ViewSonic

®

VFM1027-11M

Digital Photo Frame

- User Guide

- Guide de l’utilisateur

- Guía del usuario

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in

English, or in specific languages using the Regional selection box in the upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”

Model No. : VS13788

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the

European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance

Proposed Maximum

Concentration

Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg)

Cadmium (Cd)

Hexavalent Chromium (Cr6+)

Polybrominated biphenyls (PBB)

Polybrominated diphenyl ethers (PBDE)

0.1%

0.01%

0.1%

0.1%

0.1%

< 0.1%

< 0.01%

< 0.1%

< 0.1%

< 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

Copyright Information

Copyright © ViewSonic ® Corporation, 2010. All rights reserved.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.

Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

For Your Records

VFD1027W-11M

ViewSonic Digital Photo Frame

VS13788

VFD1027W-11M_ENG Rev. 1B 11-10-10

__________________________________

__________________________________

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

Important Safety Instructions

Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury.

Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

Warning: To prevent the risk, do not remove the cover, there are no spare parts inside, refer all product services to professional personnel.

• Digital Photo frame is for indoor use only.

• Unplug Digital Photo frame before performing care and maintenance.

• Do not block the ventilation holes on the back of Digital Photo Frame at any time.

• Keep your Multimedia Digital Photo Frame out of direct sunlight and heat source.

• Protect the power cord. Route power cords appropriately to avoid trip over by someone else or pinched by items placed on or against them. Pay particular attention to the point where the cord attaches to Digital Photo Frame.

• Only use the AC adapter included with the Digital Photo Frame. Using any other power adapter will void your warranty.

• Unplug the power cord from the outlet when the unit is not in use.

Cleaning LCD Screen

Treat the screen gently. The screen is made of glass which can be scratched or damaged

To clean fingerprints or dust from the LCD screen, we recommend using a soft / nonabrasive cloth such as a camera lens cloth to clean the LCD screen.

If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen.

Clean the LCD screen with cleaning cloth moistened with the liquid.

Package Content

• Digital Photo Frame

• AC power adapter (12V, 1.5A)

• This User Guide

• Quick Start Guide

• USB cable

• Remote Control

• Stand

Table of Contents

Introduction.........................................................................................2

Main Features.....................................................................................2

Unit Assembly.....................................................................................2

Controls..............................................................................................2

Operations..........................................................................................3

Viewing Photos in Slideshow Effect....................................................3

Main Menu..........................................................................................4

Viewing Individual Pictures.................................................................4

Copy files in the file list screen............................................................5

Feature Setup......................................................................................6

Calendar And Clock Display................................................................6

Introduction

Congratulations on your purchase of your digital photo frame.

Before operating the unit, please read this manual carefully, and retain it for future reference.

This manual will help you use the many exciting and useful features that will make your photo frame viewing more enjoyable. It includes a step by step guide to the basics on photo frame operation including instructions on uploading and playing photos.

You will also be able to create a slideshow using multiple transition effects or display one picture at a time.

Main Features

• Display digital picture in Hi-resolution and great quality

• Create an automatic slide show with multiple transition effects.

• Supports jpeg images up to 12 Mega Pixels.

• Accepts many memory cards including SD,MMC,MS cards, as well as USB flash drives.

• Calendar mode with slideshow.

• User friendly on screen display lets you easily access all features.

• Includes a credit card sized remote control.

Unit Assembly

Open the package and remove the foam packing. Install the digital photo frame stand at the rear of the unit. Insert the DC jack and plug the adapter into any AC outlet.

Insert the media into the correct slot and turn power to ON position.

Controls

POWER

MENU

SETUP

EXIT

COPY/DEL

ZOOM

ENTER







To turn ON/OFF the set.

To jump to main menu.

To enter setup menu.

To escape to previous menu.

To copy or delete the selected files.

To zoom in the photo.

To rotate the photo.

To confirm the selection or show the tool bar when play photo.

Up key. To move the icon up.

Down key. To move the icon down.

Left key. To move the icon to left.

 Right key. To move the icon to right.

VIEW To view the photo in thumbnail mode.

SLIDESHOW To run slideshow mode.

Operation

Photos can be viewed directly from your memory card or you can copy files to the device that you want to store.

For instructions on copy files, please see the “Copy file in the file list screen” section on page 5.

Viewing Photo in Slideshow Mode

The digital picture frames is compatible with the following memory cards:

Secure Digital card (SD)

Multi Media Card (MMC)

Memory Stick (MS)

Insert the memory card with the front label facing away from you. Do not force the memory card into the memory slot, if you are unable to insert the memory card easily, you may have inserted it the wrong way. Reverse it and try again.

Note:

The digital picture frame will only recognize digital picture stored in jpeg format. Digital picture stored in other formats will be ignored by the device.

Make sure you have at least one picture stored on the memory card. The frame will not function properly without a stored picture.

You can also use a USB flash drive. It operated the same way as the memory cards. Simply insert the flash drive into the USB host plug on the side of the frame.

The slideshow of your photos will begin to play automatically. The slideshow will play your photos in the order which they are listed on your memory card. You can rearrange them using a PC.

To select and view an individual picture, please see “ Viewing Individual Pictures” on page 4.

Main menu

When the digital Picture Frame is turned on, you will see the MENU screen.

There are one memory card slot and one USB port are on the board. If there is a device is inserted in these slot, the corresponding icon will be shown, otherwise it will be hidden.

Viewing Individual Pictures

Select the desired media on the main menu. If a media card is used, it will appear as an additional icon. Select the “ Photo” option from the menu and press “ENTER”.

A photo thumbnail list will appear. Use the UP/DOWN, LEFT/RIGHT arrows to highlight the desired photo.

When the desired photo is highlighted, press ENTER to view it in full screen. The photo will show up in full screen and remain still in pause mode. Press ENTER to begin slideshow mode.

While a slideshow is playing or a picture is on display, press the

ENTER button. The following display menu will appear.

The option icons displayed are as follows:

Previous

Play the previous picture in the picture list.

Play or Pause

Play or pause the current slideshow.

Next

Play the next picture in the picture list.

Rotate

Use the rotate function to change the picture orientation to either portrait or landscape.

Stop

Stop slideshow and return to the photo thumbnail list.

Zoom

Increase the picture size by 2,4,8 or 16 times.

Copy files in the file list screen

If the user wants to do copy, press the MENU button to select FILE icon. When the sub-menu is on, use the UP/DOWN cursor to select the file and press the RIGHT button to confirm the selection, then press the COPY/DEL button, the screen will show user COPY/ DELETE information in the right. Use the UP/DOWN cursor to select COPY and press ENTER to confirm, then user also use the UP/DOWN cursor to select the device and press the RIGHT to confirm that you want to store the copy file. After copying it, it will show

“Finished”. Press the ENTER to turn off the submenu and go back to the file list.

Feature Setup

Many of the picture frame functions can be adjusted to your preference. By using the SETUP option from the main menu, the following changes can be made: use the ENTER button and UP/

DOWN arrows to change the options.

Function

Language

Slideshow effect

Time

Default

Description

Includes English, French, Spanish

Off, Random, Fading, Bottom-to top, top-to- button, Left-to-right, right-to-left, door-close, door-open, hori-cross, verti-cross

Year/Month/Date/Time setup

Return to factory default setup

Calendar and Clock Display

From the main MENU screen, select Calendar/clock and press ENTER, the Calendar/ Clock screen will display. A picture slideshow will begin at the picture at the picture preview window at the right part of the screen.

Customer Support

For technical support or product service, see the table below or contact your reseller.

Note : You will need the product serial number.

Country/

Region

Web Site

T=Telephone

F=Fax

E-mail

Australia/New

Zealand

Canada

Europe

Hong Kong

India

Ireland (Eire) www.viewsonic.com.au

www.viewsonic.com

AUS=1800 880 818

NZ=0800 008 822

T (Toll-Free)= 1-866-463-4775

T (Toll)= 1-424-233-2533

F= 1-909-468-3757 [email protected]

[email protected]

www.viewsoniceurope.com

www.viewsoniceurope.com/uk/support/call-desk/ www.hk.viewsonic.com

T= 852 3102 2900 [email protected]

[email protected]

www.in.viewsonic.com

www.viewsoniceurope.com/ uk/ www.kr.viewsonic.com

T= 1800 11 9999 www.viewsoniceurope.com/ uk/support/call-desk/

T= 080 333 2131 [email protected]

[email protected]

Korea

Latin America

(Argentina)

Latin America

(Chile)

Latin America

(Columbia)

T= 0800-4441185

T=1230-020-7975

T= 01800-9-157235

Latin America

(Mexico)

Latin America

(Peru) www.viewsonic.com/la/

Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS

Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16

Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico www.viewsonic.com/la/

T= 001-8882328722

T= 0800-54565 [email protected]

[email protected]

Macau

Middle East

Puerto Rico & www.hk.viewsonic.com

ap.viewsonic.com/me/

Virgin Islands www.viewsonic.com

T= 853 2870 0303

Contact your reseller

T= 1-800-688-6688 (English)

T= 1-866-379-1304 (Spanish)

F= 1-909-468-3757 [email protected]

[email protected]

[email protected]

[email protected]

Singapore/

Malaysia/

Thailand www.viewsonic.com.sg

South Africa ap.viewsonic.com/za/

United

Kingdom www.viewsoniceurope.com/ uk/

United States www.viewsonic.com/la/ www.viewsonic.com/la/ www.viewsonic.com/la/ www.viewsonic.com

T= 65 6461 6044

Contact your reseller www.viewsoniceurope.com/ uk/support/call-desk/

T (Toll-Free)= 1-800-688-6688

T (Toll)= 1-424-233-2530

F= 1-909-468-3757 [email protected] [email protected]

[email protected]

[email protected]

[email protected]

service_gb@viewsoniceurope.

com [email protected]

Limited Warranty

VIEWSONIC Digital Photo Frame

ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.

