Omron V680 - 2 Product manual
Reklāma
Reklāma
NEW
RFID System
V680 Series
Next-Generation RFID System
Conforming to ISO/IEC 18000-3
(ISO/IEC 15693).
New ID Sensor Units for CJ1/CS1 PLCs and New M12 Antenna.
Visualize data transmission on production lines.
Managing process instructions and histories for engine manufacturing
Managing manufacturing process traceability
Managing the manufacture of LCDs and color filters
Managing dies, die histories, and die service lives
Versatile Functions for Optimal
Use on Production Lines
Conforms to ISO/IEC 18000-3
(ISO/IEC 15693)
Can be used in many countries around the world.
The V680 Series can be used in many parts of the world because it meets the requirements of radio wave regulations in Japan, Europe, the U.S.A., Canada, Mexico, Singapore, Malaysia, the Philippines, China, Hong
Kong, Taiwan, and Korea. Contact your OMRON sales representative for details on use in other countries.
Note: The requirements of radio wave regulations have been met in the countries listed above for combinations of a V680-HA63A or V680-HA63B
Amplifier and a V680-HS52, V680-HS63, or V680-HS65 Antenna (application pending in Mexico). The V680-CH and V680-H01 Antennas and combinations of a V680-HA63A or V680-HA63B Amplifier and a V680-HS51 Antenna meet the requirements of radio wave regulations in Japan, Europe, the U.S.A., and Canada. Application is in progress in other countries.
Enables High-speed Data Transmission
High-speed transmission of 27 kbps achieved.
The V680 Series offers data transmission speeds as high as 27 kbps at an operating frequency of 13.56 MHz, and dramatically shortens turn around time (TAT) with a Self-execution Mode that eliminates the need for host access.
Self-execution system Conventional system
ID Tag transmission time
Judgment and instruction
TAT
Host send (command) time
Host send (response) judgment and instruction time
ID Tag transmission time
TAT
Judgment and instruction
A Wide Range of ID Tags Available for Various Production Lines
These ultra-compact Tags also feature high environmental durability, long service lives, and maintenance-free operation.
ID Tags can be either embedded in metal or mounted on non-metallic objects without requiring any extra attachments.
A long service life enables 10 billion accesses.
A new battery-less model with a large, 32-Kbyte capacity has been added to the line-up.
In addition to managing the growing amount of production and quality data on today's factory floors, this new Tag makes it easy to build a system with traceability.
The V680 Series features the same level of environmental durability as the previous V600 Series.
10
billion accesses
Long service life Battery-less
No Changes Needed when Switching from an Existing System
The V680 Series also supports V600-series commands, so there is no need to change command systems.
Easier Startup and Maintenance.
Simpler Operation.
Lets You Visualize Data Transmission
Contributes to higher efficiency for on-site startup and maintenance.
Seven maintenance modes make it easy to diagnose the optimal usage conditions for the V680 RFID System.
Startup is also easier because the system can be checked without having to use a personal computer or other host device.
Maintenance modes are quickly switched with the DIP switch on the front of the Controller.
The Amplifier Unit is also equipped with an indicator that displays the communications condition, for easy confirmation from the location nearest the production line.
Strong Support for Creating ID Tag Memory Maps
Using the ID Map Manager dramatically shortens the time required to allocate
ID Tag memory and complete system designs.
Work efficiency is greatly increased because the ID Map Manager includes an ID Tag read/write test function and communications checking function in addition to memory map definition and editing functions.
Memory map data created by the ID Map Manager can also be easily shared between the production line design department and the vendors that are building the line.
V680-A-IMMEG-P01
Visualize Data Transmission without the Need for a Host Device.
Perform Simple Diagnosis of Communications Conditions.
Distance Level Measurement Mode
Confirms correct mounting positions for the Read/Write Antenna and ID Tag.
The distance between the Read/Write Antenna and ID Tag mounting locations relative to the communications range is displayed using six levels.
Distance level “--”
Controller Amplifier Unit
ID Tag
“01”
“02”
“03”
“04”
“05”
“06”
Read/Write
Antenna
Distant Close
Noise Level Measurement Mode
Confirms spatial noise, noise sources, and noise countermeasure effects.
Measures the ambient noise level and displays it in levels ranging from 00 to 99.
Controller
Read/Write
Antenna
Little noise Much noise
Speed Level Measurement Mode (Read/Write)
Confirms the speed of moving ID Tags and the number of usable bytes.
Data is transmitted repeatedly to moving ID Tags, and the number of successful communications and speed level are displayed in levels ranging from 01 to 99.
(No data is actually written to the ID Tags during the write part of the Speed Level Measurement Mode.)
Controller
Movement
ID Tag
Read/Write
Antenna
More than 99 successful communications
Seven maintenance modes make it easy to diagnose the communications conditions from the front panel of the Controller or Amplifier Unit. The data can also be output from the USB port of the Controller to a personal computer or other monitoring device.
(Maintenance Mode cannot be used with the V680-H01 or V680-CH.)
Communications Success Rate Measurement Mode
Confirms the communications success rate between the Read/Write Antenna and ID Tags.
A total of 100 communications are executed without retries, and the rate of communications success is displayed in levels ranging from 01 to 99.
Controller
ID Tag
100 communications
Read/Write
Antenna
Communications successes: 23
Host Device Communications Monitor Mode (Protocol Analyzer Function)
This mode can be used as a protocol analyzer function for host device communications lines.
The communications commands sent from the host device and the execution result responses can be output from the USB port of the Controller.
Host device
Monitor
Command:
RDSTH100100010*CR
Monitor:
RDSTH100100010*CR
RD72*CR
Read/Write
Antenna
Personal computer Programmable Controller
(PLC)
Response:
RD72*CR
Notebook PC
Tag Communications Test Mode
Confirms communications ability between the Read/Write
Antenna and ID Tags.
The end codes are displayed to show the results of communications between the Read/Write Antenna and ID Tags. When the Controller is mounted inside a control panel, or in some other location, this data can be output from the Controller's USB port and easily checked on a monitor.
(The Tag Communications Test Mode uses only read operations.)
Controller
Normal communication Communications error
Host Device Communications Confirmation Mode
Confirms whether the signals sent from the Controller are being correctly transferred to an external device.
The communications commands and responses between the Controller and a host device are output from the
Controller's USB port for easy identification of problems, such as incorrect communications parameters or wiring.
RFID System
V680 Series
New, Next-generation
RFID Systems with ISO/IEC 18000-3
(ISO/IEC15693) Compliance
• High-speed, 27-kbps transmission response-only speed of 53 kbps from the V680-D @KF68.
• Read/Write Antennas and ID Tags with excellent environmental resistance.
• Wide line-up of ultra-compact, long-life ID Tags, with capacities from 1 to 32 Kbytes.
• Seven modes make it possible to visualize data transmission.
• ID Map Manager simplifies memory map designing for
ID Tags.
• Complies with FCC Standards and R&TTE Directive.
System Configuration
ID Tag
1-Kbyte memory
V680-D1KP52MT
(8 dia.
× 5 mm)
For embedding in metallic or non-metallic surface
Read/Write Antenna
Cylinder type
V680-HS52
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34
× 34 × 3.5 mm)
For flush mounting on metallic surface
1-Kbyte memory
V680-D1KP66T-SP
(96
× 36.5 × 6.5 mm)
For flush mounting on non-metallic surface
-W:
-R:
Standard cable, waterproof connector
Flexible cable, non-waterproof connector
Cylinder type
V680-HS51
Amplifier Unit
For
1-Kbyte ID Tags
V680-HA63A
Controller
1-channel type
V680-CA5D01-V2
Amplifier Unit
Special Extension
Cable
V700-A43/-A44
2-channel type
V680-CA5D02-V2
Host Device
Personal
computer
Programmable
Controller
2-Kbyte memory
V680-D2KF52M
(8 dia.
× 5 mm)
For embedding in metallic or non-metallic surface
Square type
V680-HS63
For 2-, 8-, or
32-Kbyte ID Tags
V680-HA63B
Communications interfaces
RS-232C, RS-422,
RS-485
ID Sensor Units
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40
× 40 × 4.5 mm)
For flush mounting on non-metallic surface
CJ1W-V680C11/C12
CS1W-V680C11/C12
SYAMAC
CJ/CS Series
V680-HS65
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86
× 54 × 10 mm)
For flush mounting on non-metallic surface
-W:
-R:
Standard cable, waterproof connector
Flexible cable, non-waterproof connector
Amplifier Unit
Special Extension
Cable
V700-A43/-A44
Note 1. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be performed if a V680-
HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
2. For details, refer to the following User’s Manuals (Cat. No. Z248, Z249, Z262, and Z274).
3. The maximum total cable length is 62.5 m. It is achieved by connecting an Antenna with a 12.5-m cable, an Amplifier with a 10-m cable, and 20-m Amplifier
Unit Special Extension Cables.
