10 - 56C
SK 12080 - RV 10 - 56C
SK 13063 - RV 10 - 56C
SK 12063 - RV 10 - 56C
1.1
1:7
106
1.1
1:7
95
1.1
1:7
128
1.1
1:7
117 www.nord.com
J9
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.50
68
77
100
112
128
146
165
32
42
47
49
52
59
215
248
291
330
430
497
80
91
113
130
43
53
62
71
149
14.8
17
19
24
27
34
38
2188
24
28
32
36
44
50
56
63
76
87
98
9.6
10.9
14.2
16
18
21
24
4.6
6.0
6.7
7.0
7.4
8.5
31
35
42
47
61
71
6.2
7.6
8.8
10.1
11.5
13.0
16
19
21
2.1
2.4
2.7
3.4
3.9
4.8
5.4
312
8.9
10.9
12.4
14.0
3.4
4.0
4.6
5.1
6.3
7.1
8.0
0.75
1.1
1.2
1.3
1.5
1.8
2.4
2.8
3.2
3.6
0.3
0.3
0.4
0.5
0.2
0.2
0.2
0.2
0.5
VARIABLE SPEED WORM GEARED MOTORS
T aI
[LB-IN]
282
252
194
198
173
152
135
430
337
469
292
366
320
104
90.3
82.3
72.6
55.8
48.7
442
362
314
314
276
243
200
173
151
920
812
732
592
524
569
500
13.0
600
665
587
530
435
388
344
345
287
252
227
No
Gearbox
2.8
3.1
3.9
4.4
4.9
5.5
6.2
1.8
2.3
1.9
2.6
2.2
2.5
7.8
8.8
6.1
6.8
8.6
9.6
4.7
5.3
6.4
7.2
3.4
4.0
4.6
4.2
8.2
1.6
1.8
2.0
2.5
2.8
2.6
3.0
5.0
4.1
4.6
5.0
6.0
6.7
7.5
6.7
8.0
8.9
9.8
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
18904
17098
15072
13576
11018
8717
7461
8903
7850 f
BI
2.5
3.1
3.6
2.2
1.4
1.6
1.8
2.0
2.3
Ratio i ges
Type
67.47
51.87
46.79
44.85
42.08
36.80
32.34
28.55
21.95
19.56
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
147.90
130.05
114.75
92.82
80.58
65.25
57.38
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
SK 12063 - RV 10 - 56C
SK 02050 - RV 10 - 56C
SK 02040 - RV 10 - 56C
SK - RV 10 F - 56C 1.1
1:7
51
2056.63
1860.07
1639.55
1476.55
1198.50
928.25
794.58
689.67
607.91
SK 43125 - RV 20 - 56 C 1.6
1:7
335
1.1
1:7
86
1.1
1:7
70
(460V)
I
N
[A]
I regel
[LBS]
1.1
1:7
106
J10 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
98
115
141
171
195
56
63
76
87
32
36
44
50
11.9
13.5
15.0
18
21
24
28
78
88
102
114
42
49
58
69
23
28
33
38
4.2
9.3
11.7
13.9
16
18
21
3.4
4.3
5.3
9.1
11.9
13.2
17
23
31
34
4.0
4.9
5.8
6.8
8.1
9.2
11.7
8.0
8.9
10.9
12.4
4.6
5.1
6.3
7.1
1.7
1.9
2.2
2.6
3.0
3.4
4.0
14.0
16
20
24
28
11.1
12.5
14.5
16
6.0
7.0
8.2
9.8
3.3
4.0
4.7
5.4
0.6
1.3
1.7
2.0
2.3
2.5
2.9
0.5
0.6
0.8
1.3
1.7
1.9
2.4
3.3
4.4
4.8
0.6
0.7
0.8
1.0
1.2
1.3
1.7
VARIABLE SPEED WORM GEARED MOTORS
T aI
[LB-IN]
882
797
654
583
518
519
431
379
1690
1522
1354
1133
1000
903
1000
341
289
256
210
184
938
1035
883
775
702
604
578
487
4682
2159
1761
1513
1328
1204
1035
433
386
336
299
5806
4691
3770
2319
1797
1620
1283
1274
982
884
7071
5735
4912
4177
3531
3098
2460
5.0
4.5
5.3
6.0
3.0
3.4
4.0
4.4
1.9
2.1
2.3
2.7
3.0
3.3
2.7
6.5
7.6
6.5
6.9
7.2
7.4
7.7
6.5
6.9
6.3
5.5
6.4
7.2
7.2
7.4
7.7
8.0
1.4
3.0
3.6
4.1
4.7
5.1
5.8
2.4
2.9
3.6
5.7
7.1
7.4
8.0
6.4
7.2
7.4
3.2
3.9
4.4
4.5
5.6
6.4
9.3
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor f
BI
Ratio i ges
Type
183.60
162.18
144.33
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
520.20
234.60
187.17
157.59
138.21
123.42
106.08
94.35
78.91
66.44
58.27
52.03
44.72
37.91
31.92
27.99
25.00
21.49
19.11
547.47
444.38
380.39
323.51
269.76
236.58
187.80
645.00
510.00
410.00
241.50
183.50
165.50
129.00
94.19
71.57
64.55
SK 43125 - RV 20 - 56 C
SK 32100 - RV 20 - 56 C
SK 12080 - RV 10 - 56C
SK 12063 - RV 10 - 56C
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
335
1.6
1:7
104
1.6
1:7
126
1.6
1:7
209 www.nord.com
J11
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
0.75
220
258
294
146
165
215
248
291
330
430
497
59
68
77
100
112
128
91
113
130
149
166
188
233
268
307
34
38
43
53
62
71
80
2188
31
37
42
42
47
61
71
21
24
31
35
8.5
9.6
10.9
14.2
16
18
24
27
33
38
13.0
16
19
21
44
4.8
5.4
6.2
7.6
8.8
10.1
11.5
312
1.00
3.2
3.6
4.0
4.9
5.8
6.8
8.1
9.2
11.7
1.3
1.5
1.8
2.4
2.8
3.4
4.3
5.3
9.1
11.9
13.2
0.8
1.0
1.2
1.3
0.5
0.5
0.6
0.7
1.7
0.2
0.2
0.3
0.3
0.4
0.5
0.6
0.8
1.3
1.7
1.9
VARIABLE SPEED WORM GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
165
141
124
229
203
158
136
123
109
83.2
73.5
482
424
380
292
298
261
366
300
260
227
217
191
155
135
119
855
752
664
544
473
472
415
19.6
20116
18116
14709
11629
9956
11886
10478
9434
7655
6558
5576
4717
4142
3283
7744
6257
5027
3089
2398
2159 f
BI
No
Gearbox
7.4
7.7
7.9
4.1
4.6
5.7
6.4
3.7
4.1
5.2
5.8
1.6
1.8
2.0
2.6
2.9
3.3
4.3
4.9
5.9
6.4
3.6
4.2
4.8
5.4
6.7
1.8
2.0
2.2
2.7
3.1
2.8
3.2
3.3
3.4
4.2
4.8
1.6
1.8
2.4
2.9
7.0
1.4
1.5
1.8
2.3
2.7
1.8
2.2
2.7
4.2
5.4
5.6
Ratio i ges
Type
9.96
8.47
7.43
36.80
32.34
28.55
21.95
19.56
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
65.25
57.38
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
SK 12063 - RV 10 - 56C
SK 02050 - RV 10 - 56C
SK 02040 - RV 10 - 56C
SK - RV 10 F - 56C
1.6
1:7
79
1.6
1:7
104
1.6
1:7
95
(460V)
I
N
[A]
I regel
[LBS]
1.6
1:7
60
2.1
1:7
335
1639.55
1476.55
1198.50
928.25
794.58
689.67
607.91
547.47
444.38
380.39
323.51
269.76
236.58
187.80
645.00
510.00
410.00
241.50
183.50
165.50
SK 43125 - RV 20 - 56C
SK 32100 - RV 20 - 56C 2.1
1:7
209
J12 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
87
98
115
141
50
56
63
76
18
21
24
28
32
36
44
171
195
220
258
294
113
130
149
166
188
233
268
307
43
53
62
71
80
91
17
23
31
34
78
88
102
114
137
156
175
42
49
58
69
23
28
33
38
9.3
11.7
13.9
16
18
21
24
28
31
37
42
7.1
8.0
8.9
10.9
12.4
14.0
16
20
2.6
3.0
3.4
4.0
4.6
5.1
6.3
27
33
38
44
16
19
21
24
6.2
7.6
8.8
10.1
11.5
13.0
6.0
7.0
8.2
9.8
3.3
4.0
4.7
5.4
1.3
1.7
2.0
2.3
2.5
2.9
11.1
12.5
14.5
16
20
22
25
2.4
3.3
4.4
4.8
VARIABLE SPEED WORM GEARED MOTORS
T aI
[LB-IN]
779
691
692
575
505
455
387
342
1513
1328
1204
1336
1177
1062
873
280
246
221
188
165
401
348
304
289
255
206
179
158
885
727
631
630
554
489
1717
1699
1310
1177
2876
2345
2018
1770
1611
1381
1257
1381
1177
1035
938
805
772
650
577
516
449
399
355
311
278
4.5
4.9
5.7
4.8
3.3
3.7
3.4
4.0
2.0
2.3
2.5
2.0
2.3
2.5
3.0
5.2
5.4
5.6
5.8
6.0
3.6
4.4
4.8
5.0
3.2
3.6
4.1
3.2
1.7
2.0
2.3
2.1
2.4
2.7
5.6
5.8
4.8
5.2
4.7
4.1
4.8
5.4
2.2
2.7
3.1
3.5
3.8
4.4
5.4
5.6
5.8
6.0
5.2
5.4
5.6
6.0
4.8
5.4
5.6
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor f
BI
Ratio i ges
Type
118.32
104.04
92.31
77.40
68.37
60.85
49.88
43.86
38.92
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
50.63
40.95
35.55
30.94
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
129.00
94.19
71.57
64.55
234.60
187.17
157.59
138.21
123.42
106.08
94.35
78.91
66.44
58.27
52.03
44.72
37.91
31.92
27.99
25.00
21.49
19.11
15.98
14.01
12.51
SK 32100 - RV 20 - 56C
SK 12080 - RV 20 - 56C
SK 12063 - RV 20 - 56C
SK 02050 - RV 20 - 56C
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
209
2.1
1:7
121
2.1
1:7
130
2.1
1:7
152 www.nord.com
J13
0.8
1.0
1.2
1.3
1.7
0.3
0.4
0.5
0.5
0.6
0.7
0.8
1.3
1.7
1.9
2.4
3.3
4.4
4.8
6.0
7.0
8.2
9.8
3.3
4.0
4.7
5.4
2.0
2.3
2.5
2.9
11.1
12.5
14.5
16
20
22
25
5.1
6.3
7.1
8.0
1.50
5.8
6.8
8.1
9.2
11.7
2.4
2.8
3.2
3.6
4.0
4.9
5.3
9.1
11.9
13.2
17
23
31
34
78
88
102
114
137
156
175
42
49
58
69
23
28
33
38
13.9
16
18
21
36
44
50
56
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.00
100
112
128
146
165
215
248
291
330
430
497
2188
42
47
61
71
14.2
16
18
21
24
31
35
312
VARIABLE SPEED WORM GEARED MOTORS
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN]
17426
14921
17806
15691
14133
11470
9824
8354
7071
6204
4921
7540
4629
3593
3239
2575
2540
1956
1770
3018
2646
2416
2071
1885
2071
1770
1549
1407
1204
1159
974
865
773
673
598
531
466
416
1593
1310
1168
1035
389
398
348
306
270
211
182
165
145
112
97.4
26.1
f
BI
2.2
2.3
2.8
3.2
4.6
1.5
1.8
1.1
1.2
1.6
1.9
1.8
2.8
3.6
3.7
4.0
3.2
3.6
3.7
3.7
3.9
3.2
3.5
3.2
2.8
3.2
3.6
2.1
2.3
2.5
2.9
3.6
3.7
3.9
4.0
3.5
3.6
3.7
1.7
2.0
2.2
2.5
No
Gearbox
1.9
2.2
2.5
2.7
3.1
3.9
4.4
3.1
3.4
4.3
4.8
Ratio i ges
Type
21.95
19.56
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
SK 02040 - RV 20 - 56C
SK - RV 20 F - 56C 2.1
1:7
86
928.25
794.58
689.67
607.91
547.47
444.38
380.39
323.51
269.76
236.58
187.80
410.00
241.50
183.50
165.50
129.00
94.19
71.57
64.55
157.59
138.21
123.42
106.08
94.35
78.91
66.44
58.27
52.03
44.72
37.91
31.92
27.99
25.00
21.49
19.11
15.98
14.01
12.51
60.85
49.88
43.86
38.92
SK 43125 - RV 20 - 143TC
SK 32100 - RV 20 - 143TC
