advertisement
ProjectorCam
QUICK START GUIDE
ProjectorCam
Contents
WEEE Notice ....................................................................... 6
CE Regulatory Notice ......................................................... 6
Safety Instructions ............................................................. 7
Projector LED Warning Instructions ................................ 7
Battery Safety Instructions................................................ 8
EN
1 Introduction ................................................................... 9
1.1 System requirements .............................................. 9
1.2 Features.................................................................. 10
1.3 Package contents .................................................. 10
1.4 External view ......................................................... 11
1.5 Buttons operation ................................................. 13
1.6 Adjusting the LCD display .................................... 14
2 Getting Started ............................................................ 15
2.1 Inserting the memory card(s) ............................... 15
2.2 Inserting the battery .............................................. 17
2.3 Charging the battery ............................................. 19
2.4 Turning on/off the digital video camera .............. 20
2.5 Changing modes ................................................... 20
2.6 Initial Settings ........................................................ 21
2.6.1 Setting the date and time .............................. 21
2.6.2 Setting the language ..................................... 21
Page 1
ProjectorCam
3 Using the Digital Video Camera ................................. 22
3.1 Recording videos .................................................. 22
3.1.1 The recording screen .................................... 22
3.2 Video menu ............................................................ 25
3.2.1 Quality .......................................................... 25
3.2.2
3.2.3
Pre-recording ................................................ 26
Time Lapse ................................................... 27
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
Motion Detection ........................................... 28
White Balance .............................................. 29
AE Meter ....................................................... 29
Digital Effect .................................................. 30
Digital Zoom .................................................. 31
3.3 Playback videos .................................................... 32
3.3.1 Slow motion playback ................................... 34
3.3.2 Capturing a still image in video playback ..... 35
3.4 Video playback settings ........................................ 36
3.4.1 Protect File ................................................... 36
3.4.2
3.4.3
Play Option ................................................... 37
Delete File .................................................... 38
3.5 Shooting photos .................................................... 40
3.5.1 The shooting screen ..................................... 40
3.6 Camera menu ......................................................... 43
3.6.1 Capture Mode ............................................... 43
3.6.2
3.6.3
3.6.4
Instant View .................................................. 44
Self Timer ..................................................... 44
White Balance .............................................. 45
EN
Page 2
ProjectorCam
3.6.5 AE Meter ....................................................... 46
3.6.6
3.6.7
3.6.8
AE ISO .......................................................... 46
Digital Effect .................................................. 47
Digital Zoom .................................................. 48
3.7 Viewing photos ...................................................... 49
3.8 Photo playback settings ....................................... 51
3.8.1 Protect File ................................................... 51
3.8.2
3.8.3
3.8.4
3.8.5
Slide Show .................................................... 52
Delete File .................................................... 53
DPOF ............................................................ 55
Rotate ........................................................... 56
3.9 Using the built-in projector .................................. 57
3.9.1 Activate the projector function ...................... 57
3.9.2 Projector buttons operation .......................... 58
EN
4 Using Setup menu ...................................................... 59
4.1 Setup menu ............................................................ 59
4.1.1 System .......................................................... 60
4.1.2
4.1.3
4.1.4
File Number .................................................. 60
Time Setup ................................................... 61
Format .......................................................... 61
4.1.5
4.1.6
4.1.7
4.1.8
Default Setting .............................................. 62
LCD Brightness ............................................ 63
Date/Time Stamp .......................................... 63
Auto Power Off ............................................. 64
4.1.9 Language ...................................................... 65
4.1.10 Information .................................................... 65
Page 3
ProjectorCam
4.1.11 Beep Sound .................................................. 66
4.1.12 Start Logo ..................................................... 67
4.1.13 Anti-flicker ..................................................... 67
4.1.14 Recording Audio Gain ................................... 68
4.1.15 SD ............................................................... 69
4.1.16 Auto Hide Info ............................................... 69
EN
7
8
5 Connecting to other devices ..................................... 70
5.1 Connecting to the computer ................................ 70
5.2 Connecting to TV ................................................... 71
6 Installing the Software ................................................ 72
Editing software .......................................................... 73
Specifications .............................................................. 74
Page 4
ProjectorCam EN
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Page 5
ProjectorCam EN
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union
This symbol on the product or on the packaging indicates that this can not be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment.
CE Regulatory Notice
This equipment complies with the requirements set out in the Council
Directives on the Approximation of the Laws of the Member States relating
Electromagnetic Compatibility (2004/108/EC); the Low Voltage Directive
(2006/95/EC); the Restriction of The Use of Certain Hazardous Substances in
Electrical And Electronic Equipment Directive (2002/95/EC), Turkish EEE
Directive; the Commission Regulation (EC) No 1275/2008 implementing
Directive 2005/32/EC of the European Parliament and of the Council with regard to eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment, and the Directive 2009/125/EC of the European parliament and of the council establishing a framework for the setting of eco-design requirements for energy-related products.
Page 6
ProjectorCam
Safety Instructions
EN
Do not expose the device to rain or use it in areas near water.
Do not wrap the device or store it in a hot environment.
Do not place the device on unstable surfaces or near any heat sources such as stoves, heaters, or etc.
Clean only with dry cloth.
Do not subject the LCD display to impact.
Keep the battery out of reach of children.
When inserting battery, pay careful attention to the polarity of the terminals.
Do not fire the flash close to anyone’s eyes.
Do not use the device while you are driving or riding a bike/motorcycle.
If the device has fallen or its case has been damaged, turn off the power and remove the battery. Consult authorized dealers or repair service center.
Only use the supplied accessories.
Projector LED Warning Instructions
Risk Group 2
CAUTION. Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. It may be harmful to eyes.
Page 7
ProjectorCam
Battery Safety Instructions
EN
Use the authorized charger only.
Never disassemble by yourself.
Never short-circuit the battery.
Dispose of the battery properly.
Exposing the battery to open flames can cause explosion.
Ambient temperature for placing or storing battery must not exceed
80
℃
(176
℉
). Upper temperature limit for long-term battery storage must be no more than 60
℃
(140
℉
). Make sure the limit is not exceeded for more than 24 hours, or the battery may distend and cause danger.
Li-ion Battery Pack
MODEL: CA NP40
3.7
1200mAh 4.44Wh
1. Be sure to use only the supplied battery and charger.
2. The use of any other type of battery or charger may damage the device and void your warranty.
3. Be sure to follow local regulations for disposing of batteries.
Page 8
ProjectorCam
1 Introduction
Thank you for purchasing this advanced Digital Video Camera.
This user guide will get you started and ready to make the most of your digital video camera.
1.1 System requirements
For PC connection, be sure your PC meets the following specifications:
For Windows:
•
Windows XP SP2 / Vista / Win 7
•
Processor with at least Pentium IV 3.2GHz / AMD Athlon FX
2.6GHz or higher
•
2GB RAM at least
• nVIDIA Geforce 7600GT / Ati X1600 series or later
•
USB port
•
16-bit color display compatible monitor
(1280x1024, 32-bit color display recommended)
•
250 MB of available hard disk space
•
CD-ROM drive
For Macintosh:
•
Mac OS 10.4 or higher
•
Power Mac G3 or higher
•
Minimum 256MB RAM
•
110MB of available hard disk space
•
USB port
•
CD-ROM drive
EN
Page 9
ProjectorCam
1.2 Features
•
Full HD (1920 x 1080p) camcorder with embedded Pico \ projector
•
10X optical zoom with real
‐ time auto focus
•
3’’ (7.6 cm) touch LCD display
•
Projects pictures up to 50‘’ (127 cm) diagonal
•
Projector with DLP optical technology and RGB
•
Pre-recording
•
Time lapse recording
•
Motion detection recording
•
Slideshow
•
Dual memory card slot
1.3 Package contents
The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately.
Digital video camera CD-ROM Pouch
EN
Quick start guide HDMI cable Video cable
USB cable Power adapter Lithium battery
Page 10
ProjectorCam
1.4 External view
Top, Bottom, and Front views
Top View
Bottom View
EN
4
5
1
2
3
6
7
8
Front View
No. Item
1 Speaker
2 Zoom Lever
3 Projector Focus Lever
4 Tripod Socket
5
Battery/Memory Card
Cover
No.
6
7
8
9
10
Lens
Item
LED Light
Self Timer Indicator
Projector Lens
Microphone
9
10
Page 11
ProjectorCam
Left, Right, and Rear views
Left View
Right View
EN
1
2
Rear View
4
5
3
No. Item
1 Hand Strap
2 Power Button
3
USB/HDMI Connector
Cover
No.
4
5
Item
LED Indicator
Record Button
Page 12
ProjectorCam
1.5 Buttons operation
See the table below for a description of each button’s function.
EN
Item Function
Power Button Press to turn the digital video camera on or off.
Record Button
Zoom Lever
•
In Video mode, press to start recording a video. Press it again to stop recording.
•
In Camera mode, press to capture a photo.
•
In Video and Camera modes, slide to the right/left to zoom in/out when recording videos or shooting photos.
•
In Video Playback mode, slide to the right/left to adjust the volume. The volume can also be adjusted during the playback.
•
In Camera Playback mode, slide to the right/left to zoom in/out your photo.
Projector Focus
Lever
•
In Video Playback and Photo Playback modes, slide to the right/left to adjust the projector focus.
Page 13
ProjectorCam
1.6 Adjusting the LCD display
Flip the LCD display outwards 90° to fully open.
EN
Flip and twist the LCD screen at the appropriate angle to suit your viewing preference.
Page 14
ProjectorCam
2 Getting Started
EN
2.1 Inserting the memory card(s)
This device supports dual memory card slot that allows you to insert two memory cards at the same time. You can insert one SD card and one micro SD card into the digital video camera.
1. Push the battery/memory card cover latch to open the battery/memory card cover as shown in the illustration.
2. Insert the memory card(s).
Page 15
ProjectorCam
3. Close the battery/memory card cover.
EN
Note:
Do not remove or insert the memory card when the digital video camera is turned on. This may damage the memory card.
Page 16
ProjectorCam
2.2 Inserting the battery
Only use the specified rechargeable battery for the digital video camera.
1. Push the battery/memory card cover latch to open the battery/memory card cover as shown in the illustration.
EN
2. Fully insert the battery with the correct orientation until it clicks into place.
Page 17
ProjectorCam
3. Close the battery/memory card cover.
EN
Note:
1. Turn off the digital video camera before removing the battery.
2. The battery may be warm after being used. This is normal and not a malfunction.
To remove the battery:
1. Push the battery/memory card cover latch to open the battery/memory card cover.
2. Press and hold the latch as shown in the illustration and remove the battery from the battery compartment.
Page 18
ProjectorCam
2.3 Charging the battery
Use the supplied power adapter to charge the battery.
