American Audio HD88CC5 Specification

American Audio HD88CC5 Specification
2009 Catalog
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
1
2009
MASTER CATALOG
CONTENTS
02 . . . . . . . .
03 . . . . . . . .
05 . . . . . . . .
07 . . . . . . . .
12 . . . . . . . .
16 . . . . . . . .
18 . . . . . . . .
20 . . . . . . . .
25 . . . . . . . .
35 . . . . . . . .
39 . . . . . . . .
44 . . . . . . . .
49 . . . . . . . .
56 . . . . . . . .
60 . . . . . . . .
63 . . . . . . . .
75 . . . . . . . .
76 . . . . . . . .
78 . . . . . . . .
80 . . . . . . . .
89 . . . . . . . .
II . . . . . . . . . .
V .........
V .........
New Products
Warranty Statement
IR Receiver Kits
IR Receivers
Connecting Blocks
IR Emitters
IR Accessories
HD Video Distribution
HD Video and Audio Switching
SPLCD Touchpanel Controllers
Keypads and Remotes
Controllers and Switchers
Speakers
Volume Controls and Speaker Selectors
Amplifiers
Multi-Zone Distribution and Control
Source Components
Audio/Video Switchers
Accessories
Digital Delivery System
Diagrams
Product Index
Terms & Conditions
Return Authorization Policy
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
1
NEW PRODUCTS
IR Products
DESIGNER IR
2
p5-19
Digital Delivery System
p80-88
283DPRO & 282DPRO
p16-17
MRC88m
MRAUDIO8X8m
p64
HDMIC5IRD
p24
HD88C/CC5
p26
XT1
p75
XIS100
p75
MRWC
p74
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
(Effective for products sold after October 1, 2006) Xantech Corporation (“Xantech”) warrants to the holder of a valid proof
of purchase as the first end-user purchaser (“You”), its products to be free from defects in materials and workmanship
as defined herein, for the periods specified below from the date of purchase. This limited warranty extends only to You
for product purchased and used in the United States of America. For product purchased outside of the United States
of America, the terms of this warranty apply EXCEPT that You must contact the Xantech Authorized Distributor in your
region for warranty services. Product is not intended for end user installation. If within the applicable warranty period
above You discover such item was not as warranted above and You promptly notify Xantech in writing, Xantech shall
repair or replace the items at its option. Xantech may elect which remedy or combination of remedies to provide in
its sole discretion. Xantech may use functionally equivalent reconditioned/refurbished/pre-owned or new products or
parts under this limited warranty. This warranty shall not apply (a) to product which shall have been installed by other
than an authorized Xantech installer, (b) to installed product which is not installed to Xantech’s specifications, (c) to
product which shall have been repaired or altered by others than Xantech, (d) to charges for installation or set up or
adjustment of customer controls, (e) to product that has suffered normal cosmetic deterioration (f) to product which shall
have been subjected to negligence, misuse, abuse, accident, or damage by circumstances beyond Xantech’s control,
including, but not limited to, lightning, flood, electrical surge, tornado, earthquake, or any other catastrophic events
beyond Xantech’s control, or (g) to product which shall have been subjected to improper operation, connected equipment
failure or malfunction, inadequate packing or shipping damage, maintenance or storage, or to other than normal use of
service. (h) if parts are no longer available to repair, or replace the product or to provide a functionally equivalent product.
The foregoing warranties do not cover reimbursement for labor, transportation, shipping, removal, installation, or other
expenses which may be incurred in connection with repair or replacement. All claims for product shipping damage must
be processed within 3 days of receipt by You. Supplied batteries are not covered by this warranty. For the purpose of this
warranty, Lifetime is defined as seven (7) years from the discontinuance of sales of that product by Xantech.
A Xantech Return Authorization (RA) must be obtained from Xantech by You, your installer or your distributor for product
covered under this warranty. Covered product must be sent to Xantech together with proof of purchase, RA number,
prepaid and insured to Xantech. Freight collect shipments will be refused. Risk of loss or damage in transit is borne by
the sender. Xantech’s warranty does not cover products which have been received improperly packaged, altered, or
physically damaged. Products will be inspected upon receipt.
Except as may be expressly provided and authorized in writing by Xantech, Xantech shall not be subject to any other
obligations or liabilities whatsoever with respect to equipment manufactured or sold by Xantech or services
rendered by Xantech.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
ATTENTION: TO OUR VALUED CONSUMERS To insure that consumers obtain quality pre-sale and after-sale support and
service, Xantech products are sold exclusively through authorized dealers and authorized distributors. Xantech products
are not sold online. The warranties on Xantech products are NOT VALID if the products have been purchased from an
unauthorized distributor or an online e-tailer. In order to determine if your Xantech re-seller is authorized, please call
Xantech (800) 843-5465.
XANTECH PRODUCT (go to xantech.com/warranty for model numbers)
WARRANTY DURATION
IR Receivers and IR Emitters
Limited Lifetime
A/V Distribution and Control
Limited Lifetime
Remote Control Switchers
Limited Lifetime
Modules and Connecting Blocks
Limited Lifetime
Accessories
Limited Lifetime
Speakers
Limited Lifetime
Volume Controls and Speaker Selectors
5 year Limited
DDS MRC, BX, ZPR and Commercial Products
2 year Limited
Amplifiers
2 year Limited
Control Interfaces
2 year Limited
Hand Held Remote Controls
1 year Limited
SPLCD Products
1 year Limited
Source Components
1 year Limited
HDMI
2 year Limited
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
IR Products
WARRANTY STATEMENT
3
IR Products
BASIC IR REPEATER APPLICATION DIAGRAM
PLASMA PROOF DINKY LINK™ KIT Page 5
• Prepackaged kit includes:
(1) 480-95D Dinky Link
(1) 789-44 Connecting Block
(1) 781ERGPS Power Supply
(4) 283D Visible Designer Emitters
The Plasma Proof Dinky Link is an easy to install, surface
mount IR Receiver that eliminates IR interference from
Plasma Displays that can affect system control. This
allows control an entire rack of equipment whether it’s just
out of sight or in another room. Place the A/V equipment in
a seperate location for a clean and professional
looking installation
MULTI-ZONE A/V & SURROUND AUDIO SYSTEM DIAGRAM
4
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
TO PURCHASE THE PERFECT IR SYSTEM, SIMPLY FOLLOW THESE 3 STEPS:
Step 1: Choose the right IR receiver - What type of TV/Video Display or just Video Display technology is in the system?
Plasma Proof IR Receivers: Use when Plasma Displays or direct sunlight/compact fluorescent lights are
present. Plasma displays emit infrared light that interferes with IR controls. Xantech’s patented Plasma Proof IR Receivers
eliminate this interference
LCD/CFL Proof IR Receivers: Use when LCD Displays or direct sunlight/compact fluorescent lights are
present. LCD displays emit light wavelengths that interfere with IR carrier frequencies. Xantech’s exclusive frequency range
adjustment eliminates this problem.
Standard IR Receivers: The most commonly used IR receivers. Work great with DLP, standard CRT video and
291 Series Hidden Link™ Shelf-top
480 Series Surface Mount Dinky Link™
490 Series Micro Link™ Peephole style
780* Series J-box Receiver
*Not available in kit
Step 3: Choose the right IR Receiver Kit
Select one of the following IR Receiver kits
or put together your own kit by selecting the proper IR receiver and either the 4 source or 10 source
IR Ready connecting block/emitter package. (IRDY4KIT, IRDY10KIT see page 10.)
PLASMA PROOF IR RECEIVER KITS – US Patent Approved
IR Products
rear-projection displays.
Step 2: Select the right IR receiver style
Xantech has a variety of receiver styles to choose from:
Use when Plasma Displays or direct sunlight/compact fluorescent lights are present. Plasma displays emit infrared light that
interferes with IR controls. Xantech’s patented Plasma Proof IR Receivers eliminate this interference.
DINKY LINK PLASMA PROOF IR RECEIVER KIT
• Prepackaged kit includes:
(1) 48095D Dinky Link
(1) 781ERGPS Power Supply
(1) 789-44 Connecting Block
(4) 283D Visible Designer Emitters
Order Black: 48095DBKIT Order White: 48095DWKIT Order Silver: 48095DSKIT
International Version Available
Order Black: 48095DBKE Order White: 48095DWKE Order Silver: 48095DSKE
SHELF-TOP PLASMA PROOF IR RECEIVER KIT
• Prepackaged kit includes:
(1) 29195D Shelf Top
(1) 781ERGPS Power Supply
(1) 789-44 Connecting Block
(4) 283D Visible Designer Emitters
Order Black: 29195DBKIT Order White: 29195DWKIT Order Silver: 29195DSKIT
International Version Available
Order Black: 29195DBKE Order White: 29195DWKE Order Silver: 29195DSKE
MICRO LINK PLASMA PROOF IR RECEIVER KIT
• Prepackaged kit includes:
(1) 49095D Peephole-Style*
(1) 781ERGPS Power Supply
(1) 789-44 Connecting Block
(4) 283D Visible Designer Emitters
Order: 49095DKIT
International Version Available
Order: 49095DKE
*Includes Three colored bezels (Brass, Black and White).
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
5
LCD/CFL PROOF IR RECEIVER KITS
Use when LCD Displays or direct sunlight/compact fluorescent lights are present. LCD displays emit light wavelengths that
interfere with IR carrier frequencies. Xantech’s exclusive frequency range adjustment eliminates this problem.
DINKY LINK LCD/CFL IR RECEIVER KIT
• Prepackaged kit includes:
(1) 48085D Dinky Link
(1) 789-44 Connecting Block
(1) 781ERGPS Power Supply
(4) 283D Visible Designer Emitters
Order Black: 48085DBKIT Order White: 48085DWKIT Order Silver: 48085DSKIT
International Version Available
Order Black: 48085DBKE Order White: 48085DWKE Order Silver: 48085DSKE
UPC#:427773150UPC#:4277731508
IR Products
SHELF-TOP LCD/CFL IR RECEIVER KIT
• Prepackaged kit includes:
(1) 29185D Shelf-Top
(1) 789-44 Connecting Block
(1) 781ERGPS Power Supply
(4) 283D Visible Designer Emitters
Order Black: 29185DBKIT Order White: 29185DWKIT Order Silver: 29185DSKIT
International Version Available
Order Black: 29185DBKE Order White: 29185DWKE Order Silver: 29185DSKE
MICRO LINK LCD/CFL IR RECEIVER KIT
• Prepackaged kit includes:
(1) 49085D Peep Hole*
(1) 781ERGPS Power Supply
(1) 789-44 Connecting Block
(4) 283D Visible Designer Emitters
Order: 49085DKIT
International Version Available
Order: 49085DKE
* Includes Brass, Black and White Bezels.
DLP/CRT STANDARD IR RECEIVER KITS
DINKY LINK QUICK CONNECT IR RECEIVER KIT
• Prepackaged kit includes:
(1) 48010D Dinky Link
(1) 789-44 Connecting Block
(1) 781ERGPS Power Supply
(4) 283D Visible Designer Emitters
Order Black: 48010DBKIT Order White: 48010DWKIT Order Silver: 48010DSKIT
International Version Available
Order Black: 48010DBKE Order White: 48010DWKE Order Silver: 48010DSKE
UPC#: 42777312677731270
SHELF-TOP IR RECEIVER KIT
• Prepackaged kit includes:
(1) 29110D Shelf Top
(1) 789-44 Connecting Block
(1) 781ERGPS Power Supply
(4) 283D Visible Designer Emitters
Order Black: 29110DBKIT Order White: 29110DWKIT Order Silver: 29110DSKIT
International Version Available
Order Black: 29110DBKE Order White: 29110DWKE Order Silver: 29110DSKE
UPC#: 4277731068
MICRO LINK IR RECEIVER KIT
•Prepackaged kit includes:
(1) 49010D Peep Hole Style
(1) 781ERGPS Power Supply
Order: 49010DKIT
International Version Available
Order: 49010DKE
(1) 789-44 Connecting Block
(4) 283D Visible Designer Emitters
UPC#:4277731069
6
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
PLASMA PROOF IR RECEIVERS
Individual IR Receivers can be added to IR Receiver Kits, IRDY Kits or any Xantech IR Connecting Block.
MICRO LINK PLASMA PROOF IR RECEIVER
Designed to work with plasma displays - Peephole-Style installs in cabinet doors or walls
Dimensions: 3/4” (19mm) diameter, 2” (51mm) deep
Talkback LED for system tests
IR input bandwidth: 30 - 100 kHz
Nominal reception range: > 50 feet
US Patent Approved
Includes Brass, White and Black bezels
Order: 49095D
UPC#:4277731261
J-BOX PLASMA PROOF IR RECEIVER
•
•
•
•
•
•
Designed to work with plasma displays
Fits standard decora J-box (Decorator trim plate not included)
Talkback LED for system tests
IR input bandwidth: 30 - 100 kHz
Nominal reception range: > 50 feet
US Patent Approved
Order: 78095
UPC#:4277731307LCD/CFL PROOF IR RECEIVERS
IR Products
•
•
•
•
•
•
•
DINKY LINK PLASMA PROOF IR RECEIVER
•
•
•
•
•
•
Designed to work with plasma displays - Attaches discretely to front of TV
Extremely small package, 7/16” x 5/16” x 2 1/2” (11mm x 8mm x 64mm)
Talkback LED for system tests
IR input bandwidth: 30 - 100 kHz
Nominal reception range: > 50 feet
US Patent Approved
Order Black: 48095DB Order White: 48095DW Order Silver: 48095DS
SHELF-TOP PLASMA PROOF IR RECEIVER
•
•
•
•
•
•
Designed to work with plasma displays - Place on shelf-top or cabinet near TV
Compact package: 3 1/4” x 1” x 2” (83mm x 26mm x 51mm)
Talkback LED for system tests
IR input bandwidth: 30 - 100 kHz
Nominal reception range: > 50 feet
US Patent Approved
Order Black: 29195DB Order White: 29195DW Order Silver: 29195DS
UPC#:4277731311
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
7
LCD/CFL PROOF IR RECEIVERS
MICRO LINK LCD/CFL PROOF IR RECEIVER
•
•
•
•
•
•
•
Designed to work with LCD displays and CFL lights
IR modulation frequency bandwidth: 30 - 60 kHz
Adjustable IR carrier frequency: 32 to 56 kHz (allows matching to actual component for optimum performance)
Nominal reception range: > 40 feet
Dimensions: 3/4” (19mm) diameter, 2” (51mm) deep
Talkback LED for system tests
Includes Brass, Black and White Bezels.
Order: 49085D
IR Products
J-BOX LCD/CFL PROOF IR RECEIVER
•
•
•
•
Designed to work with LCD displays and CFL lights
Fits standard J-box (Decorator trim plate not included)
IR modulation frequency bandwidth: 30 - 60 kHz
Adjustable IR carrier frequency: 32 to 56 kHz
(allows matching to actual component for optimum performance)
• Nominal reception range: > 40 feet
• Talkback LED for system tests
Order: 78080
DINKY LINK LCD/CFL PROOF IR RECEIVER
• Designed to work with LCD displays and CFL lights - Attaches discretely to front of TV
• IR modulation frequency bandwidth: 30 - 60 kHz
• Adjustable IR carrier frequency: 32 to 56 kHz
(allows matching to actual component for optimum performance)
• Nominal reception range: > 40 feet
• Extremely small package, 7/16” x 5/16” x 2 1/2” (11mm x 8mm x 64mm)
Order Black: 48085DB Order White: 48085DW Order Silver: 48085DS
UPC#:4277731280
UPC#:4277731282
UPC#:4277731281
SHELF-TOP LCD/CFL PROOF IR RECEIVER
• Designed to work with LCD displays and CFL lights - Place on shelf-top or cabinet near TV
• IR modulation frequency bandwidth: 30 - 60 kHz
• Adjustable IR carrier frequency: 32 to 56 kHz
(allows matching to actual component for optimum performance)
• Nominal reception range: > 40 feet
• Compact package, 3 1/4” x 1” x 2” (83mm x 26mm x 51mm)
Order Black: 29185DB Order White: 29185DW Order Silver: 29185DS
UPC#:4277749002
8
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
172 XTRA LINK2™ IR OVER COAX RECEIVER KIT
The Xtra Link 2 system provides full IR remote control operation of most IR controlled devices from a second room using the
same coaxial cable that carries the TV RF signal from the source equipment located in the main room to the second room.
Easily hooks-up in minutes without tools. All necessary parts are included. Double the value of your source components by
controlling them from another room with the Xtra Link 2 system.
IR OVER COAX DLP/CRT SHELF-TOP IR RECEIVER KIT
IR OVER COAX Xpansion Kit
• 172-94X kits are used along with one standard 172-94 when installing
Xtra Links in more than one room.
This avoids duplication of couplers, emitters and coax jumper cables
• Xtra Link2 Xpansion Kit Includes:
(1) 291 Infrared Receiver
(1) INJ94 Injector
(1) 781ERGPS Power Supply
(1) Coax jumper cable with RF connectors
Order: 17294XRP
UPC#:4277730001
IR Products
• Standard Broadband IR Receiver Kit over COAX
The complete 172 Xtra Link2 package includes the following:
(1) 291 Infrared Receiver
(1) 286D Dual Visible Designer emitter
(1) INJ94 Injector
(1) 781ERGPS 12V Power Supply
(1) CPL94B Coupler
(2) Coax jumper cables with RF connectors
Order: 17294RP
UPC#: 4277717294
IR RF BYPASS KIT
•The BYPASS kit is an advance accessory to the Xtra Link 2 system. All necessary parts are included for
advance installations where the IR control signals need to be routed around RF amplifiers and non-DC passing splitters.
• Kit contains two CPL10’s, one jumper cable with a 3.5mm mini mono plug on each end and
two short RG-59 cables with “F” connectors on each end
Order: BYPASS94
UPC#:4277730094
INJ94 RF/IR INJECTOR
• The INJ94 is an expansion accessory to the Xtra Link 2 system. This additional component can be used
for expanding installations where IR control signals need to be injected from additional areas along the coaxial cable.
Requires a 781ERGPS power supply and any Xantech IR receiver (w/ 3.5mm stereo mini plug).
Order: INJ94
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
9
IRDY IR READY KITS
Add any Xantech IR Receiver for a complete IR system.
IR READY FOUR SOURCE KIT
New Xantech IRDY KITS contain the building blocks for a basic IR system.
Select an IRDY KIT for either four or ten source components, and then
match it with the right Xantech IR receiver for the job. Kit Includes :
(4) 283D Visible Designer Emitters
(1) 781ERGPS 12V Power Supply
(1) 789-44 Connecting Block
IR Products
Order: IRDY4KITRP
IR READY TEN SOURCE KIT
Kit Includes
(10) 283D Visible Designer Emitters
(1) 781ERGPS 12V Power Supply
(1) 791-44 Connecting Block
Order: IRDY10KITRP
UPC#:4277731311
10
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
STANDARD IR RECEIVERS
Individual IR Receivers can be added to IR Receiver Kits, IRDY Kits or any Xantech IR Connecting Block.
MICRO LINK DLP/CRT J-BOX MOUNT IR RECEIVER
• J-box version of the 490W-00. Includes a white decorator style insert for single gang mounting.
• IR modulation frequency bandwidth: 30 - 100 kHz
• Nominal reception range: > 30 feet
• Receiver Dimensions: 1/2” (13mm) diameter, 2” (51mm) deep
• Talkback LED for system tests
Order: 0490DW00
UPC#:4277749001
IR Products
J-BOX DLP/CRT IR RECEIVER
• Standard Broadband IR Receiver
• Fits standard decora J-box (Decorator trim plate not included)
• Talkback LED for system tests
• IR modulation frequency bandwidth: 30 - 100 kHz
• Nominal reception range: > 30 feet
Order: 78010
UPC#:4277778010
SHELF-TOP STANDARD IR RECEIVER
• Standard Broadband IR Receiver - Place on shelf-top or cabinet near TV
• IR modulation frequency bandwidth: 30 - 100 kHz
• Nominal reception range: > 30 feet
• Compact package, 3 1/4” x 1” x 2” (11mm x 8mm x 54mm)
• Talkback LED for system tests
Order Black: 29110DB Order White: 29110DW Order Silver: 29110DS
UPC#:4277729110
DINKY LINK DLP/CRT QUICK CONNECT IR RECEIVER
• Standard Broadband IR Receiver - Attaches discretely to front of TV
• IR modulation frequency bandwidth: 30 - 100 kHz
• Nominal reception range: > 30 feet
• Extremely small package, 7/16” x 5/16” x 2 1/8” (11mm x 8mm x 54mm)
• Talkback LED for system tests
Order Black: 48010DB Order White: 48010DW Order Silver: 48010DS
MICRO LINK STANDARD IR RECEIVER
• Standard IR Receiver - Peephole-Style installs in cabinet doors or walls
• IR modulation frequency bandwidth: 30 - 100 kHz
• Nominal reception range: > 30 feet
• Dimensions: 1/2” (13mm) diameter, 2” (51mm) deep
• Talkback LED for system tests
• Includes Brass, White and Black Bezels
Order: 49010D
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
11
CONNECTING BLOCKS
Individual connecting blocks require IR Receiver, IR Emitters & Power supply and are also compatible with SmartPad3 Keypads
ONE ZONE FOUR SOURCE CONNECTING BLOCK
Connecting Blocks
• Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
• Four parallel emitter ports with 470-Ohm resistors drive four single or four dual emitters
• Quick-connect stereo mini jack for IR Receivers that use a stereo mini plug
• STATUS terminal for connection of IR Receivers and Keypads that have status LED’s
• 2.1 mm coaxial power jack
• Requires either the 781ERGPS or 782ERGPS power supply
• Dimensions: 3” x 1 3/4” x 13/16” (77mm x 45mm x 21mm)
• Power LED
Order: 78944
UPC#:4277778944
ONE ZONE FOUR SOURCE CONNECTING BLOCK Five Pack
Save 5% On Value Pack
• Save time and money. Includes five 789-44 connecting blocks
Order: 78944CB5P
UPC#:4277731486
ONE ZONE FOUR SOURCE CONNECTING BLOCK Including Power supply
• 789-44 with included 781ERGPS Power Supply
Order: 78944PSRP
UPC#:4277731070
ONE ZONE FOUR SOURCE IN-WALL DECORATOR CONNECTING BLOCK
•
•
•
•
•
•
•
•
•
Similar to the standard 789-44 but used in a single gang J-box configuration
Can be used at either end of an infrared bus system
Four parallel emitter ports on external connecting plate
Quick connect stereo mini jack on external connecting plate for Xantech IR receivers
that are equipped with the stereo mini plug
2.1mm coaxial power jack on external connecting plate
Four-terminal plug in connector on the back of the plate for Power and IR Signal
Available in white and ivory
Dimensions: 2 15/16” x 1 3/4” x 13/16” (75mm x 45mm x 21mm)
Requires 781ERGPS Power Supply
UPC#:4277731106
Order White: 78944DW
Order Ivory: 78944DI
UPC#:4277731107
ONE ZONE TEN SOURCE AMPLIFIED CONNECTING BLOCK
•
•
•
•
•
•
•
Emitter port jumpers permit high or low power IR output
High-speed opto-isolator for improved operation
Parallel emitter ports drive 10 single or 10 dual emitters
Contains red LED input signal Test-IR
Requires either the 781ERGPS or 782ERGPS Power Supply
Dimensions: 6” x 2 1/4” x 15/16” (153mm x 58mm x 24mm)
Up to nine 790-00’s can be connected to the 791-44 for control of
up to 100 devices in a single zone
• STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED’s
• Quick connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug
Order: 79144
UPC#:4277779144
12
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
CONNECTING BLOCKS
Individual connecting blocks require IR Receiver, IR Emitters & Power supply and are also compatible with SmartPad3 Keypads
FOUR ZONE TEN SOURCE AMPLIFIED CONNECTING BLOCK
Controls four individual zone’s equipment
Can control two pieces of equipment per zone
Controls 10 pieces of equipment used for common sources
Expandable to nine zones with the model 796-20 Zone Expander
14 test LED’s indicate proper operation and hook-up
Isolated input for each zone
Dimensions: 1” x 13 1/8” x 1 7/8” (26mm x 340mm x 48mm)
Requires 782ERGPS Power Supply
Order: 79520
UPC#:4277779520
SIX ZONE CONNECTING BLOCK/EXPANDER
•
•
•
•
Expands the 795 Zone Controller to a total of nine zones
Connects directly to the 795 and is powered via the 795
Can be used in conjunction with a 791-44 (without a 795) for a 6 zone system
Multiple 796’s may be used with a 791-44 for even more zones
(limited only by IR noise considerations)
• Dimensions: 1” x 13 1/8” x 1 7/8” (26mm x 340mm x 48mm)
Order: 79620
UPC#:4277779620
ONE ZONE TWO SOURCE CONNECTING BLOCK
•
•
•
•
•
•
Connects two emitter ports and power supply to Xantech IR Receivers that use a stereo mini plug
3.5 mm stereo mini jack for quick-connect IR receivers
Two 3.5 mm mono mini jacks with 470-Ohm resistors drive two single or two dual emitters
2.1 mm coaxial power jack
Requires either the 781ERGPS or 782ERGPS Power Supply
Dimensions: 2 1/8” x 1 1/4” x 3/4” (54mm x 32mm x 19mm)
Order: CB20
Connecting Blocks
•
•
•
•
•
•
•
•
UPC#:4277730008
ONE ZONE SIX SOURCE QUICK CONNECT CONNECTING BLOCK
• Connects six emitter ports and power supply to all Xantech IR
Receivers that use a stereo mini plug
• 3.5 mm stereo mini jack for quick-connect IR Receivers
• 3.5 mm mono mini emitter ports drive six single or six dual emitters in parallel
• Contains a series 100-Ohm resistor per emitter port
• Requires either the 781ERGPS or 782ERGPS Power Supply
Order: CB60
UPC#:4277730009
TWO ZONE CONNECTING BLOCK
•
•
•
•
Simplified version of the 795 controller when only two zones are required
One plug-in screw connector for each zone’s IR receiver and/or keypads
3.5mm mono mini jack for zone and common IR emitters
Can be used with a 791-44 amplified connecting block for
common emitter expansion
• Requires either the 781ERGPS or 782ERGPS Power Supply
• Only to be used with single or dual emitters on the zone outputs
• Dimensions: 3” x 1 3/4” x 13/16” (77mm x 45mm x 21mm)
Order: ZC21
UPC#:4277730011
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
13
CONNECTING BLOCKS
Individual connecting blocks require IR Receiver, IR Emitters & Power supply and are also compatible with SmartPad3 Keypads
MULTIPLE EMITTER CONNECTING BLOCK
Connecting Blocks
•
•
•
•
•
•
Emitter expansion block for the 791-44 or 792-10
Parallel emitter ports drive 10 single or 10 dual emitters
Contains a series 100-Ohm resistor per emitter port
Emitter and IN/OUT ports are 3.5 mm mono mini-jacks
Screw terminals provide for wired input connections
Requires the 792-10 Power Module or the 791-44 Amplified Connecting
Block to drive the 790 block
• Dimensions: 6” x 2 1/4” x 15/16” (153mm x 58mm x 24mm)
Order: 79000
UPC#:4277779000
PHANTOM POWER MODULE FOR IR RECEIVERS
•
•
•
•
•
Provides phantom power for standard Xantech IR receivers.