SK 12080 - RV 20 - 143TC
3.0
1:7
340
3.0
1:7
214
157
SK 12063 - RV 20 - 143TC 3.0
1:7
135
(460V)
I
N
[A]
I regel
[LBS]
2.1
1:7
105
J14 www.nord.com
2.00
4.0
4.9
5.8
53
62
69
85
28
32
39
45
99
116
6.5
10.9
12.0
13.6
15.0
19
22
25
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
1.50
80
91
113
130
149
166
188
233
268
307
63
76
87
98
115
141
171
195
220
258
294
128
146
165
215
248
291
330
430
497
2188
11.5
13.0
16
19
21
24
27
33
38
44
28
31
37
42
8.9
10.9
12.4
14.0
16
20
24
18
21
24
31
35
42
47
61
71
312
0.6
0.7
0.8
7.6
8.8
9.8
12.1
4.1
4.5
5.5
6.5
14.1
17
2.2
2.7
3.1
3.6
0.9
1.5
1.7
1.9
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
830
733
600
521
455
433
382
309
268
237
1035
862
758
681
580
512
419
369
331
281
247
522
458
404
315
273
247
218
167
146
39.1
18868
15311
13107
2850
2567
2115
1832
1584
1496
1345
1106
956
815
8815
5478
5045
4452
4080
3434
2991
3195 f
BI
No
Gearbox
1.6
1.8
2.1
2.6
2.9
2.0
2.3
2.9
3.2
1.6
1.8
2.1
2.4
2.7
2.2
2.4
3.0
3.2
3.4
2.2
2.6
3.0
3.3
3.8
3.2
3.5
3.6
3.7
3.9
4.0
1.2
1.4
1.7
8.9
6.9
7.3
8.0
6.9
7.3
8.0
8.5
8.5
8.9
5.9
6.8
7.7
6.5
2.9
4.5
4.9
5.5
27.21
24.01
19.42
16.86
14.72
13.18
11.63
9.41
8.17
7.13
17.10
15.03
13.27
10.20
8.82
7.51
6.63
5.09
4.40
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
Ratio i ges
Type
SK 12063 - RV 20 - 143TC
(460V)
I
N
[A]
I regel
[LBS]
3.0
1:7
135
SK 02050 - RV 20 - 143TC
SK 02040 - RV 20 - 143TC 3.0
1:7
110
3.0
1:7
126
SK - RV 20 F - 143TC 3.0
1:7
90
547.47
444.38
380.39
337.46
201.63
182.36
160.74
144.76
117.50
100.58
87.30
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
18.80
SK 43125 - RV 30 - 145TC
SK 42125 - RV 30 - 145TC
379
3.4
1:7
342 www.nord.com
J15
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
2.00
137
169
198
233
78
88
102
114
42
49
58
69
21
23
28
33
38
137
156
175
204
229
290
107
115
128
164
204
240
57
64
73
90
31
34
43
51
9.1
11.9
13.2
17
21
23
115
141
171
195
63
76
87
98
220
258
294
2188
16
20
24
28
8.9
10.9
12.4
14.0
31
37
42
312
20
24
28
33
8.1
9.1
10.4
12.9
4.4
4.8
6.2
7.3
1.3
1.7
1.9
2.4
3.0
3.3
15.0
16
18
23
29
34
11.1
12.5
14.5
16
6.0
7.0
8.2
9.8
2.9
3.3
4.0
4.7
5.4
20
22
25
29
33
41
VARIABLE SPEED WORM GEARED MOTORS
T aI
[LB-IN]
1381
1151
1009
912
773
683
559
492
442
376
330
52.2
715
588
508
433
6177
4788
4319
3434
2876
3390
2620
2363
1867
1743
1575
1310
1239
1018
869
842
759
599
489
413
2770
2513
2761
2363
2071
1876
1611
1540
1301
1151
1035
894
798
709
622
555
482
429
339
No
Gearbox
2.8
2.5
3.0
3.3
1.7
2.0
2.2
2.4
3.7
4.2
4.6
4.4
5.2
4.8
5.0
4.2
4.4
4.8
4.2
2.1
2.7
2.9
3.6
4.2
3.4
5.2
4.2
4.4
4.8
5.0
5.2
7.3
8.0
8.5
8.9
4.0
4.2
4.4
4.6
2.9
3.4
3.2
3.7
2.2
2.4
2.1
2.4
2.7
3.8
4.0
4.2
4.4
4.6
4.8
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor f
BI
Ratio i ges
Type
15.92
12.93
11.06
9.41
241.50
183.50
165.50
129.00
104.00
94.19
71.57
64.55
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
13.34
10.75
9.10
106.08
94.35
78.91
66.44
58.27
52.03
44.72
37.91
31.92
27.99
25.00
21.49
19.11
15.98
14.01
12.51
10.75
9.56
7.55
34.89
28.61
25.15
22.32
18.99
15.57
12.76
11.22
9.96
8.47
7.43
SK 42125 - RV 30 - 145TC
SK 32100 - RV 30 - 145TC
SK 12080 - RV 30 - 145TC
SK 12063 - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
3.4
1:7
342
3.4
1:7
174
3.4
1.7
196
3.4
1:7
254
3.4
1:7
130
J16 www.nord.com
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
3.00
107
115
128
164
57
64
73
90
204
240
17
21
23
31
34
43
51
2188
85
99
116
137
169
198
233
45
53
62
69
25
28
32
39
6.5
10.9
12.0
13.6
15.0
19
22
8.1
9.1
10.4
12.9
15.0
16
18
23
29
34
2.4
3.0
3.3
4.4
4.8
6.2
7.3
312
6.5
7.6
8.8
9.8
3.6
4.1
4.5
5.5
0.90
1.5
1.7
1.9
2.2
2.7
3.1
12.1
14.1
17
20
24
28
33
5.00
13.6
15.0
19
22
45
53
62
69
25
28
32
39
85
99
9.1
10.7
12.4
13.8
17
20
5.0
5.7
6.3
7.8
2.7
3.0
3.7
4.4
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE
Output Torque
THREE PHASE
Service factor
T aI
[LB-IN]
2354
1956
1859
1522
1301
1266
1142
894
732
620
5151
4310
5089
3921
3531
2797
2611
78.2
13204
8204
7558
6664
6115
5151
4487
4779
4275
3850
3168
2752
2372
2239
2018
1655
1434
1221
1071
880
761
648
15054
13744
11461
9947
9425
8408
7576
6222
5390
4637
4133
3726
3062
2620 f
BI
No
Gearbox
3.5
2.8
2.9
3.2
2.9
3.5
3.2
3.4
3.4
3.5
2.4
2.8
2.2
2.8
2.9
3.2
2.8
5.7
5.9
4.6
4.9
4.3
4.6
4.9
5.3
2.0
3.0
3.3
3.7
3.9
4.6
5.1
5.3
5.7
5.9
4.9
5.3
5.7
5.9
2.2
2.3
2.8
2.9
3.2
3.4
1.6
1.7
1.8
2.0
1.1
1.1
1.2
1.3
Ratio i ges
Type
337.46
201.63
182.36
160.74
144.76
117.50
100.58
87.30
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
18.80
15.92
12.93
11.06
9.41
129.00
104.00
94.19
71.57
64.55
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
13.34
10.75
9.10
SK 42125 - RV 30 - 145TC
SK 32100 - RV 30 - 145TC
SK - RV 30 F - 145TC
(460V)
I
N
[A]
I regel
[LBS]
4.8
1:7
342
4.8
1:7
254
4.8
1:7
130
160.74
144.76
117.50
100.58
87.30
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
SK 42125 - RV 40 - 184 TC 7.6
1:5
419 www.nord.com
J17
7.50
28
116
137
169
198
233
62
69
85
99
32
39
45
53
73
90
107
115
128
164
204
240
304
2188
Power
P n
[HP]
Output speeds
High n
2
[RPM]
Low n
2
[RPM]
5.00
116
137
169
198
233
73
90
107
115
128
164
204
240
304
34
43
51
57
64
2188
23
28
34
40
47
6.8
8.7
10.2
11.3
12.8
26
33
41
48
14.5
18
21
23
61
438
33
41
48
61
14.5
18
21
23
26
5.7
6.3
7.8
9.1
10.7
23
28
34
40
12.4
13.8
17
20
47
438
VARIABLE SPEED WORM GEARED MOTORS
5186
4221
3575
3381
3044
2398
1938
1655
1310
12638
11381
9354
8098
6965
6222
5602
4593
3938
3345
2894
2354
2036
1726
196
2221
1929
1566
1354
1151
6885
5434
4850
4372
3797
3452
2814
2381
2248
2027
1593
1283
1097
870
130
Output Torque
WITH FRICTION DRIVE
THREE PHASE
Service factor
T aI
[LB-IN] f
BI
No
Gearbox
2.2
2.6
2.9
3.1
1.7
1.9
2.1
2.1
3.2
1.1
1.2
1.4
1.5
1.5
3.6
2.9
3.2
3.4
3.6
No
Gearbox
1.1
1.3
1.4
1.4
1.5
1.7
1.9
2.1
2.1
2.4
1.9
2.1
2.3
1.8
1.9
2.1
2.3
2.4
1.1
1.2
1.3
1.4
1.5
Ratio Type (460V) i ges
I
N
[A]
I regel
[LBS]
18.80
15.92
12.93
11.06
9.41
64.55
50.31
42.83
38.63
34.32
30.11
24.27
20.54
18.97
17.11
13.34
10.75
9.10
7.19
SK 42125 - RV 40 - 184 TC 7.6
1:5
419
SK 32100 - RV 40 - 184 TC 7.6
1:5
331
SK - RV 40 F - 184TC 7.6
1:5
207
30.11
24.27
20.54
18.97
17.11
13.34
10.75
9.10
7.19
76.95
69.30
56.25
48.15
40.95
35.33
31.82
25.83
22.11
18.80
15.92
12.93
11.06
9.41
SK 42125 - RV 40 - 213 TC 11
1:5
459
SK 32100 - RV 40 - 213 TC 11
1:5
370
SK - RV 40 F - 213TC 11
1:5
247
J18 www.nord.com
VARIABLE SPEED MOTORS
FRICTION DRIVE UNITS
Type
Outline dimensions Motor Shaft dimensions
Fitting flange
SA2 N Z2 * KB Z1 Z Z3 Z4 HF1 H EC Rmax AB BDM FP L U UY V
SK RV10 - 56 C 160 S 3.62 1.22 17.17 -1.38 3.23 15.95 2.64 10.08 9.21 3.15
4.72 1.38 5.30
4.13 7.20 9.30 0.55
0.63 1.18
SK RV20 - 56 C
- 143 TC
- 56 C
- 143 TC
SK RV30 - 145 TC
- 145 TC
- 145 TC
SK RV40 - 184 TC
- 213 TC
160 S
250 S
160 S
250 S
300 S
250 S and
300 S
4.57 1.42 19.19
20.19
-0.89
-0.96
4.61 17.77
18.77
2.99 10.17
11.17
10.87 3.15
6.10 1.93 5.30
5.30
1.65 19.18
20.18
-0.89
-0.96
4.37 17.53
18.53
10.17
11.17
5.30
5.30
7.87 7.20
7.20
9.30
10.30
0.75
0.85 1.58
7.20
7.20
9.30
10.30
6.14 1.81 22.45
0 5.12 20.64 3.47 12.05 13.90 3.94
8.27 2.80 5.30
7.87 7.20 11.30 0.95
1.06 1.97
2.05 22.45
0 4.88 20.40
12.05
5.30
7.20 11.30
1.97 22.45
0 4.88 20.40
12.05
5.30
7.20 11.30
8.03 2.62 28.07
29.67
0
-0.55
6.14 25.45
27.05
4.21 15.10
17.56 4.92 10.63 3.66 5.90
16.70
7.40
9.84 8.50
14.00
10.30
15.60
1.10
1.22 2.36
*KB= negative values are beyond SA2
Fitting flange
160 S
250 S
300 S
AD2
5.12
7.87
9.84
SA3
3.15
4.65
5.98
SA4
2.48
3.94
4.92
Mounting dimensions
AK2 GA2
4.331
0.47
7.087
9.055
0.63
0.79
AJ2
5.12
8.47
10.43
BB2
0.14
0.16
0.16
BF2
0.35
0.55
0.55
Technical design may be subject to change www.nord.com
J19
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, FOOT MOUNTED, FLANGE MOUNTED OR SHAFT MOUNTED,
DOUBLE REDUCTION
Example: SK 02040 - RV 10 - 56 C
Example: SK 02040 F - RV 10 - 56 C
Example: SK 02040 A - RV 10 - 56 C
Type
Mounting dimensions foot
A
B
B1
E
F
F1
FA
FB
FC
G
H
J
J1
J2
Mounting dim. flange
AJ*
AJ2
AK*
BB*
BD*
BD2
BD3
BF*
BF2
GA* A1
AD1
ADH
AH1
BA
C D
DB
EF
EH
Outline dimensions
HF HF1 N
O
QA
QB
R max
SA SA1 X Z
SK 02040 ...
