Systems

ENGLISH

3

&

5

HIGHEST

requirements for modern audio installations regarding their sound pressure level, coverage and sound quality can only be achieved using active multi-component loudspeaker systems where the audio signal’s individual frequency ranges are separately amplified and reproduced.

2-way installations with additional

ACTIVE

sub woofer systems probably offer the best price-performance ratio. The low frequency range of the audio signal is reproduced by the sub woofers while high-quality full range cabinets take care of the Mid/Hi frequencies and vocals.

THE

PowerMax 3 system - the direct successor of the legendary

P3 Systems - consists of two 12“

2-way cabinets F120, two 15“ sub woofers F5, one system power amplifier PM2600, four system cables and two loud-speaker stand poles. So, this compact, active

2-way system is ready for operation.

The system power amplifier includes the PowerMax controller and provides 2 x 700 W in the bass and 2 x 600 W in the Mid/Hi range. The system cabling ensures quick and easy installation and highest operational reliability. It is possible to operate two Mid/Hi cabinets and two sub woofers per stereo side on a single PM2600.

3 year warranty.

System

3 PowerMax 3 system: F5 & F120 on a PM2600

F5 & F120

F120

F5

2 x F120

System

3

2 x F5

PM2600

4 x Speakon system cable 15m

2 x loudspeaker stand poles

ONE

of the essential advantages when using active

2-way systems with additional sub woofers lies in the fact that the vocals are not divided between several speaker systems. This, in return, offers more convenience when adjusting the sound system. Different than with active 3- or 4-way configurations – complicated analyzing and measuring sound fields are not necessary.

ON

small stages or rooms, using only a monaural sub woofer is absolutely sufficient, since the locating of low-frequency sound is merely impossible under these conditions. For bigger stages it is indispensable to use separate sub woofers for both sides. Otherwise, the level difference between bass and treble would result in an audible degradation of the overall sound. Of course, incorporating a centrally located sub woofer can additionally improve the sound quality.

F8 & F150

F150

F8

2 x F150

System

5

2 x F8

PM2600

4 x Speakon system cable 15m

2 x loudspeaker stand poles

THE

PowerMax 5 system - the direct successor of the legendary

P5 Systems - consists of two 15“

2-way cabinets F150, two 18“ sub woofers F8, one system power amplifier PM2600, four system cables and two loud-speaker stand poles. So, this compact, active

2-way system is ready for operation.

The system power amplifier includes the PowerMax controller and provides 2 x 700 W in the bass and 2 x 600 W in the Mid/Hi range. The system cabling ensures quick and easy installation and highest operational reliability. It is possible to operate two Mid/Hi cabinets and two sub woofers per stereo side on a single PM2600.

3 year warranty.

PowerMax 5 system: F8 & F150 on a PM2600 5

System

System

3

2 x F120 12“ Mid/Hi cabinet

2 x F5 15“ sub woofer

1 x PM2600 system power amplifier

4 x PSS 415 Speakon system cable 15 m

2 x PCL 880 loudspeaker stand poles

System

2 x F150 15“ Mid/Hi cabinet

5

2 x F8 18“ sub woofer

1 x PM2600 system power amplifier

4 x PSS 415 Speakon system cable 15 m

2 x PCL 880 loudspeaker stand poles

PM2600

F 120 F 5 F 150 F 8

Technical Specifications

Type

F120

Design

Components:

Nominal power rating RMS

Program power capacity

Frequency response (-10 dB)

Nominal SPL (1W/1m)

Max. SPL*:

Impedance:

Crossover frequencies:

Dimensions:

Width:

Height:

Depth:

Weight:

LO

HI

2-way

1 x 12“

EVM 12L Pro-Line

DH 2T

HT 94

300 W

600 W

75 Hz-18 kHz

100 dB

128 dB

8 Ω

1.6 kHz

436 mm

629 mm

339 mm

21.5 kg

* calculated with program power

F150

2-way

1 x 15“

EVM 15 L Pro-Line

DH 2T

HT 94

400 W

800 W

70 Hz-18 kHz

102 dB

131 dB

8 Ω

1.6 kHz

522 mm

755 mm

395 mm

26.5 kg

F5

Subwoofer

1 x 15“

-

EV DL15X

-

400 W

800 W

48 Hz-280 Hz

100 dB

129 dB

8 Ω

160 Hz

436 mm

617 mm

674 mm

30.5 kg

PM2600

Load Impedance

Maximum Midband Output Power, THD = 1%, 1kHz, 60Hz

Rated Output Power THD < 0.1%

Maximum Single Channel Output Power

Dynamic-Headroom, IHF-A

Maximum RMS Voltage Swing, THD = 1%

Crossover Type

Crossover Frequency

Lo-Cut

Frequency Response -3dB, ref. 1kHz, Lo-Cut

Minimum Load Impedance

Input Sensitivity at rated output power @ 4Ω

Maximum Input Level

THD at rated output power, MBW =80kHz

Crosstalk

Slew Rate

Power Bandwith THD = 1%, ref. 1kHz, half power @ 4Ω

Input Impedance 20Hz ... 20kHz, balanced

Damping Factor

Signal-to-Noise Ratio, A-weighted

Power Requirements

Power Consumption at 1/8 maximum output power @ 4Ω

Protection

8Ω

HI-Channels

4Ω

380W

300W

400W

58.7V

700W

600W

750W

PowerMax12*, Stereo active 2-way

90 Hz

12dB/octave, 25Hz at -3dB ref. 1kHz

25Hz ... 45kHz

2.5 Ω

0dBu (775mV)

+21dBu (8.7V)

< 0.05%

< -60dB

30V/µs

10Hz ... 50kHz

20Ω

> 300

> 100dB

230V, 50Hz ... 60Hz

1800W

Audio limiter (APC), TBC, High temperature,

DC, HF, Back-EMF, Peak current limiter,

Inrush current limiter, Turn-on delay

Front-to-rear, 4-stage-fans

I

483 x 177 x 426

30kg

8Ω

LO-Channels

4Ω

380W

350W

400W

700W

700W

750W

58.7V

Cooling

Safety Class

Dimensions (W x H x D), mm

Weight

*Patent pending; Amplifier at rated conditions, all channels driven, 8Ω loads, HI-Channel rated at 1kHz, LO-Channel rated at 60Hz unless otherwise specified.

Note: 0dBu = 0.775V

EVI Audio GmbH · Hirschberger Ring 45 · D-94315 Straubing

Tel: +49 (0) 94 21 / 706 - 0 · Fax: +49 (0) 94 21 / 706 - 265 · www.dynacord.de

F8

Subwoofer

1 x 18“

-

EVX 180A

-

500 W

1000 W

40 Hz - 300 Hz

100 dB

130 dB

8 Ω

160 Hz

522 mm

737 mm

674 mm

38.0 kg