CODELOCKS

Codelocks2010-A5-Inner.indd 1 17/2/10 09:18:33

Codelocks Electronic Range

Codelocks electronic locks are multi-code, multifunction, programmable products for a variety of applications, from cabinets and lockers to high traffic doors.

Codelocks Mechanical Range

Mechanical Codelocks are easy to install products with a number of options for a variety of applications. Where a single easily changed code is required mechanical locks are an ideal access control solution.

Cabinet Lock 1000

Electronic

Cabinet Lock 1200

Electronic

Codelock 2000

Electronic

Codelock 100

Mechanical

Codelock 200

Mechanical

Codelock 400

Mechanical

Codelock 4000

Electronic

Codelock 5000

Electronic

Codelocks Complete Range 2

Electronic Locks

CL1000 Cabinet Lock

CL1200 Cabinet Lock

CL2000 Light duty

8

10

CL4000 Medium duty with lever handles 12

CL5000 Heavy duty with lever handles 14

4

6

Mechanical Locks

CL100 Entry level locks

16

18

CL200 Premium quality, light duty locks 20

CL400 Premium quality, medium duty locks with lever handles 22

CL500 Premium quality, heavy duty locks with lever handles 24

CL600 Premium quality, heavy duty locks with lever handles 26

CL0460 Narrow Stile Codelock 28

Technical Specifications 30

2

Codelocks2010-A5-Inner.indd 2-3

Codelock 600

Mechanical

Codelock 500

Mechanical

Codelock 0460

Mechanical

3

17/2/10 09:18:42

Codelocks Electronic Range

The electronic Codelocks range provides major benefits over mechanical locks.

With rapid programming at the keypad giving multiple codes, one time user codes, auto alarm release and remote release options.

Not requiring external power supplies, the electronic range provides a quick and cost effective access control solutions for a wide range of applications, from lockers and cabinets to the primary lock on a range of doors.

Typical features include:

Door locks

Allows up to 80 User codes, 4,5 or 6 digits long

Over 1,000,000 code combinations available

On door programming and code change via Master code

Allow up to 10 one time user codes

Locked unlocked LED indicator option

PVD weather resistant finish

Up to 200,000 operations

Key override

Code free mode

Remote release options

Cabinet locks

Rapid retrofit

Up to 80,000 operations

Battery override feature

Single user code

Single Master and Submaster codes

Locker mode / single code options

4

Codelocks2010-A5-Inner.indd 4-5 17/2/10 09:18:49

Codelocks Cabinet Lock CL1000

For Cupboards, Cabinets and Lockers

The Cabinet Lock has been designed as a cost effective, easy and quick retrofit for cam locks supplied as standard on a wide range of lockers, cabinets and cupboards. It can just as easily be fitted to lockers or cabinets, which don’t have a locking device already fitted, giving the user immediate, simple, keypad access without the hassle of keys!

Fitting could not be easier, simply remove existing cam lock, drill a 6mm (1/4”) hole for the upper fixing bolt, position the lock on the door and secure with the fixing nut and upper bolt. Select and fit the appropriate cam, job done!

The cabinet lock can also be fitted to cupboards or similar enclosures that do not have a cam fitted by simply drilling the upper fixing hole and 16mm (

5 /

8

”)hole for the spindle, giving immediate access control.

10-button keypad

User Codes are 4 digits long

Master and Sub-Master Codes are 8 digits long

Repeat code mode

Single use code mode (locker mode)

15,000 openings from 2 x AAA cells (supplied)

Easy to fit in a matter of minutes

All parts/fixings/template included

Quick retrofit for cam locks

Fit to units that do not have an existing lock

Easy programming and code change

IP 54 Rated when used in conjunction with CL1000RG door gasket – available separately

CL1000 is also available in horizontal right hand and left hand models

Battery failure override.

CL1000LH

Left hand

CL1000RH

Right hand

Technical information on page 32 6


Codelocks Cabinet Lock CL1200

For Cupboards, Cabinets and Lockers

The CL1200 Cabinet Lock is ideal in controlled use found on leisure centre lockers, medical carts, individual cupboards, key cabinets etc. In more

‘challenging’ environments we needed to design a more robust lock.

The CL1200 can handle tougher environments and heavy use.

10 individual stainless steel buttons

50,000 operations from 2 x AA cells (supplied)

2 independent fixing points

Auto unlock program

Audible key pad

Supplied with a selection of spindle adaptors allowing installation to various thicknesses of cabinet

User Codes are 4 digits long

Master and Sub-Master Codes are 8 digits long

Repeat code mode

Single use code mode (locker mode)

Battery failure override

8


Technical information on page 34

17/2/10 09:19:02

Codelocks CL2000 Range

CL2000 electronic lock provides multifunction access control for situations that do not justify a full size lever lock. The lock is easily fitted as a new installation or as a rapid retrofit when upgrading from basic single code mechanical locks.