- RV 10 - 56 C
- RV 20 - 56 C
4.33 3.54 1.10 0.39 0.79
3.41 2.48 1.57 0.35 1.06
- 143 TC 3.94 3.15 0.90
0.94
3.94
2.95
3.150
0.12 2.91 0.32 4.72 1.57 22.60 3.15 2.24 8.72 8.80 1.69 6.65 1.38 3.23 3.62 0.12 15.95
4.72 0.26
3.54
M6x10
4.53 2.16 24.42 0.02 2.36 9.43 9.51 5.36 2.48 1.93
4.72
25.42
4.57
17.77
18.77
Shaft dimensions
Solid shaft Hollow shaft Type
U UY V Key ADH DH LH UH UYH Key 56 C
0.750
0.83
1.57
3/16x3/16x1
4.72
1.38
1.10
0.750
0.84
3/16x3/16x1 143 TC
Motor dimensions
AB FP L AJ AK
* Alternate flange
BB BD BF GA
5.30
7.20
9.30
5.12
4.331
0.14
6.30
0.35
0.36
5.30
7.20
10.30
Technical design may be subject to change
J20 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, FOOT MOUNTED, DOUBLE REDUCTION
Mounting dimensions foot Outline dimensions Motor Shaft dimensions
Type
A
B
B1
BE
E
EB
F
G
G1
H
J
J1
J2 AD BA C D
DB
DB1 HF N
O
QA
QB
R max
Z AB FP L U UY
Key
V
SK 02050
- RV 10 - 56 C
- RV 20 - 56 C
4.80
1.38
3.15
0.43
1.34
4.68
2.71 23.23 3.94
3.62
9.23
2.28
7.28
1.38
15.95 5.30
7.20
9.30 1.000 1.11
2.12
4.72
3.94
0.55
1.38
- 143 TC 4.49
1.38
0.55
1.38
25.05 0.30
26.05
4.57
9.94
6.50
2.95
1.93
17.77 5.30
7.20
9.30
18.77 5.30
7.20 10.30
1/4 x 1/4 x 1-5/8
SK 12063
- RV 10 - 56 C
- RV 20 - 56 C
5.43
1.38
3.94
0.43
1.42
5.66
3.50 23.82 4.41
3.62
9.49
2.95
7.87
1.38
15.95 5.30
7.20
9.30 1.250 1.36
2.75
5.51
4.33
0.63
1.58
25.64 0.51
4.57 10.20 7.40
3.15
1.93
17.77 5.30
7.20
9.30
- 143 TC 5.51
- RV 30 - 145 TC
SK 12080
1.77
0.63
1.58
26.64
28.51
6.14 11.66
18.77 5.30
7.20 10.30
2.80
20.64 5.30
7.20 11.30
1/4 x 1/4 x 2-1/4
- RV 10 - 56 C
- RV 20 - 56 C
6.30
1.58
5.12
0.55
1.58
6.30
3.74 25.44 5.51
3.62 10.35 2.99
9.49
1.38
15.95 5.30
7.20
9.30 1.375 1.51
2.75
7.01
5.12
0.79
1.58
27.26 0.75
4.57 11.06 8.98
3.94
1.93
17.77 5.30
7.20
9.30
- 143 TC 6.69
- RV 30 - 145 TC
2.36
0.79
1.58
28.26
30.13
6.14 12.52
18.77 5.30
7.20 10.30
2.80
20.64 5.30
7.20 11.30
5/16 x 5/16 x 2-1/8
SK 32100
- RV 20 - 56 C 7.48
2.76
5.32
0.71
- 143 TC 7.28
5.91
1.10
1.97
1.97
7.63
4.68 28.87 7.09
29.87 0.95
4.57 12.44 3.70 11.34 1.93
11.38 4.92
17.53 5.30
18.53 5.30
7.20
9.30 1.875 2.09
7.20 10.30
3.50
- RV 30 - 145 TC 7.21
2.95
0.98
1.89
- RV 40 - 184 TC
- 213 TC
31.74
36.79
38.39
6.14 13.90
8.03 15.67
2.80
20.40 5.30
7.20 11.30
3.66
25.45 5.90
8.50 14.00
27.05 7.40 10.30 15.60
1/2 x 1/2 x 2-3/4
SK 42125
- RV 30 - 145 TC 9.84
3.23
7.09
0.87
2.36
9.81
5.88 34.26 8.86
6.14 15.08 4.82 13.86 2.80
20.40 5.30
7.20 11.30 2.375 2.65
4.50
- RV 40 - 184 TC 9.53
- 213 TC 9.45
7.87
3.62
1.34
1.18
2.75
2.36
39.31 1.54
8.03 16.85 13.90 5.91
3.66
25.45 5.90
8.50 14.00
40.91
27.05 7.40 10.30 15.60
5/8 x 5/8 x 3-1/2
Technical design may be subject to change www.nord.com
J21
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, FLANGE MOUNTED, DOUBLE REDUCTION
Mounting dimensions flange Outline dimensions Motor Shaft dimensions
Type
AJ AK BB BD BF GA AD1 C DB DB1 HF O QA
QB
R max
SA Z AB FP L U UY V
AJ1 AK1 BB1 BD1 BF1 AH1 Key
SK 02050 F
- RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
SK 12063 F
5.12
4.53
4.331 0.16
3.740 0.12
6.30
5.20
0.35 0.39
M8x13
5.47 23.04 0.30 3.62
2.12 24.86
25.86
4.57
9.23
9.94
6.93
7.09
2.76
1.38 3.94 15.95 5.30
1.93
17.77 5.30
7.20
7.20
9.30
9.30
1.000 1.11
2.12
18.77 5.30
7.20
10.30
1/4 x 1/4 x 1-5/8
- RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
SK 12080 F
- RV 10 - 56 C
- RV 20 - 56 C
6.50
5.118 0.16
7.87
0.43 0.47
6.53 23.67 0.51 3.62
9.84
7.84
7.72
1.38 4.76 15.95 5.30
7.20
9.30
1.250 1.36
2.75
4.53
3.740 0.12
5.51
M8x13 2.75 25.49
26.49
28.36
4.57 10.55
6.14 12.01
2.95
1.93
2.80
17.77 5.30
7.20
9.30
18.77 5.30
7.20
10.30
20.64 5.30
7.20
11.30
1/4 x 1/4 x 2-1/4
6.50
5.118 0.16
7.87
0.43 0.47
7.24 25.48 0.75 3.62 10.59 9.88
9.53
1.38 5.75 15.95 5.30
7.20
9.30
1.375 1.51
2.75
6.50
5.118 0.16
7.56
M10x16 2.75 27.30
4.57 11.30
3.98
1.93
17.77 5.30
7.20
9.30
- 143 TC
- RV 30 - 145 TC
28.30
30.17
6.14 12.76
2.80
18.77 5.30
7.20
10.30
20.64 5.30
7.20
11.30
5/16 x 5/16 x 2-1/8
SK 32100 F
- RV 20 - 56 C 8.47
7.087 0.16
9.84
0.55 0.63
9.09 28.75 0.95 4.57 12.52 12.24 11.22 1.93 7.17 17.53 5.30
- 143 TC 8.47
7.087 0.16
9.37
M12x20 3.50 29.75
4.80
18.53 5.30
7.20
7.20
9.30
10.30
1.875 2.09
3.50
- RV 30 - 145 TC
- RV 40 - 184 TC
- 213 TC
31.62
36.67
38.27
6.14 13.98
8.03 15.75
2.80
3.66
20.40 5.30
7.20
11.30
25.45 5.90
8.50
14.00
27.05 7.40 10.30 15.60
1/2 x 1/2 x 2-3/4
SK 42125 F
- RV 30 - 145 TC 11.81 9.843 0.20 13.78 0.71 0.79 11.86 34.26 1.54 6.14 14.96 15.08 13.86 2.80 8.74 20.40 5.30
7.20
11.30 2.375 2.65
4.50
- RV 40 - 184 TC 10.43 9.055 0.16 11.42
- 213 TC
M12x20 4.50 39.31
40.91
8.03 16.73
5.91
3.66
25.45 5.90
8.50
14.00
27.05 7.40 10.30 15.60
5/8 x 5/8 x 3-1/2
Technical design may be subject to change
J22 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, SHAFT MOUNTED, DOUBLE REDUCTION
Type
Mounting dimensions flange
AJ1
AK1
BD1
BF1
EC
ED
ADH C DB DB1
Outline dimensions
EH HF O QA
QB
R max
SA
X
Z AB
Motor
FP L
Shaft dimensions
ADH
DH
LH
UH
Key
UYH
SK 02050 A
- RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
SK 12063 A
4.53
0.12
0.24
5.20 23.04 0.30
3.62
2.60
9.23
6.93
7.09
1.38
3.94
15.95 5.30
7.20
9.30
5.20
1.77
1.30
3.740 M8x13 0.12
24.86
25.86
4.57
9.94
2.76
1.93
0.12
17.77 5.30
7.20
9.30
1.77 1.188
18.77 5.30
7.20 10.30
1/4 x 1/4 x 3-1/4
- RV 10 - 56 C
- RV 20 - 56 C
- 143 TC
- RV 30 - 145 TC
SK 12080 A
- RV 10 - 56 C
- RV 20 - 56 C
4.53
5.51
0.28
5.83 23.67 0.51
3.62
2.92
9.84
7.84
7.72
1.38
4.76
15.95 5.30
7.20
9.30
5.83
1.90
1.54
3.740 M8x13 0.12
25.49
26.49
28.36
4.57
6.14
10.55
12.01
2.95
1.93
2.80
0.16
17.77 5.30
18.77 5.30
20.64 5.30
7.20
9.30
7.20 10.30
7.20 11.30
1.97 1.438
3/8 x 1/4 x 4
6.50
7.56
0.35
6.61 25.48 0.75
3.62
3.31
10.59 9.88
9.53
1.38
5.75
15.95 5.30
7.20
9.30
6.61
2.17
1.90
5.118 M10x16 0.16
27.30
4.57
11.30
3.98
1.93
0.20
17.77 5.30
7.20
9.30
2.56 1.813
- 143 TC
- RV 30 - 145 TC
28.30
30.17
6.14
12.76
2.80
18.77 5.30
7.20 10.30
20.64 5.30
7.20 11.30
1/2 x 3/8 x 5-1/4
SK 32100 A
- RV 20 - 56 C 8.47
9.37
0.35
- 143 TC 7.087 M12x20 0.16
7.95 28.75 0.95
29.75
4.57
3.98
12.52 12.24 11.22 1.93
4.80
7.17
0.20
17.53 5.30
18.53 5.30
7.20
9.30
7.20 10.30
7.95
2.76
3.35 2.438
2.62
- RV 30 - 145 TC
- RV 40 - 184 TC
- 213 TC
31.62
36.67
38.27
6.14
8.03
13.98
15.75
2.80
3.66
20.40 5.30
7.20 11.30
25.45 5.90
8.50 14.00
27.05 7.40
10.30 15.60
5/8 x 7/16 x 5-1/2
SK 42125 A
- RV 30 - 145 TC 10.43
11.42
0.39
9.84 34.26 1.54
6.14
4.92
14.96 15.08 13.86 2.80
8.74
20.40 5.30
7.20 11.30
9.84
3.35
3.03
- RV 40 - 184 TC 9.055 M12x20 0.16
- 213 TC
39.31
40.91
8.03
16.73
5.91
3.66
0.24
25.45 5.90
8.50 14.00
3.74 2.750
27.05 7.40
10.30 15.60
5/8 x 5/8 x 8
Technical design may be subject to change www.nord.com
J23
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, FOOT MOUNTED, TRIPLE REDUCTION
Mounting dimensions foot Outline dimensions Motor Shaft dimensions
Type
A
B
B1
BE
E
EB
F
G
G1
H
J
J1
J2 AD BA C D
DB
DB1 HF N
O
QA
QB
ZB
R max
ZB Z AB FP L U UY
