Citizen 26CL705 User manual

USER MANUAL
26CL705
26” LCD Television
ƒ
ƒ
Easy PC Connection
Customize your Picture and Sound
www.citizen-electronics.com
1
Table of Contents
Important Safety Instructions………………………………………
Packing List………………………………………………………….
Batteries for Remote Control………………………………………
Component Description…..………………………………………...
Remote Control...……………………………………………………
Installation……………………………………………………………
Menu Operation……………………………………………………..
(1) Picture Setting Menu………………………………………..
(2) Sound Setting Menu………………………………………...
(3) Channel Setting Menu………………………………………
(4) Timer Setting Menu………………………………………….
(5) Function Setting Menu………………………………………
Parental Controls……………………………………………………
Sleep Timer………………………………………………………….
Trouble Shooting…………………………………………………….
Warranty Information………………………………………………..
2
5
6
8
10
11
12
12
13
13
16
17
19
20
21
22
Note: All images in this manual are for example only. Actual product may
differ from these images.
PAGE 1
2
Important Safety Instructions
Electrical energy can perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered and
manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger,
please adhere to the following instructions when installing, operating and cleaning this product.
To ensure your safety and prolong the service life of your LCD TV product, please read the
following precautions carefully before using this product.
WARNING
To reduce the
risk of fire or
electric shock, do
not expose this
product to rain or
moisture.
Do not expose this
apparatus to
dripping, splashing,
or liquid filled
objects such as
vases. Doing so
may cause potential
damage.
CAUTION
RISK OF ELECTRIC
SHOCK.
DO NOT OPEN.
Caution: To reduce the risk of
electric shock, do not remove
cover (or back). No user
serviceable parts inside.
Refer servicing to qualified
service personnel.
This symbol indicates
"DANGEROUS VOLTAGE"
inside the product that
presents a risk of electric
shock or personal injury.
This symbol
indicates
important
instructions
accompanying
product.
Caution: To prevent electric shock, match wide blade of the power plug to
wide slot of the wall power outlet, and fully insert. Refer to the
identification/rating label located on the back panel of your product for its
proper operating voltage.
1ǃRead these instructions---All operating instructions must be read and understood before
the product is operated.
2ǃKeep these instructions---These safety and operating instructions must be kept in a safe
place for future reference.
3ǃ Heed all warnings--- All warnings on the product and in the instructions must be observed
closely.
4ǃ Follow all instructions---All operating instructions must be followed.
5ǃ Attachments---Only use attachments/accessories specified by the manufacturer. Do not
use attachments not recommended by the manufacturer. Use of improper attachments can
result in malfunction or injury.
6ǃ Grounding connection--This apparatus shall be connected to a MAINS socket with properly
grounded outlets.
7ǃ Power source---This products power consumption information is located on the rear Rating
Label. If you are not sure of the type of power supply to your home, consult your product
dealer or local power company. For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the cable connection.
8ǃ Power cable protection --- Protect the power cable from being walked on or pinched
particularly at the plugs, convenience receptacles, and the point where they exit from
the apparatus.
PAGE 2
3
9ǃ Power plug --- Refer to the identification/rating label located on the back panel of your
product for its proper operating voltage.
10ǃThe MAINS plug or appliance coupler of this apparatus is used as the disconnect device.
The disconnect device shall remain readily operable.
11ǃOverloading---Do not overload wall outlets, extension cables, or convenience receptacles
on other equipment as this can result in a risk of fire or electric shock.
12ǃEntering of objects and liquids---Never insert any objects or liquids into the ventilation
holes or openings on this television. High voltage flows through this television, and
doing so may cause electric shock and/or damage to the television.
13ǃ Damage requiring service--- Refer all servicing to a qualified service technician. Servicing
is required when the apparatus has been damaged in any way. Possible conditions of
damage are as follows:
a. When the power cable or plug is damaged.
b. When a liquid is spilled on the product or when objects have
fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the operating instructions.
Improper adjustment of controls not described in the instructions can cause damage,
which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in
performance. Any noticeable abnormality in the product indicates that the product
needs servicing.
