advertisement
![Denon DRA697CI Operating instructions | Manualzz Denon DRA697CI Operating instructions | Manualzz](http://s1.manualzz.com/store/data/001577411_1-e23407d046ef70448ace2c42f9fcc79a-360x466.png)
AM-FM STEREO RECEIVER
DRA-697CI
OPERATING INSTRUCTIONS
ENGLISH
¢SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS
1.
Read Instructions – All the safety and operating instructions should be read before the product is operated.
2.
Retain Instructions – The safety and operating instructions should be retained for future reference.
3.
Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
4.
Follow Instructions – All operating and use instructions should be followed.
5.
Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
6.
Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7.
Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8.
Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
9.
A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
11. Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
12. Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
13. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
15. Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A.
16. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
17. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
21. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance – this indicates a need for service.
22. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
24. Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
25. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
I
ENGLISH
FCC INFORMATION (For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC, to use the product.
3. NOTE
This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.
¢NOTE ON USE
• Avoid high temperatures.
Allow for sufficient heat dispersion when installed in a rack.
• Keep the apparatus free from moisture, water, and dust.
• Do not let foreign objects into the apparatus.
• Unplug the power cord when not using the apparatus for long periods of time.
• Do not let insecticides, benzene, and thinner come in contact with the apparatus.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
• Never disassemble or modify the apparatus in any way.
II
ENGLISH
Thank you for choosing the DENON DRA-697CI AM-FM Stereo Receiver. This remarkable component has been engineered to provide outstanding high fidelity reproduction of your favorite music sources.
As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding.
Operating the remote control unit
Operating DENON audio components ·······································22
Setting the preset memory function ··········································22
Setting the punch through function···········································22
Operating a component stored in the preset memory ····22 ~ 24
Contents
Getting Started
Accessories······················································································1
Before using ····················································································2
Cautions on installation ·································································2
About the remote control unit························································2
Inserting the batteries ····································································2
Operating range of the remote control unit ································2
Part names and functions ······························································3
Front panel ·····················································································3
Display····························································································3
Rear panel ······················································································4
Remote control unit ···································································4, 5
Connections
Cable indications ············································································5
Speaker connections ······································································6
Connecting a DVD player and monitor ········································6
Connecting a TV/DBS tuner ··························································7
Connecting a CD player ·································································7
Connecting a turntable ··································································7
Connecting a tape deck, CD recorder or MD recorder················7
Connecting a VCR···········································································7
Connecting the antenna terminals ···············································8
Connecting the XM terminal ·························································8
Connecting the iPod® ····································································9
Connecting the MULTI ZONE terminals ·······································9
ZONE2 (or ZONE3) PRE OUT connections ····································9
Connecting the TRIGGER OUT jacks ··········································10
Connecting the RS-232C terminal···············································10
Connecting the AUDIO PRE OUT/MAIN IN terminals ··············10
Connecting the power supply cord ············································10
Setup Menu
Setting the iPod Assignment····················································11
Setting the Trigger Out ·····························································11
Setting the High Pass Filter ······················································12
Troubleshooting ············································································25
Operation
Before operating ···········································································12
Playing the input source ······························································12
Turning the sound off temporarily (MUTING)·······························12
Listening over headphones ··························································12
Switching the speakers ·······························································12
Checking the currently playing program source, etc. ··················13
Switching the brightness of the display·······································13
Selecting the play mode (PURE DIRECT) ····································13
Setting the tone control ·······························································13
Adjusting the speaker volume ·····················································13
Combining the currently playing sound
with the desired image (VIDEO SELECT function)····················13
Listening to the radio ···································································14
Auto preset memory ····································································14
Auto tuning···················································································14
Manual tuning ··············································································14
Preset memory ············································································14
Recalling preset stations ······························································14
XM Satellite Radio········································································15
Checking the XM signal strength and Radio ID ···························16
Channel selection ·········································································16
Category search ···········································································16
Direct access of channels ····························································16
Playing the iPod® ·········································································17
Listening to music········································································17
Listening to music in the Browse mode······································18
Viewing still pictures and videos (only for iPods equipped with the slideshow/video function) ······························18
Disconnecting the iPod ································································18
Multi zone music entertainment system ···································19
Multi-zone playback using the ZONE2 and
ZONE3 PREOUT terminals···························································19
Outputting a program source to amplifier, etc., in the ZONE2
(or ZONE3) room (ZONE2 or ZONE3 SELECT mode) ··················20
Remote control unit operations during multi-source playback·····20
Recording (audio and/or video) ··················································21
About the memory functions ······················································21
Initialization of the microprocessor ············································21
Specifications ················································································26
Getting Started
Accessories
Check that the following parts are attached in addition to the main unit: q Operating instructions ..............................................................1
w Warranty (for North America model only).....................................1
e Service station list ....................................................................1
r Power supply cord (Approx. 5.6 ft / 1.7 m) ..............................1
t System remote control unit (RC-1052).....................................1
y R6P/AA batteries (For the RC-1052).........................................2
u ZONE remote control unit (RC-1056) .......................................1
i R03/AAA batteries (For the RC-1056) ......................................2
o AM loop antenna ......................................................................1
!0
FM indoor antenna ...................................................................1
r t y u i o !0
1
ENGLISH
Getting Started
Before using
Pay attention to the following before using this unit:
• Moving the unit.
To prevent short-circuits or damaged wires in the connection cables, always unplug the power supply cord and disconnect the connection cables between all other audio components when moving the unit.
• Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so, move the mobile phone away from this unit when it is in use.
• Before turning the power operation button on.
Check once again that all connections are correct and that there are not problems with the connection cables. Always set the power operation button to the standby position before connecting and disconnecting connection cables.
• Store the operating instructions in a safe place.
After reading the operating instructions, store them in a safe place as they could come in handy in the future.
• Whenever the power operation button is in the STANDBY state, the unit is still connected to AC line voltage.
Please be sure to turn off the power switch or unplug the cord when you leave home for, say, a vacation.
• Note that the illustrations in these instructions may differ from the actual unit for explanation purposes.
About the remote control unit
In addition to controlling the DRA-697CI, the attached system remote control unit (RC-1052) can also be used to control the following products: q DENON component products w Component products other than DENON:
• Set using the preset memory function ( page 22).
Inserting the batteries
q Remove the remote control unit’s rear cover.
(RC-1052) (RC-1056) w Set two batteries in the battery compartment in the indicated direction.
ENGLISH
Getting Started
Notes on batteries:
• Replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the unit.
(The attached batteries are only for verifying operation.)
• When inserting the batteries, be sure to do so in the proper direction, following the “<” and “>” marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in flames.
• If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
• Remove the batteries from the remote if it will not be in use for long periods.
• When replacing the batteries, have the new batteries ready and insert them as quickly as possible.
Operating range of the remote control unit
• Point the remote control unit at the remote sensor when operating it.
• The remote control unit can be used from a distance of approximately
23 feet/7 meters, at a horizontal angle of up to 30° with respect to the sensor.
Cautions on installation
Note:
For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure.
R6P/AA
R03/AAA
Note
(RC-1052) e Put the rear cover back on.
(RC-1056)
Wall
30°
30° or
(RC-1056)
Approx. 23 feet/7 m
(RC-1052)
NOTE:
• The set may function improperly or the remote control unit may not operate if the remote control sensor is exposed to direct sunlight, strong artificial light from an inverter type fluorescent lamp or infrared light.
2
ENGLISH
ENGLISH
Getting Started
Part names and functions
For details on the functions of these parts, refer to the pages given in parentheses ( ).
Front panel
@7 @6 @5 @4 @3 @2 @1 @0 !9
!8
Display
i u y t
Getting Started r e q w e r t y u i !0
!3 !4
!5
!6
!7
q
Power operation button
(ON/STANDBY) ··········································(12) w
Power indicator ·········································(12) e
Power switch ·······································(12, 21) r
Headphones jack (PHONES) ·····················(12) t
MODE button ·······································(14, 18) y
SPEAKER buttons ······································(12) u
PURE DIRECT button·································(13) i
SHIFT button ··············································(14) o
XM RADIO button······································(16)
!0
TONE DEFEAT button ·······························(13)
!1
LOUDNESS button ····································(13)
!2
STATUS button ··········································(13)
!3
MENU button ·············································(11)
!4
TONE CONTROL button····························(13)
!5
SELECT knob········································(13, 17)
!6
CH VOL button···········································(13)
!7
ENTER button ······································(11, 18)
!8
VOLUME control knob ······························(12)
!9
ZONE on/standby buttons ·······················(20)
@0
Display
@1
TUNING buttons (•, ª) ·····························(14)
@2
PRESET buttons·········································(14)
@3
MEMORY button········································(14)
@4
Remote control sensor································(2)
@5
BAND button··············································(14)
@6
ZONE select buttons ·································(20)
@7
FUNCTION knob ········································(12) q w q
Information display w
Speaker indicators
This lights corresponding to the settings of the front speakers.
e
ZONE2/ZONE3 output indicators r
Volume indicator
This displays the volume level.
t
ZONE/REC SELECT indicators
Lights while selecting the ZONE or REC
SELECT mode. (Off when the “SOURCE” is selected.) y
AUTO indicator
This lights when the broadcast station is selected in the AUTO tuning mode.
u
STEREO indicator
This lights when an FM stereo broadcast has been received.
i
TUNED indicator
This lights when an FM/AM broadcast has been received.