Key
V
SK 13050
- RV 10 - 56 C 4.80
1.38 3.15
0.43
1.34
4.68 2.71 25.51 3.94
3.62
8.05
2.28
7.28
1.38
2.28 15.95 5.30 7.20
9.30 1.000 1.11 2.12
4.72
3.94 0.55
1.38
4.49
1.38 0.55
1.38
1.48
6.50
2.95
2.28
1/4 x 1/4 x 1-5/8
SK 13063
- RV 10 - 56 C 5.43
1.38 3.94
0.43
1.42
5.66 3.50 26.10 4.41
3.62
8.31
2.95
7.87
1.38
2.28 15.95 5.30 7.20
9.30 1.250 1.36 2.75
5.51
4.33 0.63
1.58
5.51
1.77 0.63
1.58
1.69
7.40
3.15
2.28
1/4 x 1/4 x 2-1/4
SK 13080
- RV 10 - 56 C 6.30
1.58 5.12
0.55
1.58
6.30 3.74 27.63 5.51
3.62
9.17
2.99
9.49
1.38
2.28 15.95 5.30 7.20
9.30 1.375 1.51 2.75
7.01
5.12 0.79
1.58
6.69
2.36 0.79
1.58
1.93
8.98
3.94
2.28
5/16 x 5/16 x 2-1/8
SK 33100
- RV 10 - 56 C 7.48
2.76 5.32
0.71
1.97
7.63 4.68 29.65 7.09
3.62
9.77
3.70 11.34 1.38
2.36 15.95 5.30 7.20
9.30 1.875 2.09 3.50
7.28
5.91 1.10
1.97
7.21
2.95 0.98
1.89
2.91
11.38 4.92
2.36
1/2 x 1/2 x 2-3/4
SK 43125
- RV 20 - 56 C 9.84
3.23 7.09
0.87
2.36
9.81 5.88 34.11 8.86
4.57 11.22 4.82 13.86 1.93
2.72 17.53 5.30 7.20
9.30 2.375 2.65 4.50
- 143 TC 9.53
7.87 1.34
2.75
35.11 3.94
13.90 5.91
18.53 5.30 7.20 10.30
- RV 30 - 145 TC 9.45
3.62 1.18
2.36
36.98
6.14 12.68
2.72
2.80
20.40 5.30 7.20 11.30
5/8 x 5/8 x 3-1/2
Technical design may be subject to change
J24 www.nord.com
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, FLANGE MOUNTED, TRIPLE REDUCTION
Mounting dimensions flange Outline dimensions Motor Shaft dimensions
Type
AJ
AJ1
AK BB BD BF
AK1 BB1 BD1 BF1
GA AD1
AH1
C DB DB1 HF O QA
QB
R max
SA ZB Z AB FP L U UY
Key
V
SK 13050 F
- RV 10 - 56 C 5.12 4.331 0.16 6.30
0.35 0.39 5.47 25.32 1.48 3.62
8.05
6.93
7.09 1.38 3.94 2.28 15.95 5.30 7.20 9.30 1.000 1.11 2.12
4.53 3.740 0.12 5.20
M8x13 2.12
2.76
1/4 x 1/4 x 1-5/8
SK 13063 F
- RV 10 - 56 C 6.50 5.118 0.16 7.87
0.43 0.47 6.53 25.95 1.69 3.62
8.66
7.84
7.72 1.38 4.76 2.28 15.95 5.30 7.20 9.30 1.250 1.36 2.75
4.53 3.740 0.12 5.51
M8x13 2.75
2.95
1/4 x 1/4 x 2-1/4
SK 13080 F
- RV 10 - 56 C 6.50 5.118 0.16 7.87
0.43 0.47 7.24 27.76 1.93 3.62
9.41
9.88
9.53 1.38 5.75 2.28 15.95 5.30 7.20 9.30 1.375 1.51 2.75
6.50 5.118 0.16 7.56
M10x16 2.75
3.98
5/16 x 5/16 x
2-1/8
SK 33100 F
- RV 10 - 56 C 8.47 7.087 0.16 9.84
0.55 0.63 9.09 29.53 2.91 3.62
9.85 12.24 11.22 1.38 7.17 2.36 15.95 5.30 7.20 9.30 1.875 2.09 3.50
8.47 7.087 0.16 9.37
M12x20 3.50
4.80
1/2 x 1/2 x 2-3/4
SK 43125 F
- RV 20 - 56 C 11.81 9.843 0.20 13.78 0.71 0.79 11.86 34.11 3.94 4.57 11.10 15.08 13.86 1.93 8.74 2.72 17.53 5.30 7.20 9.30 2.375 2.65 4.50
- 143 TC 10.43 9.055 0.16 11.42
- RV 30 - 145 TC
M12x20 4.50 35.11
36.98
6.14 12.56
5.91
2.80
18.53 5.30 7.20 10.30
20.40 5.30 7.20 11.30
5/8 x 5/8 x 3-1/2
Technical design may be subject to change www.nord.com
J25
VARIABLE SPEED WORM GEARED MOTORS
WITH FRICTION DRIVE, SHAFT MOUNTED, TRIPLE REDUCTION
Type
Mounting dimensions flange
AJ1
AK1
BD1
BF1
EC
ED
ADH C DB
Outline dimensions
DB1 EH HF O QA
QB
R max
SA
X
ZB Z AB
Motor
FP L
Shaft dimensions
ADH
DH
LH
UH
Key
UYH
SK 13050 A
- RV 10 - 56 C 4.53
0.12
0.24
5.20 25.32 1.48
3.62
2.60
8.05
6.93
7.09
1.38
3.94
2.28 15.95 5.30
7.20
9.30
5.20
1.77
1.30
3.740 M8x13 0.12
2.76
0.12
1.77 1.188
1/4 x 1/4 x 3-1/4
SK 13063 A
- RV 10 - 56 C 4.53
5.51
0.28
5.83 25.95 1.69
3.62
2.92
8.66
7.84
7.72
1.38
4.76
2.28 15.95 5.30
7.20
9.30
5.83
1.90
1.54
3.740 M8x13 0.12
2.95
0.16
1.97 1.438
3/8 x 1/4 x 4
SK 13080 A
- RV 10 - 56 C 6.50
7.56
0.35
6.61 27.76 1.93
3.62
3.31
9.41
9.88
9.53
1.38
5.75
2.28 15.95 5.30
7.20
9.30
6.61
2.17
1.90
5.118 M10x16 0.16
3.98
0.20
2.56 1.813
1/2 x 3/8 x 5-1/4
SK 33100 A
- RV 10 - 56 C 8.47
9.37
0.35
7.95 29.53 2.91
3.62
3.98
9.85
12.24 11.22 1.38
7.17
2.36 15.95 5.30
7.20
9.30
7.95
2.76
2.62
7.087 M12x20 0.16
4.80
0.20
3.35 2.438
5/8 x 7/16 x 5-1/2
SK 43125 A
- RV 20 - 56 C 10.43
11.42
0.39
9.84 34.11 3.94
4.57
4.92 11.10 15.08 13.86 1.93
8.74
2.72 17.53 5.30
7.20
9.30
9.84
3.35
3.03
- 143 TC 9.055 M12x20 0.16
35.11
5.91
0.24
18.53 5.30
7.20 10.30 3.74 2.750
- RV 30 - 145 TC 36.98
6.14
12.56
2.80
20.40 5.30
7.20 11.30
5/8 x 5/8 x 8
Technical design may be subject to change
J26 www.nord.com
NOTES www.nord.com
K1
K2
R 400
R 500
R 100
R 150
R 196
R 210
R 250
R 280
R 300
R 350
GENERAL PARTS LIST
164 Circlip
165 Shim
166 Key
167 Shaft seal
168 Washer
170 Circlip
171 Input shaft bearing
172 Spacer
173 Spacer
174 Ball bearing
175 Input shaft bearing
176 Washer
177 Hexagon screw
178 Key
179 Oil slinger
180 Bearing cover
181 Circlip
182 Shim
183 Input shaft, plain
184 Input shaft, gearcut
185 Locking screw
186 Seal
187 Housing
188 Oil slinger
189 Supporting disc
501 Cover
502 Connecting flange
503 Adjustment cover
504 Adjusting cone
505 Ventilation cover
506 Adjustable pulley
507 Spring loaded pulley
508 V- belt
509 Handwheel
510 Locking handle
511 Spindle
512 Lock nut
513 Washer
514 Spring cotter
518 Thrust washer
519 Socket head screw
520 Circlip
521 Socket head screw
522 Hexagonal nut
523 Socket head screw
524 Hexagonal nut
525 Socket head screw
526 Hexagonal nut
527 Screw bushing
528 Set screw
529 Set screw
530 Socket head screw
531 Hexagonal nut
532 Bushing www.nord.com
GENERAL PARTS LIST www.nord.com
Angular control type WST for R 100 - R 400
Electric Remote Control type EMFST for R 100 - R 350
503 Adjustment cover
504 Adjusting cone
505 Ventilation cover
509 Handwheel
511 Spindle
512 Lock nut
514 Spiral pin
519 Socket head bolt
523 Socket head bolt
524 Hexagonal nut
527 Tapped bushing
528 Set srew
529 Set srew
535 Circlip
543 Bevel Gear
544 Sealing plug
545 Bevel Gear
549 Socket head bolt
555 Shaft
556 Case
557 Bushing
558 Washer
560 Worm geared motor
561 Hexagon bolt
563 Washer
575 Pulse generator
577 Pulse sensor
578 Speed indicator
584 Teleindicator
Non-contacting speed indicator for R 100 - R 500
K3
K4
GENERAL PARTS LIST
Electric Remote Control type EMFST
402 Housing
404 Hollow shaft, complete
406 Hollw shaft
407 Friction ring carrier
409 Friction ring
410 Socket head screw
411 Washer
413 Needle roller cup
414 Washer
415 Circlip
416 Looking cap
418 Circlip
419 Needle roller bearing
420 Distance ring
421 Shaft seal
424 Output shaft, plain
425 Output shaft, gearcut
430 Compression spring
432 Dowel pin
433 Spiral pin
434 Shim
435 Ball bearing
436 Supporting disc
437 Circlip
438 Circlip
439 Shaft seal
440 Key
441 Circlip
443 Locking screw
444 Seal
445 Flanged eye bolt
447 Intermediate housing
450 Set screw
451 Locking plug
452 Plate/intermediate flange
454 Socket head screw/Stud
455 Circlip
456 Adjusting spindle
460 Key
462 Handwheel
464 Washer
465 Hexagon nut
468 Scale
469 Rivet
472 Slide bar (NEMA)
474 Slide bar
477 Cam groove
478 Socket head screw
479 Set screw/Hexagon screw
481 Set screw
483 Spindle guide/ nut
484 Socket head screw
486 Indicator
487 Socket head screw
489 Driving disc
491 Supporting disc
492 V- ring
493 Set screw
494 Washer
495 Hexagon nut
498 Teleindicator
499 Servo motor www.nord.com
NOTES www.nord.com
K5
NOTES
K6 www.nord.com
NOTES www.nord.com
K7
!"#$%&'(#%)"#*"#(+,"!