High current mode drives 790 connecting block
3.5 mm mono mini jack emitter port.
Requires the 781ERGPS Power Supply
Dimensions: 4 1/4” x 1 5/8” x 1” (108mm x 42mm x 26mm)
Order: 79210
UPC#:4277779210
SERIAL CONTROL COMBINER
• Combines IR serial data from up to five A/V receivers
to common source equipment
• Isolating diode system prevents serial control interference between receivers
• DIP switch sets polarity for either positive or negative serial logic systems
• Can be “daisy chained” to accommodate any number of
A/V receivers in multi-zone systems
• Requires same brand components
• Used in multi-zone systems
• Dimensions: 6” x 2 1/4” x 1” (153mm x 58mm x 26mm)
Order: 79310
UPC#:4277779310
UNIVERSAL INTERFACE MODULES
There is a trend in the industry for manufacturers of A/V equipment to have
a “remote” input jack on the back of their equipment. While there are no
standards for the type of signal or input jack on these units, we have created
a series of interface modules to allow any of our IR receivers to interface with
these various jacks. The brands and model numbers are being constantly updated. Call for current information.
Order: 79410 3.5mm stereo mini plug interface cable
Order: 79450 RCA-type phone plug interface cable
UPC#:4277779410
UPC#: 4277779450
SPECIFICATIONS
•
•
•
•
14
Power requirements: 12 volts DC @ 15 milliamps. Requires 781ERGPS Power Supply
Connections: 4-screw terminal connector for interface with Xantech IR Receivers and other devices
3.5 mm mono mini jack for IR emitter, 3.5 mm stereo mini jack for interface cable, 2.1 mm coaxial power jack
Dimensions: 4 1/4” x 1 5/8” x 1” (108mm x 42mm x 26mm)
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
CONNECTING BLOCKS
Individual connecting blocks require IR Receiver, IR Emitters & Power supply and are also compatible with SmartPad3 Keypads
ONE ZONE ONE SOURCE CONNECTING BLOCK
• Connects one emitter port and power supply to Xantech IR Receivers that use a stereo mini plug
• Also includes a three-terminal block for wired connection of Xantech IR Receivers
and Smart Pads
• 3.5 mm stereo mini jack for quick-connect IR receivers
• 3.5 mm mono mini jack for one single or one dual emitter
• 2.1 mm coaxial power jack
• Requires either the 781ERGPS or 782ERGPS Power Supply
• Dimensions: 2 1/8” x 1 1/4” x 3/4” (54mm x 32mm x 19mm)
UPC#:4277730012
“THE STRIP-IR” PARALLEL CONNECTING BLOCK
• Easily connects home run wires from multiple IR Receivers to the input
• High current design (12 Amps peak) allows amplifiers rated as high
as 500 watts to be used with the CB18
• One-in eight-out or eight-in one-out capability
• Nine four-terminal plug-in connectors on 4-conductor bus
• Screw terminals handle wire sizes from 24 to 12 gauge
• Dimensions: 11 1/4” x 1 1/4” x 1 1/4” (286mm x 32mm x 32mm)
Order: CB18
UPC#:4277730007
ADDRESSABLE IR ROUTERS
RT16-10
Connecting Blocks
Order: CB12
The RT16-10 Router is a one-in/sixteen-out switcher which directs IR control signals to any or all 16 output ports.
Order: RT1610
UPC#:4277730046
RT8
The RT8 is a one in/eight out version of the RT16-10.
UPC#:4277731010
•
•
•
•
•
RT8 requires a 782ERGPS power supply
RT16-10 requires a 782ERGPS power supply
Requires RC68X Programmer
RT16-10 fits standard 19” rack mount
A four-terminal plug-in connector, “IR RCVR INPUT”,
permits connection of IR Receivers, Keypads,Controllers, etc
Order: RT8
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
15
STANDARD HIGH OUTPUT IR EMITTERS
Minimum Requirement: IR Receiver, Connecting Block & Power Supply. Are compatible with all Xantech IR Systems
STANDARD HIGH OUTPUT DESIGNER EMITTER
• Non-visible, high-output version
• Deep purple Lexan™ shell
• Clear adhesive film included on emitter housing for attachment to IR
window of controlled component
• Includes 3 pre-cut adhesive backings for replacement purposes
• Lead is terminated with a 3.5mm mono mini plug
• Length of wire: 10 feet
Order: 282D
UPC#:4277728201
IR Emitters
DESIGNER EMITTER Value Pack
Save 5% On 5 Pack Order: 282D5P
Save 10% On 10 Pack Order: 282D10P
DESIGNER Pro
• Same Xantech performance as 282
• Quick connect for easy service
Order: 282DPRO
DESIGNER EMITTER With Twin Plug
•
•
•
•
282D high-output Designer Emitter with two 3.5mm plugs
Allows control of single source by two IR systems
Diode isolation for independent control and component protection
Wire length: 10 feet
Order: 282DTP
UPC#:4277731343
‘NAKED’ EMITTER
282M high-output Emitter with no shell surrounding emitter head
• Allows insertion of emitter inside component case for the cleanest appearance possible
• Wire length: 10 feet
Order: 282X
UPC#:4277731342
DUAL DESIGNER EMITTER
• Two emitters in series with each other and terminated in a single 3.5mm mono mini plug
• Length of wire: 7 feet to junction, 3 feet to each emitter
• Non-visible, high output version
Order: 284D
UPC#:4277731129
DUAL DESIGNER EMITTER Value Pack
Save 5% On 5 Pack Order: 284D5P
Save 10% On 10 Pack Order: 284D10P
16
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
BLINK-IR EMITTERS STANDARD HIGH OUTPUT IR EMITTERS
VISIBLE DESIGNER EMITTER
•
•
•
•
Visible, red blink, low output version of the 282D
Clear adhesive film for attachment to IR window of controlled component
Includes 3 pre-cut adhesive backings for replacement purposes
Lead is terminated with a 3.5mm mono mini plug • Length of wire: 10 feet
Order: 283D
UPC#:4277728301
VISIBLE DESIGNER EMITTER Value Pack
DESIGNER Pro
• Same Xantech performance as 283
• Quick connect for easy service
Order: 283DPRO
UPC#:4277731254
VISIBLE DESIGNER EMITTER With Mini Wire
• 283D emitter with mini-wire (6 ft. long with 28 gauge wire)
Order: 283DMW
UPC#:4277730096
IR Emitters
Save 5% On 5 Pack
Order: 283D5P
Save 10% On 10 Pack Order: 283D10P
VISIBLE DESIGNER EMITTER With Twin Plug
•
•
•
•
283D Visible Designer Emitter with two 3.5mm plugs
Allows control of single source by two IR systems
Diode isolation for independent control and component protection
Wire length: 10 feet
Order: 283DTP
UPC#:4277731344
DUAL VISIBLE DESIGNER EMITTER
• Two emitters in series with each other and terminated in a single 3.5mm mono mini plug
• Length of wire: 7 feet to junction, 3 feet to each emitter
Order: 286D
UPC#:4277728601
DUAL VISIBLE DESIGNER EMITTER Value Pack
Save 5% On 5 Pack
Order: 286D5P
Save 10% On 10 Pack Order: 286D10P
UPC#:4277731257
BLAST-IR
• Powerful IR transmitting device that can send wireless IR signals across a room
Order Shelf-Top IR Blaster: 39020
UPC#:4277731359
Order J-Box IR Blaster: 38020
UPC#:4277731317
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
17
IR ACCESSORIES
DESIGNER EMITTER SHIELD COVER
• Shield cover for designer emitters
• Effective for covering component IR eyes for IR
Order: 28DES
IR Accessories
EMITTER WIRE DRESSING
Contains adhesive backed, custom sized molded pieces that makes installing mouse emitters fast, clean, and easy.
Package contains:
(1) 1” x1” dressing, thin size (Perfect for the first 3 feet of the emitter)
(1) 1” x 1” dressing, wider size (Intended for the last 3 feet of the emitter)
(1) 1”x 5” dressing, thin size (Perfect for the first 3 feet of the emitter)
(1) 1” x 5” dressing, wider size (Intended for the last 3 feet of the emitter)
Order Silver: MW1S
UPC#:4277731398
Order Black: MW1B
UPC#:4277731399
EMITTER EXTENSION CABLE
• 50-foot, 24-gauge, 3-conductor cable. Use for long emitter runs
• 3.5 mm mini stereo plug on one end and female mini stereo jack on the other.
Order: 078400
UPC#:4277778400
IR RECEIVER SUNSCREEN FILTER KIT
• Used with Xantech’s legendary 480-, 490-, and 780- series IR receivers, the SUNKIT removes unwanted infrared interference.
Two lenses are included, one to reduce overall light conditions by 66%, the other to filter out visible light
and allow only infrared to pass through.
Order: SUNKIT
UPC#:4277731264
DARK PURPLE 780 LENS
• Replacement lens for model 780
Order: 03016400
UPC#:4277730164
5-FOOT MINI PLUG CABLE
• 5 foot cable with a standard 3.5mm mini plug and stripped/tinned leads
• Minimum order quantity of 10 pieces
Order: 06015900
UPC#:4277760159
INFRA RED ADJUSTER
• Adjust IR output
• For use with all connecting blocks
Order: 28ADJ
UPC#:4277760170
HIGH PERFORMANCE EMITTER TAPE
• For use on cured or rough surfaces
• Improves emitter adhesion
Order: 28VHB
UPC#:4277760175
UPC#:4277760174
18
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
IR ACCESSORIES
1-FOOT MONO MINI PLUG CABLE
• 1 foot cable with 3.5mm/3.5mm plug
Order: 06017400
UPC#:4277760170
DUAL 3.5mm MINI JACK ADAPTER
• Dual in-line 3.5mm mini jack, Female to Female
Order: 06017440
UPC#:4277760175
10-FOOT MONO MINI PLUG CABLE
• 10 foot cable with 3.5mm/3.5mm plug
Order: 06017450
UPC#:4277760174
• DC pass design allows IR control signal to pass through freely without the need of a ByPass Kit.
Order: 020000
UPC#:4277720000
FOUR WAY DC PASSIVE SPLITTER
• Four-way version of 200-00.
Order: 020200
UPC#:4277720200
DC BLOCKER
• Used on RF splitter outputs connected to rooms without Xtra Links
• Prevents a connected TV, VCR, etc. from shorting IR control signals on a coax system using Xtra Link 172’s, etc.
Order: 020300
UPC#:4277720300
GROUND BREAKER
IR Accessories
TWO WAY DC PASSIVE SPLITTER
• Eliminates audible hum generated when A/V components are connected directly to a cable TV or Satellite system
• Isolates ground potential differences within an audio/video system without affecting the RF signal
Order: 063400
UPC#:4277763400
POWER SUPPLIES
781ERGPS 12V DC POWER SUPPLY
• Regulated high-efficiency 12V DC for most Xantech remote control devices (marked rating is 12V DC 500mA)
• Powers basic Xantech IR systems
• Uses 2.1mm coaxial plug
Order: 781ERGPS
UPC#:4277731443
781ERGPS POWER SUPPLY Five Pack
• Package contains (5) 781ERGPS Power Supplies Save 5%
Order: 781ERGPS5P
UPC#:4277731259
781ERGPS POWER SUPPLY Ten Pack
• Package contains (10) 781ERGPS Power Supplies Save 10%
Order: 781ERGPS10P
UPC#:4277731260
HIGH CURRENT 12V DC POWER SUPPLY
• Regulated, 12V DC, 1.2 Amp power supply •
Uses 2.1mm coaxial plug
• Power a large number of Xantech devices from a single power supply
Order: 782ERGPS
UPC#:4277778200
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
19
HD Video Distribution
4X4 HDMI SWITCHER: 4 SOURCES TO 4 DISPLAYS
Features
• Distributes any of the four inputs to any or any
combination of the four HDMI™ output displays
• Maintains high resolution video - beautiful, sharp HDTV
resolutions up to 1080p, 2k, and computer resolutions
up to 1920 x 1200 are easily achieved
• Discrete IR codes for all functions.
• Serial RS-232 remote port
• HDMI™ 1.3 compatible
• HDCP compliant
Order: HDMI4X4
4X1 HDMI SWITCHER: 4 SOURCES TO 1 DISPLAY
Features
• Switch easily between any four HDMI™ sources
• Extends the range of HDMI™ capable device by
equalizing the HDMI signal
• Maintains high resolution video - beautiful, sharp HDTV
resolutions up to 1080p, 2k, and computer resolutions
up to 1920 x 1200 are easily achieved
• Discrete IR codes for all functions
• Serial RS-232 remote port
• HDMI™ 1.3 compliant
• HDCP pass-through
20
General Info
• Remote Control (included) (Contains lithium battery)
• (4) HDMI 6 foot cables (included)
• 100-240V Power Supply: 24VDC, 60W max. (included)
• Dimensions: 17”W x 5.875”D x 1.75”H (includes rack ears)
General Info
• Remote Control (included) (Contains lithium battery)
• (4) HDMI 6 foot cables (included)
• 100-240V Power Supply: 5VDC, 10W max. (included)
• Dimensions: 13.25”W x 2.75”D x 1”H
Order: HDMI4X1
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Features
• Switch between any three HDMI™ sources
• Extends the range of HDMI™ capable device by
equalizing the HDMI signal
• Maintains high resolution video - beautiful, sharp HDTV
resolutions up to 1080p, 2k, and computer
resolutions up to 1920 x 1200 are easily achieved
• Discrete IR codes for all functions
• HDMI™ 1.3 compliant
• HDCP pass-through
General Info
• Remote Control (included) (Contains lithium battery)
• (3) HDMI 6 foot cables (included)
• 100-240V Power Supply: 5VDC, 5W max. (included)
• Dimensions: 9.25”W x 2.75”D x 1”H
Order: HDMI3X1
1X4 HDMI SPLITTER: 1 SOURCE TO 4 DISPLAYS
Features
• Connects four HDMI™/DVI displays at the same time
to one video source
• Allows simultaneous display
• Maintains high resolution video - beautiful,
sharp HDTV resolutions up to 1080p, 2k, and computer
resolutions up to 1920 x 1200 are easily achieved
• HDMI™ 1.3 compliant
• HDCP compliant
HD Video Distribution
3X1 HDMI SWITCHER: 3 SOURCES TO 1 DISPLAY
General Info
• HDMI 6 foot cable (included)
• 100-240V Power Supply: 5VDC, 10W max. (included)
• Dimensions: 9”W x 4.25”D x 1.25”H
Order: HDMI1X4
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
21
HD Video Distribution
1X2 HDMI SPLITTER: 1 SOURCE TO 2 DISPLAYS
Features
• Connects two HDMI™/DVI displays at the
same time to one video source
• Allows simultaneous display
• Maintains high resolution video - beautiful,
sharp HDTV resolutions up to 1080p, 2k, and computer
resolutions up to 1920 x 1200 are easily achieved
• HDMI™ 1.3 compliant
• HDCP compliant
General Info
• HDMI 6 foot cable (included)
• 100-240V Power Supply 5VDC, 20W max.
(included)
• Dimensions: 8”W x 4.25”D x 1.25”H
Order: HDMI1X2
HDMI SIGNAL BOOSTER
Features
• Perfects digital video sent over long stretches
of HDMI™ cables
• Extends HDMI™ displays away from the
HDTV source
• Supports resolutions up to 1080p, 2k, and
1920 x 1200
• HDMI™ 1.3 compatible
• HDCP compliant
General Info
• No power supply required
• Positioned closest to display end
• Retail packaged
• Dimensions: 1.625”W x 1.75”D x 0.75”H
Order: HDMIBOOST
22
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Features
• Extends high definition displays up to 200
feet (60 meters) from the source at 1080i
• Extends high definition displays up to 150
feet (45 meters) from the source at 1080p
• Improved compensation for cable skew
• Eliminates equipment noise in the viewing
environment
• Supports resolutions up to 1080p, 2k,
and 1920 x 1200
• Audio and video are transmitted digitally
over the CAT-5e cable for zero signal loss
• HDMI™ 1.3 compatible
• HDCP compliant
General Info
• (2) 100-240V Power Supplies: 5VDC,
20W max. (included)
• HDMI 6 foot cable (included)
• Dimensions: 3.25”W x 3.4”D x 1.25”H
Extend your HDMI source over 200 feet
Order: HDMIEXTEND
(includes Send and Receive)
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
HD Video Distribution
POINT-TO-POINT HDMI/CAT5 EXTENDER
23
HD Video Distribution
POINT-TO-POINT HDMI & IR/CAT5 EXTENDER
Features
• Extends high definition displays up to 120
feet (35 meters) from the source at 1080i
• Extends high definition displays up to 70
feet (21 meters) from the source at 1080p
• Automatic compensation for cable
skew and delay
• Eliminates equipment noise in the viewing
environment
• Supports resolutions up to 1080p, 1080i, 720p, 720i,
480p, 480i
• IR send and receive over CAT-5e
• CAT-5e or CAT-6 cable acceptable
• HDMI™ 1.3 compatible
• HDCP compliant
General Info
• (1) 100-240V Power Supplies: 12VDC, 6W max. (included)
• Dimensions: 3.43”W x 2.40”D x 1.14”H
Extend and control your HDMI source over 120 feet.
Order: HDMIC5IR
(includes Send and Receive)
POINT-TO-POINT HDMI & IR/CAT5 EXTENDER - DECORA
Features
• Extends high definition displays up to 120
feet (35 meters) from the source at 1080i
• Extends high definition displays up to 70
feet (21 meters) from the source at 1080p
• Automatic compensation for cable
skew and delay
• Eliminates equipment noise in the viewing
environment
• Supports resolutions up to 1080p, 1080i, 720p, 720i,
480p, 480i
• IR send and receive over CAT-5e
• CAT-5e or CAT-6 cable acceptable
• HDMI™ 1.3 compatible
• HDCP compliant
General Info
• (1) 100-240V Power Supplies: 12VDC, 6W max. (included)
•Fit in Standard Decora Plate
Coming Soon.
Order: HDMIC5IRD
(includes Send and Receive)
24
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
4X4 HD SWITCHER: 4 SOURCES TO 4 DISPLAYS with CAT5
Features
• Four-Source, Four-Zone High Definition
matrix video switcher with SD video capability
• Buffered component video loop-through and
serial port expansion capability allow
expansion up to 16 zones of total distribution.
• Component video inputs and S/PDIF digital
audio inputs for each source component
• 4 Coaxial Component video + S/PDIF digital audio
outputs for each zone for distribution up to 250 feet
• Four RJ45 outputs for HD video and digital
audio distribution up to 1000 feet over CAT5
• Coaxial component video output and RJ45
output active simultaneously
• Controllable through IR (RC68X) and RS232
commands
• Bandwidth supports resolutions of 1080i,
720p, 480p and 480i
General Info
• Power: 120VAC, 0.25A
• Optional rack mount kit RM2UKIT
• Weight: 9.25 lbs
• Dimensions: 17”W x 7.375”D x 3.93”H
• Power: 120VAC,025A
• Remote Included (Contains lithium battery)
• Also available in 230 VAC
Order: HD44CC5
4X4 HD SWITCHER: 4 SOURCES TO 4 DISPLAYS
The HD44C High Definition Component Video Matrix Switcher allows high definition 1080i video and digital audio to be sent
over standard coax with virtually no loss in signal quality.
Features
• Four-Source, Four-Zone High Definition
matrix video switcher with SD video capability
• Buffered component video loop-through and
serial port expansion capability allow
expansion up to 16 zones of total distribution.
• Component video inputs and S/PDIF digital
audio inputs for each source component
• 4 Coaxial Component video + S/PDIF digital audio
outputs for each zone for distribution up to 250 feet
• Controllable through IR (RC68X) and RS232
commands
• Bandwidth supports resolutions of 1080i,
720p, 480p and 480i
HD Video Distribution
The HD44CC5 High Definition Component Video Matrix Switcher allows high definition 1080i video and digital audio to be
sent up to 1000 feet over CAT5 cable with virtually no loss in signal quality.
General Info
• Optional rack mount kit RM2UKIT
• Weight: 9.25 lbs
• Dimensions: 17”W x 7.375”D x 3.93”H
• Power: 120VAC, 0.25A
• Remote Included (Contains lithium battery)
• Also available in 230 VAC
Order: HD44C
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
25
8X8 HD SWITCHER: 8 SOURCES TO 8 DISPLAYS with CAT5
HD Video Distribution
The HD88CC5 High Definition Component Video Matrix Switcher allows high definition 1080i video and digital audio to be
sent up to 1000 feet over CAT5 cable with virtually no loss in signal quality.
Features
• Eight-Source, Eight-Zone High Definition
matrix video switcher with SD video capability
• Buffered component video loop-through and
serial port expansion capability allow
expansion up to 32 zones of total distribution.
• Component video inputs and S/PDIF digital
audio inputs for each source component
• 8 Coaxial Component video + S/PDIF digital audio
outputs for each zone for distribution up to 250 feet
• Eight RJ45 outputs for HD video and digital
audio distribution up to 1000 feet over CAT5
• Coaxial component video output and RJ45
output active simultaneously
• Controllable through IR (RC68X) and RS232
commands
• Bandwidth supports resolutions of 1080i,
720p, 480p and 480i
8X8 HD SWITCHER: 8 SOURCES TO 8 DISPLAYS
The HD88C High Definition Component Video Matrix Switcher allows high definition 1080i video and digital audio to be sent
over standard coax with virtually no loss in signal quality.
Features
• Eight-Source, Eight-Zone High Definition
matrix video switcher with SD video capability
• Buffered component video loop-through and
serial port expansion capability allow
expansion up to 32 zones of total distribution.
• Component video inputs and S/PDIF digital
audio inputs for each source component
• 8 Coaxial Component video + S/PDIF digital audio
outputs for each zone for distribution up to 250 feet
• Controllable through IR (RC68X) and RS232
commands
• Bandwidth supports resolutions of 1080i,
720p, 480p and 480i
26
General Info
• Power: 120VAC, 0.25A
• Optional rack mount kit RM3UKIT
• Weight: 9.25 lbs
• Dimensions: 17”W x 7.375”D x 5.71”H
• Power: 120VAC,025A
• Remote Included (Contains lithium battery)
• Also available in 230 VAC
Order: HD88CC5
General Info
• Optional rack mount kit RM3UKIT
• Weight: 9.25 lbs
• Dimensions: 17”W x 7.375”D x 5.71”H
• Power: 120VAC, 0.25A
• Remote Included (Contains lithium battery)
• Also available in 230 VAC
Order: HD88C
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
HD SINGLE GANG RECEIVER BOX
Receiver automatically compensates for wire run length as
well as cable quality for simple, foolproof installation
• Receiver for use with HD44CC5, HD88CC5
or HDTXSG01 transmitter
• Easily mounts in a single gang J-box
• Gold plated RCA connectors for video and
digital audio output
• Power supply: 8VAC @ 400mA (included)
HD Video Distribution
Order: HDRXSG01
HD SINGLE GANG TRANSMITTER BOX
Sends single HD or SD video source component and digital
audio output up to 1000 feet over CAT5 wire to a HDRXSG01
• Transmits HD or SD video, digital audio and
IR signal (IR requires separate wire run) to HDRXSG01
• Easily mounts in a single gang J-box
• Gold plated RCA connectors for video and
digital audio output
• Power supply: 8VAC @ 400mA (included)
Order: HDTXSG01
HD SINGLE GANG COAX BOX
HDCXSG01 COAX wall plate features:
Use for neat installation with coax component video
distribution
• Easily mounts in a single gang J-box Connectors:
• Face:Gold plated RCA
• Rear: Gold plated F-Type
Order: HDCXSG01
International Power Supply for HDRXSG01 and HDTXSG01
Order: 06500676
Order: 06500677
Order: 06500678
Australia/New Zealand (AUS/NZ)
Europe (EU)
United Kingdom (UK)
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
27
HD Video Distribution
POINT-TO-POINT COMPONENT AUDIO EXTENDER
28
Features
• Supports up to 1080p component video
• Supports analog Left & Right audio and digital
multi-channel TOSLink or S/PDIF audio
• No loss of quality
• Plug and play installation
• Equalizations for different CAT-5 skews
• Extends up to 330 feet
• Uses one CAT-5 cable for extension
General Info
• Component 6 foot cable (included)
• RCA Left & Right Audio Cable (included)
• (2) 100-240V Power Supplies: 5VDC, 5W
max. (included)
• Dimensions: 3”W x 3.75”D x 1”H
Order: COMPAUDEXT
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Features
• Drives up to six audio/video components from
a single A/V source
• Compatible with all HDTV signals (720p, 1080i, 1080p),
analog video and audio, and digital audio signals.