EN
1. Open the USB/HDMI connector cover.
2. Connect one end of the power adapter to the USB connector of the digital video camera.
3. Plug the other end of the power adapter to the wall outlet.
Note:
1. The red LED lights up while the battery is charging.
2. The charging time depends on the current battery capacity and charging conditions.
3. Please take note if the environment temperature reaches 45°C or above, the adapter can still supply power to the digital video camera, but it will not charge the Lithium-ion battery.
This is the characteristic of Lithium-ion and is not a malfunction.
Page 19
ProjectorCam
2.4 Turning on/off the digital video camera
There are two ways to turn on/off the power:
•
Open/close the LCD panel.
•
Press the Power button.
2.5 Changing modes
The digital video camera has two recording modes:
•
Video mode: Record videos.
•
Camera mode: Shoot photos.
EN
By default, the digital video camera is set to Video mode.
In Video mode, touch the upper left corner icon ( ) to switch to
Camera mode.
In Camera mode, touch the upper left corner icon ( ) to switch to Video mode.
Page 20
ProjectorCam
2.6 Initial Settings
Before using the digital video camera, you may want to set up the date and time and screen language settings.
EN
2.6.1 Setting the date and time
1. To adjust the field item, touch the respective field to select the field and touch / to adjust the value.
2. Repeat step 1 to adjust other fields.
3. Touch to save your changes.
Note:
Touch / to adjust the value. Touch / to go to the previous/next field.
2.6.2 Setting the language
1. Touch the language option to select the desired language.
Note:
Touch / to scroll through the available menu options. Touch / to go to the previous/next page.
Page 21
ProjectorCam
3 Using the Digital Video Camera
EN
3.1 Recording videos
1. Turn on the digital video camera. By default, the device is set to
Video mode. In Camera mode, touch to switch to Video mode.
2. Press the Record button to start recording the video. Press it again to stop recording.
While recording, you can also use the Zoom lever to zoom/in on the subject.
3.1.1 The recording screen
6 7 8 9
1
2
3
4
10
11
12
13
14
5
15
16
No.
Icon
1
Item
Video mode
Description
Indicates the digital video camera is currently in Video mode.
Touch to switch to Camera mode.
Page 22
ProjectorCam
No.
Icon Item
2
3
4
Description
Card type
Indicates the memory card type in use.
White balance
Indicates the current white balance mode.
Metering mode
Indicates the current AE metering mode.
EN
5
6
7
8
9
10
11
Menu Touch to enter the Video menu.
Motion detection
Indicates Motion detection recording mode is activated.
Video resolution
AF setting
LED icon
Scene mode
Touch to select the desired video resolution.
Available options: FHD / HD (60) /
HD (30)
Touch to select the desired AF setting.
Available options: AF / Lock
Touch to select the suitable lighting mode.
Available options: Off / On
Touch to select the desired scene mode:
Available options: Auto / Night /
Sports / Landscape / Portrait /
Sunset / Sand/Snow / Flower /
Firework / Backlight / Beauty
Time duration
Indicates the remaining recording time available in the memory card.
Page 23
ProjectorCam
No.
Icon Item
12
13
14
15
Description
Battery status
Indicates the remaining battery power.
Zoom indicator
Indicates the zoom status.
Time lapse
Indicates the Time lapse recording is set to 5 minutes.
EV compensation
Indicates the current EV compensation.
Touch value.
/ to adjust the EV
EN
16 Playback Touch to enter Playback mode.
Page 24
ProjectorCam
3.2 Video menu
The Video menu is used to adjust settings in Video mode.
EN
1. Turn on the digital video camera. By default, the device is set to
Video mode. In Camera mode, touch to switch to Video mode.
2. Touch to enter the Video menu.
3. Touch the desired menu option to enter the menu.
4. Touch an option to select the desired setting.
5. Touch to exit the menu.
Note:
Touch / to scroll through the available menu options. Touch / to go to the previous/next page.
3.2.1 Quality
Set the video quality.
1. In Video mode, touch to enter the Video menu.
2. Touch Quality to enter the menu.
3. Touch an option to select the desired setting (Super Fine,
Fine, or Normal).
Page 25
ProjectorCam
3.2.2 Pre-recording
Pre-recording function records images 3 seconds before you press the Record button.
EN
1. In Video mode, touch to enter the Video menu.
2. Touch Pre-recording to enter the menu.
3. Touch the option to select On or Off.
Note:
If Pre-recording is enabled, Time Lapse and Motion Detection will be disabled.
Page 26
ProjectorCam EN
3.2.3 Time Lapse
With the Time Lapse feature, the camcorder records 1 frame every 1 minute, 5 minutes, or every 30 minutes depending on the setting.
For instance, when choosing time lapse as 1 minute at Full HD 30 fps, 720 frames are recorded during 12 hours of recording period.
The length of the video clip will be 24 seconds (720 frames / 30 fps =
24 seconds). When playing back the video, you are given the impression that the video is playback in fast forward speed.
You can use this feature to record videos such as evolution of a construction project, weather changes, tree growth, or flower blossom.
Note:
It’s normal that during time lapse recording the timer on the screen displays by minutes instead of seconds.
00:01:00
00:02:00
…
1. In Video mode, touch to enter the Video menu.
2. Touch Time Lapse to enter the menu.
3. Touch an option to select the desired setting.
•
Off: Disable this feature.
•
1 min: 1-minute time lapse recording.
Page 27
ProjectorCam
•
5 min: 5-minute time lapse recording.
