Dynex DX-D7PDVD 7" Portable DVD Player Quick Setup Guide

Quick Setup Guide I DX-D7PDVD/D9PDVD 7" and 9" Dual Screen Portable DVD Player

Features

DVD player (both 7" and 9") 7" monitor Congratulations on your purchase of this high-quality Dynex product. Your DX-D7PDVD or

DX-D9PDVD represents the state of the art in personal DVD player design and is designed for reliable and trouble-free performance.

Package contents

• 7" or 9" main DVD player

• 7" or 9" LCD monitor

• AV cable (for TV)

• AC adapter

• Vehicle charger

• AV/DC cable

(for connection between the 2 screens)

• Headphones (2)

• Headrest mount (2)

• Carry bag

• Quick Setup Guide

Before using your new product, please read these instructions to prevent any damage.

Player navigation controls

SETUP FUNC.

# COMPONENT

1 OPEN switch

2 ON/OFF switch

3 SETUP button

4 FUNC. button

6 button

7 button

CONTROL

/

/

/

/

OK

DESCRIPTION

In Menu mode, press to move up in a list or menu.

In playback mode, press to go to the previous title, chapter, or track.

In Menu mode, press to move down in a list or menu.

In playback mode, press to go to the next title, chapter, or track.

In Menu mode, press to move left.

In playback mode, press to fast reverse the playback.

In Menu mode, press to move right.

In playback mode, press to fast forward the playback.

In menu mode, press to confirm a selection.

9 DC IN jack

10 DC OUT jack

11 AV OUT jack

14 Stand

DESCRIPTION

Slide to open the disc tray.

Slide to turn your DVD player on or off.

Press to open or close the setup menu.

Press to enter or exit the virtual remote control.

See “Player navigation controls”.

Press to pause or resume the playback.

Press to stop disc playback.

Lights when your player is turned on.

Connect to an AC adapter or vehicle charger.

Connect the LCD monitor to this jack using the

AV/DC cable.

Connect the LCD monitor to this jack using the

AV/DC cable. Or connect a remote monitor, TV, or amplifier to this jack using the AV cable and an RCA cable (not supplied).

Plug headphones into this jack.

Note: When headphones are plugged in, the internal speakers are muted.

Rotate this dial to adjust the volume.

Pull out to set your player on a desk or table.

Slide mounting straps through the slot when installing player in a vehicle.

9" monitor

# COMPONENT DESCRIPTION

Slide to turn your DVD player on or off.

Rotate this dial to adjust the volume.

4

5

AV IN jack

DC IN jack

6 BRIGHTNESS +/-

7 Stand

8 Strap slots

Plug headphones into this jack.

Note: When headphones are plugged in, the internal speakers are muted.

Connect the AV OUT jack on your DVD player to this jack using the AV/DC cable.

Connect the DC OUT jack on your DVD player to this jack using the AV/DC cable.

Rotate this dial to adjust the brightness of the display.

Pull out to set your player on a desk or table.

Slide mounting straps through the slot when installing player in a vehicle.

Setting up your player

To install your player in a vehicle

1 Loosen the straps of the mounting plate as shown below, fit the DVD player or monitor to the mount in “front” position.

2 Slide the horizontal straps A and B through the slots on the back of the

DVD player or monitor, then fold and secure them on to the back of the mounting plate until the Velcro attaches.

3 Bring straps C1, C2, D1, and D2 in front of the DVD player or monitor and attach to the Velcro as shown.

4 Fit the straps E1, E2, F1, and F2 around the headrest and secure the two buckles. Pull the straps tight as shown.

UP

A back

B

To connect to a 12V car power outlet

1 Plug one end of the vehicle charger into the DC IN jack on the side of your player.

2 Plug the other end of the adapter into a 12V vehicle power outlet or vehicle cigarette lighter socket.

3 Using the AV/DC cable, connect AV OUT and DC OUT on the DVD player to AV IN and DC IN on the extra monitor.

4 Turn on your player.

Extra monitor DVD player

Power outlet or cigarette lighter socket

SETUP FUNC.

PULL front

PULL

To connect to AC power

• Plug one end of the AC adapter into the DC IN jack on the side of your player, and the other end into an AC outlet.

Connecting to a TV or monitor

You can connect your DVD player to a TV or monitor so you can watch

DVDs on the TV or monitor.

1 Plug the end of the supplied AV cable that has one black connector into the AV OUT jack on your DVD player.

2 Plug the connectors on an RCA cable (not included) into the connectors on the other end of the supplied AV cable. Make sure that the colors on the connectors match.

3 Plug the other end of the RCA cable into the AV jacks on the TV or monitor. The white connector goes into the left audio jack. The red connector goes into the right audio jack. The yellow connector goes into the video jack.

TV or

Monitor

White = left audio

Red = right audio

Yellow = video

Using your DVD player

Playing a DVD or audio CD

Note: Most DVDs and your DVD player have region codes that help control illegal distribution of DVDs. The region code for your player is 1.

You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging.

1 Make sure that your player is connected to power.

2 Slide the ON/OFF switch to the ON position.

3 Slide the OPEN switch. The disc tray opens.

4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing automatically.

Legal notices

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

CAN ICES-3 (B)/NMB-3 (B)

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

“Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.”

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.

“Cet équipement est conforme à l'exposition aux rayonnements IC limites établies pour un environnement non contrôlé.”

Important safety instructions

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with a dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Unplug this apparatus during lightning storms or when unused for long periods of time.

13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped

14 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it.

15 The wall plug is the disconnecting device. The plug must remain readily operable.

90-day limited warranty

Visit www.dynexproducts.com for details.

Contact Dynex:

For customer service, call 800-305-2204 www.dynexproducts.com

DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some countries.

Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2013 BBY Solutions, Inc. All Rights Reserved.

V2 ENGLISH 12-1342