advertisement
Basic Operation
Chapter 2
Radio
TV
CONNECTION 3
1 2
3 4
5 6
A
1 2
3 4
5
6
B
1 2 3
4 5
6
7
8
C
CONNECTION2
7
8
5
6
3
4
1
2
C N T O
7
8
5
6
3
4
1
2
7
8
5
6
3
4
1
2
7
8
5
3
6
4
1
2
GPS
CDC
Connection 2
1.
rear left negative terminal of the
speaker(green and black), used to connect to the negative terminal of the left speaker on the rear part of the vehicle.
2..
Rear left positive terminal of
speaker(green), used to connect to the positive terminal of the left speaker on the rear part of the vehicle.
3.Front left negative terminal of the
speaker(white and black), used to connect to the negative terminal of the left speaker on the front part of the vehicle.
4.Front left positive terminal of
speaker(white), used to connect to the positive terminal of the left
A
B
C
7
8
Two cha nn el vi de o out pu t
GND
Car telephone mute
Audio-r output
Audio-l output
Camera video input
GND
GND
Video input2
Video input1
Audio-r input
GND
Audio-l input1
Steering wheel +
Steering wheel -
Audio-r input2
GND
Audio-l input2
5.Front right negative terminal of
the speaker(gray and black), use to connect to the negative terminal of the right speaker on the front part of the vehicle.
6.Front right positive terminal of
the speaker(gray), use to connect to the
positive terminal of the right speaker on the front part of the vehicle.
7.Rear right negative terminal of
speaker(purple and black), used to connect to the negative terminal
Page
05
Chapter 2
Basic Operation
speaker on the rear part of the vehicle.
8.Rear right positive terminal of
speaker(purple) used to connect to the positive terminal of the right speaker on the rear part of the vehicle.
Connection 3
1please see the detailed diagram
Antenna socket, used to connect outside of the vehicle.
CDC connecting port, used to
CASYS
CDC (6~10 disks changer )
2.3 Schematic Drawing of Panel Functions
POWER
Volume +
Volume -
MUTE
Mode
EJECT PANEL
TFT monito r
Page
06
Receiving port of remote control signal
MENU
SELECT
Step backward
PLAY/PAUSE
Basic Operation
2.4 Product Appearance
On DVD mode
Press here to stretch or close the display angle
DISC PORT
Panel Spreading
Chapter 2
Note:
The Company is actively engaged in improving the product quality and offering update version of the product. The appearance, functions or design of the product may be a little different from those in the manual. And the actual product prevails. The Company will not give any notice for the changes. Please forgive for this.
Page
07
Chapter 3
Description of Main Functional Operations
3.1 Basic Operation
1. Switch on/off
Turn on the power supply with the car key, the power supply of the player will be automatically switched on and the system will return to the state when it was switched off. Press the power button to switch off the player if you don't want to use it.
2. Function modes switch
Press the SELECT button on the panel or remote controller, you can have the player circularly switched among the following modes: DVD,
AM, FM, CDC and TV. (Remark: CDC can only be played when the player is configured with CDC player.)
The player has to be restarted if it is powered off. The player will automatically recover the mode when it is powered off.
If you place a disc into the player, it will automatically switch to DVD mode no matter which mode it is in.
3. Volume Control
Press the "+/-" button on the panel or remote control when the player is
in normal play state, you can change
the volume to meet your requirement.
4. Mute Control
If you don't need the voice output in the normal play, press the mute button on the panel or the remote controller. The symbol of "Mute" will be display on the screen and the system will be in mute state. Press the button again, the system will exit the mute mode and recover voice output.
5. Display and Tuning of Time
Press the TIME button on the panel or the remotecontroller, the time display will be switched on or off.
Press the "TUNING" button
on the remote control, the time display willswitch circularly between
"hour-minute-second".Press the "+/-"
button, now you can change the value
of hour, minute and second respectively.
6. Supported Disc Types
DVD, DVCD, VCD, CD, CD-RW,
Mp3, etc.
7. Rotary panel
Press button on the panel or remote controller to rotate the panel or adjust the angles of the screen, and the original position can be restored.
(a) Press on the panel or the controller for remote before launching
, then the panel will be totally launched.
(b) After launching totally, a brief press of on the panel or the remote controller will make the panel draw back (6-7mm), another press will lead it draw back again.
(c) A long time press will draw it back completely.
Note:
a brief press: Means that the effection time on this key is equal to or less than 1 second (just once of the buzzer); a long press: Means that theeffection
Page
08
Description of Main Functional Operations
Chapter 3 time on this key is more than 1 second (twice of the buzzer). switched off. The whole system can be operated after that.
8. Eject disc
This machine has touch panel function. The main menu is shown as Drawing OSD0001, which has 5 functions: DVD, TV, Radio,
CDC,GPS,A/V/Bluetooth and Setting manually only.[different from the what you want, or press the
Up/Down button on the remote controller to cyclically choose the remote controller (rotary key
)] functions. Press the function button on the remote controller to confirm
Detailed steps were show as the current choice. The "+/ -" On the following: remote controller can increase or
(a)Pressing on the panel or the decrease the value of current state.
remote controller to make it launch
1. DVD Function completely;
Insert DVD, VCD discs etc, and
(b)Pressing near the exiting slot
Press DVD symbol on the screen, in the back of the panel, the disk will the player will start reading the disc and play the picture on full-screen.
3.2 Description of Touch
Panel Operation
When you press POW button on the panel or the remote controller, initial setting "Do not watch me when driving" will be displayed. Then it will return to the state when it was
Detailed DVD operation can refer to chapter 3.3. In the play state, by
Pressing either position of the screen or pressing the Menu button on the panel on the Function button on the remote controller, it will return to main menu which is shown as
OSD0001
Insert CD, Touch DVD symbol, it will lead you to the menu which is shown as OSD0002.
DVD
12:00
DVD T V
HOME
F/AM
Bluetooth
CDC SET GPS
EXT
OSD-0001
Page
09
SYS
HOME
OSD-0002
Chapter 3
Description of Main Functional Operations
(1) Play/Pause/Stop. Press the
Play/Pause/Stop button on the screen; the machine will execute relative operation. The current status will be shown on the left upper side of the screen.
(2) Song skipping: Press "Last song"/ "Next Song" to skip backward or forward.
(3) Main Menu: Press this button to return to main menu which is shown as OSD0001 (This function works the same in all state. No further explanation will be listed)
(4) Volume Adjustment: Press "+, -" button to adjust the volume (This function works the same in all state.
No further explanation will be listed.)
(5) Mute button: Press this button and "Muting" will be shown on the screen. The whole system will be in mute state. Press again; it will resume the Sound Output (This function works the same in all state.
No further explanation will be listed)
2. TV Function
Touch the TV symbol under main menu, TV will be shown on fullscreen as OSD0003. Detailed operation can refer to Chapter 3.6
Chanel 01
44.25Mhz
PAL 1
CH
0 1 7 2 5
.
2 3 0 M H Z
12:00
MUTE HOME
1
5
EXIT
SYS
HOME
Randomly Press either place of the picture under TV play state.
3. Radio Function
Press radio symbol under main menu to enter radio play menu, as is shown on Drawing OSD0004.
HOME
MUTE
12:00
M01
F
M
1 0 6
.
2 M H
Z
M02 M03 M04
M05 M06
15 chapter 3.5
(1).AM&FM. Switch between AM &
FM
(2).Search station, select station -, select station +, adjustment -, adjustment +, store station. Refer to
Chapter 3.5 for detailed functions
4.Bluetooth Function
Press symbol under main menu to enter bluetooth menu, as is shown on drawing OSD0005.
Before using the function,you must
Bluetooth operation diagram
OSD-0005
Pair it with your bluetooth mobile phoe.
5.CDC Function
Touch the CDC symbol under main menu to enter radio playing menu which is shown as OSD0006.
Detailed operation can refer to chapter 3.7
Page
10
CDC
12:00
1 5
HOME EXIT
HOME EXIT
1 5
HOME EXIT
HOME
EXIT
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement