INSTRUCTION

MANUAL

650Line Intensifier3™

HTINTB8G / HTINTB8GW

HTINTB10G / HTINTB10GW

Speco Technologies is constantly developing product improvements.

We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Rev. 6/20/2012

Contents

◑

Contents ...................................................... 1

◑

Precautions ................................................. 2, 3

◑

Safety Instructions ...................................... 4

◑

Package Contents ....................................... 5

◑

Camera Installation ..................................... 6-8

◑

Specifications .............................................. 9

◑

Camera Dimension ..................................... 10

◑

Features ...................................................... 11,12

◑

OSD Menu Details ...................................... 13-24

◑

Trouble Shooting ......................................... 25

1

Do not install the camera in extreme temperature conditions.

Precautions

Do not install the camera under unstable lighting conditions.

Do not touch the front lens of the camera.

Only use the camera under conditions where temperatures are between

-10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures.

Severe lighting change or flicker can cause the camera to work improperly.

Never keep the camera pointed directly at strong light.

Do not drop the camera or subject it to physical shocks.

This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.

Do not expose the camera to radioactivity.

It can cause malfunctions to occur.

Housing damage can compromise weatherproof ratings.

If exposed to radioactivity the CCD will fail.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.

* please check that the power satisfies the normal specification before connecting the camera.

2

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER(OR BACK).

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER(OR BACK).

ISO14001

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

☞

Do NOT use power sources other than those specified.

This installation should be made by a qualified service person and should conform to all local codes.

3

Safety Instructions

Precautions for use

◑

This camera should be installed by qualified personnel only

◑

There are no user serviceable parts inside

◑

Do not disassemble this camera other than to make initial adjustments

◑

Use a UL approved regulated 24 volt AC or 12 volt DC power supply

◑

Use appropriate low voltage power cable to prevent fire or electrical shock

◑

Please insure that your installation area can support the weight of the camera

Please handle this camera carefully :

◑

Do not use a strong or abrasive detergent when cleaning the camera

◑

Do not install near cooling or heating device

4

Package Contents

Please make sure that the following items are included in the Package:

1) HTINTB8G, HTINTB8GW, HTINTB10G, HTINTB10GW

• 1 Video Test Connector, Power Jack

• 1 Bracket Base

• 2 Wrenches

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws M5x10

5

CAMERA INSTALLATION

jvuulj{Gwv~lyGjhislG

XUG~oluG|zpunGXYG}vs{zGkjGOŠ–•š›ˆ•›G–“›ˆŽŒG\WWG”hPG

w–žŒ™Gp•—œ›Gaylk jŒ•›Œ™GaGORP

kjGXY}Gw–žŒ™Gzœ——“ 

YUG~oluG|zpunGY[G}vs{zGhjGO[WG}–“›Gh”—šP

ylkORP ishjraOTP

hjGY[} w–žŒ™Gzœ——“ 

ZUGjvuulj{G}pklvGjhislG

T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG

[UGjvuulj{Gh“ˆ™”G–œ›—œ›GOyŒ“ˆ G–œ›—œ›P

T j–••ŒŠ›GORGSGjvtPG–™Gw–š›ŒGˆŠ›ˆ›–•Gˆ•‹GOTUGjvtPG–™G uŒŽˆ›ŒGˆŠ›ˆ›–•G–GlŸ›Œ™•ˆ“Gh“ˆ™”GkŒŠŒGžŒ•Gt–›–•G kŒ›ŒŠ›–•GšG˄vu˅G•G›ŒGŠˆ”Œ™ˆU

R jvtG h“ˆ™”Gvœ›—œ›G

T

w–š›ŒGh“ˆ™”GkŒŠŒG uŒŽˆ›ŒGh“ˆ™”GkŒŠŒ

6

CAMERA INSTALLATION

Compatibility

1. HTINTB8G, HTINTB8GW, HTINTB10G, HTINTB10GW

CVCJBB INTJBS INTCM

7

CAMERA INSTALLATION

1. HTINTB8G, HTINTB8GW, HTINTB10G, HTINTB10GW

CAMERA ASSEMBLY

BASE ADAPTOR BRACKET

TAPPING SCREW 4X25, 4EA

HEXAGON SOCKET SCREW M5X10, 4EA

8

650 Line Intensifier3

(Weatherproof Bullet Camera with mount plate)