Replacement product or parts may include remanufactured or refurbished parts or components.

ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from:

a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

b. Repair or attempted repair by anyone not authorized by ViewSonic.

c. Causes external to the product, such as electric power fluctuations or failure.

d. Use of supplies or parts not meeting ViewSonic’s specifications.

e. Normal wear and tear.

f. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.

1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer Support page). You will need to provide your product’s serial number.

2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.

4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:

1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by any other party.

4.3: ViewSonic DPF Warranty DPF_LW01 Rev. 1A 06-20-08

Mexico Limited Warranty

VIEWSONIC Digital Photo Frame

What the warranty covers:

ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.

Replacement product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:

ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

b. Repair or attempted repair by anyone not authorized by ViewSonic.

c. Causes external to the product, such as electric power fluctuations or failure.

d. Use of supplies or parts not meeting ViewSonic’s specifications.

e. Normal wear and tear. f. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.

How to get service:

For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.

For Your Records

Product Name: ______________________ Model Number: _______________________

Document Number: ____________________

Serial Number: ______________________ Purchase Date: ________________________

Extended Warranty Purchase? _______________(Y/N)

If so, what date does warranty expire? _____________________________________________

1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.

3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:

1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by any other party.

4. Repair or attempted repair by anyone not authorized by ViewSonic.

Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:

Name, address, of manufacturer and importers:

México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,

Col. San Fernando Huixquilucan, Estado de México

Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm

NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004

Hermosillo:

Distribuciones y Servicios Computacionales SA de

CV.

Villahermosa:

Compumantenimietnos Garantizados, S.A. de C.V.

AV. GREGORIO MENDEZ #1504

COL, FLORIDA C.P. 86040

Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09

E-Mail: [email protected]

Calle Juarez 284 local 2

Col. Bugambilias C.P: 83140

Tel: 01-66-22-14-9005

E-Mail: [email protected]

Puebla, Pue. (Matriz):

RENTA Y DATOS, S.A. DE C.V. Domicilio:

29 SUR 721 COL. LA PAZ

72160 PUEBLA, PUE.

Tel: 01(52).222.891.55.77 CON 10 LINEAS

E-Mail: [email protected]

Chihuahua

Soluciones Globales en Computación

C. Magisterio # 3321 Col. Magisterial

Chihuahua, Chih.

Tel: 4136954

E-Mail: [email protected]

Distrito Federal:

QPLUS, S.A. de C.V.

Av. Coyoacán 931

Col. Del Valle 03100, México, D.F.

Tel: 01(52)55-50-00-27-35

E-Mail : [email protected]

Guerrero Acapulco

GS Computación (Grupo Sesicomp)

Progreso #6-A, Colo Centro

39300 Acapulco, Guerrero

Tel: 744-48-32627

MERIDA:

ELECTROSER

Av Reforma No. 403Gx39 y 41

Mérida, Yucatán, México CP97000

Tel: (52) 999-925-1916

E-Mail: [email protected]

Tijuana:

STD

Av Ferrocarril Sonora #3780 L-C

Col 20 de Noviembre

Tijuana, Mexico

Veracruz, Ver.:

CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419

ENTRE PINZÓN Y ALVARADO

Fracc. Reforma C.P. 91919

Tel: 01-22-91-00-31-67

E-Mail: [email protected]

Cuernavaca

Compusupport de Cuernavaca SA de CV

Francisco Leyva # 178 Col. Miguel Hidalgo

C.P. 62040, Cuernavaca Morelos

Tel: 01 777 3180579 / 01 777 3124014

E-Mail: [email protected]

Guadalajara, Jal.:

SERVICRECE, S.A. de C.V.

Av. Niños Héroes # 2281

Col. Arcos Sur, Sector Juárez

44170, Guadalajara, Jalisco

Tel: 01(52)33-36-15-15-43

E-Mail: [email protected]

Monterrey:

Global Product Services

Mar Caribe # 1987, Esquina con Golfo Pérsico

Fracc. Bernardo Reyes, CP 64280

Monterrey N.L. México

Tel: 8129-5103

E-Mail: [email protected]

Oaxaca, Oax.:

CENTRO DE DISTRIBUCION Y

SERVICIO, S.A. de C.V.

Murguía # 708 P.A., Col. Centro, 68000, Oaxaca

Tel: 01(52)95-15-15-22-22

Fax: 01(52)95-15-13-67-00

E-Mail. [email protected]

FOR USA SUPPORT:

ViewSonic Corporation

381 Brea Canyon Road, Walnut, CA. 91789 USA

Tel: 800-688-6688 (English); 866-323-8056 (Spanish);

Fax: 1-800-685-7276

E-Mail: http://www.viewsonic.com

4.3: ViewSonic Mexico Limited Warranty DPF_LW03 Rev. 1A 06-25-07