QuickStartGuide

ARIR200 www.arinfi niteradio.com

Congratulations on purchasing your new Acoustic Research Wi-Fi Internet Radio.

Please follow these instructions to set up and start using the radio.

1

Unpack the unit

You should fi nd the following items in the box:

To Exit DEMO mode, press and release preset 1, then SLEEP/SNOOZE, then preset 6.

3

Optional: Insert AAA batteries in the base of the radio

Follow the polarity markers in the battery compartment.

The batteries (not included) power the clock and alarm whenever the radio loses electricity.

Radio

User Manual

Power adapter

Quick Start

Guide (this leafl et)

Setup

Information

Card

Ethernet cable AM loop antenna

Additional requirements

• Broadband Internet service

• Broadband (cable/DSL) modem, usually supplied by your Internet service provider

• An 802.11 b or g (Wi-Fi) wireless home network or Ethernet router/switch/hub with available LAN port

For Wi-Fi connections, you may also need:

• Your wireless network’s SSID

• Your access password (for secure networks)

2

Setup your AR Infi nite Radio accounts

To simplify setup on the radio please complete these steps:

!

A. Find the Setup Information Card that contains your radio’s MAC address number (MAC: 00-21-2A-

XX-XX-XX) and activation PIN # (PIN: XXXX). (This number is also found in the Device Info screen under the Settings menu in your radio.)

B. Using any Internet-connected computer, go to www.arinfi niteradio.com/setup and follow the online instructions.

• You will need to input your radio’s MAC address and PIN # to associate your radio with your personal settings.

v2.0 (EN)

4

Optional: For use with a “Wired” connection

Use the supplied Ethernet cable if you do not have a wireless (Wi-Fi) access point.

LAN

LAN

Broadband modem or

Ethernet router/hub/switch

LAN

5

Plug in and turn on the radio

Electrical outlet

Exit the DEMO mode after turning on

Press and release preset 1, then

SLEEP/SNOOZE, then preset 6.

6

Set up the radio

A. NOTE: When you turn on the radio for the fi rst time, it will be in “DEMO” mode. To exit this mode, press and release preset 1, then SLEEP/SNOOZE, then preset 6 on top of the radio.

B. After exiting the DEMO mode, the radio displays the Select Language screen.

Choose your preferred language.

C. The Network Setup screen displays connection options:

• Select Wired to connect using an

Ethernet cable and proceed to step D.

OR

• Select Wireless, then choose from setup options displayed:

– Detect Networks allows you to search for available networks, then choose your network.

– Enter SSID allows you to manually enter a known network name (SSID). See tips to the right.

– If the network is secure, select security type and/or enter your password in the Network Security screen.

Press to show “DONE” and SELECT to confi rm.

Press or to highlight,

SELECT to confi rm.

D. The radio should now connect to the Internet. If the radio does not connect refer to the troubleshooting section in your user manual.

After connecting to the Internet

• If you did not activate your Infi nite Radio accounts, or if the radio cannot get your details from the Infi nite Radio server, the radio may ask for your ZIP code. Input your code.

• If your radio has successfully connected to the Internet you will hear a welcome message streaming from the Internet.

Use the navigation controls to make choices and input information:

− move highlight up

– move highlight down

– move selection/navigate left

– move selection/navigate right

SELECT - confi rm selected option or character

When inputting characters, press or to choose among uppercase, lowercase, numeric, or special characters.

To insert spaces or correct mistakes, press to display the

Commands list and then press

or to choose the desired command.

About passphrase:

• This radio supports secured access points using the

Wireless Equivalent Privacy

(WEP) keys or Wi-Fi Protected

Access (WPA and WPA2) standards.

• WEP keys are either 10 or

26 characters long (e.g.

6E78214A52). Note that some Wi-Fi routers support passphrase generation for

WEP security. However, there is no industry standard for

WEP passphrase generation and this radio does not

support WEP passphrases.

• If you are using a WEP secured access point, enter the WEP key (HEX format) instead of the passphrase.

Learn more about your Internet Radio

Read the user manual for more information on the player’s features, safety and warranty information, and answers to Frequently Asked Questions (FAQ’s).

Need more help?

Do not return this product to the store.

Visit www.arinfi niteradio.com to get the latest fi rmware updates and FAQ’s.

Controls

Station presets

On/standby

Audio source

Weather information

Heart

Ban

Tag

Menu up

Previous/scan back/reverse/ menu back

Menu down

Rear panel connections

WEATHER

Sleep timer/ snooze

Volume

Alarm set/ alarm off

Clock set

Home/Main menu

Record

Play/pause

Display

Next/scan/fast forward/menu forward

Menu select

AM loop antenna socket

FM antenna

LAN port

Headphone/ audio line-out

RealAudio is a trademark or a registered trademark of RealNetworks, Inc.

Power adapter input socket

USB 2.0 port

You can connect USB devices to the USB port:

The radio can play open MP3, WMA, and RealAudio audio fi les stored on the connected USB device.

Using the radio

General procedures

Turn on/off (standby) the radio

Choose an audio source

Choose a preset radio station

Assign the current radio station to a preset

Display the menu while listening

Record the current AM/FM/Internet radio station

Start the sleep timer

Add time or cancel the sleep timer

Display the time

Set the time

Set the alarm

Press ON/STANDBY.

Press SOURCE to cycle through the audio sources (Slacker

Radio, Internet Radio, MP3tunes, USB Input, Internal Memory, or FM/AM Tuner).

Press SOURCE to choose the radio source (Slacker Radio,

Internet Radio, FM, or AM), then press a preset button (1–6).

Press and hold a preset button (1–6) until the radio beeps.

Press .

Press .

Press again to stop recording.

Press SLEEP/SNOOZE.

Press SLEEP/SNOOZE repeatedly.

Press CLOCK.

Press and hold CLOCK until the hour is highlighted.

Press or to choose hours, minutes or AM/PM.

Press or to change the time.

Press SELECT to set the time.

Press ALARM once. Then press or to choose Turn On, Turn

Off , Set Alarm Time, or Select Sound and then press SELECT.

Listening to Slacker™ radio

Choose a Slacker™ station

Start playing the selected station

Pause playback

Skip to the next song

Mark the current song as a favorite

Create a custom station based on the current artist

Ban the current song from the station

Ban the current artist from the station

Use the current station as the alarm sound

Press SOURCE to choose Slacker Radio.

Press or to move up and down the menu options and press SELECT to choose the desired genre and station.

Press SELECT.

Press . Press again to resume.

Press .

Press .

Press and hold or press and choose Create Station and then press SELECT.

Press .

Press and hold .

Press to display the options menu. Press to choose Send

to Alarm and then press SELECT.

Listening to FM/AM radio

Tune in an FM/AM radio station

Step through the radio frequencies

Use the current station as the alarm sound

Press SOURCE to choose FM or AM radio.

Press and hold or to seek. Once released, the radio will auto-tune to the next available station.

Press or .

Press to display the options menu. Press to choose Send

to Alarm and then press SELECT.

Listening to Internet radio

Choose an Internet radio station

Start playing the selected station

Mark the current station as a favorite

Press SOURCE to choose Internet Radio.

Press or to move up and down the menu options and press SELECT to navigate to the desired station.

Press SELECT.

Press or press to display the options menu. Press to choose Add to Favorites and then press SELECT.

Press . Remove the current station from My

Favorites

Use the current station as the alarm sound

Press to display the options menu. Press to choose Send

to Alarm and then press SELECT.

Listening to MP3tunes

Set up MP3tunes Locker Refer to the MP3tunes section of the user manual.

Play an audio fi le from MP3tunes Locker Press SOURCE to choose MP3tunes. Press or to exit or enter categories. Press or to highlight a fi le and press

SELECT or to start playback.

Pause playback

Skip to the next audio fi le

Press . Press again to resume.

Press .

Skip to the previous audio fi le Press within the fi rst 3 seconds of the current fi le.

Playing recordings and audio fi les

Play a recording Press SOURCE to choose Internal Memory.

Press or to highlight a recording and press SELECT.

Play an audio fi le from a connected USB device

Press SOURCE to choose USB.

Press or to exit or enter folders. Press or to highlight a fi le and press SELECT to start playback.

Pause playback

Skip to the next recording/audio fi le

Press . Press again to resume.

Press .

Skip to the previous recording/audio fi le Press within the fi rst 3 seconds of the current recording/fi le.

Listening to Weather Forecasts

Listen to today’s local forecast

Listen to 3-day local forecast

Press WEATHER once.

Press WEATHER twice.

For information on new and upcoming products and to register your new radio, visit

www.arinfi niteradio.com.

Audiovox Electronics Corp.

150 Marcus Blvd., Hauppauge, NY 11788

© 2009 Audiovox Electronics Corp.

Trademark Registered

Printed in China www.audiovox.com