Programme commands include:

Set new User Code

Suspend and restore individual User Codes

Suspend, restore and delete all User Codes

Set one-time User Codes

Set and cancel Code Free mode

Change Master Code

Set or change Sub-Master Code

Rapid Retrofit for basic single code mechanical codelocks

On door programming via Master Codes in seconds

Allows up to 80 User Codes, 4,5 or 6 digits long

Allows up to 10 one-time User Codes to be entered

Key override as standard

Over 80,000 operations from 2 x AA cells (supplied)

Can be fitted to square follower latch using adaptor

Locked • /unlocked • ,LED Indicator option

Non handed

PVD weather resistant, low maintenance finish

CL2000

The front plate is common to all functions

CL2200 Surface Deadbolt

(inside view)

CL2255 Mortice Latch

(front view)

16mm ( 5 / 8 ”)


(inside view)

CL2210 Mortice Deadbolt

(inside view)

Rapid Retrofit

The CL2000 range has been designed with retrofit in mind.With the same fixing holes as the majority of basic mechanical digital locks, access control can be upgraded in a matter of minutes.

Step 1 Remove existing mechanical digital lock

Step 2 Drill single 16mm (5/8”) hole for cable

Step 3 Fit CL2000 on door using existing fixings

Retrofit completed!

Technical information on page 36 10



CL4000 is a medium duty electronic Codelock offering all the functions of the

CL2000, but with the benefit of full size lever handles which allow it to be used as the primary lock on doors.


Set new User Code





Change Master Code


Allows up to 80 User Codes 4, 5 or 6 digits long

On door programming via Master Codes





Tamper alarm and low battery warning

Connections for remote release by reception desk button, and alarm release included

Code Free entry mechanically by key or electronically from the keypad

Front change cylinder

CL4000


CL4010 Mortice Latch with Knob

The CL 4010 is also available with a knob option

CL4020 Mortice Lock with Key Override

Code lockout by deadbolt operation and safety feature to prevent accidental lock-ins


(front view)

12



(inside view)


17/2/10 09:19:15


CL5000 is a heavy duty electronic Codelock with full size lever handles for use in high traffic applications. The stylish, contemporary design incorporates all the features of the CL2000 and CL4000 in a larger, more robust assembly.


Set new User Code





Change Master Code


Allows up to 80 User Codes 4, 5 or 6 digits long

On door programming via Master Codes





Tamper alarm and low battery warning

Connections for remote release by reception desk button, and alarm release included

Code Free entry mechanically by key or electronically from the keypad

Front change cylinder

CL5000


CL5010 Back to Back

(inside view)

CL5020 Mortice Lock with Key Override

Code lockout by deadbolt operation and safety feature to prevent accidental lock-ins


(front view)

14



(inside view)


17/2/10 09:19:22

Codelocks Mechanical Range

The mechanical codelocks range starts with light duty locks with a comprehensive range of functions through to heavy duty locks suitable as the primary lock on most doors. Mechanical locks have a single code that can be changed prior to installation or by removing the lock from the door.*

Typical features include:

Single code

Typically over 8,000 usable code combinations

Code change off door*

Easy fit

Code free option available

Available in knob or lever handle


*600 series allows for on door code change

16



This entry level lock provides a comprehensive range of functions for light duty entry control, for inner office doors, storage rooms or cupboards in commercial premises, sheds, garage-to-house doors or cupboards at home.

Available in 4 functions to suit a wide variety of applications, and in 2 finishes, the

CL100 locks offer excellent value for money. Delivered with random, unrecorded codes, simply change the code by following the clear instructions provided.

Installation couldn’t be simpler either – just drill one hole for the spindle, two holes for the fixing bolts and one extra if a mortice latch is required.

Simple convenient control

Easy to fit

Available in 4 functions

Choice of 3 sizes of latch

Code changes in minutes

Our best value Codelock

Tumbler alignment for easy code change

Dual backplate allows option of hold open or non hold open function (CL155)

For internal and external use

CL100

Front plate is common to all functions


Silver Grey finish only

18


CL155 Mortice Latch

With Dual backplate

CL190BB Mortice Latch

Back to Back

Silver Grey finish only


17/2/10 09:19:34


This premium range of light duty locks offers 5 functions in 2 PVD finishes, all of which are available with key override as an option. Multiple locks can be supplied keyed alike.

Codelock CL200 is suitable for a wide range of light duty entry control applications, in offices, warehouses, laboratories and around the home.

All products feature a bevelled hexagonal handle, tumbler alignment for easy code changing, and durable PVD (Physical Vapour Deposition) finishes. As with all

Codelocks, installation and code changing are simple, thanks to the easy to follow, clear instructions supplied.


Available in 5 functions

Easy to fit

Hexagonal bevelled handle and lock case

Tumbler alignment for easy code change

Key bypass option may be specified on any function

Dual backplate allows option of hold open or non hold open function (CL255)


CL200


Key Override option is available on all functions

Stainless Steel finish only


CL210 Mortice Deadbolt

20


CL255 Mortice Latch

With Dual backplate

CL290 Back to back


Note – optional key, one side only


17/2/10 09:19:42


This is a medium duty range with full size lever handles, allowing use as the primary lock on doors where a knob-operated lock would be unsuitable.

The functions available allow for various ways of managing entry by code, by key and by Code Free operation of the lever handle on the CL405, CL415 and

CL425 models.

Throwing the deadbolt of the CL420/425 models will lock out the code users when appropriate. A safety feature ensures that the inside lever handle will retract the deadbolt so avoiding accidentally locking a person in the room.

The key can be used to retract the latchbolt and so may be issued for cleaning and security staff use.

Codelock CL400 can also be supplied as front and back plates only, for use with customer’s own installed mortice locks, making it an ideal economic solution for high traffic door control in health, educational and other institutional premises.

Medium duty Codelock


Full size lever handles

Outside lever has a slipping clutch to avoid damage to the mechanism if forced

Easy code change as often as required

Code Free option available

Mortice lock and mortice latch functions


CL400


CL400 Plates Only

Utilising existing door lock or latch

CL405 plates only

As CL400 with Code Free entry option

CL420 Mortice Lock

With safety feature

CL425 Mortice Lock

With safety feature and

Code Free entry option

22


CL410 Mortice Latch

(inside view)

CL415 Mortice Latch

With Code Free entry option


May be specified as Back to Back

(BB) to provide coded access in both directions


17/2/10 09:19:47


This is a heavy duty range with full size lever handles, allowing use as the primary lock on most doors, particularly in high traffic situations.

The functions available allow for various ways of managing entry by code, by key and by Code Free operation of the lever handle on the CL505, CL515 and

CL525 models.

Throwing the deadbolt of the CL520/525 models will lock out the code users when appropriate. A safety feature ensures that the inside lever handle will retract the deadbolt so avoiding accidentally locking a person in the room. The key can be used to retract the latchbolt and so may be issued for cleaning and security staff use.

Heavy duty Codelock


Full size lever handles

Outside lever has a slipping clutch to avoid damage to the mechanism if forced

Easy code change as often as required

Code Free option available

Mortice lock and mortice latch functions

Ball shape knob available for all versions except for 520/525 versions


CL500


CL510 Mortice Latch

CL515 Mortice Latch with Code Free entry option

CL500* Plates Only


CL500* BB Back to Back Plates

For use with existing door lock or latch


CL505* Plates Only


CL520 Mortice Lock

With safety feature

CL525 Mortice Lock

With safety feature and code free entry option

* image not shown

24



May be specified as Back to

Back (BB) to provide coded access in both directions


CL500 Panic Kit

Coded front plate only with extra long spindle to work with most single point panic pads or bars (not supplied)


17/2/10 09:19:54

26


The new heavy duty CL600 range incorporating the new Quick Code system allows on door code change in seconds. Typically most mechanical digital locks require removal from the door or at least to be partly disassembled to change the code. Not now!

The CL600 Quick Code system brings significant advantages to commercial users such as hospitals, schools and local authorities. In fact any business that needs to be in control of coded access on multiple doors, simply and quickly.

Quick Code allows the keyholder to change the code from the front of the door.

The key supplied is also able to open the door without the code if required. Locks can be supplied as keyed alike on request.

Heavy duty Codelock

On door code change in seconds

Supplied non-handed

Key override standard feature

Over 8000 code combinations

Full size lever handle or ball shape knob available except for 620/625 versions

Front change key cylinder


PVD weather resistant,

low maintenance finish

CL600


CL610 Mortice Latch

(inside view)

CL615 Mortice Latch with Code Free entry option


May be specified as Back to

Back (BB) to provide coded access in both directions

Brushed Steel finish only

CL620 Mortice Lock

With safety feature

CL625 Mortice Lock

With safety feature and code free entry option

CL600* Plates Only


CL600* BB Back to Back Plates

For use with existing door lock or latch. Brushed Steel finish only

CL605* Plates Only


* image not shown

How to Quick Code

Change code in 3 steps

CL600 Panic Kit

Coded front plate only with extra long spindle to work with most single point panic pads or bars (not supplied)

1. Turn key fully anticlockwise.

2. To select any button as part of code, turn button clockwise.

3. Remove key.

Quick Code completed!



Codelocks CL0460

Narrow Stile Codelock for Aluminium doors

The narrow stile Codelock is an affordable alternative to electronic keypads, electric strikes, magnetic locks and other systems used on aluminium framed doors. There have been limited mechanical digital lock options for this market, until now.

The narrow stile Codelock is a medium duty mechanical Codelock suitable for use with aluminium doors. The lock is ideal for new or retrofit applications. Designed to be retrofitted to Adams Rite or similar style ANSI round cylinder mortice deadlatches. As usual Codelocks have designed the product so everything required to fit the lock to the door (including cams) is in the box, making ordering and fitting very easy.

Non handed – suitable for left or right hand hung doors, makes ordering/fitting very simple

Full size lever handles standard, ball shape knobs available

Easy installation


Includes cams and fixing tabs

Designed to be retrofitted to Adams Rite or similar style ANSI round cylinder mortice deadlatches – not supplied

The narrow stile mechanical Codelock provides access control in the following ways:

By code via the keypad

By key which can override the code and retract the latch

The key can also be used to lock out code users Code Free operation can be selected with the 0465 and 0475 models


28



17/2/10 09:20:04

30


Technical Specifications

17/2/10 09:20:11

Cabinet Lock CL1000


Power

Operations

Low battery

2 x 1.5v AAA cells

15,000 openings.

The lock will signal low battery to the user via the red LED flashing. The lock will open

100 more times after this signal is initiated. The non-volatile memory retains settings when batteries are changed.

Battery failure override

The Cabinet Locks have been designed so an external PP3 battery can be placed against the external contacts and using master code to gain entry.

External dimensions

Length 136mm (5 3 / 8 ”) x width 32mm (1 depth 30mm (1 3 /

16

”) to top of handle.

1 / 4 ”) x

Material Zinc Alloy

Buttons Dual epoxy coated buttons

Cam fixing point 8mm ( 5 /

16

”) square

Door thickness CL1004 - 6mm, 1 /

4

” or less

CL1005 - 12mm, 1 /

2

” or less

(standard)

CL1006 - 18mm, 3 /

4

” or less

CL1007 - 24mm, 1” or less

Finish Silver Grey

IP rating IP54 (when fitted with optional gasket)

For internal use

2

CODES

Programming information

The Cabinet Lock has three code levels available:

i) Master Code ii) Sub-Master Code iii) User Code

The Cabinet Lock is supplied with two factory set codes:

Master Code: 11 33 55 77

User Code: 22 44

• When fitted immediately change the Master

Code and User Code.

• All Master Codes and Sub-Master Codes are 8 digits long – 100,000,000 code permutations.

• All User Codes are 4 digits long – 10,000 possible code permutations

• The lock ‘open’ time is set at 4 seconds.

FUNCTIONS

Before programming select the most appropriate function for the application.

A) Repeat code mode

Important Note: This is the default function and is already pre-programmed in new locks. This is the most common function and is used where the same code will be repeatedly used.

B) Single use code mode (locker mode)

The User enters a single use code which will lock and then open the lock once only and then be erased. This function is used for short term, multi occupancy applications e.g. a locker in leisure centre. The lock will now remain open until the next single use code is entered into the lock

1 Cabinet lock

2 Upper fixing bolt x 2

3 Packer pieces x 2

4 Locking nut

5 Cams x 2

6 Cam fixing bolt

• Batteries – 2 x 1.5V AAA

• Template x 1

1

6 5 4 3

32


CL1000

OPERATING INSTRUCTIONS

Note: The Cabinet Lock has a 10 button keypad and a #. The # is used when programming and is found behind the handle

The lock has the following code levels:

Master Code can:

Open the lock

Change the Master Code

Set / Change / Delete the Sub-Master and

User Code, Select between repeated use and single use codes and Restrict the locked time.

Sub-Master Code can:

Open the lock

Change the Sub-Master

Set / Change / Delete the User Code

User Code can:

Open the lock

Change the User Code

A same code cannot be programmed into more than one level

17/2/10 09:20:13

Cabinet Lock CL1200


Power

Operations

Low battery

2 x 1.5v AAA cells

80,000 openings.

The lock will signal low battery to the user via the red LED flashing. The lock will open

100 more times after this signal is initiated. The non-volatile memory retains settings when batteries are changed.

Battery failure override

The Cabinet Locks have been designed so an external PP3 battery can be placed against the external contacts and using master code to gain entry.

External dimensions

Length 141mm (5 3 / 8 ”) x width 41mm (1 x depth 38mm (1 1 /

2

”) to top of handle.

5 / 8 ”)

Material Zinc Alloy

Cam fixing point 8mm ( 5 /

16

”) square

Door thickness The CL1200 is supplied with 4 spindles to suit door between

¼” or less up to 1” or less.

See item 4.

Buttons

Finish

Individual stainless steel buttons. Audible button press.

Silver Grey

Auto-unlock feature: The lock can be programmed via the master code to auto open after a preset time, 2, 4, 6, 8, 12 hours (locker mode only).

IP rating IP54 (when fitted with optional gasket)

For internal use.

CODES

Programming information

The Cabinet Lock has three code levels available:

i) Master Code ii) Sub-Master Code iii) User Code

The Cabinet Lock is supplied with two factory set codes:

Master Code: 11 33 55 77

User Code: 22 44

• When fitted immediately change the Master

Code and User Code.

• All Master Codes and Sub-Master Codes are 8 digits long – 100,000,000 code permutations.

• All User Codes are 4 digits long – 10,000 possible code permutations.

• The lock ‘open’ time is set at 4 seconds.

FUNCTIONS

Before programming select the most appropriate function for the application.

A) Repeat code mode

Important Note: This is the default function and is already pre-programmed in new locks. This is the most common function and is used where the same code will be repeatedly used.

B) Single use code mode (locker mode)

The User enters a single use code which will lock and then open the lock once only and then be erased. This function is used for short term, multi occupancy applications e.g. a locker in leisure centre.

The lock will now remain open until the next single use code is entered into the lock

3

1 Cabinet lock

2 Gasket

3 Upper fixing bolts x 3 (1 spare)

4 Cam spindles x 4

5 Cams x 2

6 Cam fixing bolt

2

1

5

4

6

34


CL1200

41mm (1 5 /

8

”)

OPERATING INSTRUCTIONS

Note: The Cabinet Lock has a 10 button keypad and a CODELOCKS.COM button. This is used when programming and is found behind the handle.

The lock has the following code levels:

Master Code can:

Open the lock

Change the Master Code

Set / Change / Delete the Sub-Master and

User Code, Select between repeated use and single use codes and Restrict the locked time.

Sub-Master Code can:

Open the lock

Change the Sub-Master

Set / Change / Delete the User Code

User Code can:

Open the lock

Change the User Code

A same code cannot be programmed into more than one level

17/2/10 09:20:15



Door thickness 35mm - 65mm (1 3 /

8

”-2 1 /

2

”)

Spindle type Flat bar spindle

Non handed Lock will fit doors hung on the left or right

Latch

Light duty with stainless steel latchbolt head, with “anti-shim” plunger, 60mm (2 3 /

8

”) backset requires 25mm(1”) hole, 82mm (3 1 / 4 ”) deep.

Also available to order:

– 50mm (2”) backset latch requiring 25 x 72mm

(1” x 2 7 /

8

”) hole or

– 70mm (2 3 /

4

”) backset latch requiring

25 x 92mm (1” x 3 5 /

16

”) hole.

Spindle adaptor

Lock is supplied with an 8mm spindle adaptor allowing it to be used with existing 8mm ( 5 /

16

”) square follower latches

Body material Zinc alloy

Buttons Individual, stainless steel

Operations 80,000

Low battery warning

Red LED will flash on opening to indicate batteries need to be changed.

Finishes available

PVD (Physical Vapour Deposition) hardwearing low maintenance finishes BS (brushed steel) and PB (polished brass).

REM 1 Lock fitted as standard with remote release (REM1) terminal. This can be used to open the lock via remote wired switch (not supplied)

REM 2 Lock fitted as standard with remote alarm release (REM2) terminal. This can be used when linked to an alarm system to activate (via maintained or momentary contact) the lock to the open state for 30 minutes.

Codes

• Codes may be 4, 5 or 6 digits long. Providing a possible 1,110,000 code combinations.

• The lock memory will store 80 different User

Codes.

• The lock memory can store 10 different One

Time User Codes.

Code Free Code free mode can be set via the keypad

Key override As standard the lock has a key override function

Keying alike Locks can be supplied as keyed alike on request

Battery override Should batteries fail and key is misplaced lock can be opened by attaching a

PP3 battery to contact points and entering the

Master code

Batteries

2 x 1.5 v AA Cells

For internal use.

CL2255 with gasket – wxh:

46mm (1 4 /

5

”) x 148mm (5 7 /

8

”)

Front Depth off door: 62mm (2 1 /

2

”)

CL2255 Tubular Mortice Latch

Outside knob will not turn unless a valid code is entered. Spring latch will automatically lock the door when closed

CL2200

CL2200 Surface Deadbolt

Bolt slides on inside surface of door to lock or unlock. Bolt is moved manually by means of the outside knob after code input and freely by the inside knob at all times. A surface mounted keep is provided. Stainless Steel finish only.

CL2210 Mortice Deadbolt NOT ILLUSTRATED

Sizes as CL2255. Bolt extends 25mm (1”) beyond door edge when locked.

Programming Options

01 - Enter new User Code

02 - Suspend User Code

03 - Restore User Code

04 - Suspend all User Codes

05 - Restore all User Codes

06 - Set unlock time

07 - One-time User Codes

08 - Set Code Free mode

09 - Cancel Code Free mode

10 - Change Master Code

11 - Cancel emergency open

12 - Delete all User Codes

13 - Set or change Sub-Master Code

14 - Delete Sub-Master Code

15 - LED locked / unlocked status

36





8

”-2 1 /

2

”)

Spindle type 8mm ( 5 /

16

”) spring loaded spindle



Mortice Latch (CL4010)

Medium duty, stainless steel latchbolt head with

“anti” shim deadlocking plunger, 8mm ( 5 /

16

”) follower.

60mm (2 3 /

8

”) backset, requires 25mm (1”) hole,

82mm (3 1 /

4

”) deep.

70mm (2 3 /

4


92mm (3 5 /

16

”) deep.

Mortice Lock (CL4020)

Euro profile mortice sash lock with deadbolt and latchbolt. Complete with double cylinder to control deadbolt and to retract latchbolt. With the deadbolt locked it denies access to a code user. The key can be used to open doors for management functions such as security and cleaning. The split follower enables the inside lever to retract the deadbolt and latch to prevent accidental lock in when the deadbolt is thrown.

Keypad

Buttons

Operations

2 x 5

Individual, stainless steel.

200,000




PVD (Physical Vapour Deposition) hardwearing low maintenance finishes SS (stainless steel) and PB (polished brass).


REM 2 Lock fitted as standard with remote alarm release (REM2) terminal. This can be used when linked to an alarm system to activate the lock to the open state for 30 minutes.

Codes


• The lock memory will store 80 different

User Codes,

• The lock memory can store 10 different

One Time User Codes.

Code Free mode can be set electronically at the keypad or mechanically by means of the override key.



Key cylinder change From lock front (5 pin)

Storeroom function Locks fitted with storeroom function tailpiece as standard. i.e. latch can be retracted by key when turned.

Classroom function Classroom function tailpiece supplied to allow (when fitted) lock to be left in code free mode when key is removed

Batteries 4xAA Cells.

For internal and external use.

















38


CL4010

30mm

(1 3

/

16

”)

Front depth off door: 70mm (2 3 /

4

”)

CL4010 Mortice Latch

Outside lever turns freely without operating the latchbolt. When valid code is entered and blue light burns, the lever will retract the latchbolt. When the door closes the spring latch will automatically lock the door. The key will open the door for management functions.

The key may be used to set the lock into Code

Free mode so that anyone can open the door without using a code. Code Free mode can also be programmed at the keypad using the

Master Code.

CL4020

CL4020 Full Mortice Lock with Safety Feature

Outside lever and key functions as CL4010.

Lockcase key retracts latchbolt for entry without using a code. Key controls the deadbolt position. When deadbolt is projected it denies access by code. When deadbolt is projected the safety feature allows the inside lever handle to retract the deadbolt and the latchbolt, preventing people being accidentally locked in.

17/2/10 09:20:19




8

”-2 1 /

2

”)

Spindle type 8mm ( 5 /

16




Mortice Latch (CL5010)



16

”) follower.

60mm (2 3 /

8


82mm (3 1 /

4

”) deep.

70mm (2 3 /

4


92mm (3 5 /

16

”) deep.

Mortice Lock (CL5020)

Euro profile mortice sash lock with deadbolt and latchbolt. Complete with double cylinder to control deadbolt and to retract latchbolt. With the deadbolt locked it denies access to a code user. The key can be used to open doors for management functions such as security and cleaning. The split follower enables the inside lever to retract the deadbolt and latch to prevent accidental lock in when the deadbolt is thrown.

Keypad

Buttons

Operations

3 x 4

Individual, stainless steel.

200,000






REM 2 Lock fitted as standard with remote alarm release (REM2) terminal. This can be used when linked to an alarm system to activate the lock to the open state for 30 minutes.

Codes


• The lock memory will store 80 different

User Codes,

• The lock memory can store 10 different

One Time User Codes.

Code Free mode can be set electronically at the keypad or mechanically by means of the override key.




Storeroom function Locks fitted with storeroom function tailpiece as standard. ie latch can be retracted by key when turned.

Classroom function Classroom function tailpiece supplied to allow (when fitted) lock to be left in code free mode when key is removed

Batteries

4xAA Cells.


















40


CL5010


4

”)


Outside lever turns freely without operating the latchbolt. When valid code is entered and blue light burns, the lever will retract the latchbolt. When the door closes the spring latch will automatically lock the door. The key will open the door for management functions.

The key may be used to set the lock into Code

Free mode so that anyone can open the door without using a code. Code Free mode can also be programmed at the keypad using the

Master Code.

CL5010BB Back to Back

(for internal use only)

CL5000 locks may be ordered with 2 keypad plates for installation on both sides of the door to provide coded access in both directions.

CL5020

120mm


Outside lever and key functions as CL5010.

Lockcase key retracts latchbolt for entry without using a code. Key controls the deadbolt position. When deadbolt is projected it denies access by code. When deadbolt is projected the safety feature allows the inside lever handle to retract the deadbolt and the latchbolt, preventing people being accidentally locked in.

17/2/10 09:20:22




8

”-2 1 /

2

”)

Spindle type Flat spring loaded spindle



Latch


8

”) backset requires 25mm(1”) hole, 82mm (3 1 /

4

”) deep.



(1” x 2 7 /

8

”) hole or

– 70mm (2 3 /

4


25 x 92mm (1” x 3 5 /

16

”) hole.

Codes

8,191 non sequential codes available

Code storage

Single code

Code change method

Requires removal of lock from door

Neoprene seals are included on both sides to provide friction against the face of the door and to avoid damage from overtightening of the fixing bolts.



Silver Grey or polished brass

CL100

Code front common to all models

CL100


Bolt slides on inside of the door, to lock or unlock.

Bolt is moved manually by means of the outside knob after code input and freely by the inside knob at all times. A surface mounted and mortice keep are provided. Silver Grey finish only.

CL155

CL155 Mortice latch

As standard supplied with ‘Hold open’ function allowing free entry when required without operating the code. Function can be disabled on installation requiring code to be entered every time to open door.

CL190 BB

CL190 Back to Back

The CL190 BB mortice latch is supplied with two code plates to provide coded access in both directions

42





8

”-2 1 /

2

”)

Spindle type Flat spring loaded spindle



Latch


8

”) backset requires 25mm (1”) hole, 82mm (3 1 /

4

”) deep.



(1” x 2 7 /

8

”) hole or

– 70mm (2 3 /

4


25 x 92mm (1” x 3 5 /

16

”) hole.

Codes


Code storage

Single code



Neoprene seals are included on both sides to provide friction against the face of the door and to avoid damage from overtightening of the fixing bolts.



PVD (Physical Vapour Deposition) hard wearing low maintenance finishes SS (stainless steel) and PB (polished brass).

CL200

Code front common to all models

CL210 Mortice Deadbolt NOT ILLUSTRATED

Sizes as CL255. Bolt extends 25mm (1”) beyond door edge when locked.

CL200


Bolt slides on inside surface of door to lock or unlock. Bolt is moved manually by means of the outside knob after code input and freely by the inside knob at all times. A surface mounted keep is provided. Stainless Steel finish only.

44


CL255

CL255 Mortice latch

As standard supplied with ‘Hold open’ function allowing free entry when required without operating the code. Function can be disabled on installation requiring code to be entered every time to open door.

