DaTaman-848

Turbo gang programmer

Flexible reliable programming by Dataman

• 8 independent fully isolated 48 pin

ZIF sockets

• FLASH,EPROM,EEPROM and 87C5x,89C5x,PIC16Cxx

• Supports both 5V and 3V chips

• High throughput, programs 8 pieces 8Mb flash chips within 45 seconds

• Semi-concurrent programming with auto-sensing/automatic self-start

• Device insertion and continuity test

• Independent modules allow flexible configuration and minimum down-time

• Universal adapters support 48 pin

TSOP/44PSOP/40TSOP flash chips

• Project file save/load function

• Parallel port interface with auto switching power supply

• Variable verify voltage with one/two pass

• Runs under a Windows environment-

95/98/NT & 2000

• Software updates available free from the Internet

• Optional handler interface

AVAILABLE FROM:

I N T R O D U C T I O N

The DATAMAN 848 is a PC based parallel port universal gang programmer. It offers 8 fully isolated 48 pin

ZIF sockets, extremely high throughput, standard 5 and 3 Volt chip support, device insertion and continuity check. With PC based design the programmer updates through software giving customers flexible and quick access to new chip support. The DATAMAN 848 supports EPROM, EEPROM, and FLASH.

It is also Intel 87C5x, Amtel 89C5x, and PIC16Cxx microprocessor compatible.

The DATAMAN 848 has flexible design in mind, if a customer has specialised chips that are not in our standard support list, we can provide a special program that allows the DATAMAN 848 to become a specialised chips production gang programmer.

T Y P I C A L S P E E D S

Blank

Programming

Verify

2M

3.9 sec

11.6 sec

8.5 sec

4M

7.1 sec

22.6 sec

16.5 sec

8M

13.8 sec

42.7 sec

32.4 sec

16M

27.2 sec

85.0 sec

64.4 sec

S P E C I F I C A T I O N S

S O C K E T A N D P I N D R I V E R

8 fully isolated 48-pin ZIF sockets with receptacle, over 1M Ohm resistances between each socket.

Four DAC’s for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution.

Vcc range 2V to 7.5V, resolution 50mV.

Over current protect on all voltage sources.

Logic level 5V to 2.7V programmable by software.

D E V I C E O P E R A T I O N

Read, blank check, insertion/contact check, verify, checksum, erase chip, program, memory protect, edit buffer, configuration, load file, save file, project file load/save.

F I L E F O R M A T

Binary, Intel HEX, Intel extend HEX, Motorola S, HP64000ABS, TEK HEX, Straight HEX.

P C S Y S T E M R E Q U I r E M E N T

OS: Windows 95/98, NT and 2000.

CPU: Pentium and above, 16M RAM minimum, 32M recommended.

Hard disk: 8M Byte free space.

Interface: D-25 connector with standard parallel port or ECP/EPP.

G E N E R A L

Power: 100V to 240Vac, 47-63Hz-auto switch.

Power consumption: 65W.

Operating temperatures: 5 to 45 degrees Celsius.

Safety: CE&LVD certified.

Weight: 8.5Kg net, shipment 10Kg.