!"#$%&%"#'(")(*+,-
-.%)"!+#()+
!"#$%&"'()%'$*+',++"$-&(.$/+)($0&(1&()'2&"3$4+(+2")5'+($.+627")'+.$)6$8+99+(3$)".$'4+$:;#+($26$6;*<+%'$'&$'4+$'+(=6$)".
%&".2'2&"6$&5$6)9+$4+(+2")5'+($6+'$5&('4>$$!"#$.+?2)'2&"$5(&=$6;%4$'+(=6$)".$%&".2'2&"6$=;6'$*+$61+%252%)99#$6+'$5&('4$2"
,(2'2"7$)".$%&"6+"'+.$'&$*#$8+99+(>
/.%)"!0,#1(+,"!
!"$ &(.+($ 64)99$ *+$ .++=+.$ )%%+1'+.$ &"9#$ ,4+"$ .;9#$ %&"52(=+.$ *#$ 8+99+(3$ )'$ -&(.$ /+)($ 0&(1&()'2&"@6$ 4&=+$ &552%+$ 2"
A);")B++3$A26%&"62"3$)".$;1&"$6;%4$%&"52(=)'2&"$'4+$&(.+($64)99$*+%&=+$)$%&"'()%'$*2".2"7$;1&"$'4+$1)('2+6$4+(+'&3
'4+2($6;%%+66&(6$)".$)6627"6>
2.%*#,)'3
C(2%+6$64&,"$)(+$926'$1(2%+6$)".$=)#$*+$6;*<+%'$'&$)1192%)*9+$.26%&;"'6>$$D"9+66$&'4+(,26+$)7(++.$;1&"$2"$,(2'2"73$1(2%+6
)(+$EF:$5)%'&(#$A);")B++3$A26%&"62">$$C(2%+6$)".$.26%&;"'6$)(+$6;*<+%'$'&$%4)"7+$,2'4&;'$"&'2%+$;"'29$&(.+($26$)%%+1'+.>
8+99+(@6$1(2%+6$.&$"&'$2"%9;.+$%&6'$&5$)"#$2"61+%'2&"$1+(=2'6$(+G;2(+.>
4.%5,1,+'$%6(##(!+7
8+99+($,)(()"'6$'4+$7&&.6$6&9.$4+(+;".+($'&$*+$5(++$5(&=$.+5+%'6$2"$=)'+(2)9$)".$,&(B=)"6421$;".+($"&(=)9$;6+$)".
6+(?2%+$"&'$)(262"7$5(&=$=26;6+3$"+7927+"%+3$&($)%%2.+"'3$2"%9;.2"7$*;'$"&'$92=2'+.$'&$'4+$;6+3$2"6')99)'2&"3$)".$'()"61&(')'2&"
&5$'4+$7&&.6$*#$'4+$:;#+(3$2'6$ )7+"'63$ 6+(?)"'63$ +=19&#++63$ &($ *#$ %)((2+(6>$ $ 8;%4$ &*927)'2&"6$ ;".+($ '426$ ,)(()"'#$ )(+
92=2'+.$'&$(+=+.#2"7$)"#$.+52%2+"%2+6$2"$'4+$7&&.6$)'$A);")B++3$A26%&"62"3$&($)'$ 6;%4$ 19)%+$ &($ 19)%+6$ 2"$ '4+$ D"2'+.
8')'+6$&5$!=+(2%)$)6$=)#$*+$.+627")'+.$*#$8+99+(>$$HIJ8$A!KK!-HL$8I!MM$CNKH!J-$HF$!-L$C!KH$FK$C!KH8$FE
!-L$ /FFO8$ HF$ AIJ0I$ :DLNK$ FK$ JH8$ !88J/-8$ I!8$ /JPN-$ AKJHHN-$ -FHJ0N$ FE$ 0M!JQNO$ ONEN0H8$ HF
8NMMNK>$$-FKO$/N!K$0FKC>$A!KK!-H8$JH8$CKFOD0H8$!/!J-8H$ONEN0H8$J-$Q!HNKJ!M$!-O$AFKRQ!-8IJC
EFK$ !$ CNKJFO$ FE$ ST$ QF-HI8$ EKFQ$ O!HN$ FE$ J-8H!MM!HJF-$ FK$ SU$ QF-HI8$ EKFQ$ O!HN$ FE$ 8IJCQN-H
AIJ0INPNK$0FQN8$EJK8H$F-$!MM$0FQCF-N-H8>$$VW$QF-HI8$EKFQ$O!HN$FE$J-PFJ0N$FK$TX$QF-HI8$EKFQ
O!HN$ FE$ J-8H!MM!HJF-$ AIJ0INPNK$ 0FQN8$ EJK8H$ F-$ /N!K8$ !-O$ IFD8J-/8$ F-ML>$ $ C!KH8$ AIJ0I$ !KN
8D:YN0H$HF$FCNK!HJF-!M$AN!K$!-O$HN!K3$8D0I$!8$:NMH8$Z$HK!0HJF-$OJ8083$!KN$-FH$0FPNKNO$:L$HIN
MJQJHNO$A!KK!-HL>$$:;#+($64)99$*+$(+G;2(+.$'&$5;("264$8+99+($,2'4$.+')296$&5$6;%4$.+5+%'6$)".$'426$,)(()"'#$64)99$*+
+55+%'2?+$)6$'&$6;%4$7&&.6$,42%4$8+99+(@6$+[)=2")'2&"$64)99$.26%9&6+$'&$2'6$6)'265)%'2&"$'&$4)?+$*++"$.+5+%'2?+$)".$,42%4$)'
8+99+(@6$ &1'2&"$ 64)99$ 1(&=1'9#$ '4+(+)5'+($ *+$ (+';("+.$ '&$ 8+99+($ &($ 2'6$ "&=2"++6>$ $ N\0NCH$ EFK$ HIN$ N\CKN88
A!KK!-HJN8$8NH$EFKHI$!:FPN3$8NMMNK$I!8$Q!ON$-F$A!KK!-HJN83$N\CKN883$JQCMJNO$FK$8H!HDHFKL3
!8$ HF$ HIN$ /FFO8$ 8FMO$ INKND-ONK3$ J-0MDOJ-/3$ :DH$ -FH$ MJQJHNO$ HF$ HINJK$ QNK0I!-H!:JMJHL$ FK
EJH-N88$ EFK$ !-L$ C!KHJ0DM!K$ CDKCF8N>$ $ !-L$ ON80KJCHJF-$ FK$ QFONM$ FE$ HIN$ /FFO8$ J8$ EFK
JON-HJEJ0!HJF-$FK$JMMD8HK!HJPN$CDKCF8N8$F-ML$!-O$8I!MM$-FH$:N$ONNQNO$HF$0KN!HN$!-$N\CKN88
A!KK!-HL>$$HIN$KNQNOJN8$FE$HIN$:DLNK$8NH$EFKHI$J-$HIJ8$8N0HJF-$!KN$N\0MD8JPN>$$J"$"&$+?+"'$64)99$'4+
8+99+($*+$92)*9+$'&$'4+$:;#+($&($'&$)"#$&'4+($1+(6&"$5&($)"#$9&66$&($.)=)7+3$.2(+%'$&($2".2(+%'3$)(262"7$&;'$&5$&($%);6+.$*#
'4+$ ;6+$ &($ &1+()'2&"$ &5$ '4+$ 7&&.63$ &($ 5&($ '4+$ 9&66$ &5$ 1(&52'63$ *;62"+663$ &($ 7&&.$ ,2993$ &($ 5&($ )"#$ 2"%2.+"')93$ 61+%2)9$ &(
%&"6+G;+"'2)9$.)=)7+6>$$8+99+($64)99$2"$"&$+?+"'$*+$92)*9+$'&$)"#$1+(6&"$&($52(=$$]2"%9;.2"7$)"#$)6627"++$&($:;#+(^$$+[%+1'
:;#+($)".$2'6$6;%%+66&(6>$$D"9+66$61+%252%)99#$);'4&(2_+.$*#$8+99+($2"$,(2'2"73$8+99+($64)99$"&'$*+%&=+$(+61&"62*9+$5&($)"#
(+1)2($,&(B$.&"+$*#$:;#+($&($)"#$&'4+($1)('#$&"$)"#$7&&.6$6&9.>$$!"#$%&6'6$&5$'4+$(+';("$&5$6;%4$7&&.6$'&$8+99+($64)99$*+
*&("+$ *#$ *;#+(>$ $ /&&.6$ 6&9.$ *;'$ "&'$ =)";5)%';(+.$ *#$ '4+$ 8+99+($ )(+$ *+2"7$ ,)(()"'+.$ )6$ '&$ .+5+%'6$ 2"$ =)'+(2)9$ )".
,&(B=)"6421$%&"626'+"'$,2'4$'4+$92=2'+.$,)(()"'#$1&92%#$&5$'4+$&(272")9$=)";5)%';(+($&5$'4+$7&&.6$)".$25$'4+(+$26$"&'$6;%4$)
92=2'+.$ ,)(()"'#$ 1&92%#3$ '4+$ ,)(()"'#$ 64)99$ *+$ 92=2'+.$ '&$ '4+$ 1(&?262&"$ &5$ '4+$ 1(+%+.2"7$ 1)()7()14$ &5$ !('2%9+$ X$ 4+(+2">
8')".)(.6$5&($'4+$&1+()'2"7$%4)()%'+(26'2%6$&5$'4+$7+)(*&[+6$)".$'4+$7+)(=&'&(6$)(+$2"$%&"5&(=2'#$,2'4$8+99+(@6$'+6'6>
8.%39"#+(&'%(!$%!"!)"!0"#1,+7
!
" # $ $ % & & ' ( ( ) $ $ * + + $ $ , * .
.
/ / ' 0 1 $ $ * .
.
$ $ / / ' / / $ $ / / 1 $ $ 0
) 5 , / / $ 6 1 $ $ ) ' 2 1 $ $ ( ( " $ $ 3 .
.
( / / ( " 0 $ $ 3 ( ( / / ( " $ $ / / 1 " $
* * 2 , $ $ 2 * $ $ " * / / $ $ % * "
$ 7 7 8 9 : : $ $ 2 ' # , $ $ ' + + / 1 .
.
$ $
+ + * .
2
.
) $ $ 3 (
1 & ( ; 1 .
( / / $ $ /
# $ $ *
/
+
-
+ $ $ / /
1
-
$ $ ,
1 $ $
4 1
0 *
% ( ( + + ( ( % ' /
* 2 , $ $ 7 7
/ ( ( * " , $ $ * + + $ $ /
' , $
/ 1 $ $ *
$ / / * $ $ 3 ( % $ $
.
.
,
2
5
1
%
.
.
$
-
$ *
$
.
.
$
% &
$ ) * 2 1
' ( ) $
1 & &
$ ( ,
) ' 2 1 : : $ $ / / * $ < 5 # 1 .
.
$ $ * .
.
