Trendnet RB-TEW-807ECH AC1200 High Power Wireless Dual Band PCIe Adapter User's Guide

TRENDnet User’s Guide

Cover Page


Contents

Product Overview ........................................................................... 1

Package Contents .......................................................................................................... 1

Features ......................................................................................................................... 1

Product Hardware Features........................................................................................... 2

System Requirements .................................................................................................... 2

Application Diagram ...................................................................................................... 3

Installing your Wireless Adapter ...................................................... 4

Connect to your wireless network using WPS .................................. 9

Technical Specifications................................................................. 11

Troubleshooting ............................................................................ 13

Appendix ...................................................................................... 14

Table of Contents

© Copyright 2015 TRENDnet. All Rights Reserved. i


Product Overview

TEW-807ECH

Package Contents

In addition to your wireless adapter, the package includes:



CD-ROM (Drivers)



Multi-Language Quick Installation Guide



2 x High Gain Detachable Dual Band Antennas





1 x Magnetic Antenna Base with 1 m (3.3 ft) extension cable

Standard & Low Profile Brackets

If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased.

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-807ECH

Features

TRENDnet’s AC1200 High Power Wireless Dual Band PCIe Adapter, model TEW-807ECH, upgrades a standard or low profile Windows

®

tower computer to Wireless AC1200.

Quickly connect to a high performance Wireless AC network at 867 Mbps or to a

Wireless N network at 300 Mbps. A high power 500 mW radio with detachable 5 dBi antennas increase wireless coverage. A convenient 1 m (3.3 ft.) extension cable and a magnetic mounting base provide installation flexibility.

Easy Setup

Get up and running in minutes with the intuitive guided setup

AC1200 Dual Band

Connect to an extreme performance 867 Mbps Wireless AC or 300 Mbps Wireless N network*

Wireless Coverage

Extended wireless coverage with high power 500 mW radio and detachable 5 dBi antennas

PCIe Slot

PCI Express slot (1x)

Heat Sink

Heat sink minimizes heat loading and optimizes processing performance

Tower Brackets

Includes standard and low profile tower brackets

Extension Cable

Convenient 1 m (3.3 ft.) extension cable provides installation flexibility

Magnetic Base

Adjustable magnetic mounting base attaches to the side of a tower computer or other metal surface

LED Indicator

LED indicator conveys device status

Operating Systems

Compatible with Windows operating systems

* Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications.

Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For maximum performance of up to 867Mbps, connect to an 867 Mbps 802.11ac wireless router or access point.

1


Product Hardware Features

Low Profile

Bracket

Activity LED

Indicator

Extension Cable

Connectors

Detachable High

Gain Antenna

Magnetic

Mounting Base

PCIe 1x

Interface

Detachable High

Gain Antenna

TEW-807ECH



PCIe 1x Interface – The PCIe interface connects your adapter to PCIe slots on your computer.



Activity LED Indicator –The LED will blink rapidly to indicate WPS has been activated. The LED will blink every 5 sec. when disconnected. When connected, the

LED will blink rapidly during wireless data transmission.



Detachable High Gain Antennas – The high gain antennas can be connected to the external mounting base for flexible and optimized antenna placement or connected directly to the antenna connectors on the adapter.



Mounting Base – It is recommended to attach the antennas to the external mounting base to achieve the best possible placement and wireless coverage. The mounting base is also magnetic and can attach to metallic surfaces. When using the mounting base, the extension cable connectors will be connected to the antenna connectors located on the adapter.



Low Profile Bracket – The low profile bracket can be used to install the adapter on low profile computer towers.

System Requirements



Windows® 8.1, 8, 7, Vista, or XP



Available PCIe slot on your computer.



CD-ROM Drive (Utility and Driver Installation with included CD)


2


Application Diagram

TEW-807ECH

The AC1200 High Power Wireless Dual Band PCIe Adapter can provide wireless AC or wireless N connectivity through the use of an available PCIe slot on your computer to a wireless AC/N network (router/access point). The external mounting base allows for flexible and optimal antenna placement to achieve the best possible wireless coverage and connectivity


3


Installing your Wireless Adapter

This section describes how to install the software driver for the wireless adapter.

1. Insert the included CD-ROM into your computer’s CD-ROM drive.

Note: If you do not have the included CD-ROM, you can download the utility and drivers

from

http://www.trendnet.com/downloads/ .

3. At the installation window, click Next.

TEW-807ECH

2. At the CD Autorun Prompt window, click Run Autorun.exe.

Note: If the Autorun prompt does not appear automatically, open the CD contents and double-click Autorun.exe.

At the CD-ROM main menu, click Install Drivers.


4


4. You will be prompted to accept the end user license agreement. Select I accept the

terms of the license agreement and click Next.

TEW-807ECH

5. Wait for the utility and drivers installation to complete. This may take a few minutes.

Note: If you do not receive a security prompt, continue to the next step. If prompted, click Install this driver software anyway.


5


6. After the process is completed, click Finish. 8. Please shut down your computer.

TEW-807ECH


9. Locate an available PCIe slot inside of your computer. Insert the adapter into the available PCIe slot.

6


10. Attach the high gain detachable antennas to the antenna connectors on the mounting base and attach the extension cable connectors from the mounting base to the antenna connectors on the adapter. It is recommended to place the mounting base at the highest point possible (ex. table top or on top of the computer tower) and position the antennas at opposite angles as shown for optimal coverage. The mounting base is magnetic and attaches to the metallic surfaces for flexible placement. The antennas may also be directly connected to the antenna connectors on the adapter.

11. Power on your computer.

TEW-807ECH

12. After the driver is successfully installed, click the icon in the system tray to scan for available wireless networks.


7


13. Click the network you would like to connect.

14. Enter the WiFi Key (password).

TEW-807ECH

15. The status will display “Connected” to indicate a successful connection.

Note: If the connected message does not display, double check your WiFi key (password) and re-enter it.


8


Connect to your wireless network using WPS

WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless router/access point supports WPS, you can use this feature to easily connect wireless devices to your network.

Note: You can typically find out if you if your wireless router/access point supports WPS just by looking at the physical device. There should be a WPS push button located on the exterior casing of the device, if not, your device may not support WPS or you may need to reference your device documentation as to how WPS can be initiated on the device. If your device does not have an identifiable WPS push button on the exterior location, we would recommend using the standard connection method on the previous page.

1. Click the WiFi icon in the system tray to scan for available wireless networks.

TEW-807ECH

3. Leave this window open.

2. Click the network you would like to connect.


9


4. On your wireless router/access point, push the WPS button.

Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation for

WPS operation.

TEW-807ECH

15. The status will display “Connected” to indicate a successful connection.

Note: If the connected message does not display, double check your WiFi key (password) and re-enter it.


Note: If the WPS process fails, you will receive not receive a message “Connected”. You may need to attempt the WPS process again. Please refer to your wireless router/access point documentation regarding the operation of WPS.

10


Technical Specifications

Standards



PCI Express 1.0a



IEEE 802.11a



IEEE 802.11b



IEEE 802.11g



IEEE 802.11n (up to 300 Mbps)



IEEE 802.11ac (up to 867 Mbps)

Hardware Interface



PCI Express x1 (Version 1.0a)



LED indicator



2 x RP-SMA antenna connectors



Magnetic Antenna Base with 1 m (3.3 ft) extension cable



2 High Gain Detachable Dual Band Antennas



Standard and low profile tower brackets

Encryption



Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS

Compatibility



Windows® 8.1, 8, 7, Vista, XP

Special Features



2 high gain dual band detachable antennas and integrated high powered amplifiers for long range connectivity



Magnetic Antenna Base for easy mounting and antenna positioning for optimal signal reception



High-speed 802.11ac connectivity


TEW-807ECH

Quality of Service



WMM



WMM-SA

Frequency



2.4GHz: (FCC) 2.412 – 2.462GHz, (ETSI) 2.412 – 2.472GHz



5GHz: (FCC) 5.745 - 5.825GHz, (ETSI) 5.150 – 5.250GHz/5.260 – 5.320GHz/5.500

– 5.700GHz

Modulation



802.11b: CCK, DQPSK, DBPSK



802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM



802.11n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM



802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM

Antenna Gain



2.4 GHz/5 GHz: 2 x 5 dBi (max.) dual band external/detachable

Wireless Output Power



802.11a: 28 dBm (max.) @ 54 Mbps



802.11b: 27 dBm (max.) @ 11 Mbps



802.11g: 27 dBm (max.) @ 54 Mbps



802.11n (2.4GHz): 27 dBm (max.) @ 300 Mbps



802.11n (5GHz): 27 dBm (max.) @ 300 Mbps



802.11ac: 27 dBm (max.) @ 867 Mbps

Receiving Sensitivity



802.11a: -90 dBm (typical) @ 54 Mbps



802.11b: -91 dBm (typical) @ 11 Mbps



802.11g: -87 dBm (typical) @ 54 Mbps



802.11n (2.4GHz): -85 dBm (typical) @ 300 Mbps



802.11n (5GHz): -90 dBm (typical) @ 300 Mbps



802.11ac: -58 dBm (typical) @ 867 Mbps

11


Wireless Channels



2.4GHz: (FCC) 1-11, (ETSI) 1-13



5GHz: (FCC) 149, 153, 157, 161, 165, (ETSI) 36, 40, 44, 48, 52, 56, 60, 64, 100,

104, 108, 112, 116, 120, 124, 128, 132, 136, 140

Power



Consumption: Max. 6 W

Operating Temperature



00 - 55



C (32 – 141



F)

Operating Humidity



Max. 90% non-condensing

Certifications



CE



FCC

Dimensions



84 x 64 x 17 mm (3.3 x 2.5 x 0.7 in.)

Weight



80 g (2.8 oz.)



Antenna Base: 114 g (4 oz.)

*Disclaimers*

* Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For maximum performance of up to 867Mbps, connect to an 867 Mbps 802.11ac wireless router or access point.


TEW-807ECH

12


Troubleshooting

Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do?

Answer:

1. For Windows® 8.1/8/7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\Autorun.exe, where “D” in

“D:\Autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the

ENTER key on your keyboard

2. For Windows® Vista, if the installation menu does not appear automatically, click

Start, click the Start Search box, and type D:\Autorun.exe where "D" in

"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the

ENTER key on your keyboard.

3. For Windows® XP, if the installation menu does not appear automatically, click

Start, click Run, and type

D:\Autorun where "D" in "D:\Autorun.exe" is the letter assigned to your CD-ROM

Drive, and then press the ENTER key on your keyboard.

Q: I completed all the steps in the quick installation guide, but my Wireless USB

Adapter is not connecting to my access point. What should I do?

Answer:

1. Verify that the SSID (Network Name) matches your wireless router or access point's SSID

2. Please check with your network administrator for security key in order to access a secured wireless access point or router. Please refer to the User's Guide for more information regarding wireless network security.

3. Check your TCP/IP properties to ensure that Obtain an IP address automatically is selected.

4. Double-click the Wireless Configuration Utility icon, click Available Networks and then click Refresh to check and see if there are any available wireless networks listed.


TEW-807ECH

Q: Windows is unable to recognize my hardware. What should I do?

Answer:

1. Make sure your computer meets the minimum requirements as specified in

Section 1 of this quick installation guide.

2. You must complete the installation of the Wireless Configuration Utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer.

3. Connect the Wireless USB Adapter to a different USB port on your computer.

Q: I cannot open the Wireless Configuration Utility. What should I do?

Answer:

Access your device manager to make sure the adapter is installed properly.

1. To access the device manager on Windows® 8.1/8/7, click on the Windows icon on the bottom left-hand corner, click Computer, click System Properties and then click Device Manager.

2. To access the device manager on Windows® Vista, right-click Computer, click

Properties and then click Device Manager.

3. To access the device manager on Windows® XP, right-click My Computer, click

Properties, click the Hardware tab, and then click Device Manager.

If you see a networking device with a yellow question mark or exclamation point:

1. Uninstall the device from device manager

2. Remove the adapter from the computer

3. Click the Windows / Start icon, click All Programs, click TRENDnet Wireless Utility and then click Uninstall.

13


Appendix

How to choose the type of security for your wireless network

Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router.

There are a few different wireless security types supported in wireless networking each having its own characteristics which may be more suitable for your wireless network taking into consideration compatibility, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware).

It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.).

In general, it is recommended that you choose the security type with the highest strength and performance supported by the wireless computers and devices in your network. Please review the security types to determine which one you should use for your network.

Wireless Encryption Types



WEP: Legacy encryption method supported by older 802.11a/b/g hardware.

This is the oldest and least secure type of wireless encryption. It is generally not recommended to use this encryption standard, however if you have old 802.11 b, 802.11g or 802.11a wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your router to WEP to allow the old adapters to connect to the router. Note: This encryption standard

will limit connection speeds to 54Mbps.


TEW-807ECH



WPA: This encryption is significantly more robust than the WEP technology.

Much of the older 802.11a or 802.11g hardware has been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps.



WPA-Auto: This setting provides the router with the ability to detect wireless devices using either WPA or WPA2 encryption. Your wireless network will automatically change the encryption setting based on the first wireless device connected. For example, if the first wireless client that connects to your wireless network uses WPA encryption your wireless network will use WPA encryption. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. NOTE: WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps



WPA2: This is the most secure wireless encryption available today, similar to

WPA encryption but more robust. This encryption standard also supports the highest connection speeds. TRENDnet recommends setting your router to this encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your router to either WPA or WPA-Auto encryption.

Note: Check the specifications of your wireless network adapters and wireless appliances

to verify the highest level of encryption supported.

14


Open or Shared \ WEP – Enter the WEP key for your wireless network. Wireless network has WEP security enabled, open or shared. Please note that the Key Index 1-4 must also match the same index configured on the wireless router/access point.

WEP Key Format

Character set

64-bit key length

128-bit key length

HEX

0-9 & A-F, a-f only

10 characters

26 characters

Alphanumeric (a,b,C,?,*, /,1,2, etc.)

5 characters

ASCII

13 haracters

WPA/WPA2-PSK/TKIP or AES – Wireless network has WPA/WPA2-PSK security enabled,

TKIP or AES. Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)

Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network.

Security Standard

Compatible

Wireless

Standards

Highest

Performance

Under This

Setting

Encryption

Strength

WEP

IEEE 802.11a/b/g

(802.11n devices will operate at

802.11g to connect using this standard)

Up to 54Mbps

WPA

IEEE 802.11a/b/g

(802.11n/ac devices will operate at 802.11g to connect using this standard)

Up to 54Mbps

WPA2

IEEE 802.11a/b/g/n/ac

Up to 867Mbps 11ac

Up to 300Mbps 11n *

**

Additional

Options

Recommended

Configuration

Low

Open System or

Shared Key,

HEX or ASCII,

Different key sizes

Open System

ASCII

13 characters

Medium

TKIP or AES,

Preshared Key or

RADIUS

TKIP

Preshared Key

8-63 characters

High

TKIP or AES,

Preshared Key or

RADIUS

AES

Preshared Key

8-63 characters

*Dependent on the maximum 802.11n data rate supported by the device (300Mbps)

**Dependent on the maximum 802.11ac data rate supported by the device (867Mbps)


TEW-807ECH

How to find your IP address?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for

configuring network settings.

Command Prompt Method

Windows® XP/Vista/7/8/8.1

1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run dialog box.

2. In the dialog box, type cmd to bring up the command prompt.

3. In the command prompt, type ipconfig /all to display your IP address settings.

Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.

How to configure your network settings to obtain an IP address automatically or use

DHCP?


configuring network settings.

Windows® 8/7

a. Go into the Control Panel, click Network and Sharing Center. b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK.

Windows® Vista

a. Go into the Control Panel, click Network and Internet. b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties. c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.

15


d. Then click Obtain an IP address automatically and click OK.

Windows® XP

a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK.

Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.

How to connect to a wireless network using the built-in Windows utility?


connecting to a wireless network using the built-in utility.

Windows® 8.1/8/7

1. Open Connect to a Network by clicking the network icon ( or ) in the notification area.

2. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect.

4. You may be prompted to enter a security key in order to connect to the network.

5. Enter in the security key corresponding to the wireless network, and click OK.

Windows® Vista

1. Open Connect to a Network by clicking the Start Button. and then click Connect

To.

2. In the Show list, click Wireless.

3. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect.


5. Enter in the security key corresponding to the wireless network, and click OK.


TEW-807ECH

Windows XP

1. Right-click the network icon in the notification area, then click View Available

Wireless Networks.

2. In Connect to a Network, under Available Networks, click the wireless network you would like to connect to.


4. Enter in the security key corresponding to the wireless network, and click Connect.

16


Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of

20 centimeters between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

RoHS

This product is RoHS compliant.


TEW-807ECH

Europe – EU Declaration of Conformity

TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.

Safety

EN60950-1 : 2006 + A11 : 2009 + A1: 2010 + A12: 2011

EMC

EN 301 489-1 V1.9.2: 09-2011

EN 301 489-17 V2.2.1: 09-2012

EN 55022 2010 + AC: 2011 (Class B)

Radio Spectrum & Health

EN 300 328

EN 62311

V1.8.1 : 06-2012

2008

This product is herewith confirmed to comply with the Directives.

Directives

Low Voltage Directive 2006/95/EC and 2014/35/EU

EMC Directive 2004/108/EC

R&TTE Directive 1999/5/EC

EMF Directive 1999/519/EC

RoHS Directive 2011/65/EU

REACH Regulation (EC) No. 1907/2006

17


Česky [Czech]

TRENDnet tímto prohlašuje, že tento TEW-807ECH je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice

2006/95/ES, 2014/35/EU, 2004/108/ES, 1999/5/ES, 2009/125/ES,

2011/65/EU, a REACH (ES) 1907/2006.

Dansk [Danish]

Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW-

807ECH overholder de væsentlige krav og øvrige relevante krav i direktiv 2006/95/EF, 2014/35/EU, 2004/108/EF, 1999/5/EF,

2009/125/EF, 2011/65/EU, og REACH (EF) 1907/2006.

Deutsch

[German]

Hiermit erklärt TRENDnet, dass sich das Gerät TEW-807ECH in

Übereinstimmung mit den grundlegenden Anforderungen und den

übrigen einschlägigen Bestimmungen der Richtlinie 2006/95/EG,

2014/35/EU, 2004/108/EG, 1999/5/EG, 2009/125/EG, 2011/65/EU, und REACH (EG) 1907/2006 befindet.

Eesti [Estonian]

Käesolevaga kinnitab TRENDnet seadme TEW-807ECH vastavust direktiivi 2006/95/EÜ, 2014/35/EU, 2004/108/EÜ, 1999/5/EÜ,

2009/125/EÜ 1999/5/EÜ, 2011/65/EU, ja REACH (EÜ) 1907/2006 põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English

Español

[Spanish]

Hereby, TRENDnet, declares that this TEW-807ECH is in compliance with the essential requirements and other relevant provisions of

Directive 2006/95/EC, 2014/35/EU, 2004/108/EC, 1999/5/EC,

2009/125/EC, 2011/65/EU, and REACH (EC) 1907/2006.

Por medio de la presente TRENDnet declara que el TEW-807ECH cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2006/95/CE,

2014/35/EU, 2004/108/CE, 1999/5/CE, 2009/125/CE, , 2011/65/EU, y

REACH (CE) 1907/2006.

Ελληνική

[Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙTEW-

807ECHΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ

ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2006/95/EK, 2014/35/EU,

2004/108/EK, 1999/5/EK, 2009/125/EK, 2011/65/EU, REACH (EK)

1907/2006 και.

Français

[French]

Par la présente TRENDnet déclare que l'appareil TEW-807ECH est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2006/95/CE, 2014/35/EU, 2004/108/CE,

1999/5/CE, 2009/125/CE, 2011/65/EU, REACH (CE) 1907/2006 et.

Italiano[Italian]

Con la presente TRENDnet dichiara che questo TEW-807ECH è


TEW-807ECH

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2006/95/CE, 2014/35/EU, 2004/108/CE,

1999/5/CE, 2009/125/CE, 2011/65/EU, e REACH (CE) 1907/2006..

Latviski [Latvian]

AršoTRENDnetdeklarē, ka TEW-807ECH atbilst Direktīvas

2006/95/EK, 2014/35/EU, 2004/108/EK, 1999/5/EK, 2009/125/EK,

2011/65/EU, un REACH (EK) 1907/2006 būtiskajāmprasībām un citiemar to saistītajiemnoteikumiem.

Lietuvių

[Lithuanian]

Šiuo TRENDnet deklaruoja, kad šis TEW-807ECH atitinka esminius reikalavimus ir kitas 2006/95/EB, 2014/35/EU, 2004/108/EB,

1999/5/EB, 2009/125/EB, 2011/65/EU, ir REACH (EB) 1907/2006

Direktyvos nuostatas.

Nederlands

[Dutch]

Hierbij verklaart TRENDnet dat het toestel TEW-807ECH in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2006/95/EG, 2014/35/EU, 2004/108/EG,

1999/5/EG, 2009/125/EG, 2011/65/EU, en REACH (EG) 1907/2006.

Malti [Maltese]

Hawnhekk, TRENDnet, jiddikjara li dan TEW-807ECH jikkonforma malħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-

Dirrettiva 2006/95/KE, 2014/35/EU, 2004/108/KE, 1999/5/KE,

2009/125/KE, 2011/65/EU, u REACH (KE) 1907/2006.

Magyar

[Hungarian]

Alulírott, TRENDnet nyilatkozom, hogy a TEW-807ECHmegfelel a vonatkozó alapvetõ követelményeknek és az 2006/95/EK,

2014/35/EU, 2004/108/EK, 1999/5/EK, 2009/125/EK, 2011/65/EU, irányelv, a REACH (EK) 1907/2006 irányelv egyéb elõírásainak.

Polski [Polish]

Português

[Portuguese]

Slovensko

[Slovenian]

Niniejszym TRENDnet oświadcza, że TEW-807ECH jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2006/95/WE, 2014/35/EU,

2004/108/WE, 1999/5/WE, 2009/125/WE, 2011/65/EU, i REACH

(WE) 1907/2006.

TRENDnet declara que este TEW-807ECH está conforme com os requisitos essenciais e outras disposições da Directiva 2006/95/CE,

2014/35/EU, 2004/108/CE, 1999/5/CE, 2009/125/CE, 2011/65/EU, e

REACH (CE) 1907/2006.

TRENDnet izjavlja, da je ta TEW-807ECH v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2006/95/ES,

2014/35/EU, 2004/108/ES, 1999/5/ES, 2009/125/ES, 2011/65/EU, in

REACH (ES) 1907/2006.

18


Slovensky

[Slovak]

TRENDnettýmtovyhlasuje, že TEW-807ECHspĺňazákladnépožiadavky a všetkypríslušnéustanoveniaSmernice 2006/95/ES, 2004/108/ES,

2014/35/EU, 1999/5/ES, 2006/95/ES, 2004/108/ES, 1999/5/ES,

2009/125/ES, 2009/125/ES, 2011/65/EU, a REACH (ES) 1907/2006.

Suomi [Finnish]

TRENDnet vakuuttaa täten että TEW-807ECH tyyppinen laite on direktiivin 2006/95/EY, 2014/35/EU, 2004/108/EY, 1999/5/EY,

2009/125/EY,1999/5/EY, 2011/65/EU, ja REACH (EY) 1907/2006 oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska

[Swedish]

Härmed intygar TRENDnet att denna TEW-807ECH står I

överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bEYtämmelser som framgår av direktiv 2006/95/EG,

2014/35/EU, 2004/108/EG, 1999/5/EG, 2009/125/EG, 2011/65/EU, och REACH (EG) 1907/2006.

TEW-807ECH


19


Industry Canada Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance

20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Caution:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-

5725 MHz shall comply with the E.I.R.P. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the E.I.R.P. limits specified for point-to-point and non point-to-point operation as appropriate.

(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350

MHz et 5 470-5 725 MHz doit se conformer à la limite de P.I.R.E.;


TEW-807ECH

(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825

MHz) doit se conformer à la limite de P.I.R.E. spécifiée pour l’exploitation point à point et non point à point, selon le cas.

(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes

5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

This device has been designed to operate with a dipole antenna have a maximum gain of 5 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada.

The required antenna impedance is 50 ohms.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (E.I.R.P.) is not more than that necessary for successful communication.

This radio transmitter (IC: 6337-TEW807ECH) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de dipole antenne avec 5 dBi. Une antenne à gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité

Le présent émetteur radio (IC: 6337-TEW807ECH) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

20


Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.

TEW-807ECH – 3 Years Warranty

AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.

If a product does not operate as warranted during the applicable warranty period,

TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies.

TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to

TRENDnet pursuant to any warranty.

There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.

Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.

WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S

OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE

EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING


Limited Warranty

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR

IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE

OR USE OF TRENDNET’S PRODUCTS.

TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND

EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST

OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,

IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR

MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY

ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO

EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN

CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR

PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL

LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY

OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND

OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY

FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL

OF ITS ESSENTIAL PURPOSE.

Governing Law: This Limited Warranty shall be governed by the laws of the state of

California.

Some TRENDnet products include software code written by third party developers.

These codes are subject to the GNU General Public License ("GPL") or GNU Lesser

General Public License ("LGPL").

Go to http://www.trendnet.com/gpl or http://www.trendnet.com

Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code.

These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt

or http://www.gnu.org/licenses/lgpl.txt

for specific terms of each license.

PWP05202009v2 2015/6/19

21

Trendnet RB-TEW-807ECH AC1200 High Power Wireless Dual Band PCIe Adapter User's Guide

Contents

Product Overview

TEW-807ECH

Package Contents

Features

Easy Setup

AC1200 Dual Band

Wireless Coverage

PCIe Slot

Heat Sink

Tower Brackets

Extension Cable

Magnetic Base

LED Indicator

Operating Systems

Product Hardware Features

System Requirements

Application Diagram

Installing your Wireless Adapter

Connect to your wireless network using WPS

Technical Specifications

Troubleshooting

Appendix

Related manuals

Table of contents

Trendnet RB-TEW-807ECH AC1200 High Power Wireless Dual Band PCIe Adapter User's Guide

Contents

Product Overview

TEW-807ECH

Package Contents

Features

Easy Setup

AC1200 Dual Band

Wireless Coverage

PCIe Slot

Heat Sink

Tower Brackets

Extension Cable

Magnetic Base

LED Indicator

Operating Systems

Product Hardware Features

System Requirements

Application Diagram

Installing your Wireless Adapter

Connect to your wireless network using WPS

Technical Specifications

Troubleshooting

Appendix

Related manuals

Trendnet

XU8TEW807ECH

Approx

APPUSB600DA

Trendnet

RB-TEW-807ECH

Universal Scientific Industrial

IXMUSGAT02

Linksys

Q87-WRT54G2V15

Trendnet

XU8TEW624UB

Trendnet

TEW-624UB

Trendnet

XU8TEW664UBV2

Trendnet

TEG-PCITXRL

Trendnet

XU8TEW805UB

Trendnet

TU-S9

Table of contents