Groove A-2Hn

The Groove is our smallest outdoor series model - a fully featured

RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built-in

630mW 802.11b/g/n wireless radio. With the Nv2 TDMA technology, 125Mbit aggregate throughput is possible, limited only by the ethernet port!

The Groove A-2Hn has a RouterOS Level4 license, so you can use it as a wireless access point (or as a client and for point to point links).

It has a built-in N-male connector, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

The Groove runs RouterOS with all it’s features.

CPU

Memory

Boot loader

Data storage

Atheros AR7241 400MHz network processor

64MB DDR SDRAM onboard memory

RouterBOOT

Onboard NAND memory chip

Ethernet

Wireless

Extras

LEDs

One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU frame size up to 2030

Wireless Built-in 2GHz 802.11b/g/n 1x1 MIMO, N-male connector

Reset switch, Beeper, Voltage monitor, Temperature monitor

5 wireless signal LEDs, ethernet activity LED (configurable)

Power options

Consumption

Passive 9-30V PoE only. 16KV ESD protection on RF port

Up to 0,19A at 24V (4.56W)

Dimensions 177x44x44mm, 193g. Must be mounted with ethernet pointing down

Operating temperature -30C to +70C

Operating system

Package contains

MikroTik RouterOS v5, Level4 license (AP, station or point-to-point)

Groove A-2Hn unit, mounting loops, PoE injector, 24V power adapter

RX sensitivity

TX power

Modulations

802.11b/g: –92 dBm @ 6Mbps to -75 dBm @ 54 Mbps

802.11n: –92 dBm @ MCS0 to -71 dBm @ MCS7 40MHz

802.11b/g: 28dBm @ 1-11/6Mbps to 24dBm @ 54 Mbps

802.11n: 27dBm @ MCS0 to 20dBm @ MCS7

OFDM: BPSK, QPSK, 16 QAM, 64QAM

DSSS: DBPSK, DQPSK, CCK