Warning: This unit should only be serviced by an authorized and properly trained
technician.
Opening the cover or other attempts by the user to service this unit may result in serious
injury or death from electrical shock, and may increase the risk of fire.
14ǃ Replacement parts---In case the product needs replacement parts, make sure that the
service technician uses replacement parts specified by the manufacturer, or those with the
same characteristics and performance as the original parts. Use of unauthorized parts
can result in fire, electric shock and/or other danger.
15ǃ Safety checks---Upon completion of service or repair work, request the service
technician to perform safety checks to ensure that the product is in proper operating
condition.
16ǃ Wall mounting---To ensure proper safety when mounting this television, be sure to
install the product according to the method recommended by the manufacturer.
17ǃ Stand--- Do not place the product on an unstable trolley, stand,
tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal injuries
as well as damage to the product. When mounting the product
on a wall, be sure to follow the manufacturer’s instructions. Use
4
only the mounting hardware recommended by the manufacturer.
18ǃ Careful move--- Use only the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over. Sudden stops, excessive force and uneven
floor surfaces can cause the product to fall from the trolley.
PAGE 3
19. Lightning---Unplug this apparatus during lightning storms or when
unused for long periods of time.
For added protection for this television equipment during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line
surges.
20. Do not use this apparatus near water---for example, near a
bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.
Do not use immediately after moving from a low temperature to
high temperature environment, as this causes condensation,
which may result in fire, electric shock, or other hazards.
21. Do not place heavy foreign object, liquid containers, or open
flame sources (such as candles) on this television. Doing so
may cause electrical damage and or fire.
22. Clean only with a dry cloth---Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use only a dry cloth for cleaning.
23. Ventilation---Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions. The vents and
other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the
product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; Do not place the product in
an enclosed space such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
24. Heat sources---Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
25. Using video games or any external accessory with fixed images for 10
minutes can cause them to be permanently imprinted on the screen.
also, some network/program logos, phone numbers, teletext and images in 4:3 format
etc. may cause similar damage. This damage is not covered by your warranty.
26. Panel protection---The LCD panel used in this product is made
of glass. Therefore, it can break when the product is dropped or
impacted upon by other objects. Be careful not to be injured by broken
glass pieces in case the LCD panel breaks.
27. Pixel defect---The LCD panel is a very high technology product, giving
you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen
as a fixed point of blue, green or red. Please note that this does not affect the performance
of your product.
28. When the LCD TV reaches its end of life and needs to be disposed. Please contact
your local waste disposal facility to arrange proper disposal procedures.
PAGE 4
5
29. Working condition of the product: Temperature: 0ć~40ć
Storage condition of the product: Temperature: -20ć~50ć
Notes:
ķ Please note that the menus and illustrations in this manual may differ from those in your
actual television.
ĸ Upon initial setup, please make sure that all equipment is powered off.
PACKING LIST
LCD TV
Operat ion Manual
Inf rared Remote Cont rol
AC Power Cable
AAA Batt er ies
1
1
1
1
2
No te:
Please keep all packaging materials for future convenient use when transporting this item.
PAGE 5
6
BATTERIES FOR REMOTE CONTROL
If the remote control fails to operate the LCD TV functions, replace the batteries in the
remote control.
1. Push down to open the battery
cover.
2. Insert two AAA-size batteries.
3. Close up the cover until the
lock clicks.
Ɣ Place the batteries with their
terminals corresponding to the (+)
and (-) indications in the battery
compartment.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion.
Be sure to follow the instructions below.
ƽ Place the batteries with their terminals corresponding to the (+) and (-) indications in the
battery compartment.
ƽ Different types of batteries have different characteristics. Do not mix batteries of different
types.
ƽ Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
ƽ Remove batteries as soon as they are non-operable. Chemicals that leak from batteries
can cause a rash. If chemical leakage is found, wipe with a damp cloth.
ƽ The batteries supplied with the product may have a shorter life expectancy due to storage
conditions.