•
30 min: 30-minute time lapse recording.
Note:
If Time Lapse is enabled, Pre-recording and Motion Detection will be disabled.
3.2.4 Motion Detection
With Motion Detection feature, the video recording automatically starts if the digital video camera detects any movement.
1. In Video mode, touch to enter the Video menu.
2. Touch Motion Detection to enter the menu.
3. Touch the option to select On or Off.
Note:
If Motion Detection is enabled, Time Lapse and Pre-recording will be disabled.
EN
Page 28
ProjectorCam EN
3.2.5 White Balance
Set the white balance when recording videos under specific lighting conditions.
1. In Video mode, touch to enter the Video menu.
2. Touch White Balance to enter the menu.
3. Touch an option to select the desired setting.
•
Auto: Set the white balance automatically.
•
Incandescent: Indoor under tungsten lighting condition.
•
Sunny: Bright daylight shooting.
•
Cloudy: Cloudy day or shady condition.
•
Fluorescent: Indoor under fluorescent lighting.
•
Preset: Manually adjust the white balance.
3.2.6 AE Meter
Select the metering method for calculating the exposure.
1. In Video mode, touch to enter the Video menu.
2. Touch AE meter to enter the menu.
3. Touch an option to select the
Page 29
ProjectorCam desired setting.
EN
•
Average: Calculate exposure based on the entire image area.
•
Center: Calculate exposure based on the entire image area, but provides greater exposure to the center of a subject.
•
Spot: Calculate exposure based on the small portion of the screen center.
3.2.7 Digital Effect
Set the color filter effect to be applied on the video you want to record.
1. In Video mode, touch to enter the Video menu.
2. Touch Digital Effect to enter the menu.
3. Touch an option to select the desired setting.
•
Off: No digital effect is used.
•
Art: Add an oil painting color effect.
•
Sepia: Add brown color effect.
•
Negative: Add a negative color effect.
•
Black/White: Add a monochrome color effect.
•
Vivid: Add a bright color tone effect.
Page 30
ProjectorCam
3.2.8 Digital Zoom
Set whether or not to use digital zoom when recording videos.
1. In Video mode, touch to enter the Video menu.
2. Touch Digital Zoom to enter the menu.
3. Touch the option to select On or Off.
EN
Page 31
ProjectorCam
3.3 Playback videos
1. In Video mode, touch to enter Video Playback mode.
2. Touch the video to view it in full screen.
EN
3. Touch to play the video.
4. Touch the corresponding icons to adjust the volume and playback speed.
Note:
You can also slide the zoom lever right or left to adjust the playback volume.
1
2
5 6 7 8
9
10
3
4
No.
Icon
1
11
12
13
14
Item
Description
Playback mode
Indicates the digital video camera is in Video Playback mode.
2
Volume up
Touch to increase playback volume.
Page 32
ProjectorCam
No.
Icon Item
3
4
5
6
7
8
Volume down
Menu
Description
Touch to decrease playback volume.
Touch to enter the Video Playback menu.
File number
Slow motion
Indicates the file number.
Touch to enable or disable slow motion playback.
Video resolution
Indicates the file resolution.
Protect Indicates the file is protected.
EN
9
10
Time duration
Battery status
Indicates the played duration / total video duration.
Indicates the remaining battery power.
11
Previous
Touch to view the previous video.
Rewind
Touch to rewind the video at speed
2x~64X.
12 Play Touch to play the video.
13
14
Next
Fast forward
Return
Touch to view the next video.
Touch to fast forward the video at speed 2x~64X.
Touch to return to the previous screen.
Page 33
ProjectorCam
3.3.1 Slow motion playback
To start playback in slow motion:
1. In Video mode, touch to enter Video Playback mode.
2. Touch the video to view it in full screen.
EN
3. Touch to enable slow motion feature. The icon turns orange.
4. Touch to play the video.
5. During playback:
•
Touch to adjust the fast-forward speed 1/2X ~ 1/64X.
•
Touch to adjust the rewind speed 1/2X ~ 1/64X.
6. Touch the orange to disable slow motion.
Note:
1. If video playback is already in progress, touch to enable slow motion.
2. The recorded sound will not be heard when a slow motion movie is played back.
Page 34
ProjectorCam
3.3.2 Capturing a still image in video playback
This function allows an image to be captured from the video being played.
EN
1. In Video mode, touch to enter Video Playback mode.
2. Touch the video to view it in full screen.
3. Touch to pause playback.
4. Press the Record button to capture the image. The file will be saved automatically.
Video
FHD
HD 60
HD 30
Photo
1920 x 1080
1280 x 720
1280 x 720
Note:
The definition of the image captured from the video depends on the definition setting of the camera when the video was recorded.
Page 35
ProjectorCam
3.4 Video playback settings
3.4.1 Protect File
1. In Video mode, touch to enter Video Playback mode.
2. Select the desired video file that you want to protect.
3. Touch to enter the Video
Playback ( ) menu.
4. Touch Protect File to enter the menu.
EN
5. Touch an option to select the desired setting.
•
Protect One: Protect the current file.
•
Unprotect One: Unprotect the current file.
•
Protect All: Protect all files.
•
Unprotect All: Unprotect all files.
Page 36
ProjectorCam
3.4.2 Play Option
1. In Video mode, touch to enter Video Playback mode.
2. Touch the selected video file to view it in full screen.
3. Touch to enter the Video
Playback ( ) menu.