• Low A/V distortion for crisp sound and picture
• Gold-plated RCA-type jacks
• Supports component video (Y, Pb, Pr),
RGBHV, and composite video
• Supports analog Left & Right audio, digital audio – S/PDIF
• Active Expansion Output – Daisy chain and
maintain same great picture quality
• Allows up to 150 ft. runs
• “Flat Pack” design for ease of placement and mounting
General Info
• Power Supply: 9VAC @ 1A (included)
• Dimensions: 10.8”W x 1.4”D x 6.5”H
Order: HD16D
HD Video Distribution
1 IN 6 OUT COMPONENT VIDEO AND AUDIO DISTRIBUTION AMP
6-WAY A/V DISTRIBUTION AMPLIFIER
Features
• Drives up to six audio/video components from
a single A/V source
• Low A/V distortion for crisp sound and picture
• RCA-type jacks
• “Flat Pack” design for ease of placement and mounting
General Info
• Power Supply: 16VDC @ 300mA (included)
• Dimensions: 10”W x 2.75”D x 1.25”H
Order: AV61
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
29
IR REMOTE PREAMP
HD Video Distribution
Fully functional infrared remote controlled audio/video preamp. Volume, Bass, Treble, Balance and Mute functions, plus A/V
switching, provide all the functions needed for multi-room systems.
Features
• Four selectable discrete line level A/V inputs
to a single output
• Separate Volume (Up/Down), Balance
(Left/Right), Bass and Treble controls feature
continuous adjustment in ±2 dB steps
• IR input with IR confirm LED for use with
Xantech IR controlled systems
• Discrete IR codes for all functions
• The RP41AV is adjustable to different IR
control code groups using the RC68X,
allowing individual control of multiple
RP41AV’s in a system
• “Flat Pack” design for ease of placement
and mounting
General Info
• Power Supply: 15VAC @ 300mA (included)
• Requires an RC68X remote programmer and
any Xantech IR system such as a 291KITRP
• Dimensions: 10”W x 3”D x 1.375”H
Order: RP41AV
DIGITAL AUDIO COUPLERS
Xantech’s digital audio signal converter is an easy to install, clean approach to converting S/PDIF digital audio signals from
optical to coaxial format. Combine a CPLCT and CPLTCX couplers to provide a long distance end-to-end solution using lower
cost coaxial cable instead of optical cable.
Features
• Economically extend range of digital audio
output by converting from costly optical cable
to common coaxial cable
• Rack-mountable for easy installation
• Comes complete with power supply
Order: CPLTCX – Optical In, Coaxial Out
Order: CPLCT – Optical Out, Coaxial In
30
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
HDMI SECURE-LOCK CABLES
Features
• Secure-Lock – Compatible with all HDMI jacks
• Gold plated connectors – For improved contact quality
• Triple layer shielding – For premium HDTV quality
• Supports resolutions up to 1080p, 1080i,
720p, 720i, 480p, 480i
• HDMI™ 1.3 compatible
• HDCP compliant
• Retail Packaging
3-STEP INSTALLATION
1. Remove screw from equipment.
Order: HDMI06FTLCK, 6-Feet
Order: HDMI10FTLCK, 10-Feet
Order: HDMI15FTLCK, 15-Feet
2. Attach lock-down device to the equipment.
HD Video Distribution
Xantech’s HDMI Secure-Lock cables provide reliable and
secure connection to displays and source components.
Simply add a lock-down device and attach the HDMI cable.
A knurl knob connects the HDMI cable to the electronic
component for a secure fit.
Reduce service calls and eliminate accidental cable
disconnections with Xantech’s HDMI Secure-Lock cables.
3. Attach HDMI cable and Secure-Lock.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
31
50 FOOT SIGNAL BOOSTER HDMI CABLES
The Xantech HDMI Signal Booster cables are a copper cable based solution with an integrated HDMI Signal Booster. The
HDMI Signal Booster cables will offer the highest resolution possible and supports all resolutions up to 1080p. HDMI digital
audio is also supported by this cable and allows for the highest possible quality A/V experience with zero signal loss
Features
• Perfect 1080p digital video every time
• Extends HDMI displays away from the HDTV source
• Supports resolutions up to 1080p, 2k, and 1920 x 1200
• HDMI™ 1.3 compatible
• HDCP compliant
HD Video Distribution
Order: HDMIBOOST050FT
HDMI TO DVI ADAPTORS
Xantech offers a wide selection of HDMI to DVI adapters. All adaptors are metal shielded and come with DVI knobs and nuts
to ensure a high-quality connection.
HDMI FEMALE TO DVI FEMALE
Order: HDMIF2DVIF
HDMI FEMALE TO DVI MALE
Order: HDMIF2DVIM
HDMI MALE TO DVI FEMALE
Order: HDMIM2DVIF
ACCESSORIES
Xantech IR system adapter. Connects to “EXT-IR” port. Compatible with HDMI4X4, HDMI3X1, HDMI4X1 switchers. Monomini plug connects to emitter output port on a Xantech IR system. (built to order)
IR ‘eye’ extension. Connects to “EXT-IR” port. Compatible with HDMI4X4, HDMI3X1, HDMI4X1 switchers. Extends the IR
‘eye’ up to 6 feet. Allows switcher relocation.
HDMIEMITTER
Order: HDMIEMITTER
HDMIEXTIR
Order: 28EXT
32
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
UNIVERSAL DRAGON DROP-IR PROGRAMMING SOFTWARE
Speaks Dragon
Anywhere the Speaks Dragon Symbol appears in this Catalog, that indicates a product that is
programmable with Universal Dragon Drop-IR Programming Software.
Universal Dragon Programming Software is the heart of the Xantech control system.
This one program speaks to a variety of Xantech control products, such as SPLCD
LCD Touchpanels, MRC distribution systems, XTR39 remote control, and many more.
Universal Dragon includes many Default Projects featuring basic configurations
and programming to make system programming even more efficient.
Universal Dragon features an extensive, built-in Code Library that includes IR Commands for
most commonly used A/V components. For IR Commands not found in the Library, Universal Dragon easily learns
and stores IR Commands in Code Groups that become part of the Code Library. Xantech’s easy-to-use Palette Editor
System allows the entering and storage of RS232 ASCII and Hex commands, making programming RS232 as easy
as IR. Simply drag and drop the RS232 and/or IR commands from the library onto the virtual work space, creating
macros to control anything from the Home Theater to intricate Whole-House lighting and security systems.
With the aid of Xantech Universal Dragon Drop-IR™ Software a complete “Virtual” programming environment can be
created. Within the “Virtual” space, the programmer can create macros with single, sequenced and tiered IR commands.
All commands and macros can be easily tested within the “Virtual” space prior to downloading any macros onto the device.
System Projects can be saved and used for reference when troubleshooting or upgrading systems. System Projects can
also be copied and modified to customize a basic system package to a different clients’ needs without having to start from
scratch every time.
Speaks Dragon Compatible Products
Speaks Dragon Compatible Products
PRODUCT
PAGE
PRODUCT
PAGE
PM110
39
MRC88m
68
LM110
39
MRAUDIO8X8m
67
Speaks Dragon
EM110
39
MRC44CTL
66
WPK
42
MRAUDIO4X4CTL
65
XTR39
43
SPLCD64V
36
RS232IR
45
SPLCD64G
36
MAC1
46
SPLCD39G
36
590-10
46
1.5GHz Processor or Better
600MB* Hard drive space
(more recommended as projects expand)
Windows XP and Windows Vista
.NET Framework 2.0 (included)
512MB Ram (1GB Ram recommended)
Mouse, USB, RS232 port
• 600MB = 300MB Universal
300MB .Net Framework
Universal Dragon Minimum Requirements
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Universal Dragon Drop-IR
Download free http://www.xantech.com/Software
33
UNIVERSAL DRAGON DROP-IR DPKIT
The DPKIT is a convenient programming kit to get you the installer, up and running in as little time possible.
The heart of the programming kit is the PCIRUSB. This device interfaces with Universal Dragon Drop-IR software and allows
the capture and testing of IR commands. The PCIRUSB connects to the USB port of a computer and has Xantech’s Blast-IR
technology allowing quick testing of learned IR commands. The PCIRUSB is required to program the SmartPad3
(LM110, PM110) and WaterPads
The DPTBOX Programming Tool Box provides all of the tools necessary for programming
Universal Dragon compatible products.
Universal Dragon Drop-IR
DRAGON DROP-IR PROGRAMMING KIT
(1) PCIR1 Programming Module
(1) USB Serial Cable (06500781)
(1) 3-Pin, DB9F Programming Cable (05913778) – 6 feet
(1) 3.5mm Plug-To-Stripped End Cable (06015900) – 5 feet
(1) RS232 Programming Cable, DB9MF (06500616) – 6 feet
(1) DB9MF Null Modem Adapter
(1) Expansion Cable, MRC44, MRAUDIO4X4, BXAUDIO4X4 – (05913560) 2 feet
(1) WaterPad Programming Adapter (05913460-01)
(1) Universal Dragon Drop-IR CD-ROM (03501085-01)
(1) 781ERGPS Power Supply
Order: DPKIT
UPC#:4277731380
DRAGON DROP-IR PROGRAMMING TOOL BOX
(1) All the Contents of the DPKIT Plus
(1) RC68X Programmer
(1) 291-10 Desktop IR Receiver
(1) CB12 Connecting Block
(5) 283M Blink-IR Mouse Emitter
(1) Screwdriver Set – 2 piece
(1) Wire Strippers and Cutter
(1) SUNKIT – Sun Filter Kit For IR Receivers
(1) MS1 Mouse Emitter Shield
(1) MW1B, MW1S Mouse Emitter Wire Dressing
(1) Xantech Soft-Style Briefcase
Order: DPTBOX
UPC#:4277731512
With the PCIR1 and Universal Dragon Drop-IR software, you can learn, program, and test complex IR commands
into several Xantech devices. Refer to the list below to determine which Xantech products require the PCIRUSB \
DPKIT \ DPTBOX.
PCIR1 REQUIRED
PRODUCT
PAGE
LM110
39
WPK
42
RS232IR
45
MAC1
46
590-10
46
34
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
FEATURE
SPLCD64V
SPLCD64G
SPLCD39G
Stand-Alone Home
Theater Controller
Yes
Yes
Yes
Screen Size
6.4” diagonal
6.4” diagonal
3.9” diagonal
Screen Resolution:
640 x 480 pixels
640 x 480 pixels
320 x 240 pixels
Screen Colors:
64K
64K
256
Video Supported:
NTSC, PAL, SECAM
n/a
n/a
IR Bus / IR Receiver:
Yes
Yes
Yes
Power
Requirements:
16VDC, 750mA
16VDC, 750mA
16VDC, 500mA
RS422 Requires
RS422232 Controller
Yes
Yes
Yes
GPIO Event Trigger
Yes
Yes
Yes
Text Feedback Support
From MRC88m,
MRAUDIO8X8m,
XT1
XIS100
From MRC88m,
MRAUDIO8X8m,
XT1
XIS100
From MRC88m,
MRAUDIO8X8m,
XT1
XIS100
Video
PIP/ Full Screen
Yes
No
No
MRC44CTL,MRAUDIO4X4
MRC44CTL,MRAUDIO4X4
MRC44CTL,MRAUDIO4X4
RS232 Control Port:
System
Capability
Volume Level
Feedback
MRC88m,MRAUDIO8X8m
Dimensions:
5.66”H x 7.76”W x 1.77”D
5.66”H x 7.76”W x 1.77”D
3.53”H x 4.68”W x 1.52”D
Cut Out Dimensions
Order Template,
p/n 08187157
Order Template,
p/n 08187157
Order Template,
p/n 08187158
Weight
2.9 lbs. (1.32 kg)
2.9 lbs. (1.32 kg)
1.10lbs (.5 kg)
Included Accessories:
White Bezel
Back Box
Cutout Template
Universal Dragon
Drop-IR Software
White Bezel
Back Box
Cutout Template
Universal Dragon
Drop-IR Software
White Bezel
Back Box
Cutout Template
Universal Dragon
Drop-IR Software
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
SPLCD Touchpanel Controllers
SPLCD TECHNICAL SPECIFICATIONS COMPARISON MATRIX
35
SPLCD TOUCHPANNEL CONTROLLERS
SPLCD Touchpanel Controllers
6.4” SMARTPAD LCD VIDEO TOUCHPANEL
The SPLCD64V combines video display with the convenience and
simple operation of a self-contained touchpanel controller. Its
640 x 480 resolution, with 64K color, provides outstanding
graphics and a remarkable video image, which may be
displayed full screen, or as picture-in-picture.
• Touchpanel controller with video display
• Fully customizable display graphics
• Video image may be displayed full-screen, or PiP mode
• Stand-alone device can output IR and/or RS232 commands
• Internal pre-programmed IR code library,
as well as capability to learn IR commands
• Built-in IR receiver
• SPLCDPS1 Power Supply required (p38)
• Front panel IR learning eye
• Integrated Macronizer executes long macros without errors
Order: SPLCD64VW
UPC#: 4277731265
6.4” SMARTPAD LCD GRAPHIC TOUCHPANEL
•
•
•
•
•
•
•
•
•
Stand-alone device can output IR and/or RS232 commands
Fully customizable display graphics
XT1 Station feedback, and XMUSIC song title navigation
Internal pre-programmed IR code library, as well as capability
to learn IR commands
Built-in IR code library
Built-in IR receiver
SPLCDPS1 Power Supply required (p38)
Front panel IR learning eye
Fully compatible with the MRC88m/MRAUDIO8X8m Controllers
with bi-directional status indication
Order: SPLCD64GW
UPC#: 4277731243
Speaks Dragon
3.9” SMARTPAD LCD GRAPHIC TOUCHPANEL
•
•
•
•
•
•
•
•
•
Stand-alone device can output IR and/or RS232 commands
Fully customizable display graphics
XT1 Station feedback, and XMUSIC song title navigation
Internal pre-programmed IR code library, as well as capability
to learn IR commands
Built-in IR code library
Built-in IR receiver
SPLCDPS1 Power Supply required (p38)
Front panel IR learning eye
Fully compatible with the MRC88m/MRAUDIO8X8m Controllers
with bi-directional status indication
Order: SPLCD39GW
36
Speaks Dragon
UPC#: 4277731216
Speaks Dragon
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
SPLCD TOUCHPANNEL CONTROLLERS ACCESSORIES
COLOR BEZELS FOR SPLCD TOUCHPANEL CONTROLLERS
3.9” Almond Order: SPLCD39BZA
UPC#: 4277731198
3.9” Black Order: SPLCD39BZBK
UPC#: 4277731199
3.9” Brown Order: SPLCD39BZBN
UPC#: 4277731207
3.9” Ivory Order: SPLCD39BZI
UPC#: 4277731210
3.9” Polished Chrome Order: SPLCD39BZPC
UPC#: 4277731212
3.9” Satin Brass Order: SPLCD39BZSBR
UPC#: 4277731295
3.9” White Order: SPLCD39BZW
UPC#: 4277731215
6.4” Almond Order: SPLCD64BZA
UPC#: 4277731229
6.4” Black Order: SPLCD64BZBK
UPC#: 4277731231
6.4” Brown Order: SPLCD64BZBN
UPC#: 4277731232
6.4” Ivory Order: SPLCD64BZI
UPC#: 4277731236
6.4” Satin Brass Order: SPLCD64BZSBR
UPC#: 4277731297
6.4” Satin Chrome Order: SPLCD64BZSC
UPC#: 4277731241
6.4” White Order: SPLCD64BZW
UPC#: 4277731242
BACK BOX FOR SPLCD TOUCHPANELS
• For applications requiring enclosed box:
• Included with SmartPad LCD™ Controllers.
• Available separately for prewire applications
3.9” SPLCD Box Order: SPLCD39BOX UPC#: 4277731245
SPLCD Touchpanel Controllers
• Available in 3.9” and 6.4”
• Available in White, Black, Ivory, Almond, Brown, Brass, Satin Brass, Satin Chrome, and Polished Chrome
• White Bezel included with SPLCD SmartPad LCD™ Controllers
6.4” SPLCD Box Order: SPLCD64BOX UPC#: 4277731247
Dimensions:
• SPLCD39BOX 3.9”- 3.92”H x 4.92”W x 3.27”D
• SPLCD64BOX 6.4”- 6.05”H x 7.91”W x 3.51”D
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
37
SPLCD TOUCHPANNEL CONTROLLERS ACCESSORIES
RACK MOUNT FOR SPLCD39
For applications requiring 19” rack mounting of SPLCD39
Order: CSPLCD39RMP
UPC#: 4277731439
RACK MOUNT FOR SPLCD64
For applications requiring 19” rack mounting of SPLCD64
UPC#: 4277731438
Order: CSPLCD64RMP
SPLCD Touchpanel Controllers
DESKTOP MOUNT FOR SPLCD39
For applications requiring desktop mounting of SPLCD39
Order White: DTMLCD39W
UPC#: 4277731521
Order Black: DTMLCD39B
UPC#: 4277731520
DESKTOP MOUNT FOR SPLCD64
For applications requiring desktop mounting of SPLCD64
Order White: DTMLCD64W
UPC#: 4277731523
Order Black: DTMLCD64B
UPC#: 4277731522
SMARTPAD LCD CONNECTING BLOCK
• Allows integration of SPLCD SmartPad LCD™
Controllers into an existing IR network
• 12 VDC Regulated output for standard Xantech IR Receivers
• 16 VDC output for SPLCD Touchpanel Controllers
• 10 amplified IR emitter ports
• Requires SPLCDPS1 or SPLCDPS4 Power Supply
Order: SPLCDCB100
UPC#: 4277731271
SMARTPAD LCD POWER SUPPLY
• Steady, regulated, 16V DC, 800 mA power supply for a single SPLCD Touchpanel Controllers
• Available in 120VAC-60 Hz or 240VAC-50 Hz
Order: SPLCDPS1
UPC#: 4277731459
HIGH CURRENT SMARTPAD LCD POWER SUPPLY
• Steady, regulated, 16V DC, 3.12A power supply for multiple Touchpanel Controllers
• Available in 120VAC-60 Hz or 240VAC-50 Hz
• Powers up to four SPLCD SmartPad LCD™ Controllers
Order: SPLCDPS4
UPC#: 4277731290
RS422 TO RS232 MODULE
•
•
•
•
38
Connects to the Serial I/O port on SPLCD Controllers
Converts RS422 from SPLCD to RS232 output to control a RS232 device
Converts RS232 from a control device to RS422 to control a SPLCD
Allows control from up to 4000 feet away via CAT5 cable
Order: RS422232
UPC#: 4277731244
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
NEW SMARTPAD3 IN-WALL KEYPAD KITS
SMARTPAD3 DUAL GANG PROGRAMMABLE MODULE KIT
Complete in-wall keypad kit includes
• (1) PM110 Dual Gang SmartPad3 Programmable Module
• (1) MMD6 Keypad with six source selection keys,
six function keys and one rocker volume control key.
• (1) MMD Black Bezel (1) MMD Almond Bezel (1) MMD Ivory Bezel
• (1) CMD1 Keypad module with six function control keys, four cursor
navigation keys and one selection key
• (1) CMD Black Bezel (1) CMD Almond Bezel (1) CMD Ivory Bezel
Order: PM110KITRP
UPC#: 4277731504
Speaks Dragon
Complete in-wall keypad kit includes
• (1) LM110 Single Gang SmartPad3 Learning Module
• (1) MMD4 Keypad with four source selection keys,
six function keys and one rocker volume control key.
• (1) MMD Black Bezel (1) MMD Almond Bezel (1) MMD Ivory Bezel
Order: LM110KITRP
Speaks Dragon
UPC#: 4277731505
SMARTPAD3 SINGLE GANG EXPANSION MODULE KIT
SmartPad3 Single Gang Expansion Module for use with PM110
Includes:
• (1) EM110 SmartPad3 Single Gang Expansion Module
• (1) KMD1 Keypad with four source selection keys
Order: EM110KITRP
UPC#: 4277731506
IN-WALL KEYPADS AND DESIGNER SERIES KEY MODULES
SMARTPAD3 DUAL GANG PROGRAMMABLE MODULE
Keypads and Remotes
SMARTPAD3 SINGLE GANG LEARNING MODULE KIT
Dual Gang Programmable Module (with 32 kbytes E2PROM) can be programmed
manually to execute single commands, sequences and delays. Capable of manual
programming, IR Learning and Cloning or can be programmed with Universal Dragon
Software. Non-volatile memory allows programming either before or after installation.
Speaks Dragon
Order: PM110RP
UPC#: 4277731116
SMARTPAD3 SINGLE GANG LEARNING MODULE
Single Gang Learning Module receives its program from a
PM110 Programmable Module or Universal Dragon.
The LM110 can be programmed using a PM110 or Universal Dragon
Software to execute single commands, sequences and delays.
Non-volatile memory allows programming either before or after installation.
Order: LM110RP
Speaks Dragon
UPC#: 4277731115
SMARTPAD3 SINGLE GANG EXPANSION MODULE
SmartPad3 Single Gang Expansion Module - Requires PM110
Order: EM110RP
UPC#: 4277731118
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
39
IN-WALL KEYPADS AND DESIGNER SERIES KEY MODULES
DESIGNER SERIES CURSOR MODULE
Xantech Designer Series Cursor Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with six function control keys,
four cursor navigation keys and one selection key
• Includes 700+ Button labels
UPC#: 4277731405
Order: CMD1W
Keypads and Remotes
FOUR SOURCE DESIGNER SERIES CURSOR MODULE
Xantech Designer Series Cursor Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with four backlit source selection keys, two function control keys,
four cursor navigation keys and one selection key
• Includes 700+ Button labels
Order: CMD4W
UPC#: 4277731406
SIX SOURCE DESIGNER SERIES CURSOR MODULE
Xantech Designer Series Cursor Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with six backlit source selection keys, four cursor navigation
keys and one selection key.
• Includes 700+ Button labels
Order: CMD6W
UPC#: 4277731407
DESIGNER SERIES CURSOR MODULE COLOR BEZEL KIT
Color replacement bezels for use with Xantech Designer Cursor Modules*.
Package Includes:
• (1) Cursor Module Black Bezel (1) Cursor Module Ivory Bezel (1) Cursor Module Almond Bezel
Order: CMDBZKIT
UPC#: 4277731493
DESIGNER SERIES KEY MODULE
Xantech Designer Series Key Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Key
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with twelve function keys.
• Includes 700+ Button labels
Order: KMD1W
UPC#: 4277731400
DESIGNER SERIES KEY MODULE COLOR BEZEL KIT
Color replacement bezels for use with the Xantech Designer Key Module*.
Package Includes:
• (1) Key Module Black Bezel (1) Key Module Ivory Bezel (1) Key Module Almond Bezel
Order: KMDBZKIT
UPC#: 4277731495
*sold separately
40
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
IN-WALL KEYPADS AND DESIGNER SERIES KEY MODULES
DESIGNER SERIES MASTER MODULE
Xantech Designer Series Master Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with ten function keys and one rocker volume control key.
• Includes 800+ Button labels
Order: MMD1W
UPC#: 4277731445
Xantech Designer Series Master Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with two backlit source selection keys, eight function keys and one rocker volume control key.
• Includes 800+ Button labels
Order: MMD2W
UPC#: 4277731446
FOUR SOURCE DESIGNER SERIES MASTER MODULE
Xantech Designer Series Master Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with four backlit source selection keys, six function keys and one rocker volume control key.
• Includes 800+ Button labels
Order: MMD4W
UPC#: 4277731447
SIX SOURCE DESIGNER SERIES MASTER MODULE
Xantech Designer Series Master Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with six backlit source selection keys, four function keys and one rocker volume control key
• Includes 800+ Button labels
Order: MMD6W
UPC#: 4277731448
Keypads and Remotes
TWO SOURCE DESIGNER SERIES MASTER MODULE
EIGHT SOURCE DESIGNER SERIES MASTER MODULE
Xantech Designer Series Master Modules allow custom button configuration to match any
customer’s needs. These modules are compatible with the Xantech SmartPad3 PM110, LM110
and EM110 Modules* for single, double or triple gang keypad configurations. The Cursor
Modules are also compatible with standard decorator-style wall cover plates*.