6
V680 Series
RFID System
ID Tag
1-Kbyte memory with high-temperature capability
V680-D1KP58HT
Read/Write Antenna
V680-H01
Controller
1-channel type
V680-CA5D01-V2
Communications interfaces
RS-232C, RS-422,
RS-485
ID Sensor Units
1-channel type
CJ1W-V680C11
CS1W-V680C11
Host Device
Personal computer
Programmable
Controller
SYAMAC
CJ/CS Series
Special Cable
V700-A40-W
1-Kbyte memory
V680-D1KP52MT
V680-D1KP66MT/
V680-D1KP66T
V680-D1KP66T-SP
Handheld Reader Writer
V680-CH1D-PSI
RS-232C interface
(Connector)
Psion Teklogix 7527S-series
Handheld Terminal for
V680-CH1D-PSI
(Recommended model:
V680-A-7527S-G2-EG-S)
V680-CHUD
USB interface
Personal computer
2-Kbyte memory
V680-D2KF52M
V680-D2KF67M/
V680-D2KF67
V680-CH1D
V600-A22 AC Adapter
(order separately)
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
RS-232C interface
(Connector)
Programmable
Controller
System Configuration
Connect V680 Read/Write Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to V680-series ID Tags.
Transmission is also possible with ID Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693).
However, transmission with ID Tags other than those of the V680 Series cannot be assured. The user must confirm transmission capabilities carefully prior to use.
V680 Series
RFID System
7
Ordering Information
ID Tag
Type
Battery-less
Memory capacity
1 Kbyte
Appearance Size
Cylindrical, ultra-compact
8 dia.
× 5 mm
Square
34
× 34 × 3.5 mm
Metallic compatibility Model
For embedding in metallic or non-metallic surface
V680-D1KP52MT
V680-D1KP66MT For flush mounting on metallic surface
For flush mounting on non-metallic surface
V680-D1KP66T
Square PFA package
95
× 36.5 × 6.5 mm
For flush mounting on non-metallic surface
V680-D1KP66T-SP
2 Kbytes
8 Kbytes
32 Kbytes
80 dia.
× t10 mm
(High-temperature type)
Cylindrical, ultra-compact
8 dia.
× 5 mm
Square
40
× 40 × 4.5 mm
86
× 54 × 10 mm
For flush mounting on non-metallic surface
V680-D1KP58HT
For embedding in metallic or non-metallic surface
V680-D2KF52M
For flush mounting on metallic surface
V680-D2KF67M
For flush mounting on non-metallic surface
For flush mounting on non-metallic surface
V680-D2KF67
V680-D8KF68
V680-D32KF68
Read/Write Antenna (Detachable Amplifier Unit Type)
Cylindrical
Type
Standard cable, waterproof connector
Flexible cable, nonwaterproof connector
Standard cable, nonwaterproof connector
Appearance Size
M22
× 65 mm
M12
× 35 mm
Cable length
2 m
12.5 m
2 m
12.5 m
2 m
Model
V680-HS52-W 2M
V680-HS52-W 12.5M
V680-HS52-R 2M
V680-HS52-R 12.5M
V680-HS51 2M
Square Standard cable, waterproof connector
Flexible cable, nonwaterproof connector
Standard cable, waterproof connector
Flexible cable, nonwaterproof connector
40
× 53 × 23 mm
100
× 100 × 30 mm
2 m
12.5 m
2 m
12.5 m
2 m
12.5 m
2 m
12.5 m
Read/Write Antenna with Built-in Amplifier
Type Appearance
Square
Size
250
× 200 × 35 mm
Cable length
0.5 m (See note.)
V680-HS63-W 2M
V680-HS63-W 12.5M
V680-HS63-R 2M
V680-HS63-R 12.5M
V680-HS65-W 2M
V680-HS65-W 12.5M
V680-HS65-R 2M
V680-HS65-R 12.5M
V680-H01
Model
Note: Use an Antenna Cable to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m.
8
V680 Series
RFID System
Amplifier Unit
For 1-Kbyte memory
Type
For 2-/8-/32-Kbyte memory
Appearance Size
25
× 40 × 65 mm
5 m
Cable length
10 m
5 m
10 m
Model
V680-HA63A 5M
V680-HA63A 10M
V680-HA63B 5M
V680-HA63B 10M
Note: The maximum extendable cable length is 50 m (including the Amplifier Unit cable). The maximum number of V700-A43/-A44 Amplifier Unit
Special Extension Cables that can be connected is two.
Controller
Type Appearance Size Transmission interface Model
DC power supply
No. of connectable
Amplifiers
Single 105
× 90 × 65 mm
RS232C,
RS422/RS485
V680-CA5D01-V2
Dual V680-CA5D02-V2
ID Sensor Units
Type Unit name
CJ1
Special
I/O Unit
Connected ID System
V680 Series 1 Head
2 Heads
External power supply
---
No. of unit numbers used
Current consumption (A)
5 V 24 V External
1 unit number 0.26
---
2 unit number 0.32
0.13
(See note.)
0.26
---
Model
CJ1W-
V680C11
CJ1W-
V680C12
Type
CS1
Special
I/O Unit
Unit name Connected ID System
V680 Series 1 Head
2 Heads
External power supply
---
24 VDC
No. of unit numbers used
1 Head
Current consumption (A)
5 V 26 V External
0.26
0.13
(See note.)
---
2 Heads 0.32
--0.36
Model
CS1W-
V680C11
CS1W-
V680C12
Note: When connected to the V680-H01: 0.28 A
Handheld Reader Writers
Name
Model with USB connector and 0.8-m cable
Model with USB connector and 1.9-m cable
Model with RS-232C connector and 2.5-m cable
(for use with a personal computer or programmable controller)
Model with RS-232C connector and 0.8-m cable
(Recommended: Psion Teklogix Handheld Terminal)
AC Adapter (for V680-CH1D)
Psion Teklogix Handheld Terminals
Handheld Terminal Set
Name
Handheld Terminal Set
(English OS)
Psion Teklogix model number
7527S-G2-EG-S
OMRON model number
V680-A-7527S-G2-EG-S
Model
V680-CHUD 0.8M
V680-CHUD 1.9M
V680-CH1D
V680-CH1D-PSI
V600-A22
Set contents
Handheld Terminal, RS-232C interface, hand strap, and charger
(standard model)
V680 Series
RFID System
9
Accessories (Order Separately)
ID Tag Attachment
Type
For the V680-D1KP66T
Appearance
V600-A86
Model
For the V680-D
@KF68
V680-A81
To mount the V680-D1KP58HT V680-A80
Amplifier Unit Special Extension Cable (Amplifier Unit to Controller)
10 m
Cable length Appearance Model
V700-A43 10 M
20 m V700-A44 20 M
V680-H01 Read/Write Antenna Special Cable (Read/Write Antenna to Controller)
Cable length Appearance
2 m
5 m
10 m
20 m
30 m
Model
V700-A40-W 2M
V700-A40-W 5M
V700-A40-W 10M
V700-A40-W 20M
V700-A40-W 30M
Note: The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two cables together.)
RS-232C Communications Connector
Name Model
ID Map Manager (for Windows)
Type Model
Connector Plug XM3B-0922-111
English version V680-A-IMMEG-P01
Connector Hood XM2S-0911
Note: An RS422/RS485 Communications Connector is provided with the RFID System.
10
V680 Series
RFID System
Ratings and Performance
ID Tag (1-Kbyte Memory)
Item
Memory capacity
Model V680-D1KP52MT
1,000 byte (user area)
V680-D1KP66T V680-D1KP66MT
Memory type
EEPROM
Data backup time (See note 1.) 10 years after writing (85
°C max.)
Memory longevity
100,000 times per block (at 25
°C)
Ambient operating temperature
(during transmission)
−25 to 85°C (with no icing)
Ambient operating temperature
(not during transmission)
−40 to 125°C (with no icing)
Heat resistance: 1,000 thermal cycles each of 30 minutes at
−10°C/150°C, Hightemperature storage: 1,000 hours at 150
°C (See note 2.)
200 thermal cycles each of 30 minutes at
−10°C/180°C, Hightemperature storage: 200 hours at 180
°C (See note 3.)
Ambient storage temperature
−40 to 125°C (with no icing)
V680-D1KP66T-SP
−25 to 70°C (with no icing)
−40 to 110°C (with no icing)
Ambient operating humidity
Degree of protection
Vibration resistance
−40 to 110°C (with no icing)
35 to 95%
IEC 60529, IP68 IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to
IP67g) (See note 4.)
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s
15 minutes each
2
acceleration with 10 sweeps in X, Y, and Z directions for
Shock resistance
Appearance
Materials
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
8 dia.
× 5 mm
Case: PPS resin
Filling: Epoxy resin
Approx. 0.5 g
34
× 34 × 3.5 mm
Molding: PPS resin
95
× 36.5 × 6.5 mm
(excluding protrusions)
External resin: PFA
Tag body: PPS resin
Approx. 20 g
Weight
Approx. 6 g Approx. 7.5 g
Metallic compatibility
Yes No Yes No
Note 1. Refer to the User's Manual (Cat. No. Z262) for data backup time for temperatures of 85
°C or higher. If the V680 has been stored at 125°C or higher, write the data again even if the data does not need to be changed.
