actical character sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges

This equipment has been tested and found to comply with the limits for a Class B provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by y frames, r, there is no guar ve we other Industries, Ltd.

This document contains copyrighted materials, trademarks and product names elated to this product

USP5120147

USP5069557

USP5009530

USP4983058

Patent numbers and patent publication numbers which are r

authority to operate the equipment.

oved by Brother Industries, Ltd.

ore starting and

, the

MODEL PT-11Q

USER’S GUIDE

could void the user’s

Changes or modifications not expressly appr

Consult the dealer or an experienced radio/TV technician for help.

eceiver.

ferent from that to which the Connect the equipment to an outlet on a circuit dif eceiving antenna.

Reorient or relocate the r interference by one or more of the following measures: aged to try to correct the e it an extremely pr inting. In the office

.

. These limits are designed to

. Ho

FCC NOTICE

ou read this manual carefully bef erence.

mance of the PT -11Q mak adio communications rt 15 of the FCC Rules , pursuant to Pa ual in a handy place for future ref

Although this machine is easy to use, we suggest that y

, the quality and perfor y about urgent tasks that require professional pr erent widths and exciting colors

to worr ou to print labels with diff

LA3288001

Printed in China

Increase the separation between the equipment and r receiver is connected.

-

-

-

-

turning the equipment off and on, the user is encour which are owned by Br

USP4976558

USP4927278

USP4839472 ve are as below: interference to r digital device machine.

y , the lab or the home le allows y

Y ou no longer ha availab factor keep the man

GENERAL PRECAUTIONS

• To avoid injures, do not touch the cutter’s edge.

• Use only Brother TZ tapes with this machine to avoid damage. Do not use tapes that do not have the mark.

• Tapes are available in three different widths: 1/4" (6 mm), 3/8" (9 mm) and 1/2" (12 mm).

• Do not pull the tape since this may damage the tape cassette.

• Do not attempt to cut the tape while printing or feeding since this will damage the tape.

• Do not clean the machine with alcohol or other organic solvents. Use only a soft, dry cloth.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the machine for an extended period of time.

Note: If power is disconnected for more than three minutes, all text shown in the display and any text files stored in the memory will be lost.

• Do not put any foreign objects into the machine.

• Do not put anything on top of the machine.

• Do not expose the machine to high temperatures or high humidity. Never leave it on the dashboard or in the back of your car.

• Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.

• Do not leave any rubber or vinyl on the machine for an extended period of time, which may cause staining of the machine.

• After inserting a new tape cassette, advance the tape by holding down and pressing once.

• Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g., a cotton swab) to avoid permanent damage.

• To prevent damage during shipment, a clear protective sheet is placed over the LCD panel. Remove this clear protective sheet before beginning use.

POWER SUPPLY

Changing the batteries

CAUTION

Batteries installed incorrectly can overheat and leak. This can result in chemical burns and machine overheating and damage.

Your machine requires 6 alkaline AAA batteries.

Carefully follow these instructions.

1 Press bumps on top of back cover and open.

2 Pull out tape cassette, if one was installed.

3 Remove batteries, if they were already installed.

4 Hold machine as pictured:

5 Insert six new batteries as follows:

Always:

• Insert “+” ends before “-” ends.

FIRST, in

LOWER layer insert ˝+˝ ends pointing DOWN.

• Remove “-” ends before “+” ends.

• Replace all 6 batteries at the same time with new ones.

-

6 Insert tape cassette.

7 Insert two hooks on bottom end of back cover into slots on bottom

+ of machine. Push down firmly on cover until it snaps into place.

8 Turn machine on.

SECOND, in

UPPER layer insert ˝+˝ ends pointing UP.

If no power, immediately remove batteries and call Brother Customer Service at:

1-877-478-6824

+

-

Optional AC adapter

The AC adapter allows you to use this machine wherever an electrical outlet is available.

Use Brother’s AD-30 adapter for your new PT-11Q.