3
ENGLISH
ENGLISH
Getting Started Getting Started
Rear panel
!8
!7
!6 e
!5
!4!3
!2 !1
!0
o
Remote control unit
¢ System remote control unit (RC-1052)
[ Front ]
Indicator ··························(22)
SHIFT button ··················(14)
Function buttons ············(12) q w e r t y q
AUDIO OUT terminals·································(7) w
SUBWOOFER PRE OUT terminal ···············(6) e
AUDIO IN terminals·····························(6, 7, 9) r
ZONE PRE OUT terminals···························(9) t
TRIGGER OUT jacks ··································(10) y
ZONE VIDEO OUT terminals ······················(9) u
Speaker terminals ·······································(6) i
AC outlets···················································(10) o
AC inlet ·······················································(10) u i
!0
AUDIO PRE OUT / MAIN IN terminals ····(10)
!1
VIDEO IN terminals ·····································(7)
!2
VIDEO OUT terminals ·····························(6, 7)
!3
RS-232C terminal ·······································(10)
!4
SIGNAL GND terminal ································(7)
!5
XM terminal ·················································(8)
!6
DOCK CONTROL jack ··································(9)
!7
ANTENNA terminals ···································(8)
!8
REMOTE CONTROL jacks ···························(9)
System buttons ··············(23)
MENU button ·················(11)
(
Cursor buttons
D , H , F , G ) ····················(17)
STATUS button ··············(13)
PURE DIRECT button ·····(13)
Remote control signal
transmitter ························(2)
Power buttons ················(12)
CHANNEL buttons ·········(14)
Volume control
buttons ····························(12)
MUTING button··············(12)
DIMMER button··············(13)
ENTER button···········(11, 18)
VIDEO SELECT
button······························(13)
Mode selector
switches ··············(12, 20, 22)
4
ENGLISH
NOTE:
• If buttons on the front or rear are pressed strongly, the button on the opposite side will be activated too.
ENGLISH
Getting Started
ZONE3 ON/OFF
buttons ····························(20)
ZONE2 ON/OFF
buttons ····························(20)
Number buttons
(0 ~ 9, +10) ··········(14, 16, 22)
BAND button ··················(14)
Memory block
buttons (A ~ G)···············(14)
Function buttons ············(12)
MAIN ZONE ON/OFF
buttons ····························(20)
[ Rear ]
¢ ZONE remote control unit (RC-1056)
[ Front ]
ZONE select switch········(20)
Function buttons ············(20)
Number buttons
(0 ~ 9)·························(14, 16)
SEARCH button ··············(16)
Memory block
buttons (A ~ G)···············(14)
NOTE:
• If buttons on the front or rear are pressed strongly, the button on the opposite side will be activated too.
MODE button············(14, 18)
MEMORY button ············(14)
TUNING buttons ············(14)
Connections
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
L
R
Audio cable
A
Analog connections (Stereo)
(White)
(Red)
Pin-plug cable
L
R
Video cable
D
Video connections
(Yellow)
Video cable (75 Ω/ohms video pin-plug cable)
B Analog connections
(Monaural, for subwoofer)
Signal direction
Audio signal
Pin-plug cable
C Speaker connections
IN OUT OUT
Video signal
IN
ZONE ON/OFF
buttons ····························(20)
IN OUT OUT IN
Speaker cable
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
Volume control
buttons ····························(20)
BAND button ··················(14)
5
ENGLISH
Connections
Speaker connections
Connect the speaker terminals with the speakers making sure that like polarities are matched (
< with
<
,
> with
>
).
¢ Speaker impedance
Speaker
A, B
A+B
Impedance
4 ~ 16 Ω/ohms
8 ~ 16 Ω/ohms
NOTE:
When making connections, take care that none of the individual conductors of the speaker cable come in contact with adjacent terminals, with other speaker cable conductors, or with the rear panel and screws.
NEVER touch the speaker terminals when the power is on. Doing so could result in electric shocks.
Connecting the speaker cables
1. Loosen by turning counterclockwise.
2. Insert the cable.
Either tightly twist or terminate the core wires.
Note on speaker impedance
When using speakers with an impedance below the designated value (for example 4
Ω/ohms), playing for long periods of time with the volume high could cause the temperature to rise, activating the protection circuit.
When the protection circuit is activated, the output to the speakers is cut off and the power indicator blinks. If this happens, unplug the power cord, wait for the set to cool off and improve ventilation around the unit. Also check the wiring of the input cables and the speaker cables. After doing this, plug the power cord back in and turn the unit’s power back on.
If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center.
3. Tighten by turning clockwise.
ENGLISH
Connections
¢ Connections
• When making connections, also refer to the operating instructions of the other components.
Subwoofer
Speakers
(B)
Speakers
(A)
Connection terminal for subwoofer with built-in amplifier.
IN
B
<
(L)
> >
(R)
<
C
Connecting a DVD player and monitor
<
(L)
>
C
>
(R)
<
Connecting banana plugs
D
Monitor
VIDEO
IN
Turn clockwise to tighten, then insert the banana plug.
D
A
L
R
DVD player
VIDEO
OUT
L
AUDIO OUT
L
R R
• Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definition disc player) to the DVD/VDP terminals in the same way.
6
ENGLISH
ENGLISH
Connections
Connecting a TV/DBS tuner
Connecting a CD player
Connecting a turntable
A
L
R
D
A
L
R
A
L
R
AUDIO OUT
GND
TV/DBS tuner
VIDEO
OUT
L
AUDIO OUT
L
R R
Connections
• The phono input can accept signals from moving magnet (MM) and high output moving coil (MC) phono cartridges. If your turntable is equipped with a low output MC cartridge, you will need to use a separate
MC head amplifier or step-up MC transformer.
NOTE:
• If humming or other noise is generated when the ground wire is connected to the SIGNAL GND terminal, disconnect the ground wire.
Connecting a tape deck, CD recorder or MD recorder
Tape deck/
CD recorder/
MD recorder
L
R
AUDIO IN
L
R
L
R
AUDIO OUT
L
R
CD player
L
AUDIO OUT
L
R R
A
L
R
A
L
R
Connecting a VCR
A
L
R
A
L
R
D
D
Video deck
VIDEO
IN
VIDEO
OUT
L
AUDIO OUT
L
R R
L
R
AUDIO IN
L
R
7
ENGLISH
Connections
Connecting the antenna terminals
An F-type FM antenna cable plug can be connected directly.
Direction of broadcasting station
FM antenna
75 Ω/ohms Coaxial cable
AM loop antenna
(Supplied)
FM indoor antenna (Supplied)
ENGLISH
Connections
Connecting the XM terminal
• DRA-697CI is the XM Ready® receiver. You can receive XM® Satellite Radio by connecting to the XM
Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service.
• Position the Home Dock antenna near a south-facing window to receive the best signal.
For details, see “XM Satellite Radio” ( page 15, 16).
When making connections, also refer to the operating instructions of the XM Mini-Tuner and Home
Dock.
XM Mini-Tuner and
Home Dock
AUX OUT
MX
AM outdoor antenna
Ground
¢ AM loop antenna assembly
1 2
Connect to the AM antenna terminals.
3
Connection of AM antennas
1. Push the lever.
2. Insert the conductor.
Remove the vinyl tie and take out the connection line.
4 a. With the antenna on top any stable surface.
Mount
Bend in the reverse direction.
b. With the antenna attached to a wall.
Installation hole Mount on wall, etc.
3. Return the lever.
NOTE:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
8
ENGLISH
NOTE:
• Keep the power supply cord unplugged until the XM Mini-Tuner and Home Dock connection has been completed.