2. 150
°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked through testing 1,000 thermal cycles each of 30 minutes at
−10/150°C. (Test samples: 22, defects: 0)
3. 180
°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked through testing 200 thermal cycles each of 30 minutes at
−10°C/180°C. (Test samples: 22, defects: 0)
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
5. For details, refer to the User's Manual (Cat. No. Z262).
ID Tag with 1-Kbyte Memory with High-temperature Capability
Item
Memory capacity
Memory type
Model
1,000 byte (user area)
EEPROM
V680-D1KP58HT
Data backup time
Memory longevity
10 years after writing (See note.)
100,000 times per block (at 85
°C)
−10 to 85°C (with no icing)
Ambient operating temperature
(during transmission)
Ambient operating temperature
(not during transmission)
−40 to 110°C (with no icing)
Heat resistance: 2,000 thermal cycles each of 30 minutes at room temperature/200
°C (Refer to Heat
Resistance, below, for details.)
Ambient storage temperature
−40 to 110°C (with no icing)
Ambient operating humidity
No limits.
Degree of protection
Vibration resistance
Shock resistance
Materials
IEC 60529, IP67
10 to 2,000 Hz, 3.0-mm double amplitude at 150 m/s
15 minutes each
2
acceleration with 10 sweeps in X, Y, and Z directions for
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
PPS resin
Weight
Approx. 90 g
Note: The data storage time at high temperatures (110 to 200
°C) is 10 hours. Rewrite the data before 10 hours has lapsed.
V680 Series
RFID System
11
Heat Resistance
Sufficient heat resistance has been confirmed by evaluation testing comprising 2,000 thermal cycles each of 30 minutes at room temperature/
200
°C (Criterion: LTPD 10%).
The lifetime of the V680-D1KP58HT is affected by high-temperature storage, due to the effects of high temperatures on internal components. For details on the relationship between heat resistance and lifetime, refer to the User's Manual (Cat. No. Z221).
ID Tag (2-Kbyte Memory)
Item
Memory capacity
Model V680-D2KF52M
2,000 bytes (user area)
V680-D2KF67 V680-D1KF67M
Memory type
FRAM
Data backup time (See note 1.) 10 years after writing (55
°C or less)
Memory longevity
Ambient operating temperature
10 billion times per block. Access frequency (See note 2.): 10 billion times
−25 to 85°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35 to 95% 35 to 85%
Degree of protection
IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Vibration resistance
Shock resistance
Appearance
Materials
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s
2
acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
8 dia.
× 5 mm
Case: PPS resin
Filling: Epoxy resin
40
× 40 × 4.5 mm
Molding: ABS resin
Filling: Epoxy resin
Approx. 0.5 g Approx. 6.5 g Approx. 7 g
Weight
Metallic compatibility
Yes No
Note 1. Refer to the User's Manual (Cat. No. Z248) for data backup time for temperatures of 55
°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
Yes
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
ID Tag with 8-/32-Kbyte Memory
Item
Memory capacity
Model V680-D8KF68
8,192 bytes (user area)
V680-D32KF68
32,744 bytes (user area)
Memory type
FRAM
Data backup time (See note 1.) 10 years (at 70
°C max.) after data is written
Memory longevity
10 billion times per block at 85
°C max. Access frequency (See note 2.): 10 billion times
Ambient operating temperature
−20 to 85°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35 to 85%
Degree of protection
Vibration resistance
Shock resistance
Dimensions
Materials
IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
10 to 500 Hz, 1.5-mm double amplitude at 100 m/s
2
acceleration with 10 sweeps in X, Y, and Z directions for
11 minutes each
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
86
× 54 × 10 mm
Case: PBT resin
Filling: Epoxy resin
Weight
Metallic compatibility
Approx. 50 g
No
Note 1. Refer to the User’s Manual (Cat. No. Z248) for data backup time for temperatures of 70
°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
12
V680 Series
RFID System
Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type)
Item
Ambient operating temperature
−10 to 60°C (with no icing)
Ambient storage temperature
−25 to 75°C (with no icing)
Ambient operating humidity
Insulation resistance
Model V680-HS52-W
(Standard Cable, Waterproof
Connector)
35% to 95% (with no condensation)
V680-HS52-R
(Flexible Cable, Non-waterproof
Connector)
20 M
Ω min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
V680-HS51
(Standard Cable, Non-waterproof
Connector)
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
Vibration resistance
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.)
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s
2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
10 to 2,000 Hz variable vibration, 1.5mm double amplitude at 150 m/s 2 acceleration, with 10 sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance
500 m/s 2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
Materials
Weight
M22
× 65 mm
ABS, brass, epoxy resin filling
Approx. 850 g (with 12.5-m cable)
1,000 m/s 2 in X, Y, and Z directions 3 times each (18 times in total)
M12
× 35 mm
Approx. 55 g (with 2-m cable)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Square Read/Write Antenna (Detachable Amplifier Unit Type)
Item
Model V680-HS63-W
(Standard Cable, Waterproof Connector)
Ambient operating temperature
−10 to 60°C (with no icing)
Ambient storage temperature
−25 to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
Dielectric strength
V680-HS63-R
(Flexible Cable, Non-waterproof Connector)
20 M
Ω min. (at 500 VDC) between the cable terminals and the case
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.)
Vibration resistance
Shock resistance
Appearance
Materials
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s 2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
40
× 53 × 23 mm
ABS, epoxy resin filling
Weight
Approx. 850 g (with 12.5-m cable)
Item
Model V680-HS65-W
(Standard Cable, Waterproof Connector)
Ambient operating temperature
−25 to 70°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
Dielectric strength
V680-HS65-R
(Flexible Cable, Non-waterproof Connector)
20 M
Ω min. (at 500 VDC) between the cable terminals and the case
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.)
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s
2
acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each
Shock resistance
Appearance
Materials
Weight
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
100
× 100 × 30 mm
ABS, epoxy resin filling
Approx. 1,100 g (with 12.5-m cable)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
V680 Series
RFID System
13
Square Read/Write Antenna with Built-in Amplifier
Item Model
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient storage temperature
−35 to 65°C (with no icing)
Ambient operating humidity
35% to 85% (with no condensation)
Ambient storage humidity
Insulation resistance
Dielectric strength
Degree of protection
V680-H01
35% to 95% (with no condensation)
20 M
Ω min. (at 100 VDC) between the back plate and the case
1,000 VAC (50/60 Hz) for 1 minute between the back plate and the case with a current leakage of 1 mA max.
Vibration resistance
Shock resistance
Weight
Cable length
IEC 60529: IP63 (Mounting direction: Transmission surface facing up)
10 to 150 Hz variable vibration, 0.7-mm double amplitude with 4 sweeps in X, Y, and Z directions for 8 minutes each
150 m/s
2
in X, Y, and Z directions 3 times each
Approx. 900 g
0.5 m (See note 1.)
Note 1. Use an Antenna Cable to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two cables together.)
2. For details, refer to the User’s Manual (Cat. No. Z221).
Amplifier Unit
Item Model V680-HA63A
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient storage temperature
−25 to 65°C (with no icing)
Ambient operating humidity
Insulation resistance
Dielectric strength
V680-HA63B
35% to 85% (with no condensation)
20 M
Ω min. (at 500 VDC) between the cable terminals and the case
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
Vibration resistance
IP40 (IEC60529) (See note 1.) IP67/IP65 (IEC60529) (See note 2.)
Shock resistance
Appearance
Material
Weight
Cable length
Transmittable ID Tags
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s
2 and Z directions for 11 minutes each
acceleration, with 10 sweeps in X, Y,
500 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
25
× 40 × 65 mm (not including projections)
Polycarbonate (PC) resin
Approx. 650 g (with 10-m cable)
5 m, 10 m (See note 3.)
1-Kbyte memory 2-, 8-, 32-Kbyte memory
Note 1. When connected to the V680-HS63-R or V680-HS52-R.
2. When connected to the V680-HS63-W or V680-HS52-W. (Not including the Connector on the Controller.)
3. The maximum extendable cable length is 50 m (including the Amplifier Unit Cable). The maximum number of cables that can be connected is two.
4. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
14
V680 Series
RFID System
Controller
Item
Power supply voltage
Power consumption
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Insulation resistance
Dielectric strength
Degree of protection
Vibration resistance
Shock resistance
Appearance
Material
Weight
Mounting method
Connectable Amplifier Units
Model V680-CA5D01-V2
24 VDC (
−15% to +10%)
15 W max., 0.8 A max.
−10 to 55°C (with no icing)
25% to 85% (with no condensation)
−25 to 65°C (with no icing)
25% to 85% (with no condensation)
20 M
Ω min. (at 500 VDC) applied as follows:
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
1,000 VAC (50/60 Hz) for 1 minute
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
V680-CA5D02-V2
Panel mounted (equivalent to IP20)
10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s
2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
150 m/s
2
105
× 90 × 65 mm (not including projections)
Polycarbonate (PC) resin, ABS resin
Approx. 300 g
DIN Track or M4 screws
1 2
Note: For details, refer to the User's Manual (Cat. No. Z249).
ID Controller Communications Specifications
Transmission method
Transmission speed
Data length
Stop bit length
Error detection
Cable length
Item
Connector specifications
Specifications
Half-duplex serial
RS-232C
9,600/19,200/38,400/115,200 bps
RS-422/RS-485
9-pin D-Sub connector with threaded socket:
M2.6
5-pin connector mfd. by Phoenix Contact:
MC1.5/5GF-3.5
4-wire/2-wire half-duplex serial
7 or 8 bits
1 or 2 bits
Parity (even/odd/none)
15 m max.
500 m max.
ID Controller Input Specifications
(RST, TRG1, and TRG2)
Input voltage
24 VDC (+10% to
−15%, including ripple)
(PNP and NPN compatible)
Input impedance
2.2 k
Ω
Input current
10 mA TYP (24 VDC)
ON voltage
OFF voltage
Input response
19 V min.
5 V max.
70 ms max.
ID Controller Output Specifications
(RUN, BUSY/OUTS, ERROR/OUT4, OUT1, and OUT2)
Maximum switching capacity
24 VDC (+10% to
−15%, including ripple)
100-mA photoMOS output (PNP and NPN compatible)
Leakage current
100
µA max.
Residual voltage
2.0 V max.
Note 1. When RST input is ON, the CPU halts operation and the RST
LED lights. The ERROR output is then reset.
2. Short-circuiting in a no-load condition may cause transistor damage.
■ USB Port
The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.
V680 Series
RFID System
15
ID Sensor Units
Item
Current consumption
Model
Internal: 5 V
Internal:
24 V/26 V
CJ1W-V680C11
260 mA
130 mA (See note.)
CJ1W-V680C12
320 mA
260 mA
CS1W-V680C11
260 mA
125 mA (See note.)
CS1W-V680C12
320 mA
---
Ambient operating temperature
External: 24 V
---
Dielectric strength
Insulation resistance
1,000 VAC for 1 minute
20 m
Ω min. at 500 VDC
0 to 55
°C
Ambient operating humidity
10% to 90% (with no condensation)
Ambient storage temperature
−20 to 75°C
Degree of protection
Mounted in panel (IP30)
Vibration resistance
10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s
2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance
Appearance
147 m/s
2
---
in X, Y, and Z directions 3 times each
31
× 65 × 90 mm (excluding protrusions)
---
35
360 mA
× 130 × 101 mm (excluding protrusions)
Note: When connected to the V680-H01: 280 mA
Functional Specifications of ID Sensor Units
Item
Communications control protocol
Model CJ1W-V680C11 CJ1W-V680C12
Special protocol for CS1 and CJ1 PLCs
CS1W-V680C11 CS1W-V680C12
Number of Read/Write Head connections
1
Commands
Data transfer quantity
Diagnostic function
(1) CPU watchdog timer
2
(2) Communications error detection with ID Tag
(3) Antenna power supply error
1 2
Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check,
Number of Writes Control, Copy, Read with Error Correction/Write with Error Correction, UID Read, and Noise
Measurement.
The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO repeat (See note.), Multi-access trigger, and Multi-access repeat (See note.)
2,048 bytes max. (160 bytes/scan)
Monitoring/testing functions
Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
Number of allocated words
10 words 20 words 10 words 20 words
Note 1. Cannot be used for communications with the V680-D1KP @@.
2. For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Handheld Reader Writers
Item Model
Power supply voltage
V680-CHUD 0.8M
5 VDC±5%
V680-CHUD 1.9M
V680-CH1D V680-CH1D-PSI
Current consumption
Insulation resistance
500 mA max. (for a power supply voltage of 5.0 V)
50 M
Ω min. (at 500 VDC) between connector and case
1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
Dielectric strength
Vibration resistance
Shock resistance
Destruction: 10 to 150 Hz, 0.2-mm double amplitude, with 10 sweeps for 8 min each in 6 directions
Destruction: 150 m/s
2
, 3 times each in X, Y, and Z directions
0 to +40
°C
Ambient operating temperature during communication
Ambient operating humidity during communication
35% to 85% (with no condensation)
Ambient storage temperature
−25 to +65°C
Ambient storage humidity
35% to 85% (with no condensation)
Degree of protection
IEC 60529: IP63 (See note 2.)
Cable length
Weight
0.8 m
Approx. 110 g
(including connector and cable)
1.9 m
Approx. 140 g
(including connector and cable)
2.5 m
Approx. 170 g
(including connector and cable)
0.8 m
Approx. 120 g
(including connector and cable)
Note 1. Refer to the User's Manual (Cat. No. Z272) for details.
2. This does not include the connector section. The main unit is not resistant to chemical or oils.
16
V680 Series
RFID System
AC Adapter (for V680-CH1D)
Item Model
Input voltage
Input current
Output voltage
Ambient operating temperature
Ambient storage temperature
100 to 120 VAC at 50/60 Hz
100 VAC: 200 mA ±20%, 120 VAC: 170 mA ±20%
5 VDC ±0.25 V
0 to 40
°C (with no icing)
−40 to 70°C (with no icing)
V600-A22
Ambient operating humidity
25% to 85% (with no condensation)
Insulation resistance 100 M
Ω min. (at 500 VDC) between input terminals and output terminals
Dielectric strength
1,500 V for 1 minute between input terminals and output terminals with a current leakage of 5 mA max.
Weight
Approx. 85 g
Applicable standards UL/CSA
Host Communications Interface
Specifications
USB interface
Item Model
Interface connector
Series A plug
USB version
Communications speed
Device class
V680-CHUD
Ver 1.1
Full speed (12 Mbps)
COM class (See note.)
Note: Used as the COM port on the host device.
RS-232C interface
Item Model
Connector
V680-CH1D
D-SUB 9-pin
(compatible with IBM
PC/AT or compatible)
(See note 1.)
Standards
Transmission path connections
RS-232C
1:1
V680-CH1D-PSI
D-SUB 9-pin
Communications method
2-wire half-duplex
Synchronization
Start-stop (stop bits = 1 or 2) (See note 2.)
Baud rate
2,400, 4,800, 9,600, 19,200, or 38,400 bps (See note 2.)
Transmission code
ASCII (7-bit) or JIS8 (See note 2.)
Communications control procedure
1:1 protocol
Error detection
Vertical parity (even, odd, or none) (See note 2.)
Note 1. To convert to a 25-pin connector, use the Sunhayato SGC-X9P/25P-2 or the equivalent.
2. Set using a setting command.
■ Psion Teklogix Handheld Terminals Recommended for the V680-CH1D-PSI
A V680-CH1D-PSI Psion Teklogix Handheld Terminals is recommended for the V680 Handheld Reader Writer. This Handheld Terminal is available from OMRON.
■ Ordering Information
Psion Teklogix Handheld Terminals
Handheld Terminal Set
Name
Handheld Terminal Set
(English OS)
Psion Teklogix model number
7527S-G2-EG-S
OMRON model number
V680-A-7527S-G2-EG-S
Configuration
Handheld Terminal, RS-232C interface, hand strap, and charger (standard model)
Handheld Terminal Only
Name
Handheld Terminal
(English OS)
Appearance Size Psion Teklogix model number
OMRON model number
90 × 210 × 42 mm
7527S-G2-EG V680-A-7527S-G2-EG
Configuration
Handheld Terminal,
RS-232C interface, and hand strap
V680 Series
RFID System
17
Handheld Terminal Accessories
Name
High-capacity Battery
Appearance Size
55 × 35 × 18 mm
Charger
(standard model)
Adapter: 48 × 70 × 27 mm
Cable: 1,800 mm
Charger
(advanced model)
Carrying Case
Psion Teklogix model number OMRON model number
WA3006 V680-A-WA3006
CA1053 V680-A-CA1053
Charger: 168 × 185 × 110 mm
Enclosed USB cable: 1,500 mm
Handheld Reader Writer Cover:
85 × 200 × 50 mm
Strap: 150 mm
WA4003
WA6197
V680-A-WA4003
V680-A-WA6197
18
V680 Series
RFID System
■ Ratings and Specifications
Psion Teklogix Handheld Terminal
Model Psion Teklogix model 7527S-G2-EG
(V680-A-7527S-G2-EG)
Item
OS
OS language
CPU
Memory
Display
Keyboard
Card slots
Windows CE 5.0
English
EXA2705 (520 MHz)
Flash ROM: 128 MB, RAM: 128 MB
Color, 1/4 VGA, 240×320
Alphanumeric
One CF (Type II Compact Flash) slot and one SD memory card slot
Power supply (main battery) One high-capacity lithium ion battery (3,000 mA/h at 3.7 V)
RS-232C (Can be connected to the V680-CH1D-PSI.)
Host communications interface
Ambient operating temperature
−10 to 50°C
Ambient operating humidity
5% to 95% (with no condensation)
Ambient storage temperature
−40 to 60°C
Drop strength
Degree of protection
1.5 m on concrete
IP65 (IEC 60529)
Dimensions
Weight
Standards
210 × 90 × 42 mm
390 g (excluding battery)
CE, UL 60950-1, CSA C22.2 No. 60950-1 CCC, and RoHS (AC Adapter for the charger)
Note: The Easy Access demonstration software is preinstalled on the V680 and V600.