DC Auto Iris Varifocal Lens 2.8-12mm / 9-22mm

■

■

HTINTB8G / HTINTB8GW

(2.8-12mm)

HTINTB10G / HTINTB10GW

(9-22mm)

Automatic Thermostatic Sensor

SPECIFICATIONS

MODEL

Image Pick-Up Device

TV System

Total Pixels

Effective Pixels

Scanning Frequency

Scanning System

Synchronization

Resolution

Minimum Illumination

S/N Ratio

Video Output

Electronic Shutter Speed

OSD

WDR

BLC

Day & Night

Gain Control

White Balance

Intensify

Motion Detection

Privacy Masking

SPECO DNR

Digital Zoom

DIS (Digital Image Stabilization)

Sharpness

Flip / Mirror

Power Supply

Power Consumption

Lens

Operational Temp.

Storage Temp.

Dimension

Weight

HTINTB8G / HTINTB10G

1/3” Sony Super HAD ll CCD

NTSC, PAL

NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)

NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)

NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)

2:1 Interlace

Internal

650TV Lines

CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux

More than 52dB

CVBS: 1.0Vp-p / 75Ω

NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)

Available

On / Off (Level adjustable)

BLC / HLC / OFF

Color / BW / AUTO

Low / High / Off

ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)

Auto / Off (Selectable x2 ~ x512)

On / Off (8 Programmable Zones)

On / Off (12 Programmable Zones)

On / Off (Level adjustable)

On / Off (x1 ~ x16)

On / Off

On / Off (Level adjustable)

On / Off

DC 12V / AC24V(Dual Voltage)

Heater ON (Below 50F) – DC12V 220mA, AC24V 110mA

Heater OFF (Above 50F) – DC12V 160mA, AC24V 85mA

Glacier Heaters – DC12V 740mA, AC24V 375mA

Maximum power consumption – DC12V 800mA, AC24V 400mA (Heaters ON, Glacier Heaters ON)

DC Auto Iris Varifocal Lens 2.8-12mm / 9-22mm

-4ºF~+140ºF RH 95% Max / -40ºF with Glacier Heaters

-4ºF~+140ºF RH 95% Max

3.46"(W) * 4.01"(H) * 11.02"(D)

3 lbs

9

CAMERA DIMENSION

1) HTINTB8G, HTINTB8GW, HTINTB10G, HTINTB10GW

3.46”

5.90”

11.02”

5.03”

10.51”

10

FEATURES

Now with “PRESETS”

PRESETS (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light)

Used for a quick and easy setup for the installation environment.

650TVL Resolution

Horizontal resolution of 650 TV lines is achieved by using a

SONY Super-HAD CCD with 410,000 pixels, and a custom DSP yielding pictures with a high S/N ratio.

INTENSIFIER 3

More Powerful Performance in low light condition.

High quality Pictures to be captured in very low light condition.

WDR

More Powerful WDR in strong back lighting.

Your camera allows you to get a clear image.

SPECO DNR

The Intensifier camera has a DSP chip that can remove image noise efficiently showing clean images in low light conditions.

HLC (High Light Compensation)

This function reverses bright spots in the picture (such as headlights). This enables the entire system to do a better job of resolving and displaying grayscale information such as a license plate.

11

FEATURES

Motion Detection with Alarm Output

Built in motion detector with adjustable areas of coverage will

Send a signal to an external alarm device when motion is detected.

PRIVACY MASK

It also has the ability to mask up to 8 areas of the picture where

Viewing is not desired. Each zone can be independently programmed via the OSD

STABILIZER

This function removes image jitter that is caused by vibrations in the building and reduces the amount of hard drive space.

DIGITAL ZOOM

The picture could be enlarged by this function in digital.

DAY/NIGHT

The Intensifier camera can show color pictures in all lighting conditions, or you can have it automatically switch to a B/W picture in low light conditions

OSD

All camera functions are menu driven for easy use.

Automatic Thermostatic Sensor

12

●

Preset Mode

SPECO TECH

1.PRESET MODE

2.MAIN SETUP

3.EXIT

INDOOR

RESET

1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY / ELEVATOR.

- Used for a quick and easy setup for the installation environment.

●

Menu Setup

1. Press the Function Setup switch.

- Main setup menu is displayed on the monitor screen.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL

4.WDR

5.BACKLIGHT

6.SPECO DNR

7.DAY/NIGHT

8.SPECIAL

9.RETURN

ATW

OFF

OFF

ON

AUTO

SAVE

2. Select a desired function using the Function Setup switch.

- Place the cursor over a desired item.

3. Set up a selected item by using the Function Setup switch.

4. To finish the setting, select 'RETURN' and press the Function Setup switch.

☞

NOTE

■ An item with the

◀

icon also has sub menus. To select a sub menu, select an item with the icon and press the Function Setup switch.

■ An item with the - - - icon is unavailable due to function settings.

●

Lens Setting

Using this function, you can control the screen brightness.

1. When the SETUP menu screen is displayed, select 'LENS' by using

the Function Setup switch so that the arrow indicates 'LENS'.

2. DC : You can adjust the minimum shutter and maximum value of ESC

shutter mode.

13

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL ATW

3. THE Lens mode has sub menu items as listed below.

- BRIGHTNESS : Adjusts the video brightness.

- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the

Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.

☞

NOTE

■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---).

●

Exposure Setting

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL ATW

1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function Setup Switch.

2. Select a desired mode using the Function Setup switch.

EXPOSURE SETUP

1.BRIGHTNESS

2.SHUTTER

3.AGC

4.INTENSIFY

5.RETURN

25

- - -

HIGH

OFF

◆ SHUTTER : You can select either auto or manual shutter.

* --- : Shutter speed is fixed at 1/60sec(1/50sec)

* ESC : Select this to control the shutter speed automatically. If ESC is

selected, the shutter speed is automatically controlled depending

on the ambient illumination of the subject.

* MANUAL : You can control shutter speed manually.

(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)

* A.FLK : Select this when you see picture flicker, this can happen when the

frequency of the local lighting clashes with the camera.

14

☞

NOTE

■ When the SHUTTER is set to MANUAL or A.FLK mode, INTENSIFY will be disabled.

◆ AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen

- but the higher the noise.

* OFF : Deactivates the AGC function.

* LOW : Allows automatic gain control from 5.3dB to 32dB.

* HIGH : Allows automatic gain control from 5.3dB to 37dB.

◆ INTENSIFY : When it is night or dark, the camera automatically detects the

light level and maintains a clear picture if this mode is activated.

* OFF : Deactivates the INTENSIFY function.

* AUTO : Activates the INTENSIFY function.

◆ RETURN : Select this to save the changes in the EXPOSURE menu and return

to the SETUP menu.

☞

NOTE

■ If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by increasing or decreasing the shutter speed. (x2 ~ x512)

■ Note that the higher the zoom level, the brighter the screen, but the more likely there will be a ghosting effect.

■ It is normal for Noise, Spots and Whitish symptoms to appear in INTENSIFY mode when the D-ZOOM level is increased.

●

White Balance (White Bal) Setting

Use the White Balance function to adjust the screen color.

1. When the SETUP menu screen is displayed, select 'White Bal' by using the

Function Setup switch so that the arrow indicates 'White Bal'.

2. Select a desired mode using the Function Setup switch.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL ATW

15

※ Select one of the following 5 modes, as appropriate for your purpose.

◆ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.

◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.

(sodium light inclusion)

◆ INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.

◆ MANUAL : Select this to fine-tune White Balance manually. Set White Balance first

by using the ATW or AWC mode. After that switch to MANUAL mode,

fine-tune the White Balance and then press the Function Setup switch.

◆ AWC→SET : To find the optimal luminance level for the current environment, point

the camera towards a sheet of white paper and press the Function

Setup switch. If the environment changes, readjust it.

☞

NOTE

■ White Balance may not work properly under the following conditions. In this case select the AWC mode.

①

When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset).

②

When the ambient illumination of the subject is dim.

③

If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable.

●

WDR Setting

WDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of images with high contrast between bright and dark spots.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL

4.WDR

ATW

OFF

1. When the SETUP menu screen is displayed, select 'WDR' by using the switch so that the arrow indicates 'WDR'.

2. Use the switch to change the WDR level according to the contrast between bright and dark areas.

16

●

Backlight Setting

Unlike conventional cameras, the 650Line Intensifier3™ Series are designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip.

1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function Setup switch so that the arrow indicates 'BACKLIGHT'.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL

4.WDR

5.BACKLIGHT

6.SPECO DNR

7.DAY/NIGHT

8.SPECIAL

9.RETURN

ATW

OFF

OFF

ON

AUTO

SAVE

2. Select a desired mode using the Function Setup switch.

◆ BLC : Enables a user to directly select a desired area from a picture, and to view

the area more clearly.

◆ HLC (High Light Compensation) : If the scene contains extremely bright light areas

such as; from car headlights, the light can mask out much of the on-screen detail

- LEVEL : Adjust level of the HLC function.

- LIMIT : Enable to change the operating condition.

- MASK COLOR/TONE : Change the color / transparency of the masking area.

(Black, Red, Blue, Cyan, Magenta)

- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced

◆ OFF : Not being used

3. Select a desired mode using the Function Setup switch and press the Function Setup switch.

◆ Select 'BLC' to adjust the area to be enhanced then adjust the level.

17

BLC SETUP

LEVEL

TOP

BOTTOM

LEFT

RIGHT

Press Set to Return

LOW

38

109

54

121

HLC SETUP

LEVEL

LIMITS

MASK COLOR

MASK TONE

TOP

BOTTOM

LEFT

RIGHT

Press Set to Return

MIDDLE

NIGHT ONLY

BLACK

120

5

1

5

172

☞

NOTE

■ Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance.

■ When dark, the HLC is only activated when a bright light exceeding a specific size in

NIGHT ONLY mode.

■ The HLC is not activated in day light or when bright light is not present at night in NIGHT

ONLY mode.

■ BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.

●

SPECO DNR Setting

This function reduces the background noise in a low luminance environment.

1. When the SETUP menu screen is displayed, select 'SPECO DNR' by using the

Function Setup switch so that the arrow indicates 'SPECO DNR'.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL

4.WDR

5.BACKLIGHT

6.SPECO DNR

7.DAY/NIGHT

8.SPECIAL

9.RETURN

ATW

OFF

OFF

ON

AUTO

SAVE

2. Select a desired mode using the Function Setup switch.

◆ OFF : Deactivates SPECO DNR. Noise is not reduced.

◆ ON : Activates SPECO DNR so that noise is reduced.

18

3. Set the SPECO DNR mode to 'ON' and press the Function Setup switch. Then you can adjust the noise reduction level.

☞

NOTE

■ You cannot set the SPECO DNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.

■ When adjusting the noise reduction level in the SPECO DNR mode, remember that the higher the level set, the more the noise level will be reduced, as will the brightness of the image.

●

Day/Night Setting

You can display pictures in color or black and white.

1. When the SETUP menu screen is displayed, select 'DAY/NIGHT'by using the

Function Setup switch so that the arrow indicates 'DAY/NIGHT'.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL

4.WDR

5.BACKLIGHT

6.SPECO DNR

7.DAY/NIGHT

8.SPECIAL

9.RETURN

ATW

OFF

OFF

ON

AUTO

SAVE

2. Select a desired mode using the Function Setup Switch according to the picture display you want.

◆ COLOR : The picture is always displayed in color.

◆ B/W : The picture is always displayed in black and white.

- BURST MODE : You can turn on or off the burst

signal on B/W mode.

B/W MODE SETUP

1.BURST MODE

2.RETURN

OFF

19

◆ AUTO : The mode is switched to 'Color' in a normal environment, but switches to

'B/W' mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the burst signal on B/W mode.

AUTO SETUP

- BURST MODE : You can turn on or off the burst signal

ON

on B/W mode.

- DURATION : You can select brightness of illumination

about changing the day/night mode.

- DWELLTIME : You can select the duration time about

changing the day/night mode.

→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s

1.BURST MODE

2.COLOR→B/W

DURATION

DWELL TIME

3.B/W→COLOR

DURATION

DWELL TIME

4.RETURN

FAST

3SEC

FAST

10SEC

FAST

SLOW

COLOR→B/W

2.5 lux

1 lux

B/W→COLOR

5 lux

10 lux

* The day/night switching point of the

camera can be adjusted.

☞

NOTE

■ When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR' mode and 'AUTO' mode can not be selected.

●

Special Setting

1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the

Function Setup switch so that the arrow indicates 'SPECIAL'.

1.LENS

MAIN SETUP

DC

2.EXPOSURE

3.WHITE BAL

4.WDR

5.BACKLIGHT

6.SPECO DNR

7.DAY/NIGHT

8.SPECIAL

9.RETURN

ATW

OFF

OFF

ON

AUTO

SAVE

20

2. Select a desired mode using the Function Setup switch.

SPECIAL

1.IMAGE ADJ

2.MONITOR

3.CAM TITLE

4.SYNC

5.MOTION DET

6.PRIVACY

7.COMM ADJ

8.LANGUAGE

9.RETURN

OFF

INT

OFF

OFF

ENGLISH

◆ IMAGE ADJ. :

1) When the SETUP menu screen is displayed, select 'IMAGE ADJ' by using the Function Setup switch so that the arrow indicates 'IMAGE ADJ'.

2) Select a desired mode using the Function Setup switch.

IMAGE SETUP

1.V-REV

2.H-REV

3.D-ZOOM

4.DIS

5.FONT COLOR

6.SHARPNESS

7.RETURN

OFF

OFF

WHITE

ON

* V-REV : You can flip the picture vertically on the screen.

* H-REV : You can flip the picture horizontally on the screen.

* D-ZOOM : You can use a digital zoom of x1 ~ x16.

* DIS (Digital Image Stabilizer) : This function mitigates any picture movement due

to external factors such as wind.

* FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)

* SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer.

Adjust this value appropriately depending on the sharpness of the picture.

* RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to the SETUP menu.

21

☞

NOTE

■ When the V-REV or H-REV mode is enabled, the text on the screen does not flip.

■ If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.

◆ MONITOR : Please change the settings value of video appropriate to your monitor.

1) LCD : Please select this menu item when using a LCD monitor.

2) CRT : Please select this menu item when using a CRT monitor.

3) USER : Please use this menu item when using a monitor other than standard ones. You can

change the gamma, PED level, and color gain in the sub menus.

◆ CAM TITLE : If you enter a title, the title will appear on the monitor.

1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates 'CAM TITLE'.

CAMERA TITLE SETUP

2) Set it to 'ON' by using the Function Setup switch.

3) Press the Function Setup switch.

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

4) Use the Function Setup switch to move to a desired letter and select the letter by pressing a b c d e f g h i j k l m n o p q r s t u v w x y z the Function Setup switch. Repeat this to enter multiple letters. You can enter up to 15 letters.

- . 0 1 2 3 4 5 6 7 8 9

←→CLR POS END

5) Enter a title, move the cursor to 'POS' and press the Function Setup switch. The entered title appears on the screen. Select the position to display the title on the screen by using the

Function Setup switch and press the Function

Setup switch. When the position is determined, select 'END' and press the Function Setup switch to return to the SPECIAL menu.

SHOP

☞

NOTE

■ When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.

■ Only English is available in this mode.

■ If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function

Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch.

◆ SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize

the output phase of multiple cameras using the power synchronization function

(Line-Lock) without using a synchronization signal generator.

22

- INT : Internal Synchronization Type

- L/L : Power Synchronization Type, Line-lock

* Press the Function Setup switch.

* You can select a desired phase from 0 to 359 when select 'phase'.

☞

NOTE

■ When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.

■ When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.

◆ MOTION DET :This product has a feature that allows you to observe movement of objects in 8 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected.

Activity can be monitor more efficiently.

1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow

MOTION DET

1.SENSITIVITY

2.AREA MODE

3.SEL POS

4.XPOS

5.YPOS

6.FILL → SET

7.RETRUN

AREA1

ON

L-TOP

3

5 indicates‘MOTION DET’.

2) Set up the mode using the Function Setup switch.

- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion

detection sensitivity is increased to recognize even small movement.

- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.

- SEL POS : Determines which of the 4 vertices of each MD area is to be used.

- XPOS : Determines the coordinate of the horizontal axis for SEL POS.

- YPOS : Determines the coordinate of the vertical axis for SEL POS.

- FILL→SET : Fills in a selected MD area. The color of the area can be selected from brown,

orange, blue, cyan, green, yellow, magenta and red.

- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.

◆ PRIVACY : Mask an area you want to hide on the screen.

PRIVACY AREA SETUP

1.AREA

2.MODE

3.MASK COLOR

4.MASK TONE

5.TOP

6.BOTTOM

7.LEFT

8.RIGHT

9.RETURN

AREA1

OFF

GREEN

1

39

79

13

52

23

1) When the SPECIAL menu screen is displayed, press the Function

Setup switch so that the arrow indicates 'PRIVACY'.

2) Set up the mode using the Function Setup switch.

- AREA : You can select up to 12 PRIVACY areas.

- MODE : Determines whether to use the area selected in the AREA.

- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.

- MASK TONE : Adjust the brightness of MASK COLOR.

- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.

- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.

Automatic Thermostatic Sensor!

1. Power off under -40 degree, the camera becomes frozen

2. On power on, the first temperature sensor starts working and makes heater work.

3. When the internal temperature in camera goes up to -10 degree,

the second temperature sensor starts working and Camera on.

In this status the first and second temperature sensor work together.

4. When the internal temperature in camera goes up to +10 degree,

the first temperature sensor turns off and the only second temperature

sensor keeps working.

●

RETURN Setting

Select a desired RETURN mode using the Function Setup Switch.

- SAVE : Save the current settings and RETURN the MAIN SETUP menu.

- NOT SAVE : Do not save the current settings and RETURN the MAIN SETUP menu.

- RESET : Resets the camera settings to the factory defaults. Language,

Communication and Monitor Settings are not initialized.

24

●

Trouble Shooting

PROBLEM

Northing appears on the screen.

The image on the screen is dim.

The image on the screen is dark.

POSSIBLE CAUSE

☞

Check the power cable, power supply output and video connection between the camera and monitor.

☞

Are the camera lens or the lens glass dirty?

Clean the lens / glass with a soft clean cloth.

☞

Adjust the monitor controls, as required.

☞

If the camera is facing a very strong light, change

the camera position.

☞

Adjust the lens focus.

☞

Adjust the contrast control of the monitor.

☞

If there is an intermediate device, correctly set the 75Ω/Hi-z.

☞

Check the camera is correctly connected to an appropriate

regulated power source.

☞

Has MOTION DET been set to ON in the menu?

☞

Has MD AREA been properly defined?

Motion Detection is not activated.

The color of the picture is not correct.

The image on the screen flickers.

The INTENSIFY does not work.

☞

Check the settings in WHITE BALANCE menu.

☞

Make sure that the camera isn’t facing direct sunlight or

fluorescent lighting. If necessary,change the camera position.

☞

Check that the AGC setting in the EXPOSURE menu is’t set to OFF.

☞

Check the EXPOSURE menu and make sure SHUTTER is set to------.

25

26

▶ MEMO

27

▶ MEMO

28

▶ MEMO

29

▶ MEMO

30

200 New Highway

Amityville, NY 11701

631-957-8700

1 800 645 5516 www.specotech.com