4. Touch Play Option to enter the menu.
EN
5. Touch an option to select the desired setting.
•
Play One: Playback on the current video.
•
Play All: Playback all videos.
•
Repeat One: Replay the current video.
•
Repeat All: Replay all videos.
Page 37
ProjectorCam
3.4.3 Delete File
EN
1. In Video mode, touch to enter Video Playback mode.
2. Select the desired video file that you want to delete.
3. Touch to enter Video Playback ( ) menu.
4. Touch Delete File to enter the menu.
5. Touch an option to select the desired setting.
•
Delete this file: Delete the current file.
•
Delete all files: Delete all files.
•
Delete Selection: Delete the selected files.
Touch the desired files to mark them. When the file selection is complete, touch .
Page 38
ProjectorCam
6. Touch to confirm delete.
EN
Note:
Deleted files cannot be recovered. Ensure the files have backup before deletion. Protected files cannot be deleted, unlock the file first.
Page 39
ProjectorCam
3.5 Shooting photos
EN
1. Turn on the digital video camera. By default, the device is set to
Video mode.
2. Touch to switch to Camera mode.
3. Press the Record button to capture a photo.
3.5.1 The shooting screen
6 7 8
1
2
1
2
3
4
5
No.
Icon Item
Description
Camera mode
Indicates the digital video camera is currently in Camera mode.
Touch to switch to Video mode.
Card type
Indicates the memory card type in use.
9
10
11
12
13
14
15
16
17
3 White balance Indicates the current white
Page 40
ProjectorCam
No.
Icon Item
4
5
6
7
8
9
Metering mode
Menu
Description
balance mode.
Indicates the current AE metering mode.
Touch to enter the Camera menu.
Photo size
AF setting
LED icon
Touch to select the desired photo size.
Available options: 16M / 12M /
8M / 5M / 3M.
Touch to select the desired AF setting.
Available options: Normal /
Macro / Lock
Touch to select the suitable lighting mode.
Available options: Off / On
Scene mode
Touch to select the desired scene mode.
Available options: Auto / Night /
Sports / Landscape / Portrait /
Sunset / Sand/Snow / Flower /
Firework / Backlight / Beauty
EN
10 Available shot
Indicates the number of available shots of the memory card.
11 Battery status
Indicates the remaining battery power.
Page 41
ProjectorCam
No.
Icon Item
12
Zoom indicator
13
14
15
16
Description
Indicates the zoom status.
ISO
Indicates the current AE ISO mode.
Capture mode
Indicates the Capture Mode is set to Continue Shot.
Self-timer
Indicates the Self Timer mode is set to 10 seconds.
EV compensation
Indicates the current EV compensation.
Touch / to adjust the EV value.
EN
17 Playback Touch to enter Playback mode.
Page 42
ProjectorCam
3.6 Camera menu
EN
The Camera menu is used to adjust the capture settings in Camera mode.
1. Turn on the digital video camera. By default, the device is set to
Video mode.
2. Touch to switch to Camera mode.
3. Touch to enter the Camera menu.
4. Touch the desired menu option to enter the menu.
5. Touch an option to select the desired setting.
6. Touch to exit the menu.
Note:
Touch / to scroll through the available menu options. Touch / to go to the previous/next page.
3.6.1 Capture Mode
Set the recording method to use when shooting photos.
1. In Camera mode, touch to enter the Camera menu.
2. Touch Capture Mode to enter the menu.
3. Touch an option to select the desired setting.
Page 43
ProjectorCam
•
Normal: Shoot one photo at a time.
•
Continue Shot: Continuously shoot photos as long as you keep pressing the Record button.
EN
Note:
1. If Capture Mode is set to Continue Shot, Instant View and Self Timer will be disabled.
2. The Continue Shot function will be disabled if the Photo size is set to 16M / 12M / 8M.
3.6.2 Instant View
Display a preview of the recorded photo right after the shot is taken.
1. In Camera mode, touch to enter the Camera menu.
2. Touch Instant View to enter the menu.
3. Touch the option to select On or Off.
3.6.3 Self Timer
Set pre-defined time delay for self timer photography.
1. In Camera mode, touch to enter the Camera menu.
Page 44
ProjectorCam
2. Touch Self Timer to enter the menu.
3. Touch an option to select the desired setting.
•
Off: Disable this feature.
•
2 sec: 2-second delay self timer.
•
10 sec: 10-second delay self timer.
3.6.4 White Balance
Set the white balance when shooting photos under specific lighting conditions.
1. In Camera mode, touch to enter the Camera menu.
2. Touch White Balance to enter the menu.
3. Touch an option to select the desired setting.
•
Auto: Set the white balance automatically.
•
Incandescent: Indoor under tungsten lighting condition.
•
Sunny: Bright daylight shooting.
•
Cloudy: Cloudy day or shady condition.
•
Fluorescent: Indoor under fluorescent lighting.
•
Preset: Manually adjust the white balance.
EN
Page 45
ProjectorCam
3.6.5 AE Meter
Select the metering method for calculating the exposure.
1. In Camera mode, touch to enter the Camera menu.
2. Touch AE meter to enter the menu.
EN
3. Touch an option to select the desired setting.
•
Average: Calculate exposure based on the entire image area.
•
Center: Calculate exposure based on the entire image area, but provides greater exposure to the center of a subject.
•
Spot: Calculate exposure based on the small portion of the screen center.
3.6.6 AE ISO
Set the sensitivity for shooting photos.