Charger (Standard Model)
Item
Input voltage
Input current
Ambient operating temperature
Ambient storage temperature
Insulation resistance
Dielectric strength
Weight
Applicable standards
Model Psion Teklogix model CA1053
(V680-A-CA1053)
100 to 240 VAC at 50/60 Hz
0.6 A
−10 to 50°C
−25 to 65°C
2 k
Ω
450 V
Approx. 362 g
UL/CSA, CE
V680 Series
RFID System
19
■ Performance Specifications
ID Tag (1-kbyte Memory) Transmission
Recommended combination
ID Tag Read/Write Antenna
V680-D1KP52MT V680-HS52
Function Transmission distance
(unit: mm)
Read distance
0 to 9.0 mm
(axial deviation
±2)
ID Tag and Read/Write Antenna mounting conditions
V680-D1KP52MT
V680-HS52
Write distance
0 to 8.5 mm
(axial deviation
±2)
V680-HS51 Read distance
Write distance
0.5 to 6.5 mm
(axial deviation
±2)
0.5 to 6.0 mm
(axial deviation
±2)
Metallic
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-D1KP52MT
Non-metallic
(Resin, plastic, wood, etc.)
V680-
HS51
V680-D1KP52MT
(embedded in metallic surface: steel)
V680-HS52 Read distance
0 to 4.5 mm
(axial deviation
±2)
Metallic
V680-HS52
Write distance
0 to 4.0 mm
(axial deviation
±2)
Non-metallic
V680-D1KP52MT
V680-HS51 Read distance
0.5 to 3.5 mm
(axial deviation
±2)
Metallic
V680-
HS51
Write distance
0.5 to 3.5 mm
(axial deviation
±2)
Metallic
V680-D1KP52MT V680-HS63 Read distance
0 to 12.0 mm
(axial deviation
±2)
V680-D1KP52MT
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
Write distance
0 to 9.5 mm
(axial deviation
±2)
V680-
D1KP52MT
Non-metallic
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the
User's Manual (V680-D1KP
@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
20
V680 Series
RFID System
Recommended combination
ID Tag Read/Write Antenna
V680-D1KP66T V680-HS52
Function Transmission distance
(unit: mm)
Read distance
0 to 17.0 mm
(axial deviation
±2)
(See note 2.)
Write distance
V680-HS63 Read distance
0 to 17.0 mm
(axial deviation
±2)
(See note 2.)
0 to 30.0 mm
(axial deviation
±10)
(See note 2.)
Write distance
0 to 25.0 mm
(axial deviation
±10)
(See note 2.)
ID Tag and Read/Write Antenna mounting conditions
V680-D1KP66T
V680-HS52
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS65 Read distance
V680-
D1KP66T
Non-metallic
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
Write distance
0 to 47.0 mm
(axial deviation
±10)
(See note 2.)
0 to 42.0 mm
(axial deviation
±10)
(See note 2.)
V680-D1KP66MT
(flush-mounted on metallic surface: steel)
V680-HS52 Read distance
0 to 16.0 mm
(axial deviation
±2)
Metallic
V680-
D1KP66T
V680-D1KP66MT
V680-HS52
Write distance
0 to 14.0 mm
(axial deviation
±2)
V680-HS63 Read distance
0 to 25.0 mm
(axial deviation
±10)
Non-metallic
Metallic
V680-HS63
Metallic
Write distance
0 to 20.0 mm
(axial deviation
±10)
V680-HS65 Read distance
V680-
D1KP66MT
Non-metallic
V680-HS65
Write distance
0 to 25.0 mm
(axial deviation
±10)
0 to 20.0 mm
(axial deviation
±10)
Metallic
V680-
D1KP66MT
Metallic
V680 Series
RFID System
21
Recommended combination
ID Tag Read/Write Antenna
V680-D1KP66T-SP V680-HS52
Function Transmission distance
(unit: mm)
Read distance
0 to 17.0 mm
(axial deviation
±2)
V680-HS63
Write distance
Read distance
0 to 17.0 mm
(axial deviation
0 to 30.0 mm
(axial deviation
±2)
±10)
ID Tag and Read/Write Antenna mounting conditions
V680-D1KP66T-SP
Non-metallic
(Resin, plastic, wood, etc.)
V680-
HS52
Non-metallic
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
Write distance
0 to 25.0 mm
(axial deviation
±10)
V680-
D1KP66T-SP
Non-metallic
V680-HS65 Read distance
0 to 47.0 mm
(axial deviation
±10)
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
Write distance
0 to 42.0 mm
(axial deviation
±10)
V680-
D1KP66T-SP
Metallic
V680-D1KP58HT V680-H01 Read distance
0 to 150 mm
(See note.)
V680-H01
V680-D1KP58HT
Write distance
Non-metallic
(Resin, plastic, wood, etc.)
Nonmetallic
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the
User's Manual (V680-D1KP @@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
22
V680 Series
RFID System
ID Tag (2-kbyte Memory) Transmission
Recommended combination
ID Tag Read/Write Antenna
V680-D2KF52M V680-HS52
Function Transmission distance
(unit: mm)
Read distance
0 to 8.0 mm
(axial deviation
±2)
Write distance
V680-HS51
V680-D2KF52M
(embedded in metallic surface: steel)
V680-HS52
V680-D2KF52M
V680-HS51
V680-HS63
Read distance
Write distance
Read distance
Write distance
Read distance
Write distance
Read distance
0 to 8.0 mm
(axial deviation
±2)
0.5 to 5.5 mm
(axial deviation
±2)
0.5 to 5.5 mm
(axial deviation
±2)
0 to 3.0 mm
(axial deviation
±2)
0 to 3.0 mm
(axial deviation
±2)
0 to 3.5 mm
(axial deviation
±2)
0 to 3.5 mm
(axial deviation
±2)
0 to 9.5 mm
(axial deviation
±2)
ID Tag and Read/Write Antenna mounting conditions
V680-D2KF52M
Metallic
Metallic
V680-HS52
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-D2KF52M
Non-metallic
(Resin, plastic, wood, etc.)
V680-
HS51
V680-HS52
Non-metallic
V680-D2KF52M
V680-
HS51
Metallic
Metallic
V680-D2KF52M
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
Write distance
0 to 9.5 mm
(axial deviation
±2)
V680-D2KF67 V680-HS52
Non-metallic
V680-
D2KF52M
V680-D2KF67
V680-HS63
V680-HS65
Read distance
Write distance
Read distance
Write distance
Read distance
Write distance
0 to 17.0 mm
(axial deviation
±2)
(See note.)
0 to 17.0 mm
(axial deviation
±2)
(See note.)
7 to 30.0 mm
(axial deviation
±10)
(See note.)
7 to 30.0 mm
(axial deviation
±10)
(See note.)
0 to 42.0 mm
(axial deviation
±10)
(See note.)
0 to 42.0 mm
(axial deviation
±10)
(See note.)
V680-HS52
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-
D2KF67
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680-
D2KF67
Metallic
V680 Series
RFID System
23
Recommended combination
ID Tag Read/Write Antenna
V680-D2KF67M (flushmounted on metallic surface: steel)
V680-HS52
Function Transmission distance
(unit: mm)
Read distance
0 to 16.0 mm
(axial deviation
±2)
Write distance
0 to 16.0 mm
(axial deviation
±2)
ID Tag and Read/Write Antenna mounting conditions
V680-D2KF67M
Metallic
V680-HS52
V680-HS63 Read distance
6 to 25.0 mm
(axial deviation
±10)
Non-metallic
Iron
V680-HS63
Metallic
Write distance
V680-HS65 Read distance
6 to 25.0 mm
(axial deviation
±10)
0 to 25.0 mm
(axial deviation
±10)
Non-metallic
V680-
D2KF67M
V680-HS65
Metallic
Write distance
0 to 25.0 mm
(axial deviation
±10)
V680-
D2KF67M
Metallic
ID Tag (8-/32-Kbyte Memory) Transmission
Recommended combination
ID Tag Read/Write Antenna
V680-D8KF68/
-D32KF68
V680-HS63
Function Transmission distance
(unit: mm)
Read distance
0 to 45.0 mm
(axial deviation
±10)
(See note.)
Write distance
0 to 45.0 mm
(axial deviation
±10)
(See note.)
ID Tag and Read/Write Antenna mounting conditions
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680-
D @KF68
Metallic
V680-HS65 Read distance
0 to 75.0 mm
(axial deviation
±10)
(See note.)
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680-D8KF68/
-D32KF68
(Special attachment provided; flush-mounted on metallic surface: steel)
V680-HS63
Write distance
Read distance
0 to 75.0 mm
(axial deviation
±10)
(See note.)
0 to 35.0 mm
(axial deviation
±10)
V680-
D @KF68
Metallic
V680-HS63
V680-A81
(ID Tag Attachment)
Metallic
Write distance
0 to 35.0 mm
(axial deviation
±10)
Metallic
V680-
D @KF68
V680-HS65 Read distance
0 to 55.0 mm
(axial deviation
±10)
V680-HS65
V680-A81
(ID Tag Attachment)
Metallic
Write distance
0 to 55.0 mm
(axial deviation
±10)
Metallic
V680-
D @KF68
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Note: The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the User's
Manual (V680-D1KP @@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
24
V680 Series
RFID System
Handheld Reader Writer Communications Specifications
ID Tags Communications distance
V680-D1KP52MT
V680-D1KP52MT
(embedded in metal: steel)
V680-D1KP66MT
V680-D1KP66T
V680-D1KP58HT
V680-D1KP66T-SP
V680-D2KF52M
V680-D2KF52M
(embedded in metal: steel)
V680-D2KF67M
V680-D2KF67
V680-D8KF68
V680-D32KF68
Read
0 to 9.0 mm
0 to 3.0 mm
0 to 21.0 mm
0 to 27.0 mm
0 to 19.0 mm
0 to 25.0 mm
0 to 7.0 mm
0 to 2.0 mm
0 to 22.0 mm
0 to 28.0 mm
0 to 32.0 mm
0 to 32.0 mm
Note: ID Tag Mounting Conditions
• V680-D1KP52MT: Embedded in resin or steel.
• V680-D1KP66MT: ID Tag mounted with steel on back surface.
• V680-D1KP66T: ID Tag mounted on resin surface (no metal on back surface).
• V680-D1KP58HT: ID Tag mounted on resin surface (no metal on back surface).
• V680-D1KP66T-SP: ID Tag mounted on resin surface (no metal on back surface).
• V680-D2KF52M: Embedded in resin or steel.
• V680-D2KF67M: ID Tag mounted with steel on back surface.
• V680-D2KF67: ID Tag mounted on resin (no metal on back surface).
• V680-D8KF68: ID Tag mounted on resin (no metal on back surface).
• V680-D32KF68: ID Tag mounted on resin (no metal on back surface).
Write
0 to 7.5 mm
0 to 2.5 mm
0 to 18.0 mm
0 to 25.0 mm
0 to 17.0 mm
0 to 23.0 mm
0 to 7.0 mm
0 to 2.0 mm
0 to 22.0 mm
0 to 28.0 mm
0 to 32.0 mm
0 to 32.0 mm
Characteristic Data (Typical)
Transmission Range
(unit: mm)
1-kbyte Memory ID Tag
The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT
Read Write
Y
50
Y
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Read Write
Y
50
Y
40
30
20
X
40
30
20
X
10
10
−50 −40 −30 −20 −10
0 10 20 30 40 X
−50 −40 −30 −20 −10
0 10 20 30 40 X
V680 Series
RFID System
25
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT
Read
Y
50
Y
40
30
20
10
X
Write
−50 −40 −30 −20 −10
0 10 20 30 40
V680-HS63 (mounted on non-metallic material) &
V680-D1KP52MT
Read Write
X
Y
50
Y
20
10
40
30 X
−50 −40 −30 −20 −10
0 10 20 30 40
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T
Read
X
Write
Y
50
Y
40
30
20
10
X
−50 −40 −30 −20 −10
0 10 20 30 40
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T-SP
Read Write
X
Y
50
Y
20
10
40
30
X
−50 −40 −30 −20 −10
0 10 20 30 40 X
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Read Write
Y
50
Y
20
10
40
30
X
−50 −40 −30 −20 −10
0 10 20 30 40
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T
Read Write
X
Y
50
Y
20
10
40
30
X
−50 −40 −30 −20 −10
0 10 20 30
V680-HS65 (mounted on metallic material) &
V680-D1KP66T
Read
Y
100
40
Write
X
80
60
40
20
−100 −80 −60 −40 −20
0 20 40 60 80
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T-SP
Read Write
X
Y
50
Y
20
10
40
30
X
−50 −40 −30 −20 −10
0 10 20 30 40 X
26
V680 Series
RFID System
V680-HS65 (mounted on metallic material) &
V680-D1KP66T-SP
Read
Y
100
80
60
40
20
Write
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66MT (flush-mounted on metallic surface: steel)
Read Write
Y
50
20
10
40
30
Y
X
−100 −80 −60 −40 −20
0 20 40 60 80 X
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66MT (flush-mounted on metallic surface: steel)
−50 −40 −30 −20 −10
0 10 20 30 40 X
V680-HS65 (mounted on metallic material) &
V680-D1K66MT (flush-mounted on metallic surface: steel)
Read Write
Read
Write
Y
50
Y
Y
100
40
30
20
X
80
60
40
10
20
−50 −40 −30 −20 −10
0 10 20 30 40 X
−100 −80 −60 −40 −20
0 20 40 60 80 X
V680-H01 (mounted on non-metallic material) &
V680-D1KP58HT
Read
Y
Write
200
Y
150
Tag
X
V680-H01
100
50
−250 −200 −150 −100 −50
0 50 100 150 200 X
V680 Series
RFID System
27
2-kbyte Memory ID Tag
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M
Read Write
Y
60
Y
50
40
30
20
10
X
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Read Write
Y
60
Y
50
40
30
20
X
10
−70 −60 −50 −40 −30 −20 −10
0 10 20 30 40
V680-HS51 (embedded in metallic material) &
V680-D2KF52M
50
Read
Y
50
Y
60 X
Write
−70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
X
Read Write
Y
40
30
20
10
X
X
−50 −40 −30 −20 −10
0 10 20 30 40 X
V680-HS52 (embedded in metallic material) & V680-D2KF67
−50 −40 −30 −20 −10
0 10 20 30 40
V680-HS63 (mounted on non-metallic material) &
V680-D2KF52M
Read Write
X
Y
60
50
40
30
20
10
Y
X
−70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67
Read Write
X
Y
60
Y
50
40
30
20
10
X
−70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 X
Read
Write
Y
60
50
40
30
20
10
Y
X
−70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 X
V680-HS65 (mounted on metallic material) & V680-D2KF67
−100 −80 −60 −40 −20
Y
90
80
70
60
50
40
30
20
10
0 20 40
Read
60 80
Write
X
28
V680 Series
RFID System
V680-HS52 (embedded in non-metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
Read Write
Y
60
Y
50
40
30
20
10
X
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
Read Write
Y
60
50
40
30
20
Y
X
10
−70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 X
V680-HS65 (mounted on metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
−70 −60 −50 −40 −30 −20 −10
Read Write
60
50
40
30
20
10
Y
90
80
70
−100 −80 −60 −40 −20
0 20 40 60 80 X
0 10 20 30 40 50 60 X
V680 Series
RFID System
29
8-/32-Kbyte Memory ID Tag
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system.
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
Read Write
Read Write
50
40
30
Y
70
60
20
10
Y
X
50
40
30
Y
70
60
20
10
Y
X
−80 −70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 70 X
V680-HS63 (mounted on metallic material) & V680-D8KF68/
-D32KF68
Flush-mounted on metallic surface: steel (Horizontalfacing ID Tag) When the V680-A81 ID Tag Attachment is mounted.
−80 −70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 70 X
V680-HS63 (mounted on metallic material) & V680-D8KF68/
-D32KF68
Flush-mounted on metallic surface: steel (Vertical-facing
ID Tag) When the V680-A81 ID Tag Attachment is mounted.
Read Write
Y
70
60
50
40
30
20
10
Y
X
−80 −70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 70
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
X
Read Write
Y
110
100
90
80
70
60
50
40
30
20
10
Y
X
−120 −100 −80 −60 −40 −20
0 20 40 60 80 100 120 X
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Horizontal-facing ID Tag) When the V680-
A81 ID Tag Attachment is mounted.
Read Write
−120 −100 −80 −60 −40 −20
Y
110
100
90
80
70
60
50
40
30
20
10
0 20 40 60 80
Y
X
100 120 X
Read Write
50
40
30
Y
70
60
20
10
Y
X
−80 −70 −60 −50 −40 −30 −20 −10
0 10 20 30 40 50 60 70
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
X
Read Write
70
60
50
40
30
20
10
Y
110
100
90
80
Y
X
−120 −100 −80 −60 −40 −20
0 20 40 60 80 100 120 X
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Vertical-facing ID Tag) When the V680-A81
ID Tag Attachment is mounted.
Read Write
−120 −100 −80 −60 −40 −20
Y
110
100
90
80
70
60
50
40
30
20
10
0 20 40 60 80
Y
X
100 120 X
30
V680 Series
RFID System
Communications Time
Communications Time between Antennas and Tags
1-Kbyte Memory ID Tag
V680-D1KP @ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit)
V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna)
● Transmission speed: Normal mode
2,500
2,000
1,500
1,000
500
0 200
Write (verify enabled)
400 600
Read
Write
(verify disabled)
800 1,000 1,200
Bytes
● Transmission speed: High-speed mode
2,000
1,800
1,600
1,400
1,200
1,000
800
600
400
200
0
Write (verify enabled)
200 400 600
Read
Write
(verify disabled)
800 1,000 1,200
Bytes
Controller or
ID Sensor Unit transmission speed setting
Command
Normal mode Read
Write
Write verification setting
---
Enabled
Transmission time (ms)
N = Number of processing bytes
T = 1.3N + 31
T = 2.1N + 58
High-speed mode
(See notes 1 and 2.)
Read
Write
Disabled
---
Enabled
Disabled
T = 1.8N + 56
T = 1.0N + 29
T = 1.8N + 51
T = 1.5N + 47
Note 1. The V680-H01 Read/Write Antenna cannot be used in high-speed mode.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode.
2-Kbyte Memory ID Tag
V680-D2KF @@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
● Transmission speed: Normal mode
5,000
● Transmission speed: High-speed mode
4,000
4,500
4,000
3,500
3,000
2,500
2,000
1,500
1,000
500
0
Write (verify enabled)
500 1,000
Write (verify disabled)
1,500
Read
2,000 2,500
Bytes
3,500
3,000
2,500
2,000
1,500
1,000
500
0
Write (verify enabled)
500 1,000
Write (verify disabled)
1,500
Read
2,000 2,500
Bytes
Controller or
ID Sensor Unit transmission speed setting
Normal mode
Command
Read
Write
Write verification setting
---
Enabled
Disabled
Transmission time (ms)
N = Number of processing bytes
T = 1.2N + 30
T = 2.4N + 49
T = 1.2N + 49
High-speed mode (See note.)
Read
Write
---
Enabled
Disabled
T = 0.9N + 27
T = 1.7N + 49
T = 0.9N + 41
Note: When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode.
8-/32-Kbyte Memory ID Tag
V680-D8KF @@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
● Transmission speed: Normal mode
3,500
3,000
Write (verify enabled)
Write
(verify disabled)
2,500
● Transmission speed: High-speed mode
2,500
2,000
Write (verify enabled)
2,000
Read
1,500
Write
(verify disabled)
1,500
1,000
Read
1,000
500
500
0 500 1,000 1,500 2,000 2,500
Bytes
0 500 1,000 1,500 2,000 2,500
Bytes
Controller or
ID Sensor Unit transmission speed setting
Normal mode
Command
Read
Write
High-speed mode (See note.)
Read
Write
Write verification setting
---
Transmission time (ms)
N = Number of processing bytes
T = 1.3N + 30
Enabled
Disabled
---
Enabled
Disabled
T = 1.6N + 59
T = 1.3N + 50
T = 0.8N + 25
T = 1.1N + 41
T = 0.9N + 40
Note: When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode.
V680 Series
RFID System
31
TAT When Using an ID Controller (Reference Values)
TAT (Turn Around Time)
TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a response is received.
TAT = Command send time + ID Tag transmission time + response receipt time
Command send time: This is the time required for sending a command from the host device to the Controller.
It varies depending on the communications speed and format.
ID Tag transmission time: This is the time required for transmission between the Read/Write
Antenna and the ID Tag.
Response receipt time: This is the time required for returning a response from the
Controller to the host device.
It varies depending on the communications speed and format.
For an ordinary command
(Command)
RDA1 · · · · *CR
ID Tag transmission time
RD001234 · · · *CR
Response
TAT
1-Kbyte Memory ID Tag
V680-D1KP
@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit)
V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna)
Controller or ID Sensor
Unit transmission speed setting
Normal mode Read
Command
High-speed mode
(See notes 2 and 3.)
Write
Read
Write
---
---
Write verification
Enabled
Enabled
setting
Disabled
Disabled
Number of bytes to processed (byte)
100
256
512
1,000
100
256
512
1,000
100
256
512
1,000
100
256
512
1,000
100
256
512
1,000
100
256
512
1,000
TAT (ms) (See note 1.)
173
389
747
1,431
280
621
1,184
2,258
248
542
1,028
1,956
141
310
591
1,129
243
537
1,023
1,951
209
456
865
1,647
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. The V680-H01 Read/Write Antenna cannot be used in high-speed mode.
3. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode.
4. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
5. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
32
V680 Series
RFID System
2-Kbyte Memory ID Tag
V680-D2KF @@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Controller or ID Sensor
Unit transmission speed setting
Normal mode Read
Command
High-speed mode
(See note 2.)
Write
Read
Write
---
---
Write verification
Enabled
Enabled
setting
Disabled
Disabled
Number of bytes to processed (byte)
2,000
100
256
512
1,000
2,000
256
512
1,000
2,000
100
256
512
1,000
1,000
2,000
100
256
512
1,000
2,000
100
100
256
512
1,000
2,000
100
256
512
TAT (ms) (See note 1.)
162
363
695
1,330
2,620
301
689
1,328
2,549
5,039
181
382
714
1,349
2,639
132
286
541
1,030
2,020
231
510
970
1,849
3,639
143
297
552
1,041
2,031
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
V680 Series
RFID System
33
8-/32-Kbyte Memory ID Tag
V680-D8KF @@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Controller or ID Sensor
Unit transmission speed setting
Normal mode Read
Command
High-speed mode
(See note 2.)
Write
Read
Write
---
Yes
No
---
Yes
No
Write verification setting
Number of bytes to processed (byte)
2,000
100
256
512
1,000
2,000
256
512
1,000
2,000
100
256
512
1,000
1,000
2,000
100
256
512
1,000
2,000
100
100
256
512
1,000
2,000
100
256
512
TAT (ms) (See note 1.)
172
388
746
1,430
2,820
231
494
929
1,759
3,449
192
408
766
1,450
2,840
117
255
485
925
1,815
163
348
655
1,241
2,431
142
296
551
1,040
2,030
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
34
V680 Series
RFID System
Safety Precautions
WARNING
Do not use this product as a detection device to protect people.
Note: This catalog is intended only to help select the appropriate product. Be sure to read the User's Manual for usage precautions prior to using the product.
Precautions for Safe Use
To ensure safety, be sure to follow the following precautions:
1. Do not operate this product in any flammable, explosive, or corrosive gas environment.
2. Do not disassemble, repair, or remodel this product.
3. Tighten the base lock screws and terminal block screws completely.
4. Be sure to use wiring crimp terminals of the specified size.
5. If any cable has a locking mechanism, be sure to check that it has been locked before using it.
6. The DC power supply must be within the specified rating (24 VDC
+10%/
−15%).
7. Do not reverse the power supply connection.
8. Do not insert water, wire, etc., into any of the gaps in the case.
Doing so may cause fire or electric shock.
9. Turn OFF the Controller or ID Sensor Unit power before attaching or removing the Read/Write Antenna.
10.In the event that the product exhibits any abnormal condition, immediately stop using the system, turn OFF the power, and contact your OMRON sales representative.
11.Dispose of this product as industrial waste.
12.Be sure to follow any other warnings, cautions, and notices given in this document.
Precautions for Correct Use
Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable effects on product performance.
Installation Site
Install the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient operating temperature is within the range stipulated in the specifications.
• There are no sudden variations in temperature (no condensation).
• The ambient operating humidity is within the range stipulated in the specifications.
• No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Installation
• The product uses the 13.56-MHz frequency band to communicate with ID Tags. Some devices, such as some motors, inverters, and switching power supplies, generate electromagnetic waves (i.e., noise) that can affect communications with ID Tags. If any of these devices are nearby, communications with ID Tags may be affected or ID Tags may be destroyed. If the product is to be used near such devices, check the effects on communications before using the product.
• To minimize the general influence of noise, observe the following precautions:
1. Ground any metallic material located around this device to
100
Ω or less.
2. Keep the product away from high voltage and heavy current.
• Do not use products that are not waterproof in misty environments.
• Do not subject the products to chemicals that adversely affect product materials.
• When installing the product, tighten screws to the following torque:
Controller: 1.2 N·m max.
ID Sensor Unit: 0.4 N·m
V680-HS51 Read/Write Antenna: 6 N·m
V680-HS52 Read/Write Antenna: 40 N·m
V680-HS63 Read/Write Antenna: 1.2 N·m
V680-HS65 Read/Write Antenna: 1.2 N·m
• When Read/Write Antennas are mounted side-by-side, mutual interference may reduce the transmission performance. Refer to the RFID System Amplifier and Antennas/ID Tags User's Manual to mount them in a way that will prevent mutual interference.
Storage
Store the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient storage temperature is within the range stipulated in the specifications.
• There are no sudden variations in temperature (no condensation).
• The ambient storage humidity is within the range stipulated in the specifications.
• No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Cleaning
Do not use thinner, benzene, acetone, or kerosene for cleaning.
Using these substances may dissolve the resin material and the case.
V680 Series
RFID System
35
Dimensions
Note: All units are in millimeters unless otherwise indicated.
ID Tag
V680-D1KP52MT/-D2KF52M
R0.2
8 dia.
V680-D1KP66T/-D1KP66MT
4-R4
25 ±0.2
4-R3
V680-D1KP66T-SP
5
Case material
PPS resin
Filling
Epoxy resin
Mounting Hole Dimensions
Two, M3
34
32
32
34
25 ±0.2
Two,
6 dia.
Two,
3.5 dia.
25 ±0.2
3.5
±0.1
25 ±0.2
Case material
PPS resin
V680-D2KF67/-D2KF67M
36.5
34
4-R6
34
Two, 5.5 dia.
(mounting holes)
Mounting Hole Dimensions
Two, M5
1.3
80 ±0.2
40
+0.1
−0.5
16
16
Two, 3.5-dia.
mounting holes
13.2
16
40
+0.1
−0.5
16
5.2
8
0.2
8
V680-D1KP58HT
5.2 8
13.2
Mounting reference surface
2
4.5
8
Mounting Hole Dimensions
Two, M3
32 ±0.2
32 ±0.2
Case material
ABS resin
Filling
Epoxy resin
6.5 2.5 max.
80 ±0.2
95
V680-D8KF68/-D32KF68
Case material
PFA resin
60 dia.
80 dia.
14 dia.
5°
10
±0.2
5
°
Two, 4.5 dia.
mounting holes
10
10
Mounting Hole Dimensions
2-R2
44
±0.2
54
44
Two, M4
10
5
76
±0.2
86
76
Case material
PBT resin
Filling
Epoxy resin
Coating
PPS resin
Read/Write Antenna with Detachable Amplifier Unit
V680-HS52-W
35 dia.
19.8 dia.
30
Mounting Hole Dimensions
22.5 dia.
7
47.6
50
Two toothed washers
Two mounting nuts
M22
× 1
Operation indicator
16.5 dia.
30 50
Insulated cover
37
16.5 dia.
5.5-dia. coaxial cable
Ferrite core
14.5 dia.
Connector
57
65
Case material
Brass
Transmission surface PBT resin
Filling
Epoxy resin
Cable
PVC
V680-HS52-R
35 dia.
19.8 dia.
30
Mounting Hole Dimensions
22.5 dia.
7
47.6
50
57
65
Two toothed washers
Two mounting nuts
M22
× 1
Operation indicator
30
16.5 dia.
50
Insulated cover
20
10
16.5 dia.
5.3-dia. coaxial cable
Ferrite core
14.5 dia.
Connector
Case material
Brass
Transmission surface PBT resin
Filling
Epoxy resin
Cable
PVC
36
V680 Series
RFID System
V680-HS51
V680-HS63-W
V680-HS63-R
V680-HS65-W
V680-HS65-R
5
M12
× 1
21 dia.
9.6 dia.
17
Mounting Hole Dimensions
12.5 dia.
7
24
33
35
5
40
28
±0.1
53
27
Operation indicator
23
Toothed washer
Two mounting nuts
12
6
Ferrite core
26.2
Connector
(14.5 dia.) (16.8 dia.)
25
Ferrite core
50
Insulated cover
Coaxial cable, 2.9 dia., Standard length: 2 m
15
30
50
Insulated cover
37
14.5 dia.
16.5 dia.
16.5 dia.
5.5-dia. coaxial cable
Ferrite core
Connector
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
Center of coil
11
Case material
Brass
Transmission surface ABS resin
Filling
Cable
Epoxy resin
PVC
Case material
Filling
Cable
ABS resin
Epoxy resin
PVC
5
5
40
28
±0.1
53
27
Operation indicator
6
23
30
16.5 dia.
50
16.5 dia.
5.3-dia. coaxial cable
Ferrite core
Insulated cover
20
10
14.5 dia.
Connector
11
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
Center of coil
Case material
ABS resin
Filling
Cable
Epoxy resin
PVC
Operation indicator
14
5
5
100
90 ±0.2
50
50
100
90
±0.2
30
20
Four, 4.5-dia.
(Mounting holes)
25
16.5 dia.
Ferrite core
37
Connector
14.5 dia.
16.8 dia.
10
Bushing
10
30
50
5.5-dia. coaxial cable Insulated cover
11
Operation indicator
14
5
5
100
90
±0.2
50
50
100
90 ±0.2
30
20
Four, 4.5-dia.
(Mounting holes)
25
16.5 dia.
Ferrite core
(39.5)
Connector
14.5 dia. 16.8 dia.
10
Bushing
10
30 50
5.3-dia. coaxial cable
Insulated cover
11
Case material
Filling
Cable
Case material
Filling
Cable
ABS resin
Epoxy resin
PVC (gray)
ABS resin
Epoxy resin
PVC (black)
V680 Series
RFID System
37
Read/Write Antenna with Built-in Amplifier Unit
V680-H01
FCC label
200
185
Four bushings and screws
78.8
Coil core
Mounting Hole Dimensions
Four, M4 or 4.5 dia.
Four, 5-dia. (Mounting holes)
20-mm max.
500
5.8-dia. vinyl-insulated shielded cable with
10 conductors
Standard length: 0.5 m
20-mm max.
185
±0.2
Ferrite core
Connector
Connector cable
4-R8
235
250
142.5
85
7.5
Power supply (green)/ communications (orange) indicator
21
235
±0.2
142.5
Case material
PC/ASA resin
Filling
Cable
Aluminum
PVC
Amplifier Unit
V680-HA63A/-HA63B
40
13.5
25
9.5 dia.
40
25
Connector
13.7
65
15 35.6
Operation indicator
18
12.8 dia.
3.5
25
51
36
15 dia.
Connector
5.8-dia. vinyl-insulated round cable
(2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.)
Case material
PC resin
Filling
Cable
Epoxy resin
PVC
ID Controller
V680-CA5D01-V2/-CA5D02-V2
(80)
65
Two, M4
Mounting Hole Dimensions
80 ±0.2
Two, 4.5-dia.
(Mounting holes)
5
105
95
95 ±0.2
90 80
5
18
17.5
7.5
38
V680 Series
RFID System
ID Sensor Units
CJ1W-V680C11
90
2.7
Six operation indicators
Switches
4.7
Connector
2.7
31
4.5
(140)
65
18.1
17.3
CS1W-V680C11
Six operation indicators
Switches
0 1
130
(193)
123
CJ1W-V680C12
Connector
35
CS1W-V680C12
Eight operation indicators
Switches
0 1
101
(193)
123
Eight operation indicators
2.7
Switches
(140)
4.5
65
90
2.7
31
4.7
24.5
Connectors
18.1
17.3
130
51
25
3.6
35
Connectors
Terminals
8
15
With cover mounted: 16.5
101
Handheld Reader Writer
V680-CHUD
V680-CH1D
V680-CH1D-PSI
45
Operation indicator
Activate switch
23
11 65
25.5
Dimension L
800 60
1900 60
160.5
L
10.5
33
23
Antenna
Ferrite core
3.8-dia. vinyl-insulated round cable
Standard length: 0.8 or 1.9 m
Case material
ABS resin
Nameplate material PET resin
Operation indicator
23
11
45
65
Antenna
10.5
33
23
48
160.5
Activate switch
Reset button
1.8-dia.
× 2 vinyl-insulated flat cable
Standard length: 0.19 m
Connector
13 dia.
45
25.5
2500
±60
Ferrite core
190
±20
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
44.9
24.99 32.2
Connector
Case material
ABS resin
Nameplate material PET resin
Activate switch
Reset button Operation indicator
23
11
45
65
48
160.5
25.5
800
+50
−110
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
44.9
Antenna
10.5
33
23
Case material
ABS resin
Nameplate material PET resin
Ferrite core
24.99
32.2
Connector
V680 Series
RFID System
39
AC Adapter
V600-A22
25.4
±1
54
±1
Handheld Terminal (Recommended)
Recommended Handheld Terminal
Psion Teklogix model 7527S-G2-
@@-S
(V680-A-7527S-G2-
@@-S)
90 42
48 ±1
210
4
+0.1
dia.
9.5
±0.3
Accessories
V680-D1KP66T Attachments
V600-A86 Holder
4-R5.5
25
±0.2
Two, 4-dia.
37 34 15 25
±0.2
15
34
37
V680-D8KF68/-D32KF68 Attachments
V600-A81 Holder
Two, 4.5-dia. mounting holes
3.5
10
4
Mounting Hole Dimensions
Two, M3
16
25
±0.2
25
±0.2
Mounting Hole Dimensions
44 ±0.2
54
44
Two, M4
10
V680-D1KP58HT Attachments
V680-A80
76 ±0.2
86
20 dia.
12 dia.
3.2 dia.
76
Case material
PPS resin
Case material
PBT resin
Filling
Epoxy resin
M12
17
Mounting Hole Dimensions
M12
V680-H01 Special Cables
V700-A40-W 2M
V700-A40-W 5M
V700-A40-W 10M
V700-A40-W 20M
V700-A40-W 30M
20 dia.
41.8
Connector to R/W Head
11.5
15 50
110
40
L1
±100
(See note.)
6-dia. vinyl-insulated round cable
15.5 dia.
Connector to ID Controller
Connection label
Note: The model numbers for each length (L1) are as follows:
Model
V700-A40-W 2M
V700-A40-W 5M
V700-A40-W 10M
V700-A40-W 20M
V700-A40-W 30M
Length L1
2,000
5,000
10,000
20,000
30,000
Material
PVC
40
V680 Series
RFID System
V680 Series
RFID System
41
42
V680 Series
RFID System
V680 Series
RFID System
43
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by
OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS
WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY
CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS
CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE,
OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND
SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS
BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request.
Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON Corporation
Industrial Automation Company
Sensing Devices Division H.Q.
Industrial Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7022/Fax: (81)75-344-7107
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
Authorized Distributor:
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON Industrial Automation Global: www.ia.omron.com
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. Q151-E1-05
Printed in Japan
0408-0.3C (1106) (M)
Lejupielādēt
Publiskā saite ir atjaunināta
Ir atjaunināta publiskā saite uz jūsu tērzēšanu. You may view and manage your chat links after registration here.
Dokumenta publiskā saite
Reklāma