CL290 BB

CL290 Back to Back

The CL290 BB mortice latch is supplied with two code plates to provide coded access in both directions.

Key Override

Any of the CL200 functions may be ordered with key override. Locks may be keyed alike if required. Stainless Steel finish only.

Cylinders may be ordered keyed alike on request.

17/2/10 09:20:28




8

”-2 1 /

2

”)

Spindle type 2 part 8mm ( 5 /

16




Mortice Latch (CL410 & CL415)



16

”) follower.

60mm (2 3 /

8


82mm (3 1 /

4

”) deep.

70mm (2 3 /

4


92mm (3 5 /

16

”) deep.

Mortice Lock (CL420 & CL425)

Euro profile mortice sash lock with deadbolt and latchbolt. Complete with double cylinder to control deadbolt and to retract latchbolt.

With the deadbolt locked it denies access to a code user. The key can be used to open doors for management functions such as security and cleaning. The split follower enables the inside lever to retract the deadbolt and latch to prevent accidental lock in when the deadbolt is thrown. Supplied with double euro profile cylinders with three keys. May be ordered keyed alike.

Code Free access option via keypad on models

CL405, CL415 & CL425.

Codes


Code storage

Single code





Neoprene seals are included on both sides to provide friction against the face of the door and to prevent damage from over tightening of the fixing bolts. The outside lever handle has a slipping clutch to prevent damage to the lock if the handle is forced.


CL410

CL415


3

”)


Outside lever handle will retract the latch after a correct code is entered. The spring loaded latchbolt will lock automatically when the door is closed.


As CL410 with Code Free access option on keypad. In Code Free mode the outside lever will retract the latchbolt without using a code.

46


CL400 Front & backplates only

NOT ILLUSTRATED

For use with existing lock or latch.

CL405 Front & backplates only

NOT ILLUSTRATED

With Code Free access, for use with existing lock or latch.

NB: For CL400 & CL405 existing lock must have 22mm ( 7 / 8 ”) fixing hole below follower

(spindle).

CL420

CL425


Outside lever handle will retract the latch after a correct code is entered. The spring loaded latchbolt will lock automatically when the door is closed. Key retracts latchbolt for entry without using a code. Key controls deadbolt position. When deadbolt is projected it denies access by code. When deadbolt is projected the safety feature allows the inside lever handle to retract the deadbolt and the latchbolt, preventing people being accidentally locked in.

CL425 Full Mortice Lock with Safety

Feature

As CL420 with Code Free access function on the keypad. In Code Free mode the outside lever will retract the latchbolt without using a code.

Back to Back

NOT ILLUSTRATED The CL410 (Mortice Latch) may be ordered with two keypad plates for installation on both sides of the door to provide coded access in both directions. Stainless

Steel finish only

17/2/10 09:20:30




8

”-2 1 /

2

”)


16





Medium duty, stainless steel latchbolt head with “anti” shim deadlocking plunger, 8mm

( 5 /

16

”) follower.

60mm (2 3 /

8


82mm (3 1 /

4

”) deep.

70mm (2 3 /

4


92mm (3 5 /

16

”) deep.





CL505, CL515 & CL525.

Codes


Code storage

Single code







CL510

CL515





48


CL500 & CL505 Front & backplates only

NOT ILLUSTRATED

For use with existing lock or latch.

NB: For CL500 & CL505 existing lock must have either a fixing hole (22mm 7 /

8

”) below follower (spindle) or two horizontal holes either side of the follower (38mm 1 1 /

2

” centres)

CL500PK Panic Device Access Kit

NOT ILLUSTRATED

Keypad plate only, supplied with an extra long spindle to work with most exit devices with

8mm (5/16”) square followers.

Stainless Steel finish only.

CL520

CL525


12

”)





Back to Back

NOT ILLUSTRATED

The CL500 and the CL510/CL515 (Mortice

Latch) may be ordered with two keypad plates for installation on both sides of the door to provide coded access in both directions

Stainless Steel finish only.

17/2/10 09:20:32




8

”-2 1 /

2

”)


16







16

”) follower.

60mm (2 3 /

8


82mm (3 1 /

4

”) deep.

70mm (2 3 /

4


92mm (3 5 /

16

”) deep.





CL605, CL615 & CL625.

Codes


Code storage

Single code


On door via key



PVD (Physical Vapour Deposition) hardwearing low maintenance finishes BS (brushed steel) and PB (polished brass).





CL600

CL605

185mm

(7 1 /

4

”)

CL610

CL615

58mm

(2 5 /

16

”)

110mm

(4 5 /

16

”)





60mm

(2 3 /

8

”)

58mm

(2 5 /

16

”)

50


CL600 & CL605 Front & backplates only

NOT ILLUSTRATED

For use with an existing lock or latch.

NB: For CL600 & CL605 existing lock must have either a fixing hole (22mm 7 /

8

”) below follower (spindle) or two horizontal holes either side of the follower (38mm 1 1 /

2

” centres)

CL600PK Panic Device Access Kit

NOT ILLUSTRATED

Keypad plate only, supplied with an extra long spindle to work with most exit devices with

8mm ( 5 /

16

”) square followers. Stainless Steel finish only.