If the remote control is not used for an extended period of time, remove the batteries from the
remote control.
GENERAL INFORMATION
„ Radio Frequency input; support CATV
Can store up to 181 TV channels
„ AV input
Used to connect a DVD Player, VCR, or Video Camera.
„ Y/C component signal input (same as S-VIDEO input)
Convenient for hooking up a DVD Player to receive better picture quality.
PAGE 6
7
„ YPBPR input
Capable of receiving high definition YPBPR signal in 480i, 480P, 576i, 576P, 720P,
1080i formats.
„ MTS Stereo Decoding Function
Enjoy stereo, bilingual and mono programs.
„ VGA input
a. This television can be used as a monitor by connecting it to a computer.
b. By connecting the 3.5mm audio cord from your computer into this television, you
will be able to listen to audio from your computer on this television.
„ HDMI Input
Enjoy rich High Definition images straight from a High Definition source.
„ Blue background without signal
When no signal is detected in the TV, AV, S-VIDEO, and YPBPR modes, a soft blue
background is displayed. This is not a malfunction. Please ensure that all the appropriate
cables are connected.
„ Multi Language On-Screen Display menu
Ordinary and graphical user interface makes the menu operation user-friendly
„Energy Saving Mode (Power management mode)
When used as a PC display terminal without a PC signal input, the LCD TV will automatically
power off within 5 minutes and enter into the Power Energy Saving Mode. It will
automatically work again when it receives a signal from the PC. In addition, you can press
Ǐ ǐon the remote control.
„ Plug and Play
There is no need to equip any installation software when the product is used as a
computer monitor.
„ Adjusts the picture’s quality automatically
„ No flicker, no radiation, greenness and health
„ Auto on as time is set
„ Zoom mode
„ Legerity, convenient, low power consumption
„ MACROVISION auto identification function
„ CCD Function
PAGE 7
8
Component Description
LCD TV - Front Panel
Panel Buttons
Description
Number
Name
ķ
ǔMENUǕ
ĸ
ǔTV/AVǕ
Ĺ
ǔVOL+Ǖ
ĺ
ǔVOL-Ǖ
Ļ
ǔCH+Ǖ
ļ
ǔCH-Ǖ
Ľ
ǔ Ǖ
Ł
Infrared Receiver
Window
To receive the signal from the remote control.
ł
Power Indicator
Red indicator lighting, this means the TV is in standby mode;
Blue indicator lighting, this means the TV is in normal working
condition
To enter or quit from the OSD (On Screen Display) menu.
The same function asǏMENUǐon the remote control
To switch among the signal source TV, AV1, AV2,S-VIDEO,
YPBPR1,YPBPR2, PC and HDMI
To increase the sound volume. Adjust functions in menu
operation.
The same function asǏǐon the remote control
To decrease the sound volume. Adjust functions in menu
operation.
The same function asǏǐon the remote control
1. In TV mode, increase the channel number
2.To select functions in menu operation.
The same function asǏǐon the remote control
1. In TV mode, decrease the channel number
2. To select functions in menu operation.
The same function asǏǐon the remote control
To turn the LCD TV to STANDBY mode or press again to exit
STANDBY mode.
The same function asǏ
ǐon the remote control .
Notice: In this manual, the icon with “ Ǐ ǐ” means the button on the
remote controlˈthe icon with “ ǔ Ǖ” means the button on the LCD TV.
PAGE 8
9
2. LCD TV - Rear Panel
ķ
Terminal Description
Number
ķ
Name
HDMI
ĸ
PC
Ĺ
PC AUDIO
ĺ
YPbPr
Ļ
ļ
Ľ
AUDIO IN
VIDEO IN
S-VIDEO
ľ
TV Signal input
ĸ
Ĺ
ĺ
Ļ
ļ
Ľ
ľ
Description
HDMI (High Definition Multimedia Interface) connection.
This television can be used as a computer monitor by connecting it
to a PC using a VGA cable.
