advertisement
![CROWN AUDIO XLS 1002 Power Amplifier Data Sheet | Manualzz CROWN AUDIO XLS 1002 Power Amplifier Data Sheet | Manualzz](http://s1.manualzz.com/store/data/012327465_1-e3782ce523480d2b5ed996b8510f9cf7-360x466.png)
XLS DriveCore
™
2 Series
Features
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Meet the new XLS DriveCore 2 Series.
The next generation of XLS got a makeover with a sleek new look, larger LCD display, and more DSP with extended functionality. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at
4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The
XLS DriveCore 2 assures that you will be heard as you deliver powerful, pure sound experiences for any venue.
• Class D amp with Crown's ultraefficient DriveCore technology weighs less than 11 lbs (5 kg)
• Higher DSP capabilities: More control; has band pass filter per channel
• Increased lighting functionality; turn off display or any/all LED indicators except clip and thermal to reduce distraction in dark venues
• Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
• Set display sleep mode after specified time without having to press a button
• Security setting disables menu buttons; menu locked/unlocked by entering button combination
• System reset allows factory settings to be restored
• Remote power trigger
• Peakx™ Limiters provide maximum output while protecting your speakers
• XLR, 1/4", RCA inputs provide flexibility
• Integrated PureBand™
Crossover System for better performance and control
• Efficient forced-air fans prevent excessive thermal buildup
XLS DriveCore
™
2 Series
s
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
XLS 2502
Power Matrix
Model Channels
1002
1502
2002
2
2
2
2502 2
*Maximum average power in watts at 0.5% THD, 1kHz
2Ω Dual
550W
775W
1050W
1200W
4Ω Dual
350W
525W
650W
775W
8Ω Dual
215W
300W
375W
440W
4Ω Bridged 8Ω Bridged
1100W
1550W
2100W
2400W
700W
1050W
1300W
1550W
Performance Specifications
Sensitivity
Frequency Response
(at 1W, 20Hz to 20kHz)
Signal to Noise Ratio
(rated as dBr to full rated 8Ω power output; A-Weighted
Total Harmonic Distortion
(THD)
Intermodulation Distortion
(60Hz and 7kHz at 4:1) from full rated output to -30dB
Damping Factor
(8Ω, 10Hz ~ 400Hz)
Crosstalk
(below rated 8Ω power)
Physical Specifications
Width
Height
Depth
Net Weight
Shipping Weight
*At .775Vrms sensitivity, Signal to Noise is 6dB lower.
XLS 1002
.775Vrms or
1.4Vrms
+0dB, -1dB
>97dB*
<0.5%
<0.3%
>200 >200 >200 >200
At 1kHz: > 85dB
At 20kHz: > 55dB
At 1kHz: > 85dB
At 20kHz: > 55dB
At 1kHz: > 85dB
At 20kHz: > 55dB
At 1kHz: > 85dB
At 20kHz: > 55dB
19 in. (48.3 cm)
3.5 in. (8.9 cm)
7.7 in. (19.6 cm)
8.6 lbs (3.9 kg)
13.6 lbs (6.2 kg)
XLS 1502
.775Vrms or
1.4Vrms
+0dB, -1dB
>103dB*
<0.5%
<0.3%
XLS 2002
.775Vrms or
1.4Vrms
+0dB, -1dB
>103dB*
<0.5%
<0.3%
XLS 2502
.775Vrms or
1.4Vrms
+0dB, -1dB
>103dB*
<0.5%
<0.3%
19 in. (48.3 cm)
3.5 in. (8.9 cm)
7.7 in. (19.6 cm)
8.6 lbs (3.9 kg)
13.6 lbs (6.2 kg)
19 in. (48.3 cm)
3.5 in. (8.9 cm)
10.7 in. (27.2 cm)
10.8 lbs (4.9 kg)
15.8 lbs (7.2 kg)
19 in. (48.3 cm)
3.5 in. (8.9 cm)
10.7 in. (27.2 cm)
10.8 lbs (4.9 kg)
15.8 lbs (7.2 kg)
Specifications subject to change without prior notice. Latest information available at www.crownaudio.com.
Crown offers a three-year, no-fault, fully transferable warranty for every new Crown amplifier – an unsurpassed industry standard. With this unprecedented no-fault protection, your new Crown amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. In most cases, the only things not covered by this warranty are those losses normally covered by insurance and those caused by intentional abuse. Plus, the coverage is transferable, should you sell your amplifier. See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributors for warranty information or call 574-294-8200. © 2015 Crown Audio ® , Inc.
advertisement
Related manuals
advertisement