W

E L L S

M

A N U F A C T U R I N G

I T E M N O .

F-586 BUILT-IN FRYER

F-586

Specifications

Overall Dimensions:

Width

Depth

Oil Capacity:

F-586

Temperature Range:

F-586

Inches

14 3/4

23 1/2

Lbs.

Pre-Heat Time to 350° F: 4 1/2 minutes

Watts Per Hour to Maintain 350° F:

Typical Production: Per Hour

MM

375

597

KG

15 7

Fahrenheit Celsius

275º to 375º 135º to 191º

450

French Fries (2 oz. servings)

Chicken (pounds)

Weights:

Installed

Shipping

300

20

Lbs.

39

45

KG

18

20

Accessories / Options

Basket, half-size (2 per fry pot), 20161

Basket, full size, 20162

Crumb Cradle, 20690

Fry Pot, replacement, 20169

Fry Pot Cover, 21010

Wells F-586 Built-in Fryer is one of the most durable and easy to use in the industry. The auto basket lift removes product when the set time has been reached, providing cooking consistency. A swing-up element allows the fry pot to be easily removed for cleaning, while the element’s low-watt density provides extended oil life.

Features

• The auto-lift fryer has an adjustable one to fifteen

minute push-button timer that automatically lifts the

fry basket from oil.

• Swing-up element, located below the basket, allows

easy removal of the fry pot for cleaning. Element is

heavy-duty stainless steel with low watt density for

longer oil life.

• Timer control is recessed in a one-piece, drawn,

remote stainless steel panel.

• Element control housing has a spring-loaded support

rod to secure element when in a raised position.

• A positive-off thermostat controls the element,

allowing for adjustable and more consistent

temperatures. A signal light indicates that the

heating element is energized.

• Deep-drawn, removable fry pot is made of

nickel-plated steel and can hold up to fifteen pounds

of oil.

• A manual reset safety thermostat will shut off the

heating element power and illuminate the signal light

if an over-temperature condition is reached.

• A terminal block is provided for field wiring

connection to the main power supply.

• An auxiliary terminal block allows connection to an

external flame sensor fire suppression system.

• One full size, rear-hanging fry basket is provided.

• Wellslok allows for quick and easy installation in

stainless steel countertops.

• The F-586 Fryer is Underwriters Laboratories, Inc.

recognized and meets NSF International standards.

• A one-year warranty against defects covers

parts and labor.

Export

The following model is available for export and meets the standards for CE:

• F-586EU, 380-415V, 3NAC, 5.75 KW

WELLS

W

E L L S

M

A N U F A C T U R I N G

R

R

E6070 STD.4

EXPORT

MODELS

ONLY

D I M E N S I O N S : INCH

(MM)

M O D E L

F - 5 8 6

B U I LT- I N F RY E R

SUGGESTED CLEARANCE REQUIRED FROM

UNIT TO THE NEAREST SURFACE

BACK

2 1/4

(57)

SIDE

3

(76)

BOTTOM

6

(152)

FRONT

3

(76)

23 1/2

(597)

17 1/8

(435)

14 3/4

(375)

2

(51)

6 1/4

(159)

8 7/16

(214)

13 3/16

(335)

14

(356)

F - 5 8 6 E L E CT R I C A L S P E C I F I C AT I O N S :

F-586 208 5750 NA NA NA

F-586 240 5750 NA NA NA

F-586EU 380-415 5750 9.0 8.0 8.0

NA

NA

1.0

AMPS POWER

SINGLE PHASE SUPPLY CORD

27.7

24.0

NA

NONE

NONE

NONE

Denotes export (EU) products.

NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.

This document is not for installation purposes. The installation of recognized component units requires additional evaluations to Underwriters Laboratories Inc. standards.

THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY

WELLS MANUFACTURING COMPANY

2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.

USA PHONE: (775) 689-5700 • FAX: (775) 689-5972

FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 www.wells-mfg.com

© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.

02/02 • REV(G) • PART NO. 37103