$ $ ( / , $ " * ) ( " 1 1 , = = $ $ 6 5 / / $ $ ( " $ $ " * $ $ 1 ; 1 " / / $ , ' & & $ $ / / 1 $ % & ' ( ( ) $ $ 6 1 $ $ & ' / / 1
4 .
.
* ;
4 * / /
( (
*
2
0
1
.
.
2
, ' ) 4 & & 1 , =
'
$ $
= $ $
4
6
)
-
# $ $ /
1
,
/
$ $
'
-
'
,
1
5
"
$ $
.
2
%
$
1
$
'
2
.
.
.
)
.
.
.
( (
1
'
1
"
3
.
.
/ /
$
( (
$ *
,
"
= =
.
$
.
0
$ $
2
( (
,
( (
$ $
"
%
,
)
5
1
*
.
.
"
"
'
,
, /
"
( (
/ ( ( / /
%
*
5
1
"
/ /
$ $
,
1
$
%
$ $
*
'
) ' C 1 $ $ ' " # $ $ % ' " 0 1 $ $ 3 ( % $ $ / / 1 $ @ 1 & & 1 .
.
= = $ $ ( (
*
)
"
"
"
$
2
&
(
&
4
$
#
/ /
$ $
'
3
, $
'
$
"
1 (
#
"
'
0
$
= =
$
6
$ $
-
'
*
,
/
4
/ /
,
*
-
4
&
$
.
.
1
%
*
& 5 /
.
.
*
3
"
B
/ 1 $ $
( (
/
( ( ,
'
)
2 (
(
1
'
"
,
$ $
/ /
,
1
%
1
.
$
5
2
$
$
%
$ (
0
.
1 /
(
-
"
5
$
( (
$
$
$ / /
2
%
-
/ ( ( * " =
& &
1
'
1
> > $
( (
$
)
@
$ $
1
,
& & & &
-
$ $ $ ?
1
1
1 $ $
1 .
'
.
& &
A
.
$
@
& &
,
= $ $ % * " , ( 2 1 .
$
$ $
$
1
/ /
6
& &
-
%
.
, $ $
& &
1
'
'
1
"
$ $
/
.
.
/
"
2
'
1
$ $ .
$
.
&
1
%
3
*
1
1
1
0
(
,
)
,
/
,
1
-
,
.
=
1
= $
(
$
"
2
, ' & &
.
; 1 , $
, ' .
.
$ $ / / 1 $
$ $
# >
3
> $
$
1
/
$
'
/
$
,
( ; 1 2 > > $ $ $ $ ?
-
-
(
$ / / ( ) 1 $ $ & ( ( ) ( /
$ $ ) ' " 5
1
D
$ $
-
.
.
( (
( &
0
1
5
-
$ $
'
/ /
/
$ $
&
1
-
/
,
/ *
1
=
0 * * 2 , $ $ 3 ( & & $ $ 6 1 $ $ 2 1 & ( ; 1 .
.
1 2 $ 4 .
( " % ( 4 ' & & # $ ' % % * .
.
2 ( " 0 $ $ / / * $ , 4 1 % ( + + ( % ' / / ( * " , $ * .
.
$ $ , / / ' " 2 ' .
.
2 , $
5
'
4
4
*
4 &
"
(
= =
1
$ $
,
( ( "
$
,
$ / /
( (
*
0
$
"
4
( ( + +
'
( ( %
.
/ /
'
(
"
' &
/ /
$
$ $ 2
2
1
1 &
; ( (
( (
'
;
/
1
/ ( (
.
*
(
"
1
,
,
$
= =
$
$ $
*
$
.
$
.
$ $
F
( ( "
" $
,
$ /
( (
/
0
-
"
1
( (
$ $
+ + ( ( %
1
'
;
"
1
/ / $
"
$
/ $
%
$
-
/ /
'
-
"
' /
0
$ $
1 ,
<
$ $
5
( ( "
#
$
1
$
.
%
.
$ $
* "
-
,
'
/ /
,
.
.
$ $
5 %
'
/ /
$ $
( ( *
;
"
1
$ $ ' .
.
.
( ( + +
.
(
1
1
$ $
2
4
$
1
%
$ * .
.
$ $ E 5 ' " /
.
& &
.
)
' (
( ( ,
)
,
$
( ( 6
* +
& &
+
1
$
>
/ ( ( / / ( 1 ,
> $ $ $ $ ?
-
, * .
.
$
/
'
1 $ $
0
,
.
'
/ ' 0 1 $ $
1 1
)
*
2
1
.
.
" * " % * " + + *
2 ' ) ' 0 1 = = $
.
)
$ 2 ( .
(
.
/ /
1
#
%
$ $
/ /
*
$
+
*
$ $
6 1 1 " $ $ , 5 6 ) ( ( / / / / 1 2 $ $ 3 (
.
/
.
$ $
-
( (
1
"
$ $
( / / ( ( " $
2
0
$ / /
( .
*
-
1
*
1
%
$
2
$
/
.
.
/ =
,
1
$ $
$ $
E
/
'
*
5
.
$
( ( .
.
/ /
.
( , ( (
-
1
"
1
2
0
$
$
$ /
$
/ ( (
,
*
4
)
1 $ $ /
5
1
1
1 ; 1 " / / $ $ , ' & & & & $ $ @ 1 & & & & 1 .
.
$ $ 6 1 $ $ * .
.
$ $ 6 1 % * ) 1 $ $ & & ( ( ' 6 & & 1
/ $
%
$
$
$ &
/
( ( +
*
*
+ (
+ +
$ $
$
% '
& ( ( ) ( ( /
<
*
/
5
.
/ ( (
.
$ $
*
# 1
%
"
.
.
'
,
$ $
5
$
*
*
/ $ $ ' , $ $ , 1 / / $
,
.
+
.
$ $ / / * $
1
$ $
2
/
$
-
$ + + * .
.
/ /
1
-
6
$
$
$
$
# $
*
'
$
.
.
2 1 .
.
$ $ * .
.
$ $ /
6
,
*
5
;
%
1
) ' C 1 $ $ 5 4 $ $ + + * .
.
$ $ / / 1 $ $ , * .
.
/ / ' 0 1 $ * + + $ $ / / 1 $ $ 0 * * 2 , = = $ * .
.
$ $ .
.
1 4 & & ' % 1 $ $ * .
.
$ $ .
.
1 4 ' ( ( .
.
$ $ / / 1 $
-
=
$
= $ $ /
(
/
"
-
%
/ 1 $ $ ) * 2 1 & = = $ ' " 2 $ $ ( + + $ $ ,
1
(
$ $
2
@
1
1
"
& & & &
$ 0 * * 2 , = = $ $ ' , $ $ / 1 $ $ % '
$ ' " # $ $ * / / 1 .
.
$ $ 4 1 .
.
, * "
/
1 .
.
$ $ , ' & &
'
& & = = $
/ , $ $ * .
.
$ $ + + * .
,
$ ' /
,
" $ $ * .
.
$ $ 4 1 .
.
,
1
*
.
$ $ / / -
$
"
)
1
,
$ $
$ $
,
/ $ $ ( ( / / , $
'
&
+ +
5
#
*
*
$ $
.
%
.
,
6
$ $
-
,
1
'
$
$
$
$ * 3 " $
=
$
%
$
"
*
$
1
&
6
+
#
'
+ $
B
$
5
$ &
(
&
4
/
)
*
$ 4 .
(
1
/ $ $ (
$
,
"
"
.
* + +
-
,
$
(
$
,
$
/
'
"
( (
1
*
,
,
*
"
= =
=
6 5 , (
1 , ,
(
1
"
"
1
%
,
1
,
> >
$ $ * .
.
$ $ 0 * * 2 $ 3 ( ( & & & & > > $ $ $ $ @ ( ( 4 4 ( " 0 $ $ 2 ' / / 1 , $ $ ' .
.
1 $ $ 1 , / / ( ( ) ' / 1 , $ 5 " & 1 , , $ 4 ' .
.
/ / ( 1 , $ $ 1 B 4 .
1 , , & # $ ' 0 .
1 1 $ $ * " $ $ / / ( ( ) 1 $ $ * + + $ $ / / 1
:.%0"#)'%1(;'<#'
H4+$ &*927)'2&"$ &5$ '4+$ 8+99+($ 64)99$ *+$ =&.252+.$ &($ +[%;6+.3$ )6$ '4+$ %)6+$ =)#$ *+3$ 5&($ (+)6&"6$ &5$ !%'6$ &5$ /&.3$ ,)(3
7&?+("=+"')9$9),$(+7;9)'2&"63$6'(2B+6$&($9&%B`&;'63$52(+3$*(+)B.&,"$&5$=)%42"+(#3$,4+'4+($2"$2'6$&,"$*;62"+66$+"'+(1(26+3
&($25$5&($)"#$&'4+($%);6+$*+#&".$8+99+(@6$%&"'(&93$'4+$7&&.6$%)""&'$*+$.+92?+(+.$&($'4+2($.+92?+(#$*+%&=+6$.+9)#+.$2"$,4&9+
&($2"$1)('>$$J"$'4+$)*&?+$2"6')"%+6$'2=+$5&($.+92?+(#$64)99$*+$+['+".+.$5&($'4+$1+(2&.$&5$'4+$.+9)#$%);6+.3$,2'4$'4+$1(&?26&3
4&,+?+(3$'4)'$+2'4+($1)('#$=)#$%)"%+9$2"$,(2'2"7$'4+$;".+92?+(+.$1&('2&"$&5$'4+$&(.+($&($%&"'()%'$25$'4+$.+9)#$+[%++.6$62[$]W^
=&"'46$ 5(&=$ '4+$ .+92?+(#$ .)'+$ &(272")99#$ %&"52(=+.$ *#$ 8+99+(>$ $ J"$ "&$ +?+"'$ 64)99$ 8+99+($ *+%&=+$ 92)*9+$ 2"$ '4+$ )5&(+6)2.
2"6')"%+6$'&$:;#+($&($)"#$'42(.$1)('#$5&($%&"6+G;+"'2)9$.)=)7+6$&($*;62"+66$9&66>
=.%39,*1'!+%(3%<!,+
N)%4$6421=+"'$*#$8+99+($64)99$*+$'(+)'+.$)6$)$6+1)()'+$)".$.26'2"%'$;"2'$,2'4$(+61+%'3$*;'$&"9#$,2'4$(+61+%'$'&$5&(,)(.2"73
'+(=6$&5$1)#=+"'3$)".$'4+$=)B2"7$&5$%9)2=6$*#$'4+$:;#+(a$$1(&?2.+.3$4&,+?+(3$'4)'$25$'4+$:;#+($.+5);9'6$2"$'4+$1)#=+"'$&5
)"#$&*927)'2&"$'&$8+99+($&($)"#$2"6')99=+"'6$'4+(+&53$;".+($)"#$)7(++=+"'$*+',++"$:;#+($)".$8+99+(3$&($25$:;#+($(+5;6+6$'&
)%%+1'$)"#$7&&.6$,4+"$'+".+(+.$5&($.+92?+(#3$'4+$8+99+($=)#3$&"$525'++"$]Sb^$.)#6$,(2''+"$"&'2%+$'&$'4+$:;#+(3$,2'4&;'
1(+<;.2%+$'&$8+99+(@6$&'4+($9),5;9$(+=+.2+63$+2'4+($.+5+($5;('4+($1+(5&(=)"%+$;"'29$'4+$.+5);9'+.$1)#=+"'6$)(+$=).+$2"$5;993
&($=)B+$5;';(+$.+92?+(2+6$5&($%)64$2"$).?)"%+$&"9#3$&($'(+)'$'4+$+"'2(+$%&"'()%'$&($%&"'()%'6$,2'4$:;#+($)6$*(+)%4+.$*#$'4+
:;#+($)".$1;(6;+$2'6$(+=+.2+6$5&($*(+)%4>
>.%?<7'#@3%#'0<3(5%"0%$'5,A'#7
J5$:;#+($(+5;6+6$'&$)%%+1'$.+92?+(#$&5$)"#$7&&.6$'+".+(+.$5&($.+92?+(#3$'4+"$8+99+(3$,2'4&;'$1(+<;.2%+$'&$8+99+(@6$&'4+($9),5;9
(+=+.2+63$=)#$+2'4+($6'&(+$&($%);6+$6;%4$7&&.6$'&$*+$6'&(+.$2"$)$,)(+4&;6+3$5&($*;#+(@6$)%%&;"'$)".$)'$:;#+(@6$%&6'3$(26B
)".$+[1+"6+3$&($6+99$6;%4$7&&.6$],2'4&;'$"&'2%+^$'&$)"#$1;(%4)6+6$)'$1;*92%$&($1(2?)'+$6)9+3$)".$4&9.$'4+$:;#+($92)*9+$5&(
)"#$.255+(+"%+$*+',++"$])^$'4+$%&"'()%'$1(2%+$&5$'4+$7&&.63$)".$]*^$'4+$1(2%+$)'$,42%4$7&&.6$)(+$(+6&9.$9+66$'4+$%&6'6$)".