1. In Camera mode, touch to enter the Camera menu.
2. Touch AE ISO to enter the menu.
Page 46
ProjectorCam
3. Touch an option to select the desired setting:
Auto (100-400), Auto800
(100-800), Auto1600
(100-1600), 100, 200, 400,
800, 1600.
Note:
Use a higher ISO setting in dim conditions and a lower ISO setting in brighter conditions.
3.6.7 Digital Effect
Set the color filter effect to be applied on the photo you want to capture.
1. In Camera mode, touch to enter the Camera menu.
2. Touch Digital Effect to enter the menu.
3. Touch an option to select the desired setting.
•
Off: No digital effect is used.
•
Art: Add an oil painting color effect.
•
Sepia: Add brown color effect.
•
Negative: Add a negative color effect.
•
Black/White: Add a monochrome color effect.
•
Vivid: Add a bright color tone effect.
EN
Page 47
ProjectorCam
3.6.8 Digital Zoom
Set whether or not to use digital zoom when capturing photos.
1. In Camera mode, touch to enter the Camera menu.
2. Touch Digital Zoom to enter the menu.
EN
3. Touch the option to select On or Off.
Page 48
ProjectorCam
3.7 Viewing photos
1. Turn on the digital video camera. By default, the digital video camera is set to Video mode.
EN
2. Touch to switch to Camera mode.
3. Touch to enter Photo Playback mode.
4. Touch the photo to view it in full screen.
1
3
4 5
6
7
8
2
9
10
11
No.
Icon
1
2
3
Item
Playback mode
Menu
Description
Indicates the digital video camera is in Photo Playback mode.
Touch to enter the Photo Playback menu.
File number
Indicates the file number.
Page 49
ProjectorCam
No.
Icon Item
4
Photo size
5
Description
Indicates the file resolution.
Protect Indicates the file is protected.
6
7
DPOF tag
Indicated the file is marked for printing.
Battery status
Indicates the remaining battery power.
8
Previous Touch to view the previous photo.
EN
9
Next Touch to view the next photo.
10
11
T (zoom in)
Return
Touch to zoom in the photo up to
10X.
Touch to return to the previous screen.
Page 50
ProjectorCam
3.8 Photo playback settings
3.8.1 Protect File
1. In Camera mode, touch to enter Photo Playback mode.
2. Select the desired photo file that you want to protect.
3. Touch to enter the
Photo Playback ( ) menu.
4. Touch Protect File to enter the menu.
EN
5. Touch an option to select the desired setting.
•
Protect One: Protect the current file.
•
Unprotect One: Unprotect the current file.
•
Protect All: Protect all files.
•
Unprotect All: Unprotect all files.
Page 51
ProjectorCam
3.8.2 Slide Show
1. In Camera mode, touch to enter Playback mode.
2. Select the desired photo file that you want to start the slide show first.
3. Touch to enter the
Playback ( ) menu.
4. Touch Slide Show to enter the menu.
5. Touch the option to select On to enable the slide show.
The slide show starts right away.
6. Touch to stop.
EN
Page 52
ProjectorCam
3.8.3 Delete File
1. In Camera mode, touch to enter Photo Playback mode.
2. Select the desired photo file that you want to delete.
3. Touch to enter Photo
Playback ( ) menu.
4. Touch Delete File to enter the menu.
EN
5. Touch an option to select the desired setting.
•
Delete this file: Delete the current file.
•
Delete all files: Delete all files.
•
Delete Selection: Delete the selected files.
Touch the desired files to mark them. When the file selection is complete, touch .
Page 53
ProjectorCam
6. Touch to confirm delete.
EN
Note:
Deleted files cannot be recovered. Ensure the files have backup before deletion. Protected files cannot be deleted, unlock the file first.
Page 54
ProjectorCam
3.8.4 DPOF
Note:
A memory card is required for DPOF function.
EN
1. In Camera mode, touch to enter Photo Playback mode.
2. Select the desired photo file that you want to set the DPOF tag.
3. Touch to enter the Photo
Playback ( ) menu.
4. Touch DPOF to enter the menu.
5. Touch an option to select the desired setting.
•
DPOF One: Set the number of print on the current file.
•
DPOF All: Set the number of print on all files.
•
Reset One: Remove the DPOF tag on the current file.
•
Reset All: Remove the DPOF tag on all files.
6. Touch / to select the desired file.
7. Touch / to set the number of print.
8. Repeat step 6~7 to tag other file.
9. Touch to confirm the DPOF setting.
Page 55
ProjectorCam
3.8.5 Rotate
1. In Camera mode, touch to enter Photo Playback mode.
2. Select the desired photo file that you want to rotate.
3. Touch to enter the
Photo Playback ( ) menu.
4. Touch Rotate to enter the menu.
EN
5. Touch an option to select the desired setting.
•
Left 90: Rotate the image
90° counter-clockwise.
•
Right 90: Rotate the image 90° clockwise.
Page 56
ProjectorCam
3.9 Using the built-in projector
Activate the projector function to project videos or photos.
3.9.1 Activate the projector function
1. In Video/Camera mode, touch to enter Video Playback
/Photo Playback mode.
2. Touch the video to view it in full screen.
EN
3. Touch to activate the Projector function.
4. The Zoom Lever / can be used for Volume Control when video is being played back.
Page 57
ProjectorCam
3.9.2 Projector buttons operation
See the table below for a description of each button’s function.
1
2
5
3
4
No. Icon Item
1
2
3
4
Previous
Play
Projector
Return
EN
Description
Touch to view the previous video/photo.
