BOSTON BRAVO ® II
The Boston Bravo II is a compact multipurpose, high
performance loudspeaker whose unique design allows
it to fit discreetly anywhere in your home especially on
walls, in corners, and other tight locations. Sometimes
called the on-wall/in-wall, the Bravo I I is the perfect
choice when you want the speaker to disappear, but
can’t cut holes in your walls. Its metal grille and
contemporary styling also make it the ideal solution
for flat panel TV sound.
Your Sound Solution™
CORNER / Corner placement is discreet
yet ideal for theater, stereo, or
whole-house applications. Its unique
bracket and 90° corner inserts create
a tight, flush fit to any ceiling.
WALL / Mounting Bravo II flush to a
wall is equally simple when the corner
inserts are removed from the bracket.
CEILING / Horizontal placement in the
wall/ceiling corner offers exceptional,
wide-area dispersion, and the ultimate in
out-of-the-way placement—perfect for
commercial applications too.
FLOOR / For a completely hidden system,
or a unique surround effect, Bravo II can
also be positioned in the corner of a
floor and wall.
BRAVO II CENTER CHANNEL / When it comes
to reproducing critical on-screen dialogue,
the magnetically shielded Bravo II Center
is right at home on top of your TV.
(available in black only)
SPECIFICATIONS
FREQUENCY RESPONSE (±3dB)
RECOMMENDED AMPLIFIER POWER
NOMINAL IMPEDANCE
SENSITIVITY [1 watt (2.83v) at 1m]
BASS UNIT
TWEETER
CROSSOVER FREQUENCY
WEIGHT
DIMENSIONS (HxWxD)
FINISH
The Bravo I I ’s quarter-cylinder, wedge-shaped housing contains a
41⁄2-inch woofer and a 1-inch VR ® aluminum dome tweeter with AMD ™.
An adaptable mounting bracket allows it be placed in a wide variety
of locations for optimum sound quality and three-dimensional
imaging. When a pair is placed vertically in the corners of a room,
the Bravo I I creates a surprisingly wide sonic window, providing true
stereo sound reproduction over a broad area. A unique air channel
leading to the exterior vent contributes to the speaker’s thin profile
while allowing it to breathe openly and provide deep bass response.
To match any décor, the Bravo I I is available in black, white, or silver.
The Boston Bravo I I Center channel is available with MagnaGuard ®
magnetic video shielding for use with conventional tube televisions.
Unique wedge-shape design
allows for placement in corners,
ceilings, and other tight locations
Versatile mounting brackets and
hardware included
Accurate sound dispersion in both
vertical and horizontal positions
Available in black, white or silver
with matching metal grille
Aluminum dome tweeter with
AMD™ delivers smooth, natural
highs
Special center channel is
magnetically shielded
Vented enclosure extends
low frequencies
Mount Bravo II directly to a
single gang electrical block in
new construction
BRAVO II
80Hz–20kHz
15–125 watts
8 ohms
89dB
4 1⁄2 " (115mm)
1" (25mm) aluminum dome w/AMD™
3000Hz
5 lbs (2.25kg)
691⁄ 6 x 1438⁄ x 438⁄ "
(167 x 366 x 112mm)
Black, white, or silver
BRAVO II CENTER
80Hz–20kHz
15–125 watts
8 ohms
89dB
4 1⁄2 " (115mm)
1" (25mm) aluminum dome w/AMD™
2500Hz
5.5 lbs (2.5kg)
612⁄ x 1438⁄ x 438⁄ "
(167 x 366 x 112mm)
Black only
©2004 Boston Acoustics, Inc. All Rights Reserved. Boston, Boston Acoustics, the Boston Acoustics logo, Bravo,VR, and MagnaGuard are registered trademarks, and AMD, The Boston Sound, and
Your Sound Solution are trademarks of Boston Acoustics, Inc. Specifications are subject to change without notice.
Boston Acoustics, Inc., 300 Jubilee Drive, Peabody, MA 01960 USA
">
