QuickNet
™
Cassette Cable Manager and
Patch Field Protection Cover
S P E C I F I C A T I O N S H E E T s p e c i f i c a t i o n s
The fiber cassette rear cable manager (FQCRCM) organizes
MTP* interconnect cable and traditional fiber cable for SFQ (Small
Form-factor QuickNet ™ ) series MTP* fiber optic cassettes, HDQ
(High-Density QuickNet ™ ) series high density fiber optic cassettes, and pre-terminated cable assemblies with cassettes. The cassette rear cable manager mounts to the rear of a standard EIA 19" wide telecommunications rack and provides a secure location to support a maximum of sixteen MTP* interconnect cable assemblies. Interconnect cables and traditional fiber cables shall be secured with fiber management spools.
The fiber patch field protection cover (FPFPC1) hides and protects the front patch field and shall minimize the potential for connector damage and fiber attenuation. The labeling card identifies ports and d-rings provide physical support and route fibers into the vertical manager.
t e c h n i c a l i n f o r m a t i o n
Dimensions:
Mounting options:
FQCRCM
FPFPC1
1.40"H x 19.0"W x 9.56"D (35.7mm x 482.6mm x 242.9mm) (cassette rear cable manager) 1.72"H x 19.38"L (43.71mm x 492.25mm)
(patch field protection cover)
Mounts to standard EIA 19" racks k e y f e a t u r e s a n d b e n e f i t s
Cassette Rear Cable Manager (FQCRCM)
Rear mounting design Provides easy access to fiber cable; rear mounting design conserves data center floor space by reducing or eliminating the need for horizontal cable managers; occupies less than 1 RU space
Fiber management spools Improved fiber protection, ease of maintenance, and enhanced cable management; manages rear fiber cable slack and provides for fiber cable routing guide; fiber management spools organize cables for optimum finished appearance
Modularity Offers flexibility by accommodating QuickNet ™ MTP* Interconnect Cable and traditional fiber cable; for use with QuickNet
Fiber Optic Cassettes, QuickNet ™
™ SFQ Series MTP*
HDQ Series High Density Fiber
Optic Cassettes, and QuickNet ™ with Cassettes
Pre-Terminated Cable Assemblies
Fiber Patch Field Protection Cover (FPFPC1)
Front post installation Hides front patch field, protects front patch field. Mounts into a variety of Panduit Racks and Cabinets including 2-post and 4-post racks,
Net-SERV and Ne-Access cabinet and directly supports Opticom,
MiniCom, and QuickNet FAPs, Adapter Panels, and Cassettes
Labeling card and d-rings Identifies patch field for optimum organization. D-rings provide physical support to fiber, and routes fiber into vertical manager a p p l i c a t i o n s
The SFQ cassette rear cable manager is used to support and manage MTP* Interconnect Cable and traditional fiber cable. It provides strain relief, bend radius control, superior aesthetics, and improved organization and routing of cables. The QuickNet ™
Cassette Rear Cable Manager is less than 1 RU high, and is designed to support MTP* Interconnect
Cable from up to sixteen QuickNet or up to two QuickNet ™
™ SFQ Cassettes
HDQ Cassettes installed in 2 RU space. The QuickNet ™ Cassette Rear Cable
Manager installs on the rear of a standard EIA
19" rack.
w w w. p a n d u i t . c o m
QuickNet ™ Fiber patch Field Protection Cover mounts into a variety of Panduit Racks and Cabinets including 2-post and 4-post racks, Netserve and
NetAccess cabinets. Directly supports Opticom,
MiniCom, and QuickNet FAPs, Adapter Panels, and
Cassettes. Protects front patch field and minimizes the potential for connector damage and fiber attentuation. The QuickNet Cassette Rear Cable
Manager and Fiber Patch Field Protection Cover contribute to network integrity and reduce time and cost associated with cable routing and maintenance.
QuickNet ™ Cassette Rear
Cable Manager
Fiber cassette rear cable manager: FQCRCM
QuickNet ™ Fiber Patch Field
Protection Cover
1 RU fiber patch field protection cover: FPFPC1
QuickNet ™ HDQ Series High
Density Fiber Optic Cassettes –
B-Type Port Labeling
10Gig
50/125µm OM4:
Optimized 10Gig
50/125µm OM4:
10Gig
50/125µm OM3:
Optimized 10Gig
50/125µm OM3:
F1RBZN-9608-10^
F1RBZO-9608-10^
F1RBXN-9608-10^
F1RBXO-9608-10^
QuickNet ™ HDQ Series High
Density Fiber Optic Cassettes –
C-Type Port Labeling
10Gig
50/125µm OM4:
Optimized 10Gig
50/125µm OM4:
F1RCZN-9612-10^
F1RCZO-9612-10^
10Gig
50/125µm OM3:
Optimized 10Gig
50/125µm OM3:
F1RCXN-9612-10^
F1RCXO-9612-10^
QuickNet ™ HDQ Series Angled High
Density Fiber Optic Cassettes –
S-Type Port Labeling
10Gig
50/125µm OM4:
Optimized 10Gig
50/125µm OM4:
10Gig
50/125µm OM3:
Optimized 10Gig
50/125µm OM3:
F1ASZN-9612-10^
F1ASZO-9612-10^
F1ASXN-9612-10^
F1ASXO-9612-10^
QuickNet ™ MTP* Trunk
Cable Assemblies
12-fiber:
24-fiber:
48-fiber:
FSPX1255F^^A
FSPX2455F^^A
FSPX4855F^^A
QuickNet ™ MTP* Interconnect
Cable Assemblies (Female MTP* to Female MTP*)
12-fiber: FX12D5-5M^^Y
QuickNet ™ Cassette MTP*
Cleaning Tool
For all MTP* connectors: FIBCCT
Reel Type MTP* Connector
Cleaning Tools
Female MTPs*: FMTPFCT
Male MTPs*: FMTPMFCT
Reel refill (qty. 6): FMTPRR6
^Use S for Standard Polarity and F for
Flipped Polarity.
^^100, 150, and 200 ft. are standard lengths; additional lengths are available. Contact
Customer Service for actual lead times.
*MTP is a registered trademark of Conec Ltd.
QuickNet
™
Cassette Rear Cable Manager
9.56 [242.9]
19.00 [482.6]
1.40 [35.7]
Left mounting bracket
FQCRCM
Patch panel cover
Open cable management ring
Right mounting bracket
FPFPC1
Dimensions are in inches. [Dimensions in brackets are metric].
PANDUIT CANADA
Markham, Ontario [email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK [email protected]
Phone: 44.20.8601.7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore [email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan [email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico [email protected]
Phone: 52.33.3777.6000
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia [email protected]
Phone: 61.3.9794.9020
© 2013 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP60--WW-ENG
Replaces FBSP44
2/2013
