PAA3 Specifications

PAA3
Specifications
Microphone
35 ms, 125 ms, 250 ms, 1 sec
Response time
Input/Output:
Built-in miniature omni direction condenser microphone
XLR jacks for line input and output
Line
USB 1.1 interface
Data Port
160X160 LCD screen with contrast
Display :
adjustment and back light
SPL, dBu, dBV, Voltage
Bar graph and digit display
31-band, 0.5dB resolution Center frequencies
RTA
Other Function
RT60
Reverberation time display, up to 30 seconds
10 RTA+ 6 average calculation
Memory
For 10 RTA memories
Average calculation
31-band
EQ setting value display
Through polarity signal
Phase checker
Simultaneous operation with PC
Transmission
or laptop through USB port
ISO standard from 20Hz to 20KHz
Noise Generator (Based on 6VDC power source)
Measurement Range
Pink noise
Balanced output, -10 dBu
dBu (Line input)
-50 to +40 dBu
1K Hz Signal
Balanced output, -10 dBu
dBV (Line Input)
-52 to +38 dBV
Polarity Signal
30 to 130 dB SPL
SPL (Microphone input)
5 mV to 80 V
Voltage (Line Input)
Power Source
Balanced output, -10 dBu
4x AA batteries (battery life:up to 7 hrs with
alkaline battery) or external 6 VDC adapter
Setting
Weighting
A, C or Flat
Dimensions (HxWxD)
144.95x82.95x39.42mm (5.7"x3.26"x1.55")
Peak hold
ON/OFF
Weight (with battery)
354 g (0.78lbs)
RESET
Maximum level display
144.95mm/5.7"
39.42mm/1.55"
82.95mm/3.26"
V1.1
12/29/04
Information in this document is
subject to change without notice.
WWW.PHONIC.COM
PAA3
PAA3
Handheld Audio Analyzer with USB Interface
Palm-sized, lightweight audio analyzer for all sound engineers
31-band spectrum analyzer, RT60, SPL meter, and more
Easy operation with built-in microphone and generator
EQ setting calculation offersadvice for boosting and cutting at the touch of a button
USB interface allows real-time computer operation
Seven hours of continuous operation with four AA batteries
FEATURES
31-band Real Time Spectrum Analyzer
31-band EQ setting value display (Boost/Cut)
RT60 measurement
Built-in calibrated measurement microphone
Phase checker
Noise generator with pink noise, 1KHz and polarity test signal,
Memory and average calculation function
SPL meter calibration through sound level calibrator
Sound Pressure Level Meter from 30 dB~130 dB
Line signal measurement display in dBu, dBV, or Volts (AC)
SPL meter and level meter have three level range selections
Maximum level, Peak hold displays
XLR input and output sockets
USB interface for desktop software control
Audio test signal CD and supporting software
Three power modes: (1) Power Save (2) On (3) Off
Operates seven hours with four AA batteries
AC power adapter included
balanced output
The PAA3 is a highly accurate handheld audio analyzer that gives sound engineers a rich array of sound
analysis tools. Features include 31-band real time spectrum analysis, RT60, SPL and line meter, internal
generator, EQ setting program, microphone calibration and speaker phase checking abilities. All
functions and menus can be accessed through a central jog dial, leaving your other hand free to adjust
audio settings. Easily upload information and settings to your computer via the built-in USB interface.
The large LCD screen has a visible backlight to help you see in a dark performance environment. And
with a battery life of 7 hours, the PAA3 is the multifunctional tool for every serious audio engineer.