advertisement
▼
Scroll to page 2
of
58
IAQ Sampling Cassettes, Impactors & IAQ Accessories.....................................Pages 5 -15 IAQ Sampling Pumps, Accessories, Timers & Calibration Equipment.............Pages 17- 22 IAQ Instruments......................................................................................................Pages 23 - 43 IAQ Microscopes, Slides, Accessories & Analytical Supplies ........................Pages 45 - 48 Remediation & Safety Products . .........................................................................Pages 49 - 60 The Technology Leader Disposable Non-Viable Cassettes, Accessories & Kits................................................ 6-10 Reusable Non-Viable Samplers...........................11-12 Viable Samplers, Accessories & Kits......................13 IAQ Accessories.................................................. 14-15 IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Disposable Non-Viable Cassettes, Accessories & Kits the next generation of spore traps Utilizing a 360-degree impaction chamber, the Micro5 was pioneered to evenly & quantitatively collect aeroallergens such as pollens, mold & fungal spores, fibers, dander, insect components and other air-borne contaminants. The Micro5 is proven to have an exceptionally uniform collection trace and is virtually 100% accurate for the entire fungal spore range. (d50 is less than 1 micron!) To ensure optimal collection efficiency the Micro5 is designed to operate at a flow rate of 5 liters per minute. Patent # 6,692,553 5 5 liters minutes World Journal of Aerosol Science confirms ems circular impactors collect the widest range of contaminants. “The decrease of the jet-to-plate distance (in the EMS circular jet impactors) results in a critical decrease of the impactor’s cut-off size: from about 2.5 microns of the widely used slit impactors to about 1 micron. This makes such an impactor efficient for collecting spores of ALL fungal species and even some bacterial species.” -World Journal of Aerosol Science PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE MICRO5 CASSETTES, KITS AND ACCESSORIES 120138-M5 Inner Wall Samplers for Micro5, 10ea $12.95 $9.95 120142 Micro5 Basic Kit (w/ 3-30 LPM Megalite Pump) $329.00 $279.00 120144 Micro5 Deluxe Kit (w/ 3-30 LPM Megalite Pump) $429.00 $359.00 120169 Micro5 MicroCell 10 pack $69.00 $65.00 120170 Micro5 MicroCell 50 pack $299.00 $249.00 120173 Carry Case for Micro5 (customized foam for 1 to 3 GilAir-5 Pumps) $149.00 $99.00 120175 Micro5 Deluxe Kit w/ 1ea GilAir-5 Pump $795.00 $695.00 $2095.00 $1995.00 $7.50 $5.50 $349.00 $329.00 $229.00 $199.00 (Kit includes: Micro5 10 pack, tubing connectors, 1 GilAir-5 pump,Charger, Tool Kit and Carry Case) 120177 Micro5 Deluxe Kit w/ 3ea GilAir-5 Pumps (Kit includes: Micro5 10 pack, tubing connectors, 3ea GilAir-5 pumps, 3ea Chargers, 3ea Tool Kits and Carry Case) 120180 GilAir-5/Micro5 Stand Bracket 120148 Deluxe Inspector Kit (Kit includes: 2ea ExaminAir Pumps, 2ea Chargers, 2ea IAQ stands, 2ea 10pk Micro5, Travel Case) 120147 Basic Inspector Kit (Kit includes: 2ea ExaminAir Pumps, 2ea Chargers, 1ea 10pk Micro5, Travel Case) Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Disposable Non-Viable Cassettes, Accessories & Kits KITS KITS Deluxe Kit Basic Kit (w/ MegaLite Pump) (w/ MegaLite Pump) 120144 • ems MegaLite Pump w/ Mounted 3-30LPM Rotameter • 10 Pk Micro5 • 6ft of Vinyl Tubing • IAQ Stand • Heavy Duty Case 120142 • • • • • • • • • MegaLite Pump w/ Mounted 3-30LPM Rotameter 10 Pk Micro5 6ft of Vinyl Tubing IAQ Stand 20 Vacuum Dust Cassettes, Carpet Templates & Zip Bags 10 Wall Checks 5 Mold Swabs 10pk Mold Tape Slides Heavy Duty Case 120175 Deluxe Inspector Kit (w/ ExaminAir Pump) 120148 • 2ea ExaminAir Pumps • 2ea Chargers • 2ea IAQ stands • 2ea 10pk Micro5 • Travel Case Deluxe Kit (w/ GilAir-5 Pump) Programmable Clock - 5 Liters 5 Minutes Also available Micro5 Deluxe Kit w/ 3ea GilAir-5 Pumps #120177 Basic Inspector Kit (w/ ExaminAir Pump) 120147 • Micro5 10 pack • Tubing connectors • 1 GilAir-5 pump • Charger • Tool Kit • Carry Case Environmental Monitoring Systems • 2ea ExaminAir Pumps • 2ea Chargers • 1ea 10pk Micro5 • Travel Case Toll Free: 1.800.293.3003 emssales.net IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Disposable Non-Viable Cassettes, Accessories & Kits pump Professional Mold and Allergen Test Kit Lab Analysis Form TM Distributed exclusively by: instructions & information air sampling cassettes Detects: ask Caroline Receive with purchase: free 20 minute consultation with America’s Healthy Home Expert! P mold P Ready to use pump P 4 air sampling cassettes P STEP BY STEP instructions P Lab Analysis Form P pollen P spores P pet dander P Box with pre-paid postage P Mold & Allergen Information P All Lab fees included Pump is ready to use and features EASY operation with automatic cut-off at the end of each sampling cycle. The outdoor air sampling cassette serves as a baseline measurement for the quantity and type of local fungi present in the environment. The indoor cassettes allow you to test “suspect” areas in the home or business. After sampling, simply return the kit and paperwork to our laboratory for a complete microscopic analysis. (Box has pre-paid mailing label included.) Within one week, you will receive a detailed and interpretive report of allergens and molds that are present in the home or business. All laboratory fees are included with the purchase of this kit. Call toll free for more information 866-743-8563 PART # PRODUCT DESCRIPTION EXAMINAIR PROFESSIONAL ALLERGEN AND MOLD TEST KIT 1700000 ExaminAir Professional Allergen and Mold Test Kit - Call toll free for more information 866-743-8563 Ideal Product for Home Inspectors! Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Disposable Non-Viable Cassettes, Accessories & Kits D Patent # 6,463,814 Allergenco UDY! NEWLY RELEASED ST Please call or visit emssales.net to receive a comprehensive Allergenco-D study conducted by the University of Cincinnati’s Environmental Health Foundation 120515 & 120517 120518 The Allergenco-D sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, environmental dusts, construction dusts and other airborne particulates. The Allergenco-D employs a patented laminar flow venturi which provides higher readable collection efficiency as well as a more well defined impaction trace, helping to reduce analysis time. Laminar Flow Venturi allows for the most uniform slit deposit in the industry Patented Design Higher Collection Efficiency Than Other Slit Impactors Inner Wall Sampling Attachments Available No Luer Adaptors Necessary - tubing fits directly onto cassette Compatible with all portable pumps designed to fit competitors cassettes Allergenco-D Allergenco-D Deluxe Kit Basic Kit • ems MegaLite Pump w/ Mounted 3-30LPM Rotameter • 10 Pk Allergenco-D • 6ft of Vinyl Tubing • IAQ Stand • Heavy Duty Case 120512 120513 • ems MegaLite Pump w/ Mounted 3-30LPM Rotameter • 10 Pk Allergenco-D • 6ft of Vinyl Tubing • IAQ Stand • 20 Vacuum Dust Cassettes, Carpet Templates & Zip Bags • 10 Wall Checks • 5 Mold Swabs • 10pk Mold Tape Slides • Heavy Duty Case Environmental Monitoring Systems PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE ALLERGENCO-D CASSETTES, KITS AND ACCESSORIES 120515 Allergenco-D Cassettes / 50 Pack $299.00 $249.00 120517 Allergenco-D Cassettes / 10 Pack $75.00 $59.00 120518 Allergenco-D Inner Wall Samplers / 10 Pack $12.95 $9.95 120512 Allergenco-D Deluxe Kit $429.00 $379.00 120513 Allergenco-D Basic Kit $329.00 $249.00 Toll Free: 1.800.293.3003 emssales.net IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Disposable Non-Viable Cassettes, Accessories & Kits cyclex-d “The impactor collection efficiency was found to be higher than that of the Air-O-Cell™ and Burkard samplers.” -The University of Cincinnati Environmental Health Foundation cyclex-d Deluxe Kit (1) ems MegaLite Pump w/ mounted 3-30LPM Rotameter #120141 (1) 10 Pack cyclex-d (1) 6ft of Vinyl Tubing (1) IAQ Stand Utilizing a 360-degree impaction chamber, the cyclex-d was pioneered to evenly and quantitatively collect aeroallergens. With a flow rate of 20 liters per minute the capture and actual collection efficiency of the cyclex-d exceeded 50% at d50=1u (20ea) Vacuum Dust Cassettes, Carpet Templates & Zip Bags (10ea) Wall Checks (5ea) Mold Swabs (1) Heavy Duty Case Air-O-Cell™ Deluxe Kit Kit (1) ems MegaLite Pump w/ mounted 3-30LPM Rotameter (1) 10 Pack cyclex-d (1) 6ft of Vinyl Tubing (1) Heavy Duty Case (1) IAQ Stand (10) Mold Tape Slides #120145 compared to the industry norm of 2.5 microns! cyclex-d Air-O-Cell™ Cassettes The Air-O-Cell™ is a unique air sampling cassette specifically designed for the rapid collection of a wide range of airborne aerosols including mold spores, pollen, insect parts, skin cell fragments, fibers (e.g. asbestos, fiberglass, cellulose, clothing fibers, etc.) and inorganic particulates (e.g. ceramic, fly ash, copy toner, etc.). #120510 (1) ems MegaLite Pump w/ mounted 3-30LPM Rotameter (1) 10 Pack Air-O-Cell™ (1) 6ft of Vinyl Tubing (1) IAQ Stand (20ea) Vacuum Dust Sampling Cassettes, Carpet Templates & Zip Bags (5ea) Mold Swabs (10) Mold Tape Slides (1) Heavy Duty Case Air-O-Cell™ Kit PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE cyclex-d CASSETTES, KITS AND ACCESSORIES 120135 cyclex-d 50 Pack $299.00 $269.00 120137 cyclex-d 10 Pack $69.00 $65.00 120138 cyclex-d Inner Wall Samplers (10 each) $12.95 $9.95 120141 cyclex-d Kit $329.00 $279.00 120145 cyclex-d Deluxe Kit $429.00 $359.00 Air-O-Cell™ CASSETTES, KITS AND ACCESSORIES #120509 (1) (1) (1) (1) (1) 10 ems MegaLite Pump w/ mounted 3-30LPM Rotameter 6ft Length of Tubing 10 Pack Air-O-Cell™ Heavy Duty Case IAQ Stand Toll Free: 1.800.293.3003 emssales.net 120503 Air-O-Cell™ Cassettes / 10 Pack $79.00 $75.00 120505 Air-O-Cell™ Cassettes / 50 Pack $329.00 $287.50 120506 Air-O-Cell™ Wall Sampling Attachment / 10 $12.95 $9.95 Pack 120509 Air-O-Cell™ Kit $349.00 $339.00 120510 Air-O-Cell™ “Deluxe” Kit $449.00 $429.00 providing environmental products for a safer tomorrow IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Reusable Non-Viable Samplers CyClex Reusable and more cost effective than disposable impactors. The CyClex utilizes a unique 360 degree aluminum impaction chamber designed to enhance performance and efficiency associated with Bioaerosol sampling. The CyClex has the ability to evenly and qualitatively collect aeroallergens such as pollens, mold and fungal spores, fibers, dander, insect components and other airborne contaminants. In addition, the CyClex has the distinguishing feature of having the ability to collect air and inner wall samples, making it the most cost effective and feasible impaction device on the market. Advantages: • Cost effective • Convenient and easy to use. • The CyClex has the ability to collect below 1 micron. • ONLY non-viable sampler in which calibration can be checked with a NIST certified primary standard (i.e. DryCal, Gilibrator, etc.). • 360 degree design ensures optimal sampling collection. • Threaded lid allows for effortless opening and slide removal. • The CyClex may be attached to any high volume pump capable of pulling 20 liters/minute. #120160 CyClex Deluxe Kit (1) CyClex Impactor (1) ems MegaLite pump w/ mounted 3-30LPM Rotameter (1) Multi-accessory Adapter Cap (25 ea) Wall Probes with Debris Cap (1) 100ft of Vinyl Tubing (enough for 25 samples) (1) Stud Sensor (1) Hand Drill w/ 1/4” Drill Bit (1) Debris Cap Removal Rod (25 ea) Prepared Slides with 25 Slide Mailers (20 ea) Vacuum Dust Sampling Cassettes (20 ea) Vacuum Templates (20 ea) Vacuum Zip Bags (1) IAQ Stand (1) Heavy Duty Case #120155 CyClex Standard Kit (1) CyClex Impactor (1) ems MegaLite pump w/ mounted 3-30LPM Rotameter (1) 6ft length of tubing (1) IAQ Stand (1) Heavy Duty Case PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE CYCLEX BIOAEROSOL IMPACT SAMPLER & KITS 120150 CyClex BioAerosol Impact Sampler Only $299.00 $259.00 120155 CyClex Kit w/ ems MegaLite Pump, 3-30LPM Rotameter, $649.00 $595.00 $995.00 $949.00 $229.00 $189.00 Tubing, Stand & Case 120160 CyClex Deluxe Kit (see above for complete description) CYCLEX WALL KIT 120163 I.W.S. (Inner Wall Sampling) System for CyClex #120163 CyClex Wall Kit CYCLEX ACCESSORIES 120167 Multi-Accessory Adapter (for use w/ IWS & Calibration) $149.00 $129.00 120103 Telescopic Sampling Stand for IAQ Impactors $39.95 $37.95 120104 ems MegaLite IAQ Pump, Mounted 3-30LPM Rotameter w/ Tubing $249.00 $169.00 120910 Stud Finder Only $14.95 $14.95 120909 Hand Drill $14.95 $14.95 120908 Drill Bit for Hand Drill $8.95 $8.95 120921 Debris Cap Removal Rod $8.95 $6.95 120923 Replacement Wall Probes for IWS System (25 each) $24.95 $19.95 120926 1ea Prepared Slide with slide mailer **No Cross Contamination** $2.50 $2.50 120927 25ea Prepared Slides (Individually Packaged w/ Slide Mailers) $49.95 $39.95 **No Cross Contamination** 400169 25 Capacity Slide Box Only $4.75 $3.95 400170 5 Capacity Slide Mailers $0.99 $0.69 200141 Tubing, 1/4” x 3/8” OD x 100’ $25.00 $19.95 Environmental Monitoring Systems (1) CyClex Multi-Accessory Adapter Cap (25ea) Wall Probes w/ Debris Cap (1) 100ft of Vinyl Tubing (enough for 25 samples) (1) Stud Finder (1) Hand Drill w/ 1/4” Drill Bit (1) Debris Cap Removal Rod (25ea) Prepared Slides w/ 25 Slide Mailers (1) Heavy Duty Case now prepared with posi-track bar coded slides! Prepared Slides (120926 & 120927) Toll Free: 1.800.293.3003 emssales.net 11 IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Reusable Non-Viable Samplers ALLERGENCO MK III timed sequential sampler 120119 At the end of the sampling time, a quick procedure to ems Allergenco Calibration Rotameter prepare the slide for microscopical reading only requires placing a few drops of Calbera’s stain onto the collecting surface, a glass cover slip over traces. The slide is then ready for observation/counting microscopically. No sticky tapes, or tiny rods to deal with. Quick Facts: Industry Standard for 10 Years Collects aeroallergens (i.e.) pollens, mold, dander, dust mites, etc. Timed sequential Sampler – Up to 24 samples on one slide Program the sampler to pull samples from minutes to days apart. Fully self contained with AC or DC operation 120120-Rotameter BioSIS Slit Impaction Air Sampler The BioSIS was developed for the sampling and collection of air-borne contaminates for quantifiable analysis of pollen, mold spores, skin fragments, insects, combustion particles, toners, environmental dust, construction dust and other air-borne particulates. Employing a slit impaction sampling technology, the BioSIS was created to answer the need for a low cost, reusable, high quality, bioaerosol sampler for aeroallergen studies. Patent # 7,051,605 Advantages: Reusable two piece aluminum design offers greater durability and reduces sampling costs. The laminar flow venturi produces a more defined impact zone. Allows for quick and easy clean up between samples to prevent cross contamination in the field. Uses conventional high volume vacuum pumps and standard 25mm X 75mm microscope slides. PART # PRODUCT DESCRIPTION 120146 LIST PRICE ems PRICE Allergenco MKIII KITS 120119 Allergenco MK-III Sampler Deluxe Kit $1195.00 $1195.00 120120 Allergenco Basic Package $1095.00 $995.00 Includes: Unit, AC Power Supply, Battery, Battery Charger, 25 Prepared Slides & Carry Case Includes: Unit, AC Power Supply, 25 Prepared Slides & Carry Case Allergenco MKIII ACCESSORIES 120120-ROTAMETER ems Allergenco Calibration Rotameter $89.95 $79.95 120121 Unit Power Supply $29.95 $29.95 120123 Battery System (Battery, Charger & Bag) $199.00 $199.00 120122 Customized Case for Allergenco $129.00 $129.00 120130 Bottle of Silicone Grease 120126 25 Prepared Allergenco MKIII Slides & Mailers $6.95 $6.95 $49.95 $39.95 BioSIS Slit Impaction Air Sampler 12 120146 BioSIS Slit Impaction Air Sampler (impactor only) (BioSIS kits are also available....PLEASE CALL FOR COMPLETE DETAILS!) $299.00 $259.00 120927 25 Prepared BioSis Slides & Mailers $49.95 $39.95 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES Viable Samplers, Accessories & Kits ems E6 Reusable Single-Stage VIABLE Sampler The single-stage bioaerosol impaction sampler is an aluminum device held together by three spring clamps and sealed with o-ring gaskets. The impactor stage contains 400 precision-drilled holes. When air is drawn through the sampler, multiple jets of air on the stage direct any airborne particles 120101 toward the surface of the agar collection surface. To ensure sample integrity the ems E6 must be used with a pump capable of 28.3Lpm. PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE 120107 E6 viable Sampler, KITS And Accessories 120101 ems E6 Sampler (Impactor Only) $399.00 $349.00 120103 Telescopic Sampling Stand for ems E6 $39.95 $37.95 120107 ems E6 Sampler Kit (Includes Impactor, ems MegaLite Pump, Rotameter, Stand & Carrying $679.00 $499.00 Case) 120108 ems E6 Sampler Kit (Includes Impactor, Gast Pump, Rotameter, Stand & Carrying Case) $799.00 $699.00 120110 Calibration Leak Test Kit (compatible with ems E6, Aerotech A6, Andersen N6) $15.95 $14.95 $29.75 $29.75 BIOCASSETTE™ DISPOSABLE CULTURABLE AIR SAMPLER 120102 BioCassette (5 Pack) - Please note: This product has special shipping requirements. The E6 utilizes standard agar plates. BioCassette™ DISPOSABLE CULTURABLE CASSETTE The BioCassette™ developed by Environmental Microbiology Laboratory, Inc. (EMLabTM) is a new device for culturable air sampling that is designed to both simplify the sampling process and protect the integrity of samples from sampling through analysis. The BioCassette™ combines the agar plate and 120102 sampling device into a single disposable cassette in a package that is roughly the size of a standard 90mm petri dish. Since the agar plate and the sampling device are integrated into one unit, the BioCassette™ is both simpler and faster to use than a device that uses a separate petri dish. The Andersen™ sampler has a recommended cleaning procedure that should be carried out prior to each sample. The sampler then requires disassembly to load the media and reassembly prior to sampling. And then, of course, disassembly to remove the petri dish and reassembly prior to moving or storing the sampler. This is followed by the need to secure the petri dish lid with parafilm or similar laboratory tape. The BioCassette™ requires only the removal of a plastic plug and sealing label for sampling. Replace these components after sampling and the device is ready to ship to the laboratory. Environmental Monitoring Systems ! This product has special shipping requirements. Please call for details. Toll Free: 1.800.293.3003 emssales.net ! 13 IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES IAQ Accessories ems Mold Tape Slide™ Dust Collector Kit NEW THINNER MOLD TAPE DESIGN! Ideal for surface sampling Easier to handle than tape. 90 degree flexibility Uniform sample size Individually packaged to protect slides during transport Prevents cross contamination Bar-coded serial numbers for easy traceability Catalog # 120904 • EuroPro Shark Handheld Vacuum with attachments and case! • 10 ems Dust Collectors • 10 zip bags (for shipping Dust Collector to lab after collection) • 8 Mold Tape Lifts, 8 Microscope slides and 4, 2pk mailers • 10 Mold Swabs Posi-Track Slides Easier and more accurate tracking with new barcoded Posi-Track slides! 900199 Catalog # 120901 Mold Check Swabs 50/pk Catalog # 900202 Vacuum Dust Kit 20ea - 25mm 0.45u Molded Sampler 20ea - Zip Bags 20ea - Templates 20ea - Labels Mold Tape Lift Kit Catalog # 120903 PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE INDOOR AIR QUALITY ACCESSORIES 120103 Telescopic Sampling Stand for Impactors $39.95 $37.95 120901 Mold Check Swabs 50/pk $29.95 $24.95 120903 Mold Tape Lift Kit (Includes 4 Tape Lifts, 4 Microscope Slides & 2, 2pk mailers) $3.49 $3.29 120904 Mold Tape Slide (10 slides per pack, individually packaged with mailers) $7.99 $6.99 120926 1 ea Prepared Slide with Slide Mailer (Used with Cyclex & BioSIS impactors) $2.50 $2.50 120927 25 ea Prepared Slides (Individually Packaged w/ Slide Mailers.) Used with Cyclex & BioSIS impactors $49.95 $39.95 120126 25 ea Prepared Slides (Individually Packaged w/ Slide Mailers.) Used with Allergenco-MKIII & MK4 Samplers $49.95 $39.95 AIR CURRENT TUBES 600171 Draeger Air Current Tubes (10 Tubes) (Non-Irritant Smoke) $59.00 $55.00 600172 Draeger Air Current Tube Kit (10 Tubes) (Non-Irritant Smoke) $99.50 $99.50 VACUUM DUST SAMPLING KITS 900199 ems Dust Collector Kit $189.00 $169.00 900200 ems Dust Collector (1 Collector / Filter) $8.95 $6.95 900202 Vacuum Dust Sampling Kit - 20 ea. MCE $49.95 $39.95 $49.00 $45.00 (25mm 0.45u MCE Includes 20ea Samplers, Templates, Zip Bags& Labels) 900205 14 10cm x 10cm Templates 250ea Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ SAMPLING CASSETTES, IMPACTORS & IAQ ACCESSORIES IAQ Accessories PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE TYGON Tubing TUBING & ACCESSORIES 200140 Tubing, Tygon 1/4” ID x 3/8” OD x 50’ $65.00 $55.00 200141 Tubing, 1/4” ID x 3/8” OD x 100’ (Generic Brand) $25.00 $19.95 200157 Tubing, 1/8” ID x 1/4” OD x 100’ (Generic Brand) $25.00 $19.00 200140 GLOVES 700110-L Nitrile Gloves , non-latex, powder free, (100/pk) Large $12.95 $8.95 700110-XL Nitrile Gloves, non-latex, powder free, (100/pk) X-Large $12.95 $8.95 700108-S Latex Gloves w/ Powder 100/ea (Small) $12.95 $11.95 700108-M Latex Gloves w/ Powder 100/ea (Medium) $12.95 $11.95 700108-L Latex Gloves w/ Powder 100/ea (Large) $12.95 $11.95 700109-S Latex Gloves w/o Powder 100/ea (Small) $12.95 $11.95 700109-M Latex Gloves w/o Powder 100/ea (Medium) $12.95 $11.95 700109-L Latex Gloves w/o Powder 100/ea (Large) $12.95 $11.95 Nitrile Gloves 700110-L, 700110-XL Superior Sampling Cassettes Proudly Manufactured in the USA Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 15 proud to manufacture in the USA IAQ Sampling Pumps and Accessories........ 18-20 Pump Timers........................................................ 21 IAQ Calibration Equipment & Accessories........... 22 IAQ SAMPLING PUMPS, ACCESSORIES, TIMERS & CALIBRATION EQUIPMENT ems ems IAQ Sampling Pumps and Accessories ems The Original Lite Pump MegaLite PERFECT FOR IAQ TESTING Standard Features: Specifications: • • • • • Weight: 4.5 lbs Length: 5 in Height: 4 in Sound: 75 db Mega Lightweight Compact for easy transportation Mega Quiet (70% quieter) Mega Long-Life Suction Cup Feet 120104 120104-filter optional MegaLite Contamination filter Great for Micro5, cyclex-d, Allergenco-D, Air-O-Cell™, Cyclex, BioSIS, E6, N6 & A6 impactors! ems Rotary Vane Pump • COMES W/ MOUNTED ROTAMETER • Most durable and long-lasting rotary vane pump on the market. Internal metal parts are now stainless steel. • On/Off switch located on the housing, not the cord. • Internal muffler chamber PART # Specifications: Weight: 12.25 lbs Length: 7.75 in Height: 4.75 in Width: 5 in Sound: 69 db PRODUCT DESCRIPTION 120106-EMS LIST PRICE ems PRICE INDOOR AIR QUALITY HIGH VOLUME PUMPS 18 120104 ems MegaLite 3-30lpm IAQ Pump w/ Tubing & Rotameter $249.00 $169.00 120104-filter MegaLite Cross Contamination Kit $19.95 $14.95 120104-mflr MegaLite Free Flow Exhaust Muffler $.99 $.75 300122 MegaLite Plastic Back Plate $8.99 $8.99 300126 MegaLite Plastic Face Plate $8.99 $8.99 300127 MegaLite Feet (Suction Cups) $3.50 $3.50 300128 MegaLite Feet Isolators $1.20 $1.20 120106-EMS ems Rotary Vane Pump w/ Mounted Rotameter $299.00 $249.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ SAMPLING PUMPS, ACCESSORIES, TIMERS & CALIBRATION EQUIPMENT IAQ Sampling Pumps and Accessories Examinair Micro5 Pump Designed for use with Micro5 Air Sampling Cassettes 1700001 Quantity Pricing Available Standard Features & Specifications: Comes Complete with Charger (12-15 Samples per full Charge) Built-In Handle Weight: 2lbs Height: 3” Width: 4 ¾” Length: 7 ¼” This re-chargeable, compact pump is ready to use and features EASY operation with automatic cut-off at the end of each 5 MINUTE sampling cycle. The durable design offers a built-in handle, lightweight casing, and conveniently mounts to a tripod. To guarantee quality assurance, EVERY ExaminAir Micro5 pump undergoes a pre-calibration certification. 5 5 liters minutes Calibration Rotameter ExaminAir Mico5 Pump Calibration Rotameter (1-5 Liters) Buck BIOAIRE Pump • Small Lightweight and compact • Battery powered and rechargeable • 5 hour run time at 15LPM • Convenient timer for 1, 2, 5, 10 minute samples and Continuous Mode • End-of-cycle audible & visual • Easy keypad calibration without tools 120164 Accepts Allergenco-D, Buck BioAire and Air-O-Cell™ cassettes 120120-P mini-Buck Calibrator M-30B Gast 3-30Lpm IAQ Pump 500112 Great for Micro5, cyclex-d, Allergenco-D, Air-O-Cell™, Cyclex, BioSis, E6, N6 & A6 impactors! Standard Features: • Extremely Quiet • Durable & Economical • Rotary Vane • Internal Muffler Chamber PART # 120106 Environmental Monitoring Systems • • • • No Glass Jars Adjustable flow 3LPM - 30LPM 1/10 hp Motor 10 lbs Use W/ the Buck BioAire Pump Only PRODUCT DESCRIPTION LIST PRICE ems PRICE INDOOR AIR QUALITY HIGH VOLUME PUMPS 1700001 Examinair Micro5 Pump $149.00 $149.00 120106 Gast 3-30 lpm IAQ Pump w/ Tubing & Rotameter $349.00 $299.00 120120-P ExaminAir Mico5 Pump Calibration Rotameter (1-5 Liters) $89.95 $79.95 120164 Buck BIOAIRE Pump $679.00 $579.00 500111 Buck Calibration Soap 8 ounces $25.00 $25.00 500112 mini-Buck Calibrator M-30B (Use W/ the Buck BioAire Pump Only) $970.00 $970.00 500113 mini-Buck Calibrator M-30 (Primary Standard) $950.00 $950.00 Toll Free: 1.800.293.3003 emssales.net 19 IAQ SAMPLING PUMPS, ACCESSORIES, TIMERS & CALIBRATION EQUIPMENT IAQ Sampling Pumps and Accessories ems Standard Features: • NIST certifiable – Connects “directly to Bios Defender or any primary standard” AC/DC • 12 volt battery eliminates the need to carry external power cords • Voltage indicator monitors battery charge • Flow capability of 5-22 liters per minute “ Whisper” quiet performance IAQ Pump • Convenient storage compartments • Safety reset switch • Built in rotameter with adjustable flow control • Supplied charging system • AC or DC operation (battery can be charged when operating in AC mode!) • Quick 1 ½ hour battery charge • Averages 3 hours of performance between charges • HEPA Filtered exhaust system (internally filtered exhaust does not disturb sampling environment - NO CROSS CONTAMINATION ISSUES!) • User Friendly programmable timer for hands off operation • Color changing timer indicates Run/Stop operation mode with sample time • Lightweight – weighs only 15lbs. • Durable carry case 120158 Completely Battery Powered! ems • Six months warranty on parts & labor DC Pump both compatible with CyClex, cyclex-d, Micro5, Allergenco-D, Air-O-Cell™, BioSIS or any other nonrestrictive sampling device. Standard Features: • 12 volt battery eliminates the need to carry external power cords • Voltage indicator monitors battery charge • Flow capability of 5-30 liters per minute • Quiet performance • Convenient storage compartments • Safety reset switch 120157 PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE AC/DC IAQ PUMP 20 120158 AC/DC IAQ Pump $649.00 $599.00 120157 DC Pump $699.00 $639.00 Toll Free: 1.800.293.3003 emssales.net • Built in rotameter with adjustable flow control • Built in charging system • Durable case • Averages 2 hours of performance between charges • Six months warranty on parts & labor • Digital Timer • NIST certifiable providing environmental products for a safer tomorrow IAQ SAMPLING PUMPS, ACCESSORIES, TIMERS & CALIBRATION EQUIPMENT Pump Timers ems heavy-duty Count-Down TIMER120 volt Programmable Timer Switch Features: • Program up to 12 On/Off switchings per day or week • Program for individual days or Mon-Fri, Mon-Sat, Mon-Sun, Sat-Sun Features: • Easy to install and operate • Automatic Shut-Off • Three prong plug and socket • No Programming Necessary for connection • 1 Button Operation • LCD displays day, time and • 120 Volts program function • Digital Display • “Override” interrupts existing • Mutiple Outlets 120118 program • Durable • Built-in time clock with 1 yr • Lightweight battery back up • Convenient • Includes 8’ power cord • Maintains memory for 1 yr 120117 • UL listed ems effortless count-down timer • Simple One button operation • Select the desired run time from 1min to 24 hours push the start button – its that simple • The unit simply counts down from selected time. No entering in time, hour, date or start, stop as with competitive products • Integrated battery retains selected time so that user input is necessary only for changes • Perfect for using ems MegaLite, ems Rotary Vane, Gast and Thomas pumps. • No more getting down on your knees to see the display – the display on this unit swivels to allow for upright viewing. 120116 PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE PUMP TIMERS 120117 Programmable Timer Switch $49.95 $39.95 120116 ems Effortless Countdown Timer (10 amp maximum) $39.95 $35.00 120118 ems Heavy Duty Countdown Timer (15 amp maximum) $89.95 $79.00 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 21 IAQ SAMPLING PUMPS, ACCESSORIES, TIMERS & CALIBRATION EQUIPMENT IAQ Calibration Equipment & Accessories Defender Primary Flow Calibrator Announcing the new Bios Defender, the “next generation” of the very popular DC-Lite and DC-2 primary calibrators. The Bios Defender is the existing DryCal® technology, evolved. The revolutionary dry flow meter design provides users with a primary flow standard for industrial hygiene, environmental & laboratory applications. The Bios Defender, at a Glance Accuracy • Proven – percent of reading accuracy is supported by ISO 17025 accreditation by NVLAP of NIST • Integrated temperature sensors and pressure transducers – placed directly in the flow stream for optimum standardized results (Bios Defender 520) Convenience • Lighter and more robust than its predecessors – ideal for field use • Housed in a molded case with rubber handgrips for a better feel and a sleeker, more contemporary look • Navigation menu and a large, illuminated graphical display with zoom feature, rated for extreme cold operation, down to -20 degrees C • RoHS compliant for Europe (Restriction of Hazardous Substances) Flexibility • Choose between flow units – mL, L, cc, or cfm • Include up to one hundred readings in a group average • Take individual readings, continuous hands-free readings, or set to read in time intervals, anywhere from one minute up to sixty minutes between readings • Software – an integrated serial PC interface and software for bullet-proof transfer of flow data to a text file, and automatic recording and graphing of flow measurements. A software upgrade is available for the creation of air sampler profiles, sampler calibration data recording and storage, calibration report printing, and other capabilities PART # PRODUCT DESCRIPTION LIST PRICE 500315 (case only) ems PRICE BIOS DRYCAL® DEFENDER PRIMARY AIR FLOW METERS AND ACCESSORIES 500301 Bios DryCal® Defender 510-L 5ml - .5 liters per minute $1,300.00 $1,295.00 500305 Bios DryCal® Defender 510-M 50ml - 5 liters per minute $1,300.00 $1,295.00 500311 Bios DryCal® Defender 510-H 300ml - 30 liters per minute $1,350.00 $1,345.00 500315 Custom Pelican Case for Bios DryCal® Defender $89.95 $79.95 500114 18” Calibrator Connection Tubing $2.99 $2.99 Secondary Calibrators PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE 500159 500163 Precision & Economy Field Rotameters & Accessories 22 500159 ems Economy Field Rotameter, 2 - 20 LPM (Includes 2 Brass Barb Adapters) $39.00 $35.00 500163 ems Economy Field Rotameter, 3 - 30 LPM (Includes 2 Brass Barb Adapters) $39.00 $35.00 500151 200117 Brass Barb Adapter for Rotameter 1/8” $1.50 $1.25 Precision & Field Rotameters 500151 Precision Rotameter, 4.2-42LPM $195.00 $195.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow Infrared Cameras.......................................... 24-25 Borescope Kits & Accessories.........................26 Particle Counters.......................................... 27-28 Gas Monitors/Gas Detection Tubes & Kits..... 29-34 Moisture Meters............................................ 35-39 Temperature/ Relative Humidity Meters..... 40-41 Psychrometer.....................................................42 Infrared Laser Thermometers...........................42 Anemometers.....................................................43 IAQ INSTRUMENTS Infrared Cameras ThermaCAM BCAM Infrared Camera Ultra-compact & Affordable The BCAM® infrared camera offers a non-invasive means of monitoring and diagnosing the conditions of buildings - providing immediate high-resolution thermal imagery, revealing potential structural and moisture issues, energy efficiency and even rodent or pest discovery. • • • • • • • • • 120524 Find Problems Fast Rugged, Ergonomic & Lightweight Flexible JPEG Image Storage Pinpoint Problems With Precision View Sensitive Thermal Images Download and Document Smart Power Management Automatic Color Alarm Fast Detection For Fast Action ThermaCAM BCAM SD Infrared Camera Sharper images and more image storage. 33% improved image quality! Circuit Breaker The new and improved SD model of the BCAM offers more image storage, more image quality and more postprocessing capabilities. The BCAM SD infrared camera provides a non-invasive means of monitoring and diagnosing the conditions of buildings. • • • • • • • • 120524-SD Leak Stores up to 1,000 JPEG Images Improved Crisp, High Quality Images 7 Hour Battery Operating Time Bright 3.5” LCD display Built-in Laser LocatIRTM Includes New Powerful QuickReport Software Easy-to-Operate Dew Point, Insulation & Color Alarm Features Cold Air ThermaCAM B2 Infrared Camera Ultra-compact, lightweight infrared camera for building inspections 120525 The B2 infrared cameras offer a noninvasive means of monitoring and diagnosing the condition of buildings. They provide immediate documentation of: • • • • • • • • Termites As-built or postrestoration quality Post-casualty cause and origin data Plumbing and building envelope water leakage Post-flood and fire water-damaged assessment Energy use inefficiency, roofing Rodent or pest discovery Auto shut-off Comes with 2 lithium batteries Pipe Block 24 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ INSTRUMENTS Infrared Cameras BCAM SD ThermaCAM BCAM B2 Imaging Performance Field of view (min focus) with US FPA Fixed 25° x 25°(0.3m) Fixed 25° x 25°(0.3m) Thermal sensitivity < 0.15 °C at 25 °C < 0.15 °C at 25 °C Exchangable 25° x 19°(0,3 m) , 12° x 9°(1.2 m) or 45° x 36°(0.1 m); < 0.10 °C at 25 °C Detector type with US FPA Focal Plane Array (FPA), uncooled microbolometer, 120 x 120 pixels Focal Plane Array (FPA), uncooled microbolometer, 120 x 120 pixels Focal Plane Array (FPA), uncooled Vanadium Oxide micro bolometer, 160 x 120 pixels - 50/60 Hz Digital zoom Spectral range Image presentation Video output LCD Display N/A 7.5 TO 13 µm N/A 7.5 TO 13 µm N/A 7.5 TO 13 µm MPEG-4 over USB 3.5 inch color LCD - 240 x 240 pixels MPEG-4 over USB 3.5 inch color LCD - 240 x 240 pixels NTSC, standard RCA composite video 2.5 inch color LCD - 320 x 240 pixels Image controls level, span, auto adjust (continuous/manual) level, span, auto adjust (continuous/manual) level, span, auto adjust (continuous/manual) Palettes Color & B/W Color & B/W Iron, Rainbow, HC Rainbow, B/W, B/W inv, .-10°C to 100°C (+14°F to +212°F) .-10°C to 100°C (+14°F to +212°F) .-20°C to 100°C (-4°F to +212°F) 1 Fixed Above or Below No Yes Yes 1 Fixed Above or Below No No No Measurement Temperature range Measurement Functions Spot meters Color Alarm Audible Alarm Dew Point Alarm Insulation Alarm Image Storage 1 Movable. Area min/max/average Above or Below Yes Yes No Digital storage functions Store, Delete all images, Delete image, Open Store, Delete all images, Delete image, Open Freeze, Store, Delete all images, Delete image, Open Image storage capacity 1000JPEG images, removable SD Card (128MB included) 50 JPEG images >200 Radiometric JPEG images Software ThermaCAM QuickView software ThermaCAM QuickView™ software ThermaCAM QuickView™ software ThermaCAM QuickView software Hardware interface USB (Cable included) USB (Cable included) RS-232 (optional) and USB (Cable included) Battery Batteries Included Type Operating time Class 2 Semiconductor AlgalnP Diode Laser: 1mW/635 nm (red) Class 2 Semiconductor AlgalnP Diode Laser: 1mW/635 nm (red) Class 2 Semiconductor AlgalnP Diode Laser: 1mW/635 nm (red) 1 Li-Ion 7 hours, Display shows battery status 1 Li-Ion 7 hours, Display shows battery status Power saving Automatic shutdown (user-selectable) Automatic shutdown (user-selectable) In camera, AC adapter or 12V from car with optional 12V cable N/A In camera, AC adapter or 12V from car with optional 12V cable N/A 2 Li-Ion 2 hours, Display shows battery status Automatic shutdown and sleep mode (userselectable) In camera, AC adapter or 12V from car with optional 12V cable Included Date/time,Language (English, Spanish), Info field, LCD intensity (high/normal/low), power down Date/time,Language (English, Spanish), Info field, LCD intensity (high/normal/low), power down Date/time, Language (English,Spanish), Scale, Info field, LCD intensity (High/Normal/Low) Environmental Operating temp. Range Storage temp. Range .-15° C to +50° C(+5° F to 122° F) .-20° C to +70° C (-4° F to 158° F) .-15° C to +50° C (+5° F to 122° F) .-20° C to +70° C (-4° F to 158° F) .-15° C to +45° C (+5° F to 113° F) .-40° C to +70° C (-40° F to 158° F) Water and dust resistant (encapsulation) IP 54 IP 54 IP 54 Operating and Storage 20% to 80%, non-condensing, IEC 359 25G, IEC 68-2-29 2G, IEC 68-2-6 Operating and Storage 20% to 80%, non-condensing, IEC 359 25G, IEC 68-2-29 2G, IEC 68-2-6 Operating and Storage 20% to 80%, non-condensing, IEC 359 25G, IEC 68-2-29 2G, IEC 68-2-6 Laser Pointer Laser type Power/Charger 2 Bay Battery Charger Other Features Set-up controls Humidity Shock Vibration Physical Characteristics Weight <1.25 lbs. (0.55kg), including battery <1.25 lbs. (0.55kg), including battery <1.5 lbs. (0.7kg), including battery Size (LxWxH) 243mm x 81mm x 103mm (9.6" x 3.2" x 4.1") 243mm x 81mm x 103mm (9.6" x 3.2" x 4.1") 265mm x 80mm x 105mm (10.4" x 3.2" x 4.1") Tripod mounting Standard, 1/4" - 20 Standard, 1/4" - 20 Standard, 1/4" - 20 PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE INFRARED CAMERAS 120524 Flir ThermaCAM BCAM (Includes FIXED 25° Lens) $5,750.00 $5,750.00 120524-SD Flir ThermaCAM BCAM SD (Includes FIXED 25° Lens.) $6,750.00 $6,750.00 120525 Flir ThermaCAM B2 - interchangeable lenses: price includes one lens (Choose from standard $9,950.00 $9,950.00 (9°), wide-angle (19°) or telephoto (34°) lens). Accomodates all three, additional lenses can be purchased for maximum versatility Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 25 IAQ INSTRUMENTS Borescope Kits & Accessories Color Borescope Visual Optics Borescope The Ultimate Inspection Tool Now it’s easy to inspect inaccessible areas! 120905 & 120906 120915 Based on innovative new fiberoptic technology, the flexible cable fits holes as small as 1/2 inch diameter allowing you to look behind walls, down into drains, inside engines, or hundreds of places without costly demolition or disassembly! This borescope is ideal for searching behind walls, ductwork, Save time & money! This instrument will pay for itself over and over again in reduced labor costs. The amount of time you will save troubleshooting and problem-solving will make you more productive and profitable than ever before. into pipes, or any other inaccessible area. The 36” flexible 120905 cable adjusts to almost any position and allows easy one hand operation. This borescope also features a high resolution lens High Performance... real value! It offers the same high-performance and results as tools costing 10 times as much. The high resolution lens provides a clear image of objects as close as 3/4 inch and over one foot away while providing a wide 40 degree field of view. A powerful lamp illuminates dark crevices on-demand with the push of a button conveniently located on the handle. The ergonomically designed handle is comfortable to hold and allows one-handed focusing and light activation. and a solid state LED lamp for bright illumination. Rugged and water resistant, it is made of high impact ABS and flexible cable sheathing that obediently stays in a set position. Adjust the cable into any position and it will stay fixed in place, until you decide to change it. This feature permits onehanded operation - freeing your other hand to work! Cable Borescope 36” Borescope PART # .4” 914mm Field of View Diameter 10.16mm Handle Overall Carrying Case Length Width Length Weight Weight 41.8” 11.2oz 2lb. 4oz. 6” 152.4mm 1.43” 36.2mm Optimal Viewing Distance Min. .08” 40o 2mm Max. Dependent upon ambient lighting conditions 10.16mm 318g Lamp Volts Power Source 2.7v Halogen 2 AA Batteries (not included) Powered by 4 AA batteries (included) Pressure Necessary to Operate Lamp 2.9 avg. p/psi 3.2 max. p/psi PRODUCT DESCRIPTION PV300-ProKit (Includes color borescope, LIST PRICE ems PRICE $295.00 $249.00 $17.95 $17.95 120906 Borescope 45 degree mirror Attachment 120907 PL-1000 Halogen Bulb For Borescopes $9.95 $9.95 120915 Visual Optics Borescope $295.00 $249.00 120913 Flex Eye IS5000 video inspection system $1549.00 $1449.00 Toll Free: 1.800.293.3003 emssales.net Die-cut foam carry case (included) 40 Degree Viewing Angle 120913 1021g 45 degree Mirror Attachment, Magnet, extra halogen bulb & case) 26 Easy to Use handle 3” Minimum Bending Diameter Video Inspection System BORESCOPES, KITS AND ACCESSORIES 120905 LED lamp 10 mm Tip Diameter Flex Eye IS5000 TECHNICAL SPECIFICATIONS Length 36” Flexible Cable The high-tech IS5000 video inspection system is designed to provide mold remediation and facility restoration contractors, consultants, facility engineering and maintenance departments, insurance companies and building inspectors with a reliable and minimally invasive method for finding hidden damage or contamination. Compact, lightweight and easy-to-use, the IS5000 is ideally suited for locating, identifying and documenting problems such as water or moisture damage or mold growth in wall cavities and other spaces that are hard to see or reach. providing environmental products for a safer tomorrow IAQ INSTRUMENTS Particle Counters Ergonomically designed and lightweight, the Lighthouse HANDHELD 3016 is the newest and most advanced Handheld particle counter on the market for Indoor Air quality monitoring.Offering 6 channels of simultaneous particle counting, the HANDHELD 3016 displays both cumulative and differential particle count data as well as Temperature/Relative Humidity data on its easy-to-read 3.8” (9.25 cm) backlit touch screen. A removable Lithium Ion battery maximizes the HANDHELD 3016’s uptime. Data is easily downloaded using the Lighthouse Data Transfer Software LMS XChange.The HANDHELD 3016 will monitor particulate levels accurately and reliably, even in those “hard-to-reach” areas where two handed operation is unsafe. Designed and built by Lighthouse Worldwide Solutions, a name you can trust. Screen Detail Full Product Line Available PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $129.00 $99.00 Particle CounterS 120247 Lighthouse Pelican Carrying Case 120500 Lighthouse 3016 Particle Counter (detects micron sizes .3u .5u .7u $3,595.00 $3,395.00 120501 Lighthouse 3016 IAQ Particle Counter (detects micron sizes .3u .5u, 1.0u, $3,595.00 $3,395.00 1.0u 2.0u & 5.0u) 2.5u, 5.0u & 10.00u) Features: • • • • • • • • • • Removable / Rechargeable Lithium Ion Battery View 6 Particle Sizes Simultaneously Meets JIS Standards 3.8” (9.25 cm) Backlit Touch Screen Interface Large Memory: Stores 3000 Sample Records Buffered Data Immediately Viewable Internal Audible Alarm Ergonomically Designed Handle Lightweight: only 2.2.lbs Temperature/Relative Humidity Probe Included • Data Easily Downloaded to Computer • Designed for Reliability Environmental Monitoring Systems Applications: • • • • • • • • • • • • • Baseline Studies Mold Remediation Assists in Mold Location Verify Containment Areas during Mold Remediation Detect and Verify Particle Sources Filter Testing Validation of HVAC Duct Cleanliness Pre-test Prior to CIH certification Indoor Air Quality Investigations Laminar Air Flow and Biohazard Benches Hospital Surgical Rooms Paint Spray Booths Monitor Manufacturing Areas 120247 Toll Free: 1.800.293.3003 emssales.net 27 IAQ INSTRUMENTS Particle Counters Fluke 983 particle counter Specifications Channels 0.3, 0.5, 1.0, 2.0, 5.0, 10.0 µm Flow Rate 0.1 cfm (2.83 L/min) controlled by internal pump Count Modes Concentration, totalize, audio Counting Efficiency 50% @0.3 µm; 100% for particles > 0.45 µm (per JIS B9921:1997) Zero Count 1 count/5 minute (JIS B9921:1997) Coincidence Loss 5% at 2,000,000 particles per ft3 Relative Humidity ± 7%, 20% to 90% non-condensing Temperature ± 3 C, 10 C to 40 C (50 F to 104 F) Data Storage 5000 sample records (rotating buffer) of date, time, counts, relative humidity, temperature, sample volumes, alarms, label Alarms Counts, low battery, sensor fail Delay Time 0 to 24 hours Sample Inlet Isokinetic probe Interface RS-232 and RS-485 via RJ-45 120240 Quickly and accurately measure particle concentrations in the air. Particle data is important in mold remediation, particle source identification, and filter testing. The Fluke 983 is invaluable for plant maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and accurate in any position, the Fluke 983 has a six-channel particle size display and extensive data-logging capacity, making it the perfect tool for monitoring problem areas. Environmental Specifications Operating: 10 C to 40 C (50 F to 104 F), 20% to 90% relative humidity, noncondensing Storage: -10 C to 50 C (14 F to 122 F), up to 90% relative humidity, noncondensing Mechanical & General Specifications Size 11.43 cm x 20.96 cm x 5.72 cm (4.5 in x 8.25 in x 2.25 in) Dimensions (W x L x D) Weight 1.0 kg (2.2 lbs) Power AC adapter, 12 V DC at 2.5A, 90 to 250 V AC, 50 to 60 Hz Rechargeable Battery NiMH, 4.8 V at 4.5 Ah; replaceable Battery Life 8 hours Recharge Time 2 hours Calibration PSL particles in air (NIST traceable) Full Line PART # PRODUCT DESCRIPTION Distributor LIST PRICE ems PRICE $4,495.00 $4,475.00 Particle Counter 120240 28 Fluke 983 Particle Counter Toll Free: 1.800.293.3003 emssales.net The Fluke 983 has: • Highly visible backlit LCD with six particle size (0.3, 0.5, 1.0, 2.0, 5.0, 10.0 µm) display • 5000 sample record capacity • Selectable sample time, count data, programmable delay • Concentration, totalize, and audio counting modes • Built-in RH and Temp • Rechargeable NiMH battery providing up to 8 hours continuous operation • Low battery alarm Included Accessories Certificate of Calibration (NIST), Windows compatible software download utility, DB9 to RS-232 adapter and cable, isokinetic probe, high-purity tubing, 1/8 in. hose barb adapter, power supply, zero count filter, operation manual, and molded plastic case. providing environmental products for a safer tomorrow IAQ INSTRUMENTS Gas Monitors/Gas Detection Tubes & Kits Fluke 975 AirMeter Use the fluke 975 airmeter test tool to: TM The Fluke 975 AirMeter test tool raises indoor air monitoring to the next level by combining five powerful tools in one, rugged and easyto-use handheld device. Use the Fluke 975 to optimize HVAC ventilation settings for ASHRAE 62 recommendations, actively monitor conditions that promote a productive environment, and quickly and accurately address occupant comfort complaints the first time. The Fluke 975 measures: • Verify the operation of building HVAC control systems. • Determine whether adequate ventilation exists. • Monitor air flow and velocity. • Test for dangerous carbon monoxide leaks. • Perform duct traversals. • Optimize HVAC systems to manage energy costs. Features: • Simultaneously measures, logs, and displays temperature, humidity, CO2, and CO on a bright, backlit LCD display • One-touch air flow and velocity with available probe* (product # 120278-V) • Wet bulb and dew point temperature • % of outside air calculation • Temperature • CO2 and CO field calibration feature • Velocity (optional)* • Self-test function at startup • Humidity • Auto-backlight • CO2 • Automatically compensates for barometric pressure changes • CO 120278 • Respond to comfort-related calls from occupants. Velocity Probe: Included with Fluke 975V, optional with Fluke 975 Fluke 975V AirMeter™ with Velocity Probe available at an additional cost. • Min/Max/Average on all measured and calculated readings • Multi-language user inferface • Metric or standard units • Audible and visual threshold alarms • Extensive discrete or continuous data logging capacity, downloadable to PC via USB interface TSI IAQ CALC ® • Keypad lock for security • Included FlukeView Forms® software • Temperature and relative humidity measurements help determine thermal comfort levels • Calculates % outside air from either CO2 or temperature readings • Directly calculates dew point, wet bulb temperature, absolute humidity & humidity ratio - no psychrometric chart needed • Electrochemical sensor measures CO at outdoor air intakes, HVAC systems and parking garages (Model 8762 only) • Two-line display shows multiple parameters simultaneously • Data logging allows user to log 14,000 samples with a time and date stamp • Simultaneously records all parameters available • Continuous data logging enables full-cycle monitoring and trend analysis • TSI LOGDAT™ downloading software permits easy transfer of data to a computer • LOGDAT Companion Excel® Macro automatically graphs your data • Data can be reviewed on-screen, printed or downloaded to a computer for easy report generation • Statistics function displays average, maximum and minimum values, and the number of recorded samples PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE GAS MONITORS 120220 Environmental Monitoring Systems 120220 TSI 8760 IAQ-Calc IAQ Meter (Temp/RH/DP/CO2) $1,795.00 $1,795.00 120221 TSI 8762 IAQ-Calc IAQ Meter (Temp/RH/DP/CO2/CO) $1,995.00 $1,975.00 120278 Fluke 975 AirMeter (W/out Velocity Probe) $2,195.00 $2,075.00 120278-V Fluke 975 AirMeter (With Velocity Probe) $2,495.00 $2,375.00 120278-CAL Calibration Kit for Fluke 975 AirMeter $550.00 $550.00 Toll Free: 1.800.293.3003 emssales.net 29 IAQ INSTRUMENTS Gas Monitors/Gas Detection Tubes & Kits FlukeCO-220 Carbon Monoxide Meter Quickly and accurately measure CO levels with easy-to-use compact meter The Fluke CO 220 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels with a single compact instrument. Featuring the newest generation of electrochemical sensors, the CO 220 responds very quickly to ambient changes in carbon monoxide concentration without the use of a pump. The CO 220 is the perfect instrument for technicians and other professionals who need to measure CO levels within spaces such as industrial environments, commercial buildings, or residential dwellings where accumulation of combustion gases is possible. CO 220 product highlights include: • Rugged case and electronics. • Large LCD displays CO levels from 0 to 1000 ppm. • Bright back light allows easy screen viewing under dim lighting conditions. • Beeper triggers with increasing frequency as CO levels increase. • MAX Hold function stores and displays the maximum CO level. • Automatic sensor zeroing and self test sequence upon start up. • CO level beeper can be silenced if desired. • Automatic power off after 20 minutes extends battery life. • Easy to replace battery. • Replaceable sensor extends tool life. • C50 soft carrying case, battery and instruction sheet. Measurement specifications Range: 0 to 1000 ppm Resolution: 1 ppm Accuracy: 3% • Stabilized electrochemical CO specific sensor with 2 second warm up. • Typical three year life; one year calibration cycle. • Battery life typical 500 hours with alkaline battery. 120276 TSI Carbon Dioxide (CO2) Meter TSI’s IAQ-Calc™ Meters are exceptional IAQ instruments for investigating and monitoring building air quality. The Model 8732 is a cost-effective carbon dioxide monitor. ® IAQ CALC 8732 Standard Features: • Carbon dioxide monitor with low-drift NDIR CO2 sensor to ensure stable, accurate readings • Sampling function records multiple point measurements • Optional portable printer provides hard copy documentation PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE GAS MONITORS 120223 30 Toll Free: 1.800.293.3003 emssales.net 120223 TSI IAQ-CALC Carbon Dioxide Monitor $495.00 $475.00 120276 Fluke CO-220 Carbon Monoxide Meter $299.95 $299.95 providing environmental products for a safer tomorrow IAQ INSTRUMENTS Gas Monitors/Gas Detection Tubes & Kits QRae II QRae Plus Compact Multigas Detector for H2S, CO, O2 Combustibles Compact Multi-gas Detector The QRAE Plus is a full-featured, compact, one-to-four sensor confined space gas detector. It’s features include easy-to-change, externally accessed battery packs (available in both alkaline and rechargeable versions) and water-resistant case design. The rechargeable, Lithium-ion battery pack provides up to 20 hours of continuous operation. The QRAE Plus includes 16,000 datalogging points of storage capacity for download to PC compatible with Windows 98, NT, 2000 and XP. for H2S, CO, O2 Combustibles 120258 The QRAE II is a full-featured, compact, one- to foursensor gas detector for detection of combusibles, oxygen, hydrogen sulfide, and carbon monoxide. Key features include easy-to-change, externally accessed battery packs (available in rechargeable and alkaline versions), a water-resistant case and a new state-of-the-art O2 sensor technology with extended life. 120259 Key Features include: • One-to-four plug-in “smart” sensors: Combustible, Oxygen, Hydrogen Sulfide, Carbon Monoxide • Optional substance-specific toxic sensors: Sulfur Dioxide (SO2), Nitric Oxide (NO), Nitrogen Dioxide (NO2), Chlorine (Cl2), Hydrogen Cyanide (HCN), Ammonia (NH3), Phosphine (PH3) • Rechargeable Lithium-ion battery pack provides up to 20 hours (more than 2 work shifts) of continuous operation Key Features include: • Patented SPE O2TM Oxygen sensor • Best EMI/RFI immunity technology for products in its class, eliminating radio interference • Easy access to sensors, filter and battery compartment without exposing electronic components to potential damage • Big graphic display for easy overview of gas type and concentration • Alkaline adapter and Lithium-ion battery pack • Rugged housing withstands harsh environments • Rugged housing withstands use in harsh environments with a water and dust resistant case and strong protective rubber boot • • • • • • • Highly resistant to radio frequency and other electromagnetic interference Strong, built-in sample draw pump with optional collapsible sample-probe Also available in diffusion configuration One-button calibration with auto-zero capability Loud audible alarm Bright Visual Alarm Interchangeable Lithium-ion and alkaline battery packs QRae QRAE is a rugged, easy to use, economical, hand-held 4 gas monitor. It has a built-in robust internal pump with optional 20,000 point datalogging capacity. 4 Gas Monitor Features With Confined Space Entry Kit 120257 PART # PRODUCT DESCRIPTION Reliable plug-in smart sensors - Combustible - Oxygen - Hydrogen Sulfide - Carbon Monoxide LIST PRICE ems PRICE GAS MONITORS 120257 QRAE 4 Gas Monitor for Confined Space Entry Kit (kit includes: monitor, case, sampling wand, tool kit, four-gas mix in a 34L cylinder, calibration regulator and tubing) $875.00 $875.00 120258 QRAE II, LEL/O2/H2S/CO with alkaline batteries (lithium ion rechargeable batteries also available) $545.00 $545.00 120259 QRAE PLUS, LEL/O2/H2S/CO, Li-ion battery with charger,software $1,105.00 $1,105.00 Environmental Monitoring Systems Applications Confined Space Entry - waste water treatment plants - marine and off shore oil wells - landfill operations - trenches, silos, railcars - coal mines - cruise ships - sewers and manholes - tunnels - Refineries, petrochemicals plants, offshore drilling and plant shut downs - Power plants - Pulp and paper industry - Steel mills Toll Free: 1.800.293.3003 emssales.net 31 IAQ INSTRUMENTS Gas Monitors/Gas Detection Tubes & Kits Standard Features: • Continuous monitoring of VOCs 0-1000 ppm with 0.01 ppm (10 ppb) resolution with PID sensor • Continuous monitoring CO2 0-20,000 ppm with 10 ppm resolution • Continuous measurement of Temperature and Relative Humidity • Toxic sensor socket accepts CO, H2S. SO2, NO, NO2, Cl2, HCN, NH3 and PH3 sensors • Built in diaphragm pump for sampling • 24 hours continuous operation from built-in Li-Ion battery • 24/7 continuous operation when plugged into wall charger • Interchangeable Li-Ion or alkaline battery pack • Data easily downloaded with ProRAE Suite software • Sensors as specified • Carbon filters (for units with CO) • Calibration adapter • Rechargeable Lithium ion battery pack • 110/240 V AC/DC Wall Adapter • Spare alkaline battery pack • Filter adapter • 10 spare external filters, 5 spare internal filters • Hard transport case with pre-cut foam • Sampling Wand w/ 10’ of self-coiling Teflon tubing • Tool Kit IAQRAE 120255 The IAQRAE is the only indoor Air Quality (IAQ) monitor to combine a Photo-Ionization Detector (PID) with traditional measures of IAQ like Temperature, Humidity, Carbon Dioxide (CO2) and a user-selected toxic gas sensor in one 1-5 sensor package. The PID gives the IAQRAE the ability to measure 0-1000 ppm of VOCs (Volatile Organic Compounds) with 0.01 ppm (10 ppb) resolution. ToxiRAE The ToxiRAE Plus PID is the world’s first and only pocket-sized datalogging Photoionization Detector (PID). Its small size brings the “broad-band” capabilities of the PID/VOC detector to a personal level for 10 hours of continuous and instantaneous monitoring of volatile organic compounds (VOCs). The ToxiRAE PID is a very convenient tool that alarms to warn of excessive exposure. Applications include VOC threshold detection in HazMat, environmental cleanup, or industrial applications. Key Features: • Small and light enough to wear in a pocket for a full working shift of protection • The ToxiRAE Plus PID lamp and sensor comes apart in seconds for easy maintenance without tools! • Measure more chemicals than with any other PID. With over 38 standard Correction Factors available and the largest printed list of Correction Factors in the world (300+), • The standard rugged rubber boot helps assure that the ToxiRAE Plus survives the bumps and knocks of tough field use. • Large keys are operable even with 3 layers of gloves • Store up to 67 hours of data at one minute intervals for download to PC with the optional datalogging. 120260 • Varying audio alarm signals for different alarm conditions including STEL, TWA, and Peak MiniRAE 2000 voc monitor 120263 The rugged MiniRAE 2000 is the most popular hand-held photoionization detector (PID) for VOC measurement ranging from 0-10,000 parts-per-million. The MiniRAE 2000 is used to monitor air pollution, leaking underground storage tanks, confined space entry, emergency response to hazardous spills, indoor air quality and as a survey instrument. *Basic unit includes data logging. PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $1450.00 $1450.00 GAS MONITORS 120260 TOXIRAE PLUS PID with Ni-Cd battery, ppbRAE plus voc monitor 120261 The ppbRAE Plus extends the range from 1 part-per-billion to now 2,000 parts-per-million. The ppbRAE Plus is the most sensitive handheld VOC monitor with true parts-per-billion (ppb) detection of low level, low vapor pressure, highly toxic VOCs, pesticide residues, and low level permeation breakthrough detection. The ppbRAE Plus also comes with an option to be wirelessly enabled and compatible with the AreaRAE family, providing real-time data transmissions to a host controller located up to 2 miles away. 120V universal charger 120261 ppbRAE Plus $6245.00 $6245.00 120263 MiniRAE 2000 $3545.00 $3545.00 120255 IAQRAE Air Quality Monitor $3,745.00 $3,745.00 32 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ INSTRUMENTS Gas Monitors/Gas Detection Tubes & Kits Draeger CMS Measurement Made Easy CMS: Chip Measurement System The CMS combines substance specific measuring Chips with an electronic based Analyzer for an easy-to-use spot-measurement 120215 system. The 10 capillaries in each Chip are filled with a reagent system based on Draeger’s 60+ years of calorimetric chemistry expertise. The analyzer combines a revolutionary optical system for analyzing the color reaction with a mass flow controller and pump system that provides unbeatable reproducibility. Simplified Operation: The CMS is literally as easy to operate as 1-2-3. Making an analysis is as simple as turning the unit “on” (moving the slide to position 1), then following the plain language instructions on the display to load the Chip and move the slide selector to positions 2 and 3. Operating the CMS couldn’t be easier because this is the exact same procedure for every Chip! Upon completion of the analysis, the CMS Analyzer shows the concentration on the display. Any misinterpretation of the results is eliminated by the unambiguous digital display of the concentration. Choose from 55 different chips. IAQ Kit Includes: Analyzer Set, 4 Chips and Nylon Transport Case (includes the following chips: Carbon Dioxide Call for available chips. 200-3000 ppm, Carbon Monoxide 5.0-150 ppm, Formaldehyde 0.20-5.0 ppm and Ozone 25.0-1000 ppb) MiniWarn Fits your Application 120217 You Design The Miniwarn.... choose From 20 Different Sensors! Tests for 1-4 gases at a time *call for available sensors Easy Operation: The MiniWarn is one tough little instrument, but it’s very easy to operate. The three buttons on the front of the monitor turn it ON, OFF, acknowledges alarms and access routinely needed data like battery levels. Functions such as calibration and alarm set points are adjusted through plain language menu commands. These functions are protected by a pass code to prevent accidental or unauthorized adjustment. In the adjustment modes, the three-buttons act as up, down, and enter buttons to navigate you through the menu. Operation of the MiniWarn is very intuitive. Ultimate Flexibility: You design the MiniWarn, specifically for your application. Choose from over 20 different intelligent sensors for the four measurement channels, and change sensors quickly as your needs change. The three battery pack options: NiCd, NiMH, and PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE Alkaline, are interchangeable allowing for quick change-outs when 24-hour operation is GAS MONITORS needed. 120215 Draeger CMS IAQ Kit $2209.00 $2089.00 120217 Draeger MiniWarn Kit $2789.00 $2635.00 $379.00 $379.00 Bellows Pump DraegerACCURO 600170 Draeger ACCURO Bellows Pump with Tube Breaker Bellows Pump & Tubes Tubes not included. Call for a complete list. More than 500 substances can be detected and measured using the Dräger-Tube system. Typical applications include the monitoring of workplace air, emission measurements, quality control, process control and monitoring of compressed air for breathing apparatus, as well as environmental and hazardous substance detection technology. 600170 Tubes Not Included. MORE THAN 500 SUBSTANCES CAN BE DETECTED! Call for a complete list of available tubes The accuro gas detector pump is a manually operated bellows pump that draws a calibrated 100 milliliter sample through the short-term Dräger-Tubes. Features: • One-Hand Operation • Very Low Maintenance • End-of-Stroke Indicator • Built-in automatic Stroke Counter Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 33 IAQ INSTRUMENTS Gas Monitors/Gas Detection Tubes & Kits Sensidyne PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $349.00 $340.00 SENSIDYNE GAS DETECTION TUBES & KITS 600191 600191 Sensidyne/Kitagawa Detector Tube Pump Kit 126F Carbon Dioxide (100-4000ppm) call for pricing 106SC Carbon Monoxide (1-50ppm) call for pricing 171SB Formaldehyde (1-35ppm) call for pricing 120SD Hydrogen Sulfide (1-60ppm) call for pricing 117SC Nitrogen Dioxide (0.1-10ppm) call for pricing 125SA Propane (0.02-0.05%) call for pricing 103SD Sulfur Dioxide (1-60ppm) call for pricing over 300 Gas & Vapor Tubes to Choose From! Complete Line of Sensidyne, Gastec & Draeger Detector Tubes Available! call for a complete list 800.293.3003 or visit us at www.emssales.net 600180 Gastec Gas Detection Tubes Gastec detector tubes are thin glass tubes with calibration scales printed on them which allow you to directly read concentrations of the substances to be measured. These tubes are a great economical way to quickly screen for indoor contaminants. Accustar Radon Test Kit Double vial test kit. New and Improved! A Lightweight and easy to use 2 to 4 day test kit preferred by many professionals. Includes two (2) charcoal liquid scintillation (LS) vials, instructions, postage-paid return mailer, laboratory analysis and report via US Postal Service or fax. Kits receive priority laboratory processing. 34 Toll Free: 1.800.293.3003 emssales.net PART # PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE GASTEC DETECTION TUBES & KITS 600180 Gastec Detector Tube Pump Kit Gas or Vapor Carbon Dioxide - (XLR) - - - - - - - - - Carbon Dioxide - (XLR) - - - - - - - - - Carbon Monoxide - (XLR) - - - - - - - - Formaldehyde - (XLR) - - - - - - - - - - Acetic Acid - (LR) - - - - - - - - - - - - - - Ozone - (LR) - - - - - - - - - - - - - - - - - Nitrogen Oxide - (LR) - - - - - - - - - - Hydrocarbons - - - - - - - - - - - - - - - - - $335.00 $335.00 Range Tube# 300-5000ppm - - - - - - 2LL 100-4000ppm - - - - - 2LC 5-50ppm - - - - - - - - - 1LL 0.05-1ppm - - - - - - - - 91LL 0.125-25ppm - - - - - - 81L 0.125-3ppm - - - - - - - 18L 0.04-10.5ppm - - - - - - 11L 100-3000ppm - - - - - - 105 LR = Low Range XLR = Extra Low Range Tubes are available for over 300 substances A complete list is available at www.emssales.net PRODUCT DESCRIPTION LIST PRICE ems PRICE $29.95 $24.95 RADON TEST KIT 120902 120902 Accustar Radon Double Vial Test Kit providing environmental products for a safer tomorrow IAQ INSTRUMENTS Moisture Meters PROTIMETER World Leaders in Moisture Measurement and Dampness Diagnosis Protimeter MMS Plus 3 In 1 Moisture Meter & Hygrometer Now Featuring 0-100% Humistick Sensor 120305 The moisture you cannot see matters most when cleaning and restoring a property after water damage from storms, floods or fires. From hidden mold to unseen structural damage, undetected moisture damages health and property and its oversight can create liability. That’s why the right moisture meter makes the difference. The MMS Plus is a complete moisture measurement system in one easy-to-use robust instrument. • Hygrometer mode measures relative humidity, ambient temperature, dew point and grains per pound with a replaceable Humistick™ probe • Pin measure mode determines moisture content of wood and Wood Moisture Equivalent (WME) in other building materials • Pinless measure mode uses radio frequency to detect moisture non-invasively • Diagnose the extent of moisture intrusion for damage assessment and monitor drying out of building structures • Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures Search behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block. • Non-invasive pinless radio frequency finds moisture up to 3/4 in (19 mm) below surface • Search mode not adversely affected by surface moisture Hygrometry checks the dehumidification process and monitors buildings for adequate ventilation affecting indoor air quality. • Measures moisture in concrete floors using ASTM F2170-02 • Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound • Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions MMS kit with Humistick/Software Package includes: • Data download software with cable (BLD5810) • Surface temperature sensor (BLD5804) • 5” (127 mm) insulated deep wall probes (BLD5018) • Calibration check device (BLD5086) • Hygrostick/Humistick ext. lead, 30” long ( 76 cm) (BLD5802) • Instructions and nylon zipper pouch Environmental Monitoring Systems The most widely used moisture meters in the world are probably the Protimeter Mini series. These compact, general purpose moisture meters are used by building professionals and trades across the globe to check the moisture level of wood and masonry products for a vast range of quality control and dampness diagnosis applications. Protimeter has now launched a new version of the famous Mini moisture meter. The new Mini incorporates a range in design refinements and features that make it much simpler to use than the instrument it supersedes. The stylish instrument case fits snugly in the hand, so it can be used effortlessly for long periods and the new display is very bright for visual clarity. Protimeter has used their knowledge and expertise to produce an instrument that combines sympatric design with optimized functionality. • Pin moisture probe and hygrostick lead (BLD5060) • One year parts and labor warranty The Definitive Moisture Meter Also, if the instrument is inadvertently left on, it switches off automatically after five minutes to save the battery life. • Humistick (POL7750) Range 0-100%, fast responding) • Wood species calibration table Protimeter Mini-Moisture Meter 120307 Specifications: • Calibration chart for over 150 wood species • Power 2 x AA • Pin Measurement Range 6-100 • Read out - 60 bright LED’s • Pouch • Calibration Check Toll Free: 1.800.293.3003 emssales.net 35 IAQ INSTRUMENTS Moisture Meters PROTIMETER A New Generation of Moisture Meters Protimeter has been manufacturing moisture meters for a wide range of industries for over 40 years. Protimeter has built its reputation by providing the latest technology together with high quality manufacturing and excellent service. Protimeter 120302 Surveymaster • Identify the extent of the dampness • Diagnose the cause of the problem • Monitor change in the moisture level • Assess, in relative terms, if the material is in a dry, borderline or damp condition • Map the extent of the problem numerically • Monitor change in moisture condition numerically • Features Beeper. May be switched on/off by the user. • Auto switch off. May be switched off, or set between 1-3 minutes, by the user. SM BLD5350 The Protimeter Surveymaster SM moisture meter combines the conventional two-pin inspection method, with a non-invasive radio frequency technique. This enables the user to assess the moisture condition not only on the surface, but also at depth quickly and non-destructively. The Search Mode uses the same colour coded LED scale as the Measure mode, identifying degrees of dampness below the surface. There is also a user adjustable Audible Alarm that sounds to indicate the varying levels in moisture. In this mode, the instrument employs radio frequency emissions (RFE) to measure moisture through most wall and floor coverings, including ceramic tiles. The two-pin Measure Mode identifies by means of green, yellow and red LEDs whether a surface is in a safe i.e. air-dry, borderline or damp condition. The dampness measure is quantified on an LCD display to one decimal place in terms of % wood-moisture-equivalent (%WME). PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE MOISTURE METERS 36 120302 Protimeter SurveyMaster Penetrating/Non-Penetrating Moisture Meter $539.00 $459.00 120305 Protimeter Mini-Moisture Meter (LED Display) $220.00 $199.00 120307 Protimeter MMS Plus Temp/ Relative Humidity/ Moisture w/ Grains/lb calculation & data download kit $1,199.00 $1,099.00 120308 Protimeter MMS Data Cable and Software $99.95 $99.95 120315 Replacement Hygrosticks (singles) $60.00 $60.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ INSTRUMENTS Moisture Meters Introducing the New Delmhorst TotalCheck The Delmhorst’s TotalCheck three-in-one meter offers scan and pin mois- Pin mode: ture modes and a thermo-hygrometer that measures ambient Temperature • 5%-60% wood scale and RH and calculates Dew point and GPP. The RH sensor of TotalCheck is • Corrects for 69 individual wood over the range of 5%-60% MC removable and conforms to the ASTM F-2170 standard. • Corrects for temperature over the range of 0-255°F/-18-124°C • 0.1% - 6% sheetrock scale • 0-100 numerical reference scale for non-wood building materials 120324 Basic Package: Includes meter (1) RHT-S1 humidity sensor carrying case 26-ES electrode (10) #496 pins. Scan mode: • 0-200 numerical reference scale Thermo-hygrometer with RH sensor - conforms to ASTM F-2170 • Measures Temperature over the range of -4-158°F/-20-70°C • Measures RH over the range of 0-100% • Calculates Dew Point • Calculates Specific Humidity (GPP) General Features: • Connector for external Electrodes • On-screen reading recall of up to 1400 stored readings Delmhorst MoistureCheck The MoistureCheck has integrated 120328 • Date and time stamp for each stored reading • Job groupings • Infrared linking to PC or laptop • Application software - generate reports and manage data • 9V battery pin and pin-less technologies to • 1-year warranty develop two state-of-the-art meters • Carrying Case designed for restoration contractors, Full Line Delmhorst Distributor home, and building inspectors and IAQ specialists. PART # PC/KIT Application Software Program: Enables you to download stored readings from the meter to a PC via infrared linking. This software will enable you to: • Customize job title • View data in Fahrenheit or Celsius • Append notes to each job ems PRICE 120328 Delmhorst MoistureCheck Complete Package (M:Check/CP) Includes meter, 26-ES electrode, 21-E e, extra contact pins for the meter, PC/KIT software application program, and carrying case. $725.00 $639.00 120329 Delhmhorst MoistureCheck (Instrument Only) $525.00 $449.00 120324 Delmhorst TotalCheck (Basic Package: Includes meter, (1) RHT-S1 humidity sensor, carrying case, 26-ES electrode, and (10) #496 pins.) $825.00 $779.00 • Customize printing options • Save and print individual or group job readings LIST PRICE Moisture METERS • Export job data to Excel • View readings and stats in the application program PRODUCT DESCRIPTION • Generate graphical histogram All these features are provided in a easy to use, GUI interface, and are compatible on Windows 95/98/ME/2000/XP, The PC/KIT is included in the M:Check/CP (complete package), or may be ordered separately. Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 37 IAQ INSTRUMENTS Moisture Meters Delmhorst Accuscan Pinless Moisture Meter w/ Case • Quickly scan the area upon arrival to determine moisture levels in damaged and non-damaged areas. • Reduce drying time by checking moisture every step of the way. • Record readings during the drying cycle to monitor progress of drying equipment. • Verify the structure is dry before removing drying equipment. 120325 Features: • Easy to read analog readout • Measures %MC in wood over the range of 6%-40% • 0-100 reference scale for non-wood building materials • 3/4” penetration • Durable electrode pads – more rugged than competitors’ sensor pads • Built-in battery and calibration checks • 1 year warranty • Carrying Case included Delmhorst BD-2100 Moisture Meter w/ Case • Digital readout • Three scales: • Wood Scale - 6% to 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors • Reference Scale reads from of 0 to 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation • Gypsum Scale - 0.2%-50% moisture range. Use on sheetrock. • Averages up to 100 accumulated readings • Set-point alerts you to when a pre-selected MC is reached • Connector to attach #21-E or #26-ES electrode for deep penetration • One year warranty • Truly one of the most versatile moisture meters available today, the BD-2100 is perfect for the professional contractor. 120327 Additional special order attachement probes available. Call for details. 38 PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE MOISTURE METERS 120325 Delmhorst Accuscan Pinless Moisture Meter With Case $295.00 $259.00 120327 Delmhorst BD-2100 Moisture Meter With Case $310.00 $269.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ INSTRUMENTS Moisture Meters TRAMEX SURVEY ENCOUNTER 120320 THE WORLD’S MOST ADVANCED METER FOR MEASURING MOISTURE IN WOOD, DRY-WALL, PLASTER, BRICK, ROOFING, SIDING AND OTHER CONSTRUCTION MATERIALS The Survey Encounter gives you: • Non-destructive readings • Stores up to 625 readings in 25 files • Accurate moisture readings from 5 to 30% in wood • Relative readings in walls, roofing and many other construction materials. • Automatic correction for density and temperature • Library of 32 wood species plus 3 wall and 3 roofing types • Dot Matrix LCD display • Readings can be recalled and displayed on LCD The Survey Encounter comes complete with customized software and PC interface so you can: • Download recorded readings to your PC. • Transfer stored data to your word-processing or spreadsheet program for analysis or incorporation in your report writing. • Edit any of the 32 wood species in the instrument library from 300 species in the software. Concrete Encounter CME4 For measuring moisture content…instantly…in concrete floors and floor screeds without the need to drill or damage the surface. • Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. • Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering. • The Concrete Encounter will give you an instant reading of moisture content up to 6% concrete; up to 0 - 10 comparitive on gypsum screed enabling you to make an informed decision on when to install the floor covering. • To use, simply switch on and hold the instrument firmly against the surface. As many non-destructive tests as you need can be carried out in seconds without the need to drill or damage the concrete. Specifications Size: 6in X 3in X 1.5in Weight: 10.5 oz Power: 9 volt PP3 battery Display: Analogue Measuring Range: To over 6% moisture content for concrete 0 to 10 comparative for Gypsum floor screed 0 to 100 reference scale PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE MOISTURE METERS 120320 Tramex Survey Encounter Moisture Meter $685.00 $685.00 120323 Tramex Concrete Encounter CME4 $459.00 $459.00 120323 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 39 IAQ INSTRUMENTS Temperature / Relative Humidity Meters TelAire Protimeter Hygromaster RH, Temperature and Dew Point Measurement CO2, Temperature, RH & Datalogger Versatile hygrometer that measures humidity, air temperature and dewpoint The Telaire 7001D hand held monitor features a patented absorption infrared technology. Accurately measures CO2 and temperature whiles calculating real-time ventilation rates. The Telaire 7001D also offers data logging and RH data gathering capabilities. Product kits include a power adapter, however, the unit may be operated up to 80 hours on 4 AA batteries (not included). Functions and Features Measurements that can be displayed on the Hygromaster are: Air temperature Dew point temperature WARRANTY: 18 MONTHS PARTS & LABOR 120310 The Protimeter HygroMaster is an easy to use hygrometer with built in data logging capability. The HygroMaster is a hand-held instrument for taking spot measurements and for logging humidity and temperature values. Quick measurements of relative humidity, dew point, mixing ratio (grains per pound/parts per million by weight) and ambient temperature are shown on a split display at the touch of a button. Mixing ratio/absolute humidity/grains per pound Surface temperature Surface proximity to dew point Specifications: Functions and Features: Large, easy to read display. Temperature displayed in oF or oC. CO2 displayed in ppm. Easily adjusted for altitude changes Flip out stand for desktop monitoring Plug In AC power adaptor Operates for up to 80 hours on 4 AA alkaline batteries (not included). Calibration Kit Available Applications Identify areas with low or substandard ventilation Performance CO2 Channel Data Logging Functions Measurement Range: The ability to record readings instantly at the push of a button or leave the instrument in a place over a period of time makes the Hygromaster ideal for many applications including: 0 to 10,000 ppm display Display Resolution: +-1 ppm Accuracy: +-50 ppm Concrete floor moisture measurement Indoor air quality Performance Temperature Channel Environmental health Temperature Range: HVAC o o o o Identify hidden energy savings in overventilated spaces Display 32 F to 122 F (0 C to 50 C) Determine if ventilation is a factor in air quality complaints 0.1 F (0.1 C) Flood restoration Display Resolution: o Locate the presence of combustion fumes Use as a reference to calibrate wall mounted CO2 sensors o Relative Humidity: The Hygromaster can be set to record measurements over time. The data logger can be set and activated from instrument buttons or from a PC. Measurements can be saved and displayed in a tabular or graphical form. The user selects four data logging parameters listed below: 0-95% Logging interval: 1 minute to 24 hours Accuracy: +-2oF (+-1oC) Display Options: o o F or C TelAire 7001D - Includes CO2/Temperature Monitor, RH/Temp Datalogger Interface Cable & Graphing Software. This unit allows for measuring, recording and graphing CO2, Temp and RH. This TelAire monitor features a large ppm display and 0-4 V output, with calibration/flow through port. Package includes 6V power adapter. Battery (4 AA) powered sensor. Specifications Weight: 4oz Display: LCD Standard Supply: Hand-held Hygromaster, Hygrostick humidity sensor, velcro pouch with belt loop and instructions. Hygrostick Data (Nominal): 30% to 40% RH (+-3% RH) 41% to 90% RH (+-2% RH) 32% to 122 F (0 C to 50 C) +-0.6 F (+-0.3 C) Dimensions : 0 0.3 in x 2 in (8mm x 50mm) o o o o Humistick Data (Nominal) 0% to 10%RH, +-3% RH at 68oF to 86oF (20oC to 30oC) 10% to 90% RH, +-3% RH at 68oF to 86oF (20oC to 30oC) 90% to 100% RH, +-3% RH at 68oF to 86oF (20oC to 30oC) 32oF to 122oF (0oC to 50oC) +-6oF (+-0.3oC) Dimesions: 0 0.6 in x 2.5 in (16 mm x 65 mm) Warranty: 1 year parts & labor Delayed start logging: 1 minute to 24 hours Number of logs: maximum of 398 records 120301 Job number: range from 1 to 15 (BATTERIES NOT INCLUDED) PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $360.00 $319.00 $550.00 $550.00 TEMPERATURE / RELATIVE HUMIDITY METERS 120301 Protimeter Hygromaster w/ Temperature & Relative Humidity Meter (Digital Display) Humisticks and optional Software Package Available call for details 120310 40 TelAire 7001D CO2, Temperature & RH Monitor Toll Free: 1.800.293.3003 emssales.net o providing environmental products for a safer tomorrow IAQ INSTRUMENTS Temperature/ Relative Humidity Meters Fluke 971 Temperature & Humidity Meter Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. Quickly and conveniently take accurate humidity and temperature readings with the Fluke 971.The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and easy to hold, the Fluke 971 is the perfect tool for monitoring problem areas. With a rugged holster and twist-open protective sensor cover, the Fluke 971 is built to perform and made to last. 120274 Features Backlit dual display of humidity and temperature Measures dew point and wet bulb temperatures 99 record storage capacity Ergonomic design with belt clip and protective holster Quick-response capacitance sensor with twist-open protective cover Compact and lightweight (188 g/6.6 oz) Temperature range from -20 °C to 60 °C (-4°F to 140 °F) Relative humidity from 5 % to 95 % Min/Max/Avg Data hold Low battery indicator Specifications Temperature range: -20°C to 60°C (-4°F to 140°F) Temperature accuracy: 0°C to 45°C (±0.5°C) -20°C to 0°C & 45°C to 60°C (±1.0°C) 32°F to 113°F (±1.0°F) -4°F to 32°F & 113°F to 140°F (±2.0°F) Resolution: 0.1°C / 0.1°F Response Time (Temperature): 500 ms Temperature Sensor Type: NTC Relative Humidity Range: 5% to 95% RH Relative Humidity Accuracy: 10% to 90%RH @ 23 °C (73.4°F) (±2.5%RH) (<10%, > 90%RH @23°C (73.4°F) (±5.0%RH) Humidity Sensor: Electronic capacitance polymer film sensor. Data storage capacity: 99 points Response Time (Humidity): For 90% of total range - 60 sec. with 1m/s air movement Environmental Specifications Operating temperature: Temperature: -20°C to 60°C Humidity: 0°C to 55°C Storage temperature: -20°C to 60°C at < 80% R.H. (with battery removed) Mechanical & General Specifications Weight: 190 g (6.7 oz) Dimensions: 194mm x 60mm x 34mm Battery type: 4 AAA alkaline batteries Battery life: 200 Hours ems Digital Relative Humidity & Temperature Pen 120334 • Dual LCD display for temperature, humidity and advanced function indication • Measures temperature (oC/oF) and relative humidity simultaneously • Built-in temperature and humidity sensors for convenient operation • Max/Min memory functions for both temperature and relative humidity • Built-in self calibration utility with optional RH calibration bottles • Data hold for freezing the LCD display status • Complete with pocket clip and 3V lithium battery • Optional kit includes 33% and 75% RH calibration standards and hard vinyl carrying case. PART # PRODUCT DESCRIPTION 120333 LIST PRICE ems PRICE TEMPERATURE / RELATIVE HUMIDITY METERS 120333 ems Digital Relative Humidity & Temperature Pen $59.00 $54.95 120334 ems Digital Relative Humidity & Temperature Pen w/ Calibration Kit $99.95 $95.00 120274 Fluke 971 Temperature Humidity Meter $179.00 $179.00 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 41 IAQ INSTRUMENTS Psychrometer and Infrared Laser Thermometers EXTECH • Multiple Dataloggers can be programmed and data downloaded from one single docking station. • Records Relative Humidity and Temperature in storage containers, shipping vans, freezers and more Temperature / Humidity Datalogger • Program the logger, analyze and store data using Windows 95/98/NT/ME/XP compatible software Compact, powerful and easy to use Records up to 16,000 readings • Programmable sampling rate from 1 second to 2 hours • Logs data for days, weeks or months - up to 1 year battery life • View both humidity and temperature on LCD display 120332 EXTECH Simultaneosly display of %RH, Temperature and Dew Point or Wet Bulb or Probe Temperature Digital Psychrometer RH300 Wet bulb measurements without slinging Calculates T1-T2 differential using optional probe and T2 dew point Specifications: Range Max Resolution Basic Acuracy Humidity 10 to 90%RH 0.1%RH +-3%RH Temperature (internal) -4 to 122oF (-20 to 50oC) 0.1o +-1oF or +-0.6oC Switchable oF/oC temperature units with 0.1 resolution Temperature (external) -4 to 158oF (-20 to 70oC) 0.1o +-1oF or +-0.6oC Data Hold freezes current reading on display o Dew Point -90.4 to 122 F (-68.0 to 49.9oC) Wet Bulb -6.9 to 122oF (-21.6 to 49.9oC) Dimensions 7x1.9x1” (178.5x48.4x24.7mm) Weight 3.3oz (95g) Features: o Measures to 600 F without contact Large LCD display with backlighting Built-in laser pointer to improve aim oF/oC switchable Fixed emissivity (0.95) covers 90% of surface applications Narrow field of view Unique sensor cap design twists to closed position for protection during storage Max / Min readings Auto power off to save batteries Optional external temperature probe (TP890) Optional kit RH305 includes RH300, temperature probe, 33% and 75% calibration bottles, and carrying case Audible and visible overrange indicators Automatic Data Hold Pocket size meter Complete with 9V battery Dimensions: 6.7x1.7x1.6” (170x44x40mm) Weight: 6.4 oz Field of View: 6:1 Measurement Accuracy: +-2% of reading 120335 Applications: Measures surface temperature of objects that are difficult to reach or unsafe to contact. Measures hot spots in electrical panels and equipment In-process temperature measurements. EXTECH InfraRed Laser Thermometer 120330 Specifications Now Introducing the Fluke 62 Mini! The Fluke 62 Mini non-contact thermometer is the perfect introduction to Backlit display for use in poorly lit areas infrared (IR) thermometers for the professional. With the best accuracy in Holds temperature readings its class, the Fluke 62 Mini offers quick and reliable surface temperature Range: 30 to 500 ºC (-20º to 932 ºF) readings. This compact and portable tool enables professionals to diagnose Distance to spot ratio: 10:1 at 80% energy heating and ventilation problems and monitor the temperature of electrical Emissivity: Fixed at 0.95 motors and electrical panels without contact. Rugged enough for industrial Measurement Accuracy: 10 ºC to 30 ºC (50 ºF to 86 ºF): ± 1 ºC (2 ºF) environments with its protective rubber “boot”, the 62 Mini also comes with a handy nylon holster, keeping quick temperature checks at your fingertips. Outside 10 ºC to 30 ºC (50 ºF to 86 ºF): ± 1.5 ºC (3 ºF) or ± 1.5 % of reading, whichever is greater 120270 Fluke 62 Mini InfraRed Laser Thermometer 42 PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE PSYCHROMETER / INFRARED LASER THERMOMETERS 120335 Digital Psychrometer RH300 $89.00 $89.00 120330 Mini InfraRed Thermometer w/ Laser Pointer $99.00 $69.00 120270 Fluke Mini InfraRed Laser Thermometer $99.00 $99.00 120332 Extech Temp/Humidity Datalogger $155.00 $149.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow IAQ INSTRUMENTS Anemometers mini Thermo Anemometer • Fold up protective housing extends to 9” for better reach • Large dual display of air velocity and temperature • Data hold to freeze most recent display • Auto shutoff 20 minutes after last key is pressed • Water resistant housing floats and drop tested to 6 feet • Complete with CR2032 lithium battery and lanyard 800216 Windspeed • Measures ft/min, MPH, m/s, km/h, Knots and Beaufort Force • Selectable averaging function of 5, 10 or 13 second intervals • Replaceable non-corrosive plastic wind vane (impeller) Temperature & Windchill • Measures from 0 to 122oF (18 to 50oC) Pocket Hygro-Thermo-Anemometer • Ergonomic pocket size housing with large dual LCD simultaneous display of temperature and air velocity • Data hold to freeze the display value • Records Min/Max readings • Built-in low friction vane wheel improves accuracy of air velocity in ft/min. MPH m/s, km/h and knots • Built in precision thin-film capacitance humidity sensor for fast response • Built in thermistor for ambient temperature measurements • High temperature measurements using type K thermocouple • Defaults to last function when powered off • Auto power off 10 minutes after last key is pressed with disable feature • Low battery and overrange indication • Complete with built-in humidity sensor and vane wheel, wrist strap and 9V battery (optional type K thermocouple probe) PART # PRODUCT DESCRIPTION 800217 LIST PRICE ems PRICE $89.00 $89.00 $149.00 $149.00 ANEMOMETERS 800216 Mini Thermo Anemometer 800217 Pocket Hygro-Thermo- Anemometer w/ Light Meter (Combines: Light Meter, Humidity Meter, Thermometer & Anemometer) Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 43 Better Technology. Better Results. Proud to Manufacture in the USA Olympus IAQ Microscopes..................................46 Microscope Slides and Coverslips.....................47 Microscope Accessories.....................................47 IAQ Analytical Supplies & Accessories.............48 IAQ MICROSCOPES, SLIDES, ACCESSORIES & ANALYTICAL SUPPLIES Olympus IAQ Microscopes Olympus CX21 Brightfield Biological Microscope The CX21 is an economically priced microscope that achieves a high standard of optical and mechanical quality. The CX21’s newly designed stand has a slim body design, allowing the user to operate the coarse and fine focus comfortably while keeping the hands on the desk. Features & Benefits: • Easy to use & dependable • Highly rigid frame and easy-to-use design offer great reliability and long term durability • Conveniently placed controls and a slim base make for comfortable viewing and efficient adjustments • A plano concave mirror or brightfield observation • An opening in the arm of the frame allows viewing the specimen stage in situations that require the frame to be placed backwards, so the mirror can capture light when emanating from in front of the user •Halogen Light Source 400508 Olympus CX31 Brightfield Biological Microscope The Olympus CH biological microscopes, which have gained an outstanding worldwide reputation, now give rise to the new CX31 with USI infinity optics. The Universal Infinity System optics are the same well-known and advanced optical system featured in the highest quality Olympus Microscopes. Evolved from Olympus’ best selling CH series, the new CX models improve all around performance and offer even greater efficiency. • Newly-developed infinity corrected Plan C Achromat objectives offer exceptional flatness producing sharp, clear images right up the edge of the field of view (4x, 10x, 40x, 100x oil) • Anti-fungus treatment helps protect optical parts even in high humidity regions • Inward-facing, quadruple (CX31), or quintuple (CX41) revolving nosepiece improves access and makes for quick, easy slide changes • Fixed Abbe condenser N.A. 1.25, centerable and focusable for Köhler illumination • A 6V/30W halogen bulb provides ample illumination for any observation • Ergonomically designed frame with low positioned coarse and fine focusing controls, analyzer slot for linear polarized light (CX41 only), and convenient handgrips at the front and back for transportation; integrated field stop • Built in left or right hand stage with rackless design (CX31 right hand only), low positioned X,Y controls with ergogrips to facilitate operation PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE MICROSCOPES 400508 Olympus CX21 Biological Microscope $1,099.00 $979.00 400507 Olympus CX31 Brightfield Microscope $1,699.00 $1,549.00 CX21 & CX31 Biological Scopes come with 4x, 10x, 40x, 100x (Brightfield 60x Achromat Objectives Available) 46 Toll Free: 1.800.293.3003 emssales.net 400507 For a COMPLETE LIST OF MICROSCOPE PARTS & ACCESSORIES please refer to PAGES 85-86 of this catalog. providing environmental products for a safer tomorrow IAQ MICROSCOPES, SLIDES, ACCESSORIES & ANALYTICAL SUPPLIES Microscope Slides, Coverslips and Accessories 1 Gross = 144 Microscope Slides, 1 Box = 72 Microscope Slides, 2 Boxes (of 72 ea) = 1 Gross (144 ea) PART # PRODUCT DESCRIPTION LIST ems PRICE PRICE MICROSCOPE SLIDES 400140 1” x 3” Plain Microscope Slides, 1.2mm, 1 gr. (2 Boxes, 144 ea.) Erie Top Brand Slides Pre-Cleaned $16.50 $14.50 400141 1” x 3” Plain Microscope Slides, 1.2mm, 1 gr. (2 Boxes, 144 ea.) Premiere 9100 series $9.50 $8.50 400142 1” x 3” Plain Microscope Slides, 1 gr. (2 Boxes, 144 ea.) Standard Abco Brand, $15.99 $13.99 No Paper Between Slides 400152 100 Capacity Economy Catalog # 400172 400143 1” x 3” Plain Microscope Slides, 1.2mm, 5 gr. (10 Boxes, 720 ea.) Premiere 9100 series $44.95 $39.95 400145 1” x 3” Plain Microscope Slides, 1.2mm, 10 gr. (20 Boxes, 1,440 ea.) Premiere 9100 series $74.95 $69.95 400147 1” x 3” Plain Microscope Slides, 1.2mm, 30 gr. (60 Boxes, 4,320 ea.) Premiere 9100 series $169.00 $165.00 400148 1” x 3” Plain Microscope Slides, 1.2mm, 25 gr. (Grafco Paper Between Slides) (50 Boxes, 3600 ea.) $139.00 $135.00 400149 1” x 3” Frosted Slides, 1gr. (2 Boxes, 144 ea.) Premiere 9100 series $9.95 $8.95 400150 1” x 3” Frosted Slides, 1 gr. Erie Top Brand Slides (2 Boxes, 144 ea.) Pre-Cleaned $17.50 $16.50 400151 1” x 3” Frosted Slides, 5 gr. (10 Boxes, 720 ea.) Premiere 9100 series $42.50 $39.00 400152 1” x 3” Frosted Slides, 1 gr. Standard Abco Brand, No Paper Between Slides, Frosted on both ends $15.50 $13.99 (2 Boxes, 144 ea.) call for quantity pricing 800.293.3003 400153 1” x 3” Frosted Slides, 10 gr. (20 Boxes, 1,440 ea.) Premiere 9100 series $85.00 $79.00 400155 1” x 3” Frosted Slides, 30 gr. (60 Boxes, 4,320 ea.) Premiere 9100 series $229.00 $209.00 COVERSLIPS 400157 18 x 18mm Coverslips, #1.5, 1 oz. (Chase Brand) (Approx. 100 ea.) $5.00 $3.95 400158 18 x 18mm Coverslips, #1.5, 10 oz. (Chase Brand) (Approx. 1,000 ea.) $36.00 $34.00 400159 22 x 22mm Coverslips, #1.5, 1 oz. (Chase Brand) (Approx. 100 ea.) $5.00 $3.95 400160 22 x 22mm Coverslips, #1.5, 10 oz. (Chase Brand) (Approx. 1,000 ea.) $40.00 $36.00 400161 22 x 22mm Coverslips, #1.5, 1 oz. (Esco Brand “Premium”) (Approx. 100 ea.) $5.00 $3.95 400163 22 x 22mm Coverslips, #1.5, 10 oz. (Esco Brand “Premium”) (Approx. 1,000 ea.) $45.00 $39.95 400165 22 x 30mm Coverslips, #1.5, 1 oz. (Esco Brand “Premium”) (Approx. 100 ea.) $5.00 $3.95 400167 22 x 30mm Coverslips, #1.5, 10 oz. (Esco Brand “Premium”) (Approx. 1,000 ea.) $45.00 $39.95 ACCESSORIES 400168 2 Capacity Slide Mailers / ea. (holds 2 slides - cardboard) $0.89 $0.79 400168-P 2-Capacity Mailers / each (Holds 2 Slides - Plastic) $0.89 $0.79 400169 25 Slide Capacity Slide Box $4.75 $3.95 400170 5 Capacity Slide Holders $0.99 $0.69 400171 100 Slide Capacity Slide Box (Deluxe w/ foam bottom & metal front hinge) $7.95 $7.50 400172 100 Slide Capacity Slide Box (Economy) Unlined $5.95 $5.50 400173 Slide Holder, 20 Slide Capacity $6.95 $5.95 400174 Immersion Oil Type A ¼ ounce $2.95 $2.50 400175 Immersion Oil Type A 1 ounce $5.95 $4.95 400176 Olympus Brand Lens Paper 50 sheets/pack $2.00 $2.00 400177 Canned Air $8.95 $7.95 400212 60X Achromat Objective $400.00 $395.00 600149 Lactic Acid 100ml (85%) $19.95 $19.95 600150 Lactic Acid 500ml (85%) $39.95 $39.95 600151 15ml (1/2oz) Drop Dispensing Bottle $1.99 $1.99 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 47 IAQ MICROSCOPES, SLIDES, ACCESSORIES & ANALYTICAL SUPPLIES IAQ Analytical Supplies and Accessories PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $12.95 $12.95 $15.95 $15.95 Analytical Supplies and Accessories 120127 Basic Fuchsin Stain 120129 LPC Blue Stain 700103 Mortar & Pestle Set, 1155mm O.D. $77.00 $74.95 700104 Petri Dish 100MM 500/case $79.00 $75.00 700105 Mortar Only $49.00 $43.95 700107 Pestle Only $35.00 $29.95 700108-S Latex Gloves w/ Powder 100/ea (Small) $12.95 $11.95 700108-M Latex Gloves w/ Powder 100/ea (Medium) $12.95 $11.95 700108-L Latex Gloves w/ Powder 100/ea (Large) $12.95 $11.95 700109-S Latex Gloves w/o Powder 100/ea (Small) $12.95 $11.95 700109-M Latex Gloves w/o Powder 100/ea (Medium) $12.95 $11.95 700109-L Latex Gloves w/o Powder 100/ea (Large) $12.95 $11.95 700110-L Nitrile Gloves, Disposable, w/o powder 100/ea (Large) $12.95 $8.95 700110-XL Nitrile Gloves, Disposable, w/o powder 100/ea (X-Large) $12.95 $8.95 700113 Glassine Paper, 4” x 4” 500/pk $12.50 $12.50 700152 Amber 1 oz. Dropper Bottles $3.25 $2.99 700153 Amber Bottles, 1/4 oz. $1.75 $1.75 700154 Amber Bottles, 1/4 oz. w/ Dispenser $1.50 $1.50 700155 Amber Bottles, 1 oz. $2.25 $1.99 700156 Amber Bottles, 1 oz. w/ Dispenser $1.75 $1.75 700157 Whirl-Pak Bag, Clear 2 oz. 500 ea., 3” x 5”, 60ml capacity $40.95 $38.95 700159 Whirl-Pak Bag, Write-On, 4 oz. 500 ea., 120 ml capacity 3” X 7 1/4” $44.95 $39.95 700161 Whirl-Pak Bag, Write-On, 2 oz. 500 ea., 3” x 5”, 60ml capacity $44.95 $39.95 700167 Zip-Bag 3 x 5 “Danger” 1000 ea. $65.00 $60.00 700168 Zip-Bag 3 x 5 “Danger” 500 ea. $39.00 $35.00 700169 Zip-Bag 3 x 5 Write-On 1000 ea. $33.00 $28.00 700170 Zip-Bag 3 x 5 Write-On 500 ea. $16.00 $15.00 700171 Zip-Bag 3 x 5 Clear 4ml 500 ea. $24.95 $19.95 700172 Zip-Bag 10 x 13 Write-On 1000 ea. $129.00 $119.00 700173 Zip-Bag 10 x 12 Clear 2ml 1000 ea. $99.00 $89.00 700174 Zip-Bag 10 x 12 Clear 2ml 100 ea. $12.95 $9.95 700175 Red Gauge Oil, 4 oz. $11.95 $8.95 700177 Red Gauge Oil, 16 oz. $25.95 $21.95 700179 Red Gauge Oil, 32 oz. $34.95 $29.95 48 Toll Free: 1.800.293.3003 emssales.net 700155 700154 700156 700153 Amber Bottles Whirl-Pak & Zip Bags Catalog # 700159 & 700168 providing environmental products for a safer tomorrow Containment System...............................................50 Manometers.............................................................51 Negative Air Machines and Air Scrubbers���������52-53 Air Sanitizing System..............................................54 IAQ Disinfectants & Coatings.................................55 Hepa Vacuums, Filters & Accessories................56-57 Respirators, Filters & Accessories...................58-59 Protective Apparel & Accessories......................... 60 REMEDIATION & SAFETY PRODUCTS Containment System ZIPWALL Controls Dust, Installs in Minutes! Ideal for demolition and remediation projects The patented ZipWall® spring loaded barrier system consists of telescoping twist lock ZipWall® poles available in both twelve and twenty foot lengths. The system locks the plastic sheeting material firmly against the ceiling, creating a “virtually airtight” 110604 barrier. Once in place, just lift and tuck the screening material under the pole to create a tight barrier from top to bottom. NEW! ZipWall® 4 Pack Plus Package includes four ZipWall® SLP™ 12’ spring-loaded poles, two Foam Rail™ cross-bars, two ZipWall® Zippers, four Grip Disk™ slide stoppers, and a ZipWall® Carry Bag (plastic sheeting not included). ZipWall’s® SLP™ spring loaded poles are made of anodized aluminum, making them durable and lightweight (less than 1.8 lbs. each). Attach the five-foot Foam Rail™ to tightly seal your barrier to the ceiling. Use the ZipWall® Zipper to create a re-sealable entrance into the work area, and slip in the ZipWall® Grip Disks™ to stabilize poles on slick surfaces. Pack it all away in the ZipWall® Carry Bag. PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $279.00 $269.00 Containment System and Accessories 110604 ZipWall® 4 Pack Plus with 12’ poles Package includes four ZipWall® SLP™ 12’ spring-loaded poles, two Foam Rail™ cross-bars, two ZipWall® Zippers, four Grip Disk™ slide stoppers, and a ZipWall® Carry Bag (plastic sheeting not included). 50 110601 ZipWall Spring Loaded Poles (2 Poles & 2 Grip Disks) $139.00 $129.00 110602 Carry Bag For ZipWall Poles $69.00 $59.00 110603 Adhesive Zippers For ZipWall (2PK) $14.99 $13.99 110605 ZipWall Foam Rails (2PK) $72.95 $69.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow REMEDIATION & SAFETY PRODUCTS Manometers & Vaneometer 4 Cat.# 800201 Omniguard Features • New case design; operate your Omniguard 4 with the lid closed! A window built into the lid lets you view the display while the case is closed, ensuring a watertight unit and less dirt. Less dirt, means fewer printer problems • New logs let you name and save multiple jobs. Print the current job or any previous job at anytime • 40+ days of logging capacity! • New paper feed path allows printing from any position • Built-in USB and Serial ports. Supports off-site remote monitoring using the optional external modem • Same great color, bold yellow! • 20% larger LCD with white LED backlit enhances visibility, near or far • New side clip lets you hang Omniguard • Rotating screen • Multiple screens; enlarged pressure reading or the standard monitoring screen The Omniguard 4 is a differential pressure recorder in a completely self-contained package, designed from the beginning to be extremely flexible yet easy to use. The included accessories, owner’s manual, hose, a spare roll of paper and AC cord, store easily in the lid. There’s no AC adapter to keep track of. It’s easy to find a convenient spot to place the unit since the Omniguard 4 is not position sensitive and can be hung by a nail. Accurate measurements continue even if the unit is dropped or moved. The backlit graphics display provides the easiest setup possible. Pressure is indicated with large easy to read characters and alarm setpoints are always displayed. Screen icons show the monitoring, printer and audible alarm status with a glance. Detailed information for job setup, feature settings and operating instructions are available on-screen at any time by pressing the Help key. Troubleshooting topics are also covered. Pressure readings are time stamped and logged into memory once containment has been established. Audible and visual alarms activate whenever the pressure reaches the alarm setpoints. The Omniguard 4 ensures the site inspector that proper containment was maintained. Logs and summary reports can be printed at any time for easy inspection of the monitoring data. Durable and reliable, the Omniguard 4 is clearly the contractors choice for containment monitoring. Features & Applications: TESTO 506-3 Applications include; pressure drops across fans or filters, flow pressure measurements and positive/ negative pressure measurements in compressed air control systems. Design elements include a very compact size, one-button operation, automatic power off, magnetic back for hands-free operation and flexible hose included. Features: • • • • • One button easy operation Not position sensitive Compact size fits in pocket or tool box Auto-off function Displays H2O, PSI, or hPa • Battery and hoses included PART # Spec Summary: Applications: Measuring Range: ±4” & ±80” H2O Overload: 120” H2O Resolution: 0.001/0.01 in H2O Accuracy: ±0.01” H2O (<0.4”) ±1.5% of fs (0.4 to 4” H2O) 0.4” + 1% of mv (>4” H2O) Operating Temperature: 32 to 104°F Storage Temperature: -4 to 158°F Battery: 2 x CR2032 Battery Life: Approx. 150 hours • • • • Mini Digital Manometer Displays hPa/mbar, mmH2O, mmHg, inH2O, or PSI Adjusts fans and blowers Setting pressure switches Filter monitoring Precise draft monitoring PRODUCT DESCRIPTION LIST PRICE ems PRICE $1,350.00 $1,199.00 $26.50 $26.50 MANOMETERS AND VANEOMETER 800201 Omniguard 4 Professional Pressure Recorder 800205 Omniguard 4 Thermal Paper 5/rls (can be used w/ Omniguard III or 4) 700102 700101 800211 Testo 506-3 $179.00 $179.00 700101 Vaneometer $29.00 $26.95 700102 Manometer Model 25 Mark II $35.00 $33.50 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 800211 51 REMEDIATION & SAFETY PRODUCTS Negative Air Machine and Portable Air Scrubber BULLDOG 2K ™ NEGATIVE AIR MACHINE Features CABINET CONSTRUCTION: Rotational Molded Polyethylene Cabinet. Meets UL,OSHA, CSA electrical safety and UL94 flammability standards. AIR FLOW RATINGS: 2 SPEEDS :(Speed 1 = 1,000cfm+) (Speed 2 = 2,000cfm+) The Bulldog 2K has certified airflow of over 2,000 cfm. FILTERS: 1” Ring Panel Pre-Filter (Included with unit) 2” Pleated Particulate Pre-Filter (optional) 2nd Stage Carbon Filter (optional) Metal Frame HEPA Filter (Included with unit) (HEPA Filter: Certified to an efficiency of 99.97% or higher against 0.3 micron size particles.) DUCTING REQUIREMENTS: Accommodates 12” Ducting DIMENSIONS & WEIGHT: 30½”L x 27½”W x 32”H: 121 lbs (including filters): 24 lbs. lighter than other full-size machines. POWER SUPPLY: <12 Amps: Safe for use on 15 Amp circuits. TRANSPORTABILITY: Casters: (2 Fixed & 2 Swivel, With Locking Foot Brakes) 700350 COVERS OVER 20,000 CUBIC FEET OF SPACE! PART # Introducing the Revolutionary Bulldog™ 2K Negative Air Machine. The advanced technology, design and superior quality of the new Bulldog 2K negative air machine clearly makes it one of the best in the industry. This ultra-lightweight negative air unit, with heavy-duty performance, uses HEPA filters that are certified to an efficiency of 99.97% or higher against 0.3 micron size particles. THIS UNIT COMES EQUIPPED WITH EXHAUST COLLAR, CLAMP, CORD, 1” RING PANEL PRE-FILTER AND METAL FRAME HEPA FILTER. PRODUCT DESCRIPTION LIST PRICE ems PRICE $995.00 $995.00 $72.00 $72.00 Negative Air Machine 700350 Bulldog 2K Negative Air Machine Comes with exhaust collar, clamp, cord, 1” Ring Panel Pre-Filter (1ea) & Metal Frame HEPA Filter (1ea) 52 700352 Bulldog 1” Ring Panel Pre-Filter (12 per case) 700353 (Special Order Only) Bulldog 2” Pleated Particulate Pre-Filter (12 per case) $72.00 $72.00 700354 (Special Order Only) Bulldog Optional Second Stage Carbon Filter (6 per case) $240.00 $240.00 700355 (Special Order Only) Bulldog Replacement Metal Frame HEPA Filter (1ea) $170.00 $170.00 700356 Clear Mylar Ducting 12” Diameter, 25’ Length (4 per case) $100.00 $100.00 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow REMEDIATION & SAFETY PRODUCTS Negative Air Machine and Portable Air Scrubber PREDATOR 1200 PAS PORTABLE AIR SCRUBBER COVERS Up TO 10,000 CUBIC FEET OF SPACE! The Predator 1200 PAS delivers heavyweight performance in a lightweight, virtually indestructible rotational molded cabinet. With a lifetime cabinet warranty, the Predator 1200 weighs just 70 lbs. and provides a peak airflow of 1,000 cfm, giving it more powerper-pound than any other lightweight units. The Predator 1200 is ultra quiet with an operational sound level of only 62-67 dBA taken at 5 feet. THIS UNIT COMES EQUIPPED WITH BUILT-IN INTAKE, EXHAUST, CORD, 1” FIRST STAGE PRE-FILTER, 2” SECOND STAGE PRE-FILTER, AND HEPA FILTER. Features CABINET CONSTRUCTION: UL94HB Flame Retardant Resin with an EPA registered microbial growth inhibitor. AIR FLOW RATINGS: 4 SPEEDS : (Speed 1 = 300cfm) (Speed 2 = 600cfm) (Speed 3 = 800cfm) and (Speed 4 = 1,000cfm) FILTERS: 1” First Stage Coarse Particulate Pre-Filter (Included with unit) 2” Second Stage Pleated Particulate Pre-Filter (Included with unit) 3rd Stage Carbon Filter Pack (optional) Cylindrical HEPA Filter (Included with unit) (HEPA Filter: Certified to an efficiency of 99.97% or higher against 0.3 micron size particles.) DUCTING REQUIREMENTS: Accommodates 10” Ducting DIMENSIONS & WEIGHT: 22”L x 24”W x 42”H: 70 lbs (including filters) POWER SUPPLY: 115 volts, 15 amps: Normal operating amps per unit in less than 3.5amps. (Low amperage draw allows you to “Daisy-Chain” up to three units on one 115-volt/15-amp circuit.) 700357 TRANSPORTABILITY: 2 each 8” solid, non-marking rubber wheels in rear and 2 each 360° swivel casters in front. MOTORIZED IMPELLER: 400 watt motorized impeller with thermal overload protection, auto reset, 60Hz, single phase. PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $1,875.00 $1,875.00 $16.60 $16.60 Portable Air Scrubber 700357 Predator 1200 PAS Portable Air Scrubber: Intake, Exhaust and Cord are “built-in”. Comes with 1st Stage Pre-Filter (1ea), 2nd Stage Pre-Filter (1ea) & Cylindrical HEPA Filter (1ea) 700358 Predator 1” First Stage (12 per case) 700359 (Special Order Only) Predator 2” Second Stage Pre-Filter (6 per case) $30.00 $30.00 700360 (Special Order Only) Predator Optional Third Stage Carbon Filter (6 per case) $180.00 $180.00 700362 (Special Order Only) Predator Replacement Cylindrical HEPA Filter (1ea) $140.00 $140.00 700363 10” Exhaust Locking Clamp (1ea) $22.00 $22.00 700364 Clear Mylar Ducting 10” Diameter, 25’ Length (6 per case) $100.00 $100.00 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 53 REMEDIATION & SAFETY PRODUCTS Air Sanitizing System NASA Technology Eradicates Airborne Pathogens* No More Indoor Air Pollution. Finally, Clean Indoor Air! No Ozone- No Filters AiroCide Air Improvement™ System The patented AiroCide technology combines two known pathogen-killing techniques, Photocatalytic oxidation (PCO) and ultraviolet light to destroy harmful airborne microbes. A titanium dioxide photocatalyst is used in the PCO process. These active elements will oxidize volatile organic compounds (VOC’s) adsorbed on the catalyst surface and kill and decompose airborne pathogens. AiroCide Helps Solve Your Indoor Air Problems clinically tested ◘ No Ozone – No Filters ◘ Easy to Install – Inexpensive to Operate ◘ No costly Clean Ups ◘ Low Maintenance ◘ Self Cleaning, No Harmful By Products ◘ Safe, Operates 24/7 ◘ Low Energy Requirement ◘ Eliminates Gaseous Chemicals, VOC’s and Odors ◘ Not Affected by Humidity ◘ Compatible with Existing Airflow Systems ◘ Enhances Air Mixing with HVAC Systems ◘ NASA developed for space travel Mold Remediation Multi-Family Housing Healthcare Settings Long Term Care Education Government Industrial Child Care Military * Listed as an FDA Class II Medical Device. Clinically proven and field tested to kill/ remove/ eliminate airborne pathogenic and non-pathogenic microorganisms in vegetative and spore states (bacteria, mold & fungi, viruses, and dust mites), allergens, odors and harmful volatile organic compounds(VOC’s) in Medical/ Healthcare, Residential Consumer Households, Child Care, Mold Remediation, Fitness and Sport Facilities, Corrections Facilities healthcare Applications: and Food Preservation applications. Construction: Aluminum and Stainless Steel Electrical: 120VAC, 2amp, 8 watt ultraviolet light bulbs, 6-120 VAC bulb ballasts, 8ft cord Controls: On/Off switch Maintenance: UV bulbs require annual replacement Specifications & Pricing ACS-25 ACS-50 ACS-100 1,000F3 to 1,500F3 15,000F3 to 30,000F3 25,000F3 to 50,000F3 (small room) (low traffic area) (high activity) Length 16” 30” 46.5” 12” 12” 13” Width 14.75” 30” 24.5” 4.75” 4.75” 7.35” Height 3.1” 3.5” 3.5” 4.5” 4.5” 4.5” Weight 12 lbs. 30 lbs. 59 lbs 1 lb. 2 lbs. 4 lbs. Price $1,195 $2,695 $4,850 $65 $225 $499 Range child care 54 Toll Free: 1.800.293.3003 emssales.net Bulb Kit ACS-25 Bulb Kit ACS-50 Bulb Kit ACS-100 - - - providing environmental products for a safer tomorrow REMEDIATION & SAFETY PRODUCTS IAQ Disinfectants & Coatings Disinfectant Solution (Spray & Gallon Sizes) #120935 & 120937 Cleans, disinfects and deodorizes! Non-staining and non-abrasive. Continuous residual bacteriostatic activity for up to 6 months! Compatible with plastics, wood, glass and metals. A perfect disinfectant for cleaning all IAQ equipment including respirators, pumps, impactors and wall checks! Reduce the liability of cross-contamination! Case pricing available! Disinfectant Towelettes (Canister) #120933 The only disinfectant wipe accepted by the EPA & FDA to date! A perfect wipe to clean your impactors, borescopes, respirators and much more. An ideal way to minimize crosscontamination! Available in canisters with 180 wipes per canister. Case pricing available! Full Line Distributor For Fiberlock Call For More Available Products: 1.800.293.3003 ShockWave is an EPA-registered, quaternary ammonium chloride cleaner, disinfectant and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a concentrated formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave is especially useful as an allin-one product for treating wood structural members, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project. ShockWave is designed to be diluted two ounces per gallon of water*, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs. Fiberlock IAQ 6000 is an extremely durable coating developed to withstand moist, humid conditions that provide the ideal environment for fungal growth. This easy to apply, 100% acrylic coating offers the ultimate in durability in combination with excellent mold resistance. Fiberlock IAQ 6000 contains an EPA-registered, broad-spectrum fungicide to prevent the growth of mold on the surface of the cured film. Plus, its smooth finish minimizes dirt buildup that provides nutrients for mold growth. Fiberlock IAQ 6000 is recommended for use on plaster, wallboard, sheetrock, concrete, masonry block, wood, primed metal and galvanized metal. Fiberlock IAQ 6000 does not contain any compounds with toxic metals such as barium, boron or zinc, which are present in other mold-resistant coatings. Fiberlock IAQ 6000 yields a clean white finish; clear and black finishes are also available: IAQ 6100 (Clear) and IAQ 6500 Black. PART # PRODUCT DESCRIPTION 120953 clear & black finishes available LIST PRICE ems PRICE DISINFECTANTS & COATINGS 120950 120933 Sporicidin Disinfectant Wipes 180/canister $8.99 $8.99 120935 Sporicidin Disinfectant Pump Spray 22oz. $8.99 $8.99 120937 Sporicidin Disinfectant Solution 1gal. $25.95 $25.95 120941 Sporicidin Individual Wipes 50PK $19.95 $19.95 120950 Fiberlock ShockWave 1 Gallon Concentrate (Makes 64 gallons) $34.95 $29.95 120953 Fiberlock IAQ 6000 Coating / WHITE FINISH ((also available in black (IAQ 6500)) $229.00 $199.00 120954 Fiberlock IAQ 6100 Coating/CLEAR FINISH $229.00 $199.00 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 55 REMEDIATION & SAFETY PRODUCTS Hepa Vacuums, Filters & Accessories OMEGA OMEGA High Capacity 5 Gallon Vacuum Portable 1 Gallon Vacuum 700305 700305 700303 The Omega Abatement Vac is a safe and easy way to remove contaminants such as asbestos, lead residue, atmospheric dust, medical residue and fumes! The Omega Abatement Vac features a self-contained filtration system that captures hazardous particles as small as 0.3 micron. It includes two filter plugs, disposable bag and tie to prevent particles from escaping into the air or getting on hands and clothes when disposing filter. Plus, its 6’ clear hose allows the operator to visually check for any remaining particles in the hose. As with all Omega models, this vac is made from high-impact styrene construction for durability and long life. Because it is lightweight and portable, the Omega Vac Abatement is ideal for glove bags, ladders, or other hard-to-reach applications. It comes complete with a handy shoulder strap and accessories which store conveniently in the case cover. Features: • Hepa Filter - For asbestos, fumes, lead residue, atmospheric dust, etc. It includes two filter plugs, disposable bag and tie for safe disposing of filter. • Clear 6’ Hose - Provides an additional safety feature for the operator. • Flexible Goose Neck - To get to those hard-to-reach places! • Crevice Tool & Crevice Tool Brush - To loosen particles in tight areas. • Utility Nozzle - A 5 1/2” wide tool for cleaning floors, cupboards, etc. • 220 Volt Model is also available for world-wide use! • Weights only 12 lbs and is 19.5” x 9” x 6.25” PART # The HCTV5 Abatement Vac has a large 5-gallon capacity, cost effective solution for the user who works with high volumes of fine dry particle debris like that associated with asbestos, lead, indoor air quality, atmospheric dust and medical residue. This hepa vac comes with standard 0.3-micron, 5 gallon, sealable, disposable HEPA filter. It includes a lid to cover the 5-gallon bucket to prevent particles from escaping into the air or getting on hands and clothes when disposing the filter. Specifications: 115 VAC, Volume: Vacuum: Speed: 1 phase, 50/60 Hz, 675 watts, UL & CSA listed 92.8 cfm open orifice, zero cfm sealed 28.79 inch water column open orifice 40-inch sealed = 1 inch column 20,000 RPM open orifice, 25,000 sealed orifice Features: • 5 gallon HEPA filter – for asbestos, fumes, lead residue, atmospheric dust, etc. It includes two filter plugs, disposable bag and tie for safe disposing of filter. • Clear 9’ hose that allows the operator to visually check for any remaining particles in the hose. • Foot switch for easy hands-free operation • Convenient, detachable roller base • Powerful 115V, 675 watt, 50/60 Hz, UL & CSA listed • Volume is 92.8 cfm open orifice, zero cfm sealed • Vacuum is 28.79 inch water column open orifice (40-inch sealed = 1 inch column) • Speed is 20,000 RPM open orifice; 25,000 sealed orifice PRODUCT DESCRIPTION LIST PRICE ems PRICE HEPA VACUUMS 700303 Omega Supreme Portable Asbestos / Lead Hepa Vacuum (Includes 0.12 micron hepa filter) $249.00 $236.00 700305 5 Gallon Asbestos / Lead Vacuum (Includes 0.12 micron hepa filter) $455.00 $449.00 HEPA FILTERS & ACCESSORY KIT FOR VACUUMS 700311 Hepa Omega Portable 0.12 micron Filter Only $31.95 $29.00 700313 Hepa Omega 5 Gallon 0.12 micron Filter Only $75.50 $69.00 Omega Vacuum Accessory Kit (Fits Both Styles 700303 & 700305) $55.95 $50.95 700315 Kit Includes: (2) 20” Straight Wands, (1) 10” Carpet Wand, (1) 10” Horse Hair Floor Brush, (1) 11” Curved Neck, (1) Accessory Caddy 56 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow REMEDIATION & SAFETY PRODUCTS Hepa Vacuums, Filters & Accessories V8000WD WET/DRY HEPA VACUUM For Construction & Renovation, Restoration, Mold Remediation & Healthcare The V8000WD is a versatile HEPA vacuum that features superior suction performance, a lowprofile design, low noise level, highest quality components and materials, and all the power you need to do a better cleaning job, with less effort and in a shorter time. Removes dust, dirt and non-flammable liquids. This unit is rated at 1.6 HP, 120 CFM air flow and a vacuum waterlift of 90 inches. It features a 99.97% efficient @ 0.3 microns HEPA filter, making it ideal for applications wherever HEPA filtration is required to eliminate airborne contaminants and/or to comply with applicable regulations. Furnished with combination floor nozzle, crevice tool, universal nozzle, HEPA filter and paper filter bag. PROJECT APPLICATIONS • Construction & Renovation • Mold Remediation • Healthcare • Cleaning & Restoration 700343 PART # FEATURES • Stable, Low-Profile Design • Powerful Operation • ETL Tested & Certified for Safe Electrical Operation • Individually Tested & Certified 99.97% HEPA • Slim & Easy to Transport • Easy-Emptying Tank • Low Noise Level • Quality Components Throughout • Chrome Wand & Extension • One Year Limited Warranty TECHNICAL DATA Power: Peak Power: Air Flow: Waterlift: Noise Level: Tank Volume: LxWxH: Weight: Hose (dia & len): PRODUCT DESCRIPTION 1.6 HP 7.25 HP 120 CFM 90” w.g. 59 db(A) 8 gallons 15” x 15” x 22” 22 lbs 1.5” x 10’ LIST PRICE ems PRICE $595.00 $595.00 HEPA VACUUM 700343 Wet/Dry HEPA Vacuum. Includes floor nozzle, crevice tool, universal nozzle, HEPA filter and paper filter bag. 700344 Paper Filter Bags with Sliding Containment Lock (5/case) $39.00 $39.00 700345 HEPA Filter (1ea) $160.00 $160.00 700346 18” Industrial Metal Floor Nozzle (1ea) $72.00 $72.00 700347 18” Industrial Metal Squeegee (1ea) $72.00 $72.00 Environmental Monitoring Systems Toll Free: 1.800.293.3003 emssales.net 57 REMEDIATION & SAFETY PRODUCTS Respirators, Filters & Accessories CA102 North Compact Air PAPR 110132 The North Compact Air™ PAPR is a belt mounted PAPR designed to provide respiratory protection from gases, vapors and particulates depending on the air purifying elements used. This PAPR is NIOSH approved for use with North 5500, 7700, 5400 and 7600 Series tight fitting facepieces. If you have an existing North 1/2 face or full face respirator you can convert it to a full featured PAPR. DraEger Piccola Mask with Exhalation Valve N95 110100 Filtering face pieces approved according to the protective level N95 - offer a filtration efficiency of 95% particles down to 0.3 microns. The Piccola N95 is available with exhalation valve for improved breathing comfort. Each mask is individually and hygienically packaged with 20 pieces in one dispenser box. North Series Half Mask 7700 110105 PART # Air-Purifying Respirators (NIOSH Certified) The North 7700 Series is the best selling and most comfortable half mask respirator available today. What makes it so comfortable? For one thing, the facepiece is made of soft, hypoallergenic silicone. Because silicone is so much more flexible than organic rubber, it conforms to a worker’s face. And three facepiece sizes make it much easier to fit your workers. The North 7700’s cradle suspension system also adds to the comfort of this respirator. The North 7700 doesn’t slip like respirators with conventional strap systems. The cradle suspension gives an even seal without creating pressure points. The low profile of the North 7700 gives workers a wide field of vision and room for protective eyewear. Its low inhalation and exhalation resistance makes breathing easier, leaving more energy for production. PRODUCT DESCRIPTION LIST PRICE ems PRICE $32.95 $29.95 Draeger Mask 110100 Draeger Piccola N95 Mask with exhale valve (20 per box) NORTH RESPIRATORS & ACCESSORIES 110101 North 1/2 Face Respirator Size Medium (7700-30M) FILTERS NOT INCLUDED $19.95 $17.50 110105 North 1/2 Face Respirator Size Large (7700-30L) FILTERS NOT INCLUDED $19.95 $17.50 110109 North 1/2 Face Respirator Size Small (7700-30S) FILTERS NOT INCLUDED $19.95 $17.50 110111 North 1/2 Face Inhale Valve (6 Per Pack) $9.95 $9.95 110113 North 1/2 Face Exhale Valve (4 Pack) $10.95 $10.95 110115 North HEPA Filters 2/pk. (Magenta) $7.50 $5.99 110121 North OV/AG Organic Filters 2/pk. (Magenta & Yellow) $16.95 $15.50 110123 North OV/P100 2/pk. (Magenta & Black) $15.95 $14.95 110125 Polyken Respirator Wipes 100/pk. $20.95 $19.95 110130 North 7600 Full Face Respirator Size Small $179.00 $169.00 110131 North 7600 Full Face Respirator Size Medium/Large $179.00 $169.00 110132 North CA102 PAPR $799.00 $679.00 110133 North CA102 Hepa Filters (Case / 12 filters) $209.00 $197.50 58 Toll Free: 1.800.293.3003 emssales.net North Series Respirators 7600 110131 110105 110115 110121 The North 7600 Series full facepiece respirators are designed to provide eye, face and respiratory protection while providing optimum comfort. While affording an over 200° field of vision, the hard coated polycarbonate lens protects the wearer’s eyes and face against irritating gases, vapors and flying particles. The polycarbonate lens also features optical properties similar to the Norton180® Protective Spectacle to minimize distortion and astigmatism. providing environmental products for a safer tomorrow REMEDIATION & SAFETY PRODUCTS Respirators, Filters & Accessories 3M RACAL P. A . P. R . Racal 110215 to 110210 110125 • NIOSH/MSHA approved • Meets impact and penetration requirements of ANSI Z87.1-1989 (Eye & Face Protection) • Positive Pressure, Constant Flow • Mask-mounted Motor/Airflow Unit • Minimum 4 cubic feet (115 liters) air/minute • Lightweight, compact, mobile • Rechargeable Nickel Cadmium Battery Pack • Delivers up to 8 hours of continuous battery use • Easily decontaminated VeriFit Irritant Smoke Kit for Respirator Fit Testing Patented all-in-one design is convenient and complete; no components to lose. Its small integrated bellows pump provides the optimum amount of smoke for fit testing yet minimizes the risk of overexposure. The plastic smoke generator eliminates danger from exposed broken glass for safer operation and disposal. Respirator fit testing is accomplished in three simple steps with VeriFit Irritant Smoke Generators: (1) Bend the smoke generator to break the enclosed ampoule. (2) Remove cap. (3) Wait 5 seconds and compress bellows 600176 Draeger Air Current Tube Kit PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE $395.00 $369.00 RACAL P.A.P.R. & ACCESSORIES 110201 Racal P.A.P.R. Power Flow Complete (HEPA Filter, Battery & Charger Included) 110205 Racal P.A.P.R. Battery Charger $69.99 $59.99 110210 Racal Battery Pack P.A.P.R. $219.00 $199.00 110215 Racal SP-3 P.A.P.R. Filters $12.95 $12.95 SMOKE & FIT TEST TUBES & KITS 600172 Environmental Monitoring Systems 600183 Sensidyne Brand - Manual Smoke Tube Kit (10 Tubes) (Irritant Smoke) $69.00 $65.00 600185 Sensidyne Brand - Smoke Tester Tubes (10 Tubes) (Irritant Smoke) $39.00 $35.00 600176 VeriFit Irritant Smoke Kit for Respirator Fit Testing (10 Tubes) (Irritant Smoke) $25.00 $25.00 600171 Draeger Air Current Tubes (10 Tubes) (Non-Irritant Smoke) $59.00 $55.00 600172 Draeger Air Current Tube Kit (10 Tubes) (Non-Irritant Smoke) $99.50 $99.50 Toll Free: 1.800.293.3003 emssales.net 59 REMEDIATION & SAFETY PRODUCTS Protective Apparel & Accessories Tyvek® offers a one-of-a-kind, inherent barrier that won’t rip, abrade or puncture as easily as the barrier in laminates. Specially created by DuPont® scientists and backed by DuPont® technology, Tyvek® holds out 97% of asbestos, 99% of bacteria and 98% of ambient particles. Particles less than 5 microns in size are no match for Tyvek®. Tyvek® garments provide protection from nuisance dry particulates, such as dirt and dust, to hazardous particles and fibers, such as lead paint and asbestos. PART # PRODUCT DESCRIPTION LIST PRICE ems PRICE PROTECTIVE CLOTHING & ACCESSORIES 110520 110515-S Tyvek® Coverall Zipper Front, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(S) $135.00 $127.95 110515-M Tyvek® Coverall Zipper Front, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(M) $135.00 $127.95 110515-L Tyvek® Coverall Zipper Front, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(L) $135.00 $127.95 110515-XL Tyvek® Coverall Zipper Front, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(XL) $135.00 $127.95 110517 Tyvek® Coverall Zipper Front, Hood, Boots, Elastic Wrist & Ankles (25 ea.) (2X) $142.95 $135.95 110519 Tyvek® Coverall Zipper Front, Hood, Boots, Elastic Wrist & Ankles (25 ea.) (3X) $152.95 $145.95 110520 Dansafe Booties, PE Coated Polypropylene (200pr) White, Elastic $44.50 $39.95 700110-L Nitrile Gloves, Non-Latex, Powder free, (100/pk) Large $12.95 $8.95 700110-XL Nitrile Gloves, Non-Latex, Powder free, (100/pk) X-Large $12.95 $8.95 110516-L ems Basic Coverall, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(LG) $49.95 $40.00 110516-XL ems Basic Coverall, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(XL) $49.95 $40.00 110516-2X ems Basic Coverall, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(2X) $49.95 $40.00 110516-3X ems Basic Coverall, Hood, Boots, Elastic Wrist & Ankles (25 ea.)(3X) $49.95 $40.00 ems Basic Coveralls The ems BASIC COVERALL provides an economical cost alternative to traditional coveralls. Zipper front, 1.25 ounce Polypropylene Coveralls (Includes attached hood, booties, and elastic wrist & ankles.) 25ea per Box. Dirt, grime and dust are no match for these coveralls made from lightweight polypropylene. The soft material offers superb airflow to keep workers cool. 60 Toll Free: 1.800.293.3003 emssales.net providing environmental products for a safer tomorrow
advertisement