Port for PC audio connection
used to connect the video signal from a DVD player, video game
console, and various other devices for good picture quality.
audio signal input terminal
video signal input terminal
used to connect the video signal from a DVD player, video game
console and other devices.
RF input for a television cable/satellite connection.
PAGE 9
10
Remote Control
PAGE 10
11
RECALL : Return to last viewed program
AV/TV: Toggle between different signal sources available
P.MODE : Select different modes of picture settings
S.MODE : Select different modes of sound settings
MENU : To go to the On Screen Display (OSD) menus
Ǐǐ˖Channel Up/Up
Ǐǐ: Channel Down/Down
Ǐǐ: Volume Down/Left
Ǐǐ: Volume Up/Right
CH+ : Scroll to next channel
CH- : Scroll to previous channel
VOL- :Decrease audio volume
VOL+ : Increase audio volume
OK : Select or confirm menu item
DISPLAY : Show info of current program
CCD : Press to display the closed caption
ZOOM : Adjust displayable aspect ratio
POWER ON/OFF : Power the television on/off
0-9 Channel Keys : Key in the alphanumeric digits to switch to the designated channel directly
SLEEP : Select time of TV to sleep mode
MUTE : Mute sound
MTS : Switch between Mono/Stereo/SAP.
Installation
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated
location.
2. Connect the output terminal of the RF cable to the corresponding TV RF signal input terminal.
For best results use a high quality coax cable.
3. Connect the output terminal of the AV devices such as YPBPR, DVD to the corresponding
terminal on the LCD TV.
4. Connect one end of the PC terminal to the corresponding signal source terminal, and
connect the other end to the corresponding LCD TV terminal. Screw down the screws on
both sides to secure it.
Caution: When connecting, plug directly and lightly to the interface, otherwise you may
damage the pins.
5. Ensure that every AV signal cable is correctly connected to the corresponding interface.
6. Connect one end of the power cable to the power input jack of the LCD TV, then plug the
other end to the corresponding jack.
PAGE 11
12
Menu Operation
1. Use the On Screen Display menu to set and adjust functions.
2. Use Ǐǐ/Ǐǐ to select the desired menu after pressingǏMENUǐ, then press Ǐǐ
to enter the corresponding menu option.
3. Use Ǐǐ/Ǐǐto adjust the options value and return to the previous menu by pressing
ǏMENUǐagain.
4. Some functions may not be available in some modes.
Operating in TV, AV1, AV2, S-VIDEO, YPBPR 1, YPBPR 2, PC, and HDMI modes.
(1) Picture Setting Menu
Item
Function Description
Picture Mode
Normal, Soft, Vivid and User (four picture modes are provided)
Brightness
To adjust the picture’s brightness.
Contrast
To adjust the picture’s contrast.
Saturation
To adjust the picture’s saturation.
Sharpness
To adjust the picture’s sharpness.
Hue
To adjust the picture’s hue. (For NTSC signal only)
PAGE 12
13
(2) Sound Setting Menu
Item
Sound Mode
Volume
Bass
Treble
Balance
Function Description
Normal, Movie, News and User (four sound modes are provided)
To adjust the volume
To adjust the accompanying sound’s bass
To adjust the accompanying sound’s treble
To adjust the balance between the right and left track.
(3) Function Setting Menu
ƹLanguage
OSD language selection, the TV has English and other OSD languages.
ƹBlue Back
The on and off modes of blue Screen are as following:
On
Off
When there is no TV signal
Blue Screen
Pictures spotted with snowflake
When there is no other signals
Blue Screen˄Black Screen in PC Mode˅
Blue Screen˄Black Screen in PC Mode˅
PAGE 13
14
ƹTimer
PressǏǐto enter into the Timer sub menu. The display is as follows:
PressǏǐ/Ǐǐ to select different items, and press Ǐǐ/Ǐǐto adjust Current,
Off Time, On Time, and On Channel
Item
Current
Off Time
On Time
On Channel
Function Description
Set the current time by pressing Ǐ ǐ/Ǐ ǐto change the time
Parameter (hour:minute).
Set the time to turn off the TV by pressingǏǐ/Ǐǐto change the
time parameter (hour:minute).
Set the time to turn on the TV by pressingǏǐ/Ǐǐ to change the
time parameter (hour:minute).
Set the TV's power on channel by pressing Ǐǐ/Ǐǐ.
G
ƹCC
You can select Closed Caption, if available, to be displayed on screen.
ƹParent Guide
You may prevent children from watching programs not suitable for them, such as adult or
violent programs.
PressǏǐto enter the Parent Guide Menu. The default password is “0000”.
PAGE 14
ƹChange Password
In the Parent Control mode, pressǏǐto view the password submenu. Press the
number buttons on the remote control to enter the password. The default password is “0000”.
ĆAfter a password change has been made, please retain the new password for future
use. If you happen to lose your new password, the master password is "8888".
Press the number buttons on the remote control to set the new password. When the new
password has been inputted twice, the setting has finished successfully. The TV will go back
to previous menu.
ƹ V-CHIP (ON/OFF)
Note: the default V-CHIP setting is OFF. While V-CHIP is off, no programs are blocked from
viewing.
ƹ TV Rating
PressǏǐto enter into the TV Rating Menu. The display is as following:
PAGE 15
TV-Y: All children
TV-Y7: Directed to older children
TG-G: General Audience
TV-PG: Parental Guidance suggested
TV-14: Parents Strongly Cautioned
TV-MA: Mature Audience only
Fv: Fantasy Violence
D: Suggestive Dialogue
L: Strong Language
S: Adult situations
V: Violence
French Rating
For Canadian French Language Rating System, the following six ratings are available:
Exempt
G
: General programming, suitable for all audience
8 ANS +
: Children 8 years and older
13 ANS +
: Children 13 years and older
16 ANS +
: Children 16 years and older
18 ANS +
: Adult Programming
(4) Channel Setting Menu
Item
Auto Tune
Function Description
PressǏ>ǐto enter into the Auto Search menu. If theǏMENUǐbutton is
pressed during the search, the search will cancel and return to the
previous channel setting menu.
Fine Tune
Increase or decrease the frequency value.
Air/Cable
Set the TV channel table to Air, Cable, HRC or IRC
When one program is preset to On, you will find the program skipped
Skip
during programs switch by pressingǏCH+ǐorǏCH-ǐ
Note: this option is available in the TV menu only.
PAGE 16
17
(5) PC Setting Menu
Function Description
Item
H Position
To adjust the picture’s H Position
V Position
To adjust the picture’s V Position.
Clock
To adjust the picture’s sampling frequency
Phase
To adjust the picture’s sampling phase.
To automatically adjust the picture’s Horizontal Position and
Vertical Position
Auto Sync
Note: this menu is only available in PC mode.
(6) Advance Setting Menu
PAGE 17
18
Item
Scale
To adjust the displayable aspect ratio such as 16:9 or 4:3
3D NR
Color Temp.
Back Light
OSD Transparency
OSD
Function Description
Duration
High, medium, low and off
(four 3D NR modes are provided)
Normal, Warm, Cool and User (four colour temperature
modes are provided) Only when the Color Temp is set
as User mode, you can change the value of Red, Green or
Blue.
To adjust Back Light
To adjust menu transparency according to the different
background pictures.
To adjust the OSD display time
PressǏǐto enter into the PIP sub menu. The display is as following:
Item
Function Description
PIP MODE
To select PIP mode on or off
SUB Source
To select the signal input terminal of the sub-window
PIP SIZE
To adjust the size of the sub-window
PIP Position
To adjust the position of the sub-window
To select the sound input from the main-window or
sub-window
Sound Source
Note: PIP (Picture -In-Picture) is only available in the YPBPR1, YPBPR2, PC, and
HDMI modes.
z Sound Mode Selection
PressǏS.MODEǐto select between User, Normal, News and Movie modes. The last three
modes are default settings that cannot be adjusted. Entering the User mode allows settings
to be adjusted to the users preferences.
PAGE 18
19
Sound Mode
Sound Quality
User
For the user’s preference
Normal
For general programs
News
For general programs of conversations and news reports
Movie
For better audience effect as soft, magnificent and vivid
Note: The operation and setting of the Volume Control are applicable to all signal
sources.
zPicture Mode Selection
PressǏP.MODEǐto Switch among User, Soft, Normal and Vivid modes.
Picture Mode
Picture Quality
User
For the user’s preference
Normal
For general programs
Soft
For more mellow pictures
Vivid
For better visual effect such as magnificent and vivid
Note: This setting is available to all video signal sources.
zBacking Out Function
Press ǏRECALLǐ on the remote control, the TV will quickly go back to the previously
selected channel.
z MTS
ķ Capable of identifying MTS with the control status: the TV would memorize SAP after it
is identified: the TV would memorize Stereo after it is identified.
ĸ There is an OSD display to show the changes in broadcasting signals:
Ĺ Press ǏMTS/SAPǐto switch between MONO, STEREO and SAP.
zSignal Switch
Use Ǐǐ/Ǐǐto select the desired signal after pressingǏAV/TVǐon the remote control to
select between the signal sources: TV, AV1, AV2ˈS-VIDEO, YPBPR1, YPBPR2 PC and
HDMI. The order is displayed as below:
S-VIDEO
PAGE 19
20
z Sleep Function
PressǏSLEEPǐ on the remote control. The following picture will be displayed on the
screen:
Off
PressǏSLEEPǐ on the remote control repeatedly to change the time for turning off the TV. The
following will be displayed in cycle: Off, 15, 30, 45, 60, 90 and 120, if the current display is
“OFF”, this means there is no timing operation for turning off the TV. Any other value displayed
(e.g. 15) means that after 15 minutes from the current time, the system will automatically
turn off.
After starting the Sleep timing function, press ǏSLEEPǐ on the remote control. The time
remaining will be displayed. If pressed again, the timing can be reset among Off, 15, 30, 45,
60, 90 and 120.
z Information Display Function
In TV mode (except while in searching mode), if there is any menu displayed on the screen, the
current characters will be displayed if pressing ǏDISPLAYǐ on the remote control. Some
information related to programs will be displayed in the upper right hand position on the screen.
z Indicator Light
Status
Light Color
Description
On
Blue
The TV works normally
Off
Off
The TV is off
Standby
Red
In Standby Mode
PAGE 20
21
TROUBLESHOOTING
Before calling a technician, please check the following table to see if the below mentioned
symptoms can be diagnosed and fixed.
Symptoms
Possible Causes
Solution
No picture, no sound,
and no indicator light
on
No picture, no sound,
but the blue light
indicator is on.
1.The power cable is not
plugged in
2.The power is off
Functions of ON/OFF TIME
and SLEEP have been set
1.Plug the power cable in
2.Turn the power on
PressǏ
ǐto turn on the TV
1.TV is in PC Mode without
any PC signal input
2.The signal cable is not
connected properly
1.Contrast, sharpness, and
color are not set properly
2.Color settings are not set
properly
3.Sound settings are not set
properly
1.PressǏ
ǐor input the PC
signal
2.Connect the signal cable
properly
1.Adjust the value of contrast,
sharpness and color
2.Set the color system to the
country broadcasting standard
3.Set the sound system to the
country broadcasting standard
Picture is fuzzy or with
interference
Signal source is weak or RF
cable is faulty
Use a stronger signal or change
to a new RF cable
Blue background
No Video signal or the signal
cable is not properly
connected
Connect the signal cable properly
No picture, no sound,
but the blue light
indicator is on.
Picture and sound with
abnormality
Picture is unclear,
crawls or has black
stripes on horizontal
position in PC mode
Picture is not well adjusted
PC Picture is not in the
middle of the screen
Picture is not well adjusted
HDMI source with
snowy picture
The signal source is off or
corrupt
No sound
No Audio signal or the signal
cable is not properly
connected
The remote control
does not work
Batteries are not correctly
installed or are drained
Adjust automatically by selecting
Auto Adjust or Alternatively Adjust
the Clock and Phase manually
via the PC Settings menu
Adjust pictures automatically by
resetting the H Position, V
PositionPhase and Clock
Plug in the HDMI cable again
1.Connect the audio signal cable
correctly
2.Set the sound system correctly
1.Make sure the positive and the
negative polarities are correct
2.Reattach the battery lid
3.Replace with new batteries
Note: All features and specifications are subject to change without notice. The manufacturer
is not held responsible to any changes or improvements not mentioned in this manual.
PAGE 21
CITIZEN® WARRANTY
Consumer Electronics Products and Home Appliances
®
Thank you for choosing CITIZEN !
SYNNEX Canada Limited gives the following express warranty to the original consumer purchaser or gift recipient for this CITIZEN
product, when shipped in its original container and sold or distributed in Canada by SYNNEX Canada Limited or by an Authorized
CITIZEN Dealer:
SYNNEX Canada Limited warrants that this product is free, under normal use and maintenance, from any defects in material and
workmanship. If any such defects should be found in this product within the applicable warranty period, SYNNEX Canada Limited shall,
at its option, repair or replace the product as specified herein. Replacement parts furnished in connection with this warranty shall be
warranted for a period equal to the unexpired portion of the original equipment warranty.
This warranty shall not apply to:
a. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or
inappropriate use as outlined in the owner’s manual.
b. Any CITIZEN product tampered with, modified, adjusted or repaired by any party other than SYNNEX Canada Limited or
CITIZEN’s Authorized Service Centres.
c. Damage caused or repairs required as a result of the use with items not specified or approved by SYNNEX Canada Limited,
including but not limited to head cleaning tapes and chemical cleaning agents.
d. Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product
including but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, cables,
paper, cabinet, cabinet parts, knobs, buttons, baskets, stands, shelves, cookware and cooking utensils.
e. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
f. Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage
or liquid spillage.
g. Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus markings.
h. Any products used for rental or commercial purposes.
i. Any installation, setup and/or programming charges.
Should this CITIZEN product fail to operate during the warranty period, warranty service may be obtained upon delivery of the CITIZEN
product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized CITIZEN Service Centre.
In-home warranty service may be provided at SYNNEX Canada Limited’s discretion on any CITIZEN television with the screen size of
27” or larger. This warranty constitutes the entire express warranty granted by SYNNEX Canada Limited and no other dealer, service
centre or their agent or employee is authorized to extend, enlarge or transfer this warranty on behalf of SYNNEX Canada Limited. To
the extent the law permits, SYNNEX Canada Limited disclaims any and all liability for direct or indirect damages or losses or for any
incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product,
including damages for the loss of time or use of this CITIZEN product or the loss of information. The purchaser will be responsible for
any removal, reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and period of time
described herein, constitute complete fulfillment of all obligations and responsibilities of SYNNEX Canada Limited to the purchaser with
respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or
otherwise.
CARRY-IN PARTS & LABOUR WARRANTY PERIODS:
x
Audio Products: 1 Year (Remote Control, if applicable – 90 Days)
x
DVD Products: 1 Year (Remote Control – 90 Days)
x
LCD & Plasma Display TV: 1 Year (Remote Control – 90 Days)
x
Television Products: 1 Year (Remote Control – 90 Days)
x
VCR Products: 1 Year (Remote Control – 90 Days, Video Heads – 6 Months)
x
Home Appliances: 1 Year
o Microwave Magnetron parts only additional 3 Years
o Refrigerator / Freezer Compressor parts only, additional 4 years
To obtain the name and address of the nearest Authorized CITIZEN Service Centre or for more information on this warranty
visit www.citizen-electronics.com
mail your inquiry to SYNNEX Canada Limited
Citizen Customer Service
200 Ronson Drive
Toronto, ON M9W 5Z9; or
call toll free 1-800-663-5954, Monday to Friday 9:00am – 5:00pm Eastern Time.
Citizen is a registered trade-mark of SYNNEX Canada Limited
08.2007
PAGE 22