CONSTRUCTION-MATH “POWER TOOLS” ™
CONSTRUCTION MASTER PRO DT PRINTER
®
PRINTING DESKTOP MODEL
Advanced Construction Math Calculator
Contractors • Estimators
Plan-Checkers • Builders • Framers
Detailers • Architects • Engineers
n Cut Costs,
Errors and
Rework
n Get Accurate
Estimates and
Award Winning
Bids
n Automatically
Print Each
Calculation
Step
Perfect for estimators, plancheckers, detailers, contractors
or anyone who wants the
time-saving convenience
and confidence that a
hard-copy print-out
provides.
■ Exclusive! Built-in
■
■
■
■
■
■
■
■
■
■
Paper Tape Printer
Lets you record your
calculations, double check
your entries and answers, or
review your calculations — step-by-step,
on paper! Print all multiple-answer solutions
(like Stairs and Rafters) with the single press
of a button. User selected modes for Print/
Non-Print/Print-List settings. Operates on
either AC or batteries.
Works in and Converts Between
All Dimensional Formats
Work in the units of your choice; Feet, Inches,
Fractions, Yards and Metric — including
Square and Cubic formats.
Rafters and Right Angles
Custom Rafter keys give you Common Rafters,
Regular (45°) and Irregular (non-45°) Hips,
Valleys and Jacks.
Improved Rake-Wall Key
Determines each stud length for any on-center
spacing in ascending or descending order.
Enhanced Stair Solutions
Everything you need to layout your next stairway with confidence: Risers, Treads, Stringer
Length, Incline Angle and more.
Advanced Circular Solutions
Complete built-in solutions for arches, columns,
cones, windows, pillars, post-holes and more.
Jack Rafter Functions
Complete solutions in ascending or descending
order for regular and irregular-pitch roofs.
Trigonometric Functions
Sine, Cosine, Tangent, Arcsine, Arccosine and
Arctangent simplify complex design and construction math.
Automatic Block and Footing keys
Pitched Roof Area key
D:M:S to Decimal Degree Conversions
ETRIC
ODE
BUILT-IN
■ Backspace Key
■
■
■
■
■
■
■
■
■
Easily change just-entered values without reentering everything.
Three Built-in Memories
Store constants or accumulate values in any
format.
Exponential Notation
Enter and display exponential values.
User-Set Preferences
Allows permanent setting of many userdefined options including printing options.
Custom-Set Fractions
Set to 1/2, 1/4, 1/8, 1/16, 1/32, 1/64.
Board Feet Lumber Estimating
Easily estimate material amounts.
Fast Per-Unit Cost Solutions
For easy unit costing and pricing.
Weight Per Volume Conversions
Jumbo Display
Large, clear digits on an easy-to-read LCD
display.
More Features
Also works as a standard math calculator
with Auto Shut-Off, +/–, %, π, x2 and Square
Root, plus Constant Operator. Includes a
large, example filled User’s Guide, AC
Power Supply, (will operate on 4 double
“AA” batteries — not included) and a Full
One-Year Warranty.
Advanced Construction-Math Calculator
CONSTRUCTION MASTER PRO
®
DT PRINTER
Printing Desktop Model
The premier Feet, Inch, Fraction and Dimensional
calculator for design, building and construction pros.
Model 44065
Construction math problems
are simple to solve!
Dimensional math.
Simply press the number and then
“label” it as “Feet,” “Inches,” or
whatever format you are using…
uare
Sq
ming
Fra
STEP
Reset calculator
1st value
2nd value
3rd value
Total length
KEYSTROKE
[Conv] [×]
6 [Feet] 3 [Inch] 5 [/] 8
[+] 252 [Inch]
[+] 23 [MM]
[=]
TAPE/DISPLAY SHOWS
0.
6 FEET 3-5/8 INCH
252 INCH
23 MM
27 FEET 4-1/2 INCH
Finding common rafter length
with pitch unknown.
Find the Common rafter length for a roof
with a rise of 6 feet 11-1/2 inches and a run
of 14 feet 6 inches. Solve for the pitch in
inches and degrees…
STEP
Clear calculator
Enter rise
Enter run
Find common rafter length
Find degree of pitch
Find pitch in inches
KEYSTROKE
TAPE/DISPLAY SHOWS
[On/C][On/C]
0.
6 [Feet] 11 [Inch] 1 [/] 2 [Rise] RISE 6 FEET 11-1/2 INCH
14 [Feet] 6 [Inch] [Run]
RUN 14 FEET 6 INCH
[Diag]
DIAG 16 FEET 1 INCH
[Pitch]
PTCH 25.64°
[Pitch]
PTCH 5-3/4 INCH
Finding stair riser height and number
of risers for custom stairs.
You’re building an access stairway for a client
who can’t handle conventional-height stairs. If
the total rise is 3 feet 9 inches and your desired
riser height is approximately 5-1/2 inches, find
the actual riser height, number of risers and
underage or overage remaining…
STEP
Clear calculator
Enter rise
Enter riser height
Find actual riser height
Find number of risers
Find underage/overage
Return to default
KEYSTROKE
[On/C][On/C]
3 [Feet] 9 [Inch] [Rise]
5 [Inch] 1 [/] 2 [Stor] [Stair]
[Stair]
[Stair]
[Stair]
7 [Inch] 1 [/] 2 [Stor] [Stair]
TAPE/DISPLAY SHOWS
0.
RISE 3 FEET 9 INCH
R-HT 5-1/2 INCH
R-SZ 5-5/8 INCH
RSRS 8.
R+/- 0 INCH
R-HT 7-1/2 INCH
Construction Master® and Calculated Industries® are registered trademarks
of Calculated Industries, Inc. © 2002. All rights reserved. Patent Pending.
Product Specifications for
Construction Master Pro DT Printer:
Size:
7.6" x 9.8" x 2.2" (193 mm x 248 mm x 56 mm)
Weight:
1.08 lb. / 10.8 oz. (488.0 gm.)
Does not include User’s Guide
Power:
6V AC Adapter or 4 “AA” Batteries
Display:
11 Digits (7 Normal, 4 Fractions) with Full Annunciators
LCD Dimensions:
0.9" x 4" (22 mm x 101 mm)
Accuracy:
10 Digit Internal Accuracy
Included with Every
Construction Master Pro DT Printer:
Easy-to-follow User’s Guide, AC power supply.
One Year Warranty:
All Calculated Industries calculators and electronic tools are
covered by a Full One-Year Limited Warranty against defects
in materials and workmanship. The full text of each warranty
is published in the documentation accompanying each product
and at www.calculated.com. Calculated Industries reserves the
right to make changes in the materials and specifications of
products without notice.
AUTHORIZED DEALER:
CS2300 • 9/02
">