Video Playback mode: Play/Stop
Photo Playback mode: Slide
Function On/Off
Touch this button to activate the
Projector function
Touch this button to stop Projector function
5 Next Touch to view the next video/photo.
Note:
1. The LCD will go black when the PROJECTOR function is activated. This is normal and not a fault.
2. When using the PROJECTOR function, Slow Video Playback cannot be used.
3. Before switching off the machine, make sure the projector function is switched off.
Otherwise damage of the machine may occur.
Page 58
ProjectorCam
4 Using Setup menu
EN
4.1 Setup menu
Configure the digital video camera general settings.
1. Turn on the digital video camera. By default, the device is set to
Video mode. In Camera mode, touch to switch to Video mode.
2. Touch to enter the OSD menu and switch to Setup ( ) menu.
•
In Video mode, touch menu.
•
In Camera mode, touch menu.
twice to switch to Setup (
to switch to Setup ( )
)
3. Touch the desired menu option to enter the menu.
4. Touch an option to select the desired setting.
5. Touch to exit the menu.
Note:
Touch / to scroll through the available menu options. Touch / to go to the previous/next page.
Page 59
ProjectorCam
4.1.1 System
Set the TV type based on your local region.
1. Switch to Setup ( ) menu.
2. Touch System to enter the menu.
3. Touch the option to select
NTSC or PAL.
4.1.2 File Number
Set the file numbering type for recorded files.
1. Switch to Setup ( ) menu.
2. Touch File Number to enter the menu.
3. Touch an option to select the desired setting.
•
Reset: Reset the file number to 0001.
•
Serial: Continue the file numbering from the last recorded file.
EN
Page 60
ProjectorCam
4.1.3 Time Setup
Set the date and time settings.
1. Switch to Setup ( ) menu.
2. Touch Time Setup to enter the menu.
3. To adjust the field item, touch the respective field to select the field.
4. Touch / to adjust the value.
5. Repeat step 3~4 to adjust other fields.
6. Touch to save your changes.
EN
Note:
Touch / to adjust the value. Touch / to go to the previous/next field.
4.1.4 Format
Format the memory card.
1. Switch to Setup ( ) menu.
2. Touch Format to enter the menu.
3. Touch to format the card.
Page 61
ProjectorCam
4. When the “Format successful!” message appears, touch to exit the menu.
4.1.5 Default Setting
Reset the digital video camera settings to its factory defaults.
1. Switch to Setup ( ) menu.
2. Touch Default Setting to enter the menu.
3. Touch to reset.
4. When the “Operation done!” message appears, touch to exit the menu.
EN
Page 62
ProjectorCam
4.1.6 LCD Brightness
Set the LCD display brightness.
1. Switch to Setup ( ) menu.
2. Touch LCD Brightness to enter the menu.
EN
3. Touch an option to select the desired setting.
•
Normal: Maintain the brightness level as the default setting.
•
High: Increase the brightness level.
•
Auto: Automatically adjust the brightness level based on the surrounding environment.
4.1.7 Date/Time Stamp
Disable the date/time stamp or select the date/time stamp type when shooting a photo.
1. Switch to Setup ( ) menu.
2. Touch Date/Time stamp to enter the menu.
3. Touch an option to select the desired setting.
Page 63
ProjectorCam
•
Off: Disable the date/time stamp.
•
Date: Enable the date stamp only.
•
Date/Time: Enable date and time stamp.
4.1.8 Auto Power Off
EN
Set the digital video camera to automatically turn off if it is left idle for a preset time.
1. Switch to Setup ( ) menu.
2. Touch Auto power off to enter the menu.
3. Touch an option to select the desired setting.
•
Off: Disable the Auto
Power Off function.
•
3 min: Automatically turn off the power if the digital video camera is left idle for
3 minutes.
•
5 min: Automatically turn off the power if the digital video camera is left idle for 5 minutes.
Page 64
ProjectorCam
4.1.9 Language
Set the on-screen display language.
1. Switch to Setup ( ) menu.
2. Touch Language to enter the menu.
EN
3. Touch the language option to select the desired language.
Note:
Touch / to scroll through the available menu options. Touch / to go to the previous/next page.
4.1.10 Information
Select the information type to be displayed on the preview screen.
1. Switch to Setup ( ) menu.
2. Touch Information to enter the menu.
Page 65
ProjectorCam
3. Touch an option to select the desired setting.
•
Normal: Display basic information on the preview screen.
•
Advance: Display detail information on the preview screen.
4.1.11 Beep Sound
Enable/Disable the beep sound.
1. Switch to Setup ( ) menu.
2. Touch Beep Sound to enter the menu.
3. Touch the option to select On or Off.
EN
Page 66
ProjectorCam EN
4.1.12 Start Logo
Set the start up image to be displayed on the screen when the digital video camera is turned on.
1. Switch to Setup ( ) menu.
2. Touch Start Logo to enter the menu.
3. Touch an option to select the desired setting.
•
Default: Use the default start-up logo.
•
User Setting: Use one of the captured photos as the start-up logo.
4.1.13 Anti-flicker
Set the refresh rate of the digital video camera.
1. Switch to Setup ( ) menu.
2. Touch Anti-flicker to enter the menu.
Page 67
ProjectorCam
3. Touch an option to select the desired setting.
EN
•
Auto: Automatically adjust the frequency system based on the System setting.
•
60Hz: Set the frequency system to 60Hz.
•
50Hz: Set the frequency system to 50Hz.
4.1.14 Recording Audio Gain
If the automatic volume gain function is enabled and the recording volume is increased, subtle sounds and dialogue are recorded as clearly as possible. However, when recording with the automatic volume gain function, a larger surrounding sound will be added to the recording; this is a normal situation and is not of poor quality. At normal environment, it will automatically disable the automatic volume gain function.
1. Switch to Setup ( ) menu.
2. Touch Recording Audio
Gain to enter the menu.
3. Touch the option to select On or Off.
Page 68
ProjectorCam
4.1.15 SD
Select the memory card type to be used as the default storage.
EN
1. Switch to Setup ( ) menu.
2. Touch SD to enter the menu.
3. Touch the option to select
micro SD or SD.
4.1.16 Auto Hide Info
Select whether or not to automatically hide the information icons shown on the screen.
1. Switch to Setup ( ) menu.
2. Touch Auto Hide Info to enter the menu.
3. Touch the option to select On or Off.
Page 69
ProjectorCam
5 Connecting to other devices
5.1 Connecting to the computer
You can connect the device to a PC or notebook to transfer or view files as well as charge the device.
1. Turn on the digital video camera.
2. Open the USB/HDMI connector cover.
3. Connect one end of the
USB cable to the device.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. After the connection is established, a “Removable Disk” icon appears in “My
Computer”. Click this icon to access the files in your device.
6. Copy the desired files to a folder on your computer.
EN
Page 70
ProjectorCam
5.2 Connecting to TV
You can play files in your digital video camera on a TV using an
HDMI cable.
1. Turn on the digital video camera.
2. Open the USB/HDMI connector cover.
3. Connect one end of the
HDMI cable to the digital video camera.
4. Connect the other end of the HDMI cable to an HDMI
TV.
5. Turn on the TV, and then switch the input source of the TV to
“HDMI”.
6. Follow the on-screen instructions to operate the device via the
TV.
EN
Note:
1. The synchronized output depends on the current digital video camera mode (Video or
Camera). These two modes cannot be switched.
2. In HDMI mode, you cannot use the digital video camera to record videos, capture photos, utilize the digital zoom function, or playback videos in slow motion.
3. Be sure to turn the digital video camera on before connecting to a TV using an HDMI cable.
4. For HDMI/AV output, the definition may be set as FHD or HD 30.
Page 71
ProjectorCam
6 Installing the Software
1.
2.
Insert the supplied CD-ROM in a CD-ROM drive.
An Autorun screen will be displayed.
EN
3.
If the Autorun screen is not displayed, go to My Computer
> CD-ROM and double-click Install_CD.exe.
Click the respective software name. Follow the on-screen instructions to complete the software installation.
Page 72
ProjectorCam
7 Editing software
EN
ArcSoft Total Media Extreme (TME) ™ manages your media for you, and gives you tons of fun and exciting ways to create and share projects featuring your photo, video, and music files. Edit, enhance and add creative effects to your photos. You can
•
Create your own movies or photo slide shows complete with soundtrack.
•
Upload your files easily to YouTube™!
•
Or share them through simple email attachments or popular photo printing.
•
You can go to http://www.arcsoft.com/ for more information.
Page 73
ProjectorCam
8 Specifications
EN
Specifications
Image sensor 1/3.2” CMOS sensor
Effective pixels 5.0 Megapixels (2592 x 1944)
Storage media
Supports (Micro) SDHC, up to 32GB class 4 or above
Lens
10X Optical zoom lens
F2.8-F3.5, f=4.6mm-46mm (35-350mm, 35mm equivalent)
Focus range
Movie Clip
Movie
Wide: 10 cm~Infinity
Tele: 90 cm~Infinity
Normal
Wide: 70 cm~Infinity
Still image
Tele: 200 cm~Infinity
Macro (Flower)
Wide: 10 cm~70 cm
Tele: 90 cm~200 cm
Resolution: Full HD (1920 x 1080), 30fps
HD (1280 x 720), 30fps and 60fps
Format: MOV
Playback Function: Play/Pause, Forward,
Rewind;
Slow Motion On: 1/2X ~ 1/64X
Page 74
ProjectorCam
Specifications
Slow Motion Off: 2X ~ 64X
Still image
Resolution:16M (4608x3456, by interpolation),
12M (4000x3000, by interpolation),
8M (3200x2400, by interpolation),
5M (2592x1944),
3M (2048x1536)
Format: DCF 1.1 (JPEG, Exif2.2)
Playback: 10x digital zoom
TFT screen 3.0” Touch Panel screen (16:9)
Assist Lamp White LED: effective distance 1 m
Shutter
Electronic shutter
Auto:1/2 ~1/2000 sec, Night: 2~1/2000 sec.
Exposure Average, Center, Spot
Movie Auto
ISO
Still image
Auto (100-400), Auto800 (100-800),
Auto1600 (100-1600), 100, 200,
400, 800, 1600
Interface
Mini B Type USB 2.0 (high-speed),
Mini C Type HDMI
Microphone
Yes
Speaker Yes
EN
Page 75
ProjectorCam
Specifications
Battery
1200 mAH CA NP-40 Lithium-ion rechargeable battery
Operating
Temperature
Operating
Humidity
0° ~ 40° C
20 ~ 70% RH
Dimensions 124 x 63.7 x 58.6 mm
Weight Approx. 308 g (without battery/memory card)
EN
Page 76
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement