Bakers Pride Y-802 DSP Installation Manual
Publicité
Publicité
30 Pine Street • New Rochelle • New York • 10801
914 / 576 - 0200
914 / 576 - 0605
1 - 800 - 431 - 2745 www.bakerspride.com
fax
US & Canada web address
DESIGN & INSTALLATION
GUIDELINES
DSP DISPLAY OVENS
Singles: DS-805
Doubles: DS-990
D-125 Y-600
D-250 Y-602
Y-800
Y-802
DESIGN
CERTIFIED
R
1
CERTIFIED
R
P/N DSPIG 7/06
Y-602-DSP - FINISHED IN SANDSTONE
Front or Side Mounted
Control Panel Covers
Decorative
Dome/Riser
Hearth
Baking
Decks
Black Powder Coated Doors with Hardwood Handles
Feather-Touch Spring
Balanced Doors
Push-Pull Rods for
Top & Bottom
Heat Control
Solid Unitized
Construction
All Welded
Angle Iron &
Plate Steel
Frame
Front Skirt
Energy Saving
Thermostatic Controls
Slide Out Flame Diverters for Even Heat Distribution
Side Skirt
Extra Thick Industrial
Insulation Throughout
Stackable
2
TABLE OF CONTENTS
ITEM
SPECIFICATION / ORDER GUIDE CHECK LIST
SPECIFICATION SHEETS
!
DS-805 & DS-990
!
!
D-125 & D-250
Y-600 & Y-602, Y-800 & Y-802
GETTING STARTED
PLAIN 'AS IS'
DECORATIVE-TRIM INSTALLATION GUIDELINES
“DSP” STYLE INSTALLATION GUIDELINES
SKETCH PAGE
1-4
5
6
7, 8
15
15
16
4
5-8
5, 6
7, 8
9, 10
11-14
3
SPECIFICATION / ORDER GUIDE CHECK LIST
Date:
Dealer Name:
Project Name:
P. O. Number:
Signature:
How do you intend to finish/build-in your oven(s)? (Choose One)
As Is / Decorative Exterior Trim - Casters optional
DSP Style - Apply tile/stone directly on to oven(s) - Skirts provided
MODEL (Choose One)
DS-805-DSP
D-125-DSP
Y-600DSP
Y-800DSP
DS-990-DSP
D-250-DSP
Y-602DSP
Y-802DSP
Single
Single
Single
Single
Double
Double
Double
Double
Single Oven or
Hinged Control Panel Door
(Choose One)
Upper Oven o f Stacked Installation
Bake Chamber Door
(Choose One)
Automatic Oven Starter
(Optional)
Front Mounted
Side Mounted
Hinged Control Panel Door
(Choose One)
Black Powder Coated
Stainless Steel
Lower Combustion Chamber Door
(Choose One)
Black Powder Coated
Stainless Steel
Black Powder Coated
Stainless Steel
Casters
(Set of 4)
Not suitable for DSP style finish with skirts
Yes
No
Gas Type
(Choose One)
Natural Gas
L.P. Gas
Allows operator to establish automatic oven start & stop times
Yes
No
Decorative Upper
Riser Panel / Dome
Note: Curved Dome on Y Series Ovens &
Rectangular Riser on D Series Ovens
Yes
No
Lower Oven of Stacked Installation
Hinged Control Panel Door
(Choose One)
Bake Chamber Door
(Choose One)
Front Mounted
Side Mounted
Black Powder Coated
Stainless Steel
Hinged Control Panel Door
(Choose One)
Black Powder Coated
Stainless Steel
Lower Combustion Chamber Door
(Choose One)
Black Powder Coated
Stainless Steel
Gas Type
(Choose One)
Natural Gas
L.P. Gas
Automatic Oven Starter
(Optional)
Allows operator to establish automatic oven start & stop times
Yes
No
Casters
(Set of 4)
Not suitable for DSP style finish with skirts
Yes
No
Legs
Legs (total height with or without casters) included. Please specify.
30” (Standard on all single deck models)
16” (Standard on all double deck models except D-250)
12” (Standard on model D-250)
Special height legs - specify length - optional extra charge
NOTE: See specification sheets for additional options & accessories.
DSP CHECK LIST 4/06
4
SUPER DECK
DS DSP SERIES
GAS DECK OVENS
Job ____________ Item # ___________
GAS DECK OVENS
G
q q
Model DS-805 DSP Single
Model DS-990 DSP Double
DS -805 DSP shown without top riser and without skirts
SPECIFICATIONS
BAKERS PRIDE Super Deck DS DSP gas Deck Ovens are ideal for display cooking and exhibition kitchens. These ovens are designed and engineered to be "built-in" behind brick, stone or tile applied directly to ovens exterior or finished and trimmed in brass, copper, stainless or powder-coated trim.
Ovens may be stacked two high. Oven exteriors are all heavygauge, type 403 stainless steel and are fully insulated up to 5"
(127mm) thick for cooler outer temperatures and consistent interior temperatures.
Interior oven frame is constructed of 1/4" (6mm) heavy-duty angle iron frame, completely welded to form a single, unitized section.
The oven body and lining are then welded to the framework.
Oven interiors are manufactured of high-heat resistant 16-gauge aluminized steel. Doors are fully insulated, spring balanced to remain open or closed until moved and finished in black powder coat with hard wood handles.
All models feature independent, operator-controlled top & bottom heat control dampers and micro slides for perfectly balanced results.
DS DSP Series features a 300°-650° F (149°-343°C) thermostat, 6 3/4" (171mm) interior deck height with
(38mm) thick hearth stone throttling
1 1/2" decks (steel decks optional) and are supported by a 1/4" (6mm) angle iron frame.
Combination gas control incorporates a manual gas valve, pilot safety and pressure regulator. Easily removable, slide-out, heavyduty flame diverters distributes the burner flame uniformly in the burner chamber. A 3/4" (19mm) NPT gas connection is located on the left side and left rear of oven - operator/installer may choose.
Heavy-duty, 7-gauge hot rolled steel legs are standard and finished with durable Bakertone Gray.
2 Year limited part and labor warranty standard.
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 1-800-431-2745 fax 914/576-0605 www.bakerspride.com
5
STANDARD FEATURES q q q q q q q q q q q q q q q q
DS Series @ 70,000 BTUH per deck, natural or LP gas
300°-650° F (149°-343°C) throttling thermostat
Top & bottom heat control dampers & micro-slides
Combination gas controls with valve, regulator & pilot safety
Heavy-duty, slide-out flame diverter
6 3/4" (171mm) interior deck heights with 1 1/2" (38mm) thick hearth stone decks
All stainless steel exteriors
Aluminized steel interiors
Spring balanced, fully insulated doors finished in black powder coat with custom hardwood handles or stainless steel with tubular steel handles
Front or side mounted controls with large, hinged access door in black powder coat or stainless steel
Riser top removable for field installations
Front & side skirts
Side or rear gas connections on models with front mounted controls - rear gas connections only on models with side mounted controls
7-Gauge legs finished in Bakertone Gray
Fully insulated throughout
2 Year limited part and labor warranty q q q q q q q q q
OPTIONS & ACCESSORIES
Steel decks in lieu of hearth decks
150°-550° F (65°-288°C) thermostat
350°-700° F (149°-371°C) thermostat
Set of 4 casters - two with locks - not for use with skirts
Stainless steel leg covers
Special height legs
Automatic oven starter
Draft flue for direct vent (not available on CE units)
Without dome/riser and/or without skirts
CERTIFICATIONS
DESIGN
®
CANADIAN GAS ASSOCIATION
CERTIFIED
CERTIFIED
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
ALL DIMENSIONS NOMINAL
SHIPPING INFORMATION
Shipping Weight
Model
DS-805
Lbs.
1073
Kilos
487
Inches
Width mm
31 787
Each oven ships separately
Hearth Decks and Legs ship in separate cartons
SPECIFICATIONS
Deck Sizes
Model in.
mm
# Decks
DS-805
DS-990
48 x 36
48 x 36
1219 x 914
1219 x 914
* Overall height excludes dome/riser top
MINIMUM CLEARANCES
1
2
Carton Dimensions
Depth
Inches mm
Height
Inches mm
60 1365 86 2184
Crate Size
Cubic
Feet
Cubic
Meter
78 2.8
Inches
Width mm
65 1/4
65 1/4
1651
1651
Overall Dimensions
Inches
Depth mm
43
43
1092
1092
Height*
Inches mm
54 7/8
65 3/4
1394
1670
Right
Left
Rear
Noncombustible Construction
Inches mm
0
0
2
0
0
51
Combustible Construction
Inches mm
1
3
3
25
76
76
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 1-800-431-2745 fax 914/576-0605 www.bakerspride.com
6
GAS SUPPLY
Model
DS-805
DS-990
CE
BTUH
70,000
140,000
6"
(152mm)
12"
(305mm)
KW
20.5
41.0
CONNECTION
3/4”
3/4”
6"
(152mm)
12"
(305mm)
For Direct Venting
MUST BE SPECIFIED
AT TIME OF ORDER
For Installation Under
Ventilation Hood
STANDARD
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
TSW:07/06
SUPER DECK
D-DSP SERIES
GAS DECK OVENS
Job ____________ Item # ___________
GAS DECK OVENS
G
q q
Model D-125 DSP Single
Model D-250 DSP Double
D-125 DSP shown without top riser and without skirts
SPECIFICATIONS
BAKERS PRIDE D Series DSP Deck Ovens are ideal for display cooking and exhibition kitchens. These ovens are designed and engineered to be "built-in" behind brick stone or tile applied directly to ovens exterior or finished and trimmed in brass, copper, stainless or powder-coated trim.
Ovens may be stacked two high. Oven exteriors are all heavygauge, type 403 stainless steel and are fully insulated up to 5"
(127mm) thick for cooler outer temperatures and consistent interior temperatures.
Interior oven frame is constructed of 1/4" (6mm) heavy-duty angle iron frame, completely welded to form a single, unitized section.
The oven body and lining are then welded to the framework.
Oven interiors are manufactured of high-heat resistant 16-gauge aluminized steel. Doors are fully insulated, spring balanced to remain open or closed until moved and are finished in black powder coat with hard wood handles.
All models feature independent, operator-controlled top & bottom heat control dampers and micro slides for perfectly balanced results.
D Series features a 300°-650° F (149°-343°C)
10 3/4" (273mm) interior deck height with throttling thermostat,
1 1/2" (38mm) thick hearth stone decks (steel decks optional) and are supported by a
1/4" (6mm) angle iron frame.
Combination gas control incorporates a manual gas valve, safety pilot and pressure regulator. Easily removable, slide-out, heavy-duty flame diverters distribute the burner flame uniformly in the burner chamber. A 3/4" (19mm) NPT gas connection is located on the left side and left rear of oven - operator/installer may choose.
Heavy-duty, 7-gauge hot rolled steel legs are standard and finished with durable Bakertone gray paint.
2 Year limited part and labor warranty standard.
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 1-800-431-2745 fax 914/576-0605 www.bakerspride.com
7 q q q q q q q q q q q q q q q q
STANDARD FEATURES
D Series @ 125,000 BTUH per deck natural gas or 105,000
BTUH in LP gas (LP gas not CE certified)
300°-650° F (149°-343°C) throttling thermostat
Top & bottom heat control dampers & micro-slides
Combination gas controls with valve, regulator & safety pilot
Heavy-duty, slide-out flame diverters
10 3/4" (273mm) interior deck heights with 1 1/2" (38mm) thick stone hearth decks
All stainless steel exteriors
Aluminized steel interiors
Spring balanced, fully insulated doors finished in black powder coat with custom hard wood handles or stainless steel with tubular steel handles
Front or side mounted controls with large, hinged access cover in black powder coat or stainless steel
Riser top - removable for field installation
Front & side skirts
Left side or rear gas connections on models with front mounted controls - rear gas connection only on models with side mounted controls
7-Gauge legs
Fully insulated throughout
2 Year limited part and labor warranty
OPTIONS & ACCESSORIES q q q q q q q q q q
Steel decks
150°-550° F (65°-288°C) bake thermostat
Set of 4 casters - two with locks - not for use with skirts
Stainless steel leg covers
Special height legs
Automatic oven starter
Draft flue for direct vent (not available on CE units)
Black powder coated doors with hard wood handles
Black powder coated hinged control access door panel
Without dome and/or without skirts
CERTIFICATIONS
DESIGN
®
CANADIAN GAS ASSOCIATION
CERTIFIED
CERTIFIED
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
ALL DIMENSIONS NOMINAL
SHIPPING INFORMATION
Shipping Weight
Model
D-125
Lbs.
1385
Kilos
626
Inches
Width mm
31 787
Each oven ships separately
Hearth Decks and Legs ship in separate cartons
SPECIFICATIONS
Deck Sizes
Model in.
mm
# Decks
D-125
D-250
48 x 36
48 x 36
1219 x 914
1219 x 914
* Overall height excludes dome top
1
2
MINIMUM CLEARANCES
Carton Dimensions
Depth
Inches mm
Height
Inches mm
53 1364 82 2083
Crate Size
Cubic
Feet
Cubic
Meter
88 2.5
Inches
Width mm
65 1/4
65 1/4
1657
1657
Overall Dimensions
Inches
Depth mm
43
43
1092
1092
Inches
Height* mm
59
70
1499
1778
Right
Left
Rear
Noncombustible Construction
Inches mm
0
0
2
0
0
51
Combustible Construction
Inches mm
1
3
3
25
76
76
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 1-800-431-2745 fax 914/576-0605 www.bakerspride.com
8
GAS SUPPLY
GAS TYPE Model
D-125
D-250
D-125
D-250
CE natural natural
LP
LP
BTUH
125,000
250,000
105,000
210,000
KW
36.6
30.7
73.2
61.4
CONNECTION
3/4”
3/4”
3/4”
3/4”
6"
(152mm)
12"
(305mm)
6"
(152mm)
12"
(305mm)
For Direct Venting
NOT CE APPROVED
MUST BE SPECIFIED
AT TIME OF ORDER
For Installation Under
Ventilation Hood
STANDARD
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
TSW:07/06
SUPER DECK
Y-DSP SERIES
GAS DISPLAY OVENS
Model Y-602-DSP with optional stone finish
SPECIFICATIONS
BAKERS PRIDE Y-DSP Display Ovens are ideal for display cooking and exhibition kitchens. These ovens are designed and engineered to be "built-in" behind brick, stone or tile applied directly to ovens exterior or finished and trimmed in brass, copper, stainless or powder-coated trim.
Ovens may be stacked two high. Oven exteriors are all heavygauge steel and are fully insulated up to 5" (127mm) thick for cooler outer temperatures and consistent interior temperatures.
Interior oven frame is constructed of 1/4" (6mm) heavy-duty angle iron frame, completely welded to form a single, unitized section.
The oven body and lining are then welded to the framework.
Oven interiors are manufactured of high-heat resistant 16-gauge aluminized steel. Doors are fully insulated, spring balanced with natural black finish and custom wood handles.
Lintel plates support the masonry or tile for ease of installation.
Standard features include dome top plus front and side skirts.
All models feature independent, operator-controlled top & bottom heat control dampers and micro slides for perfectly balanced results.
Y Series features a 300°-650° F (149°-343°C)
8" (203mm) interior deck height with stone throttling thermostat,
1 1/2" (38mm) thick hearth decks (steel decks optional) and are supported by a 1/4"
(6mm) angle iron frame.
Combination gas control incorporates a manual gas valve, pilot safety and pressure regulator. Easily removable, slide-out, heavyduty flame diverters distribute the burner flame uniformly in the burner chamber. A 3/4" (19mm) NPT gas connection is located on the left side and left rear of oven - operator/installer may choose.
Heavy-duty, 7-gauge hot rolled steel legs are standard and finished with durable Bakertone.
2 Year limited part and labor warranty standard.
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 1-800-431-2745 fax 914/576-0605 www.bakerspride.com
Job ____________ Item # ___________
GAS DECK OVENS
G
q q
Model Y-600-DSP Single
Model Y-602-DSP Double q q
Model Y-800-DSP Single
Model Y-802-DSP Double
STANDARD FEATURES q q q q q q q q q q q q q q q q
Y Series @ 120,000 BTUH per deck, natural or LP gas
300°-650° F (149°-343°C) throttling thermostat
Top & bottom heat control dampers & micro-slides
Combination gas controls with valve, regulator & pilot safety
Heavy-duty, slide-out flame diverters
8" (203mm) interior deck heights with 1 1/2" (38mm) thick hearth stone decks
Black powder coated doors with custom hardwood handles or stainless doors with tubular steel handles
Front or side mounted controls with large, hinged access cover door in black powder coat or stainless steel
Dome top - removable for field installations
Front & side skirts
Aluminized steel interiors
Spring balanced, fully insulated doors
Rear gas connections
7-Gauge legs
Fully insulated throughout
2 Year limited part and labor warranty q q q q q q q q
OPTIONS & ACCESSORIES
Side-mounted controls
Steel decks in lieu of hearth stone decks
150°-550° F (65°-288°C) thermostat
Automatic oven starter
Draft flue for direct vent (not available on CE units)
Fire brick hearth decks (Y-600/602 only)
Without dome and/or without skirts
Set of 4 casters - two with locks - not for use with skirts
CERTIFICATIONS
DESIGN
®
CANADIAN GAS ASSOCIATION
CERTIFIED
CERTIFIED
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
D
C
B
A
D
TOP VIEW
.
LEFT SIDE VIEW
Single Unit With Side Controls
LEFT SIDE VIEW
Stacked Unit With Side Controls
FRONT VIEW
Stacked Unit With Front Controls
ALL DIMENSIONS NOMINAL
SHIPPING INFORMATION
Shipping Weight
Model Lbs.
Kilos
Inches
Width mm
Y-600-DSP 1385 626 31 787
Y-800-DSP 1600 726 31 787
Each oven ships separately
Hearth Decks and Legs ship in separate cartons
SPECIFICATIONS
Deck Sizes
Model A x B mm
Y-600-DSP
Y-602-DSP
Y-800-DSP
Y-802-DSP
36 x 60
36 x 60
44 x 66
44 x 66
914 x 1524
914 x 1524
1118 x 1676
1118 x 1676
* Overall height excludes dome top
# Decks
1
2
1
2
Carton Dimensions
Depth
Inches mm
Height
Inches mm
53
60
1364
1365
82
86
2083
2184
Crate Size
Cubic
Feet
Cubic
Meter
76
78
2.4
2.8
Inches
78
78
84
84
C mm
1981
1981
2134
2134
Overall Dimensions
D
Inches mm
43
43
51
51
1092
1092
1295
1295
Height*
Inches mm
55 1/8
66 1/4
55 1/8
66 1/4
1400
1683
1400
1683
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 1-800-431-2745 fax 914/576-0605 www.bakerspride.com
10
GAS SUPPLY
Model
Y-600-DSP
Y-602-DSP
Y-800-DSP
Y-802-DSP
CE
BTUH
120,000
240,000
120,000
240,000
KW
35.15
70.30
35.15
70.30
CONNECTION
3/4”
3/4”
3/4”
3/4”
MINIMUM CLEARANCES
Right
Left
Rear
Noncombustible Construction
Inches mm
0
0
2
0
0
51
Combustible Construction
Inches mm
1
3
3
25
76
76
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
TSW:07/06
GETTING STARTED
Thank you for choosing DSP style display ovens. We recommend you thoroughly read and consider steps #1 thru #8 prior to designing your kitchen and prior to ordering your oven(s). We also recommend that you thoroughly read and understand these installation guidelines prior to installing your new oven(s).
Choose which oven size is right for you. DSP display ovens are available in 4 models.
Choose single, or double deck for increased capacity and production through put.
MODEL
DS-805 DSP
D-125 DSP
Y-600 DSP
Y-800 DSP
DESCRIPTION
Single Deck
Single Deck
Single Deck
Single Deck
DECK SIZE
48”w x 36”d
48”w x 36”d
60”w x 36”d
66”w x 44”d
NO. OF DECKS
1
1
1
1
CAPACITY
4 each 16” Pizzas
4 each 16” Pizzas
6 each 16” Pizzas
8 each 16” Pizzas
DS-990 DSP
D-250 DSP
Y-602 DSP
Y-802 DSP
1A
Double Deck
Double Deck
Double Deck
Double Deck
48”w x 36”d
48”w x 36”d
60”w x 36”d
66”w x 44”d
2
2
2
2
8 each 16” Pizzas
8 each 16” Pizzas
12 each 16” Pizzas
16 each 16” Pizzas
Refer to individual specification sheets for more details.
SINGLE DECK 1B DOUBLE DECK
Choose front-mounted or side-mounted control panel(s). The exterior finish style and location of controls often work together to create the “look” you want.
2A SINGLE OVEN
W/FRONT-MOUNTED CONTROLS
2B DOUBLE UNIT
W/SIDE-MOUNTED CONTROLS
11
3A
Decide how you intend to “finish” or “build-in” your oven(s) prior to ordering. Installation instructions are available for each “finish” style. There are three basic styles: 1, 2, 3.
PLAIN “AS-IS” - STYLE 1 3B DECORATIVE TRIM - STYLE 2
3C
Plain, AS-IS ready to use. No decorative finish.
Available with black powder coated doors or all stainless steel exterior.
Finish your oven with decorative trim-pieces of brass, copper, tile etc., in black powder coated doors or all stainless steel exterior.
DSP - STYLE 3
12
“DSP” Style. Stone, tile, thin brick or other masonry finish is applied directly to the oven exterior. Skirts provided, casters excluded.
4A
Ventilation: Choose either a canopy style hood or direct vent .
Canopy Style Hood
Vent Hood (Not Included)
BAKERS PRIDE
Our Standard flue is for exhausting into a canopy hood.
4B Direct Vent
BAKERS PRIDE
Our Direct Vent flue is for venting into a chimney and is optional at no extra cost.
NOTE: Minimum clearance may be reduced when using UL listed hood assemblies and installed in accordance with the terms of the listing and the manufacturer instructions. Consult NFPA standard number 96 and local codes concerning ventilation requirements and fire extinguishing system requirements.
13
Choose gas type: Natural or L.P. Gas.
!
!
!
!
!
!
!
Choose options and accessories
Casters - Set of 4.
NOTE: Provision for restraints on the legs with casters must be made.
DO NOT use casters with DSP style built-in ovens as the casters interfere with the skirts.
Natural wood essence smoke boxes.
Automatic oven starter.
Front or Side mounted controls.
Bake chamber door and combustion chamber door in stainless steel or black powder coated with hard wood handles.
Hinged control panel access door in stainless steel or black powder coated.
Black powder coated doors may be mixed or matched with stainless steel doors on special request.
STEP #7
!
!
!
!
Choose leg height
(total height with or without casters) included. Please specify.
30” (Standard on all single deck models)
16” (Standard on all double deck models except D-250)
12” (Standard on model D-250)
Special height legs - specify length - optional extra charge
Note: If you choose non-standard leg heights, skirts will not fit properly (DSP style installations).
STANDARD HEIGHTS
Inches
6
12
16
24
30
36
38 mm
152
305
406
610
762
914
965
Standard legs are provided at no extra charge. Casters optional. Stainless steel leg covers available. You may specify a cut-to-order custom height up to 38” as an option.
!
!
Other Key ProvisionsAnd Notes
Emergency gas shut off valve in an easily accessible location must be provided by the customer.
Gasoline or other flammable vapors and liquids should never be stored in the vicinity of the unit.
BE SPECIFIC WHEN ORDERING
14
DSP DISPLAY OVENS
PLAIN “AS-IS” STYLE INSTALLATION
Your DSP Display oven(s) may be used “as-is” without decorative finishes or architecturally designed facades.
For best-looking results consider your preference for stainless steel doors or black powder coated doors with wood handles and other exterior finish options.
Oven(s), decks and legs are shipped in separate cartons.
Uncrate, attach legs, install decks then connect gas and electric utilities. Refer to operating instruction manual provided with oven(s) for details .
5 PLAIN “AS-IS” STYLE
Plain, AS-IS ready to use. No decorative finish.
Available with black powder coated doors or all stainless steel exterior.
DSP DISPLAY OVENS
DECORATIVE TRIM STYLE INSTALLATION
Rather than 'building-in' your oven(s) or applying masonry finishes directly to the oven(s) exterior, consider finishing your oven(s) with decorative trimpieces of brass, copper, powder-coated colored trim or
L-shaped tile pieces.
6 DECORATIVE TRIM STYLE
For best-looking results consider your preference for stainless steel doors or black powder coated doors with wood handles and other exterior finish options. Control panel access cover, combustion chamber door and flue-front may be ordered in black-powder-coated finish or stainless steel.
Metal trim pieces are fastened by the foodservice equipment contractor directly to the oven exterior using
3/8” to 1/2” sheet metal screws. Pre-drill holes for best results.
The design is only limited by your imagination.
Finished with decorative trim-pieces of brass, copper, tile etc. In black powder coated doors or all stainless steel exterior.
Disclaimers: Continuous product improvement is a policy of Bakers Pride. Therefore specifications and designs are subject to change without notice. Ultimately, the proper design and execution of any appliance installation is the responsibility of the property owner. That party or their representative is expected to engage the service of a qualified professional to carry out that responsibility. This includes matters of compliance with local codes. The above information is provided as guidelines to the installation professional. Job site conditions vary considerably, and therefore Bakers Pride Oven Company can assume no responsibility or liability for the proper installation and operation of the gas-fired appliance. The above assumes certain conditions, which are specified. A quality professional may modify these recommendations as job site conditions dictate. For example, 70°F air is assumed.
15
DSP DISPLAY OVENS - DSP STYLE INSTALLATION
Anyone with some experience laying tile should be able to complete this project with relative ease.
Step #1 Uncrate oven(s), attach legs, set in place.
Step #2 Attach front sheet metal skirt (provided) by drilling holes in oven legs using pre-punched holes in sheet metal skirt as a template.
NOTE: Bottom flange on skirt faces outward.
Step #3 Secure skirt using sheet metal screws.
Step #4 If you plan on finishing the oven sides with tile, etc, follow steps #2 and #3 for side skirts.
Step #5 Fasten 3/8” thick fire resistant “Wonder Board” (7mm) to oven front (and sides if appropriate) using 1/2” to
5/8” sheet metal screws.
i
NOTE: “ Wonder Board” must be cut to fit. Allow access for push-pull rod holes, oven control access doors and combustion and bake chamber doors.
Step #6 Attach tile, stone, thin-brick or the material of choice over “Wonder Board” using either a latex/polymer based high-heat ceramic thin-set mortar, “spec” mix mortar or type “S” mortar. Best results will be achieved using tile, etc. no more than 5/8” thick.
NOTE: Start at the floor and work up to top of oven. Cut stone, etc. to fit as required based on your design and to create the look you want.
Step #7 Consider L-shaped tile or brick trim pieces along front vertical corners and top edges of oven front and side to complete a finished look.
Step #8 Grout between brick joints. It is best to allow the thin-set mortar to dry over night prior to grouting.
Step #9 Allow grout to dry for 24 hours prior to starting ovens.
NOTE: Wonder Board equivilents; Harde Backer Board, various trade names.
7 Y-602 DSP WITH TILEWORK
NOTE:
Dome/Riser tops may be removed when required to allow access through doors or under canopy during installations.
16
Télécharger
Lien public mis à jour
Le lien public vers votre chat a été mis à jour. Vous pouvez afficher et gérer vos liens de chat après inscription ici.
Lien public du document
Publicité