CL620

CL625

25mm (1”)

58mm

(2 5 /

16

”)

72mm

(2 7 /

8

”)

55mm

(2 3 /

16

”)

84mm

(3 5 /

16

”)


2

”)





Back to Back

NOT ILLUSTRATED

The CL600 and the CL610/CL615 (Mortice

Latch) may be ordered with two keypad plates for installation on both sides of the door to provide coded access in both directions.

Brushed steel finish only.

17/2/10 09:20:34



Suitable for use with aluminium doors.

Designed to be retrofitted to Adams Rite or similar style ANSI round cylinder mortice deadlatches (not supplied).



Codes 8,191 non sequential codes available

Code storage single code


Keying alike Locks can be keyed alike on request



PVD (Physical Vapour Deposition) hardwearing low maintenance finish

SS (stainless steel)

CL460

CL460

Codes: All our mechanical locks are supplied with a random code commencing with the ‘C’ clear button.

To change the code after fitting, the lock must first be removed from the door.

The code is non sequential, that is the code can be entered in any order e.g.

1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 13 buttons a total of 8,191 different codes are available, any of which may be entered in any order.

52


CL0460L

Narrow stile Codelock complete with cams and threaded cylinder and lever handles.

CL0465L

Narrow stile Codelock complete with Code

Free function, cams and threaded cylinder and lever handles.

CL0470L

Narrow stile Codelock complete with cams and euro profile cylinder and lever handles.

CL0475L

Narrow stile Codelock complete with Code

Free function, cams and euro profile cylinder and lever handles.

L = Lever handle supplied as standard

Ball shape knob option available for each product

17/2/10 09:20:36

www.codelocks.com

Service & Spares

Codelocks will repair, service or replace any lock free of charge should a manufacturing fault develop. Simply call us, or email details of the problem and we will do the rest.

Codelocks fully dedicated website offers technical information and support including information on code changing and installation. Spares for locks are also available, click on the spares page from the home page.

Quick translation of the whole site from the home page; French, Spanish, Italian,

German, Dutch and Chinese.

Download this brochure too!

54


Helpline, Service & Spares

UK/Europe

Freephone: 0800 393405

Tel: +44 (0)1635 239645

Email: [email protected]

Web: www.codelocks.co.uk

Americas

Toll free: 1.877.codelock

Tel: +1 714 979 2902

Email: [email protected]

Web: www.codelocks.us

Maintenance No maintenance of the working parts is necessary. Do not oil. To maintain the finish the lock should be cleaned regularly with a soft cloth. A silicone spray or similar should be used to provide a protective film against grit and grime.

Aftercare It is strongly recommended to undertake a regular maintenance schedule and wipe the outer surface of all Codelocks products fitted externally with a silicone based spray to help keep the products clean and encourage the displacement of water. DO NOT use oil based lubricants as these will attract dirt.

17/2/10 09:20:37

UK Headquarters

CODELOCKS LTD

Castle Industrial Park,

Kiln Road,

Newbury,

RG14 2EZ

UNITED KINGDOM

Tel: +44 (0) 1635 239645

Fax: +44 (0) 1635 239644 [email protected]

www.codelocks.com

CODELOCKS USA

2930-B College Avenue,

Costa Mesa,

CA 92626

USA.

Tel: +1 714 979 2900

Fax: +1 714 979 2902 [email protected]

www.codelocks.us

We are proud to be associated with the Master Locksmith

Association and The Guild of Architectural Ironmongers.

56

Codelocks2010-A5-Inner.indd 56 17/2/10 09:20:37

CODELOCKS | 5OOO ELECTRONIC | User manual | Codelock Digital Locks

Codelocks Electronic Range

Codelocks Mechanical Range

Codelocks Electronic Range

Codelocks Cabinet Lock CL1000

For Cupboards, Cabinets and Lockers

Codelocks Cabinet Lock CL1200

For Cupboards, Cabinets and Lockers

Codelocks CL2000 Range

Rapid Retrofit

Retrofit completed!

Codelocks CL4000 Range

Codelocks CL5000 Range

Codelocks Mechanical Range

Codelocks CL100 Range

Codelocks CL200 Range

Codelocks CL400 Range

Codelocks CL500 Range

Codelocks CL600 Range

How to Quick Code

Codelocks CL0460

Narrow Stile Codelock for Aluminium doors

Technical Specifications

Cabinet Lock CL1000

Technical Specifications

Cabinet Lock CL1200

Technical Specifications

Codelocks CL2000 Range

Technical Specifications

Codelocks CL4000 Range

Technical Specifications

Codelocks CL5000 Range

Technical Specifications

Codelocks CL100 Range

Technical Specifications

Codelocks CL200 Range

Technical Specifications

Codelocks CL400 Range

Technical Specifications

Codelocks CL500 Range

Technical Specifications

Codelocks CL600 Range

Technical Specifications

Codelocks CL0460 Range

Technical Specifications

www.codelocks.com

Service & Spares

Helpline, Service & Spares

UK/Europe

Americas

UK Headquarters

Related manuals

Abus

300101013000

CodeLock

CL5000 electronic

PawHut

D30-725V80GY

CL250

Abus

300101003000

Abus

300101005003

Abus

300101005005