+[1+"6+$&5$6;%4$(+6)9+$2"%9;.2"7$*(&B+()7+$%&==2662&"63$&($(+6'&%B2"7$%4)(7+6>
B.%&""$3%,!%+#(!3,+
J5$1(2&($'&$.+92?+(#$&($,429+$'4+$7&&.6$)(+$2"$'()"62'3$:;#+($&($8+99+($*+%&=+6$*)"B(;1'$&($2"6&9?+"'3$&($)"#$1+'2'2&"$2"$*)"B(;1'%#$&($ 5&(
'4+$(+&(7)"2_)'2&"$&($5&($)$6')'+$%&;('$(+%+2?+(6421$26$529+.$)7)2"6'$:;#+($&($8+99+(3$)6$'4+$%)6+$=)#$*+3$'4+"$'4+$&'4+($1)('#
4+(+'&$=)#$5&('4,2'4$'+(=2")'+$'426$%&"'()%'$*#$72?2"7$,(2''+"$"&'2%+$&5$6;%4$'+(=2")'2&">$$8;%4$'+(=2")'2&"$64)99$"&'$)55+%'
)"#$%9)2=$5&($.)=)7+6$)?)29)*9+$'&$'4+$:;#+(3$1(&?2.+.$'4)'$25$:;#+($26$'4+"$2".+*'+.$'&$8+99+(3$'4+$)=&;"'$&5$)"#$6;%4
.)=)7+$%9)2=$64)99$*+$)*)'+.$'&$'4+$+['+"'$'4)'$'4+$2".+*'+."+66$&5$:;#+($'&$8+99+(3$)6$)%';)99#$1)2.$2"$=&"+#3$26$)*)'+.
*#$ )"#$ &(.+($ &5$ <;.7+=+"'$ +"'+(+.$ &($ )"#$ 19)"$ ).&1'+.$ 2"$ )"#$ *)"B(;1'%#3$ (+&(7)"2_)'2&"3$ (+%+2?+(64213$ &($ 62=29)(
1(&%++.2"7>$$8;%4$'+(=2")'2&"$64)99$"&'$1(+<;.2%+$'4+$8+99+(@6$(274'6$'&$)"#$)=&;"'6$'4+"$.;+$;".+($'4+$%&"'()%'>$$J5$:;#+(
*+%&=+6$*)"B(;1'$&($2"6&9?+"'$&($)"#$1+'2'2&"$2"$*)"B(;1'%#$&($5&($(+&(7)"2_2"7$&($25$)$6')'+$%&;('$(+%+2?+(6421$26$529+.
)7)2"6'$:;#+(3$'4+"3$)'$2'6$&1'2&"$8+99+($=)#$')B+$1&66+662&"$&5$)"#$7&&.6$'4+(+'&5&(+$6&9.$'&$:;#+(3$2"$%&""+%'2&"$,2'4
,42%4$'4+$5;99$1;(%4)6+$1(2%+$4)6$"&'$*++"$1)2.3$)")9&7&;6$'&$'4+$'+("6$)".$1(&?262&"6$6+'$5&('4$2"$C)()7()146$SS$)".$ST
4+(+2")5'+(>
-C.%$'5,A'#7
])^$D"9+66$&'4+(,26+$)7(++.3$.+92?+(#$&5$'4+$7&&.6$'&$)"#$%)((2+($64)99$%&"6'2';'+$.+92?+(#$'&$'4+$:;#+(3$)".$'4+(+)5'+($'4+
(26B$&5$9&66$&($.)=)7+$'&$'4+$7&&.6$64)99$*+$;1&"$'4+$:;#+(>$$]*^$J5$'4+$:;#+($.&+6$"&'$72?+$.+92?+(#$2"6'(;%'2&"6$'&$'4+
8+99+($)'$9+)6'$]Sc^$.)#6$1(2&($'&$'4+$.+92?+(#$.)'+$+[$5)%'&(#$%&"52(=+.$*#$'4+$8+99+(3$'4+$8+99+($=)#$.+92?+($'4+$7&&.6$'&$)
%)((2+($ &5$ 2'6$ &,"$ %4&&62"73$ )'$ :;#+(@6$ %&6'$ )".$ (26B3$ &(3$ )'$ 8+99+(@6$ &1'2&"3$ =)#$ 6'&(+$ '4+$ 7&&.6$ &"$ '4+$ 12+($ &($ )"#
,)(+4&;6+3$)'$:;#+(@6$%&6'$)".$(26B>$$!"#$1;(%4)6+$1(2%+$2"$6;%4$+?+"'$*+%&=+6$.;+$)".$1)#)*9+$,2'42"$'+"$]Sc^$.)#6$&5
6;%4$6'&()7+>
--.%*(71'!+%"0%*<#)9(3'%*#,)'
H2=+$&5$1)#=+"'$26$&5$'4+$+66+"%+$;".+($'4+$%&"'()%'>$$D1&"$.+5);9'$2"$)"#$&5$'4+$'+(=6$&5$'4+$%&"'()%'3$&($5)29;(+$'&$%&=19#
,2'4$)"#$&5$'4+$%&".2'2&"6$'4+(+&53$&($;1&"$6+2_;(+$&5$'4+$1(&1+('#$;".+($+[+%;'2&"$&($&'4+($9+7)9$1(&%+663$&($25$'4+$:;#+(
*+%&=+6$*)"B(;1'$&($2"6&9?+"'3$&($)"#$1+'2'2&"$5&($(+&(7)"2_)'2&"$&($5&($)$6')'+$%&;('$(+%+2?+(6421$26$529+.$)7)2"6'$:;#+(3$&(
25$'4+$:;#+($=)B+6$)"#$)6627"=+"'$5&($'4+$*+"+52'$&5$2'@6$%(+.2'&(6$&($&'4+(,26+$6+9963$+"%;=*+(6$&($.261&6+6$&5$'4+$7&&.63
&($25$5&($)"#$&'4+($(+)6&"$'4+$8+99+($64&;9.$.++=$2'6+95$2"6+%;(+3$'4+$5;99$)=&;"'$&5$'4+$1;(%4)6+$1(2%+$'4+"$(+=)2"2"7
;"1)2.$64)99$)'$&"%+$*+%&=+$.;+$)".$1)#)*9+$)'$'4+$&1'2&"$&5$'4+$8+99+(>
-/.%?<7'#@3%$'0(<5+
D1&"$'4+$:;#+(@6$.+5);9'3$'4+$8+99+($=)#$.261&6+$&5$'4+$=+(%4)".26+$2"$)"#$=)""+($'4)'$2'$.++=6$52'$)".3$25$2'$.+62(+6$'&
(+6+99$6)=+3$=)#$.&$6&$)'$1(2?)'+$&($1;*92%$6)9+3$,2'4$&($,2'4&;'$"&'2%+3$)".$,2'4$&($,2'4&;'$'4+$1(&1+('#$*+2"7$)'$'4+$19)%+
&5$6)9+3$6;*<+%'3$4&,+?+(3$'&$)1192%)*9+$9),6>$$H4+$8+99+($&($2'6$)6627"6$64)99$4)?+$'4+$(274'$'&$*2.$)'$6;%4$6)9+$)".$=)#
*+%&=+$'4+$1;(%4)6+($&5$'4+$1(&1+('#>$$H4+$1(&%++.6$&5$'4+$6)9+$64)99$52(6'$*+$)1192+.$'&$'4+$+[1+"6+6$2"%;((+.$2"$(+')B2"73
(+1)2(2"73$6'&(2"7$)".$6+992"7$'4+$7&&.63$(+)6&")*9+$)''&("+#@6$5++6$2"%9;.+.3$)".$'4+"$64)99$*+$)1192+.$'&$'4+$1)#=+"'$&5
'4+$*)9)"%+$.;+$;".+($'4+$%&"'()%'>$$!"#$6;(19;6$)=&;"'$64)99$*+$1)2.$'&$'4+$:;#+(>$$J5$)$.+52%2+"%#$(+6;9'6$)5'+($'4+$(+6)9+3
'4+$:;#+($)7(++6$'&$1)#$6;%4$5&('4,2'43$'&7+'4+($,2'4$(+)6&")*9+$)''&("+#@6$5++63$5&($'4+$(+%&?+(#$&5$'4+$7&&.6$2"%;((+.$*#
'4+$8+99+(>$$J5$;1&"$'4+$:;#+(@6$.+5);9'3$'4+$8+99+($+9+%'6$"&'$'&$(+6+99$)"#$7&&.6$,42%4$2'$=)#$(+1&66+663$'4+"$'4+$%&6'$&5
(+1&66+662&"3$2"%9;.2"7$(+)6&")*9+$)''&("+#@6$5++63$64)99$5&('4,2'4$*+$.;+$)".$1)#)*9+$5(&=$:;#+($'&$8+99+(>
-2.%3')<#,+7%,!+'#'3+%(!$%+,+5'
J"$ 6')'+6$ )".$ 9&%)92'2+6$ ,42%4$ )(+$ 7&?+("+.$ *#$ '4+$ D"25&(=$ 0&==+(%2)9$ 0&.+3$ '426$ %&"'()%'$ 64)99$ 6+(?+$ )6$ 6+%;(2'#
)7(++=+"'3$ (+6+(?2"7$ 2"$ 8+99+($ )$ 6+%;(2'#$ 2"'+(+6'$ ;"'29$ 5;99$ 1)#=+"'$ &5$ 1;(%4)6+$ 1(2%+>$ $ H4+$ 1(&?262&"6$ &5$ '4+$ D"25&(=
0&==+(%2)9$ 0&.+$ (+7)(.2"7$ 6+%;(2'#$ 2"'+(+6'$ 64)99$ 4)?+$ 1(+5+(+"%+$ )".$ )119#$ 25$ 2"%&"626'+"'$ ,2'4$ &'4+($ '+(=6$ &5$ '4+
%&".2'2&"6$&5$6)9+>$$J"$6')'+6$)".$9&%)92'2+6$,4+(+$'4+$D"25&(=$0&==+(%2)9$0&.+$.&+6$"&'$)119#3$'2'9+$'&$'4+$7&&.6$64)99
(+=)2"$2"$'4+$8+99+($&($2'6$)6627"6$;"'29$5;99$1)#=+"'$&5$'4+$1;(%4)6+$1(2%+>$$:;#+($)7(++6$'&$+[+%;'+$5&('4,2'4$)"#$)".$)99
.&%;=+"'6$2"$6;%4$)$,)#$)".$5&(=$)6$ 8+99+($ =)#$ "++.$ 5&($ 5292"7$ &($ (+%&(.2"7$ '4+$ 6+%;(2'#$ 2"'+(+6'$ ;".+($ '4+$ D"25&(=
0&==+(%2)9$0&.+$,2'4$'4+$1(&1+($(+726'+(6$&($&552%+63$&($5&($5292"7$&($(+%&(.2"7$'4+$%&".2'2&")9$6)9+6$%&"'()%'
-4.%3(5'3%(!$%<3'%+(D
:;#+($)7(++6$'&$*+)($)".$1)#$)"#$6)9+6$&($;6+$')[$2"$%&""+%'2&"$,2'4$'4+$1;(%4)6+$4+(+2"3$)".$'&$4&9.$'4+$8+99+($4)(=9+66
5(&=$1)#=+"'>$$!'$'4+$&1'2&"$'4+$8+99+(3$:;#+($64)99$72?+$+?2.+"%+$&5$1)#=+"'$&($&5$+[+=1'2&"$%+('252%)'+>
-8.%,!3<#(!)'
H4+$:;#+($64)99$B++1$'4+$7&&.6$2"6;(+.$)7)2"6'$.)=)7+$*#$52(+3$,)'+($&($&'4+($%)6;)9'#$)6$(+G;2(+.$*#$8+99+(3$,2'4$)
%&=1)"#$)%%+1')*9+$'&$8+99+(3$,2'4$9&66$1)#)*9+$'&$8+99+($5&($'4+$'&')9$1;(%4)6+$1(2%+$;"'29$'4+$8+99+($26$5;99#$1)2.>$$8+99+(3$25
2'$6&$+9+%'63$=)#$19)%+$6)2.$2"6;()"%+$)'$:;#+(@6$+[1+"6+d$8+99+($=)#$%)"%+9$6;%4$2"6;()"%+$)'$)"#$'2=+$)".$,2'4&;'
"&'2%+$)".$=)#$(+%+2?+$'4+$(+';("$1(+=2;=3$25$)"#>
-:.%1"$,0,)(+,"!%?7%3'55'#
!"#$%&"'()%'$=)#$*+$)6627"+.$&($'()"65+((+.$*#$'4+$8+99+(3$&($'4+$'2=+$5&($'4+$=)B2"7$&5$)"#$1)#=+"'$.;+$*#$:;#+($=)#
*+$+['+".+.$*#$8+99+($,2'4&;'$.+(&7)'2&"$&5$)"#$&5$'4+$(274'6$&5$'4+$8+99+($&($2'6$)6627"6>$$A)2?+($*#$)"#$1)('#$&5$)"#
.+5);9'$64)99$"&'$*+$.++=+.$)$,)2?+($&5$)"#$6;*6+G;+"'$.+5);9'
-=.%#'+<#!'$%&""$3
-&$7&&.6$,299$*+$)%%+1'+.$5&($(+';("$;"9+66$);'4&(2_+.$2"$,(2'2"7$*#$8+99+(>$$J"$)99$%)6+63$'()"61&(')'2&"$)".$(+6'&%B2"7
%4)(7+6$,299$*+$*&("+$*#$:;#+(>
->.%*()E,!&
H4+$6+99+($.&+6$"&'$%4)(7+$5&($6')".)(.$1)%B)72"7$5&($.&=+6'2%$6421=+"'>$$H4+$:;#+($,299$*+$%4)(7+.3$4&,+?+(3$5&($+[1&('
1)%B)72"7$&($&'4+($61+%2)9$1)%B2"7$.+62(+.>$$0&6'$5&($%)(')7+$'&$6421$&($'()"65+($+[1(+66$,299$*+$)..+.$'&$'4+$2"?&2%+>$$-&
%(+.2'$,299$*+$)99&,+.$25$"&$1)%B2"7$26$(+G;2(+.>
-B.%'D*"#+%"#$'#
N[1&('$ &(.+(6$ )(+$ '&$ *+$ )%%&=1)"2+.$ *#$ )$ %&"52(=+.$ 2((+?&%)*9+$ M+''+($ &5$ 0(+.2'$ 2"$ 8+99+(@6$ 5)?&(3$ 2"$ D"2'+.$ 8')'+6
%;((+"%#3$,2'4$)"$)%%(+.2'+.$D"2'+.$8')'+6$*)"B3$6;*<+%'$'&$8+99+(@6$.()5'3$,2'4$642112"7$.&%;=+"'6$)'')%4+.>
/C.%)(!)'55(+,"!
C9)%2"7$&(.+(6$&"$4&9.$&($%)"%+99)'2&"$&5$&(.+(6$(+G;2(+$8+99+(@6$,(2''+"$)11(&?)93$)".$)(+$6;*<+%'$'&$%)"%+99)'2&"$)".e&(
(+6'&%B2"7$%4)(7+6>
/-.%?<7'#@3%#'3*"!3,?,5,+7%(3%+"%1(,!+'!(!)'
:;#+($64)99$;6+$)".$64)99$(+G;2(+$2'6$+=19&#++6$)".$)7+"'6$'&$;6+$)99$6)5+'#$.+?2%+6$)".$7;)(.6$)".$64)99$=)2"')2"$'4+
6)=+$2"$1(&1+($,&(B2"7$&(.+(>$$:;#+($64)99$;6+$)".$(+G;2(+$2'6$+=19&#++6$)".$)7+"'6$'&$;6+$6)5+$&1+()'2&"$1(&%+.;(+6$2"
&1+()'2"7$'4+$+G;21=+"'$)".$64)99$5;('4+($&*+#$)".$4)?+$2'6$ +=19&#++6$ )".$ )7+"'6$ &*+#$ 6)5+'#$ 2"6'(;%'2&"6$ 72?+"$ *#
8+99+(>$$J5$:;#+($5)296$'&$=++'$'4+$&*927)'2&"6$4+(+2"3$:;#+($)7(++6$'&$2".+="25#$)".$6)?+$8+99+($4)(=9+66$5(&=$)"#$92)*292'#
&($&*927)'2&"$,2'4$(+7)(.$'&$)"#$1+(6&")9$2"<;(2+6$&($1(&1+('#$.)=)7+6$.2(+%'9#$&($2".2(+%'9#$%&""+%'+.$,2'4$'4+$&1+()'2&"$&5
'4+$+G;21=+"'>$$:;#+($5;('4+($)7(++6$'&$"&'25#$8+99+($1(&=1'9#$)".$2"$)"#$+?+"'$"&'$9)'+($'4)"$'+"$]Sc^$.)#6$)5'+($"&'2%+$&(
B"&,9+.7+$ &5$ )"#$ )%%2.+"'$ &($ =)95;"%'2&"$ 2"?&9?2"7$ 8+99+(@6$ +G;21=+"'$ ,42%4$ 4)6$ %);6+.$ 1+(6&")9$ 2"<;(#$ &($ 1(&1+('#
.)=)7+6$)".$'&$%&&1+()'+$5;99#$,2'4$8+99+($2"$2"?+6'27)'2"7$)".$.+'+(=2"2"7$'4+$%);6+6$&5$6;%4$)%%2.+"'$)".$=)95;"%'2&">
J"$'4+$+?+"'$'4)'$:;#+($5)296$'&$72?+$6;%4$"&'2%+$'&$8+99+($&($'&$%&&1+()'+$,2'4$8+99+(3$:;#+($64)99$*+$&*927)'+.$'&$2".+="25#
)".$6)?+$8+99+($4)(=9+66$5(&=$)"#$6;%4$%9)2=6$)(262"7$5(&=$6;%4$)%%2.+"'>
//.%1,3)'55(!'"<3%*#"A,3,"!3
])^$J5$5&($)"#$(+)6&"$)$1(&?262&"$&5$)$%&"'()%'$26$9+7)99#$2"?)92.3$'4+"$2"$6;%4$+?+"'$'4+$(+6'$&5$'4+$%&"'()%'$64)99$(+=)2"$2"$5;99
5&(%+$)".$)55+%'3$+[%+1'$'4)'$'4+$1)('2+6$64)99$'(#$'&$(+19)%+$6;%4$2"?)92.$1(&?262&"$%9&6+6'$'&$'4+2($&(272")9$=;';)9$2"'+"'2&"6>
]*^$!"#$)=+".=+"'6$'&$)"#$%&"'()%'$&($%&"'()%'6$(+G;2(+$'4+$%&"6+"'$2"$,(2'2"7$*#$*&'4$1)('2+6>
/2.%;<#,3$,)+,"!
!"#$.261;'+$)(262"7$;".+($'4+$%&"'()%'$=)#$*+$*(&;74'$*+5&(+$)"#$%&;('$&5$1(&1+($<;(26.2%'2&"$,2'42"$'4+$D"2'+.$8')'+6>
/4.%!"!%(33,&!1'!+%?7%?<7'#
0&"'()%'$&($%&"'()%'6$=)#$"&'$*+$)6627"+.$*#$'4+$:;#+($,2'4&;'$1(2&($,(2''+"$%&"6+"'$&5$'4+$8+99+(>
/8.%(**5,)(?5'%5(6
!99$%&"'()%'6$)(+$7&?+("+.$*#$'4+$)1192%)*9+$9),6$&5$'4+$8')'+$&5$A26%&"62">
NOTES
K10 www.nord.com
The NORD Family of Products
HELICAL IN-LINE
Foot or Flange Mount
1/6 to 200 hp
Torque up to 177,000 lb-in
Output speed – 0.1 to 960 rpm
Gear ratios – 1.82:1 to over 300,000:1
Efficiency 95%+
NORDBLO C ®
HELICAL IN-LINE
Foot or Flange Mount
1/6 to 50 hp
Torque up to 26,550 lb-in
Output speed – 4.8 to 900 rpm
Gear Ratios – 1.88:1 to over 370:1
Industry interchange
PARALLEL HELICAL
CLINCHER™
Shaft, Flange or Foot Mount
1/6 to 200 hp
Output torque up to 531,000 lb-in
Output speeds – 0.1 to 410 rpm
Gear ratios 4.26:1 to over 300,000:1
Efficiency 95%+
RIGHT ANGLE
HELICAL-BEVEL
Foot, Flange or Shaft Mount
1/6 to 200 hp
Output torque up to 230,100 lb-in
Output speed – 0.1 to 218 rpm
Gear ratios 8.04:1 to over 300,000:1
Efficiency 95%+
RIGHT ANGLE
HELICAL-BEVEL 2-S TAGE
Foot, Flange or Shaft Mount
1/6 to 7.5 hp
Output torque up to 6950 lb-in
Output speed – 24 to 360 rpm
Gear ratios 4.1:1 to 72:1
Efficiency 95%+
RIGHT ANGLE
HELICAL-WORM
Foot, Flange or Shaft Mount
1/6 to 20 hp
Output torque up to 27,585 lb-in
Output speed 0.1 to 398 rpm
Gear ratios 4.40:1 to over 300,000:1
MINICASE ® RIGHT
ANGLE WORM
Foot, Flange or Shaft Mount
1/6 to 2 hp
Output torque up to 2,390 lb-in
Output speeds 3 to 324 rpm
Gear ratios 5.40:1 to 582:1
M OTORS AND
BRAKEMOTORS
1/6 to 200 hp
Standard and High Efficiency
230/460V – 60Hz
575V – 60Hz
400V – 50Hz
Others Available
NORDAC ® VECTOR MC
1/3 to 3 hp
230V – 50/60Hz
380/460V – 50/60Hz
N O R DAC ® V E C TO R
2 to 200 hp
380/460V – 50/60Hz
NORD Gear Corporation
National Customer Service Toll Free 888/314-NORD (6673)
NORD Gear Limited
Toll Free in Canada 800/668-4378
WEST S O U T H CANADA M I DWEST
1121 Railroad Street, Bldg. 101 647 Michael Wylie Drive 41 West Drive 800 Nord Dr., P.O. Box 367
Corona, CA 92882 Charlotte NC 28217 Brampton, Ontario L6T 4A1
Fax 888/GOT-NORD (408-6673)
Waunakee, WI 53597-0367
Phone 608/849-7300
Fax 800/373-NORD (6673)
Phone 704/529-1255
Fax 888/259-NORD (6673)
Phone 905/796-3606
Fax 905/796-8130
Phone 909/279-2600
www.nord.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 252 SK 9033 - RV
- 252 SK 9023 - RV
- 252 SK 9022 - RV
- 252 SK 9013 - RV
- 252 SK 9012 - RV
- 252 SK 9033 - RV
- 253 SK 9033 - RV
- 253 SK 9022 - RV
- 253 SK 9012 - RV
- 253 SK 9033 - RV