• Keypad module with eight backlit source selection keys, two function keys and one rocker volume control key.
• Includes 800+ Button labels
Order: MMD8W
UPC#: 4277731449
DESIGNER SERIES MASTER MODULE COLOR BEZEL KIT
Color replacement bezels for use with Xantech Designer Master Modules*.
Package Includes:
• (1) Master Module Black Bezel (1) Master Module Ivory Bezel (1) Master Module Almond Bezel
Order: MMDBZKIT
UPC#: 4277731494
*sold separately
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
41
KEYPADS AND REMOTE CONTROLS
SMARTPAD3 DESKTOP MOUNT
Desktop mount for the SmartPad3 keypad system
Conveniently place the SmartPad3 keypad system on a desktop, countertop or coffee table
Each desktop mount includes a single and dual gang faceplate
Order White: DTMSP3W
UPC#: 4277731524
Order Black: DTMSP3B
UPC#: 4277731525
Keypads and Remotes
WATERPAD - Waterproof Programmable Keypad
Completely submersible waterproof keypad. Designed and engineered to be
used in bathrooms, showers, outdoor areas, or poolside. Every WPK comes
with over 125 icon labels, allowing the installer to customize each keypad
for their individual client. Use the Universal Dragon Drop-IR™ software for
custom programming as you would for a PM110 or LM110.
Speaks Dragon
WATERPAD WITH 20 FUNCTION BUTTONS
Order: WPK1
UPC#: 4277731004
WATERPAD WITH FOUR BANK AND 16 FUNCTION BUTTONS
Order: WPK4
UPC#: 4277731005
WATERPAD WITH SIX BANK AND 14 FUNCTION BUTTONS
Order: WPK6
UPC#: 4277731006
WATERPAD WITH EIGHT BANK AND 12 FUNCTION BUTTONS
Order: WPK8
UPC#: 4277731007
HAND-HELD WIRELESS REMOTES
URC-2 PROGRAMMABLE HAND-HELD CONTROLLER
The URC-2’s combination of power, versatility, and ease of use has made it one of the
most recognized remote controls on the market. With a new keypad layout, the
URC-2 is now even easier to use and program. With the ability to embed macros
Speaks Dragon
under every button, the URC can perform complex tasks very simply.
• All buttons can be programmed for individual commands or complete macros for single touch automation
• Tier 2 push/hold Button Function (program 2 different macros under a single button)
• Eight source select and 40 basic function buttons
• Programmable manually or with Universal Dragon Drop-IR™ software
• Built in IR learning eye for creating an IR code library
Black Remote Order: URC2B
UPC#: 4277731452
Platinum Remote Order: URC2P
UPC#: 4277731157
PLATINUM ORDER HAND HELD LEARNING REMOTE RETAIL PACKAGE
• Retail pack includes URC2P (platinum), and programming cable
UPC#: 4277731158
Order: URC2PRP
42
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
IN-WALL KEYPADS AND REMOTE CONTROLS
HAND-HELD LCD TOUCHSCREEN REMOTE
Speaks Dragon
RF BASE STATION FOR XTR39
The RF2IR* Base Station is the ultimate accessory to the Xantech XTR39 Color LCD Remote Control. It’s a receiver that
accepts the Radio Frequency output of the XTR39 remote and translates it into IR and RS232 command signals that can
control virtually any home electronic device. The RF2IR makes it simple to set up a reliable and sophisticated multi-room
control system that is easily controlled by the intuitive LCD touchscreen control of the XTR39 remote.
• Control your components up to 100 feet away** even through walls!
• Plasma, LCD, and Sunlight proof operation
• RF signal based on the dependable IEEE 802.15.4 standard
• 16 selectable sub-channels ensure interference-free operation
• Single XTR39 can control up to 256 RF2IR base stations for
virtually limitless control possibilities
• Four routable IR outputs make it simple to control the source
components of virtually any home entertainment system
• RS232 output makes it possible to control display devices, lighting
controls and more with discrete command codes for performance
• Selectable front panel IR ‘Blaster’
Speaks Dragon
• Comes complete with (1) Power Supply (4) 283M IR Emitters (1) RS232 Cable
Order: RF2IR
UPC#: 4277731414
Keypads and Remotes
The XTR39 is a stylish, simple-to-use remote control that can
be personalized via its vivid full color 3.9” touchscreen display.
Button layout can be customized with easily identified icons created for
virtually any function or command and multiple screen pages
allow less frequently used buttons to be concealed.
• Vivid 3.9” Color LCD touchscreen display
• Fully customizable screen graphics and functions
• Capable of controlling virtually any major brand home system
• Hard buttons for frequently used commands
• Four easy access programmable macro buttons
• Comes complete with power supply an charging cradle.
Order: XTR39
UPC#: 4277731420
REPLACEMENT BASE STATION AND POWER SUPPLY FOR XTR39
Order: XTR39CRDL
UPC#: 4277731378
REPLACEMENT BATTERY FOR XTR39
Order: XTR39BTRY
UPC#: 4277731379
*RF2IR and XTR39 are sold separately
**Depending on local conditions, range may vary
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
43
CONTROLLERS AND SWITCHERS
REMOTE SPEAKER SWITCHER
The 686-10 allows switching six pairs of speakers ON and OFF using RC68X IR
commands. Allows local or global command of speaker control.
• 200 watts per channel capacity
• Switchable 4-Ohm series resistor for amplifier protection
• Isolated Left and Right Grounds. Allows use of bridging type power amplifiers
• Four-terminal IR input for Xantech IR receivers, LCD Touchscreen Controllers, SmartPads and other devices
• Requires the 782ERGPS Power Supply
Order: 68610
UPC#: 4277768610
Controllers and Switchers
REMOTE AC SWITCHER
The 680-10 is an IR Remote Controlled AC Switcher with six
AC outlet receptacles. It responds to RC68X IR commands via
its IR input port. Each outlet is switched
ON or OFF by a high current electro-mechanical relay for
higher reliability than solid state switching methods.
Order: 68010
UPC#: 4277730047
REMOTE GAIN CONTROL MODULE
•
•
•
•
•
•
•
Remote controlled line level gain control
Ramping volume and/or preset level adjustments
Separate mute on and off
Loop-through jacks for ‘daisy chaining’ multiple RGC11’s
Requires RC68X Programmer
Useful for controlling multiple power amplifiers from a single preamp
Power Supply 15VAC @ 400mA (included)
Order: RGC11
UPC#: 4277730041
CONTROLLED AC OUTLET
The AC1 is a control voltage switched outlet. It can be used for AC power management
with the control output of any low voltage DC source (5-30VDC).
Order: AC1
UPC#: 4277731036
IR / VOLTAGE CONTROLLED AC OUTLET
The AC2 is an IR or voltage controlled switched AC outlet. It can
be used for AC power management with the control output of any
low voltage source (5-30VDC or AC), or a composite video signal.
Order: AC2
UPC#: 4277731048
REMOTE RELAY MODULE
•
•
•
•
•
•
Provides “dry contact” closures for plasma lifts, screen drops, drapes etc.
One double pole, double throw relay, 5 amp/30VDC rated
Four contacts available: two normally open, two normally closed
IR input terminals
IR code select switch
Requires 781ERGPS power supply and RC68X Programmer
Order: CC12
UPC#: 4277730094
REMOTE RELAY SWITCHER
•
•
•
•
44
Six double-pole double-throw relays, 5 amps, 30 VDC rated
Two normally open and 2 normally closed contacts per relay
Six six-terminal screw-type plug-in connectors
Requires 782ERGPS power supply and RC68X Programmer
Order: CC62
UPC#: 4277731034
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
CONTROLLERS AND SWITCHERS
LIGHTING MODULE
• Converts RC68X IR codes to X-10 commands
• Requires Universal Dragon Drop-IR™software for programming
• 64 presets per module
• Four scenes per module
• Adjusts temperature (preset or variable) when used
with an X-10 compatible thermostat (not included).
• Requires 781ERGPS Power Supply and RC68X IR Programmer
Order:IRX10
UPC#: 4277731144
The RS2321X8 Serial Router allows the single serial output of a Xantech
SPLCD Touchpanel or other RS232 controller to be expanded to control
eight different serial devices, or up to sixteen devices when used with the MRC88CTL.
• Requires 781ERGPS Power Supply
Order: RS2321X8
UPC#: 4277731283
IR TO RS232 MODULE
Easily add serial control capability to an IR system to control advanced components
such as projectors and lighting systems. Allows the installer to economically
upgrade an existing Xantech IR control system.
• Requires 781ERGPS Power Supply
Order: IRS232A
UPC#: 4277731189
Speaks Dragon
RS232 TO IR MODULE
RS232IR Module allows advanced control systems such as lighting systems
and automation systems to send user-programmable IR commands
when triggered by pre-defined Xantech ASCII commands.
• Requires 781ERGPS Power Supply
Order: RS232IR
UPC#: 4277731168
Speaks Dragon
Controllers and Switchers
1X8 ADDRESSABLE SERIAL ROUTER
RS232 EXPANSION MODULE
•
•
•
•
•
•
•
RS232 Serial Port Extender/ Hub
Four port RS232 Port Extender/Hub for RS-232 data signals
Data received from any of the RS232 ports is sent to the other three
Can be used to monitor several RS232 controlled machines via one PC port
Can be used as a hub to link together multiple serial devices
Controls a single matrix switcher or other product via several computers and/or controllers
Power Supply (included)
Order: XOVP14
UPC#:9001490
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
45
CONTROLLERS AND SWITCHERS
MINI-MACRONIZER™
MAC1 has the ability to send single IR Commands or IR Sequences
when triggered by a single RC68X command.
• Requires Universal Dragon Drop-IR™ for programming
• Eliminates the problem of lost commands from hand held universal remotes
• Cuts down network traffic
• Requires 781ERGPS Power Supply and RC68X IR Programmer
Order: MAC1
UPC#: 4277731181
Speaks Dragon
Controllers and Switchers
PROGRAMMABLE CONTROLLER
The 590-10 gives the custom installer the ability to use any push button or contact
closure to initiate infrared commands. The 590-10 incorporates 16 isolated input
circuits and a learning microprocessor. There are 16 pairs of screw terminals on
its rear panel for us with up to 16 individual contact closures.
• Programmable with Universal Dragon Drop-IR™ Programming Software
• Multi-function sequencing for up to 40 commands per
key, button, or contact closure of any type
• Requires 782ERGPS Power Supply
Order: 59010
UPC#: 4277731159
Speaks Dragon
KEYPAD FOR 590
•
•
•
•
•
Eight-button keypad
Fits in single-gang box
Requires nine-conductor cable
Includes legend cutout sheet
Depth: 0.75” (19mm)
Order: 059800
UPC#: 4277759800
PULSED SWITCHING MODULE
• The 599 is used in conjunction with the 59010 Programmable Controller
• Provides a momentary 12 volt DC pulse output when a steady 5 to 12
volt DC input is applied
• By plugging a 12VDC power supply into a switched AC outlet on the
back of an AM/FM receiver, a low voltage, switched DC signal is made
available to the 59010. This could be used to trigger a power-on command
for a common source component.
• Power is supplied from the 59010
Order: 059900
UPC#: 4277759900
CURRENT SENSOR CONNECTING BLOCK
• Allows the CSM1 Current Sensor to be used as a general purpose
current sensor (independent of the MRC88m)
• For use with CSM1 and Sensor Modules
Order: CBCSM1
UPC#: 4277731190
46
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
SENSOR MODULES
AUDIO SENSOR MODULE
•
•
•
•
•
Provides status feedback by monitoring line-level audio connection
Sensor head placed inline to the line level audio output of the sensed device.
0-15 second adjustable delay
Adjustable sensitivity
For use with MRC platform, ISM4 and CBCSM1 connecting block
Order: SMAUD01
UPC#: 4277731364
•
•
•
•
•
Provides status feedback by monitoring composite video connection
Sensor head placed inline to the composite video output of the sensed device.
0-15 second adjustable delay
Adjustable sensitivity
For use with MRC platform, ISM4 and CBCSM1 connecting block
Order: SMVID01
UPC#: 4277731365
MAGNETIC SENSOR MODULE
• Provides status feedback by monitoring AC current
In power cords: Sensor head placed around power cord (no stripping necessary)
Sensor head insert allows monitoring of various sized cords
From CRT monitors: Sensor head placed near AC magnetic field
From AC electric motors: Sensor head placed near AC magnetic field
• 0-15 second adjustable delay
• Adjustable sensitivity
• For use with MRC platform, ISM4 and CBCSM1 connecting block
Order: SMMAG01
UPC#: 4277731366
LED AND LIGHT SENSOR MODULE
•
•
•
•
•
•
•
Provides status feedback by monitoring light illumination
Sensor head can be placed on top of equipment light or LED
Sensor module can also detect sunlight and room illumination
Colored filters included that allow specific colored lights of LEDs to be detected
0-15 second adjustable delay
Adjustable sensitivity
For use with MRC platform, ISM4 and CBCSM1 connecting block
Order: SMLIT01
UPC#: 4277731367
Controllers and Switchers
VIDEO SENSOR MODULE
CONTACT CLOSURE SENSOR MODULE
•
•
•
•
•
Contact Closure Sensor Module
Detects dry switch/relay closure
Wired directly to dry switch or relay
0-15 second adjustable delay
For use with MRC platform, ISM4 and CBCSM1 connecting block
Order: SMCC01
UPC#: 4277731369
AC/DC VOLTAGE SENSOR MODULE
•
•
•
•
Detects AC or DC voltage between 9 and 24 volts
Example: Doorbell can be used to mute an audio system when the doorbell rings
0-15 second adjustable delay
For use with MRC platform, ISM4 and CBCSM1 connecting block
Order: SMVLT01
UPC#: 4277731368
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
47
SENSOR MODULES
SYSTEM CONTROLLER
Controllers and Switchers
The ISM4 eliminates the need for Multiple remote, Just simply walk up and press the power button
• Automatic Status control up to 4 sources
• 4 sensor inputs
• 4 IR ports
• Bidirectional RS232 Port for Status
• Get on/off RS232 feedback from non RS232 devices
• Can be use with all Xantech Sensor modules
• IR Pass Through
• XPS Programming Feature Eliminates the Need for programming with a PC
• Cloning Feature allows installer to copy programming from one unit to another
• Comes with (1) video sensor & Power supply
Order : ISM4
48
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Speakers
SPEAKERS
Xantech introduces loudspeakers designed to the same high standards as our multi-zone distribution
systems. Speakers designed to deliver the ultimate in value and performance with perfected sound
quality to please the most discriminating listener. Three different driver sizes and a variety of configurations
make it easy to match the right Xantech speaker to virtually any job. The popular 6.5" speaker size is
available as an in-wall, in-ceiling, and stereo in-ceiling model. Xantech offers three high-value lines: the
XC Conventional Series, the XTC Series featuring Xantech Tonal Control technology as well as the premium
XTC Reference line.
Xantech loudspeakers are the result of Xantech’s commitment to build the best speakers possible. In
their quest for perfection, Xantech engineers examined every aspect of their performance and design,
from electronic components to structural materials, even how they interact with the home environment.
The result: flawless performance that you never thought possible from an installed speaker.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
49
XC SPEAKERS
Speakers
6.5” XC CEILING SPEAKER PAIR
General Features:
Stiff, light, mineral filled polypropylene
woofer cones. Improved smoothness
and frequency extension. Aluminum
woofer voice coils allows for increased
power handling and long term
reliability. A rubber half-roll surround
dampens the cone also for long term
reliability.
Pivotable Silk dome tweeter. Wide
dispersion design and Ferro-fluid
cooled for long term listening pleasure.
Capable of reproducing sounds in the
extended frequency range.
Custom-voiced crossover network
assures that all the components of the
speaker system blend to create the
best possible acoustic experience.
XC65C Specifications:
• Driver size: 6.5” Woofer / 19mm Tweeter
• Recommend Amplifier Power: 10-50 Watts
• Frequency Response: 55Hz-20kHz
• Impedance: 8-Ohm
• Sensitivity (1Watt/1Meter): 88dB
• Overall Dimensions: 9.25” DIA. x 4.25” Depth
(235mm x 108mm)
• Cut-Out Size: 8.05” DIA. (204mm)
Order: XC65C
UPC#:4277731382
6.5” XC IN-WALL SPEAKER PAIR
XC65W Specifications:
• Driver size: 6.5” Woofer / 19mm Tweeter
• Recommend Amplifier Power: 10-50 Watts
• Frequency Response: 55Hz-20kHz
• Impedance: 8-Ohm
• Sensitivity (1Watt/1Meter): 88dB
• Overall Dimensions: 8.75” W x 12.25” H x 3.5” Depth
(222mm x 311mm x 89mm)
• Cut-Out Size: 7.28” W x 10.70” H (185mm x 272mm)
Order: XC65W
UPC#:4277731383
6.5” XC STEREO CEILING SPEAKER EACH
Easy-lock tabs for simple installation
Spring clips
Paintable grill and frame
Limited Lifetime Warranty
XC65CS Specifications:
• Driver size: 6.5” Dual Coil Woofer
Twin 25mm Tweeters
• Recommend Amplifier Power: 10-50 Watts
• Frequency Response: 55Hz-20kHz
• Impedance: 8-Ohm
• Sensitivity (1Watt/1Meter): 89dB
• Overall Dimensions: 9.25” DIA. x 4.25” Depth (235mm x 108mm)
• Cut-Out Size: 8.05” DIA. (204mm)
Order: XC65CS
UPC#:4277731384
8” XC CEILING SPEAKER PAIR
XC8C Specifications:
Specifications:
• Driver Size: 8” Woofer / 22mm Tweeter
• Recommended Amplifier Power: 10-75 Watts
• Frequency Response: 42Hz-20kHz
• Impedance: 8-Ohm
• Sensitivity (1Watt/1Meter): 88dB
• Overall Dimensions: 10.98” DIA. x 4.01” Depth (279mm x 102mm)
• Cut-Out Size: 9.40” DIA. (238mm)
Order:XC8C
UPC: 42777315284
50
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
XTC CEILING SPEAKERS
General Features:
Pivotable Teteron dome tweeter
constructed with advance neodymium
magnet, fluid cooled, and rear acoustic
damping
Durable IMG (injection molded
graphite) woofer for higher sensitivity
and increased sound pressure levels
Solid-density SoundPATH™ bridge
design provides sonic clarity by
improving imaging and allowing more
natural midrange. Aerodynamic shape
eliminates woofer
sound-wave restriction
Tri-Level compensation for room/sound
customization
XB525C Specifications:
• Driver size: 5.25” Woofer / 22mm Tweeter
• Recommend Amplifier Power: 5-60 Watts
• Frequency Response: 50Hz-22kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions: 7.96” DIA. x 5.25” Depth
(202mm x 140mm)
• Cut-Out Size: 6.75” DIA. ((204mm)
• Construction Bracket: XBKT525C *
Order: XB525C
UPC#:4277731385
6.5” XTC CEILING SPEAKER PAIR
XB65C Specifications:
• Driver size: 6.5” Woofer / 22mm Tweeter
• Recommend Amplifier Power: 5-80 Watts
• Frequency Response: 42Hz-22kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions: 9.24” DIA. x 5.5” Depth
(235mm x 140mm)
• Cut-Out Size: 8.05” DIA. (204mm)
• Construction Bracket: XBKT650*
Order: XB65C
UPC#:4277731387
Speakers
5.25” XTC CEILING SPEAKER PAIR
6.5” XTC CEILING STEREO SPEAKER EACH
New-construction and
retro-installation friendly. Bezel frame
and baffle separation feature provides
a wide assortment of installation
scenarios
Easy-lock tabs for simple installation
Gold plated spring terminals
Paintable grill and low-profile frame
XB65CS Specifications:
• Driver size:
6.5” Dual Coil Woofer / Twin 22mm Tweeters
• Recommend Amplifier Power: 5-70 Watts
• Frequency Response: 42Hz-22kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions: 9.24” DIA. x 6” Depth
(235mm x 152mm)
• Cut-Out Size: 8.05” DIA. (204mm)
• Construction Bracket: XBKT650C*
Order: XB65CS
UPC#:4277731388
8” XTC CEILING SPEAKER PAIR
Limited Lifetime Warranty
* Construction Bracket sold separately
XB8C Specifications:
• Driver size: 8” Woofer / 28mm Tweeter
• Recommend Amplifier Power: 10-100 Watts
• Frequency Response: 35Hz-20kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions: 10.92” DIA. x 6”
Depth (277mm x 152mm)
• Cut-Out Size: 9.72” DIA. (247mm)
• Construction Bracket: XBKT800W*
Order: XB8C
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
51
XTC IN-WALL SPEAKERS
5.25” XTC IN-WALL SPEAKER PAIR
Speakers
General Features:
High-density MDF wood baffle provides
sonic clarity by reducing in-wall
vibrations and resonance. Baffle design
increases dynamics, provides solid
bass and midrange performance
Pivotable Teteron dome tweeter
constructed with advance neodymium
magnet, fluid cooled, and rear acoustic
damping
XB525W Specifications:
• Driver size: 5.25” Woofer / 22mm Tweeter
• Recommend Amplifier Power: 5-60 Watts
• Frequency Response: 50Hz-22kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
7.30” W x 11.45” H x 3.75” Depth
(185mm x 291mm x 95mm)
• Cut-Out Size: 6.08” W x 10.23” H
(154mm x 260mm)
• Construction Bracket: XBKT525W*
Order: XB525W
UPC#:4277731386
6.5” XTC IN-WALL SPEAKER PAIR
Durable IMG (injection molded
graphite) woofer for higher sensitivity
and increased sound pressure levels
Tri-Level compensation for room/sound
customization
New-construction and
retro-installation friendly. Bezel frame
and baffle separation feature provides
a wide assortment of installation
scenarios
Easy-lock tabs for simple installation
XB65W Specifications:
• Driver size: 6.5” Woofer / 22mm Tweeter
• Recommend Amplifier Power: 5-80 Watts
• Frequency Response: 42Hz-22kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
8.24” W x 13.46” H x 3.75” Depth
(209mm x 342mm x 95mm)
• Cut-Out Size: 7.02” W x 12.24” H
(178mm x 311mm)
• Construction Bracket: XBKT650W*
Order: XB65W
UPC#:4277731389
8” XTC IN-WALL SPEAKER PAIR
Gold plated spring terminals
Paintable grill and low-profile frame
Limited Lifetime Warranty
XB8W Specifications:
• Driver size: 8” Woofer / 28mm Tweeter
• Recommend Amplifier Power: 10-100 Watts
• Frequency Response: 35Hz-20kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
9.80” W x 16.37” H x 4” Depth
(249mm x 416mm x 102mm)
• Cut-Out Size: 8.58” W x 15.15” H
(218mm x 385mm)
• Construction Bracket: XBKT800W*
Order: XB8W
UPC#:4277731391
* Construction Bracket sold separately
52
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
XTC REFERENCE CEILING SPEAKERS
General Features:
Pivotable Titanium dome tweeter. This
choice alloy material allows pure piston
motion throughout the frequency
spectrum of the system. Rear acoustic
damping and positive rubber surround
removes ringing and achieves pure
tones with low distortion.
Premium Al/Mg (aluminum magnesium
material) woofer stays rigid during the
most extreme bass notes and the agility
results in accuracy and dynamic bass
response. A large titanium woofer voice
coil increases power handling and
results in greater control over the cone.
Solid-density SoundPATH™ bridge
design provides sonic clarity by
improving imaging and allowing more
natural midrange. Aerodynamic shape
eliminates woofer sound-wave
restriction
Tri-Level equalization for room/sound
customization
New-construction and retro-installation
friendly. Bezel frame and baffle
separation feature provides a wide
assortment of installation scenarios
Easy-lock tabs for simple installation
Gold plated spring terminals
Paintable grill and low-profile frame
XA65C Specifications:
• Driver size: 6.5” Woofer
22mm Tweeter
• Recommend Amplifier Power:
10-85 Watts
• Frequency Response: 40Hz-30kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
9.24” DIA. x 5.5” Depth (235mm x 140mm)
• Cut-Out Size: 8.05” DIA. (204mm)
• Construction Bracket: XBKT650C*
Order: XA65C
UPC#:4277731392*
6.5” REFERENCE STEREO SPEAKER EACH
XA65CS Specifications:
• Driver size:
6.5” Dual Coil Woofer
Twin 22mm Tweeters
• Recommend Amplifier Power:
10-80 Watts
• Frequency Response: 40Hz-30kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
9.24” DIA. x 6” Depth (235mm x 152mm)
• Cut-Out Size: 8.05” DIA. (204mm)
• Construction Bracket: XBKT650C*
Order: XA65CS
UPC#:4277731393
Speakers
6.5” REFERENCE CEILING SPEAKER
8” REFERENCE CEILING SPEAKER PAIR
XA8C Specifications:
• Driver size: 8” Woofer
26mm Tweeter
• Recommend Amplifier Power:
10-110 Watts
• Frequency Response: 32Hz-24kHz
• Impedance: 6 or 8-Ohm selectable
• Overall Dimensions:
10.92” DIA. x 6” Depth (277mm x 152mm)
• Cut-Out Size: 9.72” DIA. (247mm)
• Sensitivity (1Watt/1Meter): 90dB
• Construction Bracket: XBKT800C*
Order: XA8C
UPC#:4277731395
Limited Lifetime Warranty
* Construction Bracket sold separately
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
53
XTC REFERENCE IN-WALL SPEAKERS
6.5” REFERENCE IN-WALL SPEAKER PAIR
Speakers
General Features:
High-density MDF wood baffle provides
sonic clarity by reducing in-wall
vibrations and resonance. Baffle design
increases dynamics, provides solid
bass and midrange performance
Pivotable Titanium dome tweeter. This
choice alloy material allows pure piston
motion throughout the frequency
spectrum of the system. Rear acoustic
damping and positive rubber surround
removes ringing and achieves pure
tones with low distortion.
Premium Al/Mg (aluminum magnesium
material) woofer stays rigid during the
most extreme bass notes and the agility
results in accuracy and dynamic bass
response. A large titanium woofer voice
coil increases power handling and
results in greater control over the cone.
Tri-Level equalization for room/sound
customization
New-construction and retro-installation
friendly. Bezel frame and baffle
separation feature provides a wide
assortment of installation scenarios
XA65W Specifications:
• Driver size: 6.5” Woofer
22mm Tweeter
• Recommend Amplifier Power:
10-85 Watts
• Frequency Response: 40Hz-30kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
8.24” W x 13.46” H x 3.75” Depth
(209mm x 342mm x 95mm)
• Cut-Out Size: 7.02” W x 12.24” H
(178mm x 311mm)
• Construction Bracket: XBKT650W
Order: XA65W
UPC#:4277731394*
8” REFERENCE IN-WALL SPEAKER PAIR
XA8W Specifications:
• Driver size: 8” Woofer
26mm Tweeter
• Recommend Amplifier Power:
10-110 Watts
• Frequency Response: 32Hz-24kHz
• Impedance: 6 or 8-Ohm selectable
• Sensitivity (1Watt/1Meter): 90dB
• Overall Dimensions:
9.80” W x 16.37” H x 4” Depth
(249mm x 416mm x 102mm)
• Cut-Out Size: 8.58” W x 15.15” H
(218mm x 385mm)
• Construction Bracket: XBKT800W
Order: XA8W
UPC#:4277731396*
Easy-lock tabs for simple installation
Gold plated spring terminals
Paintable grill and low-profile frame
Limited Lifetime Warranty
* Construction Bracket sold separately
54
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
XOD WEATHER RESISTANT SPEAKERS
6.5” XOD OUTDOOR SPEAKER PAIR
Rust-proof aluminum grill is securely
attached with commercial grade
adhesives that protect the audio drivers
from the elements.
Speakers
General Features:
Locking and pivoting bracket that
allows it to blend into any environment
while making installation fast and
simple.The smooth and sleek design
reduces dust and dirt buildup} thus
preserving its overall look and
performance.
White - XOD65W Specifications:
• Driver Size: 6.5” Woofer/28mm Tweeter
• Recommended Amplifier Power: 10-120 Watts
• Frequency Response: 55Hz-20kHz
• Impedance: 8 ohm
• Sensitivity (1 Watt/1Meter): 90 dB
• Overall Dimensions: 8.5” W x 12” H x 7.5”L
Order: XOD65
UPC#:4277731394*
UPC#:4277731396*
The ported design allows for a lower
frequency and comes with a harshenvironment plug that will withstand
rough conditions. In addition, the XOD
Series comes equipped with premium
gold-plated wire post that were
specifically designed to withstand harsh
outdoor elements. The 5-way binding
posts are knurled to help make
installation quick and maintenance free.
2-way speaker design composed of a
Teteron dome tweeter and an injection
molded graphite (IMG) woofer.
Constructed with an advance
neodymium magnet, the woofer
features a large voice coil which allows
responsive performance and loud, tight
bass when the user demands it.
Limited Lifetime Warranty
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
55
VOLUME CONTROLS
100 WATT ROTARY VOLUME CONTROL
Volume Controls and Speaker Selectors
•
•
•
•
•
•
Power handling: 100 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White faceplates and knobs included in box
UL Listed
RoHS compliant
Order: XVC100
UPC#:4277731425
100 WATT ROTARY DECORA VOLUME CONTROL
•
•
•
•
•
•
Power handling: 100 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White Decora inserts and knobs included in box
UL Listed
RoHS compliant
Order: XVCD100
UPC#:4277731428
100 WATT ROTARY DECORA VOLUME CONTROL WITH IR
•
•
•
•
•
•
•
Power handling: 100 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White Decora inserts and knobs included in box
IR modulation frequency bandwidth: 30 -100 kHz
RoHS compliant
UL Listed
Order: XVCD100IR
UPC#:4277731422
100 WATT DECORA SLIDER VOLUME CONTROL
•
•
•
•
•
•
Power handling: 100 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White Decora slider inserts included in box
UL Listed
RoHS compliant
Order: XVCS100
UPC#:4277731426
100 WATT DECORA SLIDER VOLUME CONTROL WITH IR
• Power handling: 100 W/channel RMS
• For use with an amplifier of equal or lesser power rating only
• Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
• Almond, Black, Ivory and White Decora slider inserts included in box
• IR modulation frequency bandwidth: 30 -100 kHz
• RoHS compliant
• UL Listed
Order: XVCS100IR
UPC#:4277731427
50 WATT ROTARY VOLUME CONTROL
•
•
•
•
•
•
56
Power handling: 50 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
White Almond, Ivory, and Black faceplate and knob included
UL Listed
RoHS compliant
Order: XVC50P
UPC#:4277731491
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
VOLUME CONTROLS
•
•
•
•
•
•
Power handling: 50 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White faceplates and knobs included in box
UL Listed
RoHS compliant
Order: XVCD50P
UPC#:4277731492
50 WATT DECORA SLIDER VOLUME CONTROL
•
•
•
•
•
•
Power handling: 50 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White Decora slider inserts included in box
UL Listed
RoHS compliant
Order: XVCS50
UPC#:4277731429
100 WATT OUTDOOR VOLUME CONTROL
•
•
•
•
•
•
The Power handling: 100 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Weatherproof enclosure included (grey color)
UL Listed
RoHS compliant
Order: XVCO100
UPC#:4277731421
REMOTE AUTO TRANSFORMER
• The RAT1 is an infrared remote controlled stereo speaker volume
control with impedance matching capability.
• 10-position, relay driven, stepped auto transformer design
• Tri-Fi™ winding system for highest quality audio performance
• Includes plug-in type screw terminals
• Independent grounds between channels
• Easily mounted “flat pack” design
• Requires 782ERGPS Power Supply and RC68 IR Programmer
• Requires MIRV1 to Control Volume
Order: RAT1
Volume Controls and Speaker Selectors
50 WATT ROTARY DECORA VOLUME CONTROL
UPC#:4277730031
Electronic Volume Control
• Power Handling: 1000W/channel RMS For use with an amplifier of
equal or lesser power rating only
• Adjustable impedance matching for up to 4 speaking pair (1,2,4 pairs)
• White face plate and low-profile buttons
• Includes pocket-size remote control
• RoHS Compliant
Order: XVCE100IR
UPC#:4277730031
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
57
SPEAKER SELECTORS
Volume Controls and Speaker Selectors
SIX PAIR, TWO SOURCE SPEAKER SELECTOR
58
•
•
•
•
•
•
•
•
Power handling: 50 watts per channel RMS; 150 watts peak
Selectable impedance matching for 1, 2, 3/4, or 5/6 speaker pairs
Compatible with 4-Ohm or 8-Ohm speaker systems
Allows switching between two amplified source inputs
Individual room on/off selector switches
12-step volume control; 42dB maximum attenuation
Isolated inputs for compatibility with all amplifiers
Screw terminal WECO connectors included for 12-22 gauge wire
Order: XSS26100W
UPC#:4277731483
FOUR PAIR, TWO SOURCE SPEAKER SELECTOR
•
•
•
•
•
•
•
•
Power handling: 50 watts per channel RMS; 150 watts peak
Selectable impedance matching for 1, 2, or 3/4 speaker pairs
Compatible with 4Ohm or 8 Ohm speaker systems
Allows switching between two amplified source inputs
Individual room on/off selector switches
12-step volume control; 42dB maximum attenuation
Isolated inputs for compatibility with all amplifiers
Screw terminal WECO connectors included for 12-22 gauge wire
Order: XSS24100W
UPC#:4277731482
A/B SPEAKER OR SOURCE SELECTOR
•
•
•
•
•
•
Power handling: 250 watts per channel RMS
Allows switching between two pairs of speakers or two amplified sources
Rocker type switch
For use with Decora style faceplate (not included)
Color: White
5 year limited warranty
Order: XSSD250W
UPC#:4277731485
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
SPEAKER SELECTORS
•
•
•
•
•
•
Power handling: 100 watts per channel RMS
Source A/B selector and speaker A/B/A+B selector/combiner
Volume control loop allows adding external speaker level volume control
For use with Decora style faceplate (not included)
Color: White
5 year limited warranty
Order: XSSD2100W
UPC#:4277731484
REMOTE SPEAKER SWITCHER
The 686-10 is a stand alone speaker switcher. It allows the installer and
user to turn six pairs of speakers ON and OFF using RC68X IR commands.
• Allows local or global command of speaker control.
• Requires 782ERGPS Power Supply
• Requires RC68X IR Programmer
Order: 68610
UPC#:4277768610
REMOTE A/B SPEAKER RELAY MODULE
• Stand alone remote controlled A/B speaker switcher
• Connects one amplifier to an ‘A’ or ‘B’ speaker pair
• Connects one speaker pair to either an ‘A’ or ‘B’ amplifier
• 5 amp/30VDC current rated relay
• IR input terminals
• IR code select switch
• Requires 781ERGPS or 782ERGPS Power Supply
• Requires RC68X IR Programmer
Order: SR21
UPC#:4277730095
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Volume Controls and Speaker Selectors
TWO PAIR, TWO SOURCE SELECTOR/COMBINER
59
AMPLIFIERS
FEATURE
PA1235
PA1235X
PA635
PA635X
PA435X
PA4100X
Selectable Channel
Modes
6 stereo,
35 Watts/ch
6 stereo,
35 Watts/ch
3 stereo, 35 Watts/
ch
3 stereo,
35 Watts/ch
2 stereo,
35 Watts/ch
2 stereo,
100 Watts/ch
Mode 1
Mode 2
Amplifiers
Mode 3
Mode 4
4 stereo, 35 Watts/ 4 stereo, 35 Watts/
ch and 1 stereo,
ch and 1 stereo,
80 Watts/ch bridged 80 Watts/ch bridged
2 stereo,
2 stereo, 35 Watts/
35 Watts/ch and
ch and 2 stereo,
2 stereo,
80 Watts/ch bridged
80 Watts/ch bridged
3 stereo,
3 stereo,
80 Watts/ch bridged 80 Watts/ch bridged
1 stereo,
1 stereo,
1 stereo,
35 Watts/ch
35 Watts/ch
80 watts/ch bridged
and 1 stereo,
and 1 stereo,
80 Watts/ch bridged 80 Watts/ch bridged
3 mono,
3 mono,
80 Watts/ch bridged 80 Watts/ch bridged
Front panel status LED
Yes
Yes
Yes
Yes
Yes
Yes
IR controlled level,
balance & mute for each
channel. pair?
Yes
No
Yes
No
No
No
Common input buss
individually selectable
for each stereo amp?
Yes
No
Yes
No
No
No
On/Off control of each
stereo amp
IR and DC voltage
Main power only
IR and DC voltage
Main power only
DC voltage
DC voltage
Low Impedance
Capability
Each amplifier is 4-ohm rated. This means two pair of 8-ohm speakers can be driven safely in each zone.
Auto Protection
Each channel is protected separately if a short or very low impedance is detected
at the speaker terminals. Operation is restored after the short is removed.
Rack Mountabler
3 x 19” rack spaces
3 x 19” rack spaces
2 x 19” rack spaces
2 x 19” rack spaces
N/A
N/A
Requires RC68X
Programmer for IR
control
Yes
N/A
Yes
N/A
Yes
N/A
Rated continuous power, each channel 8 ohms 35 Watts.
(all channels simultaneously driven, 20 Hz to 20kHz at rated THD, 8 ohms)100 Watts RMS
100 Watts RMS
Short Term Continuous
Power
Each channel: 8 ohms, 55 Watts (2 channels driven, 1 kHz, at rated THD) or 4 ohms, 80 Watts.
150 Watts RMS
Bridged Power Output
8 ohms, 150 Watts (Short term continuous, one pair driven, 1 kHz, at rated output power)
N/A
Power Output
THD
Rated THD < 0.08%, Damping Factor: (@ 50Hz, 8 ohms, rated power) > 100, S/N Ratio: A-Weighted (ref. to rated power) > 96dB
0.2V - 3.3V
Input Sensitvity
+5 +30VDC
Remote Trigger Voltage
120 VAC, 60Hz; 240 VAC, 50Hz (European version)
Power Supply
Directly interfaces to
MRC88CTL
No
Intelligent cooling
Dimensions
Weight
60
Yes
No
Yes
Yes
19” W x 15” D x
5” H (429mm x
126mm x379mm)
19” W x 15” D x 5” H
(429mm x 126mm
x379mm)
17” W x 15” D x 3.75” H
(429mm x 94mm x
379mm)
17” W x 15” D x
3.75” H
(429mm x 94mm x
379mm)
17” W x 4” H x
11.5” D
(432mm x 102mm
x292mm)
17” W x 6” H x
13” D
(432mm x 153mm
x331mm)
37 lbs (16.8 kg)
36.85 lbs (16.7 kg)
22.3 lbs (10.1 kg)
22.3 lbs (10.1 kg)
20.4 lbs (9.3 kg)
35.4 lbs (16.1kg)
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
AMPLIFIERS WITH IR
12 CHANNEL POWER AMPLIFIER WITH IR
Amplifiers
AMPLIFIERS
PA1235 FEATURES:
• 35 Watts per channel (bridgeable)
• Selectable channel modes
• Adjustable input sensitivity
• DC voltage controlled (main power)
• Auto protection
• Rack mountable
• Also available in 230 VAC / 50 Hz.
• IR controlled level, balance and mute
• Local or common buss input switching
• IR and DC voltage controlled
• Requires RC68X programmer for IR control
Order: PA1235
UPC#:4277731126
SIX CHANNEL POWER AMPLIFIER WITH IR
PA635 FEATURES:
• 35 Watts per channel (bridgeable)
• Selectable channel modes
• Adjustable input sensitivity
• DC voltage controlled (main power)
• Auto protection
• Rack mountable
• Also available in 230 VAC / 50 Hz.
• IR controlled level, balance and mute
• Local or common buss input switching
• IR and DC Voltage Controlled
• Requires RC68X programmer for IR control
Order: PA635
UPC#:4277731162
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
61
AMPLIFIERS
12 CHANNEL POWER AMPLIFIER
Amplifiers
PA1235X FEATURES:
• 35 Watts per channel (bridgeable)
• Selectable channel modes
• Adjustable input sensitivity
• DC voltage controlled (main power)
• Auto protection
• Rack mountable
• Also available in 230 VAC / 50 Hz.
Order: PA1235X
UPC#:4277731164
SIX CHANNEL POWER AMPLIFIER
PA635X FEATURES:
• 35 Watts per channel (bridgeable)
• Selectable channel modes
• Adjustable input sensitivity
• DC voltage controlled (main power)
• Auto protection
• Rack mountable
• Also available in 230 VAC / 50 Hz.
Order: PA635X
UPC#:4277731163
100 WATT FOUR-CHANNEL POWER AMPLIFIER
•
•
•
•
DC voltage controlled (main power)
Adjustable input Sensitivity
Front panel status LED’s
Directly interfaces with the MRC88CTL via stereo
mini-plug allowing power control and muting
• Intelligent, temperature controlled cooling
• Also available in 230 VAC / 50 Hz.
Order: PA4100X
UPC#:4277731191
35 WATT FOUR-CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
35 Watts per channel (Bridgeable)
Selectable Channel Modes
Adjustable input Sensitivity
DC Voltage Controlled (main power)
Directly interfaces with MRC systems
Also available in 230 VAC / 50 Hz.
Order: PA435X
62
UPC#:4277731192
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
MRAUDIO4X4
MRC44CTL
MRAUDIO8X8m
MRC88m
Source Inputs
4 Audio
4 Audio / 4 Video
8 Audio
8 Audio / 8 Video
Zone Outputs
4
4
8
8
N/A
N/A
8
8
4 Zones: 8 - 25w/CH
(35W Peak @8ohms)
4 Zones: 8 - 25w/CH
(35W Peak @8ohms)
6 Zones: 12 - 35w/CH
(55WPeak @8ohm)
6 Zones: 12 - 35w/CH
(55WPeak @8ohm)
Pre Amp Outputs
NO
NO
Yes (all 8 Zones) Fixed
or Variable
Yes (all 8 Zones) Fixed
or Variable
Video Zone Output
N/A
Composite
N/A
Composite
PC Programmable
Yes
Yes
Yes
Yes
XPS Direct IR
Programming
NO
NO
NO
NO
Yes*
Yes*
Yes*
Yes*
Routable Emitter Ports
4 Source Emitters
4 Source Emitters
16 (8 Source Emitters
/ 8 Zone Emitters)
16 (8 Source Emitters
/ 8 Zone Emitters)
Common Emitter Port
Yes
Yes
Yes
Yes
4-283M
4-283M
8-283M
8-283M
NO
NO
Yes, 2 bidirectional
routable ports (Expandable to 16 using
RS2321X8 Router)
Yes, 2 bidirectional
routable ports
(Expandable to 16 using
RS2321X8 Router)
4 Max
4 Max
8 Max
8 Max
NO
NO
Yes
Yes
Height: 4” (81mm)
Width: 17” (432mm)
Depth: 11.5” (292mm)
Height: 4” (81mm)
Width: 17” (432mm)
Depth: 11.5” (292mm)
Height: 7.5” ( 189mm)
Width: 17” ( 429mm )
Depth: 15.75” (400mm)
Height: 7.5” ( 189mm)
Width: 17” ( 429mm )
Depth: 15.75” (400mm)
Weight: 22.75 lbs
(10.34 kg)
Weight: 22.75 lbs
(10.34 kg)
Weight: 45 lbs
(20.4 kg)
Weight: 45 lbs
(20.4 kg)
Expandable
Yes
Yes
Yes
Yes
Available
230 VAC / 50 Hz
Yes
Yes
Yes
Yes
FEATURES
Local Zone Audio Inputs
Amplifier Output
(#Channels / Power
Rating)
Intelligent Power
Management
Emitters Included
RS232 Support
Macro Trigger Ports
(Contact Closure or
12VDC Trigger)
Doorbell / Page Support
Dimensions:
Weight:
Multi-Zone Distribution and Control
MRC/MRAUDIO/BXAUDIO SPECIFICATIONS CHART
Additional components may be required. See Sensor Modules, Page 45 for more details.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
63
Multi-Zone Distribution and Control
MRAUDIO4X4CTL AUDIO CONTROLLER/AMPLIFIER
Xantech
Multi Room Distribution Quick Reference
8 Zone 8 Source with video ................................................MRC88m
8 Zone 8 Source........................................................MRAUDIO8x8m
4 Zone 4 Source with video ...................................................MRC44
4 Zone 4 Source ..........................................................MRAUDIO4x4
64
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
MRAUDIO4X4CTL AUDIO CONTROLLER/AMPLIFIER
The MRAUDIO4X4CTL allows IR control of up to four source components distributed to four zones.
• Four Audio inputs
• Expandable to eight zones
• 2x25W/Ch per zone audio amplification
• Controlled through dedicated MRC44 keypads
as well as SPLCD SmartPad LCD™
• Easily programmed through
Speaks Dragon
Universal Dragon-Drop IR™ software
• Programmable macros allow simplified device control
• Intelligent Power Management for positive device control
• Volume and EQ status feedback through MRC44 keypads
Order MRAUDIO4X4CTL
UPC#:4277731272
MRAUDIO4X4CTL SYSTEM DIAGRAM
Multi-Zone Distribution and Control
FOUR ZONE/FOUR SOURCE AUDIO CONTROLLER/AMPLIFIER
The Xantech MRAUDIO4X4 creates four separate listening zones where each zone can select a different source.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
65
MRC44CTL AUDIO/VIDEO CONTROLLER/AMPLIFIER
Multi-Zone Distribution and Control
FOUR ZONE/FOUR SOURCE AUDIO/VIDEO CONTROLLER/AMPLIFIER
The MRC44CTL allows IR control of up to four A/V source components distributed to four zones.
• Four Audio inputs
• Four Video inputs
• Expandable to eight zones
• 2x25W/Ch per zone audio amplification
• Controlled through dedicated MRC44 keypads
Speaks Dragon
as well as SPLCD SmartPad LCD™
• Easily programmed through
Universal Dragon-Drop IR™ software
• Programmable macros allow simplified device control
• Intelligent Power Management for positive device control
• Volume and EQ status feedback through MRC44 keypads
Order: MRC44CTL
UPC#:4277731248
MRC44CTL SYSTEM DIAGRAM
Watch what you want where you want it with the MRC44CTL System
66
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
MRAUDIO8X8M AUDIO CONTROLLER/AMPLIFIER
The MRAUDIO8X8M is an eight-source, eight-zone audio distribution amplifier that allows the control and
distribution of eight separate source components to eight different zones, with the capacity to expand to up to sixteen zones of
control and distribution. It allows control of source components
through both RS232 and IR. The MRAUDIO8X8M offers many improvements
over the MRAUDIO8X8CTL.
• Eight Audio inputs
• Eight zone-specific stereo pre amp outputs
• Expandable to 16 zones
• Six zones (2x35W/Ch); Two zones pre amp out only
Speaks Dragon
• Improved response speed to queries and commands.
• Up to seven (7) lines of meta-data are available with the SPLCD64V
SPLCD64G and SPLCD39G. Information obtained from sources.
• Intelligent Power Management for positive device control
through current sense on all 8 source inputs
• 16 routable IR ports
• Will contain the next generation IR code library.
Order: MRAUDIO8X8m
UPC#:4277731312
The Xantech MRAUDIO8X8m System
delivers music to eight zones
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Multi-Zone Distribution and Control
EIGHT ZONE/EIGHT SOURCE AUDIO CONTROLLER/AMPLIFIER
67
MRC88M AUDIO/VIDEO CONTROLLER/AMPLIFIER
Multi-Zone Distribution and Control
EIGHT ZONE/EIGHT SOURCE AUDIO/VIDEO CONTROLLER/AMPLIFIER
68
The MRC88m is an eight-source, eight-zone A/V distribution amplifier that allows the control and distribution of eight separate
source components to eight different zones, with the capacity to expand to up to sixteen zones of control and distribution.
It allows control of source components through both RS232 and IR. The MRC88m offers many operational improvements over
the MRC88.
• Eight Audio inputs
• Eight Video inputs
• Eight zone-specific stereo pre amp outputs
• Expandable to 16 zones
• Six zones (2x35W/Ch); Two zones pre amp out only
• Controllable through SPLCD SmartPad LCD™
as well as dedicated MRC88 keypads
Speaks Dragon
• Easily programmed through
Universal Dragon-Drop IR™ software
• Programmable macros allows simplified device control
• Intelligent Power Management for positive device control
through video and current sense on all 8 source inputs
• 16 routable IR ports
• Two routable bi-directional RS232 ports
• Also available in 230 VAC / 50 Hz.
• Contains Larger memory for your projects compared to the MRC88.
• Improved response speed to queries and commands.
• The MRC88m will contain the next generation IR code library.
Order: MRC88m
UPC#:4277731460
Xantech gives you the ability to
distribute Audio and Video to eight areas.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
MULTI-ZONE CONTROL INTERFACE IN-WALL
LCD TOUCHSCREENS
6.4” SMARTPAD LCD VIDEO TOUCHPANEL
controller. Its 640 x 480 resolution, with 64K color, provides outstanding graphics and a remarkable video image, which may
be displayed full screen, or as picture-in-picture.
• Touchpanel controller with video display
• Fully customizable display graphics
• Video image may be displayed full-screen, or PiP mode
• Stand-alone device to output IR and/or RS232 commands
• Internal pre-programmed IR code library,
as well as capability to learn IR commands
• Built-in IR receiver
• SPLCDPS1 Power supply required (p38)
• Front panel IR learning eye
• Integrated Macronizer executes long macros without errors
Speaks Dragon
Order: SPLCD64VW
UPC#: 4277731265
6.4” SMARTPAD LCD GRAPHIC TOUCHPANEL
The SPLCD64G gives users the convenience and simplicity of a touchpanel controller in a self-contained unit that is easy to
install, easy to program, and, perhaps best of all, easy to afford. Its 640 x 480 resolution with 64K color provides outstanding
graphics and clarity.
• Stand-alone device to output IR and/or RS232 commands
• Fully customizable display graphics
• XDT Station feedback, and XMUSIC song title navigation
• Internal pre-programmed IR code library, as well as capability
to learn IR commands
• Built-in IR code library
• Built-in IR receiver
• SPLCDPS1 Power supply required (p38)
• Front panel IR learning eye
• Fully compatible with the MRC88m / MRAUDIO8X8m controllers with
Speaks Dragon
bi-directional status indication
Order: SPLCD64GW
UPC#: 4277731243
3.9” SMARTPAD LCD GRAPHIC TOUCHPANEL
Multi-Zone Distribution and Control
The SPLCD64V combines video display with the convenience and simple operation of a self-contained touchpanel
The SPLCD39G brings the convenience, elegance, and simplicity of a LCD touchscreen controller
to a smaller sized, self-contained unit that fits in just about anywhere.
Its 320 x 240 resolution with 256 colors provides remarkable graphics and clarity.
• Stand-alone device to output IR and/or RS232 commands
• Fully customizable display graphics
• XDT Station feedback, and XMUSIC song title navigation
• Internal pre-programmed IR code library, as well as capability
to learn IR commands
• Built-in IR code library
• Built-in IR receiver
• SPLCDPS1 Power supply required (p38)
• Front panel IR learning eye
Speaks Dragon
• Fully compatible with the MRC88m / MRAUDIO8X8m controllers with
bi-directional status indication
Order: SPLCD39GW
UPC#: 4277731216
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
69
MULTI-ZONE CONTROL INTERFACE
LCD TOUCHSCREEN REMOTE
HAND-HELD LCD TOUCHSCREEN REMOTE
Multi-Zone Distribution and Control
The XTR39 is a stylish, simple-to-use remote control that can be personalized via its vivid full color 3.9” touchscreen
display: button layout can be customized; easily identified icons created for virtually any function or command; and multiple
screen pages allow less frequently used buttons to be concealed.
•
•
•
•
•
•
Vivid 3.9” Color LCD touchscreen display
Fully customizable screen graphics and functions
Capable of controlling virtually every major home system
Hard buttons for frequently used commands
Four easy access programmable macro buttons
Comes complete with power supply and charging cradle
Order: XTR39
Speaks Dragon
UPC#: 4277731420
RF BASE STATION FOR XTR39
The RF2IR* base station is the ultimate accessory to the Xantech XTR39 Color LCD remote control. It’s a receiver that
accepts the Radio Frequency output of the XTR39 remote and translates it into IR and RS232 command signals that can
control virtually any home electronic device. The RF2IR makes it simple to set up a reliable and sophisticated multi-room
control system that is easily controlled by the intuitive LCD touchscreen control of the XTR39 remote.
•
•
•
•
•
•
•
•
•
Control your components up to 100 feet away** even through walls!
Plasma, LCD, and Sunlight proof operation
RF signal based on the dependable IEEE 802.15.4 standard
16 selectable sub-channels ensure interference-free operation
Speaks Dragon
Single XTR39 can control up to 256 RF2IR base stations for
virtually limitless control possibilities
Four routable IR outputs make it simple to control the source
components of virtually any home entertainment system
RS232 output makes it possible to control display devices, lighting
controls and more with discrete command codes for performance
Selectable front panel IR ‘Blaster’
Comes complete with (1) power supply (4) 283M IR Emitters (1) RS232 Cable
Order: RF2IR
UPC#: 4277731414
*RF2IR and XTR39 are sold separately **Depending on local conditions, range may vary
FOR FREE ADDITIONAL INFORMATION & VIDEO TRAINING VISIT WWW.XANTECH.COM/TRAINING.HTM
70
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
MRC/MRAUDIO KEYPADS
• Flush-mount in dual gang J-box
• Keypad dimensions (W, D, H) 5” x 1.5” x 5”
• Keypads have LCD Screen for Source Status and
Source Feedback Display
• Backlit function buttons for ease of use in low light situations
• Keypad connection to controller/amplifier via CAT5
cable terminated with RJ45 connectors
• Maximum 4 keypads per zone
• Available in white, almond, ivory and black
Order Almond: MRC88DJKPA
UPC#:4277731279
Order Black: MRC88DJKPB
UPC#:4277731333
Order Ivory: MRC88DJKPI
UPC#:4277731334
Order White: MRC88DJKPW
UPC#:4277731335
MRC44CTL - MRAUDIO4X4CTL KEYPAD WITH LCD DISPLAY
• Flush-mount in dual gang J-box
• Keypad dimensions (W, D, H) 5” x 1.5” x 5”
• Keypads have LCD Screen for Source Status and
Source Feedback Display
• Backlit function buttons for ease of use in low light situations
• Keypad connection to controller/amplifier via CAT5 cable
terminated with RJ45 connectors
• Maximum 4 keypads per zone
• Available in white, almond, ivory and black
Order Almond: MRC44DJKPA
UPC#:4277731277
Order Black: MRC44DJKPB
UPC#:4277731330
Order Ivory: MRC44DJKPI
UPC#:4277731331
Order White: MRC44DJKPW
UPC#:4277731332
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Multi-Zone Distribution and Control
MRC88m - MRAUDIO8X8m KEYPAD WITH LCD DISPLAY
71
MRC/MRAUDIO ACCESSORIES
HAND-HELD REMOTE
• Preprogrammed remote designed to work with the MRC88, MRC44 & BXAUDIO
• No programming required. Works right out of the box.
UPC#:4277731303
Order: MRCREMRP
Multi-Zone Distribution and Control
MRC KEYPAD SPLITTER
• Allows two MRC keypads to be used in a zone without the need to “daisy-chain” them
• Allows each keypad wire to be “home-runned” to the MRC Controller
• Provides additional IR receiver input
Order: MRCKPSP
UPC#:4277731278
SPEAKER LEVEL TO LINE LEVEL CONVERTER
• Converts speaker level output to line level
• Use with amp outputs of MRC44/MRAUDIO44 for use with auxiliary amplifier
Order: SLLC1
UPC#:4277731346
MRC44CB1 CONNECTING BLOCK
• Add external Xantech IR Receivers in conjunction with MRC44/88 Keypads
• Extend maximum distance of secondary MRC keypad to 600 feet
• External power supply selector jumper enables use of external 12V supply
for longer cable runs and applications requiring higher current capacity supplies
• Requires 782ERGPS Power Supply
Order: MRC44CB1
UPC#:4277731453
ZONE AUDIO INPUT KIT
Allows Zone Audio and Video connection with IR control. Perfect for connecting local in-room
source equipment to an A/V distribution system through Cat 5 cable over 300’ away
• Fits in single gang J-box
• Connections for Composite Video, Stereo Audio, IR control
• Comes complete with power supply
Order: ZAKIT
UPC#:4277731347
ZONE AUDIO TRANSMITTER
• Single gang Decora style plate
• Transmit line level audio over CAT5 cable up to 300’
UPC#:4277731337
Order: ZATRAN
ZONE AUDIO RECEIVER
• Allows up to eight local audio inputs to be elegantly connected to the Zone Audio Inputs
on a MRC/MRAUDIO Controller
• Accepts input of up to eight ZATRAN Zone Audio Transmitters
Order: ZA8REC
UPC#:4277731352
MRC88m - MRAUDIO8X8m 15-pin to 9-pin EXPANSION CABLE
• 15-pin to 9-pin expansion cable for use with MRC88CTL/MRAUDIO8X8
• Enables expansion port to be used with XMUSIC, XDT or any RS232 device
Order: 05913665
NULL MODEM EXPANSION CABLE
Used for MRC44CTL / MRAUDIO4X4 / BXAUDIO4X4 expansion.
72
Order: 05913560
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
NEW MRC88CTL - MRAUDIO8X8CTL
DOORBELL PAGING SYSTEM
• Combines existing home phone system and MRC88m/MRAUDIO8X8m
to provide whole-house paging and doorbell capability
• Add Doorbell Communicator and Doorbell Communicator Hub to the
Doorbell Paging Controller on a MRC88m/MRAUDIO8X8m system
for a complete entry control and paging solution.
• Complete with power supply
Order: DPC100
UPC#:4277731515
DOORBELL COMMUNICATOR
Single-gang mounted entry intercom and doorbell
• Use with Doorbell Communicator Hub to add whole-house doorbell
capability and entry intercom to a MRC88m/MRAUDIO8X8m system
• Available in Stainless Steel or Oil Rubbed Bronze
• Requires Doorbell Communication Hub DCH4
Order Stainless Steel: DCSS
Order Bronzed Black: DCCBB
UPC#:4277731517
DOORBELL COMMUNICATOR HUB
Keyless entry controller for use with the MRC88CTL/MRAUDIO8X8CTL controller
• Answer and open up to 4 doors or gates from your nearest phone
• Provides two different door chimes and whole-house paging when
combined with DPC100 and MRC88m/MRAUDIO8X8m
• Allows whole-house doorbell capability with MRC88m/MRAUDIO8X8m
• Use with Doorbell Communicator DCSS or DCBB
• Complete with power supply
Order: DCH4
UPC#:4277731514
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Multi-Zone Distribution and Control
DOORBELL PAGING CONTROLLER
73
NEW ETHERNET MRC88CTL CONTROL INTERFACE
Multi-Zone Distribution and Control
ETHERNET MRC88m CONTROL INTERFACE
74
Xantech’s technical advances have led to the creation of the MRWC Multi-Room Web Controller. Right out of the box, the
MRWC is capable of controlling Xantech’s award-winning MRC88m and MRAUDIO8X8m distribution amplifiers from a webbased platform. The integrated web server enables Xantech products to be accessed, monitored and controlled from any
computer connected to a Local Area Network (LAN)
• RS232/422/485 Serial ports – Fully configurable bi-directional serial port to control A/V devices.
• Integrated Web server – The MRWC features a built-in webpage to control Xantech products.
• Multi-user support – Advanced operating system supports multiple, non-exclusive, connections from several computers
simultaneously. Access via a maintenance kiosk and laptop computer can occur at the same time.
• Comes complete with power supply.
Order: MRWC
UPC#: 4277731316
ZONE 6
ZONE 1
ZONES 1 THROUGH 6
EQUIPMENT ROOM
MRC88m
ETHERNET
ETHERNET ROUTER
RS232
MRWC
LAPTOP
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
SOURCE COMPONENTS
IPOD SOLUTION
•
•
•
•
•
•
•
•
•
•
On-TV Menu display for easy music and video menu navigation
High-resolution Component Video output 480P
Displays full artist/song title and album art information during song playback
Compatible with iPod Nano (1-3G), iPod (5G/5.5G), iPod Classic and iPod Touch
Choose from six different on-screen color themes
Support for Touch Panel Control
Multi-language compatible: English, Japanese, French, Spanish,
Italian, Dutch, German and Russian
Enjoy your iPod collection while simultaneously docked and charging
Floating screen saver that provides “now playing”
and album art information
• DB9 RS232/422 Connector
• Power supply included
• Includes 15 Button remote
Order: XIS100
“Made for iPod” means that an electronic accessory has been designed to connect specifically
to iPod and has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of the device or its compliance with safety and regulatory
standards. iPod is a trademark of Apple Inc. registered in the U.S. and other countries.
Source Components
Integrate your IPOD into any Multi-room or home entertainment system.
XT1
The XT1 AM/FM RDS, when paired with our Xantech MRC88m multiroom controller, sends tuner information to our
SmartPad LCD™ controllers and MRC88 Keypads, such as station band and frequency, as well as RDS RT, PS, and PTY. The
XT1 tuner, with its 32 combined AM or FM presets, offers simple, easily customized operation, while the built-in memory
backup stores this information in the event that power is lost. The XT1 offers a small footprint. Up to 3 XT1 tuners can
be mounted on a 1U Rackmount Bracket (model 1U3XT1RM). This high-quality tuner assures clean, distortion-free audio
throughout the house.
• High-quality AM/FM RDS Tuner.
• Up to 6 XT1 tuners can independently communicate and be controlled by Xantech MRC88m
• Small footprint – up to 3 units can be installed in a 1U rack slot with 1U3XT1RM kit (sold separately)
• Controllable by both IR (via rear panel connector), and RS232
• The XT1 sends tuner information (including FM RDS data) to our SmartPad LCD™
controllers, as well as MRC88 Keypads
• 32 Presets total (FM or AM or a combination of both)
• Memory backup stores preset information in case of power loss
• Rack Mountable with 1U3XT1RM kit (sold separately)
•Available in 120VAC / 60 Hz and 230 VAC / 50 Hz
Order: XT1
UPC#:4277731304
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
75
A/V SWITCHERS
PRE-AMP A/V DISTRIBUTION SYSTEM
A/V Switchers
The ZPR68-10 is an extremely versatile, rack-mountable Pre-amp A/V distribution system, distributing up to eight source
components through six zones. When combined with EXP9 Expansion Modules (see below), the ZPR68-10 can be used to
control distribution to up to 24 separate zones. Each zone output can be individually pre-programmed to achieve proper volume and tonal balance to compensate for the speakers and acoustics in each zone. The ZPR68-10 is controllable by either IR
or RS232 serial commands through any of Xantech’s keypad control systems, including SPLCD Touchpanels, SmartPad3™
Keypads, or WPK Waterproof Keypads.
• Eight-source, six-zone A/V control system,
expandable to 24 zones with EXP9 (see below)
• Zone pre-amp outputs allow flexibility to match amplifier
power to job requirements
• Controllable via IR or RS232 commands
(IR control requires RC68X programmer, not included)
• Rack-mountable (requires RMZPR, not included)
Order: ZPR6810
UPC#:4277731008
ZONE EXPANSION CABLE KIT FOR ZPR68-10
Order: EXP1524
UPC#:4277731485
RACK MOUNT ADAPTOR FOR ZPR68-10
Order: RMZPR
UPC#:4277731062
ZPR68-10 EXPANSION MODULES
The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote
Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create
24 zones of control (requires EXP1524 cable, not included).
1 ZONE MODULE
Order: EXP9-1 UPC#:4277731013
2 ZONE MODULE
Order: EXP9-2
PC#:4277731014
3 ZONE MODULE
Order: EXP9-3
UPC#:4277731015
4 ZONE MODULE
Order: EXP9-4
UPC#:4277731016
5 ZONE MODULE
Order: EXP9-5
UPC#:4277731017
6 ZONE MODULE
Order: EXP9-6
UPC#:4277731018
7 ZONE MODULE
Order: EXP9-7
UPC#:4277731019
8 ZONE MODULE
Order: EXP9-8
UPC#:4277731020
9 ZONE MODULE
Order: EXP9-9
UPC#:4277731021
1 ZONE OUTPUT BOARD FOR EXP9 Order: XCARD
RACK MOUNT ADAPTOR FOR EXP9 Order: RMEXP
76
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
A/V SWITCHERS
6-WAY A/V DISTRIBUTION AMPLIFIER
•
•
•
•
•
•
Flat pack case allows easy space-saving positioning and mounting
Drives up to six audio/video components from a single A/V source
Low A/V distortion for crisp sound and picture
A/V input/outputs: RCA-type phono jacks
Power Supply: 16V DC @ 300 mA (included)
Dimensions:10”W x 2 3/4”D x 11/4”H
(254mm x 70mm x 32mm)
• Power supply 15VAC @ 400 mA (included)
Order: AV61
UPC#:4277730029
Four in, one out infrared remote controlled audio/video preamp.
IR control of Source Select, Volume, Bass, Treble, Balance and Mute.
• Four Source A/V inputs
• Separate Volume (Up/Down), Balance (Left/Right),
Bass and Treble controls feature continuous adjustment
in 2 dB steps, in either direction, all IR controlled
• Comes complete with power supply
• “Flat Pack” design for ease of placement and mounting
• IR input with IR confirm LED for use with Xantech IR controlled systems
• Requires RC68X hand-held remote programmer for IR control codes
• The RP41AV is adjustable to different RC68X IR control code
groups, allowing individual control of multiple RS41AV’s in a system
• “Flat Pack” design for ease of placement and mounting
• Power supply 15VAC @ 400 mA (included)
Order: RP41AV
A/V Switchers
IR REMOTE PREAMP
UPC#:4277730025
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
77
PROGRAMMING TOOLS
DRAGON DROP-IR PROGRAMMING KIT
(1) PCIR1 Programming Module
(1) USB Serial Cable (06500781)
(1) 3-Pin, DB9F Programming Cable (05913778) – 6 feet
(1) 3.5mm Plug-To-Stripped End Cable (06015900) – 5 feet
(1) RS232 Programming Cable, DB9MF (06500616) – 6 feet
(1) DB9MF Null Modem Adapter
(1) Expansion Cable, MRC44, MRAUDIO4X4, BXAUDIO4X4 – (05913560) 2 feet
(1) WaterPad Programming Adapter (05913460-01)
(1) Universal Dragon Drop-IR CD-ROM (03501085-01)
(1) 781ERGPS Power Supply
Accessories
Order: DPKIT
UPC#:4277731380
DRAGON DROP-IR PROGRAMMING TOOL BOX
(1) All the Contents of the DPKIT Plus
(1) RC68X Programmer
(1) 291-10 Desktop IR Receiver
(1) CB12 Connecting Block
(1) 283M Blink-IR Mouse Emitter
(1) Screwdriver Set – 2 piece
(1) Wire Strippers and Cutter
(1) SUNKIT – Sun Filter Kit For IR Receivers
(1) MS1 Mouse Emitter Shield
(1) MW1B, MW1S Mouse Emitter Wire Dressing
(1) Xantech Soft-Style Briefcase
Order: DPTBOX
UPC#:4277731512
RC68X PROGRAMMER
•
•
•
•
•
•
An expanded version of the RC68 programmer with over 14,000 IR codes
Contains all IR codes necessary to operate all Xantech IR controlled components
Use to program universal learning devices, such as Xantech remotes and keypads
IR control code groups are adjustable within many Xantech components
Requires two AA batteries (not included)
Dimensions: 7 1/8” H x 2 5/8” w x 7/8”D (181mm x 67mm x 23mm)
Order: RC68X
78
UPC#:4277731377
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
ACCESSORIES
POWER SUPPLY
• Regulated 12V DC for most Xantech remote control devices (marked rating is 12V DC, 200 mA)
• Powers basic Xantech IR systems
• Uses 2.1mm coaxial plug
Order: 781ERGPS
UPC#:4277731443
FIVE PACK 781RGPS POWER SUPPLY
• Package contains (5) 781RG Power Supplies
Order: 781ERGPS10P
TEN PACK 781RGPS POWER SUPPLY
• Package contains (10) 781RG Power Supplies
Order: 781ERGPS10P
HIGH CURRENT POWER SUPPLY
• Regulated, 12V DC, 1.2 Amp power supply
• Uses 2.1mm coaxial plug
• Power a large number of Xantech devices from a single power supply
Accessories
Order: 781ERGPS5P
Order: 782ERGPS
SMARTPAD LCD POWER SUPPLY
• Steady, regulated, 16V DC, 800 mA power supply for a single SPLCD SmartPad LCD™ Controller
• Available in 120VAC-60 Hz or 240VAC-50 Hz
Order: SPLCDPS1
UPC#:4277731459
HIGH CURRENT SMARTPAD LCD POWER SUPPLY
• Steady, regulated, 16V DC, 3.12A power supply for the SPLCD SmartPad LCD™ Controllers
• Available in 120VAC-60 Hz or 240VAC-50 Hz
• Powers up to four SPLCD SmartPad LCD™ Controllers
Order: SPLCDPS4
UPC#:4277731290
REPLACEMENT BASE STATION AND POWER SUPPLY FOR XTR39
Order: XTR39CRDL
UPC#: 4277731378
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
79
DIGITAL DELIVERY SYSTEM
Multi-room audio distribution offers a lifestyle usually associated with luxury. Bulky electronics and
big box speakers are gone and the freedom of listening to what you want where you want it takes on
a new level. Xantech now introduces an opportunity for versatile multi-room audio distribution to our
faithful customers.
Xantech is proud to present DIGI-5, a Linear Home Technology Group technology. Xantech DIGI-5 is a
complete line of products that are simple to install, CAT5 based system that provides a full featured,
fully distributed digital music system at the price of analog. Systems are configurable for single or
multi-zone concurrent listening in four locations and are expandable to up to 16 locations. The new
platform comes in multiple form factors such as a structure wiring module and an equipment rack
model. Additional features include room EQ and local and shared source switching in each room.
Whole house audio was never so good or so easy to install.
80
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
4 - SOURCE 4 -ZONE KIT - EQUIPMENT RACK
FEATURES:
Digital Delivery System (DDS)
Complete multi-room audio package
Controls up to four sources
Distributes audio up to four zones
30 Watts Digital Amp
Super Bright OLED Display
Studio Slim Design
Fits in Decora Plate
Order: D5RHK
International Version Available
Order: D5RHKE
General Info:
•
•
•
•
(1) Equipment Rack 4x4 Hub
(4) Mini Remotes
(4) DIGI-5 Keypads
(4) 283D Emitters
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
DIGITAL DELIVERY SYSTEM
•
•
•
•
•
•
•
•
81
4 - SOURCE 4 -ZONE KIT - WALL MOUNT KIT
FEATURES:
DIGITAL DELIVERY SYSTEM
•
•
•
•
•
•
•
•
•
•
•
Digital Delivery System (DDS)
Complete multi-room audio package
Controls up to four sources
Distributes audio up to four zones
Sources can be remotely located
Based on Wall Mount hub
Fits most structured wiring systems
30 Watts Digital Amp
Super Bright OLED Display
Studio Slim Design
Fits in Decora Plate
Order: D5SHK4
International Version Available
Order: D5SHK4E
General Info:
•
•
•
•
•
•
•
(1) Wall Mount 4x4 Hub
(1) Wall Mount Power Supply
(4) Mini Remotes
(4) 283D Emitters
(4) DIGI-5 Keypads
(4) Local Source Input Plates
(1) 110 Punch-Down Tool
SINGLE SOURCE 4 -ZONE KIT - WALL MOUNT
FEATURES:
•
•
•
•
•
•
•
•
•
•
•
Digital Delivery System (DDS)
Complete multi-room audio package
Controls a single source
Distributes audio up to four zones
Source can be remotely located
Based on Wall Mount hub
Fits most structured wiring systems
30 Watt Digital Amp
Super Bright OLED Display
Studio Slim Design
Fits in Decora Plate
Order: D5SHK
International Version Available
Order: D5SHKE
General Info:
•
•
•
•
•
•
•
82
(1) Wall Mount 1x4 Hub
(1) Wall Mount Power Supply
(1) Mini Remote
(1) 283D Emitters
(4) DIGI-5 Keypads
(1) Local Source Input Plates
(1) 110 Punch-Down Tool
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
4 - SOURCE 4 - ZONE EQUIPMENT RACK HUB
FEATURES:
Digital Delivery System (DDS)
Digital coax audio inputs
Analog Left & Right audio inputs
Audio input level control
Audio clipping indicators
Serial RS-232 control port
Paging & Doorbell compatible
IR emitter outputs
Zone pairing for combining keypads in a zone
Zone power output for longer distances
Expansion capability
Order: D5RH
International Version Available
Order: D5RHE
General Info:
• ~120V 50/60Hz Power Supply: 240W max.
• Dimensions: 17"W x 14.25"D x 2.41"H
• Optional RM1UKIT rack ears available
6 -ZONE EQUIPMENT RACK EXPANSION HUB
DIGITAL DELIVERY SYSTEM
•
•
•
•
•
•
•
•
•
•
•
FEATURES:
•
•
•
•
•
•
•
Digital Delivery System (DDS)
Audio Loop-Thru connection from master hub
Audio input level control
Serial RS-232 control port
IR emitter outputs
Zone pairing for combining keypads in a zone
Zone power output for longer distances
Order: D5XH
International Version Available
Order: D5XHE
General Info:
• ~120V 50/60Hz Power Supply: 240W max.
• Dimensions: 17"W x 14.25"D x 2.41"H
• Optional RM1UKIT rack ears available
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
83
4 - SOURCE 4 - ZONE WALL MOUNT HUB
FEATURES:
•
•
•
•
•
•
Digital Delivery System (DDS)
4 Source 110 punch-down inputs
4 Zone 110 punch-down outputs
4 Source Loop-Thru, expansion capable
Zone power output for longer distances
Serial RS-232 control port
Order: D5SH4
DIGITAL DELIVERY SYSTEM
General Info:
• Requires D5PS Power Supply
• Requires D5IP Source Input Plate
• Mounting Holes: 6" Width, 4" Height
(structured wiring enclosed compatible)
• Dimensions: 6.50"W x 1.89"D x 6.80"H
SINGLE - SOURCE 4 - ZONE WALL MOUNT HUB
FEATURES:
•
•
•
•
•
•
DIGI-5 Technology
Single Source 110 punch-down inputs
4 Zone 110 punch-down outputs
Single Source Loop-Thru, expansion capable
Zone power output for longer distances
Serial RS-232 control port
Order: D5SH
General Info:
• ~120V 50/60Hz Power Supply: 240W max.
• Dimensions: 17"W x 14.25"D x 2.41"H
• Optional RM1UKIT rack ears available
84
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
WALL MOUNT POWER SUPPLY
FEATURES:
•
•
•
•
•
•
Universal input 100 to 240VAC, 50 to 60Hz
Incredible efficiency (up to 89%)
Standard IEC power cord compatible
Over voltage protection
Over temperature protection
Standard IEC power cord compatible
General Info:
• 24VAC, 8.3A rated
• Intended for Wall Mount hubs
• Mounting Holes: 6” Width, 3” Height
(structured wiring enclosure compatible)
• Dimensions: 6.55"W x 1.74"D x 4.50"H
LOCAL SOURCE INPUT PLATE
DIGITAL DELIVERY SYSTEM
Order: D5PS
Shipped with International power cords
Order: D5PSE
FEATURES:
•
•
•
•
•
Digital coax audio inputs
Analog Left & Right audio inputs
Audio input level control
IR emitter output
RJ45 Connection
Order: D5IP
General Info:
• Decora style, fits into a single-gang box
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
85
DIGITAL DELIVERY SYSTEM KEYPAD AND DIGITAL AMPLIFIER
FEATURES:
DIGITAL DELIVERY SYSTEM
•
•
•
•
•
•
•
•
Digital Delivery System (DDS)
Built-in digital amplifier
Source selection control
Volume level control
Bass, treble, balance control
Back-lit buttons with timeout control
RJ45 Connection
30 Watt Digital Amp
DDS Keypad
Order: D5KP
General Info:
• Decora style, fits into a single-gang box
• Includes a decora gasket for a flush fit
DIGITAL DELIVERY SYSTEM KEYPAD AND DIGITAL AMPLIFIER UK/EU VERSION
FEATURES:
•
•
•
•
•
•
•
Digital Delivery System (DDS)
Built-in digital amplifier
Source selection control
Volume level control
Bass, treble, balance control
Back-lit buttons with timeout control
30 Watt Digital Amp
International Version Available
Order: D5KPE
Coming Soon.
DIGITAL DELIVERY SYSTEM KEYPAD COLOR KIT
FEATURES:
• Includes Additional Screwless Trim Plate & Bezel
• Black, Almond, & Ivory color
• Color Kit for D5KP DDS KEYPAD
Order: D5KCK
86
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
MINI REMOTE
FEATURES:
•
•
•
•
Palm-sized remote control
Source selection functions
Volume control functions
MUTE and POWER functions
Order: D5MR
General Info:
ADVANCED LEARNING REMOTE
FEATURES:
•
•
•
•
•
•
•
Hand-held remote control
Programmable four source
Compatible with all major components
Pre-programmed with DIGI-5 controls
Compatible with all major components
Dedicated DIGI-5 volume and source controls
3 IR macro function buttons
Order: D5LR
General Info:
DIGITAL DELIVERY SYSTEM
• Includes Lithium battery
• Includes batteries
• Built-in IR code library
1U RACK EAR KIT
FEATURES:
• For use with 19" Equipment Rack hubs
• Easy to install
Order: RM1UKIT
General Info:
• Includes left and right ears and hardware
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
87
DIGITAL DELIVERY SYSTEM
NEW HOME AUDIO DISTRIBUTION
Distribute beautiful audio to 4 locations. The master hub is centrally located whereas the source material can be conveniently
placed in the entertainment center. DIGI-5 technology delivers high-power amplification negating the need for special highefficiency speakers.
Product Shown: D5SHK4
88
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
HDTXSG01 - HDRXSG01 System
HDTXSG01
J-box HD Transmitter p27
HDRXSG01
J-box HD Receivers p27
The HDTXSG01-HDRXSG01 System allows
locating an HD Source up to 1000’ away
from an HDTV for a clean uncluttered look.
Diagrams
HD VIDEO DISTRIBUTION DIAGRAM 1
HD VIDEO DISTRIBUTION DIAGRAM 2
HD44CC5 HD Distribution System
HD44CC5
4x4 HD Video/Digital Audio Matrix Switcher p25
HDRXSG01
J-box HD Receivers p27
The HD44CC5 can send any one or all of 4 HD
video sources and digital audio to any one or all
of 4 locations over Cat5 up to 1000’ away with
no discernible video loss, for a whole-house
multi-HD source distribution system.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
89
Diagrams
HD VIDEO DISTRIBUTION DIAGRAM 3
HD44CC5 HD Distribution System
HD44CC5
Four Zone/Source HD Distributor p25
HDRXSG01
J-BOX HD Receivers p27
90
From extreme gaming to HD satellite or cable
TV to Blu Ray movies, the HD44CC5 delivers HD
content up to 1000’ over Cat5 throughout the
home.
The HD44CC5 can also manage, switch and
control up to four HD sources in a home theater
while sharing those HD sources with three
other HD TV’s in separate areas of the home.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Diagrams
HD44CC5/MRAUDIO4X4CTL DIAGRAM
HD44CC5/MRAUDIO4X4CTL
HD44CC5
Four Zone/Source HD Distributor p25
HDRXSG01
J-box HD Receivers p27
MRAUDIO4X4CTL
Four Zone/Source Audio Controller p65
MRC88DJKPW
Dual-Gang Keypad with LCD Display p71
XIS100
Audio Server p75
XT1
AM/FM Tuner p75
283M5P
Mouse Emiter five pack p17
When combined with a MRAUDIO4X4 Four Zone/Four
Source Audio Matrix, the HD44CC5 creates endless
flexibility of system design. One zone can be an audio
only zone for background music, while another zone
receives HD video and speaker level audio while
another zone is a full blown home theater receiving HD
video with digital audio content being pumped through
a local A/V Receiver.
Tremendous flexability, and ease of use, because zone
power, source select, volume and device control is all
controlled from simple and elegant MRC44 Keypads.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
91
HD44CC5/MRAUDIO8X8CTL DIAGRAM
HOME THEATER
Audio Output
HD TV
HD TV
AVR
Digital
Audio
CAT5 Control
HDRXSG01
HDRXSG01
Diagrams
HD Content
AV Input
Serial Control Link
HD44CC5
HD AV Input
HD-DVD
HD-DVR
HD Content
CAT5 Control
CAT5 Control
HDRXSG01
HD TV
Audio Output
HD44CC5/MRAUDIO8X8CTL
HD44CC5
Four Zone/Source HD Distributor p25
HDRXSG01
J-box HD Receivers p27
MRAUDIO8X8m
Eight Zone/Source Audio Controller p67
MRC88DJKPW
Dual-Gang Keypad with LCD Display p71
92
XIS100
Audio Server p74
XT1
AM/FM Tuner p75
When combined with a MRAUDIO8X8
the HD44CC5 provides up to eight zones*
of design flexibility from audio only zones
to full HD Home Theater.
* May require two HD44CC5 units
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
FOUR HD SOURCES DISTRIBUTED TO FOUR AREAS OF THE HOME
Diagrams
.
Send four sources to four different areas of the home over 1000 feet of CAT5
Product Shown: HD44CC5 Matrix Controller & HDRXSG01 Receivers
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
93
Diagrams
BASIC SPLCD APPLICATION DIAGRAM
Speaks Dragon
SPLCD Touchpanel Controller
SPLCD64V
6.4” LCD Touchpanel Controller p36
SPLCDCB100
SPLCD Connecting Block p38
283DM
Blink Mouse Emitter p17
SPLCDPS1
SPLCD Power Supply p38
XTC Reference
XTC Reference In-wall and In-ceiling Speakers p53
94
XIS100
Audio Server p74
XT1
AM/FM Tuner p75
When a Xantech SPLCD64V is used to pilot a
Home Theater System, it provides control of all
equipment and preview of selected source video.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Diagrams
IN-WALL KEYPADS AND REMOTE CONTROLS
Amplifier Control
PA635
Six Channel Power Amplifier with IR Control p61
PM110KITRP
SmartPad3 Dual Gang In-Wall Learning Keypad p39
29110D
Shelf-Top IR Receiver p11
780-10
J-Box IR Receiver p11
The Xantech PA635 Amp has the flexibility to
drive 3 zones of stereo audio @35 watts, 6 mono
channels @ 35 watts or can be bridged to create
3 mono channels @70 watts. The PA635 also has
Built IR volume control so each room can have
discrete volume control
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
95
Diagrams
IN-WALL KEYPADS AND REMOTE CONTROLS
IR Control
PM110KITRP
SmartPad3 In-Wall Learning KeyPad p39
XIS100
Audio Server p74
XT1
AM/FM Tuner p75
XTR39
Hand Held LCD Touchscreen Remote p43
WPK
WaterPad In-Wall KeyPad p42
IR Receivers
Various IR Receivers p5–11
283D
Blink-IR Emitter p17
96
This series of products offers stand alone in-wall
keypads and remote controls that make it easy to
control a home theater or control centrally located
source components in a distributed audio or audio/
video system.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Diagrams
XTR39 - RF2IR SYSTEM DIAGRAM
XTR39 Hand Held LCD Remote/RF2IR RF Module
XTR39
LCD Remote p43
RF2IR
RF to IR Converter p43
XMUSICw+
Audio Server p74
XT1
Dual AM/FM Tuner p75
283D
Blink-IR Designer Emitter p17
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
97
Diagrams
VOLUME CONTROLS AND SPEAKER SELECTORS
SPEAKER SELECTORS
XSSD250W
Speaker Selector p58
XTC Speakers
Xantech Speakers p52
98
Xantech’s XSS24100W Speaker selector
allows simultaneous music distribution
to multiple rooms from a stereo amp with
continuous impedence matching and the
ability to select from two sources.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Diagrams
VOLUME CONTROLS AND SPEAKER SELECTORS
AMPLIFIER/VOLUME CONTROL SYSTEM
PA635
6-Channel Power Amp with IR p61
XVCD100IR
100W Rotary Volume Control With IR p56
XVCS100
100W Slider Volume Control p56
XVCO100
100W Out Door Volume Control p56
XA65C
6.5” XTC Reference Ceiling Speakers p54
XOD65
Xantech Outdoor Speakers p55
Using a Xantech PA635X amp & Volume Controls
as shown, creates a three room system for both
indoors and outdoors. Each volume control includes
a variety of color inserts to match the decor of
each room.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
99
IR CONTROLLED MULTI-CHANNEL AMPLIFIERS
Amplifier Control
PA635
Six Channel IR Amplifier p61
PM110KITRP
SmartPad3 KeyPad Kit p39
29110D
Shelf-Top IR Receiver p11
780-10
J-Box IR Receiver p11
Diagrams
The Xantech PA635 Amp
has the flexibility to drive 3
additional rooms or ‘sub-zones’
of stereo audio @35 watts, 6
mono channels @ 35 watts
or can be bridged to create 3
mono channels @70 watts. The
PA635 also has Built IR volume
control so each room can have
separate volumes.
MULTI-CHANNEL DISTRIBUTION AMPLIFIERS
Amplifier / Volume Control
PA635X
6-Channel Power Amp with IR p62
XVCD100IR
100WIR Rotary Volume Control p56
XVCS100
100W Slider Volume Control p56
XVCO100
100W Outdoor Volume Control p56
Using a Xantech PA635X amp
& Volume Controls as shown,
creates a three room system for
both indoors and outdoors. Each
volume control includes a variety
of color inserts to match the decor
of each room.
100
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
49010D
Micro Link™ IR Receiver Kit
29110D
Hidden Link™ IR Receiver Kit
780-10/RP
J-Box IR Receiver
789-44
Connecting Block
283D
Blink-IR Mouse Emitter
XMUSICw+
Audio Server
XT1
Dual AM/FM Tuner
Diagrams
BASIC IR REPEATER SYSTEM
ZONE A/V SURROUND DISTRIBUTION SYSTEM
XMUSIC
Audio Server XDT Dual AM/FM Tuner
795-20
Four-Zone Amplified Connecting
Block
49095D
Plasma Friendly Micro Link™
IR Receiver
29195D
Plasma Friendly Hidden Link™
IR Receiver
780-95
Plasma Friendly J-Box
IR Receiver
AV61
A/V 6-Way Distribution Amplifier
CB12
One-Zone Connecting Block
282D5P
Mouse Emiter five pack
Application Diagrams intended to illustrate system
capabilities. Additional items may be required.
Contact Xantech technical support for
further information.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
101
SIMPLEIFIED HOME THEATER OPERATION: MAC1 FOR
RELIABLE MACRO ACTIVATION
Diagrams
Single IR Remote commands trigger MAC1 system IR command sequences, eliminating ‘lost codes’ and ‘out of sync’ operation.
XMUSICw+
Audio Server
XD1
791-44
One-Zone Amplified Connecting Block
490-00D
Micro Link™ IR Receiver
29110D
Hidden Link™ IR Receiver
780-10/RP
J-Box IR Receiver
MAC 1
Mini-Macronizer™
283-00
Blink-IR Mouse Emitter
CONTACT CLOSURE A/V AUTOMATION
Perfect for model homes, security integration, etc.
590-10
Programmable Controller
791-44
One-Zone Amplified Connecting Block
599-00
Pulsed Switching Module
282M5P
Mouse Emiter five pack
Application Diagrams intended to illustrate system
capabilities. Additional items may be required.
Contact Xantech technical support for further information.
102
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
XMUSICw+
Audio Server
XD1
Dual AM/FM Tuner
791-44
One Zone Amplified Connecting Block
SPLCD64G
SmartPad LCD Touchpanel
SmartPad3™
In-Wall Learning Keypad System
CC62
Remote Relay Switcher
283D
Blink-IR Mouse Emitters
Diagrams
TOUCH/KEYPAD HOME THEATER CONTROL
MULTI-ROOM SINGLE ZONE IR CONTROL WITH
VIDEO OVER EXISTING COAX
172-94RP
Xtra Link2 Kit
172-94XRP
Xtra Link Expansion Kit a
202-00
Four-Way RF Splitter
203-00
DC Blocker
CABLE/SAT COAX
CABLE/SAT COAX
Application Diagrams intended
to illustrate system capabilities.
Additional items may be required.
Contact Xantech technical support
for further information.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
103
Diagrams
ADVANCED MEDIA ROOM CONTROL
SPLCD64V
SmartPad LCD™ Touchpanel
RS2321X8
Addressable Serial Router
283D
Blink-IR Mouse Emitter
104
28DES
Emitter Shield Cover
RT8
Addressable Router
RS422232
RS422 to 232 Module
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Diagrams
ADVANCED HOME THEATER CONTROL WITH
SECOND ZONE EXPANSION
SPLCD64V
SmartPad LCD™ With Video
SPLCDCB100
Connecting Block
RS2321X8
Addressable Serial Router
IPRS23202
XTRALINK IP™
CC12
Remote Relay Module WPK Waterpad™
WPK
Waterproof Programmable Keypad
XIS100
Audio Server
XT1
AM/FM Tuner
283D
Blink-IR Mouse Emitter
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
105
1 SOURCE 4 ZONE WALL MOUNT HUB
1 SOURCE
4 ZONE
WALL MOUNT HUB
NEW HOME AUDIO
DISTRIBUTION
Central Location
Diagrams
Entertainment Room
Source & Receiver
D5PS
D5IP
Speakers
D5SH
Kitchen
D5KP
Speakers
D5KP
Speaker Wire
Speaker Wire
Dinning Room
Living Room
Speakers
D5KP
Speakers
D5KP
Speaker Wire
106
Speaker Wire
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
4 SOURCE 4 ZONE RACK HUB
4 SOURCE
4 ZONE
RACK HUB
NEW HOME AUDIO
DISTRIBUTION
Sources
D5RH
Diagrams
Satellite
Tuner
Blue Ray
DVD
Room 1
Speakers
D5KP
Room 3 with iPod*
Speakers
iPod*
D5KP
Speaker Wire
Room 2
Speakers
D5KP
Speaker Wire
D5SH
Speaker Wire
Room 4
Speakers
* iPod is a registered trademark of Apple Computer, Inc,
All other marks are redistered trademarks and
trademarks of Xantech Corporation. All rights reserved.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
D5KP
Speaker Wire
107
4 SOURCE 4 ZONE WALL MOUNT
4 SOURCE
4 ZONE
WALL MOUNT HUB
NEW HOME AUDIO
DISTRIBUTION
Sources
Diagrams
Satellite
D5IP
Tuner
D5IP
D5IP
D5IP
Blue Ray
DVD
Room 1
Speakers
D5KP
Central Location
Speaker Wire
Room 2
Speakers
D5KP
D5PS
D5SH
Speaker Wire
Room 3
Room 4
Speakers
D5KP
Speaker Wire
108
Speakers
D5KP
Speaker Wire
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
4 SOURCE 10 ZONE RACK KIT
4 SOURCE
10 ZONE RACK KIT
NEW HOME AUDIO
DISTRIBUTION
Sources
D5RH
Tuner
Room 1
Blue Ray
Room 2
Speakers D5KP
D5KP Speakers
DVD
Speaker Wire
Diagrams
Satellite
Speaker Wire
Expansion Hub
D5XH
Room 3
Room 4
Speakers D5KP
D5KP Speakers
Speaker Wire
Room 5
Speakers D5KP
Speaker Wire
Room 8
Speakers D5KP
Speaker Wire
Room 6
D5KP
Room 7
Speakers
Room 9
D5KP
D5SH
iPod*
Speaker Wire
D5KP
Speaker Wire
Room 10
Speakers
Speaker Wire
D5KP
Speaker Wire
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Speaker Wire
* iPod is a registered
trademark of Apple
Computer, Inc, All other
marks are redistered
trademarks and
trademarks of Xantech
Corporation. All rights
reserved.
109
Xantech
Tel 818/362-0353
Fax 800/349-6832
RESIDENTIAL LITERATURE REQUEST
Customer Name:
Date:
Attn:
Account#
Street:
City:
State:
Part Number
Zip:
Description
OTY
08008029
Technical Sales Training Manual 2006
08008028
Lifestyle Brochure 2005
08008740
Cut Sheet, BXAUDIO4X4 Controller/Amp
08008765
Cut Sheet, MR44CTL/ MRAUDIO4X4CTL
08008755
Cut Sheet, MRC88CTL / MRAUDIO8X8CTL
08008830
Cut Sheet, XTR39 / RF2IR
08008775
Cut Sheet, SPCLD Smartpad
08506115
Cut Sheet, PA Series Amplifiers
08008795
Cut Sheet, RS2321X8 Router
08008805
Cut Sheet, IR Receivers
08008815
Cut Sheet, IR Emitters
08008032
IR Control Guide Tri-Fold
08008850
Cut Sheet Volume Controls
08008750
Cut Sheet, XMUSIC
08008745
Cut Sheet, XDT Dual Tuner
08008820
Cutsheet, ZAKIT
08008853
Cutsheet, IR Ready Kits
08008849
Cutsheet, HD44CC5
08008848
Cutsheet, Smartpad Key Modules
08008854
XTC Series Reference Data Sheet
08008855
XTC Indoor Speaker Series
08008857
XOD Outdoor Speaker Series
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Literature Request Order Form
LITERATURE REQUEST ORDER FORM
Index
II
05913560
05913565
172-94/RP
172-94X/RP
0200-00
0202-00
0203-00
282D
282D10P
282D5P
282TP
282X
283D
283D10P
283D5P
283DW
283TP
284D
284D10P
284D5P
286D
286D10P
286D5P
29110D
29185D
29185DKIT
29195D
29195DKITP
29110DKIT
03016400
38020
39020
48085DS
48085DB
48085DW
48085DBKIT
48085DSKIT
48095DS
48095DB
48095DW
48095DBKIT
48095DSKIT
48010DB,DS,DW
49010D
49085D
49085DKIT
49095D
49095DKIT
0490DW00
49010DKIT
49010D
59010
59800
59900
06015900
06017400
06017440
06017450
68010
68610
78010P
78080
78095
781ERGPS
Null modem cable . . . . . . . . . . . . . . . . . . . . . . . . .72
15-pin to 9-pin expansion cable . . . . . . . . . . . . . . .72
Xtra Link2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09
Xtra Link2 xpansion kit . . . . . . . . . . . . . . . . . . . . . .09
2-way RF splitter. . . . . . . . . . . . . . . . . . . . . . . . . . .19
4-way RF splitter. . . . . . . . . . . . . . . . . . . . . . . . . . .19
DC Blocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Designer Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Designer Emitter 10 Pack . . . . . . . . . . . . . . . . . . . .16
Designer Emitter 5 Pack . . . . . . . . . . . . . . . . . . . . .16
Two Plug Mini emitter. . . . . . . . . . . . . . . . . . . . . . .16
‘Naked’ Mini emitter . . . . . . . . . . . . . . . . . . . . . . . .16
Blink-IR emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Blink-IR emitter 5 Pack . . . . . . . . . . . . . . . . . . . . . .17
Blink-IR emitter 10 Pack . . . . . . . . . . . . . . . . . . . . .17
Blink-IR emitter w/ 6’ 28 gauge cable . . . . . . . . . . .17
Two Plug Mini emitter. . . . . . . . . . . . . . . . . . . . . . .17
Dual mini emitter. . . . . . . . . . . . . . . . . . . . . . . . . . .16
Dual mini emitter 5 Pack . . . . . . . . . . . . . . . . . . . . .16
Dual mini emitter 10 Pack . . . . . . . . . . . . . . . . . . . .16
Dual blink-IR emitter . . . . . . . . . . . . . . . . . . . . . . . .17
Dual blink-IR emitter 5 Pack . . . . . . . . . . . . . . . . . .17
Dual blink-IR emitter 10 Pack . . . . . . . . . . . . . . . . .17
The Hidden Link. . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CFL friendly IR table-top receiver . . . . . . . . . . . . . .08
LCD Proof Hidden Link Kit . . . . . . . . . . . . . . . . . . . .06
Plasma Shelf Top IR Receiver . . . . . . . . . . . . . . . . .07
Plasma Shelf Top IR Receiver Kit . . . . . . . . . . . . . .05
Micro Link Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06
Dark Purple Lens for 780 . . . . . . . . . . . . . . . . . . . .18
IR Blaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Hidden Link IR Blaster . . . . . . . . . . . . . . . . . . . . . . .17
CFL Friendly Adjustable Dinky Link Silver . . . . . . . .08
CFL Friendly Adjustable Dinky Link Black . . . . . . . .08
CFL Friendly Adjustable Dinky Link White . . . . . . . .08
Proof Dinky Link-Black Kit . . . . . . . . . . . . . . . . . . . .06
LCD Proof Dinky Link-Silver Kit . . . . . . . . . . . . . . . .06
Plasma Adjustable Dinky Link Silver . . . . . . . . . . . .07
Plasma Adjustable Dinky Link Black . . . . . . . . . . . .07
Plasma Adjustable Dinky Link White. . . . . . . . . . . .07
Plasma Proof Dinky Link Kit Black . . . . . . . . . . . . . .05
Plasma Proof Dinky Link Kit Solver . . . . . . . . . . . . .05
Dinky Link- Standard IR-Black . . . . . . . . . . . . . . . . .11
Micro Link - Brass . . . . . . . . . . . . . . . . . . . . . . . . . .11
LCD Proof Micro Link . . . . . . . . . . . . . . . . . . . . . . .08
LCD Proof Hidden Link Kit . . . . . . . . . . . . . . . . . . . .06
Plasma Friendly Micro Link . . . . . . . . . . . . . . . . . .07
Plasma-Proof Micro Link IR Kit . . . . . . . . . . . . . . . .05
J-Box Micro Link. . . . . . . . . . . . . . . . . . . . . . . . . . .11
Micro Link Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06
Micro Link-Standard . . . . . . . . . . . . . . . . . . . . . . . .11
Programmable Controller. . . . . . . . . . . . . . . . . . . . .46
Keypad for 590 . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Pulsed Switching Module . . . . . . . . . . . . . . . . . . . .46
5 Foot mini plug cable . . . . . . . . . . . . . . . . . . . . . .18
1-Foot Mono cable . . . . . . . . . . . . . . . . . . . . . . . . .19
Adapter Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
10 Foot Mono Cable . . . . . . . . . . . . . . . . . . . . . . . .19
Remote AC Switcher. . . . . . . . . . . . . . . . . . . . . . . .44
Remote Speaker Switcher. . . . . . . . . . . . . . . . . . . .44
J-box receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CFL friendly IR J-box receiver . . . . . . . . . . . . . . . . .08
Plasma Proof J-Box Receiver . . . . . . . . . . . . . . . . .07
Power Supply Regulated 12 V DC . . . . . . . . . . . . . .19
781ERGPS10P
781ERGPS5P
782ERGPS
78400
78944
78944CB5P
78944DW
78944PSRP
79000
79144
79210
79310
79410
79450
79480
79520
79620
AC1
AC2
AV61
BYPASS94
CB12
CB18
CB20
CB60
CBCSM1
CC12
CC62
CMD1W
CMD4W
CMD6W
CMDBZKIT
COMPAUDEXT
CPLCT
CPLTCX
CSPLCD39RMP
CSPLCD64RMP
D5RHK
D5RHK4
D5SHK
D5RH
D5XH
D5SH4
Power Supply 5 Pack . . . . . . . . . . . . . . . . . . . . . . .19
Power Supply 10 Pack . . . . . . . . . . . . . . . . . . . . . .19
High Current Power Supply . . . . . . . . . . . . . . . . . . .19
Emitter Extension Cable . . . . . . . . . . . . . . . . . . . . .18
Connecting block. . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connecting Block 5-Pack. . . . . . . . . . . . . . . . . . . . .12
In-Wall Connecting block . . . . . . . . . . . . . . . . . . . .12
Connecting block & power supply. . . . . . . . . . . . . .12
Multiple emitter connecting block . . . . . . . . . . . . . .14
Amplified connecting block . . . . . . . . . . . . . . . . . . .12
Power module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Serial control combiner . . . . . . . . . . . . . . . . . . . . . .14
Cable with 3.5mm stereo plug . . . . . . . . . . . . . . . .14
Cable with RCA plug for
Philips, Carver, Marantz, NAD . . . . . . . . . . . . . . . . .14
Cable with 4-pin Sony SIRCS plug. . . . . . . . . . . . . .14
Four zone amplified connecting block . . . . . . . . . . .13
Six-zone connecting block/expander. . . . . . . . . . . .13
Controlled AC Outlet . . . . . . . . . . . . . . . . . . . . . . . .44
Controlled AC Outlet . . . . . . . . . . . . . . . . . . . . . . . .44
6-way AV distribution amp . . . . . . . . . . . . . . . . . . .77
Bypass Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09
One zone connecting block . . . . . . . . . . . . . . . . . . .15
“The Strip-IR” Parallel connecting block . . . . . . . . .15