• The XM name and related logo are registered trademarks of XM Satellite Radio Inc. All rights reserved.
• XM Ready is a registered trademark of XM Satellite Radio Inc. All rights reserved.
ENGLISH
Connections
Connecting the iPod
®
When using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCK
CONTROL jack on the DRA-697CI with a mini-jack and assign the iPod to any AUDIO terminal(s).
The diagram below shows an example of connections for when the iPod is assigned to the CD-R/TAPE terminals.
For instructions on assigning the iPod to a specific terminal, see “Setting the iPod Assignment” ( page 11).
For instructions on playing the iPod, see “Playing the iPod” ( page 17).
iPod
Connections
Connecting the MULTI ZONE terminals
For instructions on operations using the MULTI ZONE functions ( page 19).
ZONE2 (or ZONE3) PRE OUT connections
• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) preout (variable or fixed level) terminals can be used to play a different program source in ZONE2 (or
ZONE3) the same time ( page 19).
• The ZONE2 video out is only for the ZONE2.
• The ZONE3 video out is only for the ZONE3.
Input
+ +
Output
Extension terminal for future use.
AUX OUT
Infrared retransmitter Infrared sensor
ASD-1R
A
R
L
Monitor (S VIDEO IN)
R
L
AUDIO OUT
G
A
L
R
VIDEO
IN
L
R
L
R
IN
• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
9
ENGLISH
Connections
Connecting the TRIGGER OUT jacks
Turn the DC 12 V voltage on and off for the individual functions.
Connecting the AUDIO PRE OUT/MAIN IN terminals
A
L
R
A
L
R
ENGLISH
Connections
Premain amplifier or
Power amplifier
(MAIN)
L
R
L
R
IN
L
R
L
R
OUT
Connecting the RS-232C terminal Connecting the power supply cord
This terminal is used for an external controller.
Perform the following operation before using an external controller connected to the RS-232C terminal:
1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode.
2. Perform the operation to turn off the power from the external control.
3. Check that the product has been set to the standby mode.
After checking the above, check the connections of the external controller. Operation is possible.
Power supply cord
(Supplied)
AC outlet
(wall)
AC 120 V, 60 Hz
AC OUTLETS
• SWITCHED (total capacity – 120 W (1 A))
The power to the outlet is turned on and off in conjunction with the POWER switch on the main unit, and when the power is switched between on and standby from the remote control unit.
No power is supplied from this outlet when this unit’s power is at standby. Never connect equipment whose total power consumption exceeds 120 W (1 A).
NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
• Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other electrical appliances.
10
ENGLISH
ENGLISH
FUNCTION
<SPEAKER>
<POWER>
<ON/STANDBY> <PHONES>
FUNCTION
ENTER
MENU
[MODE SELECTOR 1]
FUNCTION
Setup Menu
MENU ENTER
VOLUME
<SELECT>
<CH VOL>
[POWER ON]
VOLUME
[MUTING]
[D H F G]
[MODE SELECTOR 2]
Setting the iPod Assignment
It is possible to assign the Control Dock for iPod’s (ASD-1R, sold separately) audio to any input terminals on the DRA-697CI and play them.
Setting the Trigger Out
Use the DC 12 V output of the DRA-697CI’s two trigger out jacks in association with the various input sources.
1 Press MENU with the function set to something other
“FM/AM”, “XM” or the function selected at “iPod
Assignment”.
1 Press MENU with the function set to something other
“FM/AM”, “XM” or the function selected at “iPod
Assignment”.
2 Press
<CH VOL> then press ENTER .
or [D H] to select “iPod Assign”,
2 Press <CH VOL> then press ENTER .
or [D H] to select “Trigger Out”,
3 Use <SELECT> or press [F to select the trigger out jacks, then press ENTER .
3 Use <SELECT> or press [F to set.
DVD, VCR, V.A:
When using a Control Dock for iPod, it is possible to connect with the audio and video input terminals of the assigned function.
CDR, CD:
When using a Control Dock for iPod, it is possible to connect with the audio input terminal of the assigned function.
None:
Select this when not assigning an iPod to the DRA-697’s input terminal.
4
5
Use <SELECT> or press [F to select “ZONE”, then press ENTER .
Press <CH VOL> or [D H] to select the input source, then use <SELECT> or press [F to set.
ON, OFF:
When that input source is selected, the power supplied from the trigger out jack turns on or off.
4 Press ENTER .
Canceling setup menu:
To cancel the setup menu press MENU.
6 Press ENTER .
Canceling setup menu:
To cancel the setup menu press MENU.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
1
S y s t e m S e t u p
2
3
S y s t e m S e t u p i P o d A s s i g n i P o d A s s i g n i P o d : D V D
1
S y s t e m S e t u p
2
3
S y s t e m S e t u p
T r i g g e r O u t
T r i g g e r O u t
T r i g g e r O u t 1
4
T r i g g e r O u t 1
Z O N E 2 / 3
5
T r i g g e r O u t 1
D V D / V D P O N
11
ENGLISH
ENGLISH
Setup Menu
Setting the High Pass Filter
Set this to “ON” if your speakers do not have a very strong capacity for producing low bass.
Operation
Before operating
1 Press MENU with the function set to something other
“FM/AM”, “XM” or the function selected at “iPod
Assignment”.
2 Press <CH VOL> press ENTER .
or [D H] to select “H. P. F.”, then
1 Press <POWER> .
¢
ON:
The power indicator lights red.
£ OFF:
The power turns off and the indicator is off.
3 Use <SELECT> or press [F to set.
OFF:
Select this when not using a high pass filter.
ON:
Using the high pass filter makes it possible to reduce distortion of the bass sound.
2 Set [MODE SELECTOR 1] to “A”.
3 Set [MODE SELECTOR 2] to “CD/iPod”.
4
Press <ON/STANDBY> or [POWER ON] .
• The power indicator blinks green and the power turns on.
4 Press ENTER .
Canceling setup menu:
To cancel the setup menu press MENU.
Playing the input source
1
2
S y s t e m S e t u p
3
S y s t e m S e t u p
H .
P .
F .
H .
P .
F .
O N / O F F : O F F
1 Use FUNCTION to select the input source you want to play.
2 Start playback on the selected component.
For operating instructions, refer to the component’s manual.
3
Use VOLUME to adjust the volume.
• The volume level is displayed on the volume level display.
Turning the sound off temporarily (MUTING)
Press [MUTING] .
• Canceling MUTING mode:
To cancel the muting mode, either press [MUTING] or adjust the volume.
Listening over headphones
Connect the headphones to <PHONES> .
• No sound is produced from the speakers automatically.
NOTE:
• To prevent hearing loss, be careful not to raise the volume level excessively when using headphones.
Switching the speakers
Press
<SPEAKER> to turn the corresponding speaker pair on.
12
ENGLISH
ENGLISH
Operation
FUNCTION MODE <PRESET>
BAND SHIFT TUNING
MENU
STATUS
ENTER
<SELECT>
Checking the currently playing program source, etc.
Press STATUS .
• The current program source and various settings are indicated on the display.
¢ When you do not want to adjust the tone
Operation
Press <TONE DEFEAT> to select “TONE DEFEAT ON”.
¢ When listening with the volume turned low
Press <LOUDNESS> to select “LOUDNESS ON”.
Switching the brightness of the display
<ON/STANDBY> PURE DIRECT <LOUDNESS>
MEMORY <TONE DEFEAT>
<CH VOL>
<TONE CONTROL>
SHIFT
[FM/AM]
[CHANNEL]
FUNCTION
Press [DIMMER] .
The brightness of the display can be adjusted in three steps. The display can also be turned off.
Adjusting the speaker volume
1 Press <CH VOL> to select the speaker.
The settable speaker switches each time this button is pressed.
Selecting the play mode (PURE DIRECT)
This mode reproduces the sound with extremely high quality. The display that could affect the audio signals are turned “OFF”.
2 Use
<SELECT> to adjust the volume.
Can be adjusted within the range of –12 dB to +12 dB.
ENTER
MENU
STATUS
PURE DIRECT
[NUMBER]
(0 ~ 9, +10)
BAND
[MEMORY BLOCK]
FUNCTION
[DIMMER]
[VIDEO SELECT]
MODE
MEMORY
Press PURE DIRECT .
Setting the tone control
¢ Adjusting the tone
1 Press <TONE CONTROL>
“TREBLE”.
to select “BASS” or
2 Use <SELECT> to set the level.
Can be adjusted within the range of –10 dB to +10 dB.
Combining the currently playing sound with the desired image (VIDEO SELECT function)
Press [VIDEO SELECT] until the desired image appears on the display.
• To cancel, press [VIDEO SELECT] to select “SOURCE”.
• The video source selected with the video select function is stored in the memory for the different input sources.
TUNING
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit 13
ENGLISH
ENGLISH
Operation Operation
Listening to the radio
Check that the remote control unit is set to “A”.
Auto preset memory
This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the preset memory.
1
With the function set to “FM/AM”, press MENU .
• “Auto Preset” is displayed.
Auto tuning
1 Use FUNCTION
“FM/AM”.
or press [FM/AM] to select
2 Press BAND to select “AM” or “FM”.
3
Press MODE to set the auto tuning mode.
• The “AUTO” indicator lights.
4
Press TUNING .
• Automatic searching begins.
2 Press ENTER .
• The unit automatically begins searching for FM broadcast stations.
When the first FM broadcast station is found, that station is stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is completed.
• If tuning does not stop at the desired station, use to the “Manual tuning” operation.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Manual tuning
Preset memory
1 Use the “Auto tuning” or “Manual tuning” operation to tune in the station to be preset in the memory.
2 Press MEMORY .
3 Press [MEMORY BLOCK] ( A to G ) or SHIFT to select the desired memory block (A to G).
4 Press <PRESET> , [CHANNEL] or [NUMBER] to select the desired preset channel (1 to 8).
5 Press MEMORY again.
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.
• To interrupt this function, press <ON/STANDBY>.
1 Use FUNCTION
“FM/AM”.
or press [FM/AM] to select
2 Press BAND to select “AM” or “FM”.
3 Press MODE to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
¢ Default settings
A1 ~ A8
Auto tuner presets
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 ~ B8
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
4 Press TUNING .
The frequency changes continuously when the button is held in.
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.
Recalling preset stations
1 Press [MEMORY BLOCK] ( A to G ) or SHIFT to select the memory block.
2 Press
<PRESET>
, [CHANNEL] or [NUMBER] to select the desired preset channel.
14
ENGLISH
ENGLISH
Operation
FUNCTION
FUNCTION
STATUS
STATUS
XM RADIO TUNING
XM RADIO
ENTER
[D H F G]
ENTER
XM Satellite Radio
¢ ABOUT XM SATELLITE RADIO
XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan. XM’s dedication to playing the richest selection of music is matched by its passion for live sporting events, talk radio, up-to-theminute news, stand-up comedy, children’s programming, and much more. For U.S. customers, information about XM Satellite Radio is available online at www.xmradio.com. For Canadian customers, information about XM Canada is online at www.xmradio.ca.
¢ XM READY® LEGAL
Hardware and required monthly subscription sold separately. Other fees and taxes, including a one-time activation fee may apply.
Subscription fee is consumer only. All fees and programming subject to change. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling
1-800-XMRADIO (US residents) and 1-877-GET-XMSR (Canadian residents).
For a full listing of the XM commercial-free channels and advertisingsupported channels, visit lineup.xmradio.com (US residents) or xmradio.ca (Canadian residents).
Subscriptions subject to Customer Agreement available at xmradio.com (US residents) and xmradio.ca (Canadian residents).
Only available in the 48 contiguous United States and Canada. ©2006
XM Satellite Radio Inc. All rights reserved. All other trademarks are the property of their respective owners.
Operation
¢ XM READY® SUBSCRIPTIONS
Once you have installed the XM Mini-Tuner Dock, inserted the XM
Mini-Tuner, connected the XM Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three places to find your eight character XM Radio ID: on the XM Mini-Tuner, on the XM Mini-
Tuner package, and on XM Channel 0. Record the Radio ID in the following eight squares for reference.
Note: The XM Radio ID does not use the letters “I”, “O”, “S” or “F”.
Activate your XM Satellite Radio service in the U.S. online at http://activate.xmradio.com or call 1-800-XM-RADIO (1-800-967-
2346). You will need a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods you may need to keep your XM Ready home audio system on for up to an hour.
When you can access the full channel lineup on your XM Ready home audio system you are done. For more information or to subscribe in
Canada, visit XM on the Web at www.xmradio.ca or call XM’s Listener
Care at 1-877-GET-XMSR (1-877-438-9677).
[NUMBER]
(0 ~ 9, +10)
[SEARCH]
FUNCTION
TUNING
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
15
ENGLISH
Operation
Checking the XM signal strength and Radio ID
1 Use FUNCTION to select “XM” or press XM RADIO .
2 Press STATUS until “SIGNAL” is displayed.
• The display changes as shown below according to the receiving condition.
Display
GOOD
Condition
Signal strength is good
MARGINAL Signal strength is marginal
WEAK
NO
Signal strength is poor
Loss of the signal
ENGLISH
Operation
Channel selection
1 Use FUNCTION to select “XM” or press XM RADIO .
2 Press TUNING to reach the desired channel.
Channel number
X M 0 4 0 D e e p T r k s
¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡
Channel name
Song title / Artist name
The channel changes continuously when you press and hold
TUNING.
When the artist name and song title are received, they are displayed.
Direct access of channels
1 Press [SEARCH] in the XM mode.
X M___
DIRECT SEARCH
2
Press [NUMBER] to enter the desired channel.
For example, if you want to access channel 123 (ex.XM123) press [NUMBER] as shown below.
X M 0 0 1
DIRECT SEARCH
3 Adjust the antenna location until “SIGNAL:GOOD” is displayed.
4 Press STATUS until the XM channel (ex.XM001) is displayed.
5 Press TUNING to select channel 0 (XM000).
X M 0 0 0 R A D I O I D
¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ Radio ID
Category search
X M 0 1 2
DIRECT SEARCH
1
Press [F in the XM mode.
• The current category name is displayed.
X M 1 2 3
DIRECT SEARCH
X M 0 0 6 6 0 ' s
C A T : R o c k Channel category
(Remote control unit)
2 Press [F to select the category, and press D H to select the channel within the selected category.
• “LOADING” is displayed while receiving the channel or information.
• “UPDATING” is displayed while updating encryption code.
• When the selected channel is not available, “XM – – –” is displayed.
• Information on the artist name, song title, category and signal level can be checked using STATUS.
• The XM Satellite Radio channels can be preset in the same way as
AM/FM band.
• In addition to AM/FM band presetting, a total of 56 stations can be preset.
• “XM” can be selected directly by pressing XM RADIO.
3 Once all number have been input, press ENTER to change the channel.
If the next [NUMBER] is not pressed within several seconds, the channel automatically switches to the channel number that was input.
16
ENGLISH
ENGLISH
Operation
FUNCTION
MODE
MEMORY
STATUS
<SELECT>
ENTER
<ON/STANDBY>
[POWER OFF]
FUNCTION
MENU
STATUS
MENU
ENTER
[D H F G]
Operation
Playing the iPod
®
The music recorded on the iPod can be played when using a Control
Dock for iPod (ASD-1R, sold separately). The iPod can be controlled using the buttons on the main unit and the remote control unit.
Listening to music
1 Connect the DRA-697CI and iPod using the Control
Dock for iPod (ASD-1R) ( page 9).
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
2 Assign the input terminal at “Setting the iPod
Assignment” ( page 11).
With the iPod, non-copyrighted contents and contents that may be legally reproduced or played may be reproduced and played by individuals for their personal use. Violating copyrights is prohibited by law.
3 Use FUNCTION to select the function assigned in step 2.
• Display “Remote iPod” on the main unit’s display.
R e m o t e i P o d
If the screens above are not displayed, the iPod may not be properly connected. Check the connections and settings.
• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.
• To assign to a different function after a function has already been assigned, switch to a function other than the one that is assigned then repeat the procedure.
4 Operate using MENU , <SELECT> , [D
ENTER while watching the iPod’s screen.
F G and
NOTE:
• DENON will accept no responsibility whatsoever for loss or damage of data on an iPod occurring when the iPod is used connected to the DRA-697CI.
• Some of the functions may not operate, depending on the type of iPod and the software version.
• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.
MODE
MEMORY
FUNCTION
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
17
ENGLISH
Operation
Listening to music in the Browse mode
The mode switches between the Remote mode and the Browse mode if MODE is pressed for at least 2 seconds.
1
2
Use
<SELECT> or press [D H] to select the music file, then press ENTER or G] .
Press ENTER or G] .
• Playback starts.
• When STATUS is pressed during playback, the front panel display switches between the title name, artist name and album name.
• Depending on the iPod’s software version, it may not be possible to operate the iPod from the DRA-697CI. Use the latest version of the software. Information on the latest version of the software can be obtained on the Apple Computer website.
• With the DRA-697CI it is possible to display folder names and file names on the screen like titles. The DRA-697CI can display up to 64 characters, consisting of numbers, capital letters and small letters.
A “?” mark is displayed in place of non-compatible characters.
Pause:
Press ENTER during playback.
Press again to resume.
Manual search:
Viewing still pictures and videos (only for iPods equipped with the slideshow/video function)
Use this procedure to view photo and video data stored on the iPod on a monitor.
• D
• H
Track search:
1 Press MODE for at least 2 seconds to switch from the
Browse mode to the Remote mode.
• “Remote iPod” is displayed on the DRA-697CI’s display.
• D
• H
Stop:
Press ENTER for at least 2 seconds during playback.
Repeat play:
Press MODE.
The mode switches as follows each time MODE is pressed.
• Repeat One: Single track repeat
• Repeat All: All track repeat
Shuffle play:
Press MEMORY.
The mode switches as follows each time MEMORY is pressed.
• Shuffle Songs: Single track shuffle
• Shuffle Albums: Album shuffle
2 Watching the iPod’s screen, press [D to select
“Photos” or “Video”, then press ENTER .
• The iPod’s photo and video data are displayed on the monitor.
• To output photo or video data recorded on the iPod to the monitor, the iPod’s “TV Out” setting (under “Video Settings”) must be set to
“ON”.
For details, refer to the iPod’s operating instructions.
Disconnecting the iPod
MEMORY and ENTER can be used.
Press <ON/STANDBY> or [POWER OFF]
DRA-697CI’s power to the standby mode.
and set the
The iPod can be disconnected after switching to a function other than the one to which the iPod input is assigned.
18
ENGLISH
ENGLISH
Operation
ENGLISH
Operation
Multi zone music entertainment system
• When the outputs of the ZONE2 (ZONE3) OUT terminals are wired and connected to power amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2
(ZONE3) on the diagram below.)
• When a sold separately room-to-room remote control unit is wired and connected between the MAIN ZONE and ZONE2 (ZONE3), the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 (ZONE3) using the remote control unit.
To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable remote control unit.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
Multi-zone playback using the ZONE2 and ZONE3 PREOUT terminals
¢ When using the power amplifier as the MAIN ZONE output
• The DRA-697CI is equipped with pre-out terminals for which the volume is adjustable and video output terminals (composite) as the ZONE2
(ZONE3) output terminals, and variable output level as the ZONE2 (ZONE3) output terminals.
[System configuration and connections example]
Using external amplifier.
MAIN ZONE 2.1-channel system
Monitor
ZONE2
Monitor
ZONE3 video out
ZONE3
Monitor
ZONE2 video out
FL FR
Power
Amplifer
B
Power
Amplifer
B DVD player DRA-697CI
SW
Input
ZONE2 audio out
(Variable out) ZONE remote control unit
(RC-1056)
ZONE remote control unit
(RC-1056)
System remote control unit (RC-1052)
ZONE3 audio out (Variable out)
: Multi source video signal cable
: Multi source audio signal cable
: Room-to-room remote control system
(separately sold) control line
Refer to “Connections” ( page 9).
19
ENGLISH
Operation
Operation
FUNCTION
<ZONE/REC SELECT>
FUNCTION
[MODE SELECTOR 1]
[ZONE2 ON]
[ZONE2 OFF]
[CHANNEL]
[VOLUME]
[MODE SELECTOR 2]
Outputting a program source to amplifier, etc., in the ZONE2 (or ZONE3) room (ZONE2 or
ZONE3 SELECT mode)
1 Press <ZONE/REC SELECT> to select “M-ZONE”.
M-ZONE RECOUT
ENGLISH
Operation
Remote control unit operations during multisource playback
1 Set [MODE SELECTOR 1] to the “B”.
2 Set [MODE SELECTOR 2]
“ZONE3”.
to the “ZONE2” or
2 Use FUNCTION to select the source you want to output appears on the display.
• The “ ” indicator and the indicator for the selected source light.
3 Press [ZONE2 (ZONE3) ON] to turn on the zone power.
To cancel the ZONE2 or ZONE3 mode:
Press [ZONE2 OFF] or [ZONE3 OFF].
3 Start playing the source to be output.
For operating instructions, refer to the manuals of the respective components.
• The signals of the source selected in the ZONE mode are also output from the VCR and CD-R/TAPE recording output terminals.
4 Use [FUNCTION] to select the input source you wish to output.
• The “ source light.
” indicator and the indicator for the selected
The MULTI ZONE source switches directly.
When the MULTI ZONE SOURCE function is set to “FM/AM”, the preset channel can be selected pressing [CHANNEL].
5 The volume of the outputs of the different zones can be adjusted with [VOLUME] .
Default volume setting
ZONE2/ZONE3 : – – – dB (Minimum)
The zone volume can be adjusted within the range of –80 to 18 dB, in steps of 0.5 dB.
[ZONE3 OFF]
[ZONE3 ON]
• When using ZONE2 or ZONE3, it is possible to turn the power for the MAIN ZONE only on or off by pressing [MAIN ON/OFF].
FUNCTION
[MAIN ON/OFF]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
20
ENGLISH
ENGLISH
Operation
FUNCTION
<ZONE/REC SELECT>
<POWER>
<SPEAKER A, B>
FUNCTION
[MODE SELECTOR 1]
[ZONE2 OFF]
[NUMBER]
(0 ~ 9, +10)
[A]
FUNCTION
[MODE SELECTOR 2]
Recording (audio and/or video)
1 Press <ZONE/REC SELECT> appears on the display.
until “RECOUT”
M-ZONE RECOUT
Operation
About the memory functions
¢ Last function memory
The various settings set when the DRA-697CI’s power is switched to standby are stored in the memory. When the power is turned back on, the settings made when the power was switched to standby are recalled.
2 Use FUNCTION to select the source to be recorded
(audio and/or video).
• The “ ” indicator lights.
¢ Backup memory
The various settings are stored in the memory for about 1 week, even when the power is turned off or the power cord is unplugged.
3 Record (the audio or video signals).
For operations, see the operating instructions of the device from which you are recording (audio or video signals).
Initialization of the microprocessor
If the indication on the display is not normal or if the operation of the unit is not correct, then the microprocessor should be reset by the following procedure.
• To cancel, press <ZONE/REC SELECT> and set the function to “ZONE”.
NOTE:
• When the REC OUT mode is selected, FUNCTION (ZONE) cannot be operated.
1 Switch off the unit using <POWER> .
2 Press and hold in <SPEAKER A> , <SPEAKER B> and
<POWER> simultaneously until “PLEASE WAIT” is displayed.
• The microprocessor will be initialized.
[ZONE3 ON]
• If step 2 does not work, start over from step 1.
• If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory).
[D]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
21
ENGLISH
ENGLISH
Operating the remote control unit
Operating DENON audio components
1 Set [MODE SELECTOR 1] to “A” or “B”.
2 Set [MODE SELECTOR 2] component to be operated.
to the position for the
4 Referring to the included list of preset codes, press
[NUMBER] to input the preset code (a 3-digit number) for the manufacturer of the component whose signals you want to store in the memory.
5 To store the codes of another component in the memory, repeat steps 1 to 4.
3 Operate the audio component.
For details, refer to the component’s operating instructions.
While this remote control is compatible with a wide range of infrared controlled components, it may be the case that some component models cannot be operated with this remote control.
Setting the preset memory function
• DENON and other makes of components can be operated by setting the preset memory.
• This remote control unit can be used to operate components of other manufacturers without using the learning function by registering the manufacturer of the component as shown in the list of preset codes ( End of this manual).
• Operation is not possible for some models.
• The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental operation, cover the remote control unit’s transmitting window while setting the preset memory.
• Depending on the model and year of manufacture, this function cannot be used for some models, even if they are of makes listed in the list of preset codes.
• Some manufacturers use more than one type of remote control code. Refer to the included list of preset codes to change the number and verify correct operation.
• The preset memory can be set for one component only among the following: CD/iPod, DBS/CABLE and CD-R/TAPE.
Setting the punch through function
“Punch Through” is a function allowing you to operate
1
,
2
,
0
,
3
,
6
,
7
,
8 and
9 on CD, DVD/VDP, TAPE/CD-R/MD or VCR components when in the TV or DBS/CABLE mode. By default, nothing is set.
1 Set [MODE SELECTOR 1] to “A”.
2 Set [MODE SELECTOR 2] to the component to be registered (TV or DBS/CABLE).
3
Press [A] and [D] at the same time.
• The indicator starts flashing.
4 Input the number of the component you want to set.
CD
DVD/VDP
TAPE/CD-R/MD
VCR
No setting
No.
1
4
0
2
3
1 Set [MODE SELECTOR 1] to “A” or “B”.
Set to the A side for the CD/iPod, TV, DBS/CABLE or DVD position, and to the B side for the CD-R/TAPE or VCR position.
2 Set [MODE SELECTOR 2] registered.
to the component to be
3 Press [ZONE2 OFF] and [ZONE3 ON] at the same time.
• The indicator starts flashing.
1
Operating a component stored in the preset memory
Set [MODE SELECTOR 1] to “A” or “B”.
Set to the A side for the CD/iPod, TV, DBS/CABLE or DVD position, and to the B side for the CD-R/TAPE or VCR position.
2 Set [MODE SELECTOR 2] to the component you want to operate.
3 Operate the component.
For details, refer to the component’s operating instructions.
Some models cannot be operated with this remote control unit.
22
ENGLISH
ENGLISH
Operating the remote control unit
¢ Functions of buttons for the different devices
[Front]
Device operated
MODE SELECTOR 1
MODE SELECTOR 2
OFF
ON
CHANNEL –
CHANNEL +
1
2
3 , A/B
0 , SKIP +
6
7
8 , VCR CH –
9 , VCR CH +
MENU
DIMMER
ENTER
STATUS
VIDEO SELECT
PURE DIRECT
CD player or iPod
Search (forward)
Skip (reverse)
Skip (forward)
Menu
Cursor operation
Dimmer
Enter
Status
Video selection
Pure direct
CD/iPod
Power off
Power on
Preset –
Preset +
Play
Stop
Pause
Disc skip +
Search (reverse)
TV
(Monitor)
Punch through
Punch through
Punch through
Menu
Cursor operation
Dimmer
Enter
Display
Return
Pure direct
TV
–
Power on
TV channels –
TV channels +
Punch through
Punch through
Punch through
Punch through
Punch through
Punch through
Punch through
Punch through
Menu
Cursor operation
Dimmer
Enter
Display
Return
Pure direct
Satellite tuner
A
DBS/CABLE
Cable TV
–
Power on
–
Power on
Channels –
Channels +
Punch through
Punch through
Punch through
Punch through
Punch through
Channels –
Channels +
Punch through
Punch through
Punch through
Punch through
Punch through
Punch through
Punch through
Punch through
Menu
Cursor operation
Dimmer
Enter
Display
Return
Pure direct
Operating the remote control unit
DVD player CD recorder
DVD
Power off
Power on
Preset –
Preset +
Play
Stop
Pause
Disc skip +
Search (reverse)
Search (forward)
Skip (reverse)
Skip (forward)
Top menu
Cursor operation
Menu
Enter
Display
Return
Set up
Search (forward)
Skip (reverse)
Skip (forward)
Menu
Cursor operation
Dimmer
Enter
Status
Video selection
Pure direct
Power off
Power on
Preset –
Preset +
Play
Stop
Pause
–
Search (reverse)
Tape deck MD recorder
Fast forward
–
–
Menu
Cursor operation
Dimmer
Enter
Status
Video selection
Pure direct
CD-R/TAPE
Power off
Power on
Preset –
Preset +
Forward play
Stop
A/B switching
Reverse play
Rewind
B
Search (forward)
Skip (reverse)
Skip (forward)
Menu
Cursor operation
Dimmer
Enter
Status
Video selection
Pure direct
Power off
Power on
Preset –
Preset +
Play
Stop
Pause
–
Search (reverse)
Video deck
Search (forward)
Channel –
Channel +
–
–
Dimmer
–
–
–
Pure direct
VCR
–
Power on
TV channels –
TV channels +
Play
Stop
Pause
–
Search (reverse)
23
ENGLISH
Operating the remote control unit
[Rear]
Device operated
MODE SELECTOR 1
MODE SELECTOR 2
NUMBER (0 ~ 9, +10)
BAND
A, AUDIO
B, SUBTITLE
C, ANGLE
D, PICT ADJ.
E, S.MODE
TUNING +
TUNING –
Default setting
(Preset code)
Special remarks
CD player or iPod
CD/iPod
Channels
FM/AM switching
Memory block
Memory block
Memory block
Memory block
Memory block
Tuning +
Tuning –
DENON
(111) q
TV
(Monitor)
TV
Channels
TV/VCR switching
–
–
–
–
–
TV volume +
TV volume –
HITACHI
(134) q
, e
Satellite tuner
–
–
Cable TV
A
Channels
DBS/CABLE
TV/VCR switching
Channels
TV/VCR switching
–
–
–
–
–
Volume +
Volume –
–
–
–
–
Volume +
Volume –
ABC
(007) q
, e
DVD player
DVD
Channels
TV/VCR switching
Audio
Subtitle
Angle
Picture adjust
Search mode
TV volume +
TV volume –
DENON
(111) q
, w
CD recorder
Channels
FM/AM switching
Memory block
Memory block
Memory block
Memory block
Memory block
Tuning +
Tuning –
–
Special remarks: q
It is only possible to set the preset memory for one device per mode. When a new code is preset, the previous code is automatically deleted.
w Note that the function names of the DVD buttons on the remote control unit may differ for some brands. Check beforehand.
e
The CD, TAPE/CD-R/MD, VCR or DVD/VDP buttons can be assigned to a TV or satellite tuner (or cable TV) ( page 22).
Tape deck MD recorder
CD-R/TAPE
Channels
FM/AM switching
Memory block
Memory block
Memory block
Memory block
Memory block
Tuning +
Tuning –
DENON
(114) q
B
Channels
FM/AM switching
Memory block
Memory block
Memory block
Memory block
Memory block
Tuning +
Tuning –
–
ENGLISH
Operating the remote control unit
Video deck
VCR
Channels
TV/VCR switching
–
–
–
–
–
TV volume +
TV volume –
HITACHI
(108) q
24
ENGLISH
ENGLISH
Troubleshooting
If a problem should arise, first check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the Operating Instructions?
3. Are the speakers and other components operating properly?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
Symptom
Display not lit and sound not produced when
POWER switch set to on.
Display lit but sound not produced.
Cause Measures
• Power supply cord not plugged in securely.
• Check the insertion of the power supply cord plug.
Nothing is displayed on monitor.
Copying from DVD to
VCR is not possible.
No sound is produced from subwoofer.
• Speaker cables not securely connected.
• FUNCTION knob position is not appropriate.
• Volume control set to minimum.
• MUTING is on.
• Connect securely.
• Switch to the proper position.
• Turn volume up to suitable level.
• Switch off MUTING.
• DRA-697CI’s video output terminals and monitor’s input terminals are not properly connected.
• Monitor’s input setting is wrong.
• Check that the connections are correct.
• Set the monitor’s input selector to the terminals to which video signals are connected.
• Copying between a source such as
DVD and a VCR is not usually possible, as DVDs are often encoded with copy-protection signals that prevent VCR recording.
• Copying is not possible.
• Subwoofer’s power is not on.
• Subwoofer’s output is not connected.
• The subwoofer’s channel volume level is set to “–12 dB”.
• Turn on the power.
• Connect properly.
• Turn the subwoofer’s channel volume level up.
Page
10
6
12
12
12
6
—
—
—
6
13
Symptom
This unit does not operate properly when remote control unit is used.
Power has turned off and the power indicator is blinking red.
“CHECK ANTENNA” is displayed in the XM mode.
“NO SIGNAL” is displayed in the XM mode.
“OFF AIR” is displayed in the XM mode.
Receiving only XM channels 0 and 1.
Cause Measures
• Batteries dead.
• Remote control unit too far from this unit.
• Obstacle between this unit and remote control unit.
• Different button is being pressed.
• < and > ends of batteries inserted in reverse.
• Replace with new batteries.
• Move closer.
• Remove obstacle.
• Press the proper button.
• Insert batteries properly.
Troubleshooting
Page
2
2
—
—
2
• The set’s internal temperature has risen and the protection circuit has been activated.
• The core wires of the speaker cables are touching each other or the DRA-
697CI’s rear panel, activating the protection circuit.
• DRA-697CI is malfunctioning.
• Put the DRA-697CI in a wellventilated place.
• Turn off the power, then wait for the set to fully cool off before turning the power back on.
• Check the connections of all the speaker cables.
• Turn off the power and contact a
DENON customer service center.
• DRA-697CI’s XM connectors and the
XM Mini-Tuner and Home Dock is not properly connected.
• Check that the connection are correct.
• The signal cannot be received.
• Reposition your XM Mini-Tuner and
Home Dock.
2, 6
6
6
6
8
8, 15
• The selected channel is not currently broadcasting.
• Select the another channel.
• The XM Tuner is not activated.
• Contact XM Radio.
16
8, 15
25
ENGLISH
Specifications
¢ Audio section
• Power amplifier
Rated output:
Output terminals:
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
A or B 4 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
• Analog
(LINE input-PRE OUT)
Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms
Frequency response:
S/N:
10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
98 dB (IHF-A weighted) (TONE DEFEAT ON)
Total harmonic distortion:
Rated output:
0.009 % (–3 dB at rated output) (1 kHz)
1.2 V
¢ Video section
• Standard video terminals
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
¢ Tuner section
[FM]
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
87.5 MHz ~ 107.9 MHz
1.0 µV (11.2 dBf)
MONO
STEREO
MONO
STEREO
Total Harmonic Distortion (at 1 kHz): MONO
STEREO
1.6 µV (15.3 dBf)
23 µV (38.5 dBf)
77 dB (IHF-A weighted)
72 dB (IHF-A weighted)
0.15 %
0.3 %
¢ General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
[AM]
520 kHz ~ 1710 kHz
18 µV
AC 120 V, 60 Hz
4.2 A
1 W Max (Standby)
434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)
10.5 kg
¢ Remote control unit (RC-1052)
Batteries:
External dimensions:
R6P/AA Type (Two batteries)
52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Mass: 175 g (Approx. 6.2 oz) (included batteries)
¢ ZONE remote control unit (RC-1056)
Batteries: R03/AAA Type (Two batteries)
External dimensions:
Mass:
54 (W) x 115 (H) x 23 (D) mm (2-1/8” x 4-17/32” x 29/32”)
80 g (Approx. 2.8 oz) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
26
ENGLISH
ENGLISH
ENGLISH
VDP
Denon
Magnavox
Mitsubishi
Panasonic
Philips
Pioneer
RCA
Sony
VCR
Admiral
Aiko
Aiwa
Akai
¢ List of preset codes
DVD
Denon
Aiwa
Hitachi
JVC
Konka
Magnavox
Mitsubishi
Panasonic
Philips
Pioneer
Sanyo
Sony
Toshiba
Zenith
014, *[111]
009
010
006, 011
012, 013
005
004
014
005, 015, 016, 017
003, 008
018
002, 019, 020
001, 021, 022
023
Alba
Amstrad
028, 029, 112
026
028
029, 030
026
028, 031
032
033, 034, 035, 036
081
095
009
026, 027, 070, 072, 082,
083, 084
055
009
ASA
Asha
Audio Dynamic
Audiovox
Beaumark
Broksonic
Calix
Candle
Canon
Capehart
Carver
CCE
Citizen
Craig
Curtis Mathes
Cybernex
Daewoo
Daytron
DBX
Dumont
Dynatech
Electrohome
Electrophonic
Emerson
Fisher
GE
042
087
005, 085
088
087
086, 093
088
006, 087, 088, 089, 090
049, 057
025, 055, 056, 071
015
095
006, 007, 087, 088, 089,
090, 095
007, 087, 088, 091, 115
006, 049, 073, 080, 087,
090, 092
087
025, 055, 059, 074, 089,
093, 095, 096
025, 055
005, 085
053
009
001, 088, 097
088
001, 009, 017, 027, 086,
088, 089, 092, 093, 097,
100, 101, 102, 103, 104,
117
009, 028, 031, 053, 054,
091, 099, 115
007, 011, 049, 050, 051,
052, 073, 080, 087
Go Video
Goldstar
Gradiente
Grundig
Harley Davidson
Harman Kardon
Hi-Q
Hitachi
JC Penny
Jensen
JVC
Kenwood
Kodak
Lloyd
LXI
Magnavox
Magnin
Marantz
Marta
MEI
Memorex
Metz
MGA
MGN Technology
Midland
1
PRESET CODE
047, 048
000, 006, 012, 062, 088
094
042
094
040, 062
091
009, 013, 023, 026, 058,
*[108], 109, 110, 111
004, 005, 007, 023, 028,
049, 062, 085, 087, 088
013, 026
004, 005, 006, 026, 029,
043, 044, 045, 046, 085
004, 005, 006, 026, 029,
033, 045, 085, 090
088
009, 094
088
015, 016, 042, 049, 063,
106
087
004, 005, 006, 015, 042,
049, 085, 090
088
049
009, 033, 049, 053, 060,
081, 087, 088, 091, 094,
115
123, 124, 125, 126, 127,
128
001, 017, 027, 041, 097
087
011
Minolta
Mitsubishi
Motorola
Montgomery Ward
MTC
Multitech
NAD
NEC
Nikko
Noblex
Optimus
Optonica
Panasonic
Perdio
Pentax
Philco
Philips
Pilot
Pioneer
Portland
Proscan
Pulsar
Quartz
Quasar
Radio Shack
013, 023
001, 003, 008, 013, 014,
017, 027, 029, 039, 040,
041, 045, 097
081
001, 002, 007, 009, 049,
063, 081, 115, 117
009, 087, 094
007, 009, 011, 087, 090,
094
038
004, 005, 006, 018, 026,
029, 045, 061, 062, 085
088
087
081, 088
021
024, 049, 064, 066, 067,
068, 069, 107
009
009, 013, 023, 058, 090
015, 016, 049
015, 021, 042, 049, 105
088
005, 013, 029, 036, 037,
038, 045, 085
025, 055, 090
063, 080
060
033
034, 035, 049
001, 002, 021, 081, 087,
088, 091, 094, 097, 098,
115
Radix
Randex
RCA
Realistic
Ricoh
Salora
Samsung
Sanky
Sansui
Sanyo
SBR
Scott
Sears
Sentra
Sharp
Shogun
Sony
STS
Sylvania
Symphonic
Tandy
Tashiko
Tatung
Teac
088
088
007, 013, 019, 023, 058,
063, 064, 065, 073, 080,
082, 087
009, 021, 031, 033, 049,
053, 081, 087, 088, 091,
094, 097, 098
055
033, 041
007, 011, 051, 059, 070,
083, 087, 089, 113
081
005, 026, 029, 045, 061,
085, 114
032, 033, 053, 087, 091,
115, 116
042
017, 020, 086, 089, 093,
117
013, 023, 028, 031, 033,
053, 054, 088, 091, 098,
099, 115
055
001, 002, 021, 097
087
075, 076, 077, 078, 079,
121, 122
023
009, 015, 016, 017, 041,
049, 094
009, 094
009
009, 088
004, 026, 030
004, 009, 026, 094
Technics
Teknika
TMK
Toshiba
Totevision
Unirech
Vecrtor Research
Victor
Video Concepts
Videosonic
Wards
XR-1000
Yamaha
Zenith
024, 049
009, 010, 022, 049, 088,
094
087, 092
013, 017, 020, 041, 059,
089, 098, 099, 117
007, 087, 088
087
005, 062, 085, 089, 090
005, 045, 046, 085
005, 027, 085, 089, 090
007, 087
013, 021, 023, 087, 088,
089, 091, 094, 097, 118,
119, 120
094
004, 005, 006, 026, 062,
085
060, 078, 079
TV
Admiral
Adventura
Aiko
Akai
Alleron
A-Mark
Amtron
Anam
Anam National
AOC
Archer
Audiovox
Bauer
Belcor
045, 121
122
054
016, 027, 046
062
007
061
006, 007, 036
061, 147
003, 007, 033, 038, 039,
047, 048, 049, 133
007
007, 061
155
047
Bell & Howell
Bradford
Brockwood
Candle
Capehart
Celebrity
Circuit City
Citizen
Concerto
Colortyme
Contec
Cony
Craig
Crown
Curtis Mathes
Daewoo
Daytron
Dimensia
Dixi
Electroband
Electrohome
Elta
Emerson
Envision
Etron
Fisher
Formenti
Fortress
2
PRESET CODE
045, 118
061
003, 047
003, 030, 031, 032, 038,
047, 049, 050, 122
003
046
003
029, 030, 031, 032, 034,
038, 047, 049, 050, 054,
061, 095, 122, 123
031, 047, 049
003, 047, 049, 135
013, 051, 052, 061
051, 052, 061
004, 061
029
029, 034, 038, 044, 047,
049, 053, 095, 118
027, 029, 039, 048, 049,
054, 055, 106, 107, 137
003, 049
044
007, 015, 027
046
029, 056, 057, 058, 147
027
029, 051, 059, 060, 061,
062, 118, 123, 124, 139,
148
038
027
014, 021, 063, 064, 065,
118
155
012
ENGLISH
Fujitsu
Funai
Futuretech
GE
Goldstar
Grundy
Hitachi
Hitachi Pay TV
Infinity
Janeil
JBL
JC Penny
JCB
JVC
Kawasho
Kenwood
Kloss
Kloss Novabeam
KTV
Loewe
Logik
Luxman
LXI
004, 062
004, 062
004
020, 036, 037, 040, 044,
058, 066, 088, 119, 120,
125, 147
000, 015, 029, 031, 039,
048, 051, 056, 057, 067,
068, 069, 116
062
029, 031, 051, 052, 070,
111, 112, 113, 124,
*[134]
151
017, 071
122
017, 071
020, 034, 039, 040, 041,
044, 048, 050, 058, 066,
069, 076, 088, 090, 095,
125, 136, 159
046
019, 051, 052, 072, 073,
091, 117, 126
018, 046
038, 056, 057
010, 032
005, 122, 127, 131
074, 123
071
144
031
008, 014, 017, 024, 040,
044, 063, 071, 075, 076,
077, 118, 125
ENGLISH
Magnavox
Marantz
Matsui
Memorex
Metz
MGA
Midland
Minutz
Mitsubishi
Montgomery Ward
Motorola
MTC
NAD
National
National Quenties
NEC
Nikko
NTC
Optimus
Optonica
Orion
Panasonic
Philco
005, 010, 017, 030, 033,
038, 050, 056, 071, 078,
079, 085, 089, 108, 109,
110, 127, 131, 132, 145
015, 017, 071, 080
027
014, 027, 045, 083, 118,
144
160, 161, 162, 163
001, 039, 048, 056, 057,
058, 065, 081, 083
125
066
001, 016, 039, 048, 056,
057, 058, 065, 081, 082,
083, 105
011, 020, 144, 145, 146
121, 147
031, 034, 039, 048, 095
008, 075, 076, 128
002, 036, 061, 147
002
031, 038, 039, 048, 057,
084, 086, 135, 147
054
054
128
011, 012, 093, 121
004, 139
002, 009, 017, 036, 037,
071, 141, 143, 147
005, 010, 030, 050, 051,
056, 079, 085, 127, 131,
132, 145, 147
Philips
Pioneer
Portland
Price Club
Proscan
Proton
Pulsar
Quasar
Radio Shack
RCA
Realistic
Saisho
Samsung
Sansui
Sanyo
SBR
Schneider
Scott
Sears
Sharp
Siemens
Signature
Simpson
Sony
Soundesign
Spectricon
005, 015, 017, 050, 051,
056, 078, 087, 088, 089,
131, 132, 147
124, 128, 142
054
095
040, 044, 125
035, 051, 092, 129
042
036, 037, 074, 141
011, 044, 063, 093, 118
040, 044, 125, 130, 137,
151, 152
014, 063, 093, 118
027
003, 015, 034, 053, 055,
057, 094, 095, 136, 153
139
013, 014, 021, 022, 063,
064, 081, 096
015
015
062
008, 014, 021, 022, 023,
024, 025, 040, 052, 057,
062, 063, 064, 065, 073,
075, 076, 097, 098, 125,
159
011, 012, 013, 026, 093,
099, 100, 104, 121
013
045, 144
050
043, 046, 138, 146, 150
030, 050, 062
007, 033
Squareview
Supre-Macy
Supreme
Sylvania
Symphonic
Tandy
Tatung
Technics
Teknika
Tera
THOMSON
Toshiba
Universal
Victor
Video Concepts
Viking
Wards
Zenith
Zonda
CABLE
ABC
Archer
Century
Citizen
Colour Voice
Comtronic
3
PRESET CODE
004
032, 122
046
005, 010, 017, 030, 078,
079, 085, 089, 101, 127,
131, 132, 145, 155
004, 148
012, 121
036, 124
037
001, 030, 032, 034, 052,
054, 078, 083, 095, 144,
156, 157
035, 129
165, 166
008, 014, 034, 063, 075,
076, 095, 097, 136, 158,
159
020, 066, 088
019, 073, 126
016
032, 122
005, 045, 066, 078, 085,
088, 089, 093, 102, 103,
131, 132, 148
042, 114, 115, 140, 144,
149
007
006, *[007], 008, 009
010, 011
011
011
012, 013
014
Eastern 015
Garrard
Gemini
011
030, 033, 034
General Instrument 030, 031, 032
Hytex 006
Jasco
Jerrold
Magnavox
Movie Time
NSC
Oak
Panasonic
Philips
011
009, 016, 017, 026, 032
018
019
019
000, 006, 020
001, 005
011, 012, 013, 018, 021
Pioneer
RCA
Regency
Samsung
Scientific Atlanta
Signal
SL Marx
Starcom
Stargate
Teleview
Tocom
TV86
Unika
United Artists
Universal
Viewstar
Zenith
002, 003, 022
029
015
014, 023
004, 024, 025
014
014
009
014
014
007, 016
019
011
006
010, 011
018, 019
027, 028
DBS (SATELLITE)
Alphastar 054
Chaparral
Dishnet
Drake
035, 036
053
037, 038
CD
Denon
Aiwa
Burmster
Carver
Emerson
Fisher
JVC
Kenwood
RCA
Realistic
Sierra I
Sierra II
Sierra III
Sony
STS1
STS2
STS3
SRS4
Technisat
Toshiba
Uniden
Echostar Dish 062, 066
GE 048, 055, 056
General Instruments 039, 040, 041
Grundig
Hitachi
070, 071, 072, 073
058, 059
Hughes Network
JVC
Kathrein
Magnavox
Nokia
Philips
Primestar
Proscan
063, 064, 065, 069
057
074, 075, 076, 083
060
070, 080, 084, 085, 086
060
051
048, 055, 056
048, 055, 056, 068
042
036
036
036
049, 067
043
044
045
046
077, 078, 079, 081, 082
047, 050
061
*[111], 044
001, 035, 043
002
003, 035
004, 005, 006, 007
003, 008, 009, 010
018, 019
011, 012, 013, 014, 017
ENGLISH
MD
Denon
Kenwood
Onkyo
Sharp
Sony
TAPE
Denon
Aiwa
Carver
Harman/Kardon
JVC
Kenwood
Magnavox
Marantz
Onkyo
Magnavox
Marantz
MCS
Onkyo
Optimus
Philips
Pioneer
Sears
Sony
Teac
Technics
Wards
Yamaha
Zenith
CDR
Denon
Philips
*[111], 112
112
113
003, 004
007
005
006
*[114]
010, 011
011
011, 012
013, 014
015
011
011
025, 027
006, 015, 035
016, 028, 035
016, 024
025, 027
017, 020, 021, 022, 023
014, 032, 033, 035
006, 022, 030
006
023, 031
002, 009, 028
016, 029, 036
035, 037
038, 039, 040, 041
042
4
PRESET CODE
Optimus
Panasonic
Philips
Pioneer
Sony
Technics
Victor
Wards
Yamaha
016, 017
021
011
016, 017, 018
022, 023, 024
021
013
016
019, 020
*[ ] : Preset codes set upon shipment from the factory.
DVD preset codes
111 (default)
DVD-555
DVD-755
DVD-900
DVD-910
DVD-955
DVD-1000
DVD-1200
DVD-1500
DVD-1710
DVD-1910
DVD-2200
DVD-2800
DVD-2800 II
DVD-2900
DVD-2910
DVD-3800
DVD-3910
DVD-5900
DVD-5910
DVD-9000
DVM-715
DVM-1800
DVM-1805
DVM-1815
DVM-2815
DVM-4800
014
DVD-800
DVD-1600
DVD-2000
DVD-2500
DVD-3000
DVD-3300
TOKYO, JAPAN www.denon.com
Denon Brand Company, D&M Holdings Inc.
Printed in China 00D 511 4538 007
advertisement