1 Insert the plug on the adapter cord into the adapter jack on the bottom of the machine.

2 Insert the plug into the nearest standard electrical outlet.

OVERVIEW

11Q

Tape cutter lever

TAPE CASSETTES

This machine uses the Brother TZ tape, which is available in a variety of colors and three widths

(1/4" (6mm), 3/8" (9mm) and 1/2" (12mm)). A TZ tape is supplied with this machine.

1 Press in on the rough area at the top end of the machine and fold open the back cover. Should be the exact process as loading batteries.

2 If a tape cassette is already installed, remove it by pulling it straight up.

3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon. Also, make sure that the end of the tape feeds under the tape guides.

Note: If you are using a new tape cassette provided with a stopper, be sure to remove the stopper.

4 Insert the tape cassette firmly into the compartment, making sure that the entire back of the cassette contacts the bottom of the compartment.

Note: When inserting a tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide.

5 Securely close the back cover, making sure that it snaps into place.

6 Feed the tape by holding down and pressing and then push in the tape cutter lever to cut the tape.

once,

LETTERING STICK

The enclosed lettering stick enables you to easily remove the backing from laminated tapes.

1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand.

2 Pass the tape halfway through the long narrow hole in the stick.

3 Turn the stick three-quarters of a turn towards you and pull the stick away from you, as shown below.

4 Peel off the label backing.

GH

ABCDEF

ABCDEF

STARTING

Press . If batteries have been installed or the machine has been plugged in using the optional AC adapter, the previous session’s information is displayed when the machine is turned on. This feature allows you to stop work on a label and turn off the machine, then return to it later without having to re-enter the text.

The machine automatically turns off if no key is pressed within five minutes. The current session’s information is stored in the machine’s internal memory and displayed when the machine is later turned on again.

CODE KEY

By holding down and pressing a key with a function, character or accent written above it, you can use the corresponding function or add the corresponding character to your text.

CAPS KEY

By pressing to enter Caps mode, you can add upper-case letters to your text by simply pressing the character keys. When this mode is on, the Caps indicator in the topleft corner of the display comes on. To exit Caps mode, press indicator goes off.

until the Caps

Display

Backspace key

Return key

Function key

Caps key

Num key On/Off key

Back cover

Print head

NUM KEY

By pressing to enter Num mode, you can add numbers to your text by simply pressing the corresponding keys. When this mode is on, the Num indicator in the bottomleft corner of the display comes on. To exit Num mode, press until the Num indicator goes off.

DISPLAY

This machine’s LCD shows one row of 8 characters; however, the text that you enter can be up to 55 characters including spaces. The 8-character display is like a window which moves across the text.

1234567890123456789012345678901234567890123456789012345

Batteries y application. Select from the man ou can create labels for an w PT -11Q, y With your ne

INTRODUCTION

Tape cassette

Tape exit slot

CURSOR MOVEMENT

You can view and edit different parts of the text by moving the cursor backward and forward.

● To move the cursor one character at a time, press or .

● To move the cursor to the beginning of the text, hold down

and press .

● To move the cursor to the end of the text, hold down and press .

BACKSPACE KEY

This key can be used to remove characters from your text, clear all of the text or cancel the current function and return to the text input mode.

● To delete the character to the left of the cursor or to cancel a function, press .

● To clear all of the text that is currently entered, hold down and press .

SPACE KEY

As on a word processor, press to add a blank space to your text.

RETURN KEY

Press when you wish to accept or confirm a setting, or end the first line of text and start the second.

● To add a second line, press

once. The return mark ( ) appears in the text to indicate the end of the first line and the beginning of the second.

Note: Two lines of text can only be entered if 3/8" (9-mm)- or 1/2" (12-mm)-wide tape is installed.

● To accept or confirm a setting from a list, press

once.

ACCENTED CHARACTERS

You can also choose from a list of other accented characters that can be added to your text.

Letter

N

O

U

E

I

A

C

Ñ

Ó

Ù

È

Í

À

Ç

Ö

Ú

É

Ï

Á

Accented character

Ä Â Ã Æ

Ô

Ü

Ë

Î

Ê

Õ

Û

Letter n o u e i a c

ñ

ó

ù

è

í

à

ç

ö

ú

é

ï

á

Accented character

ä â ã æ

ô

ü

ë

î

ê

õ

û

1 Press if you want the accented character to be an uppercase letter.

Note: To quit the following procedure at any time without making any changes, press

2 Hold down and press . The message “A-U?” appears in the display.

3 Press the key for the letter in the accented character that you wish to add, and then press character.

4 Press

and until the cursor is positioned under the desired accented

to add the selected character to your text.

.

SYMBOLS

In addition to the letters, symbols, and numerals on and above the keys, there are 72 symbols available with the Symbol function. These symbols are divided into 9 groups, corresponding to the letters A through I.

Group

A

E

F

G

H

I

B

C

D

Ü

í

Õ

·

$

4

ü

ó

õ

°

¢

TM

Ç

ú

Ñ

;

[

®

ç

★

ñ

%

]

©

Symbols

Æ

Ã

¡

+

2

æ

ã

¿

×

3

á

§

÷

2

_

é

#

=

3

~

1 Press . The message “A-I?” appears in the display.

2 Press the key for the letter of the group containing the symbol that you wish to add, and then press

3 Press

and until the cursor is positioned under the desired symbol.

to add the symbol to the text.

SIZE

The characters in the text can be set to one of five different sizes in addition to AUTO, which automatically adjusts the characters to the largest possible size according to the width of the installed tape. The currently selected size setting is shown by the indicators at the top of the display. All of the size indicators light up when the AUTO setting is selected.

SIZE1 (A: standard size) SIZE2 (A: double width) SIZE3 ( A : double height)

SIZE4 (

A

: double width & double height) SIZE5 (

A

: 4

× width & double height)

Note:

• If there are two lines of text, they are printed with the SIZE1 setting applied, regardless of the selected size setting.

• To quit the following procedure at any time without making any changes, press

1 Press .

2 Press and until SIZE is displayed, and then press current size setting appears in the display.

3 Press

4 Press

and

(or

until the desired size setting is displayed.

) to apply the selected size setting to the text.

(or ). The

.

STYLE

You can also use one of nine different print styles for the characters in your label. If a setting other than NORMAL is selected, the Style indicator at the bottom of the display lights up.

NORMAL OUTLINE BOLD

SHADOW

I+BOLD (italic + bold)

ITALIC I+OUTL (italic + outline)

I+SHADOW (italic + shadow) VERTICAL

Note:

• If there are two lines of text, they are printed in the NORMAL style, regardless of the selected style setting.

• To quit the following procedure at any time without making any changes, press

1 Press .

.

(or ). The 2 Press and until STYLE is displayed, and then press current style setting appears in the display.

3 Press and until the desired style setting is displayed.

4 Press (or ) to apply the selected style setting to the text.

TAPE MARGIN

This function can be used to leave equal margins of 1/6" (4 mm (#)), 1/2" (12 mm (##)) or

1" (24 mm (###)) on both sides of the text. Using the “–” tape margin setting, multiple formats can be printed with margin (8 mm), one after the other without feeding the tape, onto a single label.

Note: To quit the following procedure at any time without making any changes, press .

1 Press .

2 Press and until MARGIN is displayed, and then press

The current tape margin setting appears in the display.

3 Press

4 Press

and

(or

until the desired tape margin setting is displayed.

(or

) to apply the selected tape margin setting to the text.

).

Note:

• After printing with the “–” tape margin setting, hold down and press once to feed the tape before pushing in the tape cutter lever to cut it, otherwise some of the printed characters may be cut off.

• After printing with the # or ## tape margin setting, push in the tape cutter lever to cut off the label, and then use scissors to cut along the printed dots (:) and center the text within the label.

PRINTING & CUTTING

After you have entered the text and chosen the desired format settings, you are ready to print the label.

● To print the label, press . The message “PRINT” is displayed while the label is being printed, and the label comes out of the tape exit slot at the top end of the machine.

● To feed out 1 1/24" (25 mm) of tape (for example, after printing using the “–” tape margin setting), hold down and press once. The message “FEED” is displayed while the tape is fed out.

● To cut off the label, push in the tape cutter lever in the top-right corner of the machine.

Note:

• To avoid injures, do not touch the cutter’s edge.

• In order to prevent damage to the tape, do not try to cut it while the messages

“PRINT” or “FEED” are displayed.

• After printing with the # or ## tape margin setting, push in the tape cutter lever to cut off the label, and then use scissors to cut along the printed dots (:) and center the text within the label.

UNDERLINE/FRAME

This option allows you to emphasize or decorate your entire text by framing or underlining it. If any setting other than OFF is selected, the Undl/Frm indicator at the bottom of the display lights up.

OFF (no underline or frame) ROUND WOODEN

POINTING

Note:

• The underline or frame is not printed if the VERTICAL style setting is used.

• To quit the following procedure at any time without making any changes, press

1 Press .

2 Press and until UNDL/FRM is displayed, and then press (or

The current underline/frame setting appears in the display.

3 Press and until the desired underline/frame setting is displayed.

4 Press (or ) to apply the selected underline/frame setting to the text.

.

).

MIRROR PRINTING

CANDY UNDL (underline)

This function prints your label so that the text can be read from the adhesive side of the tape. If mirror-printed labels are attached to glass or some other transparent material, they can be read correctly from the opposite side.

Note:

• With this function, the text must be printed on transparent tape.

• To quit the following procedure at any time without making any changes, press

1 Press .

.

2 Press and until MIRROR is displayed, and then press (or

The current mirror printing setting appears in the display.

3 Press and until the desired mirror printing setting is displayed.

4 Press (or ) to apply the selected mirror printing setting to the text.

).

REPEAT PRINTING

This function allows you to print up to nine copies of the same label.

Note: To quit the following procedure at any time without making any changes, press

1 Press .

.

2 Press and until REPEAT is displayed, and then press message “1-9?” appears in the display.

(or ). The

3 Press and until the number of labels that you want to print appears on the right side of the display.

OR

Press the key (1-9) corresponding to the number of labels that you want to print.

4 Press (or or ) to print the labels.

Note:

• After printing with the “–” tape margin setting, hold down and press once to feed the tape before pushing in the tape cutter lever to cut it.

• After printing with the #, ## or ### tape margin setting, push in the tape cutter lever to cut off the tape, and then use scissors to cut along the printed dots (:) and separate the labels.

NUMBERING

This function can be used to print many copies of the same text while increasing a selected number by 1 after each label is printed, for example, when printing labels containing a serial number (for example, 0123, 0124, and 0125).

Note: To quit the following procedure at any time without making any changes, press

1 Position the cursor below the number that you wish to increase.

2 Press .

.

3 Press and until NUMBER is displayed, and then press (or ).

The message “1-9?” appears in the display.

4 Press and until the last number that you want to print appears on the right side of the display.

OR

Press the key (1-9) corresponding to the last number that you want to print.

Note: The last number that will be printed must be larger than the number selected in the text, otherwise the message “ERROR” will appear when you try to print.

5 Press (or or ) to print the labels.

Note:

• After printing with the “–” tape margin setting, hold down and press once to feed the tape before pushing in the tape cutter lever to cut it.

• After printing with the #, ## or ### tape margin setting, push in the tape cutter lever to cut off the tape, and then use scissors to cut along the printed dots (:) and separate the labels.

MEMORY

You can use the memory to store your most frequently used text. The text file remains in the memory, even after all characters are removed from the display by holding down and pressing . Later, the text can easily be reused by recalling it from the memory.

The machine’s memory can store up to 300 characters including spaces, which can be divided into as many as nine text files. The maximum capacity for a single text file is 55 characters including spaces.

STORING TEXT

Note: To quit the following procedure at any time without making any changes, press

1 Press .

2 Press and until MEMORY is displayed, and then press (or

.

).

3 Press and until STORE is displayed, and then press message “1-9?” appears in the display.

(or ). The

4 Press and until the file number where you want to store the text is displayed.

OR

Press the key (1-9) corresponding to the file number where you want to store the text.

5 Press (or ) to store the text. The text previously shown in the display reappears.

Note:

• To avoid injures, do not touch the cutter’s edge.

• If the file number you selected already contains text, the message “ERROR” appears. Press (or ), and then select a different file number.

• If nine text files are already stored, the message “ERROR” appears. Press

(or ), and then delete one of the stored text files before trying to store the current text.

• If 300 characters are already stored, the message “FULL” appears. Press

(or ), and then delete one of the stored text files before trying to store the current text.

TROUBLESHOOTING

Problem

1. The display stays blank after you have turned on the machine.

2. The machine does not print, or the printed characters are blurred.

3. The printed characters are not formed properly.

4. Striped tape appears.

5. The memory has cleared on its own.

6. A blank horizontal line appears through the printed label.

7. The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on).

Solution

• Check that the batteries are correctly inserted.

• If the batteries are weak, replace them.

• Check that the adapter is correctly connected.

• Check that the tape cassette has been inserted correctly.

• Verify that the tape cassette is not empty and if so replace the tape cassette.

• Check that the character size is appropriate for the width of the tape that is used.

• If the batteries are weak, replace them.

• The tape cassette is empty. Replace it.

• The batteries may be weak. Replace them.

• There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up and down motion. Try printing again and if the dust still remains, dip a cotton swab in isopropyl (rubbing) alcohol and gently wipe the print head again.

• Turn off the machine, and then while holding down and , press

to turn the machine back on.

Finally, release and .

Note: The text and formats in the display and all text files stored in the memory are erased.

RECALLING TEXT

Note: To quit the following procedure at any time without making any changes, press

1 Press .

2 Press and until MEMORY is displayed, and then press (or

.

).

3 Press and until RECALL is displayed, and then press message “1-9?” appears in the display.

(or

4 Press

5 Press

and

OR

Press the key (1-9) corresponding to the file number of the text that you want to recall.

(or

until the text file that you want to recall is displayed.

) to clear the display and recall the selected text.

). The

DELETING A TEXT FILE

Note: To quit the following procedure at any time without making any changes, press

1 Press .

2 Press and until MEMORY is displayed, and then press (or

.

).

3 Press and until DELETE is displayed, and then press message “1-9?” appears in the display.

(or

4 Press

5 Press

and

OR

Press the key (1-9) corresponding to the file number of the text that you want to delete.

(or

until the text file that you want to delete is displayed.

) to delete the selected text file.

). The

ERROR MESSAGE LIST

ERROR

BATTERY

B A T T E R Y

FULL

An error has occured such as the tape is incorrectly loaded or the font selected is to large for the tape, etc...

The batteries are weak.

The batteries are empty.

The maximum number of characters (55 characters including spaces) have already been entered or the memory is full.

SPECIFICATIONS

Keyboard:

Print speed:

Character size:

Character font:

Print tape:

LCD:

Power supply:

42 keys

10 mm/sec.

Standard size

Double width

Double height

Double width & double height

4

× width & double height

HELSINKI

Pressure-sensitive adhesive-based (TZ tape only)

Three widths available:

1/2" (12 mm)

3/8" (9 mm)

1/4" (6 mm)

7

× 5 dots 1 line × 8 characters

Six AAA size alkaline batteries (LR03) or optional AC adapter

(7V, 1.2A)

Auto-power off

6 1/16" (154 mm) (W)

× 5 5/64" (129 mm) (D) × 2 1/2" (64 mm) (H)

0.9 lbs. (400 g) (without batteries and tape cassette)

55 characters including spaces

Dimensions:

Weight:

Buffer size:

Memory size: 300 characters including spaces maximum, 9 text files

Warranty

(For USA Only)

90 Days/One Year Limited Warranty and Replacement Service. For further details regarding the warranty please refer to the warranty card that is included with this product. Thank you for purchasing this Brother Product. We hope that you will enjoy using it. We suggest that you keep all packing and other materials.

SHOULD YOU ENCOUNTER ANY PROBLEMS WITH YOUR PRODUCT,

PLEASE DO NOT RETURN YOUR

PRODUCT TO THE STORE!

After referring to the instruction manual, if you still need assistance, call Brother Customer

Service at:

Voice: 1-877-4-PTOUCH

Web: www.brother.com

Fax: 1-901-379-1210

If you need to locate a service center please call 1-800-284-HELP or visit us at www.brother.com