One zone connecting block . . . . . . . . . . . . . . . . . . .13
One zone connecting block . . . . . . . . . . . . . . . . . . .13
Current Sensor Connecting Block . . . . . . . . . . . . . .46
Remote relay module . . . . . . . . . . . . . . . . . . . . . . .44
Remote relay module . . . . . . . . . . . . . . . . . . . . . . .44
Single Source Cursor Module . . . . . . . . . . . . . . . . .40
Four Source Cursor Module. . . . . . . . . . . . . . . . . . .40
Six Source Cursor Module . . . . . . . . . . . . . . . . . . .40
Cursor Module Color Bezel Kits . . . . . . . . . . . . . . . .40
Point to Point component audio extender . . . . . . . .28
Coax to optical converter . . . . . . . . . . . . . . . . . . . .30
Optical to coax digital converter . . . . . . . . . . . . . . .30
SPLCD39 Rack Mount . . . . . . . . . . . . . . . . . . . . . . .38
SPLCD64 Rack Mount . . . . . . . . . . . . . . . . . . . . . . .38
Complete 4x4 Rack Kit . . . . . . . . . . . . . . . . . . . . . .81
Complete 4x4 Structured Wiring Kit . . . . . . . . . . . .82
Complete 1x4 Structured Wiring Kit . . . . . . . . . . . .82
4x4 Equipment Rack Hub . . . . . . . . . . . . . . . . . . . .83
Expansion Equipment Rack Hub . . . . . . . . . . . . . . .83
4X4 Wall Mount Hub. . . . . . . . . . . . . . . . . . . . . . . .84
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
1x4 Wall Mount Hub . . . . . . . . . . . . . . . . . . . . . . . .84
Efficient Wall Mount Power Supply. . . . . . . . . . . . .85
Local Source Input Wall Plate . . . . . . . . . . . . . . . . .85
DDS Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Mini Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Advanced Learning Remote . . . . . . . . . . . . . . . . . .87
Doorbell Communicator, Bronzed Black. . . . . . . . . .73
Doorbell Communicator Hub . . . . . . . . . . . . . . . . . .73
Doorbell Communicator, Stainless Steel . . . . . . . . .73
Doorbell Paging Controller . . . . . . . . . . . . . . . . . . . .73
Dragon Programming Kit . . . . . . . . . . . . . . . . . . . . .78
Dragon Programmers Tool Box . . . . . . . . . . . . . . . .78
SmatrPad3 DeskTop Mount Black. . . . . . . . . . . . . .42
SmatrPad3 DeskTop Mount White . . . . . . . . . . . . .42
SPLCD39 Desk Top Mount Black. . . . . . . . . . . . . . .38
SPLCD39 Desk Top Mount White . . . . . . . . . . . . . .38
SPLCD64 Desk Top Mount Black. . . . . . . . . . . . . . .38
SPLCD64 Desk Top Mount White . . . . . . . . . . . . . .38
Single gang expansion module . . . . . . . . . . . . . . . .39
PM110 Single Gang Expansion Kit . . . . . . . . . . . . .39
Zone Expander Cable Kit . . . . . . . . . . . . . . . . . . . . .76
Component video Amplifier . . . . . . . . . . . . . . . . . . .29
Four Zone/Source HD Video Distribution . . . . . . . . .25
Four Zone/Source HD Video Distribution
w/ Cat5 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
HDCXSG01
HD Single Gang CoAx termiantion. . . . . . . . . . . . . .27
HDRXSG01
HD Single Gang Cat5 Receiver Box . . . . . . . . . . . . .27
HDMI06FTLCK
6ft SECURE-LOCK Cable . . . . . . . . . . . . . . . . . . . . .31
HDMI10FTLCK
10ft SECURE-LOCK Cable . . . . . . . . . . . . . . . . . . . .31
HDMI15FTLCK
15ft SECURE-LOCK Cable . . . . . . . . . . . . . . . . . . . .31
HDMI1X2
1in 2 out HDMI Splitter . . . . . . . . . . . . . . . . . . . . . .22
HDMI1X4
1in 4out HDMI Splitter. . . . . . . . . . . . . . . . . . . . . . .21
HDMI3X1
3in 1out HDMI Switcher . . . . . . . . . . . . . . . . . . . . .21
HDMI4X1
4in 1out HDMI Switcher . . . . . . . . . . . . . . . . . . . . .20
HDMI4X4
4in 4out HDMI True Matrix Switcher. . . . . . . . . . . .20
HDMIBOOST
HDMISignal Booster . . . . . . . . . . . . . . . . . . . . . . . .22
HDMIBOOST050FT 50ft HDMISignal Booster Cable. . . . . . . . . . . . . . . .32
HDMIC5IR
Point to point HDMI extender over CAT5 with IR . .24
HDMIEXTEND
Point to point HDMI extender over CAT5 . . . . . . . .23
HDMIEMITTER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
HDMIEXTIR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
HDMIF2DV IF
HDMI female to DVI female adaptor . . . . . . . . . . . .32
HDMIF2DV IM
HDMI female to DVI male adaptor . . . . . . . . . . . . .32
HDMIM2DV IF
HDMI male to DVI female adaptor . . . . . . . . . . . . . .32
HDTXSG01
HD Single Gang Cat5 Transmitter Box. . . . . . . . . . .27
INJ94
RF/IR Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09
IPRS2320
Xtra LinkIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
IRDY10KITRP
10 Source IR Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .10
IRDY4KITRP
4 Source IR Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
IRS232A
IR to RS232 Module . . . . . . . . . . . . . . . . . . . . . . . .45
IR-X10
Lighting Module . . . . . . . . . . . . . . . . . . . . . . . . . . .45
ISM4
System controller . . . . . . . . . . . . . . . . . . . . . . . . . .48
KMD1W
Single Source Key Module . . . . . . . . . . . . . . . . . . .40
KMDBZKIT
Key Module Color Bezel Kits . . . . . . . . . . . . . . . . . .40
MRC44DJKPA
MRC44 / MRAUDIO4X4 / BXAUDIO4X4 Keypad . . .71
MRC88DJKA
MRC88 / MRAUDIO8X8 Keypad . . . . . . . . . . . . . . .71
LM110RP
Smart Pad3 Expansion Module . . . . . . . . . . . . . . . .39
LM110KITRP
SmartPad3 Single-Gang Learning Module Kit RP. . .39
MAC1
Mini-Macronizer . . . . . . . . . . . . . . . . . . . . . . . . . . .46
MMD1W
Single Source Master Module . . . . . . . . . . . . . . . . .41
MMD2W
Two Source Master Module . . . . . . . . . . . . . . . . . .41
MMD4W
Four Source Master Module . . . . . . . . . . . . . . . . . .41
MMD6W
Six Source Master Module . . . . . . . . . . . . . . . . . . .41
MMD8W
Eight Source Master Module. . . . . . . . . . . . . . . . . .41
MMDBZKIT
MRAUDIO4X4m
MRAUDIO8X8m
MRC44CB1
MRC44CTL
MRC44DJKP
MRC88m
MRC88DJKP
MRCKPSP
MRCREMRP
28DEJ
MRWC
MW1B
MW1S
PA1235
PA1235X
PA4100X
PA435X
PA635
PA635X
PM110/RP
PM110KITRP
RAT1
RC68X
RF2IR
RGC11
RM2UKIT
RMEXP
RMZPR
RP41AV
RS2321X8
RS232IR
RS41AV
RS422232
RT1610
RT8
SLLC1
SMAUD01
SMCC01
SMLIT01
SMMAG01
SMVID01
SMVLT01
SPLCD39BOX
SPLCD39BZA
SPLCD39BZBK
SPLCD39BZBN
SPLCD39BZBR
SPLCD39BZI
SPLCD39BZW
SPLCD39GW
SPLCD64BOX
SPLCD64BZA
SPLCD64BZBK
SPLCD64BZBN
SPLCD64BZI
SPLCD64BZW
SPLCD64GW
SPLCD64VW
SPLCDCB100
SPLCDPS1
SPLCDPS4
Master Module Color Bezel Kits . . . . . . . . . . . . . . .41
Multi-Room Audio Controler . . . . . . . . . . . . . . . . . .65
Multi-Room Audio Controler . . . . . . . . . . . . . . . . . .67
MRC44 Connecting Block . . . . . . . . . . . . . . . . . . . .72
Four-Source Four-Zone A/V Controller. . . . . . . . . . .66
MRC88 Dual Gang Keypad . . . . . . . . . . . . . . . . . . .71
Eight-Source Eight Zone Controller . . . . . . . . . . . . .68
MRC88 Dual Gang Keypad . . . . . . . . . . . . . . . . . . .71
Keypad Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Hand held MRC Remote . . . . . . . . . . . . . . . . . . . . .72
Mouse Emitter shield cover. . . . . . . . . . . . . . . . . . .18
Ethernet MRC/MRA controller . . . . . . . . . . . . . . . .74
Emitter Wire Dressing-Black . . . . . . . . . . . . . . . . . .18
Emitter Wire Dressing-Silver . . . . . . . . . . . . . . . . . .18
12-Channel Power Amplifier with IR Control . . . . . .61
12-Channel Power Amplifier . . . . . . . . . . . . . . . . . .62
100 Watt Four-Channel Power Amplifier. . . . . . . . .62
4-Channel Power Amplifier . . . . . . . . . . . . . . . . . . .62
6-Channel Power Amplifier . . . . . . . . . . . . . . . . . . .61
6-Channel Power Amplifier . . . . . . . . . . . . . . . . . . .62
Smart Pad3 Programmable Module. . . . . . . . . . . . .39
SmartPad3 Double-Gang Learning Module Kit RP . .39
IR controlled Remote Auto Transformer . . . . . . . . .57
IR Remote Programmer. . . . . . . . . . . . . . . . . . . . . .78
RF to IR Converter Module . . . . . . . . . . . . . . . . . . .43
Remote Gain control module . . . . . . . . . . . . . . . . . .44
HD44 Rack Mount Kit . . . . . . . . . . . . . . . . . . . . . . .25
Rack Mount for EXP-9 . . . . . . . . . . . . . . . . . . . . . . .76
Rack Mount for ZPR68-10 . . . . . . . . . . . . . . . . . . . .76
Remote control 4 AV source preamp. . . . . . . . . . . .77
Eight-Port Serial Router . . . . . . . . . . . . . . . . . . . . . .45
RS232 to IR Module . . . . . . . . . . . . . . . . . . . . . . . .45
IR Remote Control A/V switcher . . . . . . . . . . . . . . .77
RS422 to RS232 Module. . . . . . . . . . . . . . . . . . . . .38
Addressable IR Router. . . . . . . . . . . . . . . . . . . . . . .15
One x Eight Addressable IR Router . . . . . . . . . . . . .15
Speaker Line Level Converter . . . . . . . . . . . . . . . . .72
Sensor Module-Audio . . . . . . . . . . . . . . . . . . . . . . .47
Sensor Module-Contact Closure . . . . . . . . . . . . . . .47
Sensor Module-Light . . . . . . . . . . . . . . . . . . . . . . . .47
Sensor Module-Magnetic . . . . . . . . . . . . . . . . . . . .47
Sensor Module-Video . . . . . . . . . . . . . . . . . . . . . . .47
Sensor Module-Voltage . . . . . . . . . . . . . . . . . . . . . .47
3.9” LCD Touchpanel Back Box. . . . . . . . . . . . . . . .37
3.9” LCD Touchpanel Bezel - Almond . . . . . . . . . . .37
3.9” LCD Touchpanel Bezel - Black . . . . . . . . . . . . .37
3.9” LCD Touchpanel Bezel - Brown . . . . . . . . . . . .37
3.9” LCD Touchpanel Bezel - Brass . . . . . . . . . . . . .37
3.9” LCD Touchpanel Bezel - Ivory. . . . . . . . . . . . . .37
3.9” LCD Touchpanel Bezel - White. . . . . . . . . . . . .37
3.9” Graphic Touch Display Controller. . . . . . . . . . .36
6.4” LCD Touchpanel Back Box. . . . . . . . . . . . . . . .37
6.4” LCD Touchpanel Bezel - Almond . . . . . . . . . . .37
6.4” LCD Touchpanel Bezel - Black . . . . . . . . . . . . .37
6.4” LCD Touchpanel Bezel - Brown . . . . . . . . . . . .37
6.4” LCD Touchpanel Bezel - Ivory. . . . . . . . . . . . . .37
6.4” LCD Touchpanel Bezel - White. . . . . . . . . . . . .37
6.4” Graphic Touch Display Controller. . . . . . . . . . .36
6.4” SmartPad LCD Controller . . . . . . . . . . . . . . . . .36
Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . . .38
Power Supply for LCD Touchscreen
Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
High Current Power Supply for LCD Touchscreen
Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Index
D5SH
D5PS
D5IP
D5KP
D5MR
D5LR
DCCB B
DCH4
DCSS
DPC100
DPKIT
DPTBOX
DTMSP3B
DTMSP3W
DTMSPLCD39B
DTMSPLCD39W
DTMSPLCD64B
DTMSPLCD64W
EM110/RP
EM110KITRP
EXP1524
HD16D
HD44C
HD44CC5
III
Index
IV
SR21
SUNKIT
URC-2B
URC-2P
URC-2P/RP
WPK1
WPK4
WPK6
WPK8
XA65C
XA65CS
XA65W
XA8C
XA8W
XB525C
XB525W
XB65C
XB65CS
XB65W
XB8C
XB8W
XBKT525C
XBKT525W
XBKT650C
XBKT650W
XBKT800C
XBKT800W
XC65C
XC65CS
XC65W
XCARD
XT1
XIS100
XOD65
XOVP14
XSS24100W
XSS26100W
XSSD2100W
XSSD250W
XTR39
XTR39 BTRY
XTR39CRDL
XVC100
XVC50P
XVCD100
XVCD100IR
XVCD50P
XVCE100IR
XVCS100
XVCS100IR
XVCS50
XVCO100
ZA8REC
ZAKIT
ZATRAN
ZC21
ZPR68-10
Remote A/B Speaker Relay module. . . . . . . . . . . . . . . . . 59
Sunscreen filter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Programmable Learning Remote-Black . . . . . . . . . . . . . . 42
Programmable Learning Remote-Platinum . . . . . . . . . . . 42
Programmable Learning Remote-Platinum . . . . . . . . . . . 42
WaterPad- 20 function buttons . . . . . . . . . . . . . . . . . . . . 42
WaterPad- 4 Banks / 16 function buttons . . . . . . . . . . . . 42
WaterPad- 6 Banks / 14 function buttons . . . . . . . . . . . . 42
WaterPad- 8 Banks / 12 function buttons . . . . . . . . . . . . 42
XTC Reference 6.5”ceiling. . . . . . . . . . . . . . . . . . . . . . . . 53
XTC Reference 6.5” stereo ceiling. . . . . . . . . . . . . . . . . . 53
XTC Reference 6.5” In-wall . . . . . . . . . . . . . . . . . . . . . . . 54
XTC Reference 8”ceiling . . . . . . . . . . . . . . . . . . . . . . . . . 53
XTC Reference 8” In-wall . . . . . . . . . . . . . . . . . . . . . . . . 54
XTC 5.25” Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
XTC 5.25” Wall Speaker . . . . . . . . . . . . . . . . . . . . . . . . . 52
XTC 6.5” Ceiling Speaker . . . . . . . . . . . . . . . . . . . . . . . . 51
XTC 6.5” Ceiling Stereo Speaker . . . . . . . . . . . . . . . . . . . 51
XTC 6.5” Wall Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . 52
XTC 8ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
XTC Grade 8” Wall Speaker. . . . . . . . . . . . . . . . . . . . . . . 52
5.25” Ceiling Rough In Bracket . . . . . . . . . . . . . . . . . . . . 51
5.25” In-wall Rough In Bracket . . . . . . . . . . . . . . . . . . . . 52
6.5” Ceiling Rough In Bracket . . . . . . . . . . . . . . . . . . . . . 51
6.5” In-wall Rough In Bracket . . . . . . . . . . . . . . . . . . . . . 52
8” Ceiling Rough In Bracket . . . . . . . . . . . . . . . . . . . . . . 51
8” In-wall Rough In Bracket. . . . . . . . . . . . . . . . . . . . . . . 52
XC 6.5” Ceiling Speaker . . . . . . . . . . . . . . . . . . . . . . . . . 50
XC 6.5” Ceiling Stereo Speaker . . . . . . . . . . . . . . . . . . . . 50
XC 6.5” Wall Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Zone Expander Card for EXP9 . . . . . . . . . . . . . . . . . . . . . 76
Dual AM/FM Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
IPOD Solution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Weather resistant outdoor speaker . . . . . . . . . . . . . . . . . 55
RS232 Port Expansion Module . . . . . . . . . . . . . . . . . . . . 38
Two Source, Four Zone Speaker Selector . . . . . . . . . . . . 58
Two Source, Six Zone Speaker Selector . . . . . . . . . . . . . 58
Source A/B Selector and Speaker Selector/Combiner . . .59
A/B Speaker or Source Selector . . . . . . . . . . . . . . . . . . . 58
XTR39 Hand-held LCD remote . . . . . . . . . . . . . . . . . . . . . 43
XTR39 Replacement Battery . . . . . . . . . . . . . . . . . . . . . . 43
XTR39 cradle and Power Supply . . . . . . . . . . . . . . . . . . . 43
100W Rotary Volume Control . . . . . . . . . . . . . . . . . . . . . 56
50W Rotary Volume Control . . . . . . . . . . . . . . . . . . . . . . 56
100W Rotary Decora Volume Control . . . . . . . . . . . . . . . 56
100W IR Rotary Decora Volume Control . . . . . . . . . . . . . 56
50W Rotary Decora Volume Control . . . . . . . . . . . . . . . . 57
100 Watt Electronic Volume Control . . . . . . . . . . . . . . . . 57
100W Decora Slider Volume Control . . . . . . . . . . . . . . . . 56
100W IR Decora Slider Volume Control. . . . . . . . . . . . . . 56
50W Decora Slider Volume Control . . . . . . . . . . . . . . . . . 57
100W Outdoor Volume Control . . . . . . . . . . . . . . . . . . . . 57
Zone Audio Kit Audio Receiver . . . . . . . . . . . . . . . . . . . . 72
Zone Audio Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Zone Audio Kit Audio Transmitter . . . . . . . . . . . . . . . . . . 72
Two zone connecting block . . . . . . . . . . . . . . . . . . . . . . . 13
Six Zone Eight Source Preamp . . . . . . . . . . . . . . . . . . . . 76
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
STANDARD TERMS AND CONDITIONS
Dealers
Net 30 on approved credit
Dealers
$50.00 minimum purchase order (product only, no accessories included)
Each order stands alone; no additional items may be added after PO is transmitted
XANTECH CORPORATION DEALER RETURN POLICY
Xantech will not accept unauthorized products for repairs or returns.
To request a Return Authorization (RA) please contact Xantech Tech Support Department at 800 843-5465 and follow auto attendant prompts.
IN WARRANTY PRODUCT
Products sold by Xantech Corporation are covered under the Limited Warranty Policy printed in the Xantech Price Sheet. This Policy covers parts and
labor on all products for one full year from the date of purchase unless stated otherwise in the warranty statement. Xantech Corporation has a repair or
replace policy with respect to defective product within the warranty period. Items that cannot be repaired will be replaced at no charge to the dealer.
A Return Authorization (RA) is required for In Warranty Product. Dealer must provide documentation in the form of proof of purchase i.e., copy of
invoice at the time of return request. All In-Warranty products returned for repair will be inspected for damage/abuse upon receipt at Xantech. Product
deemed abused by Xantech will be subject to repair charges at the discretion of the inbound Inspector. DOA Products: Xantech will Repair or Replace
initial failure units at its discretion. In the event of an advanced replacement unit is sent, the Dealer will be charged for the replacement unit. When
the defective unit is returned it will be inspected. If found to be defective Xantech will issue a Credit to the Dealer account. Returned product that is
cosmetically damaged or missing parts will be issued a Credit less the cost of repairing the damage or replacing the missing parts. If the DOA unit
is inspected and no problem is found (NPF) it will be returned to the dealer and no Credit issued. See Details section below for shipping information,
product listing requiring Technical Support Pre-Authorization and other critical information. Xantech will return product to dealer via UPS at no charge.
If product inspected is determined not to be defective i.e., No Problem Found (NPF) it will be returned to the dealer via UPS. UPS charges will be billed
to the dealers account. If a dealer or distributor ships units to Xantech with an approved RA via expedited freight, Xantech will return the repaired or
replaced item using the same shipping methodology. (Ex;UPS Red inbound, UPS Red return to customer).
OUT OF WARRANTY PRODUCT
A Return Authorization (RA) is required for Out Of Warranty Product. Out Of Warranty product sent in for repair will be inspected by Xantech
Corporation. An estimate indicating the cost of parts and labor to repair the product will be provided to the dealer prior to the commencement of any
work. Dealer will be required to approve the estimate via email or fax. If the unit is deemed not to be repairable it will be sent back to the dealer.
Repaired product will be returned to the dealer via UPS. UPS charges will be billed to the dealers account. Hourly rate for repair is $60.00.
NEW PRODUCT RETURNS/STOCK BALANCE REQUESTS
New product being returned for stock balance requests will incur a 20% Restocking Charge. The Restocking Charge will be waived if the request
for return is made within thirty (30) days of purchase. All Authorized products issued with a Return Authorization (RA) for Credit will be subject
to inspection. Returned product must be in brand new factory sealed boxes, in the current sales catalog and in fully resalable condition. Xantech
Corporation will not authorize product returns/exchanges after 120 days. Product returned in poor condition will be rejected and sent back to the dealer
via UPS. UPS charges will be billed to the dealers account.
DETAILS
PACKAGING RETURN SHIPMENT
Product being returned to Xantech Corporation for In Warranty or Out Of Warranty repair will need to be packaged securely in order to avoid damage.
All PA amplifiers, MRC Controllers and SPLCD Touch panels will need to be returned in its original Xantech box with packing in order to avoid
damaging the product in-transit. Products received at Xantech in sub-standard packaging will not be serviced. Xantech will send you an appropriate
box to return product if requested. There will be a charge for this service.
TECHNICAL SUPPORT PRE-AUTHORIZATION
Certain products require a Pre-Authorization from our Technical Support Department prior to a Return Authorization (RA) being issued. Please call our
Technical Support Department at 800 843-5465 and Press 2 to for tech support, if you have a problem with any of the following products: Any MRC
Controller or Keypad, SmartPad LCD (any model), ZPR68 (any version), 49090, 78090, any PA series amplifier, PM110, LM110, WPK (any version),
DD4, Gate KeepIR (any version), RT8, RT16, RAT1, URC2 (any version), MAC1, IRS232, IRS232A, RS232IR, RS2321X8, Xtralink-IP 172 series, 590-10,
710-00, 730-00, XDT, PMX/LMX , and BXAUDIO. Technical Support will transfer your call to the Sales Department to complete the ATR process.
SHIPPING LABEL REQUIRED
All authorized products returned to Xantech for Repair or Return must have a Xantech Return Authorization (RA) Shipping Label taped to the outside of
the box. Returns sent without this label will be refused at the dock. A copy of the RA must be placed inside the box. These documents will be sent to
the dealer via email or fax.
TIME LIMIT TO RETURN
When a Return Authorization (RA) is issued a dealer or distributor will have 30 days from that date to return the product to Xantech. The RA will be
cancelled and product refused at the dock after the 30-day window elapses.
Xantech Corporation reserves the right to accept or refuse any request for repair or credit based on, but not limited to: Past Due Accounts, Unresolved
Credit Issues, Legal Action or abuse of the stated Return Policy. Policies, Rules, Regulations and Restrictions are subject to change at any time.
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
V
© 2009 Xantech Corporation. All rights reserved.
This document is copyright protected. No part of this document may be copied or reproduced in any form without prior written
consent from Xantech Corporation.
Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.
Due to constant product improvements, all specifications and prices subject to change without notice.
In exchange for the use of this [Master Catalog and Price Book], you agree to use the information within only [as necessary in your
business], to treat all information within as confidential and with the same degree of security and confidentiality with which you
maintain your own confidential information, and not to divulge any information within to others except as necessary to conduct
your business. For instance, you may not copy any part of the [Master Catalog and Price Book] and disclose it to others.
The confidentiality restrictions will be more enforceable if the transmission documentation gives an option for those not accepting
the confidentiality restrictions, such as “If you are unwilling or unable to comply with these confidentiality provisions, please
destroy the price book or return it to us.”
“Made for iPod” means that an electronic accessory has been designed to connect specifically
to iPod and has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of the device or its compliance with safety and regulatory
standards. iPod is a trademark of Apple Inc. registered in the U.S. and other countries.
VI
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
VII
2009 Catalog
PN#08008043
1
13100 Telfair Ave., Sylmar CA 91342 l 818.362.0353 l xantech.com
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement